The newly added OTG support has an obvious uninitialized variable
access that gcc warns about:
drivers/phy/phy-rockchip-inno-usb2.c: In function 'rockchip_chg_detect_work':
drivers/phy/phy-rockchip-inno-usb2.c:717:7: error: 'tmout' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This replaces the use of the uninitialized variable with what
the value was in the previous USB_CHG_STATE_WAIT_FOR_DCD
state.
Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/phy/phy-rockchip-inno-usb2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
index eb89de59b68f..2f99ec95079c 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -714,7 +714,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
delay = CHG_SECONDARY_DET_TIME;
rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
} else {
- if (tmout) {
+ if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
/* floating charger found */
rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
rphy->chg_state = USB_CHG_STATE_DETECTED;
--
2.9.0
When USB is disabled, we get a link error for this driver
because of the added OTG support
drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_otg_sm_work':
phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_otg_sm_work+0x1f4): undefined reference to `usb_otg_state_string'
drivers/phy/phy-rockchip-inno-usb2.o: In function `rockchip_usb2phy_probe':
phy-rockchip-inno-usb2.c:(.text.rockchip_usb2phy_probe+0x2c8): undefined reference to `of_usb_get_dr_mode_by_phy'
Other phy drivers select USB_COMMON for this, so let's do the same
here.
Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/phy/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 13411960895f..53cab9f3323b 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -365,7 +365,9 @@ config PHY_ROCKCHIP_INNO_USB2
tristate "Rockchip INNO USB2PHY Driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
depends on COMMON_CLK
+ depends on USB_SUPPORT
select GENERIC_PHY
+ select USB_COMMON
help
Support for Rockchip USB2.0 PHY with Innosilicon IP block.
--
2.9.0
Hi Arnd,
在 2016年11月16日 22:22, Arnd Bergmann 写道:
> The newly added OTG support has an obvious uninitialized variable
> access that gcc warns about:
>
> drivers/phy/phy-rockchip-inno-usb2.c: In function 'rockchip_chg_detect_work':
> drivers/phy/phy-rockchip-inno-usb2.c:717:7: error: 'tmout' may be used uninitialized in this function [-Werror=maybe-uninitialized]
>
> This replaces the use of the uninitialized variable with what
> the value was in the previous USB_CHG_STATE_WAIT_FOR_DCD
> state.
>
> Fixes: 0c42fe48fd23 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> drivers/phy/phy-rockchip-inno-usb2.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
> index eb89de59b68f..2f99ec95079c 100644
> --- a/drivers/phy/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/phy-rockchip-inno-usb2.c
> @@ -714,7 +714,7 @@ static void rockchip_chg_detect_work(struct work_struct *work)
> delay = CHG_SECONDARY_DET_TIME;
> rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
> } else {
> - if (tmout) {
> + if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
> /* floating charger found */
> rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
> rphy->chg_state = USB_CHG_STATE_DETECTED;
Thanks very much for your help.
Reviewed-by: William Wu <[email protected]>
Best Regards,
wulf