Current state of affairs with the SiS/Trident driver tests on this (damn
annoying) machine.
Any suggestions where to go from here? Recommendations of where to look?
Anything I can test, probe, send the output of? I'm starting to think it's
a PCI addressing problem caused in part by the PnP BIOS. There isn't any
option to disable the PCI PnP BIOS, otherwise I'd have tried that already.
Going to try removing the FireWire expansion and see if that will change
things (by giving me back another interrupt that is).
With 2.4.13: Loads but no sound.
(Fixed the PCI_VENDOR_ID_SI and the device array trailing {0,})
With 2.4.13-ac4: Does not load: "trident: can't allocate I/O space at 0x1000"
(Fixed the PCI_VENDOR_ID_SI)
With 2.4.9: kernel oops.
(Fixed the PCI_VENDOR_ID_SI and the device array trailing {0,})
With 2.4.7: Loads but no sound.
(Fixed the PCI_VENDOR_ID_SI)
All drivers that load produce the following output (well the
version/compile time is different):
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
0.14.9d, 17:16:29 Oct 29 2001
PCI: Found IRQ 5 for device 00:01.4
PCI: Sharing IRQ 5 with 00:0c.1
trident: SiS 7018 PCI Audio found at IO 0x1000, IRQ 5
ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
Kernel oops from 2.4.9:
Trident 4DWave/SiS 7018/ALi 5451 PCI Audio, version 0.14.9b, 13:49:46 Oct
30 2001
PCI: Found IRQ 5 for device 00:01.4
PCI: Sharing IRQ 5 with 00:0c.1
trident: SiS 7018 PCI Audio found at IO 0x1000, IRQ 5
ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
cf82ad86
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<cf82ad86>]
EFLAGS: 00010297
eax: 00000000 ebx: ceeed980 ecx: 02000040 edx: 00001044
esi: 000001ec edi: 00000029 ebp: 00000000 esp: cdebfe6c
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 220, stackpage=cdebf000)
Stack: ceeed980 000001ec 00000029 cf82acec ceeed980 cf82be60 cf82bb4d
00000000
00000000 cf82be4a 02000000 00000000 ceeed980 ce7e6800 00000000
00000000
cf832ab4 ceeed980 cf833bc0 cef64c00 ce7e6800 00000000 ceeed980
cf832ed0
Call Trace: [<cf82acec>] [<cf82be60>] [<cf82bb4d>] [<cf82be4a>] [<cf832ab4>]
[<cf833bc0>] [<cf832ed0>] [<cf832f34>] [<cf833c08>] [<cf833d60>]
[pci_announce_device+54/84]
[<cf833c08>] [<cf833d60>] [pci_register_driver+72/96] [<cf833d60>]
[<cf833127>] [<cf833d60>]
[<cf8339a0>] [sys_init_module+1285/1448] [<cf82e060>] [system_call+51/56]
Code: 83 38 00 74 08 53 8b 00 ff d0 83 c4 04 31 ff ba e0 c0 82 cf
Output of 'lspci -bv' from 2.4.13-ac4:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
Flags: bus master, medium devsel, latency 128
Memory at 30000000 (32-bit, non-prefetchable)
Capabilities: [c0] AGP version 2.0
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 80 [Master])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2200
Flags: bus master, fast devsel, latency 16
I/O ports at 1100
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Flags: bus master, medium devsel, latency 0
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet (rev 82)
Subsystem: CLEVO/KAPOK Computer: Unknown device 2200
Flags: bus master, medium devsel, latency 128, IRQ 9
I/O ports at 3000
Memory at 34000000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
(prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] 7001
Flags: bus master, medium devsel, latency 128, IRQ 255
Memory at 34001000 (32-bit, non-prefetchable)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
(prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS]: Unknown device 7000
Flags: bus master, medium devsel, latency 128, IRQ 255
Memory at 34002000 (32-bit, non-prefetchable)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS
PCI Audio Accelerator (rev 02)
Subsystem: CLEVO/KAPOK Computer SiS PCI Audio Accelerator
Flags: bus master, medium devsel, latency 128, IRQ 5
I/O ports at 1000
Memory at 34003000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013 (rev
a0) (prog-if 00 [Generic])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2200
Flags: bus master, medium devsel, latency 128, IRQ 9
I/O ports at 3200
I/O ports at 3300
Capabilities: [48] Power Management version 2
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if
00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: 50000000-560fffff
Prefetchable memory behind bridge: 40000000-4f0fffff
00:0c.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: CLEVO/KAPOK Computer: Unknown device 2200
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:0c.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: CLEVO/KAPOK Computer: Unknown device 2200
Flags: bus master, medium devsel, latency 168, IRQ 5
Memory at 10001000 (32-bit, non-prefetchable)
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00:0d.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020
(prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 8586
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at e910f000 (32-bit, non-prefetchable)
Memory at e9100000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 1
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630
GUI Accelerator+3D (rev 31) (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer: Unknown device 2200
Flags: 66Mhz, medium devsel
BIST result: 00
Memory at 40000000 (32-bit, prefetchable)
Memory at 50000000 (32-bit, non-prefetchable)
I/O ports at a000
Capabilities: [40] Power Management version 1
Capabilities: [50] AGP version 2.0
AMC Enterprises P/L - Stuart Young
First Floor - Network and Systems Admin
3 Chesterville Rd - [email protected]
Cheltenham Vic 3192 - Ph: (03) 9584-2700
http://www.amc.com.au/ - Fax: (03) 9584-2755
> PCI: Sharing IRQ 5 with 00:0c.1
> trident: SiS 7018 PCI Audio found at IO 0x1000, IRQ 5
> ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
It's failing to initialise the AC97 codec. That may be timing (try longer
delays for one). Also try load, unload, load sequences. It may be the ac97
is wired strangely on your box.
At 09:24 AM 30/10/01 +0000, Alan Cox wrote:
> > PCI: Sharing IRQ 5 with 00:0c.1
> > trident: SiS 7018 PCI Audio found at IO 0x1000, IRQ 5
> > ac97_codec: AC97 codec, id: 0x0000:0x0000 (Unknown)
>
>It's failing to initialise the AC97 codec. That may be timing (try longer
>delays for one). Also try load, unload, load sequences. It may be the ac97
>is wired strangely on your box.
Tried load/unload/load sequences with no luck. Tried increasing all the
relevant delays within the ac97 and trident drivers, and while I think I've
found a bug in a small part of the ac97 driver (trivial, will post soon,
but isn't causing my problem), still no luck (even with load/unload/load
again). Any suggestions on where I should try delays in the code?
If this is a weird ac97 implementation, any suggestions on how I'd go about
figuring it out? Possible diagnosis utils and the like are always a boon,
even if I have to run Windows on the thing and figure out how it's doing
it. Since I have 2 of these machines, I can always run them in parallel and
compare stuff between.
Many thanks.
AMC Enterprises P/L - Stuart Young
First Floor - Network and Systems Admin
3 Chesterville Rd - [email protected]
Cheltenham Vic 3192 - Ph: (03) 9584-2700
http://www.amc.com.au/ - Fax: (03) 9584-2755