On Sat, Jul 28, 2012 at 4:42 AM, Jiang Liu <[email protected]> wrote:
> The first is an ACPI hotplug slot enumerator, which enumerates ACPI hotplug
> slots on load and provides callbacks to manage those hotplug slots.
> An ACPI hotplug slot is an abstraction of receptacles, where a group of
> system devices could be connected to. This patch implements the skeleton for
> ACPI system device hotplug slot enumerator. On loading, the driver scans the
> whole ACPI namespace for hotplug slots and creates a device node for each
> hotplug slots. Every slot is associated with a device class named
> acpihp_slot_class and will be managed by ACPI hotplug drivers.
I was thinking:
We can have module in ACPI DSDT, and every module is coresponding
to SystemModule.
so it will be
\_SB.NOD1
CPU0
CPU1
CPU2
CPU3
MEM0
MEM1
MEM2
MEM3
PCI0
PCI1
PCI2
PCI3
NTFY
STAT
STOP
NTFY will be something like:
Notify(\_SB.NOD1.CPU0,....)
Notify(\_SB.NOD1.CPU1,....)
Notify(\_SB.NOD1.CPU2,....)
Notify(\_SB.NOD1.CPU3,....)
Notify(\_SB.NOD1.MEM0,....)
Notify(\_SB.NOD1.MEM1,....)
Notify(\_SB.NOD1.MEM2,....)
Notify(\_SB.NOD1.MEM3,....)
Notify(\_SB.NOD1.PCI0,....)
Notify(\_SB.NOD1.PCI1,....)
Notify(\_SB.NOD1.PCI2,....)
Notify(\_SB.NOD1.PCI3,....)
and will link GPE button for SystemModule to call NTFY.
STAT could be 32bit integer for final turn off the power.
every CPU, MEM, PCI will own one bit, it will clear that bit in this own
_EJ0.
Every _EJ0 will double check if all are cleared, then it call extra STOP
to power off the whole SystemModule.
if OS already have seperated handler for those type objects (CPU, MEM,
PCI), we may not need to change to much to os.
Thanks
Yinghai
On 2012-8-5 4:14, Yinghai Lu wrote:
> On Sat, Jul 28, 2012 at 4:42 AM, Jiang Liu <[email protected]> wrote:
>> The first is an ACPI hotplug slot enumerator, which enumerates ACPI hotplug
>> slots on load and provides callbacks to manage those hotplug slots.
>> An ACPI hotplug slot is an abstraction of receptacles, where a group of
>> system devices could be connected to. This patch implements the skeleton for
>> ACPI system device hotplug slot enumerator. On loading, the driver scans the
>> whole ACPI namespace for hotplug slots and creates a device node for each
>> hotplug slots. Every slot is associated with a device class named
>> acpihp_slot_class and will be managed by ACPI hotplug drivers.
>
> I was thinking:
> We can have module in ACPI DSDT, and every module is coresponding
> to SystemModule.
> so it will be
> \_SB.NOD1
> CPU0
> CPU1
> CPU2
> CPU3
> MEM0
> MEM1
> MEM2
> MEM3
> PCI0
> PCI1
> PCI2
> PCI3
> NTFY
> STAT
> STOP
> NTFY will be something like:
> Notify(\_SB.NOD1.CPU0,....)
> Notify(\_SB.NOD1.CPU1,....)
> Notify(\_SB.NOD1.CPU2,....)
> Notify(\_SB.NOD1.CPU3,....)
>
> Notify(\_SB.NOD1.MEM0,....)
> Notify(\_SB.NOD1.MEM1,....)
> Notify(\_SB.NOD1.MEM2,....)
> Notify(\_SB.NOD1.MEM3,....)
>
> Notify(\_SB.NOD1.PCI0,....)
> Notify(\_SB.NOD1.PCI1,....)
> Notify(\_SB.NOD1.PCI2,....)
> Notify(\_SB.NOD1.PCI3,....)
>
> and will link GPE button for SystemModule to call NTFY.
>
> STAT could be 32bit integer for final turn off the power.
> every CPU, MEM, PCI will own one bit, it will clear that bit in this own
> _EJ0.
> Every _EJ0 will double check if all are cleared, then it call extra STOP
> to power off the whole SystemModule.
>
> if OS already have seperated handler for those type objects (CPU, MEM,
> PCI), we may not need to change to much to os.
Hi Yinghai,
Thanks for your comments.
It's one of the major concerns that we may need to make too many changes
to existing code, and even break backward compatibilities:(
There are two possible ways to support hotplug in ACPI BIOS:
1) send hotplug notifications to each sub-component of an FRU/module.
2) send hotplug notifications to the FRU itself.
We have had discussions with BIOS team and chose to adopt the second
solution because:
1) It's more convenient for user to operate on FRUs instead of sub-components.
2) BIOS will be simpler because it only need to track status of FRU itself
instead of sub-components.
3) It will be much more complex to do error recover if OS/BIOS cooperate on
sub-component granularity.
Any suggestions here?
Regards!
Gerry