From: Peter Senna Tschudin <[email protected]>
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <[email protected]>
---
drivers/net/can/sja1000/peak_pcmcia.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index ec6bd9d..272a85f 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -686,8 +686,10 @@ static int __devinit pcan_probe(struct pcmcia_device *pdev)
/* detect available channels */
pcan_add_channels(card);
- if (!card->chan_count)
+ if (!card->chan_count) {
+ err = -ENOMEM;
goto probe_err_4;
+ }
/* init the timer which controls the leds */
init_timer(&card->led_timer);
On 10/03/2012 06:17 PM, Peter Senna Tschudin wrote:
> From: Peter Senna Tschudin <[email protected]>
>
> Convert a nonnegative error return code to a negative one, as returned
> elsewhere in the function.
>
> A simplified version of the semantic match that finds this problem is as
> follows: (http://coccinelle.lip6.fr/)
>
> // <smpl>
> (
> if@p1 (\(ret < 0\|ret != 0\))
> { ... return ret; }
> |
> ret@p1 = 0
> )
> ... when != ret = e1
> when != &ret
> *if(...)
> {
> ... when != ret = e2
> when forall
> return ret;
> }
> // </smpl>
>
> Signed-off-by: Peter Senna Tschudin <[email protected]>
Applied to can.
tnx, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |