From: Peter Senna Tschudin <[email protected]>
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <[email protected]>
---
drivers/net/can/sja1000/peak_pci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index f0a1296..f5b82ae 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -583,12 +583,14 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev,
cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
if (!cfg_base) {
dev_err(&pdev->dev, "failed to map PCI resource #0\n");
+ err = -ENOMEM;
goto failure_release_regions;
}
reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
if (!reg_base) {
dev_err(&pdev->dev, "failed to map PCI resource #1\n");
+ err = -ENOMEM;
goto failure_unmap_cfg_base;
}
On 10/03/2012 06:17 PM, Peter Senna Tschudin wrote:
> From: Peter Senna Tschudin <[email protected]>
>
> Convert a nonnegative error return code to a negative one, as returned
> elsewhere in the function.
>
> A simplified version of the semantic match that finds this problem is as
> follows: (http://coccinelle.lip6.fr/)
>
> // <smpl>
> (
> if@p1 (\(ret < 0\|ret != 0\))
> { ... return ret; }
> |
> ret@p1 = 0
> )
> ... when != ret = e1
> when != &ret
> *if(...)
> {
> ... when != ret = e2
> when forall
> return ret;
> }
> // </smpl>
>
> Signed-off-by: Peter Senna Tschudin <[email protected]>
Applied to can.
Tnx, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |