On 10/25/2012 08:30 AM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <[email protected]>
>
> This patch adds device tree support for
> battery-temperature-monitor driver
>
> Signed-off-by: Rajanikanth H.V <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/ab8500.txt | 6 ++
> .../bindings/power_supply/ab8500/btemp.txt | 16 +++++
> arch/arm/boot/dts/dbx5x0.dtsi | 5 ++
> drivers/mfd/ab8500-core.c | 5 ++
> drivers/power/Kconfig | 6 --
> drivers/power/ab8500_bmdata.c | 4 +-
> drivers/power/ab8500_btemp.c | 66 ++++++++++++--------
> 7 files changed, 73 insertions(+), 35 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
> index 6ca8d81..179c802 100644
> --- a/Documentation/devicetree/bindings/mfd/ab8500.txt
> +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
> @@ -30,6 +30,12 @@ ab8500-fg : : vddadc : Fuel Gauge
> : LOW_BAT_F : : LOW threshold battery voltage
> : CC_INT_CALIB : : Coulomb Counter Internal Calibration
> : CCEOC : : Coulomb Counter End of Conversion
> +ab8500-btemp : : vtvout : Battery Temperature
> + : BAT_CTRL_INDB : : Battery Removal Indicator
> + : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
> + : BTEMP_HIGH : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
> + : BTEMP_LOW_MEDIUM : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
> + : BTEMP_MEDIUM_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp”
BTEMP_HIGH, BTEMP_LOW_MEDIUM and BTEMP_MEDIUM_HIGH are in the wrong
order and don't correspond to their description.
--
Francesco