After installing linux on macbook 9.2 (mid 2012), I have next errors
in dmesg log:
[ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=600
[ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=0
[ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=1800
[ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=0
[ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
action 0xe frozen
[ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
[ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
[ 1407.496035] sr 1:0:0:0: CDB:
[ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
pio 16392 in
[ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
0x10 (ATA bus error)
[ 1407.501987] ata2.00: status: { DRDY }
[ 1407.502882] ata2: hard resetting link
[ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 1408.239084] ata2.00: configured for UDMA/100
[ 1408.262238] ata2: EH complete
[ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=1800
[ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
errors=remount-ro,data=ordered,commit=0
[ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
action 0xe frozen
[ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
[ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
[ 3577.927544] sr 1:0:0:0: CDB:
[ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
[ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
pio 16392 in
[ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
0x10 (ATA bus error)
[ 3577.932954] ata2.00: status: { DRDY }
[ 3577.934264] ata2: hard resetting link
[ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 3578.670969] ata2.00: configured for UDMA/100
[ 3578.694145] ata2: EH complete
Is it linux driver, or maybe
$ lspci # sata information only
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device 7270
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
I/O ports at 2098 [size=8]
I/O ports at 20bc [size=4]
I/O ports at 2090 [size=8]
I/O ports at 20b8 [size=4]
I/O ports at 2060 [size=32]
Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
$ uname -a
Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
12:39:03 UTC 2012 x86_64 GNU/Linux
$ cat /etc/debian_version
wheezy/sid
In OSX there is no errors with hard drive.
What else can I do investigate this situation next?
--
Azat Khuzhin
Anybody?
On Mon, Nov 5, 2012 at 7:28 PM, Azat Khuzhin <[email protected]> wrote:
> After installing linux on macbook 9.2 (mid 2012), I have next errors
> in dmesg log:
>
> [ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
> errors=remount-ro,data=ordered,commit=600
> [ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
> errors=remount-ro,data=ordered,commit=0
> [ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
> errors=remount-ro,data=ordered,commit=1800
> [ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
> errors=remount-ro,data=ordered,commit=0
> [ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
> action 0xe frozen
> [ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
> [ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
> [ 1407.496035] sr 1:0:0:0: CDB:
> [ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
> [ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
> pio 16392 in
> [ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
> 0x10 (ATA bus error)
> [ 1407.501987] ata2.00: status: { DRDY }
> [ 1407.502882] ata2: hard resetting link
> [ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
> filtered out
> [ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
> filtered out
> [ 1408.239084] ata2.00: configured for UDMA/100
> [ 1408.262238] ata2: EH complete
> [ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
> errors=remount-ro,data=ordered,commit=1800
> [ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
> [ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
> errors=remount-ro,data=ordered,commit=0
> [ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
> action 0xe frozen
> [ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
> [ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
> [ 3577.927544] sr 1:0:0:0: CDB:
> [ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
> [ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
> pio 16392 in
> [ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
> 0x10 (ATA bus error)
> [ 3577.932954] ata2.00: status: { DRDY }
> [ 3577.934264] ata2: hard resetting link
> [ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
> filtered out
> [ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
> filtered out
> [ 3578.670969] ata2.00: configured for UDMA/100
> [ 3578.694145] ata2: EH complete
>
> Is it linux driver, or maybe
>
> $ lspci # sata information only
> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
> 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
> Subsystem: Intel Corporation Device 7270
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
> I/O ports at 2098 [size=8]
> I/O ports at 20bc [size=4]
> I/O ports at 2090 [size=8]
> I/O ports at 20b8 [size=4]
> I/O ports at 2060 [size=32]
> Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [70] Power Management version 3
> Capabilities: [a8] SATA HBA v1.0
> Capabilities: [b0] PCI Advanced Features
> Kernel driver in use: ahci
>
> $ uname -a
> Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
> 12:39:03 UTC 2012 x86_64 GNU/Linux
> $ cat /etc/debian_version
> wheezy/sid
>
> In OSX there is no errors with hard drive.
>
> What else can I do investigate this situation next?
>
> --
> Azat Khuzhin
--
Azat Khuzhin
Also I want to note that some times notebook was suspended.
But this errors don't appears every time before suspend or just after resume.
On Wed, Nov 7, 2012 at 7:41 AM, Azat Khuzhin <[email protected]> wrote:
> Anybody?
>
> On Mon, Nov 5, 2012 at 7:28 PM, Azat Khuzhin <[email protected]> wrote:
>> After installing linux on macbook 9.2 (mid 2012), I have next errors
>> in dmesg log:
>>
>> [ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=600
>> [ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=1800
>> [ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>> action 0xe frozen
>> [ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
>> [ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
>> [ 1407.496035] sr 1:0:0:0: CDB:
>> [ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
>> [ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>> pio 16392 in
>> [ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>> 0x10 (ATA bus error)
>> [ 1407.501987] ata2.00: status: { DRDY }
>> [ 1407.502882] ata2: hard resetting link
>> [ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 1408.239084] ata2.00: configured for UDMA/100
>> [ 1408.262238] ata2: EH complete
>> [ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=1800
>> [ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>> action 0xe frozen
>> [ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
>> [ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
>> [ 3577.927544] sr 1:0:0:0: CDB:
>> [ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
>> [ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>> pio 16392 in
>> [ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>> 0x10 (ATA bus error)
>> [ 3577.932954] ata2.00: status: { DRDY }
>> [ 3577.934264] ata2: hard resetting link
>> [ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 3578.670969] ata2.00: configured for UDMA/100
>> [ 3578.694145] ata2: EH complete
>>
>> Is it linux driver, or maybe
>>
>> $ lspci # sata information only
>> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
>> 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
>> Subsystem: Intel Corporation Device 7270
>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
>> I/O ports at 2098 [size=8]
>> I/O ports at 20bc [size=4]
>> I/O ports at 2090 [size=8]
>> I/O ports at 20b8 [size=4]
>> I/O ports at 2060 [size=32]
>> Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>> Capabilities: [70] Power Management version 3
>> Capabilities: [a8] SATA HBA v1.0
>> Capabilities: [b0] PCI Advanced Features
>> Kernel driver in use: ahci
>>
>> $ uname -a
>> Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
>> 12:39:03 UTC 2012 x86_64 GNU/Linux
>> $ cat /etc/debian_version
>> wheezy/sid
>>
>> In OSX there is no errors with hard drive.
>>
>> What else can I do investigate this situation next?
>>
>> --
>> Azat Khuzhin
>
>
>
> --
> Azat Khuzhin
--
Azat Khuzhin
On 11/06/2012 09:41 PM, Azat Khuzhin wrote:
> Anybody?
>
> On Mon, Nov 5, 2012 at 7:28 PM, Azat Khuzhin <[email protected]> wrote:
>> After installing linux on macbook 9.2 (mid 2012), I have next errors
>> in dmesg log:
>>
>> [ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=600
>> [ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=1800
>> [ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>> action 0xe frozen
>> [ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
>> [ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
>> [ 1407.496035] sr 1:0:0:0: CDB:
>> [ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
>> [ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>> pio 16392 in
>> [ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>> 0x10 (ATA bus error)
>> [ 1407.501987] ata2.00: status: { DRDY }
>> [ 1407.502882] ata2: hard resetting link
>> [ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 1408.239084] ata2.00: configured for UDMA/100
>> [ 1408.262238] ata2: EH complete
Is this after a resume? It could be that for some reason the SATA link
is a little bit unstable right after the machine powers up again. There
may not be much the kernel can do about this..
>> [ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=1800
>> [ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
>> one hw-PMU counter.
>> [ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>> [ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
>> errors=remount-ro,data=ordered,commit=0
>> [ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>> action 0xe frozen
>> [ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
>> [ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
>> [ 3577.927544] sr 1:0:0:0: CDB:
>> [ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08 00
>> [ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>> pio 16392 in
>> [ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>> 0x10 (ATA bus error)
>> [ 3577.932954] ata2.00: status: { DRDY }
>> [ 3577.934264] ata2: hard resetting link
>> [ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>> filtered out
>> [ 3578.670969] ata2.00: configured for UDMA/100
>> [ 3578.694145] ata2: EH complete
>>
>> Is it linux driver, or maybe
>>
>> $ lspci # sata information only
>> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
>> 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
>> Subsystem: Intel Corporation Device 7270
>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
>> I/O ports at 2098 [size=8]
>> I/O ports at 20bc [size=4]
>> I/O ports at 2090 [size=8]
>> I/O ports at 20b8 [size=4]
>> I/O ports at 2060 [size=32]
>> Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>> Capabilities: [70] Power Management version 3
>> Capabilities: [a8] SATA HBA v1.0
>> Capabilities: [b0] PCI Advanced Features
>> Kernel driver in use: ahci
>>
>> $ uname -a
>> Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
>> 12:39:03 UTC 2012 x86_64 GNU/Linux
>> $ cat /etc/debian_version
>> wheezy/sid
>>
>> In OSX there is no errors with hard drive.
>>
>> What else can I do investigate this situation next?
>>
>> --
>> Azat Khuzhin
>
>
>
Yeah, I'm guessed about this.
Thanks for reply.
On Fri, Nov 9, 2012 at 7:48 AM, Robert Hancock <[email protected]> wrote:
> On 11/06/2012 09:41 PM, Azat Khuzhin wrote:
>>
>> Anybody?
>>
>> On Mon, Nov 5, 2012 at 7:28 PM, Azat Khuzhin <[email protected]>
>> wrote:
>>>
>>> After installing linux on macbook 9.2 (mid 2012), I have next errors
>>> in dmesg log:
>>>
>>> [ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
>>> errors=remount-ro,data=ordered,commit=600
>>> [ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
>>> one hw-PMU counter.
>>> [ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>>> [ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
>>> errors=remount-ro,data=ordered,commit=0
>>> [ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
>>> errors=remount-ro,data=ordered,commit=1800
>>> [ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
>>> one hw-PMU counter.
>>> [ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>>> [ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
>>> errors=remount-ro,data=ordered,commit=0
>>> [ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>>> action 0xe frozen
>>> [ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
>>> [ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
>>> [ 1407.496035] sr 1:0:0:0: CDB:
>>> [ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08
>>> 00
>>> [ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>>> pio 16392 in
>>> [ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>>> 0x10 (ATA bus error)
>>> [ 1407.501987] ata2.00: status: { DRDY }
>>> [ 1407.502882] ata2: hard resetting link
>>> [ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>> [ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>> filtered out
>>> [ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>> filtered out
>>> [ 1408.239084] ata2.00: configured for UDMA/100
>>> [ 1408.262238] ata2: EH complete
>
>
> Is this after a resume? It could be that for some reason the SATA link is a
> little bit unstable right after the machine powers up again. There may not
> be much the kernel can do about this..
>
>
>>> [ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
>>> errors=remount-ro,data=ordered,commit=1800
>>> [ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
>>> one hw-PMU counter.
>>> [ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>>> [ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
>>> errors=remount-ro,data=ordered,commit=0
>>> [ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>>> action 0xe frozen
>>> [ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
>>> [ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
>>> [ 3577.927544] sr 1:0:0:0: CDB:
>>> [ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08
>>> 00
>>> [ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>>> pio 16392 in
>>> [ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>>> 0x10 (ATA bus error)
>>> [ 3577.932954] ata2.00: status: { DRDY }
>>> [ 3577.934264] ata2: hard resetting link
>>> [ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>> [ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>> filtered out
>>> [ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>> filtered out
>>> [ 3578.670969] ata2.00: configured for UDMA/100
>>> [ 3578.694145] ata2: EH complete
>>>
>>> Is it linux driver, or maybe
>>>
>>> $ lspci # sata information only
>>> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
>>> 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
>>> Subsystem: Intel Corporation Device 7270
>>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
>>> I/O ports at 2098 [size=8]
>>> I/O ports at 20bc [size=4]
>>> I/O ports at 2090 [size=8]
>>> I/O ports at 20b8 [size=4]
>>> I/O ports at 2060 [size=32]
>>> Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
>>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>> Capabilities: [70] Power Management version 3
>>> Capabilities: [a8] SATA HBA v1.0
>>> Capabilities: [b0] PCI Advanced Features
>>> Kernel driver in use: ahci
>>>
>>> $ uname -a
>>> Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
>>> 12:39:03 UTC 2012 x86_64 GNU/Linux
>>> $ cat /etc/debian_version
>>> wheezy/sid
>>>
>>> In OSX there is no errors with hard drive.
>>>
>>> What else can I do investigate this situation next?
>>>
>>> --
>>> Azat Khuzhin
>>
>>
>>
>>
>
--
Azat Khuzhin
Also I have notice next thing:
At 04:21 I close lid, and laptop automatically suspend, with the
following messages in the log:
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.114021] ata2.00:
exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.116459] ata2.00:
irq_stat 0x00400000, PHY RDY changed
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.117665] ata2: SError: {
PHYRdyChg CommWake }
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.118854] sr 1:0:0:0: CDB:
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.120061] Get event status
notification: 4a 01 00 00 10 00 00 00 08 00
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.121275] ata2.00: cmd
a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.121275] res
50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.126075] ata2.00: status: { DRDY }
Nov 11 04:21:49 macbook-pro-sq kernel: [19489.127304] ata2: hard resetting link
But when I try to resume, it not turn on normally, the monitor don't bright.
Laptop came out of suspend, I detected this by indicator at the front.
I think that because of it can't read from HDD.
Am I right? What can I do next to investigate further?
On Sat, Nov 10, 2012 at 5:22 PM, Azat Khuzhin <[email protected]> wrote:
> Yeah, I'm guessed about this.
> Thanks for reply.
>
> On Fri, Nov 9, 2012 at 7:48 AM, Robert Hancock <[email protected]> wrote:
>> On 11/06/2012 09:41 PM, Azat Khuzhin wrote:
>>>
>>> Anybody?
>>>
>>> On Mon, Nov 5, 2012 at 7:28 PM, Azat Khuzhin <[email protected]>
>>> wrote:
>>>>
>>>> After installing linux on macbook 9.2 (mid 2012), I have next errors
>>>> in dmesg log:
>>>>
>>>> [ 389.623828] EXT4-fs (sda4): re-mounted. Opts:
>>>> errors=remount-ro,data=ordered,commit=600
>>>> [ 410.038465] NMI watchdog: enabled on all CPUs, permanently consumes
>>>> one hw-PMU counter.
>>>> [ 410.075042] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>>>> [ 410.483526] EXT4-fs (sda4): re-mounted. Opts:
>>>> errors=remount-ro,data=ordered,commit=0
>>>> [ 1401.834509] EXT4-fs (sda4): re-mounted. Opts:
>>>> errors=remount-ro,data=ordered,commit=1800
>>>> [ 1406.467268] NMI watchdog: enabled on all CPUs, permanently consumes
>>>> one hw-PMU counter.
>>>> [ 1406.506769] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>>>> [ 1406.590122] EXT4-fs (sda4): re-mounted. Opts:
>>>> errors=remount-ro,data=ordered,commit=0
>>>> [ 1407.492260] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>>>> action 0xe frozen
>>>> [ 1407.494441] ata2.00: irq_stat 0x00400000, PHY RDY changed
>>>> [ 1407.495238] ata2: SError: { PHYRdyChg CommWake }
>>>> [ 1407.496035] sr 1:0:0:0: CDB:
>>>> [ 1407.497333] Get event status notification: 4a 01 00 00 10 00 00 00 08
>>>> 00
>>>> [ 1407.498285] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>>>> pio 16392 in
>>>> [ 1407.498285] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>>>> 0x10 (ATA bus error)
>>>> [ 1407.501987] ata2.00: status: { DRDY }
>>>> [ 1407.502882] ata2: hard resetting link
>>>> [ 1408.230302] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>> [ 1408.233279] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>>> filtered out
>>>> [ 1408.237467] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>>> filtered out
>>>> [ 1408.239084] ata2.00: configured for UDMA/100
>>>> [ 1408.262238] ata2: EH complete
>>
>>
>> Is this after a resume? It could be that for some reason the SATA link is a
>> little bit unstable right after the machine powers up again. There may not
>> be much the kernel can do about this..
>>
>>
>>>> [ 3565.785609] EXT4-fs (sda4): re-mounted. Opts:
>>>> errors=remount-ro,data=ordered,commit=1800
>>>> [ 3576.921499] NMI watchdog: enabled on all CPUs, permanently consumes
>>>> one hw-PMU counter.
>>>> [ 3576.958624] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>>>> [ 3577.114612] EXT4-fs (sda4): re-mounted. Opts:
>>>> errors=remount-ro,data=ordered,commit=0
>>>> [ 3577.923688] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000
>>>> action 0xe frozen
>>>> [ 3577.925852] ata2.00: irq_stat 0x00400000, PHY RDY changed
>>>> [ 3577.926746] ata2: SError: { PHYRdyChg CommWake }
>>>> [ 3577.927544] sr 1:0:0:0: CDB:
>>>> [ 3577.928345] Get event status notification: 4a 01 00 00 10 00 00 00 08
>>>> 00
>>>> [ 3577.929642] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0
>>>> pio 16392 in
>>>> [ 3577.929642] res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask
>>>> 0x10 (ATA bus error)
>>>> [ 3577.932954] ata2.00: status: { DRDY }
>>>> [ 3577.934264] ata2: hard resetting link
>>>> [ 3578.662228] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>> [ 3578.665211] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>>> filtered out
>>>> [ 3578.669355] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
>>>> filtered out
>>>> [ 3578.670969] ata2.00: configured for UDMA/100
>>>> [ 3578.694145] ata2: EH complete
>>>>
>>>> Is it linux driver, or maybe
>>>>
>>>> $ lspci # sata information only
>>>> 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
>>>> 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
>>>> Subsystem: Intel Corporation Device 7270
>>>> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
>>>> I/O ports at 2098 [size=8]
>>>> I/O ports at 20bc [size=4]
>>>> I/O ports at 2090 [size=8]
>>>> I/O ports at 20b8 [size=4]
>>>> I/O ports at 2060 [size=32]
>>>> Memory at a0816000 (32-bit, non-prefetchable) [size=2K]
>>>> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>>>> Capabilities: [70] Power Management version 3
>>>> Capabilities: [a8] SATA HBA v1.0
>>>> Capabilities: [b0] PCI Advanced Features
>>>> Kernel driver in use: ahci
>>>>
>>>> $ uname -a
>>>> Linux macbook-pro 3.6.5macbook-pro-custom-v0.1 #4 SMP Sun Nov 4
>>>> 12:39:03 UTC 2012 x86_64 GNU/Linux
>>>> $ cat /etc/debian_version
>>>> wheezy/sid
>>>>
>>>> In OSX there is no errors with hard drive.
>>>>
>>>> What else can I do investigate this situation next?
>>>>
>>>> --
>>>> Azat Khuzhin
>>>
>>>
>>>
>>>
>>
>
>
>
> --
> Azat Khuzhin
--
Azat Khuzhin