This second version of this patch series splits the patches up into more
logical chunks as requested by Stephen. Instead of renaming the matching
parameters in the clock driver, this version renames the AUXDATA entries
to match what the clock driver expects. Furthermore the host1x clock is
initialized to 150 MHz instead of the unsupported 144 MHz.
Thierry
Thierry Reding (6):
ARM: tegra: Add Tegra20 host1x support
ARM: tegra: Add AUXDATA for Tegra20 host1x
ARM: tegra: Add Tegra20 host1x clock support
ARM: tegra: Add Tegra30 host1x support
ARM: tegra: Add AUXDATA for Tegra30 host1x
ARM: tegra: Add Tegra30 host1x clock support
arch/arm/boot/dts/tegra20.dtsi | 87 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/tegra30.dtsi | 87 +++++++++++++++++++++++++++++++
arch/arm/mach-tegra/board-dt-tegra20.c | 9 ++++
arch/arm/mach-tegra/board-dt-tegra30.c | 9 ++++
arch/arm/mach-tegra/tegra20_clocks_data.c | 11 ++--
arch/arm/mach-tegra/tegra30_clocks_data.c | 5 +-
6 files changed, 203 insertions(+), 5 deletions(-)
--
1.8.0
Add the OF_DEV_AUXDATA table entries required to associate the proper
names with host1x and its children. In turn, this allows the devices to
find the required clocks.
Signed-off-by: Thierry Reding <[email protected]>
---
arch/arm/mach-tegra/board-dt-tegra30.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index cd30338..6497d12 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -57,6 +57,12 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-host1x", 0x50000000, "host1x", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54200000, "tegradc.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54240000, "tegradc.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-hdmi", 0x54280000, "hdmi", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-dsi", 0x54300000, "dsi", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-tvo", 0x542c0000, "tvo", NULL),
{}
};
@@ -82,6 +88,9 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
{ "sbc4", "pll_p", 100000000, false},
{ "sbc5", "pll_p", 100000000, false},
{ "sbc6", "pll_p", 100000000, false},
+ { "host1x", "pll_c", 150000000, false},
+ { "disp1", "pll_p", 600000000, false},
+ { "disp2", "pll_p", 600000000, false},
{ NULL, NULL, 0, 0},
};
--
1.8.0
Extend the pll_d frequency table with a few entries to support common
HDMI and LVDS display modes and setup the clock parents for the two
display controllers and HDMI.
Signed-off-by: Thierry Reding <[email protected]>
---
arch/arm/mach-tegra/tegra20_clocks_data.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
index 9615ee3..a23a073 100644
--- a/arch/arm/mach-tegra/tegra20_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -246,11 +246,16 @@ static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
{ 19200000, 216000000, 135, 12, 1, 3},
{ 26000000, 216000000, 216, 26, 1, 4},
+ { 12000000, 297000000, 99, 4, 1, 4 },
+ { 12000000, 339000000, 113, 4, 1, 4 },
+
{ 12000000, 594000000, 594, 12, 1, 8},
{ 13000000, 594000000, 594, 13, 1, 8},
{ 19200000, 594000000, 495, 16, 1, 8},
{ 26000000, 594000000, 594, 26, 1, 8},
+ { 12000000, 616000000, 616, 12, 1, 8},
+
{ 12000000, 1000000000, 1000, 12, 1, 12},
{ 13000000, 1000000000, 1000, 13, 1, 12},
{ 19200000, 1000000000, 625, 12, 1, 8},
@@ -1036,9 +1041,6 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("usbd", "utmip-pad", NULL),
CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
CLK_DUPLICATE("usbd", "tegra-otg", NULL),
- CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
- CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
- CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
CLK_DUPLICATE("epp", "tegra_grhost", "epp"),
@@ -1051,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
+ CLK_DUPLICATE("pll_p", "tegradc.0", "parent"),
+ CLK_DUPLICATE("pll_p", "tegradc.1", "parent"),
+ CLK_DUPLICATE("pll_d_out0", "hdmi", "parent"),
};
#define CLK(dev, con, ck) \
--
1.8.0
Add the host1x node along with its children to the Tegra30 DTSI. Board-
specific DTS files are expected to enable the available outputs and
complement the device tree with data specific to the hardware.
Signed-off-by: Thierry Reding <[email protected]>
---
arch/arm/boot/dts/tegra30.dtsi | 87 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index b8e33c3..529fdb8 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,93 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ host1x {
+ compatible = "nvidia,tegra30-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe {
+ compatible = "nvidia,tegra30-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ };
+
+ vi {
+ compatible = "nvidia,tegra30-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ };
+
+ epp {
+ compatible = "nvidia,tegra30-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ };
+
+ isp {
+ compatible = "nvidia,tegra30-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ };
+
+ gr2d {
+ compatible = "nvidia,tegra30-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ };
+
+ gr3d {
+ compatible = "nvidia,tegra30-gr3d";
+ reg = <0x54180000 0x00040000>;
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra30-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra30-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi {
+ compatible = "nvidia,tegra30-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra30-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra30-dsi";
+ reg = <0x54300000 0x00040000>;
+ status = "disabled";
+ };
+ };
+
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
--
1.8.0
Add the host1x node along with its children to the Tegra20 DTSI. Board-
specific DTS files are expected to enable the available outputs and
complement the device tree with data specific to the hardware.
Signed-off-by: Thierry Reding <[email protected]>
---
arch/arm/boot/dts/tegra20.dtsi | 87 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 4519a6f..b8effa1 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,93 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ host1x {
+ compatible = "nvidia,tegra20-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe {
+ compatible = "nvidia,tegra20-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ };
+
+ vi {
+ compatible = "nvidia,tegra20-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ };
+
+ epp {
+ compatible = "nvidia,tegra20-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ };
+
+ isp {
+ compatible = "nvidia,tegra20-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ };
+
+ gr2d {
+ compatible = "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ };
+
+ gr3d {
+ compatible = "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi {
+ compatible = "nvidia,tegra20-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra20-dsi";
+ reg = <0x54300000 0x00040000>;
+ status = "disabled";
+ };
+ };
+
timer@50004600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
--
1.8.0
Setup the clock parents for the two display controllers and HDMI.
Signed-off-by: Thierry Reding <[email protected]>
---
arch/arm/mach-tegra/tegra30_clocks_data.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index 7bc8b1d..6942c7a 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1298,8 +1298,6 @@ struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("usbd", "utmip-pad", NULL),
CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
CLK_DUPLICATE("usbd", "tegra-otg", NULL),
- CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
- CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
@@ -1337,6 +1335,9 @@ struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"),
+ CLK_DUPLICATE("pll_p", "tegradc.0", "parent"),
+ CLK_DUPLICATE("pll_p", "tegradc.1", "parent"),
+ CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"),
};
struct clk *tegra_ptr_clks[] = {
--
1.8.0
Add the OF_DEV_AUXDATA table entries required to associate the proper
names with host1x and its children. In turn, this allows the devices to
find the required clocks.
Signed-off-by: Thierry Reding <[email protected]>
---
arch/arm/mach-tegra/board-dt-tegra20.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 1198e84..734d9cc 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -94,6 +94,12 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "host1x", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegradc.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegradc.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "hdmi", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "dsi", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tvo", NULL),
{}
};
@@ -118,6 +124,9 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
{ "sbc2", "pll_p", 100000000, false },
{ "sbc3", "pll_p", 100000000, false },
{ "sbc4", "pll_p", 100000000, false },
+ { "host1x", "pll_c", 150000000, false },
+ { "disp1", "pll_p", 600000000, false },
+ { "disp2", "pll_p", 600000000, false },
{ NULL, NULL, 0, 0},
};
--
1.8.0
On 11/15/2012 02:07 PM, Thierry Reding wrote:
> This second version of this patch series splits the patches up into more
> logical chunks as requested by Stephen. Instead of renaming the matching
> parameters in the clock driver, this version renames the AUXDATA entries
> to match what the clock driver expects. Furthermore the host1x clock is
> initialized to 150 MHz instead of the unsupported 144 MHz.
Thanks very much. I have applied the series; DT changes to for-3.8/dt,
and the other changes to for-3.8/soc.
Hi Thierry,
Thank you for your hard work.
The series,
Acked-by: Mark Zhang <[email protected]>
Reviewed-by: Mark Zhang <[email protected]>
Tested-by: Mark Zhang <[email protected]>
On Ventana, LVDS and HDMI worked.
PS: Alex's power sequence patch is needed to enable panel and backlight.
Also we need to define dc and hdmi nodes in tegra20-ventana.dts.
We may publish the patches for different boards next.
Mark
On 11/16/2012 05:07 AM, Thierry Reding wrote:
> This second version of this patch series splits the patches up into more
> logical chunks as requested by Stephen. Instead of renaming the matching
> parameters in the clock driver, this version renames the AUXDATA entries
> to match what the clock driver expects. Furthermore the host1x clock is
> initialized to 150 MHz instead of the unsupported 144 MHz.
>
> Thierry
>
> Thierry Reding (6):
> ARM: tegra: Add Tegra20 host1x support
> ARM: tegra: Add AUXDATA for Tegra20 host1x
> ARM: tegra: Add Tegra20 host1x clock support
> ARM: tegra: Add Tegra30 host1x support
> ARM: tegra: Add AUXDATA for Tegra30 host1x
> ARM: tegra: Add Tegra30 host1x clock support
>
> arch/arm/boot/dts/tegra20.dtsi | 87 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/tegra30.dtsi | 87 +++++++++++++++++++++++++++++++
> arch/arm/mach-tegra/board-dt-tegra20.c | 9 ++++
> arch/arm/mach-tegra/board-dt-tegra30.c | 9 ++++
> arch/arm/mach-tegra/tegra20_clocks_data.c | 11 ++--
> arch/arm/mach-tegra/tegra30_clocks_data.c | 5 +-
> 6 files changed, 203 insertions(+), 5 deletions(-)
>
On Friday 16 November 2012 05:07:53 Thierry Reding wrote:
> This second version of this patch series splits the patches up into more
> logical chunks as requested by Stephen. Instead of renaming the matching
> parameters in the clock driver, this version renames the AUXDATA entries
> to match what the clock driver expects. Furthermore the host1x clock is
> initialized to 150 MHz instead of the unsupported 144 MHz.
Tested-and-acked-by: Alexandre Courbot <[email protected]>