> > > I got this issue, if I remember correctly, I fixed it by enabling
> > > CONFIG_ARM_AMBA and CONFIG_AMBA_PL08X. It improved things a bit,
>
> I still see the list_add corruption trace with CONFIG_ARM_AMBA and
> CONFIG_AMBA_PL08X set:
>
[...]
> I also see this panic:
>
> [ 3.558296] jh7110-crypto 16000000.crypto: will run requests pump with
> realtime priority
> [ 3.565961] dwmmc_starfive 16020000.mmc: Version ID is 290a
> [ 3.566016] dwmmc_starfive 16020000.mmc: DW MMC controller at irq
> 70,32 bit host data width,32 deep fifo
> [ 3.574329] cfg80211: Loading compiled-in X.509 certificates for regulatory
> database
> [ 3.577585] mmc_host mmc1: card is polling.
> [ 3.606327] Unable to handle kernel paging request at virtual address
> ffffffff800fab24
> [ 3.820748] Oops [#1]
> [ 3.823027] Modules linked in:
> [ 3.826090] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
> 6.5.0zeha3-00072-g385eddf4e78f #6
> [ 3.832229] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req
> 400000Hz, actual 399193HZ div = 62)
> [ 3.835566] Hardware name: StarFive VisionFive 2 v1.2A (DT)
> [ 3.850595] epc : starfive_rsa_enc_core+0x30/0x116
> [ 3.855402] ra : starfive_rsa_enc+0x5e/0xbc
> [ 3.859679] epc : ffffffff8086937a ra : ffffffff808694be sp : ffffffc800023910
> [ 3.866898] gp : ffffffff81723980 tp : ffffffd8c0150000 t0 :
> ffffffd8c22380c8
> [ 3.874117] t1 : 0000000000000000 t2 : 472f9351d07df710 s0 :
> ffffffc800023960
> [ 3.881335] s1 : ffffffd8c013ea80 a0 : ffffffd8c013ea80 a1 :
> 0000000000000001
> [ 3.888553] a2 : 0000010000000000 a3 : ffffffd8c0133c40 a4 :
> 0000000000000002
> [ 3.895770] a5 : ffffffff800fab24 a6 : ffffffd8ff1d6d90 a7 :
> 0000000000000000
> [ 3.902988] s2 : ffffffd8c013ea40 s3 : ffffffd8c2238180 s4 :
> 0000000000000001
> [ 3.910206] s5 : ffffffd8c22380b0 s6 : ffffffd8c0133c40 s7 :
> 00000000000002a8
> [ 3.917425] s8 : ffffffff8114c240 s9 : 000000001f030000 s10:
> 0000000000000001
> [ 3.924642] s11: ffffffd8c0048300 t3 : 0a1255840a4b7df8 t4 :
> 28fc2f2b1f3b4e7d
> [ 3.931861] t5 : e2bb8080e13469b3 t6 : ffffffd8c2238440
> [ 3.937170] status: 0000000200000120 badaddr: ffffffff800fab24 cause:
> 000000000000000f
> [ 3.945083] [<ffffffff8086937a>] starfive_rsa_enc_core+0x30/0x116
> [ 3.951183] [<ffffffff808694be>] starfive_rsa_enc+0x5e/0xbc
> [ 3.956762] [<ffffffff8045edc4>] pkcs1pad_verify+0xb2/0xea
> [ 3.962256] [<ffffffff8045e21a>] crypto_sig_verify+0xa2/0xd0
> [ 3.967919] [<ffffffff8047e8c0>] public_key_verify_signature+0x168/0x1d2
> [ 3.974625] [<ffffffff80480018>] x509_check_for_self_signed+0x58/0xa0
> [ 3.981071] [<ffffffff8047f486>] x509_cert_parse+0x148/0x19e
> [ 3.986735] [<ffffffff8047fd08>] x509_key_preparse+0x20/0x18c
> [ 3.992485] [<ffffffff8047d8b4>] asymmetric_key_preparse+0x52/0x86
> [ 3.998668] [<ffffffff8044fcb8>] __key_create_or_update+0x16c/0x372
> [ 4.004941] [<ffffffff8044fecc>] key_create_or_update+0xe/0x16
> [ 4.010780] [<ffffffff8047fc78>] x509_load_certificate_list+0x86/0xf6
> [ 4.017226] [<ffffffff80c3a59a>] regulatory_init_db+0x92/0x124
> [ 4.023068] [<ffffffff800020f0>] do_one_initcall+0x38/0x17c
> [ 4.028646] [<ffffffff80c00f1c>] kernel_init_freeable+0x1a2/0x204
> [ 4.034749] [<ffffffff80bb4b56>] kernel_init+0x1e/0x10a
> [ 4.039979] [<ffffffff8000336a>] ret_from_fork+0xa/0x1c
> [ 4.045218] Code: 0205 84aa 8a2e 000f 0140 3783 030b 4709 8793 4007
> (c398) 2783
> [ 4.052715] ---[ end trace 0000000000000000 ]---
> [ 4.057339] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [ 4.064990] SMP: stopping secondary CPUs
> [ 4.068927] ---[ end Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b ]---
>
> Maybe this can also be investigated.
Is there a guide/wiki to compile a fedora-riscv image for VF2 board?
I'll will try reproducing and fix these issues on my side.
Thanks
Jia Jie