After git merge ab7826595e9ec51a51f622c5fc91e2f59440481a
(Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6)
the nouveau driver ends up shutting of the machine when booting.
I hadn't done a git bisection yet and was wondering if there are some
juice commits I ought to look at?
Here is the serial console:
????????PXELINUX 3.82 2009-06-09 Copyright (C) 1994-2009 H. Peter Anvin et al
Loading latest/vmlinuz........................................................................
Loading latest/initramfs.cpio.gz..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ready.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0upstream-10478-g31c7742-dirty ([email protected]) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Sun Mar 3 18:09:03 EST 2013
[ 0.000000] Command line: initrd=latest/initramfs.cpio.gz zcache nofb debug selinux=0 console=ttyS0,115200 loglevel=10 apic=debug BOOT_IMAGE=latest/vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7edffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7ee0000-0x00000000b7ee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7ee3000-0x00000000b7eeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7ef0000-0x00000000b7efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 09/03/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xb7ee0 max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f3a30-0x000f3a3f] mapped at [ffff8800000f3a30]
[ 0.000000] mpc: f1f44-f2088
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] ACPI: RSDP 00000000000f7e60 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 00000000b7ee3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP 00000000b7ee3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
[ 0.000000] ACPI: DSDT 00000000b7ee3100 05B85 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000b7ee0000 00040
[ 0.000000] ACPI: SSDT 00000000b7ee8d80 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000b7ee9680 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG 00000000b7ee96c0 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC 00000000b7ee8cc0 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5f2000 ( fee00000)
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01cbb000, 0x01cbbfff] PGTABLE
[ 0.000000] BRK [0x01cbc000, 0x01cbcfff] PGTABLE
[ 0.000000] BRK [0x01cbd000, 0x01cbdfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb7edffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb7dfffff] page 2M
[ 0.000000] [mem 0xb7e00000-0xb7edffff] page 4k
[ 0.000000] RAMDISK: [mem 0x7ba08000-0x7fffefff]
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffa000-0x13fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b800000-ffff88013effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb7edffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1015422
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10245 pages used for memmap
[ 0.000000] DMA32 zone: 749280 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5f2000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 4, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 4, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 0e, APIC ID 4, APIC INT 0e
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 0f, APIC ID 4, APIC INT 0f
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 4, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 4, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 4, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 4, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 4, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 4, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 4, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 4, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 4, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 4, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 4, APIC INT 0d
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5f1000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b7ee0000 - 00000000b7ee3000
[ 0.000000] PM: Registered nosave memory: 00000000b7ee3000 - 00000000b7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000b7ef0000 - 00000000b7f00000
[ 0.000000] PM: Registered nosave memory: 00000000b7f00000 - 00000000b8000000
[ 0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84928 r8192 d21568 u524288
[ 0.000000] pcpu-alloc: s84928 r8192 d21568 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1001515
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=latest/initramfs.cpio.gz zcache nofb debug selinux=0 console=ttyS0,115200 loglevel=10 apic=debug BOOT_IMAGE=latest/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f000000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ ac000000
[ 0.000000] PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000
[ 0.000000] Memory: 3787248k/5242880k available (6610k kernel code, 1181192k absent, 274440k reserved, 4308k data, 1032k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2913.414 MHz processor
[ 0.000002] Calibrat cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031872] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.039525] Mount-cache hash table entries: 256
[ 0.044214] Initializing cgroup subsys cpuacct
[ 0.048661] Initializing cgroup subsys freezer
[ 0.053122] tseg: 00b7f00000
[ 0.056008] CPU: Physical Processor ID: 0
[ 0.060014] CPU: Processor Core ID: 0
[ 0.063675] mce: CPU supports 6 MCE banks
[ 0.067685] LVT offset 0 assigned for vector 0xf9
[ 0.072384] process: using AMD E400 aware idle routine
[ 0.077515] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.077515] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.077515] tlb_flushall_shift: 4
[ 0.092150] Freeing SMP alternatives: 24k freed
[ 0.098197] ACPI: Core revision 20130117
[ 0.105006] ACPI: All ACPI Tables successfully acquired
[ 0.111854] Getting VERSION: 80050010
[ 0.115519] Getting VERSION: 80050010
[ 0.119179] Getting ID: 0
[ 0.121801] Getting ID: ff000000
[ 0.125020] Getting LVT0: 700
[ 0.127988] Getting LVT1: 400
[ 0.130962] enabled ExtINT on CPU#0
[ 0.134761] ESR value before enabling vector: 0x00000008 after: 0x00000000
[ 0.141707] ENABLING IO-APIC IRQs
[ 0.145022] init IO_APIC IRQs
[ 0.147991] apic 4 pin 0 not connected
[ 0.151830] IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.159743] IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.167645] IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.175547] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.183448] IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.191352] IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.199252] IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.207154] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.215057] IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.222960] IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.231033] IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.239109] IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.247184] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.255260] IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.263333] IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.271408] apic 4 pin 16 not connected
[ 0.275323] apic 4 pin 17 not connected
[ 0.279237] apic 4 pin 18 not connected
[ 0.283147] apic 4 pin 19 not connected
[ 0.287060] apic 4 pin 20 not connected
[ 0.290971] apic 4 pin 21 not connected
[ 0.294884] apic 4 pin 22 not connected
[ 0.298795] apic 4 pin 23 not connected
[ 0.302846] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.318824] smpboot: CPU0: AMD Athlon(tm) II X2 245 Processor (fam: 10, model: 06, stepping: 02)
[ 0.327635] Using local [ 0.436857] ... lapic delta = 1255740
[ 0.440510] ... PM-Timer delta = 357941
[ 0.444336] ... PM-Timer result ok
[ 0.447729] ..... delta 1255740
[ 0.450862] ..... mult: 53933622
[ 0.454081] ..... calibration result: 200918
[ 0.458340] ..... CPU clock speed is 2913.0316 MHz.
[ 0.463205] ..... host bus clock speed is 200.0918 MHz.
[ 0.468428] Performance Events: AMD PMU driver.
[ 0.472978] ... version: 0
[ 0.476976] ... bit width: 48
[ 0.481059] ... generic registers: 4
[ 0.485058] ... value mask: 0000ffffffffffff
[ 0.490354] ... max period: 00007fffffffffff
[ 0.495653] ... fixed-purpose events: 0
[ 0.499651] ... event mask: 000000000000000f
[ 0.505134] MCE: In-kernel MCE decoding enabled.
[ 0.509801] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.517885] smpboot: Booting Node 0, Processors #1[ 0.533763] masked ExtINT on CPU#1
[ 0.539280] Brought up 2 CPUs
[ 0.542432] smpboot: Total of 2 processors activated (11653.65 BogoMIPS)
[ 0.552539] PM: Registering ACPI NVS region [mem 0xb7ee0000-0xb7ee2fff] (12288 bytes)
[ 0.560502] kworker/u:0 (20) used greatest stack depth: 6152 bytes left
[ 0.560542] RTC time: 1:28:43, date: 03/04/13
[ 0.571571] NET: Registered protocol family 16
[ 0.576483] node 0 link 0: io port [8000, ffff]
[ 0.581020] TOM: 00000000c0000000 aka 3072M
[ 0.585205] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
[ 0.590329] node 0 link 0: mmio [a0000, bffff]
[ 0.594775] node 0 link 0: mmio [c0000000, efffffff]
[ 0.599744] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.604713] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000, f03fffff]
[ 0.611861] TOM2: 0000000140000000 aka 5120M
[ 0.616122] bus: [bus 00-04] on node 0 link 0
[ 0.620474] bus: 00 [io 0x0000-0xffff]
[ 0.624300] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.628818] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.633335] bus: 00 [mem 0xf0400000-0xffffffff]
[ 0.637853] bus: 00 [mem 0xf0100000-0xf03fffff]
[ 0.642371] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.647199] ACPI: bus type pci registered
[ 0.651340] dca service started, version 1.12.1
[ 0.655952] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.665240] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.674578] PCI: Using configuration type 1 for base access
[ 0.680761] kworker/u:0 (49) used greatest stack depth: 5720 bytes left
[ 0.693709] bio: create slab <bio-0> at 0
[ 0.697951] ACPI: Added _OSI(Module Device)
[ 0.702299] ACPI: Added _OSI(Processor Device)
[ 0.706739] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.711429] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.717645] ACPI: EC: Look up EC in DSDT
[ 0.725257] ACPI: Interpreter enabled
[ 0.728914] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.739730] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.748958] S3 S4 S5)
[ 0.751370] ACPI: Using IOAPIC for interrupt routing
[ 0.756413] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.775318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.781733] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.787901] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.798110] PCI host bridge to bus 0000:00
[ 0.802205] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.807702] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.813869] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.820030] pci_bus 0000:00: root bus resource [io 0x8000-0xffff]
[ 0.826193] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.832357] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80]
[ 0.838528] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff]
[ 0.845391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.852253] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
[ 0.859108] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff]
[ 0.865986] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.872269] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.878276] pci 0000:00:01.0: reg 18: [io 0x1d00-0x1dff]
[ 0.883782] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.889782] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.895177] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.900568] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.905983] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.911912] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.918058] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.924063] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.930169] pci 0000:00:02.0: supports D1 D2
[ 0.934431] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.941054] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.946807] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.952819] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.958939] pci 0000:00:02.1: supports D1 D2
[ 0.963202] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.969892] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.975678] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.981711] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.987457] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.993464] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
[ 0.999581] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 1.005433] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 1.011158] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 1.017166] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 1.022682] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[ 1.028687] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 1.034775] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
[ 1.040191] pci 0000:00:07.0: supports D1 D2
[ 1.044453] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.051082] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 1.056804] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 1.062804] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 1.068196] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 1.073595] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 1.078981] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 1.084371] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
[ 1.089764] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 1.095941] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 1.101941] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 1.107333] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 1.112726] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 1.118118] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 1.123511] pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f]
[ 1.128901] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 1.135102] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 1.141129] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.147746] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 1.153481] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 1.159505] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.166138] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 1.171856] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 1.177880] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.184503] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 1.190237] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 1.196241] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 1.202323] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.209359] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 1.215964] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.222571] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 1.228691] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 1.234802] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 1.240938] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 1.247138] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 1.253374] pci 0000:01:06.0: [8086:1026] type 00 class 0x020000
[ 1.259402] pci 0000:01:06.0: reg 10: [mem 0xfd8c0000-0xfd8dffff 64bit]
[ 1.266011] pci 0000:01:06.0: reg 18: [mem 0xfd880000-0xfd8bffff 64bit]
[ 1.272610] pci 0000:01:06.0: reg 20: [io 0xbc00-0xbc3f]
[ 1.278010] pci 0000:01:06.0: reg 30: [mem 0x00000000-0x0003ffff pref]
[ 1.284550] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold
[ 1.290743] pci 0000:01:08.0: [10b7:1700] type 00 class 0x020000
[ 1.296750] pci 0000:01:08.0: reg 10: [mem 0xfd8fc000-0xfd8fffff]
[ 1.302835] pci 0000:01:08.0: reg 14: [io 0xb800-0xb8ff]
[ 1.308248] pci 0000:01:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.314788] pci 0000:01:08.0: supports D1 D2
[ 1.319048] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.325737] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 1.332510] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 1.338593] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 1.345369] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 1.352579] pci 0000:00:04.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 1.360480] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 1.368373] pci 0000:00:04.0: bridge window [io 0x8000-0xffff] (subtractive decode)
[ 1.376266] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 1.384165] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80] (subtractive decode)
[ 1.392061] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
[ 1.400648] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.409241] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
[ 1.417828] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
[ 1.426505] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 1.431462] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 1.437544] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.444320] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 1.452138] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 1.457102] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 1.463179] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.469948] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 1.477766] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 1.482734] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 1.488815] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.495584] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.503318] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.510130] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 *7 9 10 11 14 15)
[ 1.516762] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.524551] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[ 1.531188] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.538985] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.546775] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.554565] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.562353] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.570154] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 1.576782] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.584573] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 1.591203] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 1.597834] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 1.604477] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.612268] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 1.618900] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
[ 1.625541] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.633337] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 1.639979] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 1.646667] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 1.652135] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 1.658570] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 1.664029] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 1.670459] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 1.676893] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 1.683321] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 1.689754] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 1.696184] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0
[ 1.702198] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 1.708212] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 1.714229] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
[ 1.721212] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
[ 1.727230] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
[ 1.733243] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 1.739259] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 1.746243] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 1.753229] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
[ 1.758690] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
[ 1.764254] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.769079] acpi root: \_SB_.PCI0 notify handler is installed
[ 1.774852] Found 1 acpi root devices
[ 1.778692] ACPI: No dock devices found.
[ 1.782831] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.790902] vgaarb: loaded
[ 1.793605] vgaarb: bridge control possible 0000:00:0d.0
[ 1.799068] ACPI: bus type usb registered
[ 1.803237] usbcore: registered new interface driver usbfs
[ 1.808790] usbcore: registered new interface driver hub
[ 1.814179] usbcore: registered new device driver usb
[ 1.819388] pps_core: LinuxPPS API ver. 1 registered
[ 1.824345] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.833531] PTP clock support registered
[ 1.837596] PCI: Using ACPI for IRQ routing
[ 1.843202] PCI: pci_cache_line_size set to 64 bytes
[ 1.848170] pci 0000:00:01.0: no compatible bridge window for [io 0x1d00-0x1dff]
[ 1.855666] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 1.861661] e820: reserve RAM buffer [mem 0xb7ee0000-0xb7ffffff]
[ 1.867882] NetLabel: Initializing
[ 1.871284] NetLabel: domain hash size = 128
[ 1.875633] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.880595] NetLabel: unlabeled traffic allowed by default
[ 1.886319] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.893368] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 1.898401] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.906342] Switching to clocksource hpet
[ 1.912241] pnp: PnP ACPI init
[ 1.915320] ACPI: bus type pnp registered
[ 1.919586] system 00:00: [io 0x1000-0x107f] has been reserved
[ 1.925495] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 1.931404] system 00:00: [io 0x1400-0x147f] has been reserved
[ 1.937317] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 1.943227] system 00:00: [io 0x1800-0x187f] has been reserved
[ 1.949138] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 1.955051] system 00:00: [io 0x2000-0x207f] has been reserved
[ 1.960963] system 00:00: [io 0x2080-0x20ff] has been reserved
[ 1.966874] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.973700] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 1.983769] pnp 00:01: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 1.993833] pnp 00:01: disabling [io 0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.003899] pnp 00:01: disabling [io 0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.013969] pnp 00:01: disabling [io 0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.024030] pnp 00:01: disabling [io 0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.034095] pnp 00:01: disabling [io 0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.044162] pnp 00:01: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.054225] pnp 00:01: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.064402] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 2.070332] system 00:01: [io 0x0800-0x087f] has been reserved
[ 2.076245] system 00:01: [io 0x0290-0x029f] has been reserved
[ 2.082158] system 00:01: [io 0x0290-0x0297] has been reserved
[ 2.088070] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.094855] pnp 00:02: [dma 4]
[ 2.097998] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.104585] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 2.112577] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.119195] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.125796] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.132323] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:3)
[ 2.140466] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.147347] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 2.155344] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.162866] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 2.169477] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.176445] system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
[ 2.183394] system 00:09: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 2.189999] system 00:09: [mem 0xb7ee0000-0xb7efffff] could not be reserved
[ 2.196947] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 2.203549] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.210502] system 00:09: [mem 0x00100000-0xb7edffff] could not be reserved
[ 2.217452] system 00:09: [mem 0xb8000000-0xbfffffff] has been reserved
[ 2.224054] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.231005] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.237609] system 00:09: [mem 0xfefff000-0xfeffffff] has been reserved
[ 2.244212] system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
[ 2.250816] system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
[ 2.257419] system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
[ 2.264023] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.270808] pnp: PnP ACPI: found 10 devices
[ 2.274988] ACPI: ACPI bus type pnp unregistered
[ 2.287847] pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 2.295062] pci 0000:00:01.0: BAR 2: assig46] pci 0000:01:06.0: BAR 6: assigned [mem 0xfdf00000-0xfdf3ffff pref]
[ 2.308353] pci 0000:01:08.0: BAR 6: assigned [mem 0xfdf40000-0xfdf5ffff pref]
[ 2.315564] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 2.320522] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 2.326608] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 2.333384] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 2.340595] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 2.345553] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 2.351637] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 2.358415] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 2.366144] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 2.371101] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 2.377186] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 2.383962] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 2.391692] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 2.396650] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 2.402737] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 2.409513] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 2.417249] pci 0000:00:04.0: setting latency timer to 64
[ 2.422646] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 2.428206] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 2.433771] pci_bus 0000:00: resource 6 [io 0x8000-0xffff]
[ 2.439336] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
[ 2.444902] pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80]
[ 2.450466] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff]
[ 2.456724] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[ 2.463068] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xefffffff]
[ 2.469413] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff]
[ 2.475758] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 2.481322] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 2.487585] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[ 2.494278] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[ 2.499843] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[ 2.505409] pci_bus 0000:01: resource 6 [io 0x8000-0xffff]
[ 2.510975] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df]
[ 2.516538] pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80]
[ 2.522103] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff]
[ 2.528362] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff]
[ 2.534704] pci_bus 0000:01: resource 11 [mem 0xc0000000-0xefffffff]
[ 2.541049] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff]
[ 2.547395] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 2.552958] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 2.559215] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 2.566426] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 2.571991] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 2.578249] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 2.585460] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 2.591024] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 2.597281] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 2.604531] NET: Registered protocol family 2
[ 2.609056] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 2.616441] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 2.623178] TCP: Hash tables configured (established 32768 bind 32768)
[ 2.629738] TCP: reno registered
[ 2.632971] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.638999] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.645514] NET: Registered protocol family 1
[ 2.649981] RPC: Registered named UNIX socket transport module.
[ 2.655896] RPC: Registered udp transport module.
[ 2.660592] RPC: Registered tcp transport module.
[ 2.665291] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.672039] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 2.677788] IOAPIC[0]: Set routing entry (4-22 -> 0x41 -> IRQ 22 Mode:1 Active:1 Dest:3)
[ 2.748603] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 2.754362] IOAPIC[0]: Set routing entry (4-21 -> 0x51 -> Ist:3)
[ 2.762562] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.768099] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.773635] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.779170] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.784702] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.790244] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.795779] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.801330] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.806819] pci 0000:00:0d.0: Boot video device
[ 2.811354] PCI: CLS 64 bytes, default 64
[ 2.815434] Unpacking initramfs...
[ 4.064465] Freeing initrd memory: 71644k freed
[ 4.091372] PCI-DMA: Disabling AGP.
[ 4.096149] PCI-DMA: aperture base @ ac000000 size 65536 KB
[ 4.101721] PCI-DMA: using GART IOMMU.
[ 4.105479] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 4.114763] Machine check injector initialized
[ 4.119215] LVT offset 1 assigned for vector 0x400
[ 4.124006] IBS: LV patch_level=0x01000098
[ 4.142514] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.151281] Scanning for low memory corruption every 60 seconds
[ 4.157508] audit: initializing netlink socket (disabled)
[ 4.162926] type=2000 audit(1362360524.432:1): initialized
[ 4.181598] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.188400] VFS: Disk quotas dquot_6.5.2
[ 4.192665
[ 4.220903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 4.228301] io scheduler noop registered
[ 4.232224] io scheduler deadline registered
[ 4.236499] io scheduler cfq registered (default)
[ 4.241359] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 4.246745] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 4.252085] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 4.257508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.263343] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.271692] ACPI: Power Button [PWRB]
[ 4.275455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.282863] ACPI: Power Button [PWRF]
[ 4.286704] ACPI: Fan [FAN] (on)
[ 4.292508] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20130117/nsprepkg-119)
[ 4.302456] ACPI: [Package] has zero elements (ffff88012b0b7fc0)
[ 4.308454] ACPI: Invalid passive threshold
[ 4.312934] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.318598] ACPI: Thermal Zone [THRM] (18 C)
[ 4.323034] GHES: HEST is not enabled!
[ 4.326787] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 4.352959] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.379695] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.386064] Non-volatile memory driver v1.3
[ 4.390339] Linux agpgart interface v0.103
[ 4.394635] [drm] Initialized drm 1.1.0 20060810
[ 4.400186] loop: module loaded
[ 4.403476] libphy: Fixed MDIO Bus: probed
[ 4.407579] tun: Universal TUN/TAP device driver, 1.6
[ 4.412623] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 4.418934] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 4.426497] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 4.432246] IOAPIC[0]: Set routing entry (4-20 -> 0x91 -> IRQ 20 Mode:1 Active:1 Dest:3)
[ 4.440330] forcedeth 0000:00:07.0: setting latency timer to 64
[ 4.967103] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:30:67:6a:6f:d1
[ 4.975367] forcedeth 0000:00:ghdma pwrctl mgmt lnktim msi desc-v3
[ 4.982508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.989033] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 4.995031] ehci-pci: EHCI PCI platform driver
[ 4.999602] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 5.005433] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 5.010791] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 5.018182] ehci-pci 0000:00:02.1: debug port 1
[ 5.022713] ehci-pci 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10
[ 5.031150] ehci-pci 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
[ 5.037751] ehci-pci 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 5.045838] ehci-pci 0000:00:02.1: park 0
[ 5.049846] ehci-pci 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 5.058700] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 5.065473] ehci-pci 0000:00:02.1: supports USB remote wakeup
[ 5.071232] ehci-pci 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 5.076881] ehci-pci 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 5.090094] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 5.095884] usb usb1: default language 0x0409
[ 5.100248] usb usb1: udev 1, busnum 1, minor = 0
[ 5.104949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.111725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.118936] usb usb1: Product: EHCI Host Controller
[ 5.123806] usb usb1: Manufacturer: Linux 3.8.0upstream-10478-g31c7742-dirty ehci_hcd
[ 5.131622] usb usb1: SerialNumber: 0000:00:02.1
[ 5.136337] tsc: Refined TSC clocksource calibration: 2913.425 MHz
[ 5.142514] Switching to clocksource tsc
[ 5.146455] usb usb1: usb_probe_device
[ 5.150197] usb usb1: configuration #1 chosen from 1 choice
[ 5.155763] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 5.161591] hub 1-0:1.0: usb_probe_interface
[ 5.165860] hub 1-0:1.0: usb_probe_interface - got id
[ 5.170906] hub 1-0:1.0: USB hub found
[ 5.174657] hub 1-0:1.0: 10 ports detected
[ 5.178745] hub 1-0:1.0: standalone hub
[ 5.182573] hub 1-0:1.0: no power switching (usb 1.0)
[ 5.187618] hub 1-0:1.0: individual port over-current protection
[ 5.193615] hub 1-0:1.0: power on to power good time: 20ms
[ 5.199086] hub 1-0:1.0: local power source is good
[ 5.203988] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 5.211003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.217182] ohci_hcd: block sizes: ed 80 td 96
[ 5.221768] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 5.227611] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 5.232959] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 5.240349] ohci_hcd 0000:00:02.0: created debug files
[ 5.245477] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 5.251234] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[ 5.309796] ohci_hcd 0000:00:02.0: OHCI controller state
[ 5.315106] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support r:00:02.0: intrstatus 0x00000004 SF
[ 5.341774] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
[ 5.348462] ohci_hcd 0000:00:02.0: hcca frame #0029
[ 5.353333] ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
[ 5.360447] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 5.367042] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 5.372946] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 5.379636] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 5.386317] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 5.393000] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
[ 5.399691] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
[ 5.406380] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
[ 5.413061] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
[ 5.419743] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
[ 5.426425] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
[ 5.433106] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
[ 5.439805] usb usb2: default language 0x0409
[ 5.444163] usb usb2: udev 1, busnum 2, minor = 128
[ 5.449031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.455799] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.463000] usb usb2: Product: OHCI Host Controller
[ 5.467865] usb usb2: Manufacturer: Linux 3.8.0upstream-10478-g31c7742-dirty ohci_hcd
[ 5.475679] usb usb2: SerialNumber: 0000:00:02.0
[ 5.480390] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 5.485963] usb usb2: usb_probe_device
[ 5.489714] usb usb2: configuration #1 chosen from 1 choice
[ 5.495280] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 5.501116] hub 2-0:1.0: usb_probe_interface
[ 5.505384] hub 2-0:1.0: usb_probe_interface - got id
[ 5.510429] hub 2-0:1.0: USB hub found
[ 5.514173] hub 2-0:1.0: 10 ports detected
[ 5.518262] hub 2-0:1.0: standalone hub
[ 5.522087] hub 2-0:1.0: no power switching (usb 1.0)
[ 5.527125] hub 2-0:1.0: global over-current protection
[ 5.532343] hub 2-0:1.0: power on to power good time: 2ms
[ 5.537729] hub 2-0:1.0: local power source is good
[ 5.542602] hub 2-0:1.0: no over-current condition exists
[ 5.548021] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 5.554912] ehci-pci 0000:00:02.1: HS companion for 0000:00:02.0
[ 5.561035] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.567535] usbcore: registered new interface driver usblp
[ 5.573196] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.614302] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 5.622198] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 5.654369] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 5.879128] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.884273] mousedev: PS/2 mouse device common for all mice
[ 5. core: registered rtc_cmos as rtc0
[ 5.901115] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 5.908823] cpuidle: using governor ladder
[ 5.912909] cpuidle: using governor menu
[ 5.916829] EFI Variables Facility v0.08 2004-May-17
[ 5.922045] zram: Created 1 device(s) ...
[ 5.926257] Netfilter messages via NETLINK v0.30.
[ 5.930965] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.937117] ctnetlink v0.93: registering with nfnetlink.
[ 5.942597] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.948070] TCP: cubic registered
[ 5.951399] Initializing XFRM netlink socket
[ 5.955704] NET: Registered protocol family 10
[ 5.960288] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.965833] sit: IPv6 over IPv4 tunneling driver
[ 5.970724] NET: Registered protocol family 17
[ 5.975214] Key type dns_resolver registered
[ 5.979802]
[ 5.979802] printing PIC contents
[ 5.984599] ... PIC IMR: ffff
[ 5.987654] ... PIC IRR: 0ca0
[ 5.990717] ... PIC ISR: 0000
[ 5.993765] ... PIC ELCR: 8ca0
[ 5.996832] printing local APIC contents on CPU#0/0:
[ 6.001784] ... APIC ID: 00000000 (0)
[ 6.005870] ... APIC VERSION: 80050010
[ 6.009607] ... APIC TASKPRI: 00000000 (00)
[ 6.013780] ... APIC ARBPRI: 000000e0 (e0)
[ 6.017865] ... APIC PROCPRI: 00000000
[ 6.021603] ... APIC LDR: 01000000
[ 6.024995] ... APIC DFR: ffffffff
[ 6.028389] ... APIC SPIV: 000001ff
[ 6.031868] ... APIC ISR field:
[ 6.035001] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.042167] ... APIC TMR field:
[ 6.045300] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.052467] ... APIC IRR field:
[ 6.055600] 0000000000000000000000000000000000000000000000000000000000008000
[ 6.062767] ... APIC ESR: 00000000
[ 6.066158] ... APIC ICR: 000208fd
[ 6.069552] ... APIC ICR2: 02000000
[ 6.073032] ... APIC LVTT: 000000ef
[ 6.076511] ... APIC LVTPC: 00000400
[ 6.080075] ... APIC LVT0: 00010700
[ 6.083555] ... APIC LVT1: 00000400
[ 6.087034] ... APIC LVTERR: 000000fe
[ 6.090687] ... APIC TMICT: 00003003
[ 6.094254] ... APIC TMCCT: 00000000
[ 6.097819] ... APIC TDCR: 00000003
[ 6.101298] ... APIC EFEAT: 00040007
[ 6.104863] ... APIC ECTRL: 00000000
[ 6.108430] ... APIC EILVT0: 000000f9
[ 6.112083] ... APIC EILVT1: 00000400
[ 6.115733] ... APIC EILVT2: 00010000
[ 6.119386] ... APIC EILVT3: 00010000
[ 6.123038]
[ 6.124527] number of MP IRQ sources: 15.
[ 6.128533] number of IO-APIC #4 registers: 24.
[ 6.133054] testing the IO APIC.......................
[ 6.138183] IO APIC #4......
[ 6.141065] .... register #00: 00000000
[ 6.144895] ....... : physical APIC id: 00
[ 6.149241] ....... : Delivery Type: 0
[ 6.153246] ....... : LTS : 0
[ 6.157245] .... register #01: 00170011
[ 6.161070] ....... : max redirection entries: 17
[ 6.166107] ....... : PRQ implemented: 0
[ 6.170366] ....... : IO APIC version: 11
[ 6.174712] .... register #02: 00000000
[ 6.178537] ....... : arbitration: 00
[ 6.182535] .... IRQ redirection table:
[ 6.186364] 1 0 0 0 0 0 0 00
[ 6.190891] 0 0 0 0 0 1 1 31
[ 6.195418] 0 0 0 0 0 1 1 30
[ 6.199943] 0 0 0 0 0 1 1 33
[ 6.204470] 0 0 0 0 0 1 1 34
[ 6.208996] 1 0 0 0 0 1 1 35
[ 6.213523] 0 0 0 0 0 1 1 36
[ 6.218051] 1 0 0 0 0 1 1 37
[ 6.222577] 0 0 0 0 0 1 1 38
[ 6.227102] 0 1 0 0 0 1 1 39
[ 6.231629] 1 0 0 0 0 1 1 3A
[ 6.236155] 1 0 0 0 0 1 1 3B
[ 6.240682] 1 0 0 0 0 1 1 3C
[ 6.245210] 0 0 0 0 0 1 1 3D
[ 6.249736] 0 0 0 0 0 1 1 3E
[ 6.254263] 0 0 0 0 0 1 1 3F
[ 6.258788] 1 0 0 0 0 0 0 00
[ 6.263315] 1 0 0 0 0 0 0 00
[ 6.267842] 1 0 0 0 0 0 0 00
[ 6.272367] 1 0 0 0 0 0 0 00
[ 6.276894] 1 1 0 1 0 1 1 91
[ 6.281420] 0 1 0 1 0 1 1 51
[ 6.285948] 0 1 0 1 0 1 1 41
[ 6.290475] 1 0 0 0 0 0 0 00
[ 6.294998] IRQ to pin mappings:
[ 6.298226] IRQ0 -> 0:2
[ 6.300698] IRQ1 -> 0:1
[ 6.303173] IRQ3 -> 0:3
[ 6.305649] IRQ4 -> 0:4
[ 6.308132] IRQ5 -> 0:5
[ 6.310607] IRQ6 -> 0:6
[ 6.313085] IRQ7 -> 0:7
[ 6.315560] IRQ8 -> 0:8
[ 6.318034] IRQ9 -> 0:9
[ 6.320511] IRQ10 -> 0:10
[ 6.323157] IRQ11 -> 0:11
[ 6.325806] IRQ12 -> 0:12
[ 6.328456] IRQ13 -> 0:13
[ 6.331103] IRQ14 -> 0:14
[ 6.333752] IRQ15 -> 0:15
[ 6.336403] IRQ20 -> 0:20
[ 6.339048] IRQ21 -> 0:21
[ 6.341697] IRQ22 -> 0:22
[ 6.344353] .................................... done.
[ 6.349624] PM: Hibernation image not present or could not be loaded.
[ 6.356061] registered taskstats version 1
[ 6.360598] Magic number: 5:309:457
[ 6.364471] zcache: using lzo compressor
[ 6.368430] zcache: cleancache enabled using kernel transcendent memory and compression buddies
[ 6.377106] zcache: cleancache: ignorenonactive = 1
[ 6.381970] zcache: frontswap enabled using kernel transcendent memory and compression buddies
[ 6.390557] zcache: frontswap: excl gets = 1 active only = 1
[ 6.397032] Freeing unused kernel memory: 1032k freed
[ 6.402360] Write protecting the kernel read-only data: 10240k
[ 6.411453] Freeing unused kernel memory: 1568k freed
[ 6.417241] Freeing unused kernel memory: 116k freed
init started: BusyBox v1.14.3 ([ 6.424574] consoletype (1171) used greatest stack depth: 5288 bytes left
2013-03-03 18:12:45 EST)
Mounting directories [ OK ]
mount: mount point /proc/bus/usb does not exist
mount: mount po[ 6.543225] core_filesystem (1172) used greatest stack depth: unary operator expected
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 6.606301] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.613341] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.619356] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 6.625102] IOAPIC[0]: Set routing entry (4-18 -> 0xa1 -> IRQ 18 Mode:1 Active:1 Dest:3)
[ 6.636562] SCSI subsystem initialized
[ 6.644606] ACPI: bus type scsi registered
[ 6.649123] wmi: Mapper loaded
[ 6.654654] libata version 3.00 loaded.
udevd-work[1536]: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for writing: No such file or directory
[ 6.721681] ip (1700) used greatest stack depth: 3928 bytes left
Waiting for devices [ OK ]
[ 6.900112] sata_nv 0000:00:08.0: version 3.5
[ 6.904730] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 6.91047G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 6.946301] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[ 6.953260] ata2: SATA max UDMA/133 cmd 0x9700:01:06.0 eth1: (PCI:33MHz:32-bit) 00:04:23:a7:5a:01
[ 6.981504] e1000 0000:01:06.0 eth1: Intel(R) PRO/1000 Network Connection
^G^G^G^G^G^G^G^G[ 6.988624] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
^G^G^G^G^G^G^G^G[ 6.995447] IOAPIC[0]: Set routing entry (4-16 -> 0xc1 -> IRQ 16 Mode:1 Active:1 Dest:3)
^G^G^G^G^G^G^G^G[ 7.004948] skge: 1.14 addr 0xfd8fc000 irq 16 chip Yukon rev 1
^G^G^G^G^G^G^G^G[ 7.012792] skge 0000:01:08.0 eth2: addr 00:0a:5e:65:74:93
^G^G^G[ 7.021419] scsi2 : sata_nv
[ 7.024680] scsi3 : sata_nv
[ 7.027618] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23
[ 7.034564] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23
[ 7.041611] nouveau 0000:00:0d.0: setting latency timer to 64
[ 7.047592] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22
[ 7.053647] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 7.059735] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 7.065815] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 7.072133] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 7.117667] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 7.124097] nouveau [ VBIOS][0000:00:0d.0] using
[ 7.136743] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.22.01
^G^G^G[ 7.143324] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
^G^G^G^G^G^G^G^G[ 7.149626] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 7.156922] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
^G^G^G^G^G[ 7.188682] nouveau [ PTHERM][0000:00:0d.0] FAN control: none / external
[ 7.195547] nouveau [ PTHERM][0000:00:0d.0] d.0] programmed thresholds [ 90(2), 95(3), 145(2), 135(5) ]
[ 7.221515] nouveau [ PTHERM][0000:00:0d.0] temperature (70 C) hit the 'fanboost' threshold
[ 7.230012] nouveau [ PTHERM][0000:00:0d.0] Thermal management: automatic
[ 7.236965] nouveau [ PTHERM][0000:00:0d.0] temperature (70 C) hit the 'downclock' threshold
[ 7.245557] nouveau [ PTHERM][0000:00:0d.0] temperature (74 C) hit the 'critical' threshold
[ 7.254056] nouveau [ PTHERM][0000:00:0d.0] temperature (72 C) hit the 'shutdown' threshold
^G^G^G^G^G^G^G^G[ 7.262725] [TTM] Zone kernel: Available graphics memory: 1963792 kiB
[ 7.270566] [TTM] Initializing pool allocator
^G^G^G^G[ 7.274924] [TTM] Initializing DMA pool allocator
[ 7.285469] ata1: SATA link down (SStatus 0 SControl 300)
[ 7.291190] nouveau [ DRM] VRAM: 125 MiB
[ 7.295546] nouveau [ DRM] GART: 512 MiB
[ 7.299898] nouveau [ DRM] TMDS table version 1.1
[ 7.305028] nouveau [ DRM] DCB version 3.0
Usage: /etc/init[ 7.309556] nouveau [ DRM] DCB outp 00: 01000310 00000023
.d/halt {start}[ 7.316756] nouveau [ DRM] DCB outp 01: 00110204 97e50000
[ 7.323955] nouveau [ DRM] DCB conn 00: 0000
The system is g[ 7.328890] nouveau [ DRM] Saving VGA fonts
oing down NOW!
Sent SIGTERM to all processes
[ 7.375488] ata3: SATA link down (SStatus 0 SControl 300)
[ 7.375645] nouveau W[ DRM] DCB type 4 not known
[ 7.375646] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 7.377229] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.377230] [drm] No driver support for vblank timestamp query.
[ 7.377761] nouveau [ DRM] 1 available performance level(s)
[ 7.377763] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 7.377764] nouveau [ DRM] c:
[ 7.421179] nouveau [ DRM] MM: using M2MF for buffer copies
[ 7.460877] nouveau 0000:00:0d.0: No connectors reported connected with modes
[ 7.468003] [drm] Cannot find any crtc or sevice
[ 7.489812] Console: switching to colour frame buffer device 128x48
[ 7.502602] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 7.508947] nouveau 0000:00:0d.0: registered panic notifier
[ 7.514525] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
^G^G^G^G^G^G[ 7.522018] kvm: Nested Virtualization enabled
^G^G^G^G^G^G^G^G[ 7.527416] kvm: Nested Paging enabled
^G^G^G^G^G^G^G^Gudevd-work[1273]: '/sbin/modprobe -b pci:v000010DEd000003D0sv00001565sd00001405bc03sc00i00' unexpected exit with status 0x000f
udevd-work[1536]: '/sbin/modprobe -b x86cpu:vendor:0002:family:0010:model:0006:feature:,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0010,0011,0013,0017,0018,0019,001A,001C,0020,0021,0022,0023,0024,0025,0026,0027,0028,0029,002B,002C,002D,002E,002F,0030,0031,0034,0036,0037,0038,0039,003A,003B,003D,003E,003F,0064,0068,006A,006E,0070,0071,0074,0078,007A,0080,0083,008D,0097,00C0,00C1,00C2,00C3,00C4,00C5,00C6,00C7,00C8,00C9,00CA,00CC,00CD,00E8,0105,0106,0107,0108
' unexpected exit with status 0x000f
[ 7.634071] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.784456] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.793724] ata2.00: ATA-7: HDT722516DLA380, V43OA96A,red for UDMA/133
^G^G^G^G[ 7.817326] scsi 1:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
^G^G^G^G^G[ 8.138296] ata4: SATA link down (SStatus 0 SControl 300)
Sent SIGKILL to all processes
Requesting system poweroff
[ 9.326549] kvm: exiting hardware virtualization
[ 9.332053] pci 0000:00:04.0: System wakeup enabled by ACPI
[ 9.370526] ACPI: Preparing to enter system sleep state S5
[ 9.376550] Disabling non-boot CPUs ...
[ 9.381985] Power down.
[ 9.384756] acpi_power_off called
PXELINUX 3.82 2009-06-09 Copyright (C) 1994-2009 H. Peter Anvin et al
Loading latest/vmlinuz......................................................................
Loading latest/initramfs.cpio.gz...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ready.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0upstream-10478-g31c7742-dirty ([email protected]) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Sun Mar 3 18:33:20 EST 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7edffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7ee0000-0x00000000b7ee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7ee3000-0x00000000b7eeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7ef0000-0x00000000b7efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 09/03/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f3a30-0x000f3a3f] mapped at [c00f3a30]
[ 0.000000] mpc: f1f44-f2088
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] ACPI: RSDP 000f7e60 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT b7ee3000 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP b7ee3080 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
[ 0.000000] ACPI: DSDT b7ee3100 05B85 (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS b7ee0000 00040
[ 0.000000] ACPI: SSDT b7ee8d80 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET b7ee9680 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: MCFG b7ee96c0 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC b7ee8cc0 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffff9000 ( fee00000)
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x018ca000, 0x018cafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x379fffff]
[ 0.000000] [mem 0x34000000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7bcfd000-0x7fffefff]
[ 0.000000] Allocated new RAMDISK: [mem 0x338fc000-0x37bfdc28]
[ 0.000000] Move RAMDISK from [mem 0x7bcfd000-0x7fffec28] to [mem 0x338fc000-0x37bfdc28]
[ 0.000000] 4228MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x018cb000, 0x018cbfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x3fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb7edffff]
[ 0.000000] node 0: [mem 0x00000000-0x3fffffff]
[ 0.000000] On node 0 totalpages: 1015422
[ 0.000000] free_area_init_node: node 0, pgdat c1772700, node_mem_map f10fc020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8457 pages used for memmap
[ 0.000000] HighMem zone: 787170 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffff9000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 4, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 4, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 0e, APIC ID 4, APIC INT 0e
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] Int: type 0, pol 1, trig 1, bus 00, IRQ 0f, APIC ID 4, APIC INT 0f
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 4, APIC INT 01
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 4, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 4, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 4, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 4, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 4, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 4, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 4, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 4, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 4, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 4, APIC INT 0d
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffff8000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f10b2000 s35072 r0 d22272 u57344
[ 0.000000] pcpu-alloc: s35072 r0 d22272 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1013638
[ 0.000000] Kernel command line: initrd=latest/initramfs.cpio.gz zcache nofb debug selinux=0 console=ttyS0,115200 loglevel=10 apic=debug BOOT_IMAGE=latest/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3941936k/5242880k available (5761k kernel code, 119752k reserved, 1921k data, 544k init, 3148680k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc1781000 - 0xc1809000 ( 544 kB)
[ 0.000000] .data : 0xc15a0633 - 0xc1780bc0 (1921 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15a0633 (5761 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f0806000 soft=f0808000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2913.496 MHz processor
[ 0.000001] Calibratped), value calculated using timer frequency.. 5826.99 BogoMIPS (lpj=2913496)
[ 0.010611] pid_max: default: 32768 minimum: 301
[ 0.015243] Security Framework initialized
[ 0.019336] SELinux: Disabled at boot.
[ 0.023176] Mount-cache hash table entries: 512
[ 0.027830] Initializing cgroup subsys cpuacct
[ 0.032275] Initializing cgroup subsys freezer
[ 0.036729] CPU: Physical Processor ID: 0
[ 0.040739] CPU: Processor Core ID: 0
[ 0.044409] mce: CPU supports 6 MCE banks
[ 0.048419] LVT offset 0 assigned for vector 0xf9
[ 0.053126] process: using AMD E400 aware idle routine
[ 0.058260] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.058260] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.058260] tlb_flushall_shift: 4
[ 0.072938] Freeing SMP alternatives: 24k freed
[ 0.078911] ACPI: Core revision 20130117
[ 0.085610] ACPI: All ACPI Tables successfully acquired
[ 0.092445] Getting VERSION: 80050010
[ 0.096105] Getting VERSION: 80050010
[ 0.099765] Getting ID: 0
[ 0.102387] Getting ID: f000000
[ 0.105521] Getting LVT0: 700
[ 0.108489] Getting LVT1: 400
[ 0.111459] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.116853] enabled ExtINT on CPU#0
[ 0.120644] ESR value before enabling vector: 0x00000008 after: 0x00000000
[ 0.127592] ENABLING IO-APIC IRQs
[ 0.130905] init IO_APIC IRQs
[ 0.133875] apic 4 pin 0 not connected
[ 0.137712] IOAPIC[0]: Set routing entry (4-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.145626] IOAPIC[0]: Set routing entry (4-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.153527] IOAPIC[0]: Set routing entry (4-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.161429] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.169332] IOAPIC[0]: Set routing entry (4-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.177233] IOAPIC[0]: Set routing entry (4-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.185136] IOAPIC[0]: Set routing entry (4-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.193037] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.200939] IOAPIC[0]: Set routing entry (4-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.208841] IOAPIC[0]: Set routing entry (4-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.216917] IOAPIC[0]: Set routing entry (4-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.224992] IOAPIC[0]: Set routing entry (4-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.233067] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.241142] IOAPIC[0]: Set routing entry (4-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.249217] IOAPIC[0]: Set routing entry (4-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.257291] apic 4 pin 16 not connected
[ 0.261208] apic 4 pin 17 not connected
[ 0.265120] apic 4 pin 18 not connected
[ 0.269031] apic 4 pin 19 not connected
[ 0.272943] apic 4 pin 20 not connected
[ 0.276854] apic 4 pin 21 not connected
[ 0.280766] apic 4 pin 22 not connected
[ 0.284680] apic 4 pin 23 not connected
[ 0.288729] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.304706] smpboot: CPU0: AMD Athlon(tm) II X2 245 Processor (fam: 10, model: 06, stepping: 02)
[ 0.313519] Using local [ 0.422871] ... lapic delta = 1255731
[ 0.426523] ... PM-Timer delta = 357938
[ 0.430348] ... PM-Timer result ok
[ 0.433741] ..... delta 1255731
[ 0.436873] ..... mult: 53933235
[ 0.440093] ..... calibration result: 200916
[ 0.444353] ..... CPU clock speed is 2913.0295 MHz.
[ 0.449216] ..... host bus clock speed is 200.0916 MHz.
[ 0.454442] Performance Events: AMD PMU driver.
[ 0.458982] ... version: 0
[ 0.462979] ... bit width: 48
[ 0.467063] ... generic registers: 4
[ 0.471063] ... value mask: 0000ffffffffffff
[ 0.476359] ... max period: 00007fffffffffff
[ 0.481656] ... fixed-purpose events: 0
[ 0.485655] ... event mask: 000000000000000f
[ 0.491118] MCE: In-kernel MCE decoding enabled.
[ 0.495771] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.503848] CPU 1 irqstacks, hard=f08b8000 soft=f08ba000
[ 0.509146] smpboot: Booting Node 0, Processors #1[ 0.524076] Initializing CPU#1
[ 0.527142] masked ExtINT on CPU#1
[ 0.532640] Brought up 2 CPUs
[ 0.535793] smp
[ 0.543403] PM: Registering ACPI NVS region [mem 0xb7ee0000-0xb7ee2fff] (12288 bytes)
[ 0.551381] kworker/u:0 (20) used greatest stack depth: 7220 bytes left
[ 0.551423] RTC time: 1:44:12, date: 03/04/13
[ 0.562458] NET: Registered protocol family 16
[ 0.567272] kworker/u:0 (29) used greatest stack depth: 7072 bytes left
[ 0.573932] node 0 link 0: io port [8000, ffff]
[ 0.578457] TOM: 00000000c0000000 aka 3072M
[ 0.582634] Fam 10h mmconf [mem 0xf0000000-0xf00fffff]
[ 0.587759] node 0 link 0: mmio [a0000, bffff]
[ 0.592205] node 0 link 0: mmio [c0000000, efffffff]
[ 0.597174] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.602140] node 0 link 0: mmio [f0000000, f03fffff] ==> [f0100000, f03fffff]
[ 0.609291] TOM2: 0000000140000000 aka 5120M
[ 0.613551] bus: [bus 00-04] on node 0 link 0
[ 0.617902] bus: 00 [io 0x0000-0xffff]
[ 0.621729] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.626247] bus: 00 [mem 0xc0000000-0xefffffff]
[ 0.630764] bus: 00 [mem 0xf0400000-0xffffffff]
[ 0.635281] bus: 00 [mem 0xf0100000-0xf03fffff]
[ 0.639801] bus: 00 [mem 0x140000000-0xfcffffffff]
[ 0.644644] ACPI: bus type pci registered
[ 0.648783] dca service started, version 1.12.1
[ 0.653390] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.662679] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.669457] PCI: Using MMCONFIG for extended config space
[ 0.674845] PCI: Using configuration type 1 for base access
[ 0.686986] bio: create slab <bio-0> at 0
[ 0.691224] ACPI: Added _OSI(Module Device)
[ 0.695457] ACPI: Added _OSI(Pr(3.0 _SCP Extensions)
[ 0.704582] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.710756] ACPI: EC: Look up EC in DSDT
[ 0.718178] ACPI: Interpreter enabled
[ 0.721837] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.732650] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.741878] S3 S4 S5)
[ 0.744290] ACPI: Using IOAPIC for interrupt routing
[ 0.749332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.767542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.773908] acpi PNP0A08:00: Requesting ACPI _OSC contACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.790191] PCI host bridge to bus 0000:00
[ 0.794297] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.799769] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.805930] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.812095] pci_bus 0000:00: root bus resource [io 0x8000-0xffff]
[ 0.818266] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.824434] pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80]
[ 0.830599] pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff]
[ 0.837463] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.844324] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
[ 0.851181] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff]
[ 0.858063] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.864336] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.870349] pci 0000:00:01.0: reg 18: [io 0x1d00-0x1dff]
[ 0.875845] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.881848] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.887248] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.892640] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.898054] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.903976] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.910136] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.916135] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.922241] pci 0000:00:02.0: supports D1 D2
[ 0.926503] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.933123] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.938854] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.944854] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.950986] pci 0000:00:02.1: supports D1 D2
[ 0.955246] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.961880] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.967618] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.973657] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.979381] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.985384] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff]
[ 0.991505] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.997356] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 1.003083] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 1.009103] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 1.014594] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[ 1.020601] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 1.026686] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07]
[ 1.032107] pci 0000:00:07.0: supports D1 D2
[ 1.036369] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.042996] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 1.048725] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 1.054734] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 1.060120] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 1.065513] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 1.070905] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 1.076296] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f]
[ 1.081689] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 1.087876] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 1.093884] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 1.099276] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 1.104666] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 1.110059] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 1.115452] pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f]
[ 1.120843] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 1.127029] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 1.133047] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.139667] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 1.145403] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 1.151425] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.158047] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 1.163783] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 1.169801] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.176430] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 1.182148] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 1.188149] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 1.194239] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.201275] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 1.207879] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.214502] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 1.220622] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 1.226741] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 1.232855] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 1.238976] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 1.245158] pci 0000:01:06.0: [8086:1026] type 00 class 0x020000
[ 1.251165] pci 0000:01:06.0: reg 10: [mem 0xfd8c0000-0xfd8dffff 64bit]
[ 1.257770] pci 0000:01:06.0: reg 18: [mem 0xfd880000-0xfd8bffff 64bit]
[ 1.264371] pci 0000:01:06.0: reg 20: [io 0xbc00-0xbc3f]
[ 1.269768] pci 0000:01:06.0: reg 30: [mem 0x00000000-0x0003ffff pref]
[ 1.276308] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold
[ 1.282483] pci 0000:01:08.0: [10b7:1700] type 00 class 0x020000
[ 1.288493] pci 0000:01:08.0: reg 10: [mem 0xfd8fc000-0xfd8fffff]
[ 1.294590] pci 0000:01:08.0: reg 14: [io 0xb800-0xb8ff]
[ 1.300007] pci 0000:01:08.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.306548] pci 0000:01:08.0: supports D1 D2
[ 1.310807] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.317506] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 1.324286] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 1.330382] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 1.337154] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 1.344364] pci 0000:00:04.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 1.352264] pci 0000:00:04.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 1.360159] pci 0000:00:04.0: bridge window [io 0x8000-0xffff] (subtractive decode)
[ 1.368059] pci 0000:00:04.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 1.375955] pci 0000:00:04.0: bridge window [io 0x1c00-0x1c80] (subtractive decode)
[ 1.383855] pci 0000:00:04.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
[ 1.392440] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.401026] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
[ 1.409612] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
[ 1.418285] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 1.423245] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 1.429339] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.436116] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 1.443930] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 1.448900] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 1.454991] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.461769] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 1.469571] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 1.474530] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 1.480613] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.487386] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.495112] pci_bus 0000:00: on NUMA node 0
[ 1.499285] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.506004] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 *7 9 10 11 14 15)
[ 1.512636] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.520425] ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
[ 1.527059] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.534844] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.542633] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.550423] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.558213] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.566003] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 1.572631] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.580431] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 1.587062] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 1.593690] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 1.600319] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.608109] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 1.614738] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
[ 1.621368] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 1.629156] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 1.635786] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 1.642458] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 1.647918] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 1.654335] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 1.659792] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 1.666211] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 1.672633] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 1.679055] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 1.685475] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 1.691900] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0
[ 1.697908] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 1.703913] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 1.709921] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled.
[ 1.716896] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
[ 1.722901] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
[ 1.728909] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 1.734915] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 1.741890] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 1.748867] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
[ 1.754317] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
[ 1.759870] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.764702] acpi root: \_SB_.PCI0 notify handler is installed
[ 1.770481] Found 1 acpi root devices
[ 1.774301] ACPI: No dock devices found.
[ 1.778419] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.786503] vgaarb: loaded
[ 1.789209] vgaarb: bridge control possible 0000:00:0d.0
[ 1.794676] ACPI: bus type usb registered
[ 1.798772] usbcore: registered new interface driver usbfs
[ 1.804303] usbcore: registered new interface driver hub
[ 1.809682] usbcore: registered new device driver usb
[ 1.814892] pps_core: LinuxPPS API ver. 1 registered
[ 1.819855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.829018] PTP clock support registered
[ 1.833054] PCI: Using ACPI for IRQ routing
[ 1.838655] PCI: pci_cache_line_size set to 64 bytes
[ 1.843621] pci 0000:00:01.0: no compatible bridge window for [io 0x1d00-0x1dff]
[ 1.851110] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 1.857107] e820: reserve RAM buffer [mem 0xb7ee0000-0xb7ffffff]
[ 1.863301] NetLabel: Initializing
[ 1.866704] NetLabel: domain hash size = 128
[ 1.871050] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.876016] NetLabel: unlabeled traffic allowed by default
[ 1.881747] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.888782] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 1.893818] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.901748] Switching to clocksource hpet
[ 1.907379] pnp: PnP ACPI init
[ 1.910452] ACPI: bus type pnp registered
[ 1.914698] system 00:00: [io 0x1000-0x107f] has been reserved
[ 1.920613] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 1.926522] system 00:00: [io 0x1400-0x147f] has been reserved
[ 1.932434] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 1.938345] system 00:00: [io 0x1800-0x187f] has been reserved
[ 1.944261] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 1.950169] system 00:00: [io 0x2000-0x207f] has been reserved
[ 1.956078] system 00:00: [io 0x2080-0x20ff] has been reserved
[ 1.961992] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.968816] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 1.978878] pnp 00:01: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 1.988942] pnp 00:01: disabling [io 0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 1.999008] pnp 00:01: disabling [io 0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.009075] pnp 00:01: disabling [io 0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.019138] pnp 00:01: disabling [io 0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.029207] pnp 00:01: disabling [io 0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.039271] pnp 00:01: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.049337] pnp 00:01: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
[ 2.059505] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 2.065431] system 00:01: [io 0x0800-0x087f] has been reserved
[ 2.071337] system 00:01: [io 0x0290-0x029f] has been reserved
[ 2.077249] system 00:01: [io 0x0290-0x0297] has been reserved
[ 2.083159] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.089946] pnp 00:02: [dma 4]
[ 2.093086] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.099668] IOAPIC[0]: Set routing entry (4-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[ 2.107664] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.114385] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.120978] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.127528] IOAPIC[0]: Set routing entry (4-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:3)
[ 2.135714] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.142591] IOAPIC[0]: Set routing entry (4-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[ 2.150600] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.158071] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 2.164673] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.171624] system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
[ 2.178583] system 00:09: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 2.185185] system 00:09: [mem 0xb7ee0000-0xb7efffff] could not be reserved
[ 2.192136] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 2.198740] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.205686] system 00:09: [mem 0x00100000-0xb7edffff] could not be reserved
[ 2.212638] system 00:09: [mem 0xb8000000-0xbfffffff] has been reserved
[ 2.219243] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.226193] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.232794] system 00:09: [mem 0xfefff000-0xfeffffff] has been reserved
[ 2.239400] system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
[ 2.246004] system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
[ 2.252608] system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
[ 2.259210] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.265994] pnp: PnP ACPI: found 10 devices
[ 2.270176] ACPI: ACPI bus type pnp unregistered
[ 2.312720] pci 0000:00:0d.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 2.319935] pci 0000:00:01.0: BAR 2: assig2.340436] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 2.345396] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 2.351482] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 2.358257] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff pref]
[ 2.365475] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 2.370434] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 2.376520] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 2.383301] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 2.391041] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 2.396006] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 2.402094] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 2.408878] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 2.416616] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 2.421584] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 2.427676] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 2.434455] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 2.442191] pci 0000:00:04.0: setting latency timer to 64
[ 2.447595] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 2.453165] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 2.458735] pci_bus 0000:00: resource 6 [io 0x8000-0xffff]
[ 2.464303] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
[ 2.469875] pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80]
[ 2.475443] pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff]
[ 2.481706] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
[ 2.488053] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xefffffff]
[ 2.494405] pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff]
[ 2.500759] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 2.506330] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 2.512597] pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff pref]
[ 2.519297] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[ 2.524868] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[ 2.530435] pci_bus 0000:01: resource 6 [io 0x8000-0xffff]
[ 2.536007] pci_bus 0000:01: resource 7 [io 0x03b0-0x03df]
[ 2.541584] pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80]
[ 2.547149] pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff]
[ 2.553408] pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff]
[ 2.559756] pci_bus 0000:01: resource 11 [mem 0xc0000000-0xefffffff]
[ 2.566102] pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff]
[ 2.572455] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 2.578027] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 2.584294] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 2.591513] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 2.597082] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 2.603351] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 2.610571] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 2.616138] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 2.622400] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 2.629653] NET: Registered protocol family 2
[ 2.634123] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.641206] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.647673] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.654039] TCP: reno registered
[ 2.657275] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.663198] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.669595] NET: Registered protocol family 1
[ 2.674045] RPC: Registered named UNIX socket transport module.
[ 2.680020] RPC: Registered udp transport module.
[ 2.684727] RPC: Registered tcp transport module.
[ 2.689434] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.696154] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 2.701904] IOAPIC[0]: Set routing entry (4-22 -> 0x41 -> IRQ 22 Mode:1 Active:1 Dest:3)
[ 2.772929] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 2.778681] IOAPIC[0]: Set routing entry (4-21 -> 0x51 -> IRQ 21 Mode:1 Active:1 Dest:3)
[ 2.786854] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.792380] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.797910] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.803437] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.808969] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.814503] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.820036] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.825576] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 2.831052] pci 0000:00:0d.0: Boot video device
[ 2.835584] PCI: CLS 64 bytes, default 64
[ 2.839666] Unpacking initramfs...
[ 4.187454] Freeing initrd memory: 68616k freed
[ 4.213393] Machine check injector initialized
[ 4.217845] LVT offset 1 assigned for vector 0x400
[ 4.222660] IBS: LVT offset 1 assigned
[ 4.226431] perf: AMD IBS detected (0x0000001f)
[ 4.231342] microcode: CPU0: patch_level=0x01000098
[ 4.236216] microcode: CPU1: patch_level=0x01000098
[ 4.241169] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.249947] Scanning for low memory corruption every 60 seconds
[ 4.256211] audit: initializing netlink socket (disabled)
[ 4.261620] type=2000 audit(1362361452.833:1): initialized
[ 4.280126] bounce pool size: 64 pages
[ 4.283886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.290611024 (order 0, 4096 bytes)
[ 4.301269] NFS: Registering the id_resolver key type
[ 4.306332] Key type id_resolver registered
[ 4.310515] Key type id_legacy registered
[ 4.314526] NTFS driver 2.1.30 [Flags: R/W].
[ 4.318926] msgmni has been set to 1683
[ 4.323143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 4.330541] io scheduler noop registered
[ 4.334459] io scheduler deadline registered
[ 4.338736] io scheduler cfq registered (default)
[ 4.343580] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 4.348898] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 4.354218] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 4.359641] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.365518] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.373863] ACPI: Power Button [PWRB]
[ 4.377609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.384990] ACPI: Power Button [PWRF]
[ 4.388825] ACPI: Fan [FAN] (on)
[ 4.394530] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20130117/nsprepkg-119)
[ 4.404480] ACPI: [Package] has zero elements (f0a23220)
[ 4.409783] ACPI: Invalid passive threshold
[ 4.414251] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.419903] ACPI: Thermal Zone [THRM] (20 C)
[ 4.424397] GHES: HEST is not enabled!
[ 4.428146] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 4.438341] kworker/u:1 (672) used greatest stack depth: 6992 bytes left
[ 4.459055] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.485801] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.492168] Non-volatile memory driver v1.3
[ 4.496504] Linux agpgart interface v0.103
[ 4.501234] [drm] Initialized drm 1.1.0 20060810
[ 4.506755] loop: module loaded
[ 4.510098] libphy: Fixed MDIO Bus: probed
[ 4.514203] tun: Universal TUN/TAP device driver, 1.6
[ 4.519244] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 4.525570] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 4.533139] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 4.538878] IOAPIC[0]: Set routing entry (4-20 -> 0x91 -> IRQ 20 Mode:1 Active:1 Dest:3)
[ 4.546954] forcedeth 0000:00:07.0: setting latency timer to 64
[ 5.074382] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:30:67:6a:6f:d1
[ 5.082646] forcedeth 0000:00:ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 5.102179] ehci-pci: EHCI PCI platform driver
[ 5.106723] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 5.112549] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 5.117856] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 5.125258] ehci-pci 0000:00:02.1: debug port 1
[ 5.129783] ehci-pci 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10
[ 5.138209] ehci-pci 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0
[ 5.144821] ehci-pci 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
[ 5.152911] ehci-pci 0000:00:02.1: park 0
[ 5.156923] ehci-pci 0000:00:02.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 5.165786] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 5.172560] ehci-pci 0000:00:02.1: supports USB remote wakeup
[ 5.178333] ehci-pci 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 5.183993] ehci-pci 0000:00:02.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 5.197338] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 5.203123] usb usb1: default language 0x0409
[ 5.207490] usb usb1: udev 1, busnum 1, minor = 0
[ 5.212193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.218968] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.226176] usb usb1: Product: EHCI Host Controller
[ 5.231052] usb usb1: Manufacturer: Linux 3.8.0upstream-10478-g31c7742-dirty ehci_hcd
[ 5.231302] tsc: Refined TSC clocksource calibration: 2913.425 MHz
[ 5.231306] Switching to clocksource tsc
[ 5.248942] usb usb1: SerialNumber: 0000:00:02.1
[ 5.253667] usb usb1: usb_probe_device
[ 5.257414] usb usb1: configuration #1 chosen from 1 choice
[ 5.262983] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 5.268806] hub 1-0:1.0: usb_probe_interface
[ 5.273068] hub 1-0:1.0: usb_probe_interface - got id
[ 5.278113] hub 1-0:1.0: USB hub found
[ 5.281853] hub 1-0:1.0: 10 ports detected
[ 5.285944] hub 1-0:1.0: standalone hub
[ 5.289770] hub 1-0:1.0: no power switching (usb 1.0)
[ 5.294807] hub 1-0:1.0: individual port over-current protection
[ 5.300798] hub 1-0:1.0: power on to power good time: 20ms
[ 5.306279] hub 1-0:1.0: local power source is good
[ 5.311181] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 5.318156] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.324322] ohci_hcd: block sizes: ed 64 td 64
[ 5.328865] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 5.334682] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 5.339981] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 5.347383] ohci_hcd 0000:00:02.0: created debug files
[ 5.352511] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 5.358270] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000
[ 5.416048] ohci_hcd 0000:00:02.0: OHCI controller state
[ 5.421356] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers, rh state running
[ 5.429609] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
[ 5.436998] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
[ 5.442477] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
[ 5.448041] ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
[ 5.454734] ohci_hcd 0000:00:02.0: hcca frame #0029
[ 5.459614] ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
[ 5.466737] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 5.473340] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 5.479253] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 5.485950] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 5.492641] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 5.499332] ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
[ 5.506021] ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
[ 5.512712] ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
[ 5.519406] ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
[ 5.526100] ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
[ 5.532791] ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
[ 5.539483] ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
[ 5.546183] usb usb2: default language 0x0409
[ 5.550546] usb usb2: udev 1, busnum 2, minor = 128
[ 5.555422] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.562201] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.569411] usb usb2: Product: OHCI Host Controller
[ 5.574281] usb usb2: Manufacturer: Linux 3.8.0upstream-10478-g31c7742-dirty ohci_hcd
[ 5.582092] usb usb2: SerialNumber: 0000:00:02.0
[ 5.586793] hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 5.586860] usb usb2: usb_probe_device
[ 5.586862] usb usb2: configuration #1 chosen from 1 choice
[ 5.586871] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 5.586913] hub 2-0:1.0: usb_probe_interface
[ 5.586914] hub 2-0:1.0: usb_probe_interface - got id
[ 5.586916] hub 2-0:1.0: USB hub found
[ 5.586921] hub 2-0:1.0: 10 ports detected
[ 5.586922] hub 2-0:1.0: standalone hub
[ 5.586922] hub 2-0:1.0: no power switching (usb 1.0)
[ 5.586923] hub 2-0:1.0: global over-current protection
[ 5.586924] hub 2-0:1.0: power on to power good time: 2ms
[ 5.586927] hub 2-0:1.0: local power source is good
[ 5.586928] hub 2-0:1.0: no over-current condition exists
[ 5.586961] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 5.587002] ehci-pci 0000:00:02.1: HS companion for 0000:00:02.0
[ 5.587039] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.673476] usbcore: registered new interface driver usblp
[ 5.679121] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.719322] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 5.727222] i8042: If AUX port is 0:1.0: state 7 ports 10 chg 0000 evt 0000
[ 5.984374] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.989513] mousedev: PS/2 mouse device common for all mice
[ 5.19] rtc_cmos 00:04: RTC can wake from S4
[ 6.000125] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 6.006247] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 6.013966] cpuidle: using governor ladder
[ 6.018071] cpuidle: using governor menu
[ 6.021987] EFI Variables Facility v0.08 2004-May-17
[ 6.027147] zram: Created 1 device(s) ...
[ 6.031371] Netfilter messages via NETLINK v0.30.
[ 6.036087] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6.042221] ctnetlink v0.93: registering with nfnetlink.
[ 6.047683] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.053032] TCP: cubic registered
[ 6.056353] Initializing XFRM netlink socket
[ 6.060646] NET: Registered protocol family 10
[ 6.065230] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.070733] sit: IPv6 over IPv4 tunneling driver
[ 6.075533] NET: Registered protocol family 17
[ 6.080005] Key type dns_resolver registered
[ 6.084528]
[ 6.084528] printing PIC contents
[ 6.089319] ... PIC IMR: ffff
[ 6.092369] ... PIC IRR: 0ca0
[ 6.095446] ... PIC ISR: 0000
[ 6.098497] ... PIC ELCR: 8ca0
[ 6.101551] printing local APIC contents on CPU#0/0:
[ 6.106508] ... APIC ID: 00000000 (0)
[ 6.110592] ... APIC VERSION: 80050010
[ 6.114332] ... APIC TASKPRI: 00000000 (00)
[ 6.118503] ... APIC ARBPRI: 000000e0 (e0)
[ 6.122589] ... APIC PROCPRI: 00000000
[ 6.126326] ... APIC LDR: 01000000
[ 6.129719] ... APIC DFR: ffffffff
[ 6.133113] ... APIC SPIV: 000001ff
[ 6.136591] ... APIC ISR field:
[ 6.139726] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.146890] ... APIC TMR field:
[ 6.150025] 0000000000000000000000000000000000000000000000000000000000000000
[ 6.157190] ... APIC IRR field:
[ 6.160323] 0000000000000000000000000000000000000000000000000000000000008000
[ 6.167490] ... APIC ESR: 00000000
[ 6.170882] ... APIC ICR: 000208fd
[ 6.174275] ... APIC ICR2: 02000000
[ 6.177753] ... APIC LVTT: 000000ef
[ 6.181235] ... APIC LVTPC: 00000400
[ 6.184799] ... APIC LVT0: 00010700
[ 6.188280] ... APIC LVT1: 00000400
[ 6.191758] ... APIC LVTERR: 000000fe
[ 6.195410] ... APIC TMICT: 00001965
[ 6.198976] ... APIC TMCCT: 00000000
[ 6.202543] ... APIC TDCR: 00000003
[ 6.206022] ... APIC EFEAT: 00040007
[ 6.209588] ... APIC ECTRL: 00000000
[ 6.213152] ... APIC EILVT0: 000000f9
[ 6.216806] ... APIC EILVT1: 00000400
[ 6.220458] ... APIC EILVT2: 00010000
[ 6.224110] ... APIC EILVT3: 00010000
[ 6.227762]
[ 6.229258] number of MP IRQ sources: 15.
[ 6.233262] number of IO-APIC #4 registers: 24.
[ 6.237788] testing the IO APIC.......................
[ 6.242932] IO APIC #4......
[ 6.245817] .... register #00: 00000000
[ 6.249650] ....... : physical APIC id: 00
[ 6.253997] ....... : Delivery Type: 0
[ 6.258003] ....... : LTS : 0
[ 6.262010] .... register #01: 00170011
[ 6.265844] ....... : max redirection entries: 17
[ 6.270890] ....... : PRQ implemented: 0
[ 6.275152] ....... : IO APIC version: 11
[ 6.279510] .... register #02: 00000000
[ 6.283346] ....... : arbitration: 00
[ 6.287353] .... IRQ redirection table:
[ 6.291191] 1 0 0 0 0 0 0 00
[ 6.295720] 0 0 0 0 0 1 1 31
[ 6.300247] 0 0 0 0 0 1 1 30
[ 6.304775] 0 0 0 0 0 1 1 33
[ 6.309299] 0 0 0 0 0 1 1 34
[ 6.313824] 1 0 0 0 0 1 1 35
[ 6.318353] 0 0 0 0 0 1 1 36
[ 6.322877] 1 0 0 0 0 1 1 37
[ 6.327408] 0 0 0 0 0 1 1 38
[ 6.331932] 0 1 0 0 0 1 1 39
[ 6.336459] 1 0 0 0 0 1 1 3A
[ 6.340984] 1 0 0 0 0 1 1 3B
[ 6.345513] 1 0 0 0 0 1 1 3C
[ 6.350036] 0 0 0 0 0 1 1 3D
[ 6.354565] 0 0 0 0 0 1 1 3E
[ 6.359089] 0 0 0 0 0 1 1 3F
[ 6.363618] 1 0 0 0 0 0 0 00
[ 6.368143] 1 0 0 0 0 0 0 00
[ 6.372672] 1 0 0 0 0 0 0 00
[ 6.377196] 1 0 0 0 0 0 0 00
[ 6.381722] 1 1 0 1 0 1 1 91
[ 6.386250] 0 1 0 1 0 1 1 51
[ 6.390778] 0 1 0 1 0 1 1 41
[ 6.395304] 1 0 0 0 0 0 0 00
[ 6.399831] IRQ to pin mappings:
[ 6.403061] IRQ0 -> 0:2
[ 6.405542] IRQ1 -> 0:1
[ 6.408036] IRQ3 -> 0:3
[ 6.410510] IRQ4 -> 0:4
[ 6.412987] IRQ5 -> 0:5
[ 6.415463] IRQ6 -> 0:6
[ 6.417954] IRQ7 -> 0:7
[ 6.420438] IRQ8 -> 0:8
[ 6.422931] IRQ9 -> 0:9
[ 6.425408] IRQ10 -> 0:10
[ 6.428063] IRQ11 -> 0:11
[ 6.430722] IRQ12 -> 0:12
[ 6.433386] IRQ13 -> 0:13
[ 6.436052] IRQ14 -> 0:14
[ 6.438719] IRQ15 -> 0:15
[ 6.441383] IRQ20 -> 0:20
[ 6.444050] IRQ21 -> 0:21
[ 6.446706] IRQ22 -> 0:22
[ 6.449373] .................................... done.
[ 6.454505] Using IPI No-Shortcut mode
[ 6.458443] PM: Hibernation image not present or could not be loaded.
[ 6.464892] registered taskstats version 1
[ 6.469471] Magic number: 5:68:710
[ 6.473207] zcache: using lzo compressor
[ 6.477169] zcache: cleancache enabled using kernel transcendent memory and compression buddies
[ 6.485847] zcache: cleancache: ignorenonactive = 1
[ 6.490719] zcache: frontswap enabled using kernel transcendent memory and compression buddies
[ 6.499305] zcache: frontswap: excl gets = 1 active only = 1
[ 6.505147] Freeing unused kernel memory: 544k freed
[ 6.510283] Write protecting the kernel text: 5764k
[ 6.515201] Write protecting the kernel read-only data: 1556k
[ 6.520936] NX-protecting the kernel data: 4476k
init started: BusyBox v1.14.3 ([ 6.527765] consoletype (1175) used greatest stack depth: 6860 bytes left
2013-03-03 18:36:49 EST)
Mounting directories [ OK ]
[ 6.542085] mv (1179) used greatest stack depth: 6752 bytes left
[ 6.616064] mv (1189) used greatest stack depth: 6576 bytes left
mount: mount point /proc/bus/usb does not exist
mount: mount point /proc/xen does not exist
mount: mount point /sys/kernel/conNo such file or directory
/usr/bin/load_xen_modu[ 6.659654] modprobe (1350) used greatest stack depth: 6488 bytes left
les: line 3: [: ==: unary operator expected
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 6.675659] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 6.681436] IOAPIC[0]: Set routing entry (4-16 -> 0xa1 -> IRQ 16 Mode:1 Active:1 Dest:3)
[ 6.689546] skge: 1.14 addr 0xfd8fc000 irq 16 chip Yukon rev 1
[ 6.699425] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.700000] skge 0000:01:08.0 eth1: addr 00:0a:5e:65:74:93
[ 6.700174] wmi: Mapper loaded
[ 6.714984] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.720795] modprobe (1441) used greatest stack depth: 5804 bytes left
[ 6.721112] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 6.721121] IOAPIC[0]: Set routing entry (4-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1 Dest:3)
[ 6.742544] SCSI subsystem initialized
[ 6.761104] ACPI: bus type scsi registered
[ 6.782983] nouveau 0000:00:0d.0: setting latency timer to 64
[ 6.788963] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ ^G[ 6.795716] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 6.795718] nouveau [ DEVICE][0000:00:0d.0] Chipset: VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 6.834790] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 6.834791] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 6.834929] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 6.834930] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.22.01
^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G^G[ 6.887478] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
^G^G^G^G^G[ 6.894308] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 6.901058] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 6.933757] nouveau [ PTHERM][0000:00:0d.0] FAN control: none / external
[ 6.940628] nouveau [ PTHERM][0000:00:0d.0] Thermal management: disabled
[ 6.957474] nouveau [ PTHERM][0000:00:0d.0] programmed thresholds [ 90(2), 95(3), 145(2), 135(5) ]
[ 6.966594] nouveau 6.975100] nouveau [ PTHERM][0000:00:0d.0] Thermal management: automatic
[ 6.982059] nouveau [ PTHERM][0000:00:0d.0] temperature (88 C) hit the 'downclock' threshold
[ 6.990680] nouveau [ PTHERM][0000:00:0d.0] temperature (88 C) hit the 'critical' threshold
[ 6.999194] nouveau [ PTHERM][0000:00:0d.0] temperature (90 C) hit the 'shutdown' threshold
[ 7.007711] hpet1: lost 1 rtc interrupts
^G^G^G^G^G^G^G^G[ 7.013194] [TTM] Zone kernel: Available graphics memory: 431220 kiB
^G^G^G^G^G^G^G^G[ 7.020985] [TTM] Zone highmem: Available graphics memory: 2005560 kiB
Usage: /etc/init[ 7.028895] [TTM] Initializing pool allocator
.d/halt {start}[ 7.034635] [TTM] Initializing DMA pool allocator
The system is [ 7.041068] nouveau [ DRM] VRAM: 125 MiB
going down NOW![ 7.046442] nouveau [ DRM] GART: 512 MiB
Sent SIGTERM t[ 7.052175] nouveau [ DRM] TMDS table version 1.1
o all processes[ 7.058683] nouveau [ DRM] DCB version 3.0
[ 7.064499] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 7.065252] libata version 3.00 loaded.
[ 7.074156] nouveau [ DRM] DCB outp 01: 00110204 97e50000
[ 7.074158] nouveau [ DRM] DCB conn 00: 0000
[ 7.074284] nouveau [ DRM] Saving VGA fonts
udevd-work[1396]: '/sbin/modprobe -b pci:v000010DEd000003F6sv00001565sd00005405bc01sc01i85' unexpected exit with status 0x000f
udevd-work[1343]: '/sbin/modprobe -b pci:v000[ 7.103550] e1000 0000:01:06.0 eth2: (PCI:66MHz:32-bit) 00:04:23:a7:5a:01
010DEd000003F6sv[ 7.111633] e1000 0000:01:06.0 eth2: Intel(R) PRO/1000 Network Connection
00001565sd000054[ 7.119940] modprobe (1431) used greatest stack depth: 5748 bytes left
05bc01sc01i85' unexpected exit with status 0x000f
udevd-work[1328]: '/sbin/m[ 7.133729] nouveau W[ DRM] DCB type 4 not known
odprobe -b pci:v[ 7.139812] nouveau W[ DRM] Unknown-1 has no encoders, removing
000010DEd000003E[ 7.148157] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Csv00001565sd000[ 7.155297] [drm] No driver support for vblank timestamp query.
03407bc01sc01i8a[ 7.163011] nouveau [ DRM] 1 available performance level(s)
' unexpected exi[ 7.169916] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
t with status 0x[ 7.178154] nouveau [ DRM] c:
000f
udevd-work[1344]: '/sbi[ 7.184291] nouveau [ DRM] MM: using M2MF for buffer copies
n/modprobe -b pci:v00008086d00001026sv00008086sd00001001bc02sc00i00' unexpected exit with status 0x000f
[ 7.225592] nouveau 0000:00:0d.0: No connectors reported connected with modes
[ 7.232730] [drm] Cannot find any crtc or smary device
[ 7.250046] Console: switching to colour frame buffer device 128x48
[ 7.262237] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 7.268581] nouveau 0000:00:0d.0: registered panic notifier
[ 7.274141] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
^G^G^G^G^G^G^G^G[ 7.281828] modprobe (1458) used greatest stack depth: 5640 bytes left
^G^G^G^G^G^G^G^G^G^G^G^Gudevd-work[1298]: '/sbin/modprobe -b pci:v000010DEd000003D0sv00001565sd00001405bc03sc00i00' unexpected exit with status 0x000f
Sent SIGKILL to all processes
Requesting system poweroff
[ 9.063560] pci 0000:00:04.0: System wakeup enabled by ACPI
[ 9.102275] ACPI: Preparing to enter system sleep state S5
[ 9.108294] Disabling non-boot CPUs ...
[ 9.113600] Power
Hi Konrad,
On 04/03/2013 19:40, Konrad Rzeszutek Wilk wrote:> After git merge
ab7826595e9ec51a51f622c5fc91e2f59440481a
> (Merge tag 'mfd-3.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6)
> the nouveau driver ends up shutting of the machine when booting.
>
>
> I hadn't done a git bisection yet and was wondering if there are some
> juice commits I ought to look at?
Sure, no need to bisect, it is a new (apparently-broken-for-you) feature.
The code is in /drivers/gpu/drm/nouveau/core/subdev/therm/
>
> Here is the serial console:
> [ 6.940628] nouveau [ PTHERM][0000:00:0d.0] Thermal management:
disabled
> [ 6.957474] nouveau [ PTHERM][0000:00:0d.0] programmed
thresholds [ 90(2), 95(3), 145(2), 135(5) ]
> [ 6.966594] nouveau 6.975100] nouveau [
PTHERM][0000:00:0d.0] Thermal management: automatic
> [ 6.982059] nouveau [ PTHERM][0000:00:0d.0] temperature (88 C)
hit the 'downclock' threshold
> [ 6.990680] nouveau [ PTHERM][0000:00:0d.0] temperature (88 C)
hit the 'critical' threshold
> [ 6.999194] nouveau [ PTHERM][0000:00:0d.0] temperature (90 C)
hit the 'shutdown' threshold
See, this is strange. If I believe the "programmed thresholds" line, the
fanboost threshold is at 90?C, downclock is at 95?C, critical
temperature is at 145?C and shutdown is at 135?C.
So, from the BIOS side, things seem to be in fairly good shape (critical
should be lower than shutdown, but that's OK).
My theory is that your temperature sensor is very variable that would
set off the shutdown alarm. So, either the sensor needs more settling
time or the output is genuinely very variable.
In the first case, we could fix that by increasing the settling time (at
the expense of a longer boot period). We could also for a 10s wait at
boot time before reading temperature.
If this is the latter case, we only have the solution to average the
temperature on several samples. I would need statistics on the
variability in order to calculate a proper low-pass filter that wouldn't
be too slow or too RAM/wakeup-intensive.
I really hope the problem is the settling time!
Here is what you can do to test the theory:
Change the mdelay at line 41 of
/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c
(http://cgit.freedesktop.org/nouveau/linux-2.6/tree/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c#n41)
from 10 to 1000.
Please also add an mdelay of 1000 between lines 44 and 45.
If it works with this patch, then try decreasing the delay to 20ms.
In any way, I'll send some thermal patches tonight to be more resistant
to long settling times.
Thanks for reporting!
Martin (mupuf)
On Mon, Mar 04, 2013 at 08:21:48PM +0100, Martin Peres wrote:
> Hi Konrad,
>
> On 04/03/2013 19:40, Konrad Rzeszutek Wilk wrote:> After git merge
> ab7826595e9ec51a51f622c5fc91e2f59440481a
> > (Merge tag 'mfd-3.9-1' of
> git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6)
> > the nouveau driver ends up shutting of the machine when booting.
> >
> >
> > I hadn't done a git bisection yet and was wondering if there are some
> > juice commits I ought to look at?
>
> Sure, no need to bisect, it is a new (apparently-broken-for-you) feature.
>
> The code is in /drivers/gpu/drm/nouveau/core/subdev/therm/
>
>
> >
> > Here is the serial console:
>
>
> > [ 6.940628] nouveau [ PTHERM][0000:00:0d.0] Thermal
> management: disabled
> > [ 6.957474] nouveau [ PTHERM][0000:00:0d.0] programmed
> thresholds [ 90(2), 95(3), 145(2), 135(5) ]
> > [ 6.966594] nouveau 6.975100] nouveau [
> PTHERM][0000:00:0d.0] Thermal management: automatic
> > [ 6.982059] nouveau [ PTHERM][0000:00:0d.0] temperature (88
> C) hit the 'downclock' threshold
> > [ 6.990680] nouveau [ PTHERM][0000:00:0d.0] temperature (88
> C) hit the 'critical' threshold
> > [ 6.999194] nouveau [ PTHERM][0000:00:0d.0] temperature (90
> C) hit the 'shutdown' threshold
>
> See, this is strange. If I believe the "programmed thresholds" line,
> the fanboost threshold is at 90?C, downclock is at 95?C, critical
> temperature is at 145?C and shutdown is at 135?C.
> So, from the BIOS side, things seem to be in fairly good shape
> (critical should be lower than shutdown, but that's OK).
>
> My theory is that your temperature sensor is very variable that
> would set off the shutdown alarm. So, either the sensor needs more
> settling time or the output is genuinely very variable.
You should see it when I boot it under Xen:
[ 8.427789] nouveau [ PTHERM][0000:00:0d.0] programmed thresholds [ 90(2), 95(3), 145(2), 135(5) ]^M^M
[ 8.427855] nouveau [ PTHERM][0000:00:0d.0] temperature (222 C) hit the 'fanboost' threshold^M^M
[ 8.427919] nouveau [ PTHERM][0000:00:0d.0] Thermal management: automatic^M^M
[ 8.427973] nouveau [ PTHERM][0000:00:0d.0] temperature (222 C) hit the 'downclock' threshold^M^M
[ 8.428036] nouveau [ PTHERM][0000:00:0d.0] temperature (222 C) hit the 'critical' threshold^M^M
[ 8.428099] nouveau [ PTHERM][0000:00:0d.0] temperature (222 C) hit the 'shutdown' threshold^M^M
>
> In the first case, we could fix that by increasing the settling time
> (at the expense of a longer boot period). We could also for a 10s
> wait at boot time before reading temperature.
> If this is the latter case, we only have the solution to average the
> temperature on several samples. I would need statistics on the
> variability in order to calculate a proper low-pass filter that
> wouldn't be too slow or too RAM/wakeup-intensive.
>
> I really hope the problem is the settling time!
>
>
> Here is what you can do to test the theory:
>
> Change the mdelay at line 41 of
> /drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c (http://cgit.freedesktop.org/nouveau/linux-2.6/tree/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c#n41)
> from 10 to 1000.
> Please also add an mdelay of 1000 between lines 44 and 45.
Let me do that tomorrow and report my findings.
>
> If it works with this patch, then try decreasing the delay to 20ms.
>
> In any way, I'll send some thermal patches tonight to be more
> resistant to long settling times.
Pls CC me in case you would like me also to test them with the
mdelay patch.
>
> Thanks for reporting!
Of course.
>
> Martin (mupuf)
>
>
> With that I am still getting the issues (even with an insance delay of 100 seconds).
> Here is the serial log with various runs.
Any thoughts?
> [ 13.523878] initcall init_sg+0x0/0x1000 [sg] returned 0 after 5355 usecs
> ^G^G[ 13.621376] nouveau [ PTHERM][0000:00:0d.0] programmed thresholds [ 90(2), 95(3), 145(2), 135(5) ]
> [ 13.630487] nouveau 39079] nouveau [ PTHERM][0000:00:0d.0] Thermal management: automatic
> [ 13.646028] nouveau [ PTHERM][0000:00:0d.0] temperature (218 C) hit the 'downclock' threshold
> [ 13.654702] nouveau [ PTHERM][0000:00:0d.0] temperature (218 C) hit the 'critical' threshold
> [ 13.663296] nouveau [ PTHERM][0000:00:0d.0] temperature (218 C) hit the 'shutdown' threshold
> [ 13.671992] [TTM] Zone kernel: Available graphics memory: 1963774 kiB
Perhaps I've some insanely stupid BIOS?
On 11/03/2013 13:38, Konrad Rzeszutek Wilk wrote:
>> With that I am still getting the issues (even with an insance delay of 100 seconds).
>> Here is the serial log with various runs.
> Any thoughts?
Sorry for taking so long to answer but I got a one-week flu and still
had to do my research duties :s
Anyway, as a matter of fact, I do have some thoughts. If you don't mind,
the tests I would like you to make will be listed at the end of the message.
>> [ 13.523878] initcall init_sg+0x0/0x1000 [sg] returned 0 after 5355 usecs
>> ^G^G[ 13.621376] nouveau [ PTHERM][0000:00:0d.0] programmed thresholds [ 90(2), 95(3), 145(2), 135(5) ]
>> [ 13.630487] nouveau 39079] nouveau [ PTHERM][0000:00:0d.0] Thermal management: automatic
>> [ 13.646028] nouveau [ PTHERM][0000:00:0d.0] temperature (218 C) hit the 'downclock' threshold
>> [ 13.654702] nouveau [ PTHERM][0000:00:0d.0] temperature (218 C) hit the 'critical' threshold
>> [ 13.663296] nouveau [ PTHERM][0000:00:0d.0] temperature (218 C) hit the 'shutdown' threshold
>> [ 13.671992] [TTM] Zone kernel: Available graphics memory: 1963774 kiB
> Perhaps I've some insanely stupid BIOS?
So, first of all, I indeed would like to see your vbios and I also would
like to know the bitfield of some regs.
The easiest way to do both is to grab and compile the envytools[0].
To grab your vbios, please do the following:
nvagetbios > nv4c_vbios.rom
To get the bitfield of the thermal-related regs:
nvascan 15b0 10 > nv4c_therm_scan
Please send me both of these files and I'll see what I can do.
Sorry again for the very late answer (I'm slowly getting better).
Martin
[0] https://github.com/pathscale/envytools