From: Matt Porter <[email protected]>
Adds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Also added is the DMA binding definitions based on the generic DMA
request binding.
The HWMOD data removal was breaking MMC so some new properties like reg,
interrupt etc were added.
Changes to DTS:
Interrupt and reg added by: Joel Fernandes <[email protected]>
Compatible added by Balaji TK <[email protected]>
ti,needs-special-hs-handling added by Gururaja Hebbar <[email protected]>
Signed-off-by: Matt Porter <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Joel Fernandes <[email protected]>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 26 +++++++++++++-
arch/arm/boot/dts/am335x-bone.dts | 7 ++++
arch/arm/boot/dts/am335x-evm.dts | 7 ++++
arch/arm/boot/dts/am335x-evmsk.dts | 7 ++++
arch/arm/boot/dts/am33xx.dtsi | 38 ++++++++++++++++++++
5 files changed, 84 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index ed271fc..8c8908a 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual voltage cards
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+dmas: List of DMA specifiers with the controller specific format
+as described in the generic DMA client binding. A tx and rx
+specifier is required.
+dma-names: List of DMA request names. These strings correspond
+1:1 with the DMA specifiers listed in dmas. The string naming is
+to be "rx" and "tx" for RX and TX DMA requests, respectively.
+
+Examples:
+
+[hwmod populated DMA resources]
+
+ mmc1: mmc@0x4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ };
+
+[generic DMA request binding]
-Example:
mmc1: mmc@0x4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
@@ -30,4 +51,7 @@ Example:
bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 5302f79..80bff9c 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -120,6 +120,8 @@
};
ldo3_reg: regulator@5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -136,3 +138,8 @@
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&ldo3_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 0423298..62af561 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -232,6 +232,8 @@
};
vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
@@ -244,3 +246,8 @@
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index f67c360..8904b88 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -244,7 +244,14 @@
};
vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index b4fda12..8ab566f 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -229,6 +229,44 @@
status = "disabled";
};
+ mmc1: mmc@48060000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ ti,needs-special-hs-handling;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
+ interrupts = <64>;
+ interrupt-parent = <&intc>;
+ reg = <0x48060000 0x1000>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@481d8000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ dmas = <&edma 2
+ &edma 3>;
+ dma-names = "tx", "rx";
+ interrupts = <28>;
+ interrupt-parent = <&intc>;
+ reg = <0x481d8000 0x1000>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@47810000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ interrupts = <29>;
+ interrupt-parent = <&intc>;
+ reg = <0x47810000 0x1000>;
+ status = "disabled";
+ };
+
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
--
1.7.9.5
On 27/06/13 04:32, Joel Fernandes wrote:
> From: Matt Porter <[email protected]>
>
> Adds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
> Also added is the DMA binding definitions based on the generic DMA
> request binding.
>
> The HWMOD data removal was breaking MMC so some new properties like reg,
> interrupt etc were added.
>
> Changes to DTS:
> Interrupt and reg added by: Joel Fernandes <[email protected]>
> Compatible added by Balaji TK <[email protected]>
> ti,needs-special-hs-handling added by Gururaja Hebbar <[email protected]>
>
> Signed-off-by: Matt Porter <[email protected]>
> Acked-by: Tony Lindgren <[email protected]>
> Signed-off-by: Joel Fernandes <[email protected]>
> ---
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 26 +++++++++++++-
> arch/arm/boot/dts/am335x-bone.dts | 7 ++++
> arch/arm/boot/dts/am335x-evm.dts | 7 ++++
> arch/arm/boot/dts/am335x-evmsk.dts | 7 ++++
> arch/arm/boot/dts/am33xx.dtsi | 38 ++++++++++++++++++++
> 5 files changed, 84 insertions(+), 1 deletion(-)
Excuse my ignorance, but which git repository is this against ?