On Thursday, July 25, 2013 10:45 PM, Michal Simek wrote:
>
> regs_phys is phys_addr_t (u32 or u64).
> Lets use %pa printk format specifier.
>
> Fixes compilation warning introduced by:
> video: xilinxfb: Use drvdata->regs_phys instead of physaddr
> (sha1: c88fafef0135e1e1c3e23c3e32ccbeeabc587f81)
>
> Signed-off-by: Michal Simek <[email protected]>
It looks good.
Reviewed-by: Jingoo Han <[email protected]>
Best regards,
Jingoo Han
> ---
> Changes in v3:
> - Fix commit message reported by Geert
>
> Changes in v2:
> - Use %pa instead of casting
>
> ppc44x_defconfig
> Fixes regressions in v3.11-rc2
>
> ---
> drivers/video/xilinxfb.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index f3d4a69..6629b29 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -341,8 +341,8 @@ static int xilinxfb_assign(struct platform_device *pdev,
>
> if (drvdata->flags & BUS_ACCESS_FLAG) {
> /* Put a banner in the log (for DEBUG) */
> - dev_dbg(dev, "regs: phys=%x, virt=%p\n", drvdata->regs_phys,
> - drvdata->regs);
> + dev_dbg(dev, "regs: phys=%pa, virt=%p\n",
> + &drvdata->regs_phys, drvdata->regs);
> }
> /* Put a banner in the log (for DEBUG) */
> dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
> --
> 1.8.2.3
>
On 25/07/13 16:45, Michal Simek wrote:
> regs_phys is phys_addr_t (u32 or u64).
> Lets use %pa printk format specifier.
>
> Fixes compilation warning introduced by:
> video: xilinxfb: Use drvdata->regs_phys instead of physaddr
> (sha1: c88fafef0135e1e1c3e23c3e32ccbeeabc587f81)
>
> Signed-off-by: Michal Simek <[email protected]>
> ---
> Changes in v3:
> - Fix commit message reported by Geert
>
> Changes in v2:
> - Use %pa instead of casting
>
> ppc44x_defconfig
> Fixes regressions in v3.11-rc2
>
> ---
> drivers/video/xilinxfb.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
> index f3d4a69..6629b29 100644
> --- a/drivers/video/xilinxfb.c
> +++ b/drivers/video/xilinxfb.c
> @@ -341,8 +341,8 @@ static int xilinxfb_assign(struct platform_device *pdev,
>
> if (drvdata->flags & BUS_ACCESS_FLAG) {
> /* Put a banner in the log (for DEBUG) */
> - dev_dbg(dev, "regs: phys=%x, virt=%p\n", drvdata->regs_phys,
> - drvdata->regs);
> + dev_dbg(dev, "regs: phys=%pa, virt=%p\n",
> + &drvdata->regs_phys, drvdata->regs);
> }
> /* Put a banner in the log (for DEBUG) */
> dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
> --
> 1.8.2.3
>
Thanks, I've applied this into my 3.12/fbdev branch.
Tomi
On 26/07/13 10:33, Tomi Valkeinen wrote:
> On 25/07/13 16:45, Michal Simek wrote:
>> regs_phys is phys_addr_t (u32 or u64).
>> Lets use %pa printk format specifier.
>>
>> Fixes compilation warning introduced by:
>> video: xilinxfb: Use drvdata->regs_phys instead of physaddr
>> (sha1: c88fafef0135e1e1c3e23c3e32ccbeeabc587f81)
>>
>> Signed-off-by: Michal Simek <[email protected]>
> Thanks, I've applied this into my 3.12/fbdev branch.
Actually, let's put this into 3.11-fixes/fbdev branch.
Tomi
On 07/26/2013 09:35 AM, Tomi Valkeinen wrote:
> On 26/07/13 10:33, Tomi Valkeinen wrote:
>> On 25/07/13 16:45, Michal Simek wrote:
>>> regs_phys is phys_addr_t (u32 or u64).
>>> Lets use %pa printk format specifier.
>>>
>>> Fixes compilation warning introduced by:
>>> video: xilinxfb: Use drvdata->regs_phys instead of physaddr
>>> (sha1: c88fafef0135e1e1c3e23c3e32ccbeeabc587f81)
>>>
>>> Signed-off-by: Michal Simek <[email protected]>
>
>> Thanks, I've applied this into my 3.12/fbdev branch.
>
> Actually, let's put this into 3.11-fixes/fbdev branch.
>
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: http://www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform