request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <[email protected]>
---
Hi sub-arch maintainers,
If the patch is okay, please take it thr' your tree.
Regards
afzal
v3:
* Split out from series, also create subarch level patch as Thomas
suggested to take it thr' respective maintainers
* Modify string displayed in case of error as suggested by Thomas
* Re-arrange code as required to improve readability
* Remove irrelevant parts from commit message & improve
v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage
arch/arm/mach-ep93xx/timer-ep93xx.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..dd4b164d1831 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction ep93xx_timer_irq = {
- .name = "ep93xx timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ep93xx_timer_interrupt,
- .dev_id = &ep93xx_clockevent,
-};
-
void __init ep93xx_timer_init(void)
{
+ int irq = IRQ_EP93XX_TIMER3;
+ unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
/* Enable and register clocksource and sched_clock on timer 4 */
writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
EP93XX_TIMER4_VALUE_HIGH);
@@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
EP93XX_TIMER4_RATE);
/* Set up clockevent on timer 3 */
- setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+ if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+ &ep93xx_clockevent))
+ pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
clockevents_config_and_register(&ep93xx_clockevent,
EP93XX_TIMER123_RATE,
1,
--
2.25.1
Hi Afzal, Arnd,
as there is no dedicated tree for EP93xx, could you please
consider the below patch for your arm-soc tree?
On 01/03/2020 13:21, afzal mohammed wrote:
> request_irq() is preferred over setup_irq(). Invocations of setup_irq()
> occur after memory allocators are ready.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <[email protected]>
Acked-by: Alexander Sverdlin <[email protected]>
> ---
> Hi sub-arch maintainers,
>
> If the patch is okay, please take it thr' your tree.
>
> Regards
> afzal
>
> v3:
> * Split out from series, also create subarch level patch as Thomas
> suggested to take it thr' respective maintainers
> * Modify string displayed in case of error as suggested by Thomas
> * Re-arrange code as required to improve readability
> * Remove irrelevant parts from commit message & improve
>
> v2:
> * Replace pr_err("request_irq() on %s failed" by
> pr_err("%s: request_irq() failed"
> * Commit message massage
>
> arch/arm/mach-ep93xx/timer-ep93xx.c | 14 ++++++--------
> 1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
> index de998830f534..dd4b164d1831 100644
> --- a/arch/arm/mach-ep93xx/timer-ep93xx.c
> +++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
> @@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static struct irqaction ep93xx_timer_irq = {
> - .name = "ep93xx timer",
> - .flags = IRQF_TIMER | IRQF_IRQPOLL,
> - .handler = ep93xx_timer_interrupt,
> - .dev_id = &ep93xx_clockevent,
> -};
> -
> void __init ep93xx_timer_init(void)
> {
> + int irq = IRQ_EP93XX_TIMER3;
> + unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
> +
> /* Enable and register clocksource and sched_clock on timer 4 */
> writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
> EP93XX_TIMER4_VALUE_HIGH);
> @@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
> EP93XX_TIMER4_RATE);
>
> /* Set up clockevent on timer 3 */
> - setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
> + if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
> + &ep93xx_clockevent))
> + pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
> clockevents_config_and_register(&ep93xx_clockevent,
> EP93XX_TIMER123_RATE,
> 1,
>