Added pramfs documentation.
Signed-off-by: Marco Stornelli <[email protected]>
---
Documentation/filesystems/pramfs.txt | 177 ++++++++++++++++++++++++++++++++++
Documentation/filesystems/xip.txt | 2 +
MAINTAINERS | 9 ++
3 files changed, 188 insertions(+), 0 deletions(-)
create mode 100644 Documentation/filesystems/pramfs.txt
diff --git a/Documentation/filesystems/pramfs.txt b/Documentation/filesystems/pramfs.txt
new file mode 100644
index 0000000..a61d7a0
--- /dev/null
+++ b/Documentation/filesystems/pramfs.txt
@@ -0,0 +1,177 @@
+
+PRAMFS Overview
+===============
+
+Many embedded systems have a block of non-volatile RAM separate from
+normal system memory, i.e. of which the kernel maintains no memory page
+descriptors. For such systems it would be beneficial to mount a
+fast read/write filesystem over this "I/O memory", for storing frequently
+accessed data that must survive system reboots and power cycles or volatile
+data avoiding to write on a disk or flash. An example usage might be system
+logs under /var/log or debug information of a flight-recorder.
+
+Linux traditionally had no support for a persistent, non-volatile RAM-based
+filesystem, persistent meaning the filesystem survives a system reboot
+or power cycle intact. The RAM-based filesystems such as tmpfs and ramfs
+have no actual backing store but exist entirely in the page and buffer
+caches, hence the filesystem disappears after a system reboot or
+power cycle.
+
+A relatively straightforward solution is to write a simple block driver
+for the non-volatile RAM, and mount over it any disk-based filesystem such
+as ext2, ext3, ext4, etc.
+
+But the disk-based fs over non-volatile RAM block driver approach has
+some drawbacks:
+
+1. Complexity of disk-based fs: disk-based filesystems such as ext2/ext3/ext4
+ were designed for optimum performance on spinning disk media, so they
+ implement features such as block groups, which attempts to group inode data
+ into a contiguous set of data blocks to minimize disk seeking when accessing
+ files. For RAM there is no such concern; a file's data blocks can be
+ scattered throughout the media with no access speed penalty at all. So block
+ groups in a filesystem mounted over RAM just adds unnecessary
+ complexity. A better approach is to use a filesystem specifically
+ tailored to RAM media which does away with these disk-based features.
+ This increases the efficient use of space on the media, i.e. more
+ space is dedicated to actual file data storage and less to meta-data
+ needed to maintain that file data.
+
+2. Different problems between disks and RAM: Because PRAMFS attempts to avoid
+ filesystem corruption caused by kernel bugs, dirty pages in the page cache
+ are not allowed to be written back to the backing-store RAM. This way, an
+ errant write into the page cache will not get written back to the filesystem.
+ However, if the backing-store RAM is comparable in access speed to system
+ memory, the penalty of not using caching is minimal. With this consideration
+ it's better to move file data directly between the user buffers and the backing
+ store RAM, i.e. use direct I/O. This prevents the unnecessary populating of
+ the page cache with dirty pages. However direct I/O has to be enabled at
+ every file open. To enable direct I/O at all times for all regular files
+ requires either that applications be modified to include the O_DIRECT flag on
+ all file opens, or that the filesystem used performs direct I/O by default.
+
+The Persistent/Protected RAM Special Filesystem (PRAMFS) is a read/write
+filesystem that has been designed to address these issues. PRAMFS is targeted
+to fast I/O memory, and if the memory is non-volatile, the filesystem will be
+persistent.
+
+In PRAMFS, direct I/O is enabled across all files in the filesystem, in other
+words the O_DIRECT flag is forced on every open of a PRAMFS file. Also, file
+I/O in the PRAMFS is always synchronous. There is no need to block the current
+process while the transfer to/from the PRAMFS is in progress, since one of
+the requirements of the PRAMFS is that the filesystem exists in fast RAM. So
+file I/O in PRAMFS is always direct, synchronous, and never blocks.
+
+PRAMFS supports the execute-in-place. With Xip, instead of doing
+memory-to-memory copies to transfer data from/to user space from/to kernel
+space, read&write operations are performed directly from/to the memory. For
+file mappings, the RAM itself is mapped directly into userspace. Xip,
+in addition, speed-up the applications start-up time because it removes the
+needs of any copies.
+
+PRAMFS is write protected. The page table entries that map the backing-store
+RAM are normally marked read-only. Write operations into the filesystem
+temporarily mark the affected pages as writeable, the write operation is
+carried out with locks held, and then the page table entries is
+marked read-only again.
+This feature provides protection against filesystem corruption caused by errant
+writes into the RAM due to kernel bugs for instance. In case there are systems
+where the write protection is not possible (for instance the RAM cannot be
+mapped with page tables), this feature can be disabled via the
+CONFIG_PRAMFS_WRITE_PROTECT config option and at mount time.
+
+PRAMFS supports extended attributes, ACLs, security labels, freezeing, the
+new lseek options SEEK_DATA/SEEK_HOLE and file pre-allocation (fallocate).
+
+In summary, PRAMFS is a light-weight special filesystem that is ideal for
+systems with a block of fast non-volatile RAM that need to access data on it
+using a standard filesytem interface.
+
+Supported mount options
+=======================
+
+The PRAMFS currently requires one mount option, and there are several
+optional mount options:
+
+physaddr= Required. It tells PRAMFS the physical address of the
+ start of the RAM that makes up the filesystem. The
+ physical address must be located on a page boundary.
+
+init= Optional. It is used to initialize the memory to an
+ empty filesystem. Any data in an existing filesystem
+ will be lost if this option is given. The parameter to
+ "init=" is the RAM in kilo/mega/giga bytes.
+
+bs= Optional. It is used to specify a block size. It is
+ ignored if the "init=" option is not specified, since
+ otherwise the block size is read from the PRAMFS
+ super-block. The default blocksize is 2048 bytes,
+ and the allowed block sizes are 512, 1024, 2048, and
+ 4096.
+
+bpi= Optional. It is used to specify the bytes per inode
+ ratio, i.e. for every N bytes in the filesystem, an
+ inode will be created. This behaves the same as the "-i"
+ option to mke2fs. It is ignored if the "init=" option is
+ not specified.
+
+N= Optional. It is used to specify the number of inodes to
+ allocate in the inode table. If the option is not
+ specified, the bytes-per-inode ratio is used to
+ calculate the number of inodes. If neither the "N=" or
+ "bpi=" options are specified, the default behavior is to
+ reserve 5% of the total space in the filesystem for the
+ inode table. This option behaves the same as the "-N"
+ option to mke2fs. It is ignored if the "init=" option is
+ not specified.
+
+errors= Optional. It can be "cont", "remount-ro" and "panic". With the
+ first value no action is done in case of error. With the second
+ one the fs is mounted read-only. with the third one a kernel
+ panic happens. Default action is to continue on error.
+
+acl,noacl Optional. Enable/disable the support for access control lists
+ (disabled by default).
+
+user_xattr, Optional. Enable/disable the support for the user extended
+user_noxattr attributes (disabled by default).
+
+noprotect Optional. Disable the memory protection (enabled by default).
+
+xip Optional. Enable the execute-in-place (disabled by default).
+
+Examples:
+
+mount -t pramfs -o physaddr=0x20000000,init=1M,bs=1k none /mnt/pram
+
+This example locates the filesystem at physical address 0x20000000, and
+also requests an empty filesystem be initialized, of total size of one
+megabyte and blocksize of one kilobyte. The mount point is /mnt/pram.
+
+mount -t pramfs -o physaddr=0x20000000 none /mnt/pram
+
+This example locates the filesystem at physical address 0x20000000 as in
+the first example, but uses the intact filesystem that already exists.
+
+Current Limitations
+===================
+
+- The RAM used for PRAMFS must be directly addressable.
+
+- PRAMFS does not support hard links.
+
+- PRAMFS supports only private memory mappings. This allows most
+ executables to run, but programs that attempt shared memory
+ mappings, such as X apps that use X shared memory, will fail.
+
+- PRAMFS does not support quota settings.
+
+Further Documentation
+=====================
+
+If you are interested in the internal design of PRAMFS, there is
+documentation available at the Sourceforge PRAMFS home page at
+http://pramfs.sourceforge.net/.
+
+Please send bug reports/comments/feedback to the pramfs development
+list at sourceforge: [email protected].
diff --git a/Documentation/filesystems/xip.txt b/Documentation/filesystems/xip.txt
index 0466ee5..b184892 100644
--- a/Documentation/filesystems/xip.txt
+++ b/Documentation/filesystems/xip.txt
@@ -48,6 +48,8 @@ blocks if needed.
This address space operation is mutually exclusive with readpage&writepage that
do page cache read/write operations.
The following filesystems support it as of today:
+- pramfs: persistent and protected RAM filesystem, see
+ Documentation/filesystems/pramfs.txt
- ext2: the second extended filesystem, see Documentation/filesystems/ext2.txt
A set of file operations that do utilize get_xip_page can be found in
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d8ab7c..1b74bf8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6548,6 +6548,15 @@ S: Maintained
F: drivers/net/ppp/pptp.c
W: http://sourceforge.net/projects/accel-pptp
+PRAM FILE SYSTEM
+M: Marco Stornelli <[email protected]>
+W: http://pramfs.sourceforge.net
+L: [email protected] (subscribers-only)
+S: Maintained
+F: Documentation/filesystems/pramfs.txt
+F: fs/pramfs/
+F: include/linux/pram*
+
PREEMPTIBLE KERNEL
M: Robert Love <[email protected]>
L: [email protected]
--
1.7.3.4
On 09/07/13 01:15, Marco Stornelli wrote:
> Added pramfs documentation.
>
> Signed-off-by: Marco Stornelli <[email protected]>
> ---
> Documentation/filesystems/pramfs.txt | 177 ++++++++++++++++++++++++++++++++++
> Documentation/filesystems/xip.txt | 2 +
> MAINTAINERS | 9 ++
> 3 files changed, 188 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/filesystems/pramfs.txt
>
> diff --git a/Documentation/filesystems/pramfs.txt b/Documentation/filesystems/pramfs.txt
> new file mode 100644
> index 0000000..a61d7a0
> --- /dev/null
> +++ b/Documentation/filesystems/pramfs.txt
> @@ -0,0 +1,177 @@
> +
> +PRAMFS Overview
> +===============
> +
> +Many embedded systems have a block of non-volatile RAM separate from
> +normal system memory, i.e. of which the kernel maintains no memory page
> +descriptors. For such systems it would be beneficial to mount a
> +fast read/write filesystem over this "I/O memory", for storing frequently
> +accessed data that must survive system reboots and power cycles or volatile
> +data avoiding to write on a disk or flash. An example usage might be system
> +logs under /var/log or debug information of a flight-recorder.
> +
> +Linux traditionally had no support for a persistent, non-volatile RAM-based
> +filesystem, persistent meaning the filesystem survives a system reboot
Persistent
> +or power cycle intact. The RAM-based filesystems such as tmpfs and ramfs
> +have no actual backing store but exist entirely in the page and buffer
> +caches, hence the filesystem disappears after a system reboot or
Hence
> +power cycle.
> +
> +A relatively straightforward solution is to write a simple block driver
> +for the non-volatile RAM, and mount over it any disk-based filesystem such
> +as ext2, ext3, ext4, etc.
> +
> +But the disk-based fs over non-volatile RAM block driver approach has
> +some drawbacks:
> +
> +1. Complexity of disk-based fs: disk-based filesystems such as ext2/ext3/ext4
> + were designed for optimum performance on spinning disk media, so they
> + implement features such as block groups, which attempts to group inode data
> + into a contiguous set of data blocks to minimize disk seeking when accessing
> + files. For RAM there is no such concern; a file's data blocks can be
> + scattered throughout the media with no access speed penalty at all. So block
> + groups in a filesystem mounted over RAM just adds unnecessary
> + complexity. A better approach is to use a filesystem specifically
> + tailored to RAM media which does away with these disk-based features.
> + This increases the efficient use of space on the media, i.e. more
> + space is dedicated to actual file data storage and less to meta-data
> + needed to maintain that file data.
> +
> +2. Different problems between disks and RAM: Because PRAMFS attempts to avoid
> + filesystem corruption caused by kernel bugs, dirty pages in the page cache
> + are not allowed to be written back to the backing-store RAM. This way, an
> + errant write into the page cache will not get written back to the filesystem.
> + However, if the backing-store RAM is comparable in access speed to system
> + memory, the penalty of not using caching is minimal. With this consideration
> + it's better to move file data directly between the user buffers and the backing
> + store RAM, i.e. use direct I/O. This prevents the unnecessary populating of
> + the page cache with dirty pages. However direct I/O has to be enabled at
> + every file open. To enable direct I/O at all times for all regular files
> + requires either that applications be modified to include the O_DIRECT flag on
> + all file opens, or that the filesystem used performs direct I/O by default.
> +
> +The Persistent/Protected RAM Special Filesystem (PRAMFS) is a read/write
> +filesystem that has been designed to address these issues. PRAMFS is targeted
> +to fast I/O memory, and if the memory is non-volatile, the filesystem will be
> +persistent.
> +
> +In PRAMFS, direct I/O is enabled across all files in the filesystem, in other
> +words the O_DIRECT flag is forced on every open of a PRAMFS file. Also, file
> +I/O in the PRAMFS is always synchronous. There is no need to block the current
> +process while the transfer to/from the PRAMFS is in progress, since one of
> +the requirements of the PRAMFS is that the filesystem exists in fast RAM. So
> +file I/O in PRAMFS is always direct, synchronous, and never blocks.
> +
> +PRAMFS supports the execute-in-place. With Xip, instead of doing
> +memory-to-memory copies to transfer data from/to user space from/to kernel
> +space, read&write operations are performed directly from/to the memory. For
read & write
> +file mappings, the RAM itself is mapped directly into userspace. Xip,
> +in addition, speed-up the applications start-up time because it removes the
speeds up
> +needs of any copies.
> +
> +PRAMFS is write protected. The page table entries that map the backing-store
> +RAM are normally marked read-only. Write operations into the filesystem
> +temporarily mark the affected pages as writeable, the write operation is
> +carried out with locks held, and then the page table entries is
are
> +marked read-only again.
> +This feature provides protection against filesystem corruption caused by errant
> +writes into the RAM due to kernel bugs for instance. In case there are systems
> +where the write protection is not possible (for instance the RAM cannot be
> +mapped with page tables), this feature can be disabled via the
> +CONFIG_PRAMFS_WRITE_PROTECT config option and at mount time.
> +
> +PRAMFS supports extended attributes, ACLs, security labels, freezeing, the
freezing,
> +new lseek options SEEK_DATA/SEEK_HOLE and file pre-allocation (fallocate).
> +
> +In summary, PRAMFS is a light-weight special filesystem that is ideal for
> +systems with a block of fast non-volatile RAM that need to access data on it
> +using a standard filesytem interface.
filesystem
> +
> +Supported mount options
> +=======================
> +
> +The PRAMFS currently requires one mount option, and there are several
> +optional mount options:
> +
> +physaddr= Required. It tells PRAMFS the physical address of the
> + start of the RAM that makes up the filesystem. The
> + physical address must be located on a page boundary.
> +
> +init= Optional. It is used to initialize the memory to an
> + empty filesystem. Any data in an existing filesystem
> + will be lost if this option is given. The parameter to
> + "init=" is the RAM in kilo/mega/giga bytes.
> +
> +bs= Optional. It is used to specify a block size. It is
> + ignored if the "init=" option is not specified, since
> + otherwise the block size is read from the PRAMFS
> + super-block. The default blocksize is 2048 bytes,
> + and the allowed block sizes are 512, 1024, 2048, and
> + 4096.
> +
> +bpi= Optional. It is used to specify the bytes per inode
> + ratio, i.e. for every N bytes in the filesystem, an
> + inode will be created. This behaves the same as the "-i"
> + option to mke2fs. It is ignored if the "init=" option is
> + not specified.
> +
> +N= Optional. It is used to specify the number of inodes to
> + allocate in the inode table. If the option is not
> + specified, the bytes-per-inode ratio is used to
> + calculate the number of inodes. If neither the "N=" or
> + "bpi=" options are specified, the default behavior is to
> + reserve 5% of the total space in the filesystem for the
> + inode table. This option behaves the same as the "-N"
> + option to mke2fs. It is ignored if the "init=" option is
> + not specified.
> +
> +errors= Optional. It can be "cont", "remount-ro" and "panic". With the
or
> + first value no action is done in case of error. With the second
> + one the fs is mounted read-only. with the third one a kernel
> + panic happens. Default action is to continue on error.
> +
> +acl,noacl Optional. Enable/disable the support for access control lists
> + (disabled by default).
> +
> +user_xattr, Optional. Enable/disable the support for the user extended
> +user_noxattr attributes (disabled by default).
> +
> +noprotect Optional. Disable the memory protection (enabled by default).
> +
> +xip Optional. Enable the execute-in-place (disabled by default).
> +
> +Examples:
> +
> +mount -t pramfs -o physaddr=0x20000000,init=1M,bs=1k none /mnt/pram
> +
> +This example locates the filesystem at physical address 0x20000000, and
> +also requests an empty filesystem be initialized, of total size of one
> +megabyte and blocksize of one kilobyte. The mount point is /mnt/pram.
> +
> +mount -t pramfs -o physaddr=0x20000000 none /mnt/pram
> +
> +This example locates the filesystem at physical address 0x20000000 as in
> +the first example, but uses the intact filesystem that already exists.
> +
> +Current Limitations
> +===================
> +
> +- The RAM used for PRAMFS must be directly addressable.
> +
> +- PRAMFS does not support hard links.
> +
> +- PRAMFS supports only private memory mappings. This allows most
> + executables to run, but programs that attempt shared memory
> + mappings, such as X apps that use X shared memory, will fail.
> +
> +- PRAMFS does not support quota settings.
> +
> +Further Documentation
> +=====================
> +
> +If you are interested in the internal design of PRAMFS, there is
> +documentation available at the Sourceforge PRAMFS home page at
> +http://pramfs.sourceforge.net/.
> +
> +Please send bug reports/comments/feedback to the pramfs development
> +list at sourceforge: [email protected].
--
~Randy