This is the start of the review cycle for the Linux 3.11.10.4 stable kernel.
This version contains 233 new patches, summarized below. The new patches are
posted as replies to this message and also available in this git branch:
http://kernel.ubuntu.com/git?p=ubuntu/linux.git;h=linux-3.11.y-review;a=shortlog
git://kernel.ubuntu.com/ubuntu/linux.git linux-3.11.y-review
The review period for version 3.11.10.4 will be open for the next three days.
To report a problem, please reply to the relevant follow-up patch message.
For more information about the Linux 3.11.y.z extended stable kernel version,
see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable .
-Luis
--
Documentation/devicetree/bindings/ata/marvell.txt | 2 +-
Documentation/filesystems/proc.txt | 4 +-
arch/Kconfig | 3 +
arch/arm/boot/dts/armada-370-xp.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/mach-at91/sam9_smc.c | 2 +-
arch/arm/mach-highbank/highbank.c | 1 +
arch/arm/mach-omap2/omap4-common.c | 1 +
arch/arm/mach-shmobile/board-armadillo800eva.c | 4 +-
arch/arm/mach-shmobile/board-kzm9g.c | 2 +-
arch/arm/mach-shmobile/board-mackerel.c | 4 +-
arch/arm/net/bpf_jit_32.c | 6 +-
arch/parisc/include/asm/cacheflush.h | 2 -
arch/parisc/include/asm/page.h | 3 +-
arch/parisc/kernel/cache.c | 14 ++
arch/powerpc/include/asm/topology.h | 10 +-
arch/powerpc/kernel/cacheinfo.c | 3 +
arch/powerpc/kvm/book3s_hv.c | 7 +-
arch/powerpc/kvm/e500_mmu.c | 2 +-
arch/powerpc/mm/numa.c | 70 +++++++++-
arch/powerpc/net/bpf_jit_comp.c | 7 +-
arch/powerpc/platforms/Kconfig.cputype | 1 +
arch/s390/include/uapi/asm/statfs.h | 10 +-
arch/s390/kvm/diag.c | 2 +-
arch/s390/net/bpf_jit_comp.c | 29 +++--
arch/sh/kernel/kgdb.c | 1 +
arch/sparc/net/bpf_jit_comp.c | 17 ++-
arch/x86/include/asm/pgtable_types.h | 3 +-
arch/x86/include/uapi/asm/msr-index.h | 1 +
arch/x86/kernel/cpu/amd.c | 10 ++
arch/x86/kernel/cpu/perf_event_amd_ibs.c | 53 ++++++--
arch/x86/kvm/i8254.c | 18 +++
arch/x86/kvm/lapic.c | 5 +-
arch/x86/kvm/x86.c | 3 +
arch/x86/kvm/x86.h | 2 +
arch/x86/net/bpf_jit_comp.c | 14 +-
arch/x86/platform/efi/efi.c | 2 +-
arch/x86/xen/platform-pci-unplug.c | 74 +++++++++++
arch/xtensa/platforms/xtfpga/setup.c | 12 +-
drivers/acpi/acpi_lpss.c | 1 -
drivers/acpi/bus.c | 9 ++
drivers/ata/libata-core.c | 27 ++++
drivers/ata/libata-scsi.c | 18 ++-
drivers/ata/sata_mv.c | 25 ++++
drivers/block/xen-blkfront.c | 4 +-
drivers/char/tpm/tpm_i2c_stm_st33.c | 7 +-
drivers/char/tpm/tpm_ppi.c | 8 +-
drivers/clk/samsung/clk-exynos4.c | 2 +-
drivers/clk/samsung/clk-exynos5250.c | 7 +-
drivers/edac/e752x_edac.c | 4 +-
drivers/eisa/eisa-bus.c | 26 ++--
drivers/gpu/drm/ast/ast_fb.c | 2 +-
drivers/gpu/drm/cirrus/cirrus_fbdev.c | 2 +-
drivers/gpu/drm/cirrus/cirrus_mode.c | 4 +-
drivers/gpu/drm/i915/i915_dma.c | 1 +
drivers/gpu/drm/i915/i915_gem_stolen.c | 2 +-
drivers/gpu/drm/i915/i915_reg.h | 10 +-
drivers/gpu/drm/i915/intel_ddi.c | 8 +-
drivers/gpu/drm/i915/intel_display.c | 4 +-
drivers/gpu/drm/i915/intel_dp.c | 40 ++++--
drivers/gpu/drm/i915/intel_ringbuffer.c | 12 +-
drivers/gpu/drm/mgag200/mgag200_cursor.c | 8 +-
drivers/gpu/drm/mgag200/mgag200_fb.c | 2 +-
drivers/gpu/drm/nouveau/core/engine/falcon.c | 20 ++-
drivers/gpu/drm/nouveau/core/subdev/bios/init.c | 8 +-
drivers/gpu/drm/nouveau/nouveau_bo.c | 33 ++---
drivers/gpu/drm/radeon/atombios_crtc.c | 25 +++-
drivers/gpu/drm/radeon/evergreen.c | 4 +-
drivers/gpu/drm/radeon/evergreen_cs.c | 5 +-
drivers/gpu/drm/radeon/ni.c | 16 +--
drivers/gpu/drm/radeon/nid.h | 1 +
drivers/gpu/drm/radeon/r600.c | 13 +-
drivers/gpu/drm/radeon/r600_cs.c | 5 +-
drivers/gpu/drm/radeon/r600d.h | 1 +
drivers/gpu/drm/radeon/radeon_atombios.c | 4 +
drivers/gpu/drm/radeon/radeon_i2c.c | 3 +
drivers/gpu/drm/radeon/radeon_pm.c | 6 +-
drivers/gpu/drm/radeon/rv770_dpm.c | 6 +
drivers/gpu/drm/radeon/si.c | 2 +-
drivers/gpu/drm/radeon/sid.h | 2 +-
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 1 -
drivers/gpu/drm/rcar-du/rcar_du_plane.c | 21 +--
drivers/hwmon/coretemp.c | 2 +-
drivers/hwmon/k10temp.c | 1 +
drivers/infiniband/hw/qib/qib_ud.c | 9 +-
drivers/input/misc/xen-kbdfront.c | 4 +
drivers/iommu/intel-iommu.c | 2 +-
drivers/md/Kconfig | 4 +
drivers/md/Makefile | 1 +
drivers/md/bcache/bset.c | 26 +++-
drivers/md/dm-builtin.c | 48 +++++++
drivers/md/dm-sysfs.c | 5 +-
drivers/md/dm-thin-metadata.c | 20 +++
drivers/md/dm-thin-metadata.h | 2 +
drivers/md/dm-thin.c | 120 ++++++++++-------
drivers/md/dm.c | 15 +--
drivers/md/dm.h | 17 +++
drivers/md/md.c | 18 ++-
drivers/md/md.h | 3 +
drivers/md/persistent-data/dm-space-map-common.c | 6 +-
drivers/md/persistent-data/dm-space-map-metadata.c | 28 +++-
drivers/md/raid10.c | 12 +-
drivers/md/raid5.c | 5 +-
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/dvb-frontends/dib8000.c | 42 ++++--
drivers/media/dvb-frontends/m88rs2000.c | 117 ++++++++++++-----
drivers/media/dvb-frontends/m88rs2000.h | 2 +
drivers/media/dvb-frontends/nxt200x.c | 2 +-
drivers/media/platform/s5p-mfc/s5p_mfc.c | 28 +---
drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 9 --
drivers/media/usb/dvb-usb-v2/anysee.c | 3 +-
drivers/media/usb/dvb-usb-v2/it913x.c | 3 +
drivers/mfd/max77686.c | 2 +-
drivers/mmc/card/block.c | 7 +-
drivers/mmc/host/atmel-mci.c | 13 +-
drivers/mmc/host/sdhci-pci.c | 12 ++
drivers/mtd/nand/mxc_nand.c | 1 -
drivers/net/ethernet/arc/emac_main.c | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 13 +-
drivers/net/ethernet/intel/e1000e/phy.c | 10 +-
drivers/net/ethernet/sfc/efx.c | 4 +
drivers/net/ethernet/sfc/nic.h | 2 +
drivers/net/ethernet/sfc/ptp.c | 69 ++++++++--
drivers/net/ethernet/via/via-rhine.c | 1 +
drivers/net/wireless/b43/b43.h | 4 +-
drivers/net/wireless/b43/main.c | 27 ++--
drivers/net/wireless/b43/xmit.c | 4 +-
drivers/net/wireless/b43legacy/main.c | 1 +
drivers/net/wireless/iwlwifi/iwl-prph.h | 4 +
drivers/net/wireless/iwlwifi/mvm/ops.c | 1 +
drivers/net/wireless/iwlwifi/pcie/trans.c | 22 ++++
drivers/net/wireless/mwifiex/fw.h | 2 +-
drivers/net/wireless/mwifiex/scan.c | 4 +-
drivers/net/wireless/rtlwifi/base.c | 3 +-
drivers/net/wireless/rtlwifi/core.c | 11 ++
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 36 ++++++
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h | 14 ++
drivers/net/wireless/rtlwifi/rtl8192cu/dm.c | 9 ++
drivers/net/wireless/rtlwifi/rtl8192cu/dm.h | 3 +
drivers/net/wireless/rtlwifi/rtl8192cu/rf.c | 29 +++--
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 17 ++-
drivers/net/wireless/rtlwifi/stats.c | 14 ++
drivers/net/wireless/rtlwifi/usb.c | 4 +-
drivers/net/wireless/rtlwifi/wifi.h | 33 ++---
drivers/net/xen-netfront.c | 90 ++++---------
drivers/parport/parport_pc.c | 10 +-
drivers/pci/xen-pcifront.c | 4 +
drivers/pinctrl/pinctrl-baytrail.c | 1 -
drivers/pinctrl/pinctrl-sunxi.c | 13 +-
drivers/platform/x86/hp_accel.c | 1 +
drivers/rtc/rtc-max8907.c | 11 +-
drivers/scsi/bfa/bfad.c | 6 +-
drivers/scsi/sd.c | 5 +-
drivers/scsi/virtio_scsi.c | 15 ++-
drivers/spi/spi-bcm63xx.c | 2 -
drivers/spi/spi-pxa2xx.c | 2 +
drivers/spi/spi.c | 4 +-
drivers/staging/comedi/drivers/addi_apci_1032.c | 4 +-
drivers/staging/comedi/drivers/adl_pci9111.c | 2 +-
drivers/staging/rtl8712/usb_intf.c | 5 +
drivers/staging/vt6656/baseband.c | 3 -
drivers/staging/vt6656/card.c | 2 +-
drivers/staging/zram/zram_drv.c | 4 +-
drivers/target/iscsi/iscsi_target.c | 34 +++--
drivers/tty/serial/8250/8250_core.c | 4 +
drivers/tty/serial/8250/8250_pci.c | 8 +-
drivers/tty/serial/amba-pl011.c | 6 +
drivers/tty/serial/atmel_serial.c | 20 ++-
drivers/usb/chipidea/ci.h | 26 +++-
drivers/usb/chipidea/ci_hdrc_imx.c | 32 ++++-
drivers/usb/chipidea/core.c | 2 +
drivers/usb/chipidea/host.c | 1 +
drivers/usb/chipidea/udc.c | 19 ++-
drivers/usb/core/config.c | 7 -
drivers/usb/core/hub.c | 54 +++-----
drivers/usb/host/ehci.h | 18 ++-
drivers/usb/host/xhci.c | 3 +
drivers/usb/serial/cypress_m8.h | 2 +-
drivers/usb/serial/ftdi_sio.c | 17 ++-
drivers/usb/serial/option.c | 15 +++
drivers/usb/serial/pl2303.c | 33 +++--
drivers/usb/storage/unusual_devs.h | 7 +
drivers/video/xen-fbfront.c | 4 +
drivers/xen/xenbus/xenbus_probe_frontend.c | 2 +-
fs/btrfs/extent-tree.c | 2 +-
fs/btrfs/ioctl.c | 6 +
fs/dcache.c | 7 +-
fs/dcookies.c | 2 +-
fs/exofs/ore.c | 37 ++++--
fs/ext4/inline.c | 8 +-
fs/fs-writeback.c | 15 ++-
fs/fuse/dev.c | 22 +---
fs/gfs2/inode.c | 16 ++-
fs/hpfs/alloc.c | 66 +++++++++-
fs/hpfs/hpfs_fn.h | 2 +-
fs/hpfs/super.c | 29 ++++-
fs/mount.h | 2 +-
fs/nfs/nfs4client.c | 18 +--
fs/nfs/nfs4proc.c | 38 +++++-
fs/nfs/nfs4xdr.c | 47 ++++---
fs/nfs/write.c | 11 +-
fs/nilfs2/segment.c | 10 +-
fs/notify/fanotify/fanotify_user.c | 4 +-
fs/read_write.c | 16 +--
fs/splice.c | 18 +++
include/linux/audit.h | 2 +-
include/linux/compat.h | 18 +--
include/linux/hugetlb.h | 6 +
include/linux/libata.h | 2 +
include/linux/mm.h | 13 +-
include/linux/netdevice.h | 13 ++
include/linux/pipe_fs_i.h | 2 +
include/linux/usb/chipidea.h | 1 +
include/scsi/osd_ore.h | 1 +
include/xen/platform_pci.h | 23 ++++
kernel/audit.c | 5 +-
kernel/trace/ftrace.c | 103 +++++++++++----
kernel/trace/trace.c | 8 ++
lib/decompress_inflate.c | 2 +-
mm/huge_memory.c | 18 ++-
mm/hugetlb.c | 17 +++
mm/memcontrol.c | 53 +++++++-
mm/memory-failure.c | 21 +--
mm/mempolicy.c | 19 ++-
mm/oom_kill.c | 2 +-
mm/page-writeback.c | 55 ++++----
mm/slub.c | 8 +-
mm/swap.c | 143 ++++++++++++---------
mm/util.c | 5 +-
net/bridge/br_private.h | 10 ++
net/bridge/br_stp_bpdu.c | 2 +-
net/compat.c | 9 +-
net/core/filter.c | 30 +----
net/core/skbuff.c | 32 +----
net/ieee802154/nl-phy.c | 6 +-
net/ipv4/fib_frontend.c | 2 +
net/ipv4/gre_offload.c | 11 +-
net/ipv4/inet_diag.c | 4 +-
net/ipv4/ip_input.c | 2 +-
net/ipv4/ip_tunnel.c | 1 +
net/ipv4/ipmr.c | 7 +-
net/ipv4/tcp_metrics.c | 51 +++++---
net/ipv4/udp.c | 6 +-
net/ipv4/udp_offload.c | 37 +++---
net/ipv6/ip6_input.c | 2 +-
net/ipv6/ip6_tunnel.c | 12 ++
net/ipv6/ip6mr.c | 7 +-
net/ipv6/sit.c | 10 ++
net/netfilter/nf_nat_irc.c | 32 ++++-
net/rds/ib_recv.c | 7 +-
net/sunrpc/auth_gss/gss_rpc_upcall.c | 2 -
net/sunrpc/auth_gss/svcauth_gss.c | 33 +----
net/sunrpc/clnt.c | 8 +-
net/sunrpc/netns.h | 1 -
security/selinux/ss/policydb.c | 14 +-
sound/core/init.c | 4 +-
sound/pci/Kconfig | 12 ++
sound/pci/hda/hda_generic.c | 6 +-
sound/pci/hda/patch_hdmi.c | 100 ++++++++++----
sound/pci/hda/patch_realtek.c | 19 ++-
sound/pci/rme9652/rme9652.c | 2 +-
sound/soc/codecs/adau1701.c | 2 +-
sound/soc/codecs/wm5110.c | 48 +++++++
.../perf/util/scripting-engines/trace-event-perl.c | 2 +-
tools/perf/util/session.c | 7 +-
tools/power/x86/turbostat/Makefile | 2 +-
tools/power/x86/turbostat/turbostat.c | 13 +-
269 files changed, 2633 insertions(+), 1092 deletions(-)
AKASHI Takahiro (1):
audit: correct a type mismatch in audit_syscall_exit()
Abhilash Kesavan (2):
ARM: dts: exynos5250: Fix MDMA0 clock number
clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock
Adrian Hunter (2):
mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
mmc: sdhci-pci: Fix possibility of chip->fixes being null
Adrien Vergé (1):
ALSA: hda - Fix silent output on MacBook Air 1,1
Akash Goel (1):
drm/i915: Fix the offset issue for the stolen GEM objects
Alan Stern (1):
USB: fix race between hub_disconnect and recursively_mark_NOTATTACHED
Alex Deucher (8):
drm/radeon: warn users when hw_i2c is enabled (v2)
drm/radeon: disable ss on DP for DCE3.x
drm/radeon/dpm: disable mclk switching on desktop RV770
drm/radeon: fix surface sync in fence on cayman (v2)
drm/radeon: set the full cache bit for fences on r7xx+
drm/radeon: fix DAC interrupt handling on DCE5+
drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
drm/radeon/dce8: workaround for atom BlankCrtc table
Alex Williamson (1):
intel-iommu: fix off-by-one in pagetable freeing
Alexandre Courbot (1):
lib/decompressors: fix "no limit" output buffer length
Alexandre Rames (1):
sfc: Stop/re-start PTP when stopping/starting the datapath.
Amitkumar Karwar (1):
mwifiex: add missing endian conversion for fw_tsf
Andrea Arcangeli (1):
mm: hugetlbfs: fix hugetlbfs optimization
Andreas Rohner (1):
nilfs2: fix segctor bug that causes file system corruption
Andreas Schwab (1):
KVM: PPC: Book3S HV: use xics_wake_cpu only when defined
Andrew Bresticker (1):
clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks
Andrew Jones (1):
kvm: x86: fix apic_base enable check
Andrey Vagin (1):
mm: don't lose the SOFT_DIRTY flag on mprotect
Andy Grover (1):
target/iscsi: Fix network portal creation race
Aneesh Kumar K.V (1):
powerpc: thp: Fix crash on mremap
Annie Li (1):
xen-netfront: fix resource leak in netfront
Anssi Hannula (1):
ALSA: hda - hdmi: introduce patch_nvhdmi()
Antti Palosaari (1):
[media] anysee: fix non-working E30 Combo Plus DVB-T
Aristeu Rozanski (1):
e752x_edac: Fix pci_dev usage count
Arnaldo Carvalho de Melo (1):
perf scripting perl: Fix build error on Fedora 12
Asias He (1):
virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freeze
Ben Hutchings (3):
sfc: Add length checks to efx_xmit_with_hwtstamp() and efx_ptp_is_ptp_tx()
sfc: Rate-limit log message for PTP packets without a matching timestamp event
sfc: Maintain current frequency adjustment when applying a time offset
Bernd Schubert (1):
[SCSI] sd: Reduce buffer size for vpd request
Bing Zhao (1):
mwifiex: fix wrong 11ac bits setting in fw_cap_info
Bjorn Helgaas (1):
Revert "EISA: Initialize device before its resources"
Boaz Harrosh (2):
pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done
ore: Fix wrong math in allocation of per device BIO
Bob Peterson (1):
GFS2: Increase i_writecount during gfs2_setattr_chown
Borislav Petkov (1):
x86, cpu, amd: Add workaround for family 16h, erratum 793
Charles Keepax (1):
ASoC: wm5110: Extend SYSCLK patch file for rev D
Chen-Yu Tsai (1):
pinctrl: sunxi: Honor GPIO output initial vaules
Chris Wilson (1):
drm/i915: Flush outstanding requests before allocating new seqno
Christian Engelmayer (1):
ieee802154: Fix memory leak in ieee802154_add_iface()
Christoph Paasch (1):
tcp: metrics: Avoid duplicate entries with the same destination-IP
Colin Leitner (1):
USB: ftdi_sio: added CS5 quirk for broken smartcard readers
Dan Carpenter (1):
ALSA: bits vs bytes bug in snd_card_create()
Daniel Borkmann (1):
netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
Daniel Santos (1):
spidev: fix hang when transfer_one_message fails
Dave Airlie (2):
drm/mgag200: fix oops in cursor code.
drm: ast,cirrus,mgag200: use drm_can_sleep
Dave Young (1):
x86/efi: Fix off-by-one bug in EFI Boot Services reservation
David Ertman (1):
e1000e: fix compiler warnings
David Rientjes (2):
mm, oom: base root bonus on current usage
mm/mempolicy.c: fix mempolicy printing in numa_maps
David Sterba (1):
btrfs: restrict snapshotting to own subvolumes
Dongsheng Yang (1):
perf kvm: Fix kvm report without guestmount.
Duan Jiong (1):
ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
Eliad Peller (1):
iwlwifi: mvm: fix missing cleanup in .start() error path
Emmanuel Grumbach (1):
iwlwifi: pcie: enable oscillator for L1 exit
Eric Dumazet (2):
arc_emac: fix potential use after free
bpf: do not use reciprocal divide
Eric W. Biederman (2):
vfs: In d_path don't call d_dname on a mount point
vfs: Is mounted should be testing mnt_ns for NULL or error.
Geert Uytterhoeven (1):
mm: Make {,set}page_address() static inline if WANT_PAGE_VIRTUAL
Gerald Schaefer (1):
net: rds: fix per-cpu helper usage
H Hartley Sweeten (2):
staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq()
staging: comedi: addi_apci_1032: fix subdevice type/flags bug
Hannes Frederic Sowa (1):
net: avoid reference counter overflows on fib_rules in multicast forwarding
Heiko Carstens (6):
KVM: s390: fix diagnose code extraction
s390/uapi: fix struct statfs64 definition
compat: fix sys_fanotify_mark
fs/compat: fix parameter handling for compat readv/writev syscalls
fs/compat: fix lookup_dcookie() parameter handling
s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions
Helge Deller (1):
parisc: fix cache-flushing
Holger Eitzenberger (1):
net: Fix memory leak if TPROXY used with TCP early demux
Hugh Dickins (1):
thp: fix copy_page_rep GPF by testing is_huge_zero_pmd once only
Ilia Mirkin (2):
drm/nouveau/falcon: use vmalloc to create firwmare copies
drm/nouveau/bios: fix offset calculation for BMPv1 bioses
Ira Weiny (1):
IB/qib: Fix QP check when looping back to/from QP1
Jack Pham (1):
usb: xhci: Check for XHCI_PLAT in xhci_cleanup_msix()
Jan Kara (1):
writeback: Fix data corruption on NFS
Jean Delvare (1):
hwmon: (coretemp) Fix truncated name of alarm attributes
Jean-Jacques Hiblot (1):
ARM: at91: smc: bug fix in sam9_smc_cs_read()
Jeff Layton (1):
sunrpc: don't wait for write before allowing reads from use-gss-proxy file
Jiri Pirko (1):
br: fix use of ->rx_handler_data in code executed on non-rx_handler path
Joe Thornber (5):
dm thin: always fallback the pool mode if commit fails
dm thin: fix discard support to a previously shared block
dm space map common: make sure new space is used during extend
dm space map metadata: fix extending the space map
dm space map metadata: fix bug in resizing of thin metadata
Johan Hovold (2):
USB: cypress_m8: fix ring-indicator detection and reporting
USB: pl2303: fix data corruption on termios updates
Johannes Weiner (2):
mm: memcg: fix race condition between memcg teardown and swapin
mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory
Jon Medhurst (1):
serial: amba-pl011: use port lock to guard control register access
Jonas Gorski (1):
spi/bcm63xx: don't substract prepend length from total length
Jonathan Woithe (1):
serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
Josh Triplett (2):
turbostat: Don't put unprocessed uapi headers in the include path
turbostat: Use GCC's CPUID functions to support PIC
Kent Overstreet (1):
bcache: Data corruption fix
Konrad Rzeszutek Wilk (1):
xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).
Krzysztof Kozlowski (1):
mfd: max77686: Fix regmap resource leak on driver remove
Larry Finger (17):
rtlwifi: rtl8192c: Prevent reconnect attempts if not connected
rtlwifi: rtl8192cu: Add new firmware
rtlwifi: Redo register save locations
rtlwifi: Set the link state
rtlwifi: rtl8192c: Add new definitions in the dm_common header
rtlwifi: Increase the RX queue length for USB drivers
rtlwifi: Update beacon statistics for USB driver
rtlwifi: rtl8192c: Add routines to save/restore power index registers
rtlwifi: rtl8192cu: Update the power index registers
rtlwifi: rtl8192cu: Fix some code in RF handling
rtlwifi: Add missing code to PWDB statics routine
rtlwifi: rtl8188ee: Fix typo in code
staging: r8712u: Set device type to wlan
rtlwifi: rtl8192cu: Add new device ID
b43: Fix lockdep splat
b43: Fix unload oops if firmware is not available
b43legacy: Fix unload oops if firmware is not available
Lars-Peter Clausen (1):
ASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constant
Laurence Evans (1):
sfc: PTP: Moderate log message on event queue overflow
Laurent Pinchart (4):
ARM: shmobile: kzm9g: Fix coherent DMA mask
ARM: shmobile: armadillo: Fix coherent DMA mask
ARM: shmobile: mackerel: Fix coherent DMA mask
drm/rcar-du: Update plane pitch in .mode_set_base() operation
Li Zefan (1):
slub: Fix calculation of cpu slabs
Lior Amsalem (1):
ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
Ludovic Desroches (2):
ARM: at91: at91sam9g45: set default mmc pinctrl-names
mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA
Maarten Lankhorst (1):
drm/nouveau: fix m2mf copy to tiled gart
Malcolm Priestley (5):
staging: vt6656: [BUG] BBvUpdatePreEDThreshold Always set sensitivity on bScanning
[media] it913x: Add support for Avermedia H335 id 0x0335
[media] m88rs2000: add m88rs2000_set_carrieroffset
[media] m88rs2000: set symbol rate accurately
staging: vt6656: CARDqGetNextTBTT correct uLowNextTBTT
Marcelo Tosatti (1):
KVM: x86: limit PIT timer frequency
Marek Olšák (1):
drm/radeon: skip colorbuffer checking if COLOR_INFO.FORMAT is set to INVALID
Marek Roszko (1):
tty/serial: at91: Handle shutdown more safely
Marek Szyprowski (1):
[media] media: s5p_mfc: remove s5p_mfc_get_node_type() function
Mark Brown (1):
ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API
Mauro Carvalho Chehab (2):
[media] dib8000: make 32 bits read atomic
[media] nxt200x: increase write buffer size
Max Filippov (1):
xtensa: xtfpga: fix definitions of platform devices
Mel Gorman (1):
mm: numa: initialise numa balancing after jump label initialisation
Michael Grzeschik (1):
mtd: mxc_nand: remove duplicated ecc_stats counting
Michal Hocko (1):
memcg: fix endless loop caused by mem_cgroup_iter
Michal Schmidt (1):
bnx2x: fix DMA unmapping of TSO split BDs
Michel Dänzer (1):
radeon/pm: Guard access to rdev->pm.power_state array
Mihai Caraman (1):
KVM: PPC: e500: Fix bad address type in deliver_tlb_misss()
Mika Westerberg (1):
spi/pxa2xx: initialize DMA channels to -1 to prevent inadvertent match
Mike Snitzer (3):
dm thin: switch to read-only mode if metadata space is exhausted
dm thin: initialize dm_thin_new_mapping returned by get_next_mapping
dm thin: fix set_pool_mode exposed pool operation races
Mikhail Zolotaryov (1):
USB: Nokia 502 is an unusual device
Miklos Szeredi (1):
fuse: fix pipe_buf_operations
Mikulas Patocka (5):
mm: fix crash when using XFS on loopback
dm: wait until embedded kobject is released before destroying a device
dm: remove pointless kobject comparison in dm_get_from_kobject
dm sysfs: fix a module unload race
hpfs: remember free space
Minchan Kim (1):
zram: fix race between reset and flushing pending work
Naoya Horiguchi (1):
mm/memory-failure.c: shift page lock from head page to tail page after thp split
Neal Cardwell (1):
inet_diag: fix inet_diag_dump_icsk() timewait socket state logic
NeilBrown (5):
md/raid5: Fix possible confusion when multiple write errors occur.
md/raid10: fix two bugs in handling of known-bad-blocks.
md/raid10: fix bug when raid10 recovery fails to recover a block.
md: fix problem when adding device to read-only array with bitmap.
md/raid5: fix long-standing problem with bitmap handling on write failure.
Nicolas Dichtel (3):
sit: fix double free of fb_tunnel_dev on exit
Revert "ip6tnl: fix use after free of fb_tnl_dev"
ip6tnl: fix double free of fb_tnl_dev on exit
Oliver Hartkopp (1):
fib_frontend: fix possible NULL pointer dereference
Olivier Grenie (1):
[media] dib8000: fix regression with dib807x
PaX Team (1):
x86, x32: Correct invalid use of user timespec in the kernel
Paul Mackerras (1):
powerpc: Make sure "cache" directory is removed when offlining cpu
Paulo Zanoni (1):
drm/i915: fix DDI PLLs HW state readout code
Peter Chen (4):
usb: ehci: add freescale imx28 special write register method
usb: chipidea: add freescale imx28 special write register method
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
Peter Huewe (2):
tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount
Phil Pokorny (1):
hwmon: (k10temp) Add support for Kaveri CPUs
Rafael J. Wysocki (1):
Revert "ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs"
Rahul Bedarkar (1):
USB: serial: add support for iBall 3.5G connect usb modem
Ray Jui (1):
mmc: fix host release issue after discard operation
Richard Guy Briggs (1):
audit: reset audit backlog wait time after error recovery
Richard Weinberger (1):
net,via-rhine: Fix tx_timeout handling
Robert Richter (1):
perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10h
Scott Mayhew (1):
nfs: always make sure page is up-to-date before extending a write to cover the entire page
Sebastian Andrzej Siewior (1):
parport: parport_pc: remove double PCI ID for NetMos
Seung-Woo Kim (1):
clk: samsung: exynos4: Correct SRC_MFC register
Simon Guinot (2):
ata: sata_mv: introduce compatible string "marvell, armada-370-sata"
ARM: mvebu: update the SATA compatible string for Armada 370/XP
Srivatsa S. Bhat (1):
powerpc: Fix the setup of CPU-to-Node mappings during CPU online
Stanislaw Gruszka (1):
i915: remove pm_qos request on error
Stephen Warren (3):
serial: 8250: enable UART_BUG_NOMSR for Tegra
rtc: max8907: weekday encoding fixes
ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled
Steven Rostedt (Red Hat) (4):
ftrace: Fix synchronization location disabling and freeing ftrace_ops
tracing: Have trace buffer point back to trace_array
tracing: Check if tracing is enabled in trace_puts()
ftrace: Have function graph only trace based on global_ops filters
Takashi Iwai (5):
ALSA: rme9652: fix a missing comma in channel_map_9636_ds[]
ALSA: hda - Don't create duplicated ctls for loopback paths
ALSA: Enable CONFIG_ZONE_DMA for smaller PCI DMA masks
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
drm/cirrus: correct register values for 16bpp
Taras Kondratiuk (1):
ARM: 7938/1: OMAP4/highbank: Flush L2 cache before disabling
Tejun Heo (1):
libata: disable LPM for some WD SATA-I devices
Tetsuo Handa (1):
SELinux: Fix memory leak upon loading policy
Theodore Ts'o (1):
ext4: avoid clearing beyond i_blocks when truncating an inline data file
Thomas Pugliese (1):
usb: core: get config and string descriptors for unauthorized devices
Todd Previte (1):
drm/i915: VLV2 - Fix hotplug detect bits
Trond Myklebust (2):
NFSv4: OPEN must handle the NFS4ERR_IO return code correctly
NFSv4.1: Handle errors correctly in nfs41_walk_client_list
Vijaya Mohan Guvva (1):
[SCSI] bfa: Chinook quad port 16G FC HBA claim issue
Ville Syrjälä (1):
drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init()
Wang Shilong (1):
Btrfs: handle EAGAIN case properly in btrfs_drop_snapshot()
Wanlong Gao (1):
arch/sh/kernel/kgdb.c: add missing #include <linux/sched.h>
Wei-Chun Chao (1):
ipv4: fix tunneled VM traffic over hw VXLAN/GRE GSO NIC
Weston Andros Adamson (3):
sunrpc: Fix infinite loop in RPC state machine
nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME
nfs4: fix discover_server_trunking use after free
Yegor Yefremov (1):
serial: add support for 200 v3 series Titan card
ZHAO Gang (1):
b43: fix the wrong assignment of status.freq in b43_rx()
张君 (1):
usb: option: add new zte 3g modem pids to option driver
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit 4a02b34e0cf1d0d0dd3737702841da4bf615a50a upstream.
Switch the thin pool to read-only mode in alloc_data_block() if
dm_pool_alloc_data_block() fails because the pool's metadata space is
exhausted.
Differentiate between data and metadata space in messages about no
free space available.
This issue was noticed with the device-mapper-test-suite using:
dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/
The quantity of errors logged in this case must be reduced.
before patch:
device-mapper: thin: 253:4: reached low water mark for metadata device: sending event.
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map common: dm_tm_shadow_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map common: dm_tm_shadow_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map common: dm_tm_shadow_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map common: dm_tm_shadow_block() failed
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: space map common: dm_tm_shadow_block() failed
<snip ... these repeat for a _very_ long while ... >
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: 253:4: commit failed: error = -28
device-mapper: thin: 253:4: switching pool to read-only mode
after patch:
device-mapper: thin: 253:4: reached low water mark for metadata device: sending event.
device-mapper: space map metadata: unable to allocate new metadata block
device-mapper: thin: 253:4: no free metadata space available.
device-mapper: thin: 253:4: switching pool to read-only mode
Signed-off-by: Mike Snitzer <[email protected]>
Acked-by: Joe Thornber <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-thin.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 203c104..49ec256 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -951,7 +951,7 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
* doing all this checking and return -ENOSPC.
*/
if (!free_blocks) {
- DMWARN("%s: no free space available.",
+ DMWARN("%s: no free data space available.",
dm_device_name(pool->pool_md));
spin_lock_irqsave(&pool->lock, flags);
pool->no_free_space = 1;
@@ -962,8 +962,16 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
}
r = dm_pool_alloc_data_block(pool->pmd, result);
- if (r)
+ if (r) {
+ if (r == -ENOSPC &&
+ !dm_pool_get_free_metadata_block_count(pool->pmd, &free_blocks) &&
+ !free_blocks) {
+ DMWARN("%s: no free metadata space available.",
+ dm_device_name(pool->pool_md));
+ set_pool_mode(pool, PM_READ_ONLY);
+ }
return r;
+ }
return 0;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <[email protected]>
commit b6328a6b7ba57fc84c38248f6f0e387e1170f1a8 upstream.
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better
handing of DMA masks for coherent allocations") added an additional
check to the coherent DMA mask that results in an error when the mask is
larger than what dma_addr_t can address.
Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix
the problem.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-shmobile/board-mackerel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 85f51a8..07ef12a 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -421,7 +421,7 @@ static struct platform_device lcdc_device = {
.resource = lcdc_resources,
.dev = {
.platform_data = &lcdc_info,
- .coherent_dma_mask = ~0,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -497,7 +497,7 @@ static struct platform_device hdmi_lcdc_device = {
.id = 1,
.dev = {
.platform_data = &hdmi_lcdc_info,
- .coherent_dma_mask = ~0,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit e8b849158508565e0cd6bc80061124afc5879160 upstream.
commit e875ecea266a543e643b19e44cf472f1412708f9
md/raid10 record bad blocks as needed during recovery.
added code to the "cannot recover this block" path to record a bad
block rather than fail the whole recovery.
Unfortunately this new case was placed *after* r10bio was freed rather
than *before*, yet it still uses r10bio.
This is will crash with a null dereference.
So move the freeing of r10bio down where it is safe.
Fixes: e875ecea266a543e643b19e44cf472f1412708f9
Reported-by: Damian Nowak <[email protected]>
URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/raid10.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index cc9b777..308575d 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -3220,10 +3220,6 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
if (j == conf->copies) {
/* Cannot recover, so abort the recovery or
* record a bad block */
- put_buf(r10_bio);
- if (rb2)
- atomic_dec(&rb2->remaining);
- r10_bio = rb2;
if (any_working) {
/* problem is that there are bad blocks
* on other device(s)
@@ -3255,6 +3251,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
mirror->recovery_disabled
= mddev->recovery_disabled;
}
+ put_buf(r10_bio);
+ if (rb2)
+ atomic_dec(&rb2->remaining);
+ r10_bio = rb2;
break;
}
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
commit f92f455f67fef27929e6043499414605b0c94872 upstream.
{,set}page_address() are macros if WANT_PAGE_VIRTUAL. If
!WANT_PAGE_VIRTUAL, they're plain C functions.
If someone calls them with a void *, this pointer is auto-converted to
struct page * if !WANT_PAGE_VIRTUAL, but causes a build failure on
architectures using WANT_PAGE_VIRTUAL (arc, m68k and sparc64):
drivers/md/bcache/bset.c: In function `__btree_sort':
drivers/md/bcache/bset.c:1190: warning: dereferencing `void *' pointer
drivers/md/bcache/bset.c:1190: error: request for member `virtual' in something not a structure or union
Convert them to static inline functions to fix this. There are already
plenty of users of struct page members inside <linux/mm.h>, so there's
no reason to keep them as macros.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Tested-by: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/mm.h | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index f022460..a6154b1 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -769,11 +769,14 @@ static __always_inline void *lowmem_page_address(const struct page *page)
#endif
#if defined(WANT_PAGE_VIRTUAL)
-#define page_address(page) ((page)->virtual)
-#define set_page_address(page, address) \
- do { \
- (page)->virtual = (address); \
- } while(0)
+static inline void *page_address(const struct page *page)
+{
+ return page->virtual;
+}
+static inline void set_page_address(struct page *page, void *address)
+{
+ page->virtual = address;
+}
#define page_address_init() do { } while(0)
#endif
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit b9a758a8c905fc59e783ae91ad645452d877ea88 upstream.
The initial USB driver did not use some register save locations in the
private data storage. To save some memory, a union was used to overlay these
variables with USB I/O components. In an update of the gain-control code,
these register save locations are now needed for USB drivers.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/wifi.h | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 224cf61..e576a927 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1035,6 +1035,7 @@ struct rtl_ht_agg {
struct rssi_sta {
long undec_sm_pwdb;
+ long undec_sm_cck;
};
struct rtl_tid_data {
@@ -1325,8 +1326,10 @@ struct fast_ant_training {
struct rtl_dm {
/*PHY status for Dynamic Management */
long entry_min_undec_sm_pwdb;
+ long undec_sm_cck;
long undec_sm_pwdb; /*out dm */
long entry_max_undec_sm_pwdb;
+ s32 ofdm_pkt_cnt;
bool dm_initialgain_enable;
bool dynamic_txpower_enable;
bool current_turbo_edca;
@@ -1341,6 +1344,7 @@ struct rtl_dm {
bool inform_fw_driverctrldm;
bool current_mrc_switch;
u8 txpowercount;
+ u8 powerindex_backup[6];
u8 thermalvalue_rxgain;
u8 thermalvalue_iqk;
@@ -1352,7 +1356,9 @@ struct rtl_dm {
bool done_txpower;
u8 dynamic_txhighpower_lvl; /*Tx high power level */
u8 dm_flag; /*Indicate each dynamic mechanism's status. */
+ u8 dm_flag_tmp;
u8 dm_type;
+ u8 dm_rssi_sel;
u8 txpower_track_control;
bool interrupt_migration;
bool disable_tx_int;
@@ -1951,6 +1957,7 @@ struct dig_t {
u8 pre_ccastate;
u8 cur_ccasate;
u8 large_fa_hit;
+ u8 dig_dynamic_min;
u8 forbidden_igi;
u8 dig_state;
u8 dig_highpwrstate;
@@ -2031,22 +2038,15 @@ struct rtl_priv {
struct dig_t dm_digtable;
struct ps_t dm_pstable;
- /* section shared by individual drivers */
- union {
- struct { /* data buffer pointer for USB reads */
- __le32 *usb_data;
- int usb_data_index;
- bool initialized;
- };
- struct { /* section for 8723ae */
- bool reg_init; /* true if regs saved */
- u32 reg_874;
- u32 reg_c70;
- u32 reg_85c;
- u32 reg_a74;
- bool bt_operation_on;
- };
- };
+ u32 reg_874;
+ u32 reg_c70;
+ u32 reg_85c;
+ u32 reg_a74;
+ bool reg_init; /* true if regs saved */
+ bool bt_operation_on;
+ __le32 *usb_data;
+ int usb_data_index;
+ bool initialized;
bool enter_ps; /* true when entering PS */
u8 rate_mask[5];
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 62009b7f12793c932aaba0df946b04cb4a77d022 upstream.
Vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404 introduced
new firmware for these chips. The code try for the new file, and fall back to
the original firmware if the new file is not available.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/core.c | 10 ++++++++++
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 16 +++++++++++++---
drivers/net/wireless/rtlwifi/wifi.h | 1 +
3 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 733b7ce..0f12cd3 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -46,10 +46,20 @@ void rtl_fw_cb(const struct firmware *firmware, void *context)
"Firmware callback routine entered!\n");
complete(&rtlpriv->firmware_loading_complete);
if (!firmware) {
+ if (rtlpriv->cfg->alt_fw_name) {
+ err = request_firmware(&firmware,
+ rtlpriv->cfg->alt_fw_name,
+ rtlpriv->io.dev);
+ pr_info("Loading alternative firmware %s\n",
+ rtlpriv->cfg->alt_fw_name);
+ if (!err)
+ goto found_alt;
+ }
pr_err("Firmware %s not available\n", rtlpriv->cfg->fw_name);
rtlpriv->max_fw_size = 0;
return;
}
+found_alt:
if (firmware->size > rtlpriv->max_fw_size) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Firmware is too big!\n");
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 2bd5985..a5a1901 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -49,6 +49,9 @@ MODULE_AUTHOR("Larry Finger <[email protected]>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n USB wireless");
MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
+MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
{
@@ -68,14 +71,21 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
"Can't alloc buffer for fw\n");
return 1;
}
-
+ if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) &&
+ !IS_92C_SERIAL(rtlpriv->rtlhal.version)) {
+ rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cufw_A.bin";
+ } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlpriv->rtlhal.version)) {
+ rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cufw_B.bin";
+ } else {
+ rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cufw_TMSC.bin";
+ }
+ /* provide name of alternative file */
+ rtlpriv->cfg->alt_fw_name = "rtlwifi/rtl8192cufw.bin";
pr_info("Loading firmware %s\n", rtlpriv->cfg->fw_name);
rtlpriv->max_fw_size = 0x4000;
err = request_firmware_nowait(THIS_MODULE, 1,
rtlpriv->cfg->fw_name, rtlpriv->io.dev,
GFP_KERNEL, hw, rtl_fw_cb);
-
-
return err;
}
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index ad9c37a..224cf61 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1806,6 +1806,7 @@ struct rtl_hal_cfg {
bool write_readback;
char *name;
char *fw_name;
+ char *alt_fw_name;
struct rtl_hal_ops *ops;
struct rtl_mod_params *mod_params;
struct rtl_hal_usbint_cfg *usb_interface_cfg;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit 5ac64ba12aca3bef18e61c866583155a3bbf81c4 upstream.
As the dvb-frontend kthread can be called anytime, it can race
with some get status ioctl. So, it seems better to avoid one to
race with the other while reading a 32 bits register.
I can't see any other reason for having a mutex there at I2C, except
to provide such kind of protection, as the I2C core already has a
mutex to protect I2C transfers.
Note: instead of this approach, it could eventually remove the dib8000
specific mutex for it, and either group the 4 ops into one xfer or
to manually control the I2C mutex. The main advantage of the current
approach is that the changes are smaller and more puntual.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Acked-by: Patrick Boettcher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb-frontends/dib8000.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 487c253..ccac846 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -157,15 +157,10 @@ static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
return ret;
}
-static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
+static u16 __dib8000_read_word(struct dib8000_state *state, u16 reg)
{
u16 ret;
- if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
- dprintk("could not acquire lock");
- return 0;
- }
-
state->i2c_write_buffer[0] = reg >> 8;
state->i2c_write_buffer[1] = reg & 0xff;
@@ -183,6 +178,21 @@ static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
dprintk("i2c read error on %d", reg);
ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+
+ return ret;
+}
+
+static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
+{
+ u16 ret;
+
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
+ ret = __dib8000_read_word(state, reg);
+
mutex_unlock(&state->i2c_buffer_lock);
return ret;
@@ -192,8 +202,15 @@ static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
{
u16 rw[2];
- rw[0] = dib8000_read_word(state, reg + 0);
- rw[1] = dib8000_read_word(state, reg + 1);
+ if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+ dprintk("could not acquire lock");
+ return 0;
+ }
+
+ rw[0] = __dib8000_read_word(state, reg + 0);
+ rw[1] = __dib8000_read_word(state, reg + 1);
+
+ mutex_unlock(&state->i2c_buffer_lock);
return ((rw[0] << 16) | (rw[1]));
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 770bd4bf2e664939a9dacd3d26ec9ff7a3933210 upstream.
The lack of comma leads to the wrong channel for an SPDIF channel.
Unfortunately this wasn't caught by compiler because it's still a
valid expression.
Reported-by: Alexander Aristov <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/rme9652/rme9652.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index b96d9e1..3717f2d 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -285,7 +285,7 @@ static char channel_map_9636_ds[26] = {
/* ADAT channels are remapped */
1, 3, 5, 7, 9, 11, 13, 15,
/* channels 8 and 9 are S/PDIF */
- 24, 25
+ 24, 25,
/* others don't exist */
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit 16961b042db8cc5cf75d782b4255193ad56e1d4f upstream.
As additional members are added to the dm_thin_new_mapping structure
care should be taken to make sure they get initialized before use.
Signed-off-by: Mike Snitzer <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-thin.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 38c8a5f..754026b 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -751,13 +751,17 @@ static int ensure_next_mapping(struct pool *pool)
static struct dm_thin_new_mapping *get_next_mapping(struct pool *pool)
{
- struct dm_thin_new_mapping *r = pool->next_mapping;
+ struct dm_thin_new_mapping *m = pool->next_mapping;
BUG_ON(!pool->next_mapping);
+ memset(m, 0, sizeof(struct dm_thin_new_mapping));
+ INIT_LIST_HEAD(&m->list);
+ m->bio = NULL;
+
pool->next_mapping = NULL;
- return r;
+ return m;
}
static void schedule_copy(struct thin_c *tc, dm_block_t virt_block,
@@ -769,15 +773,10 @@ static void schedule_copy(struct thin_c *tc, dm_block_t virt_block,
struct pool *pool = tc->pool;
struct dm_thin_new_mapping *m = get_next_mapping(pool);
- INIT_LIST_HEAD(&m->list);
- m->quiesced = 0;
- m->prepared = 0;
m->tc = tc;
m->virt_block = virt_block;
m->data_block = data_dest;
m->cell = cell;
- m->err = 0;
- m->bio = NULL;
if (!dm_deferred_set_add_work(pool->shared_read_ds, &m->list))
m->quiesced = 1;
@@ -840,15 +839,12 @@ static void schedule_zero(struct thin_c *tc, dm_block_t virt_block,
struct pool *pool = tc->pool;
struct dm_thin_new_mapping *m = get_next_mapping(pool);
- INIT_LIST_HEAD(&m->list);
m->quiesced = 1;
m->prepared = 0;
m->tc = tc;
m->virt_block = virt_block;
m->data_block = data_block;
m->cell = cell;
- m->err = 0;
- m->bio = NULL;
/*
* If the whole block of data is being overwritten or we are not
@@ -1039,7 +1035,6 @@ static void process_discard(struct thin_c *tc, struct bio *bio)
m->data_block = lookup_result.block;
m->cell = cell;
m->cell2 = cell2;
- m->err = 0;
m->bio = bio;
if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list)) {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit 8b64e881eb40ac8b9bfcbce068a97eef819044ee upstream.
The pool mode must not be switched until after the corresponding pool
process_* methods have been established. Otherwise, because
set_pool_mode() isn't interlocked with the IO path for performance
reasons, the IO path can end up executing process_* operations that
don't match the mode. This patch eliminates problems like the following
(as seen on really fast PCIe SSD storage when transitioning the pool's
mode from PM_READ_ONLY to PM_WRITE):
kernel: device-mapper: thin: 253:2: reached low water mark for data device: sending event.
kernel: device-mapper: thin: 253:2: no free data space available.
kernel: device-mapper: thin: 253:2: switching pool to read-only mode
kernel: device-mapper: thin: 253:2: switching pool to write mode
kernel: ------------[ cut here ]------------
kernel: WARNING: CPU: 11 PID: 7564 at drivers/md/dm-thin.c:995 handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]()
...
kernel: Workqueue: dm-thin do_worker [dm_thin_pool]
kernel: 00000000000003e3 ffff880308831cc8 ffffffff8152ebcb 00000000000003e3
kernel: 0000000000000000 ffff880308831d08 ffffffff8104c46c ffff88032502a800
kernel: ffff880036409000 ffff88030ec7ce00 0000000000000001 00000000ffffffc3
kernel: Call Trace:
kernel: [<ffffffff8152ebcb>] dump_stack+0x49/0x5e
kernel: [<ffffffff8104c46c>] warn_slowpath_common+0x8c/0xc0
kernel: [<ffffffff8104c4ba>] warn_slowpath_null+0x1a/0x20
kernel: [<ffffffffa001e2c6>] handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]
kernel: [<ffffffffa001f276>] process_bio_read_only+0x136/0x180 [dm_thin_pool]
kernel: [<ffffffffa0020b75>] process_deferred_bios+0xc5/0x230 [dm_thin_pool]
kernel: [<ffffffffa0020d31>] do_worker+0x51/0x60 [dm_thin_pool]
kernel: [<ffffffff81067823>] process_one_work+0x183/0x490
kernel: [<ffffffff81068c70>] worker_thread+0x120/0x3a0
kernel: [<ffffffff81068b50>] ? manage_workers+0x160/0x160
kernel: [<ffffffff8106e86e>] kthread+0xce/0xf0
kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70
kernel: [<ffffffff8153b3ec>] ret_from_fork+0x7c/0xb0
kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70
kernel: ---[ end trace 3f00528e08ffa55c ]---
kernel: device-mapper: thin: pool mode is PM_WRITE not PM_READ_ONLY like expected!?
dm-thin.c:995 was the WARN_ON_ONCE(get_pool_mode(pool) != PM_READ_ONLY);
at the top of handle_unserviceable_bio(). And as the additional
debugging I had conveys: the pool mode was _not_ PM_READ_ONLY like
expected, it was already PM_WRITE, yet pool->process_bio was still set
to process_bio_read_only().
Also, while fixing this up, reduce logging of redundant pool mode
transitions by checking new_mode is different from old_mode.
Signed-off-by: Mike Snitzer <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-thin.c | 41 +++++++++++++++++++++++++++++------------
1 file changed, 29 insertions(+), 12 deletions(-)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 18a9b12..0a9b087 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -1387,15 +1387,16 @@ static enum pool_mode get_pool_mode(struct pool *pool)
return pool->pf.mode;
}
-static void set_pool_mode(struct pool *pool, enum pool_mode mode)
+static void set_pool_mode(struct pool *pool, enum pool_mode new_mode)
{
int r;
+ enum pool_mode old_mode = pool->pf.mode;
- pool->pf.mode = mode;
-
- switch (mode) {
+ switch (new_mode) {
case PM_FAIL:
- DMERR("switching pool to failure mode");
+ if (old_mode != new_mode)
+ DMERR("%s: switching pool to failure mode",
+ dm_device_name(pool->pool_md));
dm_pool_metadata_read_only(pool->pmd);
pool->process_bio = process_bio_fail;
pool->process_discard = process_bio_fail;
@@ -1404,11 +1405,15 @@ static void set_pool_mode(struct pool *pool, enum pool_mode mode)
break;
case PM_READ_ONLY:
- DMERR("switching pool to read-only mode");
+ if (old_mode != new_mode)
+ DMERR("%s: switching pool to read-only mode",
+ dm_device_name(pool->pool_md));
r = dm_pool_abort_metadata(pool->pmd);
if (r) {
- DMERR("aborting transaction failed");
- set_pool_mode(pool, PM_FAIL);
+ DMERR("%s: aborting transaction failed",
+ dm_device_name(pool->pool_md));
+ new_mode = PM_FAIL;
+ set_pool_mode(pool, new_mode);
} else {
dm_pool_metadata_read_only(pool->pmd);
pool->process_bio = process_bio_read_only;
@@ -1419,6 +1424,9 @@ static void set_pool_mode(struct pool *pool, enum pool_mode mode)
break;
case PM_WRITE:
+ if (old_mode != new_mode)
+ DMINFO("%s: switching pool to write mode",
+ dm_device_name(pool->pool_md));
dm_pool_metadata_read_write(pool->pmd);
pool->process_bio = process_bio;
pool->process_discard = process_discard;
@@ -1426,6 +1434,8 @@ static void set_pool_mode(struct pool *pool, enum pool_mode mode)
pool->process_prepared_discard = process_prepared_discard;
break;
}
+
+ pool->pf.mode = new_mode;
}
/*----------------------------------------------------------------*/
@@ -1642,6 +1652,17 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti)
enum pool_mode new_mode = pt->adjusted_pf.mode;
/*
+ * Don't change the pool's mode until set_pool_mode() below.
+ * Otherwise the pool's process_* function pointers may
+ * not match the desired pool mode.
+ */
+ pt->adjusted_pf.mode = old_mode;
+
+ pool->ti = ti;
+ pool->pf = pt->adjusted_pf;
+ pool->low_water_blocks = pt->low_water_blocks;
+
+ /*
* If we were in PM_FAIL mode, rollback of metadata failed. We're
* not going to recover without a thin_repair. So we never let the
* pool move out of the old mode. On the other hand a PM_READ_ONLY
@@ -1651,10 +1672,6 @@ static int bind_control_target(struct pool *pool, struct dm_target *ti)
if (old_mode == PM_FAIL)
new_mode = old_mode;
- pool->ti = ti;
- pool->low_water_blocks = pt->low_water_blocks;
- pool->pf = pt->adjusted_pf;
-
set_pool_mode(pool, new_mode);
return 0;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg <[email protected]>
commit 483c319188c74e82b29a0ed7a7fa7065570f2193 upstream.
Commit cddb339badb0 (spi/pxa2xx: convert to dma_request_slave_channel_compat())
converted the driver to use ACPI provided DMA helpers but it forgot to
initialize the platform data for the channels to -1. Failing to do so will
result inadvertent match in the filter function because 0 is a valid
channel number.
Prevent this from happening by initializing both platform data channels
correctly to -1.
Fixes: cddb339badb0 (spi/pxa2xx: convert to dma_request_slave_channel_compat())
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/spi/spi-pxa2xx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 46e481f..b0e1331 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1064,6 +1064,8 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
pdata->num_chipselect = 1;
pdata->enable_dma = true;
+ pdata->tx_chan_id = -1;
+ pdata->rx_chan_id = -1;
return pdata;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit a4c35ed241129dd142be4cadb1e5a474a56d5464 upstream.
The synchronization needed after ftrace_ops are unregistered must happen
after the callback is disabled from becing called by functions.
The current location happens after the function is being removed from the
internal lists, but not after the function callbacks were disabled, leaving
the functions susceptible of being called after their callbacks are freed.
This affects perf and any externel users of function tracing (LTTng and
SystemTap).
Fixes: cdbe61bfe704 "ftrace: Allow dynamically allocated function tracers"
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/ftrace.c | 58 ++++++++++++++++++++++++++++-----------------------
1 file changed, 32 insertions(+), 26 deletions(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index f1dd607..c984033 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -439,20 +439,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
} else if (ops->flags & FTRACE_OPS_FL_CONTROL) {
ret = remove_ftrace_list_ops(&ftrace_control_list,
&control_ops, ops);
- if (!ret) {
- /*
- * The ftrace_ops is now removed from the list,
- * so there'll be no new users. We must ensure
- * all current users are done before we free
- * the control data.
- * Note synchronize_sched() is not enough, as we
- * use preempt_disable() to do RCU, but the function
- * tracer can be called where RCU is not active
- * (before user_exit()).
- */
- schedule_on_each_cpu(ftrace_sync);
- control_ops_free(ops);
- }
} else
ret = remove_ftrace_ops(&ftrace_ops_list, ops);
@@ -462,17 +448,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops)
if (ftrace_enabled)
update_ftrace_function();
- /*
- * Dynamic ops may be freed, we must make sure that all
- * callers are done before leaving this function.
- *
- * Again, normal synchronize_sched() is not good enough.
- * We need to do a hard force of sched synchronization.
- */
- if (ops->flags & FTRACE_OPS_FL_DYNAMIC)
- schedule_on_each_cpu(ftrace_sync);
-
-
return 0;
}
@@ -2141,10 +2116,41 @@ static int ftrace_shutdown(struct ftrace_ops *ops, int command)
command |= FTRACE_UPDATE_TRACE_FUNC;
}
- if (!command || !ftrace_enabled)
+ if (!command || !ftrace_enabled) {
+ /*
+ * If these are control ops, they still need their
+ * per_cpu field freed. Since, function tracing is
+ * not currently active, we can just free them
+ * without synchronizing all CPUs.
+ */
+ if (ops->flags & FTRACE_OPS_FL_CONTROL)
+ control_ops_free(ops);
return 0;
+ }
ftrace_run_update_code(command);
+
+ /*
+ * Dynamic ops may be freed, we must make sure that all
+ * callers are done before leaving this function.
+ * The same goes for freeing the per_cpu data of the control
+ * ops.
+ *
+ * Again, normal synchronize_sched() is not good enough.
+ * We need to do a hard force of sched synchronization.
+ * This is because we use preempt_disable() to do RCU, but
+ * the function tracers can be called where RCU is not watching
+ * (like before user_exit()). We can not rely on the RCU
+ * infrastructure to do the synchronization, thus we must do it
+ * ourselves.
+ */
+ if (ops->flags & (FTRACE_OPS_FL_DYNAMIC | FTRACE_OPS_FL_CONTROL)) {
+ schedule_on_each_cpu(ftrace_sync);
+
+ if (ops->flags & FTRACE_OPS_FL_CONTROL)
+ control_ops_free(ops);
+ }
+
return 0;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Chen <[email protected]>
commit feffe09f510c475df082546815f9e4a573f6a233 upstream.
According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB
register error issue", All USB register write operations must
use the ARM SWP instruction. So, we implement a special ehci_write
for imx28.
Discussion for it at below:
http://marc.info/?l=linux-usb&m=137996395529294&w=2
Without this patcheset, imx28 works unstable at high AHB bus loading.
If the bus loading is not high, the imx28 usb can work well at the most
of time. There is a IC errata for this problem, usually, we consider
IC errata is a problem not a new feature, and this workaround is needed
for that, so we need to add them to stable tree 3.11+.
Cc: [email protected]
Signed-off-by: Peter Chen <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Tested-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/host/ehci.h | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 64f9a08..77b34cf 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -200,6 +200,7 @@ struct ehci_hcd { /* one per controller */
unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
unsigned need_oc_pp_cycle:1; /* MPC834X port power */
+ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
/* required for usb32 quirk */
#define OHCI_CTRL_HCFS (3 << 6)
@@ -675,6 +676,18 @@ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
#endif
}
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ehci_writel(const unsigned int val,
+ volatile __u32 __iomem *addr)
+{
+ __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ehci_writel(const unsigned int val,
+ volatile __u32 __iomem *addr)
+{
+}
+#endif
static inline void ehci_writel(const struct ehci_hcd *ehci,
const unsigned int val, __u32 __iomem *regs)
{
@@ -683,7 +696,10 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
writel_be(val, regs) :
writel(val, regs);
#else
- writel(val, regs);
+ if (ehci->imx28_write_fix)
+ imx28_ehci_writel(val, regs);
+ else
+ writel(val, regs);
#endif
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: AKASHI Takahiro <[email protected]>
commit 06bdadd7634551cfe8ce071fe44d0311b3033d9e upstream.
audit_syscall_exit() saves a result of regs_return_value() in intermediate
"int" variable and passes it to __audit_syscall_exit(), which expects its
second argument as a "long" value. This will result in truncating the
value returned by a system call and making a wrong audit record.
I don't know why gcc compiler doesn't complain about this, but anyway it
causes a problem at runtime on arm64 (and probably most 64-bit archs).
Signed-off-by: AKASHI Takahiro <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Eric Paris <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Eric Paris <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/audit.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 729a4d1..4fb28b2 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -135,7 +135,7 @@ static inline void audit_syscall_exit(void *pt_regs)
{
if (unlikely(current->audit_context)) {
int success = is_syscall_success(pt_regs);
- int return_code = regs_return_value(pt_regs);
+ long return_code = regs_return_value(pt_regs);
__audit_syscall_exit(success, return_code);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Lior Amsalem <[email protected]>
commit 9013d64e661fc2a37a1742670202171c27fef4b5 upstream.
On Armada 370/XP SoCs, once a disk is removed from a SATA port, then the
re-plug events are not detected by the sata_mv driver. This patch fixes
the issue by updating the PHY speed in the LP_PHY_CTL register (0x58)
according to the SControl speed.
Note that this fix is only applied if the compatible string
"marvell,armada-370-sata" is found in the SATA DT node.
Fixes: 9ae6f740b49f ("arm: mach-mvebu: add support for Armada 370 and Armada XP with DT")
Signed-off-by: Lior Amsalem <[email protected]>
Signed-off-by: Nadav Haklai <[email protected]>
Signed-off-by: Simon Guinot <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Gregory Clement <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Acked-by: Jason Cooper <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/ata/sata_mv.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9258775..b256ff5 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -304,6 +304,7 @@ enum {
MV5_LTMODE = 0x30,
MV5_PHY_CTL = 0x0C,
SATA_IFCFG = 0x050,
+ LP_PHY_CTL = 0x058,
MV_M2_PREAMP_MASK = 0x7e0,
@@ -431,6 +432,7 @@ enum {
MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */
+ MV_HP_FIX_LP_PHY_CTL = (1 << 13), /* fix speed in LP_PHY_CTL ? */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
@@ -1353,6 +1355,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
if (ofs != 0xffffffffU) {
void __iomem *addr = mv_ap_base(link->ap) + ofs;
+ struct mv_host_priv *hpriv = link->ap->host->private_data;
if (sc_reg_in == SCR_CONTROL) {
/*
* Workaround for 88SX60x1 FEr SATA#26:
@@ -1369,6 +1372,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
*/
if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
val |= 0xf000;
+
+ if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) {
+ void __iomem *lp_phy_addr =
+ mv_ap_base(link->ap) + LP_PHY_CTL;
+ /*
+ * Set PHY speed according to SControl speed.
+ */
+ if ((val & 0xf0) == 0x10)
+ writelfl(0x7, lp_phy_addr);
+ else
+ writelfl(0x227, lp_phy_addr);
+ }
}
writelfl(val, addr);
return 0;
@@ -4111,6 +4126,15 @@ static int mv_platform_probe(struct platform_device *pdev)
if (rc)
goto err;
+ /*
+ * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be
+ * updated in the LP_PHY_CTL register.
+ */
+ if (pdev->dev.of_node &&
+ of_device_is_compatible(pdev->dev.of_node,
+ "marvell,armada-370-sata"))
+ hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL;
+
/* initialize adapter */
rc = mv_init_host(host);
if (rc)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Thornber <[email protected]>
commit fca028438fb903852beaf7c3fe1cd326651af57d upstream.
This bug was introduced in commit 7e664b3dec431e ("dm space map metadata:
fix extending the space map").
When extending a dm-thin metadata volume we:
- Switch the space map into a simple bootstrap mode, which allocates
all space linearly from the newly added space.
- Add new bitmap entries for the new space
- Increment the reference counts for those newly allocated bitmap
entries
- Commit changes to disk
- Switch back out of bootstrap mode.
But, the disk commit may allocate space itself, if so this fact will be
lost when switching out of bootstrap mode.
The bug exhibited itself as an error when the bitmap_root, with an
erroneous ref count of 0, was subsequently decremented as part of a
later disk commit. This would cause the disk commit to fail, and thinp
to enter read_only mode. The metadata was not damaged (thin_check
passed).
The fix is to put the increments + commit into a loop, running until
the commit has not allocated extra space. In practise this loop only
runs twice.
With this fix the following device mapper testsuite test passes:
dmtest run --suite thin-provisioning -n thin_remove_works_after_resize
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/persistent-data/dm-space-map-metadata.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c
index f04d92f..afb419e 100644
--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -617,13 +617,23 @@ static int sm_metadata_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
if (r)
goto out;
- for (i = old_len; !r && i < smm->begin; i++) {
- r = sm_ll_inc(&smm->ll, i, &ev);
+ /*
+ * We repeatedly increment then commit until the commit doesn't
+ * allocate any new blocks.
+ */
+ do {
+ for (i = old_len; !r && i < smm->begin; i++) {
+ r = sm_ll_inc(&smm->ll, i, &ev);
+ if (r)
+ goto out;
+ }
+ old_len = smm->begin;
+
+ r = sm_ll_commit(&smm->ll);
if (r)
goto out;
- }
- r = sm_metadata_commit(sm);
+ } while (old_len != smm->begin);
out:
/*
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 28a625cbc2a14f17b83e47ef907b2658576a32aa upstream.
Having this struct in module memory could Oops when if the module is
unloaded while the buffer still persists in a pipe.
Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal
merge them into nosteal_pipe_buf_ops (this is the same as
default_pipe_buf_ops except stealing the page from the buffer is not
allowed).
Reported-by: Al Viro <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/fuse/dev.c | 22 +++++-----------------
fs/splice.c | 18 ++++++++++++++++++
include/linux/pipe_fs_i.h | 2 ++
net/core/skbuff.c | 32 +-------------------------------
4 files changed, 26 insertions(+), 48 deletions(-)
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 1d55f94..23bf1a5 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1296,22 +1296,6 @@ static ssize_t fuse_dev_read(struct kiocb *iocb, const struct iovec *iov,
return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
}
-static int fuse_dev_pipe_buf_steal(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf)
-{
- return 1;
-}
-
-static const struct pipe_buf_operations fuse_dev_pipe_buf_ops = {
- .can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
- .confirm = generic_pipe_buf_confirm,
- .release = generic_pipe_buf_release,
- .steal = fuse_dev_pipe_buf_steal,
- .get = generic_pipe_buf_get,
-};
-
static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
struct pipe_inode_info *pipe,
size_t len, unsigned int flags)
@@ -1358,7 +1342,11 @@ static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
buf->page = bufs[page_nr].page;
buf->offset = bufs[page_nr].offset;
buf->len = bufs[page_nr].len;
- buf->ops = &fuse_dev_pipe_buf_ops;
+ /*
+ * Need to be careful about this. Having buf->ops in module
+ * code can Oops if the buffer persists after module unload.
+ */
+ buf->ops = &nosteal_pipe_buf_ops;
pipe->nrbufs++;
page_nr++;
diff --git a/fs/splice.c b/fs/splice.c
index 3b7ee65..84f810d 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -555,6 +555,24 @@ static const struct pipe_buf_operations default_pipe_buf_ops = {
.get = generic_pipe_buf_get,
};
+static int generic_pipe_buf_nosteal(struct pipe_inode_info *pipe,
+ struct pipe_buffer *buf)
+{
+ return 1;
+}
+
+/* Pipe buffer operations for a socket and similar. */
+const struct pipe_buf_operations nosteal_pipe_buf_ops = {
+ .can_merge = 0,
+ .map = generic_pipe_buf_map,
+ .unmap = generic_pipe_buf_unmap,
+ .confirm = generic_pipe_buf_confirm,
+ .release = generic_pipe_buf_release,
+ .steal = generic_pipe_buf_nosteal,
+ .get = generic_pipe_buf_get,
+};
+EXPORT_SYMBOL(nosteal_pipe_buf_ops);
+
static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
unsigned long vlen, loff_t offset)
{
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index b8809fe..ab57526 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -157,6 +157,8 @@ int generic_pipe_buf_confirm(struct pipe_inode_info *, struct pipe_buffer *);
int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
+extern const struct pipe_buf_operations nosteal_pipe_buf_ops;
+
/* for F_SETPIPE_SZ and F_GETPIPE_SZ */
long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
struct pipe_inode_info *get_pipe_info(struct file *file);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index b2cd9a4..290f73b 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -74,36 +74,6 @@
struct kmem_cache *skbuff_head_cache __read_mostly;
static struct kmem_cache *skbuff_fclone_cache __read_mostly;
-static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf)
-{
- put_page(buf->page);
-}
-
-static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf)
-{
- get_page(buf->page);
-}
-
-static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf)
-{
- return 1;
-}
-
-
-/* Pipe buffer operations for a socket. */
-static const struct pipe_buf_operations sock_pipe_buf_ops = {
- .can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
- .confirm = generic_pipe_buf_confirm,
- .release = sock_pipe_buf_release,
- .steal = sock_pipe_buf_steal,
- .get = sock_pipe_buf_get,
-};
-
/**
* skb_panic - private function for out-of-line support
* @skb: buffer
@@ -1800,7 +1770,7 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
.partial = partial,
.nr_pages_max = MAX_SKB_FRAGS,
.flags = flags,
- .ops = &sock_pipe_buf_ops,
+ .ops = &nosteal_pipe_buf_ops,
.spd_release = sock_spd_release,
};
struct sk_buff *frag_iter;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 4c3773eda49c872a3034382f8ec3080002e715bf upstream.
The test here is intended intended to prevent shift wrapping bugs when
we do "1U << idx2". We should consider the number of bits in a u32
instead of the number of bytes.
[fix another chunk similarly by tiwai]
Fixes: 7bb2491b35a2 ('ALSA: Add kconfig to specify the max card numbers')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/core/init.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/core/init.c b/sound/core/init.c
index 6b90871..d047851 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -170,7 +170,7 @@ int snd_card_create(int idx, const char *xid,
if (idx < 0) {
for (idx2 = 0; idx2 < SNDRV_CARDS; idx2++) {
/* idx == -1 == 0xffff means: take any free slot */
- if (idx2 < sizeof(int) && !(idx & (1U << idx2)))
+ if (idx2 < 32 && !(idx & (1U << idx2)))
continue;
if (!test_bit(idx2, snd_cards_lock)) {
if (module_slot_match(module, idx2)) {
@@ -183,7 +183,7 @@ int snd_card_create(int idx, const char *xid,
if (idx < 0) {
for (idx2 = 0; idx2 < SNDRV_CARDS; idx2++) {
/* idx == -1 == 0xffff means: take any free slot */
- if (idx2 < sizeof(int) && !(idx & (1U << idx2)))
+ if (idx2 < 32 && !(idx & (1U << idx2)))
continue;
if (!test_bit(idx2, snd_cards_lock)) {
if (!slots[idx2] || !*slots[idx2]) {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit 3132e107d608f8753240d82d61303c500fd515b4 upstream.
If trace_puts() is used very early in boot up, it can crash the machine
if it is called before the ring buffer is allocated. If a trace_printk()
is used with no arguments, then it will be converted into a trace_puts()
and suffer the same fate.
Fixes: 09ae72348ecc "tracing: Add trace_puts() for even faster trace_printk() tracing"
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/trace.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 878785b..f788ecf 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -435,6 +435,9 @@ int __trace_puts(unsigned long ip, const char *str, int size)
unsigned long irq_flags;
int alloc;
+ if (unlikely(tracing_selftest_running || tracing_disabled))
+ return 0;
+
alloc = sizeof(*entry) + size + 2; /* possible \n added */
local_save_flags(irq_flags);
@@ -475,6 +478,9 @@ int __trace_bputs(unsigned long ip, const char *str)
unsigned long irq_flags;
int size = sizeof(struct bputs_entry);
+ if (unlikely(tracing_selftest_running || tracing_disabled))
+ return 0;
+
local_save_flags(irq_flags);
buffer = global_trace.trace_buffer.buffer;
event = trace_buffer_lock_reserve(buffer, TRACE_BPUTS, size,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit ecc736fc3c71c411a9d201d8588c9e7e049e5d8c upstream.
Hugh has reported an endless loop when the hardlimit reclaim sees the
same group all the time. This might happen when the reclaim races with
the memcg removal.
shrink_zone
[rmdir root]
mem_cgroup_iter(root, NULL, reclaim)
// prev = NULL
rcu_read_lock()
mem_cgroup_iter_load
last_visited = iter->last_visited // gets root || NULL
css_tryget(last_visited) // failed
last_visited = NULL [1]
memcg = root = __mem_cgroup_iter_next(root, NULL)
mem_cgroup_iter_update
iter->last_visited = root;
reclaim->generation = iter->generation
mem_cgroup_iter(root, root, reclaim)
// prev = root
rcu_read_lock
mem_cgroup_iter_load
last_visited = iter->last_visited // gets root
css_tryget(last_visited) // failed
[1]
The issue seemed to be introduced by commit 5f5781619718 ("memcg: relax
memcg iter caching") which has replaced unconditional css_get/css_put by
css_tryget/css_put for the cached iterator.
This patch fixes the issue by skipping css_tryget on the root of the
tree walk in mem_cgroup_iter_load and symmetrically doesn't release it
in mem_cgroup_iter_update.
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Hugh Dickins <[email protected]>
Tested-by: Hugh Dickins <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Greg Thelen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
mm/memcontrol.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index b5f353f..bb13089 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1148,7 +1148,15 @@ mem_cgroup_iter_load(struct mem_cgroup_reclaim_iter *iter,
if (iter->last_dead_count == *sequence) {
smp_rmb();
position = iter->last_visited;
- if (position && !css_tryget(&position->css))
+
+ /*
+ * We cannot take a reference to root because we might race
+ * with root removal and returning NULL would end up in
+ * an endless loop on the iterator user level when root
+ * would be returned all the time.
+ */
+ if (position && position != root &&
+ !css_tryget(&position->css))
position = NULL;
}
return position;
@@ -1157,9 +1165,11 @@ mem_cgroup_iter_load(struct mem_cgroup_reclaim_iter *iter,
static void mem_cgroup_iter_update(struct mem_cgroup_reclaim_iter *iter,
struct mem_cgroup *last_visited,
struct mem_cgroup *new_position,
+ struct mem_cgroup *root,
int sequence)
{
- if (last_visited)
+ /* root reference counting symmetric to mem_cgroup_iter_load */
+ if (last_visited && last_visited != root)
css_put(&last_visited->css);
/*
* We store the sequence count from the time @last_visited was
@@ -1234,7 +1244,8 @@ struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *root,
memcg = __mem_cgroup_iter_next(root, last_visited);
if (reclaim) {
- mem_cgroup_iter_update(iter, last_visited, memcg, seq);
+ mem_cgroup_iter_update(iter, last_visited, memcg, root,
+ seq);
if (!memcg)
iter->generation++;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit 592f6b842f64e416c7598a1b97c649b34241e22d upstream.
Commit 91c2e0bcae72 ("unify compat fanotify_mark(2), switch to
COMPAT_SYSCALL_DEFINE") added a new unified compat fanotify_mark syscall
to be used by all architectures.
Unfortunately the unified version merges the split mask parameter in a
wrong way: the lower and higher word got swapped.
This was discovered with glibc's tst-fanotify test case.
Signed-off-by: Heiko Carstens <[email protected]>
Reported-by: Andreas Krebbel <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Acked-by: "David S. Miller" <[email protected]>
Acked-by: Al Viro <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ralf Baechle <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/notify/fanotify/fanotify_user.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index e44cb64..6663511 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -888,9 +888,9 @@ COMPAT_SYSCALL_DEFINE6(fanotify_mark,
{
return sys_fanotify_mark(fanotify_fd, flags,
#ifdef __BIG_ENDIAN
- ((__u64)mask1 << 32) | mask0,
-#else
((__u64)mask0 << 32) | mask1,
+#else
+ ((__u64)mask1 << 32) | mask0,
#endif
dfd, pathname);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit e9a321c6b2ac954a7dbf235f419c255a424a1273 upstream.
DCE5 and newer hardware only has 1 DAC. Use the correct
offset. This may fix display problems on certain board
configurations.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/evergreen.c | 4 ++--
drivers/gpu/drm/radeon/si.c | 2 +-
drivers/gpu/drm/radeon/sid.h | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 8307883..18ae744 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4182,8 +4182,8 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev)
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
- /* only one DAC on DCE6 */
- if (!ASIC_IS_DCE6(rdev))
+ /* only one DAC on DCE5 */
+ if (!ASIC_IS_DCE5(rdev))
WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
WREG32(DACB_AUTODETECT_INT_CONTROL, 0);
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 0da5449..9e04414 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5639,7 +5639,7 @@ static void si_disable_interrupt_state(struct radeon_device *rdev)
}
if (!ASIC_IS_NODCE(rdev)) {
- WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
+ WREG32(DAC_AUTODETECT_INT_CONTROL, 0);
tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
WREG32(DC_HPD1_INT_CONTROL, tmp);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index 60e6ad7..0b55877 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -719,7 +719,7 @@
# define GRPH_PFLIP_INT_MASK (1 << 0)
# define GRPH_PFLIP_INT_TYPE (1 << 8)
-#define DACA_AUTODETECT_INT_CONTROL 0x66c8
+#define DAC_AUTODETECT_INT_CONTROL 0x67c8
#define DC_HPD1_INT_STATUS 0x601c
#define DC_HPD2_INT_STATUS 0x6028
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Arcangeli <[email protected]>
commit 27c73ae759774e63313c1fbfeb17ba076cea64c5 upstream.
Commit 7cb2ef56e6a8 ("mm: fix aio performance regression for database
caused by THP") can cause dereference of a dangling pointer if
split_huge_page runs during PageHuge() if there are updates to the
tail_page->private field.
Also it is repeating compound_head twice for hugetlbfs and it is running
compound_head+compound_trans_head for THP when a single one is needed in
both cases.
The new code within the PageSlab() check doesn't need to verify that the
THP page size is never bigger than the smallest hugetlbfs page size, to
avoid memory corruption.
A longstanding theoretical race condition was found while fixing the
above (see the change right after the skip_unlock label, that is
relevant for the compound_lock path too).
By re-establishing the _mapcount tail refcounting for all compound
pages, this also fixes the below problem:
echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
BUG: Bad page state in process bash pfn:59a01
page:ffffea000139b038 count:0 mapcount:10 mapping: (null) index:0x0
page flags: 0x1c00000000008000(tail)
Modules linked in:
CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x55/0x76
bad_page+0xd5/0x130
free_pages_prepare+0x213/0x280
__free_pages+0x36/0x80
update_and_free_page+0xc1/0xd0
free_pool_huge_page+0xc2/0xe0
set_max_huge_pages.part.58+0x14c/0x220
nr_hugepages_store_common.isra.60+0xd0/0xf0
nr_hugepages_store+0x13/0x20
kobj_attr_store+0xf/0x20
sysfs_write_file+0x189/0x1e0
vfs_write+0xc5/0x1f0
SyS_write+0x55/0xb0
system_call_fastpath+0x16/0x1b
Signed-off-by: Khalid Aziz <[email protected]>
Signed-off-by: Andrea Arcangeli <[email protected]>
Tested-by: Khalid Aziz <[email protected]>
Cc: Pravin Shelar <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Ben Hutchings <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Minchan Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Guillaume Morin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/hugetlb.h | 6 ++
mm/hugetlb.c | 17 ++++++
mm/swap.c | 143 ++++++++++++++++++++++++++++--------------------
3 files changed, 106 insertions(+), 60 deletions(-)
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index c2b1801..b92dca8 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -31,6 +31,7 @@ struct hugepage_subpool *hugepage_new_subpool(long nr_blocks);
void hugepage_put_subpool(struct hugepage_subpool *spool);
int PageHuge(struct page *page);
+int PageHeadHuge(struct page *page_head);
void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
@@ -101,6 +102,11 @@ static inline int PageHuge(struct page *page)
return 0;
}
+static inline int PageHeadHuge(struct page *page_head)
+{
+ return 0;
+}
+
static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
{
}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index b60f330..4cf641f 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -690,6 +690,23 @@ int PageHuge(struct page *page)
}
EXPORT_SYMBOL_GPL(PageHuge);
+/*
+ * PageHeadHuge() only returns true for hugetlbfs head page, but not for
+ * normal or transparent huge pages.
+ */
+int PageHeadHuge(struct page *page_head)
+{
+ compound_page_dtor *dtor;
+
+ if (!PageHead(page_head))
+ return 0;
+
+ dtor = get_compound_page_dtor(page_head);
+
+ return dtor == free_huge_page;
+}
+EXPORT_SYMBOL_GPL(PageHeadHuge);
+
pgoff_t __basepage_index(struct page *page)
{
struct page *page_head = compound_head(page);
diff --git a/mm/swap.c b/mm/swap.c
index c899502..1e5b6c6 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -82,19 +82,6 @@ static void __put_compound_page(struct page *page)
static void put_compound_page(struct page *page)
{
- /*
- * hugetlbfs pages cannot be split from under us. If this is a
- * hugetlbfs page, check refcount on head page and release the page if
- * the refcount becomes zero.
- */
- if (PageHuge(page)) {
- page = compound_head(page);
- if (put_page_testzero(page))
- __put_compound_page(page);
-
- return;
- }
-
if (unlikely(PageTail(page))) {
/* __split_huge_page_refcount can run under us */
struct page *page_head = compound_trans_head(page);
@@ -111,14 +98,31 @@ static void put_compound_page(struct page *page)
* still hot on arches that do not support
* this_cpu_cmpxchg_double().
*/
- if (PageSlab(page_head)) {
- if (PageTail(page)) {
+ if (PageSlab(page_head) || PageHeadHuge(page_head)) {
+ if (likely(PageTail(page))) {
+ /*
+ * __split_huge_page_refcount
+ * cannot race here.
+ */
+ VM_BUG_ON(!PageHead(page_head));
+ atomic_dec(&page->_mapcount);
if (put_page_testzero(page_head))
VM_BUG_ON(1);
-
- atomic_dec(&page->_mapcount);
- goto skip_lock_tail;
+ if (put_page_testzero(page_head))
+ __put_compound_page(page_head);
+ return;
} else
+ /*
+ * __split_huge_page_refcount
+ * run before us, "page" was a
+ * THP tail. The split
+ * page_head has been freed
+ * and reallocated as slab or
+ * hugetlbfs page of smaller
+ * order (only possible if
+ * reallocated as slab on
+ * x86).
+ */
goto skip_lock;
}
/*
@@ -132,8 +136,27 @@ static void put_compound_page(struct page *page)
/* __split_huge_page_refcount run before us */
compound_unlock_irqrestore(page_head, flags);
skip_lock:
- if (put_page_testzero(page_head))
- __put_single_page(page_head);
+ if (put_page_testzero(page_head)) {
+ /*
+ * The head page may have been
+ * freed and reallocated as a
+ * compound page of smaller
+ * order and then freed again.
+ * All we know is that it
+ * cannot have become: a THP
+ * page, a compound page of
+ * higher order, a tail page.
+ * That is because we still
+ * hold the refcount of the
+ * split THP tail and
+ * page_head was the THP head
+ * before the split.
+ */
+ if (PageHead(page_head))
+ __put_compound_page(page_head);
+ else
+ __put_single_page(page_head);
+ }
out_put_single:
if (put_page_testzero(page))
__put_single_page(page);
@@ -155,7 +178,6 @@ out_put_single:
VM_BUG_ON(atomic_read(&page->_count) != 0);
compound_unlock_irqrestore(page_head, flags);
-skip_lock_tail:
if (put_page_testzero(page_head)) {
if (PageHead(page_head))
__put_compound_page(page_head);
@@ -198,51 +220,52 @@ bool __get_page_tail(struct page *page)
* proper PT lock that already serializes against
* split_huge_page().
*/
+ unsigned long flags;
bool got = false;
- struct page *page_head;
-
- /*
- * If this is a hugetlbfs page it cannot be split under us. Simply
- * increment refcount for the head page.
- */
- if (PageHuge(page)) {
- page_head = compound_head(page);
- atomic_inc(&page_head->_count);
- got = true;
- } else {
- unsigned long flags;
+ struct page *page_head = compound_trans_head(page);
- page_head = compound_trans_head(page);
- if (likely(page != page_head &&
- get_page_unless_zero(page_head))) {
-
- /* Ref to put_compound_page() comment. */
- if (PageSlab(page_head)) {
- if (likely(PageTail(page))) {
- __get_page_tail_foll(page, false);
- return true;
- } else {
- put_page(page_head);
- return false;
- }
- }
-
- /*
- * page_head wasn't a dangling pointer but it
- * may not be a head page anymore by the time
- * we obtain the lock. That is ok as long as it
- * can't be freed from under us.
- */
- flags = compound_lock_irqsave(page_head);
- /* here __split_huge_page_refcount won't run anymore */
+ if (likely(page != page_head && get_page_unless_zero(page_head))) {
+ /* Ref to put_compound_page() comment. */
+ if (PageSlab(page_head) || PageHeadHuge(page_head)) {
if (likely(PageTail(page))) {
+ /*
+ * This is a hugetlbfs page or a slab
+ * page. __split_huge_page_refcount
+ * cannot race here.
+ */
+ VM_BUG_ON(!PageHead(page_head));
__get_page_tail_foll(page, false);
- got = true;
- }
- compound_unlock_irqrestore(page_head, flags);
- if (unlikely(!got))
+ return true;
+ } else {
+ /*
+ * __split_huge_page_refcount run
+ * before us, "page" was a THP
+ * tail. The split page_head has been
+ * freed and reallocated as slab or
+ * hugetlbfs page of smaller order
+ * (only possible if reallocated as
+ * slab on x86).
+ */
put_page(page_head);
+ return false;
+ }
+ }
+
+ /*
+ * page_head wasn't a dangling pointer but it
+ * may not be a head page anymore by the time
+ * we obtain the lock. That is ok as long as it
+ * can't be freed from under us.
+ */
+ flags = compound_lock_irqsave(page_head);
+ /* here __split_huge_page_refcount won't run anymore */
+ if (likely(PageTail(page))) {
+ __get_page_tail_foll(page, false);
+ got = true;
}
+ compound_unlock_irqrestore(page_head, flags);
+ if (unlikely(!got))
+ put_page(page_head);
}
return got;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Paasch <[email protected]>
commit 77f99ad16a07aa062c2d30fae57b1fee456f6ef6 upstream.
Because the tcp-metrics is an RCU-list, it may be that two
soft-interrupts are inside __tcp_get_metrics() for the same
destination-IP at the same time. If this destination-IP is not yet part of
the tcp-metrics, both soft-interrupts will end up in tcpm_new and create
a new entry for this IP.
So, we will have two tcp-metrics with the same destination-IP in the list.
This patch checks twice __tcp_get_metrics(). First without holding the
lock, then while holding the lock. The second one is there to confirm
that the entry has not been added by another soft-irq while waiting for
the spin-lock.
Fixes: 51c5d0c4b169b (tcp: Maintain dynamic metrics in local cache.)
Signed-off-by: Christoph Paasch <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv4/tcp_metrics.c | 51 +++++++++++++++++++++++++++++++-------------------
1 file changed, 32 insertions(+), 19 deletions(-)
diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c
index 306dbd9..b500d2d 100644
--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -22,6 +22,9 @@
int sysctl_tcp_nometrics_save __read_mostly;
+static struct tcp_metrics_block *__tcp_get_metrics(const struct inetpeer_addr *addr,
+ struct net *net, unsigned int hash);
+
struct tcp_fastopen_metrics {
u16 mss;
u16 syn_loss:10; /* Recurring Fast Open SYN losses */
@@ -130,16 +133,41 @@ static void tcpm_suck_dst(struct tcp_metrics_block *tm, struct dst_entry *dst,
}
}
+#define TCP_METRICS_TIMEOUT (60 * 60 * HZ)
+
+static void tcpm_check_stamp(struct tcp_metrics_block *tm, struct dst_entry *dst)
+{
+ if (tm && unlikely(time_after(jiffies, tm->tcpm_stamp + TCP_METRICS_TIMEOUT)))
+ tcpm_suck_dst(tm, dst, false);
+}
+
+#define TCP_METRICS_RECLAIM_DEPTH 5
+#define TCP_METRICS_RECLAIM_PTR (struct tcp_metrics_block *) 0x1UL
+
static struct tcp_metrics_block *tcpm_new(struct dst_entry *dst,
struct inetpeer_addr *addr,
- unsigned int hash,
- bool reclaim)
+ unsigned int hash)
{
struct tcp_metrics_block *tm;
struct net *net;
+ bool reclaim = false;
spin_lock_bh(&tcp_metrics_lock);
net = dev_net(dst->dev);
+
+ /* While waiting for the spin-lock the cache might have been populated
+ * with this entry and so we have to check again.
+ */
+ tm = __tcp_get_metrics(addr, net, hash);
+ if (tm == TCP_METRICS_RECLAIM_PTR) {
+ reclaim = true;
+ tm = NULL;
+ }
+ if (tm) {
+ tcpm_check_stamp(tm, dst);
+ goto out_unlock;
+ }
+
if (unlikely(reclaim)) {
struct tcp_metrics_block *oldest;
@@ -169,17 +197,6 @@ out_unlock:
return tm;
}
-#define TCP_METRICS_TIMEOUT (60 * 60 * HZ)
-
-static void tcpm_check_stamp(struct tcp_metrics_block *tm, struct dst_entry *dst)
-{
- if (tm && unlikely(time_after(jiffies, tm->tcpm_stamp + TCP_METRICS_TIMEOUT)))
- tcpm_suck_dst(tm, dst, false);
-}
-
-#define TCP_METRICS_RECLAIM_DEPTH 5
-#define TCP_METRICS_RECLAIM_PTR (struct tcp_metrics_block *) 0x1UL
-
static struct tcp_metrics_block *tcp_get_encode(struct tcp_metrics_block *tm, int depth)
{
if (tm)
@@ -280,7 +297,6 @@ static struct tcp_metrics_block *tcp_get_metrics(struct sock *sk,
struct inetpeer_addr addr;
unsigned int hash;
struct net *net;
- bool reclaim;
addr.family = sk->sk_family;
switch (addr.family) {
@@ -300,13 +316,10 @@ static struct tcp_metrics_block *tcp_get_metrics(struct sock *sk,
hash = hash_32(hash, net->ipv4.tcp_metrics_hash_log);
tm = __tcp_get_metrics(&addr, net, hash);
- reclaim = false;
- if (tm == TCP_METRICS_RECLAIM_PTR) {
- reclaim = true;
+ if (tm == TCP_METRICS_RECLAIM_PTR)
tm = NULL;
- }
if (!tm && create)
- tm = tcpm_new(dst, &addr, hash, reclaim);
+ tm = tcpm_new(dst, &addr, hash);
else
tcpm_check_stamp(tm, dst);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ No relevant upstream commit. ]
This reverts commit 22c3ec552c29cf4bd4a75566088950fe57d860c4.
This patch is not the right fix, it introduces a memory leak when a netns is
destroyed (the FB device is never deleted).
Signed-off-by: Nicolas Dichtel <[email protected]>
Reported-by: Steven Rostedt <[email protected]>
Tested-by: Steven Rostedt <[email protected]> (and our entire MRG team)
Tested-by: "Luis Claudio R. Goncalves" <[email protected]>
Tested-by: John Kacur <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv6/ip6_tunnel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 85416a0..cf5d490 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1717,6 +1717,8 @@ static void __net_exit ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n)
}
}
+ t = rtnl_dereference(ip6n->tnls_wc[0]);
+ unregister_netdevice_queue(t->dev, &list);
unregister_netdevice_many(&list);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit 3b56496865f9f7d9bcb2f93b44c63f274f08e3b6 upstream.
This adds the workaround for erratum 793 as a precaution in case not
every BIOS implements it. This addresses CVE-2013-6885.
Erratum text:
[Revision Guide for AMD Family 16h Models 00h-0Fh Processors,
document 51810 Rev. 3.04 November 2013]
793 Specific Combination of Writes to Write Combined Memory Types and
Locked Instructions May Cause Core Hang
Description
Under a highly specific and detailed set of internal timing
conditions, a locked instruction may trigger a timing sequence whereby
the write to a write combined memory type is not flushed, causing the
locked instruction to stall indefinitely.
Potential Effect on System
Processor core hang.
Suggested Workaround
BIOS should set MSR
C001_1020[15] = 1b.
Fix Planned
No fix planned
[ hpa: updated description, fixed typo in MSR name ]
Signed-off-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Tested-by: Aravind Gopalakrishnan <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/include/uapi/asm/msr-index.h | 1 +
arch/x86/kernel/cpu/amd.c | 10 ++++++++++
2 files changed, 11 insertions(+)
diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
index bb04650..228d95f 100644
--- a/arch/x86/include/uapi/asm/msr-index.h
+++ b/arch/x86/include/uapi/asm/msr-index.h
@@ -182,6 +182,7 @@
#define MSR_AMD64_PATCH_LOADER 0xc0010020
#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140
#define MSR_AMD64_OSVW_STATUS 0xc0010141
+#define MSR_AMD64_LS_CFG 0xc0011020
#define MSR_AMD64_DC_CFG 0xc0011022
#define MSR_AMD64_BU_CFG2 0xc001102a
#define MSR_AMD64_IBSFETCHCTL 0xc0011030
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 08a0890..c2d6f50 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -508,6 +508,16 @@ static void early_init_amd(struct cpuinfo_x86 *c)
set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
}
#endif
+
+ /* F16h erratum 793, CVE-2013-6885 */
+ if (c->x86 == 0x16 && c->x86_model <= 0xf) {
+ u64 val;
+
+ rdmsrl(MSR_AMD64_LS_CFG, val);
+ if (!(val & BIT(15)))
+ wrmsrl(MSR_AMD64_LS_CFG, val | BIT(15));
+ }
+
}
static const int amd_erratum_383[];
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit 23a8e8441a0a74dd612edf81dc89d1600bc0a3d1 upstream.
Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.
The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.
For example, one just needs to do the following:
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function_graph > current_tracer
# cat trace
[..]
0) | schedule() {
------------------------------------------
0) <idle>-0 => rcu_pre-7
------------------------------------------
0) ! 2980.314 us | }
0) | schedule() {
------------------------------------------
0) rcu_pre-7 => <idle>-0
------------------------------------------
0) + 20.701 us | }
# echo 1 > /proc/sys/kernel/stack_tracer_enabled
# cat trace
[..]
1) + 20.825 us | }
1) + 21.651 us | }
1) + 30.924 us | } /* SyS_ioctl */
1) | do_page_fault() {
1) | __do_page_fault() {
1) 0.274 us | down_read_trylock();
1) 0.098 us | find_vma();
1) | handle_mm_fault() {
1) | _raw_spin_lock() {
1) 0.102 us | preempt_count_add();
1) 0.097 us | do_raw_spin_lock();
1) 2.173 us | }
1) | do_wp_page() {
1) 0.079 us | vm_normal_page();
1) 0.086 us | reuse_swap_page();
1) 0.076 us | page_move_anon_rmap();
1) | unlock_page() {
1) 0.082 us | page_waitqueue();
1) 0.086 us | __wake_up_bit();
1) 1.801 us | }
1) 0.075 us | ptep_set_access_flags();
1) | _raw_spin_unlock() {
1) 0.098 us | do_raw_spin_unlock();
1) 0.105 us | preempt_count_sub();
1) 1.884 us | }
1) 9.149 us | }
1) + 13.083 us | }
1) 0.146 us | up_read();
When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.
To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.
As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.
Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/ftrace.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 44 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index c984033..0a88de7 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -278,6 +278,12 @@ static void update_global_ops(void)
global_ops.func = func;
}
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void update_function_graph_func(void);
+#else
+static inline void update_function_graph_func(void) { }
+#endif
+
static void update_ftrace_function(void)
{
ftrace_func_t func;
@@ -306,6 +312,8 @@ static void update_ftrace_function(void)
func = ftrace_ops_list_func;
}
+ update_function_graph_func();
+
ftrace_trace_function = func;
}
@@ -4768,6 +4776,7 @@ int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace)
trace_func_graph_ret_t ftrace_graph_return =
(trace_func_graph_ret_t)ftrace_stub;
trace_func_graph_ent_t ftrace_graph_entry = ftrace_graph_entry_stub;
+static trace_func_graph_ent_t __ftrace_graph_entry = ftrace_graph_entry_stub;
/* Try to assign a return stack array on FTRACE_RETSTACK_ALLOC_SIZE tasks. */
static int alloc_retstack_tasklist(struct ftrace_ret_stack **ret_stack_list)
@@ -4909,6 +4918,30 @@ static struct ftrace_ops fgraph_ops __read_mostly = {
FTRACE_OPS_FL_RECURSION_SAFE,
};
+static int ftrace_graph_entry_test(struct ftrace_graph_ent *trace)
+{
+ if (!ftrace_ops_test(&global_ops, trace->func, NULL))
+ return 0;
+ return __ftrace_graph_entry(trace);
+}
+
+/*
+ * The function graph tracer should only trace the functions defined
+ * by set_ftrace_filter and set_ftrace_notrace. If another function
+ * tracer ops is registered, the graph tracer requires testing the
+ * function against the global ops, and not just trace any function
+ * that any ftrace_ops registered.
+ */
+static void update_function_graph_func(void)
+{
+ if (ftrace_ops_list == &ftrace_list_end ||
+ (ftrace_ops_list == &global_ops &&
+ global_ops.next == &ftrace_list_end))
+ ftrace_graph_entry = __ftrace_graph_entry;
+ else
+ ftrace_graph_entry = ftrace_graph_entry_test;
+}
+
int register_ftrace_graph(trace_func_graph_ret_t retfunc,
trace_func_graph_ent_t entryfunc)
{
@@ -4933,7 +4966,16 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc,
}
ftrace_graph_return = retfunc;
- ftrace_graph_entry = entryfunc;
+
+ /*
+ * Update the indirect function to the entryfunc, and the
+ * function that gets called to the entry_test first. Then
+ * call the update fgraph entry function to determine if
+ * the entryfunc should be called directly or not.
+ */
+ __ftrace_graph_entry = entryfunc;
+ ftrace_graph_entry = ftrace_graph_entry_test;
+ update_function_graph_func();
ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET);
@@ -4952,6 +4994,7 @@ void unregister_ftrace_graph(void)
ftrace_graph_active--;
ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
ftrace_graph_entry = ftrace_graph_entry_stub;
+ __ftrace_graph_entry = ftrace_graph_entry_stub;
ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET);
unregister_pm_notifier(&ftrace_suspend_notifier);
unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Anssi Hannula <[email protected]>
(This is a backport of *part* of upstream 611885bc963a "ALSA: hda -
hdmi: Disallow unsupported 2ch remapping on NVIDIA codecs" to stable
3.10 through 3.12. Later stable already contain all of the original
patch.)
Mainline commit 611885bc963a "ALSA: hda - hdmi: Disallow unsupported 2ch
remapping on NVIDIA codecs" introduces function patch_nvhdmi(). That
function is edited by 75fae117a5db "ALSA: hda/hdmi - allow PIN_OUT to be
dynamically enabled". In order to backport the PIN_OUT patch, I am first
back-porting just the addition of function patch_nvhdmi(), so that the
conflicts applying the PIN_OUT patch are simplified.
Ideally, one might backport all of 611885bc963a. However, that commit
doesn't apply to stable kernels, since it relies on a chain of other
patches which implement new features.
Signed-off-by: Anssi Hannula <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
[swarren, extracted just a small part of the original patch]
Signed-off-by: Stephen Warren <[email protected]>
Cc: Stephen Warren <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 60 ++++++++++++++++++++++++++++------------------
1 file changed, 37 insertions(+), 23 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 0b36c63..7f4c726 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2562,6 +2562,20 @@ static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
return 0;
}
+static int patch_nvhdmi(struct hda_codec *codec)
+{
+ struct hdmi_spec *spec;
+ int err;
+
+ err = patch_generic_hdmi(codec);
+ if (err)
+ return err;
+
+ spec = codec->spec;
+
+ return 0;
+}
+
/*
* ATI-specific implementations
*
@@ -2634,30 +2648,30 @@ static const struct hda_codec_preset snd_hda_preset_hdmi[] = {
{ .id = 0x10de0005, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
{ .id = 0x10de0006, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x },
{ .id = 0x10de0007, .name = "MCP79/7A HDMI", .patch = patch_nvhdmi_8ch_7x },
-{ .id = 0x10de000a, .name = "GPU 0a HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de000b, .name = "GPU 0b HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de000c, .name = "MCP89 HDMI", .patch = patch_generic_hdmi },
-{ .id = 0x10de000d, .name = "GPU 0d HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0010, .name = "GPU 10 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0011, .name = "GPU 11 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_generic_hdmi },
+{ .id = 0x10de000a, .name = "GPU 0a HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de000b, .name = "GPU 0b HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de000c, .name = "MCP89 HDMI", .patch = patch_nvhdmi },
+{ .id = 0x10de000d, .name = "GPU 0d HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0010, .name = "GPU 10 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0011, .name = "GPU 11 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_nvhdmi },
/* 17 is known to be absent */
-{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de001b, .name = "GPU 1b HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de001c, .name = "GPU 1c HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0040, .name = "GPU 40 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0041, .name = "GPU 41 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0042, .name = "GPU 42 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0043, .name = "GPU 43 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0044, .name = "GPU 44 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0051, .name = "GPU 51 HDMI/DP", .patch = patch_generic_hdmi },
-{ .id = 0x10de0060, .name = "GPU 60 HDMI/DP", .patch = patch_generic_hdmi },
+{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de001b, .name = "GPU 1b HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de001c, .name = "GPU 1c HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0040, .name = "GPU 40 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0041, .name = "GPU 41 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0042, .name = "GPU 42 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0043, .name = "GPU 43 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0044, .name = "GPU 44 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0051, .name = "GPU 51 HDMI/DP", .patch = patch_nvhdmi },
+{ .id = 0x10de0060, .name = "GPU 60 HDMI/DP", .patch = patch_nvhdmi },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch },
{ .id = 0x11069f80, .name = "VX900 HDMI/DP", .patch = patch_via_hdmi },
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Warren <[email protected]>
commit 75fae117a5dbde5ab984fa5c60705758cfbc6433 upstream.
Commit 384a48d71520 "ALSA: hda: HDMI: Support codecs with fewer cvts
than pins" dynamically enabled each pin widget's PIN_OUT only when the
pin was actively in use. This was required on certain NVIDIA CODECs for
correct operation. Specifically, if multiple pin widgets each had their
mux input select the same audio converter widget and each pin widget had
PIN_OUT enabled, then only one of the pin widgets would actually receive
the audio, and often not the one the user wanted!
However, this apparently broke some Intel systems, and commit
6169b673618b "ALSA: hda - Always turn on pins for HDMI/DP" reverted the
dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA
CODECs.
This change supports either dynamic or static handling of PIN_OUT,
selected by a flag set up during CODEC initialization. This flag is
enabled for all recent NVIDIA GPUs.
Reported-by: Uosis <[email protected]>
Signed-off-by: Stephen Warren <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Cc: Stephen Warren <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 40 ++++++++++++++++++++++++++++++++++++----
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 7f4c726..6fbcba5 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -86,6 +86,9 @@ struct hdmi_spec {
unsigned int channels_max; /* max over all cvts */
struct hdmi_eld temp_eld;
+
+ bool dyn_pin_out;
+
/*
* Non-generic ATI/NVIDIA specific
*/
@@ -450,15 +453,25 @@ static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
static void hdmi_init_pin(struct hda_codec *codec, hda_nid_t pin_nid)
{
+ struct hdmi_spec *spec = codec->spec;
+ int pin_out;
+
/* Unmute */
if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
snd_hda_codec_write(codec, pin_nid, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
- /* Enable pin out: some machines with GM965 gets broken output when
- * the pin is disabled or changed while using with HDMI
- */
+
+ if (spec->dyn_pin_out)
+ /* Disable pin out until stream is active */
+ pin_out = 0;
+ else
+ /* Enable pin out: some machines with GM965 gets broken output
+ * when the pin is disabled or changed while using with HDMI
+ */
+ pin_out = PIN_OUT;
+
snd_hda_codec_write(codec, pin_nid, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ AC_VERB_SET_PIN_WIDGET_CONTROL, pin_out);
}
static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t cvt_nid)
@@ -1539,6 +1552,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
hda_nid_t pin_nid = per_pin->pin_nid;
bool non_pcm;
+ int pinctl;
non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
per_pin->channels = substream->runtime->channels;
@@ -1548,6 +1562,14 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
hdmi_setup_audio_infoframe(codec, per_pin, non_pcm);
+ if (spec->dyn_pin_out) {
+ pinctl = snd_hda_codec_read(codec, pin_nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_codec_write(codec, pin_nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl | PIN_OUT);
+ }
+
return hdmi_setup_stream(codec, cvt_nid, pin_nid, stream_tag, format);
}
@@ -1567,6 +1589,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
int cvt_idx, pin_idx;
struct hdmi_spec_per_cvt *per_cvt;
struct hdmi_spec_per_pin *per_pin;
+ int pinctl;
if (hinfo->nid) {
cvt_idx = cvt_nid_to_cvt_index(spec, hinfo->nid);
@@ -1583,6 +1606,14 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
return -EINVAL;
per_pin = get_pin(spec, pin_idx);
+ if (spec->dyn_pin_out) {
+ pinctl = snd_hda_codec_read(codec, per_pin->pin_nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_codec_write(codec, per_pin->pin_nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL,
+ pinctl & ~PIN_OUT);
+ }
+
snd_hda_spdif_ctls_unassign(codec, pin_idx);
per_pin->chmap_set = false;
memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
@@ -2572,6 +2603,7 @@ static int patch_nvhdmi(struct hda_codec *codec)
return err;
spec = codec->spec;
+ spec->dyn_pin_out = true;
return 0;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <[email protected]>
commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream.
The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)
which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:
xen_platform_pci=0
(in the guest config file)
or
xen_emul_unplug=never
(on the Linux command line)
except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:
input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [#1] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300
Call Trace:
[<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240
[<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70
[<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
[<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
[<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130
[<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50
[<ffffffff8145e9a9>] driver_probe_device+0x89/0x230
[<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0
[<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
[<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
[<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0
[<ffffffff8145e7d9>] driver_attach+0x19/0x20
[<ffffffff8145e260>] bus_add_driver+0x1a0/0x220
[<ffffffff8145f1ff>] driver_register+0x5f/0xf0
[<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20
[<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40
[<ffffffffa0015000>] ? 0xffffffffa0014fff
[<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
[<ffffffff81002049>] do_one_initcall+0x49/0x170
.. snip..
which is hardly nice. This patch fixes this by having each
PV driver check for:
- if running in PV, then it is fine to execute (as that is their
native environment).
- if running in HVM, check if user wanted 'xen_emul_unplug=never',
in which case bail out and don't load any PV drivers.
- if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
does not exist, then bail out and not load PV drivers.
- (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
then bail out for all PV devices _except_ the block one.
Ditto for the network one ('nics').
- (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
then load block PV driver, and also setup the legacy IDE paths.
In (v3) make it actually load PV drivers.
Reported-by: Sander Eikelenboom <[email protected]
Reported-by: Anthony PERARD <[email protected]>
Reported-and-Tested-by: Fabio Fantoni <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: Stefano Stabellini <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]> [for PCI parts]
[ luis: backported to 3.11:
- dropped changes to drivers/char/tpm/xen-tpmfront.c ]
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/xen/platform-pci-unplug.c | 74 ++++++++++++++++++++++++++++++
drivers/block/xen-blkfront.c | 4 +-
drivers/input/misc/xen-kbdfront.c | 4 ++
drivers/net/xen-netfront.c | 2 +-
drivers/pci/xen-pcifront.c | 4 ++
drivers/video/xen-fbfront.c | 4 ++
drivers/xen/xenbus/xenbus_probe_frontend.c | 2 +-
include/xen/platform_pci.h | 23 ++++++++++
8 files changed, 113 insertions(+), 4 deletions(-)
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
index 0a78524..ab84ac1 100644
--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -69,6 +69,80 @@ static int check_platform_magic(void)
return 0;
}
+bool xen_has_pv_devices()
+{
+ if (!xen_domain())
+ return false;
+
+ /* PV domains always have them. */
+ if (xen_pv_domain())
+ return true;
+
+ /* And user has xen_platform_pci=0 set in guest config as
+ * driver did not modify the value. */
+ if (xen_platform_pci_unplug == 0)
+ return false;
+
+ if (xen_platform_pci_unplug & XEN_UNPLUG_NEVER)
+ return false;
+
+ if (xen_platform_pci_unplug & XEN_UNPLUG_ALL)
+ return true;
+
+ /* This is an odd one - we are going to run legacy
+ * and PV drivers at the same time. */
+ if (xen_platform_pci_unplug & XEN_UNPLUG_UNNECESSARY)
+ return true;
+
+ /* And the caller has to follow with xen_pv_{disk,nic}_devices
+ * to be certain which driver can load. */
+ return false;
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_devices);
+
+static bool __xen_has_pv_device(int state)
+{
+ /* HVM domains might or might not */
+ if (xen_hvm_domain() && (xen_platform_pci_unplug & state))
+ return true;
+
+ return xen_has_pv_devices();
+}
+
+bool xen_has_pv_nic_devices(void)
+{
+ return __xen_has_pv_device(XEN_UNPLUG_ALL_NICS | XEN_UNPLUG_ALL);
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_nic_devices);
+
+bool xen_has_pv_disk_devices(void)
+{
+ return __xen_has_pv_device(XEN_UNPLUG_ALL_IDE_DISKS |
+ XEN_UNPLUG_AUX_IDE_DISKS | XEN_UNPLUG_ALL);
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_disk_devices);
+
+/*
+ * This one is odd - it determines whether you want to run PV _and_
+ * legacy (IDE) drivers together. This combination is only possible
+ * under HVM.
+ */
+bool xen_has_pv_and_legacy_disk_devices(void)
+{
+ if (!xen_domain())
+ return false;
+
+ /* N.B. This is only ever used in HVM mode */
+ if (xen_pv_domain())
+ return false;
+
+ if (xen_platform_pci_unplug & XEN_UNPLUG_UNNECESSARY)
+ return true;
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_and_legacy_disk_devices);
+
void xen_unplug_emulated_devices(void)
{
int r;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index a4660bb..ed88b3c 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1278,7 +1278,7 @@ static int blkfront_probe(struct xenbus_device *dev,
char *type;
int len;
/* no unplug has been done: do not hook devices != xen vbds */
- if (xen_platform_pci_unplug & XEN_UNPLUG_UNNECESSARY) {
+ if (xen_has_pv_and_legacy_disk_devices()) {
int major;
if (!VDEV_IS_EXTENDED(vdevice))
@@ -2022,7 +2022,7 @@ static int __init xlblk_init(void)
if (!xen_domain())
return -ENODEV;
- if (xen_hvm_domain() && !xen_platform_pci_unplug)
+ if (!xen_has_pv_disk_devices())
return -ENODEV;
if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) {
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index e21c181..fbfdc10 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -29,6 +29,7 @@
#include <xen/interface/io/fbif.h>
#include <xen/interface/io/kbdif.h>
#include <xen/xenbus.h>
+#include <xen/platform_pci.h>
struct xenkbd_info {
struct input_dev *kbd;
@@ -380,6 +381,9 @@ static int __init xenkbd_init(void)
if (xen_initial_domain())
return -ENODEV;
+ if (!xen_has_pv_devices())
+ return -ENODEV;
+
return xenbus_register_frontend(&xenkbd_driver);
}
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 3f0f200..7c541dc 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -2070,7 +2070,7 @@ static int __init netif_init(void)
if (!xen_domain())
return -ENODEV;
- if (xen_hvm_domain() && !xen_platform_pci_unplug)
+ if (!xen_has_pv_nic_devices())
return -ENODEV;
pr_info("Initialising Xen virtual ethernet driver\n");
diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index f7197a7..eae7cd9 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -20,6 +20,7 @@
#include <linux/workqueue.h>
#include <linux/bitops.h>
#include <linux/time.h>
+#include <xen/platform_pci.h>
#include <asm/xen/swiotlb-xen.h>
#define INVALID_GRANT_REF (0)
@@ -1138,6 +1139,9 @@ static int __init pcifront_init(void)
if (!xen_pv_domain() || xen_initial_domain())
return -ENODEV;
+ if (!xen_has_pv_devices())
+ return -ENODEV;
+
pci_frontend_registrar(1 /* enable */);
return xenbus_register_frontend(&xenpci_driver);
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index cd005c2..4b2d3ab 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -35,6 +35,7 @@
#include <xen/interface/io/fbif.h>
#include <xen/interface/io/protocols.h>
#include <xen/xenbus.h>
+#include <xen/platform_pci.h>
struct xenfb_info {
unsigned char *fb;
@@ -699,6 +700,9 @@ static int __init xenfb_init(void)
if (xen_initial_domain())
return -ENODEV;
+ if (!xen_has_pv_devices())
+ return -ENODEV;
+
return xenbus_register_frontend(&xenfb_driver);
}
diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c
index 34b20bf..6244f9c 100644
--- a/drivers/xen/xenbus/xenbus_probe_frontend.c
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@@ -496,7 +496,7 @@ subsys_initcall(xenbus_probe_frontend_init);
#ifndef MODULE
static int __init boot_wait_for_devices(void)
{
- if (xen_hvm_domain() && !xen_platform_pci_unplug)
+ if (!xen_has_pv_devices())
return -ENODEV;
ready_to_wait_for_devices = 1;
diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h
index 438c256..b49eeab 100644
--- a/include/xen/platform_pci.h
+++ b/include/xen/platform_pci.h
@@ -48,4 +48,27 @@ static inline int xen_must_unplug_disks(void) {
extern int xen_platform_pci_unplug;
+#if defined(CONFIG_XEN_PVHVM)
+extern bool xen_has_pv_devices(void);
+extern bool xen_has_pv_disk_devices(void);
+extern bool xen_has_pv_nic_devices(void);
+extern bool xen_has_pv_and_legacy_disk_devices(void);
+#else
+static inline bool xen_has_pv_devices(void)
+{
+ return IS_ENABLED(CONFIG_XEN);
+}
+static inline bool xen_has_pv_disk_devices(void)
+{
+ return IS_ENABLED(CONFIG_XEN);
+}
+static inline bool xen_has_pv_nic_devices(void)
+{
+ return IS_ENABLED(CONFIG_XEN);
+}
+static inline bool xen_has_pv_and_legacy_disk_devices(void)
+{
+ return false;
+}
+#endif
#endif /* _XEN_PLATFORM_PCI_H */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Pugliese <[email protected]>
commit 83e83ecb79a8225e79bc8e54e9aff3e0e27658a2 upstream.
There is no need to skip querying the config and string descriptors for
unauthorized WUSB devices when usb_new_device is called. It is allowed
by WUSB spec. The only action that needs to be delayed until
authorization time is the set config. This change allows user mode
tools to see the config and string descriptors earlier in enumeration
which is needed for some WUSB devices to function properly on Android
systems. It also reduces the amount of divergent code paths needed
for WUSB devices.
Signed-off-by: Thomas Pugliese <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/core/config.c | 7 -------
drivers/usb/core/hub.c | 40 +++++++---------------------------------
2 files changed, 7 insertions(+), 40 deletions(-)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index a6b2cab..548d199 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -651,10 +651,6 @@ void usb_destroy_configuration(struct usb_device *dev)
*
* hub-only!! ... and only in reset path, or usb_new_device()
* (used by real hubs and virtual root hubs)
- *
- * NOTE: if this is a WUSB device and is not authorized, we skip the
- * whole thing. A non-authorized USB device has no
- * configurations.
*/
int usb_get_configuration(struct usb_device *dev)
{
@@ -666,8 +662,6 @@ int usb_get_configuration(struct usb_device *dev)
struct usb_config_descriptor *desc;
cfgno = 0;
- if (dev->authorized == 0) /* Not really an error */
- goto out_not_authorized;
result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
@@ -751,7 +745,6 @@ int usb_get_configuration(struct usb_device *dev)
err:
kfree(desc);
-out_not_authorized:
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8b8eec8..0e72571 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2233,18 +2233,13 @@ static int usb_enumerate_device(struct usb_device *udev)
return err;
}
}
- if (udev->wusb == 1 && udev->authorized == 0) {
- udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- }
- else {
- /* read the standard strings and cache them if present */
- udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
- udev->manufacturer = usb_cache_string(udev,
- udev->descriptor.iManufacturer);
- udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
- }
+
+ /* read the standard strings and cache them if present */
+ udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+ udev->manufacturer = usb_cache_string(udev,
+ udev->descriptor.iManufacturer);
+ udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
err = usb_enumerate_device_otg(udev);
if (err < 0)
return err;
@@ -2423,16 +2418,6 @@ int usb_deauthorize_device(struct usb_device *usb_dev)
usb_dev->authorized = 0;
usb_set_configuration(usb_dev, -1);
- kfree(usb_dev->product);
- usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- kfree(usb_dev->manufacturer);
- usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- kfree(usb_dev->serial);
- usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-
- usb_destroy_configuration(usb_dev);
- usb_dev->descriptor.bNumConfigurations = 0;
-
out_unauthorized:
usb_unlock_device(usb_dev);
return 0;
@@ -2460,17 +2445,7 @@ int usb_authorize_device(struct usb_device *usb_dev)
goto error_device_descriptor;
}
- kfree(usb_dev->product);
- usb_dev->product = NULL;
- kfree(usb_dev->manufacturer);
- usb_dev->manufacturer = NULL;
- kfree(usb_dev->serial);
- usb_dev->serial = NULL;
-
usb_dev->authorized = 1;
- result = usb_enumerate_device(usb_dev);
- if (result < 0)
- goto error_enumerate;
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
@@ -2486,7 +2461,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
}
dev_info(&usb_dev->dev, "authorized to connect\n");
-error_enumerate:
error_device_descriptor:
usb_autosuspend_device(usb_dev);
error_autoresume:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Hartkopp <[email protected]>
commit a0065f266a9b5d51575535a25c15ccbeed9a9966 upstream.
The two commits 0115e8e30d (net: remove delay at device dismantle) and
748e2d9396a (net: reinstate rtnl in call_netdevice_notifiers()) silently
removed a NULL pointer check for in_dev since Linux 3.7.
This patch re-introduces this check as it causes crashing the kernel when
setting small mtu values on non-ip capable netdevices.
Signed-off-by: Oliver Hartkopp <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv4/fib_frontend.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index b3f627a..f7f8cff 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -1049,6 +1049,8 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo
}
in_dev = __in_dev_get_rtnl(dev);
+ if (!in_dev)
+ return NOTIFY_DONE;
switch (event) {
case NETDEV_UP:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Roszko <[email protected]>
commit 0cc7c6c7916b1b6f34350ff1473b80b9f7e459c0 upstream.
Interrupts were being cleaned up late in the shutdown handler, it is possible
that an interrupt can occur and schedule a tasklet that runs after the port is
cleaned up. There is a null dereference due to this race condition with the
following stacktrace:
[<c02092b0>] (atmel_tasklet_func+0x514/0x814) from [<c001fd34>] (tasklet_action+0x70/0xa8)
[<c001fd34>] (tasklet_action+0x70/0xa8) from [<c001f60c>] (__do_softirq+0x90/0x144)
[<c001f60c>] (__do_softirq+0x90/0x144) from [<c001fa18>] (irq_exit+0x40/0x4c)
[<c001fa18>] (irq_exit+0x40/0x4c) from [<c000e298>] (handle_IRQ+0x64/0x84)
[<c000e298>] (handle_IRQ+0x64/0x84) from [<c000d6c0>] (__irq_svc+0x40/0x50)
[<c000d6c0>] (__irq_svc+0x40/0x50) from [<c0208060>] (atmel_rx_dma_release+0x88/0xb8)
[<c0208060>] (atmel_rx_dma_release+0x88/0xb8) from [<c0209740>] (atmel_shutdown+0x104/0x160)
[<c0209740>] (atmel_shutdown+0x104/0x160) from [<c0205e8c>] (uart_port_shutdown+0x2c/0x38)
Signed-off-by: Marek Roszko <[email protected]>
Acked-by: Leilei Zhao <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/tty/serial/atmel_serial.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 691265f..b70276d 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1022,12 +1022,24 @@ static int atmel_startup(struct uart_port *port)
static void atmel_shutdown(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
/*
- * Ensure everything is stopped.
+ * Clear out any scheduled tasklets before
+ * we destroy the buffers
+ */
+ tasklet_kill(&atmel_port->tasklet);
+
+ /*
+ * Ensure everything is stopped and
+ * disable all interrupts, port and break condition.
*/
atmel_stop_rx(port);
atmel_stop_tx(port);
+ UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ UART_PUT_IDR(port, -1);
+
+
/*
* Shut-down the DMA.
*/
@@ -1054,12 +1066,6 @@ static void atmel_shutdown(struct uart_port *port)
}
/*
- * Disable all interrupts, port and break condition.
- */
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
- UART_PUT_IDR(port, -1);
-
- /*
* Free the interrupt
*/
free_irq(port->irq, port);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Duan Jiong <[email protected]>
commit 11c21a307d79ea5f6b6fc0d3dfdeda271e5e65f6 upstream.
commit a622260254ee48("ip_tunnel: fix kernel panic with icmp_dest_unreach")
clear IPCB in ip_tunnel_xmit() , or else skb->cb[] may contain garbage from
GSO segmentation layer.
But commit 0e6fbc5b6c621("ip_tunnels: extend iptunnel_xmit()") refactor codes,
and it clear IPCB behind the dst_link_failure().
So clear IPCB in ip_tunnel_xmit() just like commti a622260254ee48("ip_tunnel:
fix kernel panic with icmp_dest_unreach").
Signed-off-by: Duan Jiong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv4/ip_tunnel.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index ffc2108..b6829f4 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -621,6 +621,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
tunnel->err_time + IPTUNNEL_ERR_TIMEO)) {
tunnel->err_count--;
+ memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
dst_link_failure(skb);
} else
tunnel->err_count = 0;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ No relevant upstream commit. ]
This problem was fixed upstream by commit 1e9f3d6f1c40 ("ip6tnl: fix use after
free of fb_tnl_dev").
The upstream patch depends on upstream commit 0bd8762824e7 ("ip6tnl: add x-netns
support"), which was not backported into 3.10 branch.
First, explain the problem: when the ip6_tunnel module is unloaded,
ip6_tunnel_cleanup() is called.
rmmod ip6_tunnel
=> ip6_tunnel_cleanup()
=> rtnl_link_unregister()
=> __rtnl_kill_links()
=> for_each_netdev(net, dev) {
if (dev->rtnl_link_ops == ops)
ops->dellink(dev, &list_kill);
}
At this point, the FB device is deleted (and all ip6tnl tunnels).
=> unregister_pernet_device()
=> unregister_pernet_operations()
=> ops_exit_list()
=> ip6_tnl_exit_net()
=> ip6_tnl_destroy_tunnels()
=> t = rtnl_dereference(ip6n->tnls_wc[0]);
unregister_netdevice_queue(t->dev, &list);
We delete the FB device a second time here!
The previous fix removes these lines, which fix this double free. But the patch
introduces a memory leak when a netns is destroyed, because the FB device is
never deleted. By adding an rtnl ops which delete all ip6tnl device excepting
the FB device, we can keep this exlicit removal in ip6_tnl_destroy_tunnels().
CC: Steven Rostedt <[email protected]>
CC: Willem de Bruijn <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Reported-by: Steven Rostedt <[email protected]>
Tested-by: Steven Rostedt <[email protected]> (and our entire MRG team)
Tested-by: "Luis Claudio R. Goncalves" <[email protected]>
Tested-by: John Kacur <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv6/ip6_tunnel.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index cf5d490..7839b9d 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1623,6 +1623,15 @@ static int ip6_tnl_changelink(struct net_device *dev, struct nlattr *tb[],
return ip6_tnl_update(t, &p);
}
+static void ip6_tnl_dellink(struct net_device *dev, struct list_head *head)
+{
+ struct net *net = dev_net(dev);
+ struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+
+ if (dev != ip6n->fb_tnl_dev)
+ unregister_netdevice_queue(dev, head);
+}
+
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
return
@@ -1687,6 +1696,7 @@ static struct rtnl_link_ops ip6_link_ops __read_mostly = {
.validate = ip6_tnl_validate,
.newlink = ip6_tnl_newlink,
.changelink = ip6_tnl_changelink,
+ .dellink = ip6_tnl_dellink,
.get_size = ip6_tnl_get_size,
.fill_info = ip6_tnl_fill_info,
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit aee636c4809fa54848ff07a899b326eb1f9987a2 upstream.
At first Jakub Zawadzki noticed that some divisions by reciprocal_divide
were not correct. (off by one in some cases)
http://www.wireshark.org/~darkjames/reciprocal-buggy.c
He could also show this with BPF:
http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c
The reciprocal divide in linux kernel is not generic enough,
lets remove its use in BPF, as it is not worth the pain with
current cpus.
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Jakub Zawadzki <[email protected]>
Cc: Mircea Gherzan <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Hannes Frederic Sowa <[email protected]>
Cc: Matt Evans <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/net/bpf_jit_32.c | 6 +++---
arch/powerpc/net/bpf_jit_comp.c | 7 ++++---
arch/s390/net/bpf_jit_comp.c | 17 ++++++++++++-----
arch/sparc/net/bpf_jit_comp.c | 17 ++++++++++++++---
arch/x86/net/bpf_jit_comp.c | 14 ++++++++++----
net/core/filter.c | 30 ++----------------------------
6 files changed, 45 insertions(+), 46 deletions(-)
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index f50d223..3cef474 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -637,10 +637,10 @@ load_ind:
emit(ARM_MUL(r_A, r_A, r_X), ctx);
break;
case BPF_S_ALU_DIV_K:
- /* current k == reciprocal_value(userspace k) */
+ if (k == 1)
+ break;
emit_mov_i(r_scratch, k, ctx);
- /* A = top 32 bits of the product */
- emit(ARM_UMULL(r_scratch, r_A, r_A, r_scratch), ctx);
+ emit_udiv(r_A, r_A, r_scratch, ctx);
break;
case BPF_S_ALU_DIV_X:
update_on_xread(ctx);
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index bf56e33..0f70e9d 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -209,10 +209,11 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
}
PPC_DIVWU(r_A, r_A, r_X);
break;
- case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
+ case BPF_S_ALU_DIV_K: /* A /= K */
+ if (K == 1)
+ break;
PPC_LI32(r_scratch1, K);
- /* Top 32 bits of 64bit result -> A */
- PPC_MULHWU(r_A, r_A, r_scratch1);
+ PPC_DIVWU(r_A, r_A, r_scratch1);
break;
case BPF_S_ALU_AND_X:
ctx->seen |= SEEN_XREG;
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 7092392..e1ca241 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -371,11 +371,13 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
/* dr %r4,%r12 */
EMIT2(0x1d4c);
break;
- case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K) */
- /* m %r4,<d(K)>(%r13) */
- EMIT4_DISP(0x5c40d000, EMIT_CONST(K));
- /* lr %r5,%r4 */
- EMIT2(0x1854);
+ case BPF_S_ALU_DIV_K: /* A /= K */
+ if (K == 1)
+ break;
+ /* lhi %r4,0 */
+ EMIT4(0xa7480000);
+ /* d %r4,<d(K)>(%r13) */
+ EMIT4_DISP(0x5d40d000, EMIT_CONST(K));
break;
case BPF_S_ALU_MOD_X: /* A %= X */
jit->seen |= SEEN_XREG | SEEN_RET0;
@@ -391,6 +393,11 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
EMIT2(0x1854);
break;
case BPF_S_ALU_MOD_K: /* A %= K */
+ if (K == 1) {
+ /* lhi %r5,0 */
+ EMIT4(0xa7580000);
+ break;
+ }
/* lhi %r4,0 */
EMIT4(0xa7480000);
/* d %r4,<d(K)>(%r13) */
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
index 9c7be59..dface38 100644
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -497,9 +497,20 @@ void bpf_jit_compile(struct sk_filter *fp)
case BPF_S_ALU_MUL_K: /* A *= K */
emit_alu_K(MUL, K);
break;
- case BPF_S_ALU_DIV_K: /* A /= K */
- emit_alu_K(MUL, K);
- emit_read_y(r_A);
+ case BPF_S_ALU_DIV_K: /* A /= K with K != 0*/
+ if (K == 1)
+ break;
+ emit_write_y(G0);
+#ifdef CONFIG_SPARC32
+ /* The Sparc v8 architecture requires
+ * three instructions between a %y
+ * register write and the first use.
+ */
+ emit_nop();
+ emit_nop();
+ emit_nop();
+#endif
+ emit_alu_K(DIV, K);
break;
case BPF_S_ALU_DIV_X: /* A /= X; */
emit_cmpi(r_X, 0);
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 79c216a..b6458ed 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -359,15 +359,21 @@ void bpf_jit_compile(struct sk_filter *fp)
EMIT2(0x89, 0xd0); /* mov %edx,%eax */
break;
case BPF_S_ALU_MOD_K: /* A %= K; */
+ if (K == 1) {
+ CLEAR_A();
+ break;
+ }
EMIT2(0x31, 0xd2); /* xor %edx,%edx */
EMIT1(0xb9);EMIT(K, 4); /* mov imm32,%ecx */
EMIT2(0xf7, 0xf1); /* div %ecx */
EMIT2(0x89, 0xd0); /* mov %edx,%eax */
break;
- case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */
- EMIT3(0x48, 0x69, 0xc0); /* imul imm32,%rax,%rax */
- EMIT(K, 4);
- EMIT4(0x48, 0xc1, 0xe8, 0x20); /* shr $0x20,%rax */
+ case BPF_S_ALU_DIV_K: /* A /= K */
+ if (K == 1)
+ break;
+ EMIT2(0x31, 0xd2); /* xor %edx,%edx */
+ EMIT1(0xb9);EMIT(K, 4); /* mov imm32,%ecx */
+ EMIT2(0xf7, 0xf1); /* div %ecx */
break;
case BPF_S_ALU_AND_X:
seen |= SEEN_XREG;
diff --git a/net/core/filter.c b/net/core/filter.c
index 6438f29..52f0122 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -36,7 +36,6 @@
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <linux/filter.h>
-#include <linux/reciprocal_div.h>
#include <linux/ratelimit.h>
#include <linux/seccomp.h>
#include <linux/if_vlan.h>
@@ -166,7 +165,7 @@ unsigned int sk_run_filter(const struct sk_buff *skb,
A /= X;
continue;
case BPF_S_ALU_DIV_K:
- A = reciprocal_divide(A, K);
+ A /= K;
continue;
case BPF_S_ALU_MOD_X:
if (X == 0)
@@ -553,11 +552,6 @@ int sk_chk_filter(struct sock_filter *filter, unsigned int flen)
/* Some instructions need special checks */
switch (code) {
case BPF_S_ALU_DIV_K:
- /* check for division by zero */
- if (ftest->k == 0)
- return -EINVAL;
- ftest->k = reciprocal_value(ftest->k);
- break;
case BPF_S_ALU_MOD_K:
/* check for division by zero */
if (ftest->k == 0)
@@ -853,27 +847,7 @@ void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to)
to->code = decodes[code];
to->jt = filt->jt;
to->jf = filt->jf;
-
- if (code == BPF_S_ALU_DIV_K) {
- /*
- * When loaded this rule user gave us X, which was
- * translated into R = r(X). Now we calculate the
- * RR = r(R) and report it back. If next time this
- * value is loaded and RRR = r(RR) is calculated
- * then the R == RRR will be true.
- *
- * One exception. X == 1 translates into R == 0 and
- * we can't calculate RR out of it with r().
- */
-
- if (filt->k == 0)
- to->k = 1;
- else
- to->k = reciprocal_value(filt->k);
-
- BUG_ON(reciprocal_value(to->k) != filt->k);
- } else
- to->k = filt->k;
+ to->k = filt->k;
}
int sk_get_filter(struct sock *sk, struct sock_filter __user *ubuf, unsigned int len)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ No relevant upstream commit. ]
This problem was fixed upstream by commit 9434266f2c64 ("sit: fix use after free
of fb_tunnel_dev").
The upstream patch depends on upstream commit 5e6700b3bf98 ("sit: add support of
x-netns"), which was not backported into 3.10 branch.
First, explain the problem: when the sit module is unloaded, sit_cleanup() is
called.
rmmod sit
=> sit_cleanup()
=> rtnl_link_unregister()
=> __rtnl_kill_links()
=> for_each_netdev(net, dev) {
if (dev->rtnl_link_ops == ops)
ops->dellink(dev, &list_kill);
}
At this point, the FB device is deleted (and all sit tunnels).
=> unregister_pernet_device()
=> unregister_pernet_operations()
=> ops_exit_list()
=> sit_exit_net()
=> sit_destroy_tunnels()
In this function, no tunnel is found.
=> unregister_netdevice_queue(sitn->fb_tunnel_dev, &list);
We delete the FB device a second time here!
Because we cannot simply remove the second deletion (sit_exit_net() must remove
the FB device when a netns is deleted), we add an rtnl ops which delete all sit
device excepting the FB device and thus we can keep the explicit deletion in
sit_exit_net().
CC: Steven Rostedt <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Reported-by: Steven Rostedt <[email protected]>
Tested-by: Steven Rostedt <[email protected]> (and our entire MRG team)
Tested-by: "Luis Claudio R. Goncalves" <[email protected]>
Tested-by: John Kacur <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv6/sit.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index a51ad07..bbe1402 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1601,6 +1601,15 @@ static const struct nla_policy ipip6_policy[IFLA_IPTUN_MAX + 1] = {
#endif
};
+static void ipip6_dellink(struct net_device *dev, struct list_head *head)
+{
+ struct net *net = dev_net(dev);
+ struct sit_net *sitn = net_generic(net, sit_net_id);
+
+ if (dev != sitn->fb_tunnel_dev)
+ unregister_netdevice_queue(dev, head);
+}
+
static struct rtnl_link_ops sit_link_ops __read_mostly = {
.kind = "sit",
.maxtype = IFLA_IPTUN_MAX,
@@ -1612,6 +1621,7 @@ static struct rtnl_link_ops sit_link_ops __read_mostly = {
.changelink = ipip6_changelink,
.get_size = ipip6_get_size,
.fill_info = ipip6_fill_info,
+ .dellink = ipip6_dellink,
};
static struct xfrm_tunnel sit_handler __read_mostly = {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Annie Li <[email protected]>
commit cefe0078eea52af17411eb1248946a94afb84ca5 upstream.
This patch removes grant transfer releasing code from netfront, and uses
gnttab_end_foreign_access to end grant access since
gnttab_end_foreign_access_ref may fail when the grant entry is
currently used for reading or writing.
* clean up grant transfer code kept from old netfront(2.6.18) which grants
pages for access/map and transfer. But grant transfer is deprecated in current
netfront, so remove corresponding release code for transfer.
* fix resource leak, release grant access (through gnttab_end_foreign_access)
and skb for tx/rx path, use get_page to ensure page is released when grant
access is completed successfully.
Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches
for them will be created separately.
V6: Correct subject line and commit message.
V5: Remove unecessary change in xennet_end_access.
V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in
single patch.
V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill
grant acess is ended.
V2: Improve patch comments.
Signed-off-by: Annie Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/xen-netfront.c | 88 ++++++++++++++--------------------------------
1 file changed, 26 insertions(+), 62 deletions(-)
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 36808bf..3f0f200 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -117,6 +117,7 @@ struct netfront_info {
} tx_skbs[NET_TX_RING_SIZE];
grant_ref_t gref_tx_head;
grant_ref_t grant_tx_ref[NET_TX_RING_SIZE];
+ struct page *grant_tx_page[NET_TX_RING_SIZE];
unsigned tx_skb_freelist;
spinlock_t rx_lock ____cacheline_aligned_in_smp;
@@ -395,6 +396,7 @@ static void xennet_tx_buf_gc(struct net_device *dev)
gnttab_release_grant_reference(
&np->gref_tx_head, np->grant_tx_ref[id]);
np->grant_tx_ref[id] = GRANT_INVALID_REF;
+ np->grant_tx_page[id] = NULL;
add_id_to_freelist(&np->tx_skb_freelist, np->tx_skbs, id);
dev_kfree_skb_irq(skb);
}
@@ -451,6 +453,7 @@ static void xennet_make_frags(struct sk_buff *skb, struct net_device *dev,
gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id,
mfn, GNTMAP_readonly);
+ np->grant_tx_page[id] = virt_to_page(data);
tx->gref = np->grant_tx_ref[id] = ref;
tx->offset = offset;
tx->size = len;
@@ -496,6 +499,7 @@ static void xennet_make_frags(struct sk_buff *skb, struct net_device *dev,
np->xbdev->otherend_id,
mfn, GNTMAP_readonly);
+ np->grant_tx_page[id] = page;
tx->gref = np->grant_tx_ref[id] = ref;
tx->offset = offset;
tx->size = bytes;
@@ -595,6 +599,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
mfn = virt_to_mfn(data);
gnttab_grant_foreign_access_ref(
ref, np->xbdev->otherend_id, mfn, GNTMAP_readonly);
+ np->grant_tx_page[id] = virt_to_page(data);
tx->gref = np->grant_tx_ref[id] = ref;
tx->offset = offset;
tx->size = len;
@@ -1119,10 +1124,11 @@ static void xennet_release_tx_bufs(struct netfront_info *np)
continue;
skb = np->tx_skbs[i].skb;
- gnttab_end_foreign_access_ref(np->grant_tx_ref[i],
- GNTMAP_readonly);
- gnttab_release_grant_reference(&np->gref_tx_head,
- np->grant_tx_ref[i]);
+ get_page(np->grant_tx_page[i]);
+ gnttab_end_foreign_access(np->grant_tx_ref[i],
+ GNTMAP_readonly,
+ (unsigned long)page_address(np->grant_tx_page[i]));
+ np->grant_tx_page[i] = NULL;
np->grant_tx_ref[i] = GRANT_INVALID_REF;
add_id_to_freelist(&np->tx_skb_freelist, np->tx_skbs, i);
dev_kfree_skb_irq(skb);
@@ -1131,78 +1137,35 @@ static void xennet_release_tx_bufs(struct netfront_info *np)
static void xennet_release_rx_bufs(struct netfront_info *np)
{
- struct mmu_update *mmu = np->rx_mmu;
- struct multicall_entry *mcl = np->rx_mcl;
- struct sk_buff_head free_list;
- struct sk_buff *skb;
- unsigned long mfn;
- int xfer = 0, noxfer = 0, unused = 0;
int id, ref;
- dev_warn(&np->netdev->dev, "%s: fix me for copying receiver.\n",
- __func__);
- return;
-
- skb_queue_head_init(&free_list);
-
spin_lock_bh(&np->rx_lock);
for (id = 0; id < NET_RX_RING_SIZE; id++) {
- ref = np->grant_rx_ref[id];
- if (ref == GRANT_INVALID_REF) {
- unused++;
- continue;
- }
+ struct sk_buff *skb;
+ struct page *page;
skb = np->rx_skbs[id];
- mfn = gnttab_end_foreign_transfer_ref(ref);
- gnttab_release_grant_reference(&np->gref_rx_head, ref);
- np->grant_rx_ref[id] = GRANT_INVALID_REF;
-
- if (0 == mfn) {
- skb_shinfo(skb)->nr_frags = 0;
- dev_kfree_skb(skb);
- noxfer++;
+ if (!skb)
continue;
- }
- if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- /* Remap the page. */
- const struct page *page =
- skb_frag_page(&skb_shinfo(skb)->frags[0]);
- unsigned long pfn = page_to_pfn(page);
- void *vaddr = page_address(page);
+ ref = np->grant_rx_ref[id];
+ if (ref == GRANT_INVALID_REF)
+ continue;
- MULTI_update_va_mapping(mcl, (unsigned long)vaddr,
- mfn_pte(mfn, PAGE_KERNEL),
- 0);
- mcl++;
- mmu->ptr = ((u64)mfn << PAGE_SHIFT)
- | MMU_MACHPHYS_UPDATE;
- mmu->val = pfn;
- mmu++;
+ page = skb_frag_page(&skb_shinfo(skb)->frags[0]);
- set_phys_to_machine(pfn, mfn);
- }
- __skb_queue_tail(&free_list, skb);
- xfer++;
- }
-
- dev_info(&np->netdev->dev, "%s: %d xfer, %d noxfer, %d unused\n",
- __func__, xfer, noxfer, unused);
+ /* gnttab_end_foreign_access() needs a page ref until
+ * foreign access is ended (which may be deferred).
+ */
+ get_page(page);
+ gnttab_end_foreign_access(ref, 0,
+ (unsigned long)page_address(page));
+ np->grant_rx_ref[id] = GRANT_INVALID_REF;
- if (xfer) {
- if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- /* Do all the remapping work and M2P updates. */
- MULTI_mmu_update(mcl, np->rx_mmu, mmu - np->rx_mmu,
- NULL, DOMID_SELF);
- mcl++;
- HYPERVISOR_multicall(np->rx_mcl, mcl - np->rx_mcl);
- }
+ kfree_skb(skb);
}
- __skb_queue_purge(&free_list);
-
spin_unlock_bh(&np->rx_lock);
}
@@ -1349,6 +1312,7 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
for (i = 0; i < NET_RX_RING_SIZE; i++) {
np->rx_skbs[i] = NULL;
np->grant_rx_ref[i] = GRANT_INVALID_REF;
+ np->grant_tx_page[i] = NULL;
}
/* A grant for every tx ring slot */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Frederic Sowa <[email protected]>
commit 95f4a45de1a0f172b35451fc52283290adb21f6e upstream.
Bob Falken reported that after 4G packets, multicast forwarding stopped
working. This was because of a rule reference counter overflow which
freed the rule as soon as the overflow happend.
This patch solves this by adding the FIB_LOOKUP_NOREF flag to
fib_rules_lookup calls. This is safe even from non-rcu locked sections
as in this case the flag only implies not taking a reference to the rule,
which we don't need at all.
Rules only hold references to the namespace, which are guaranteed to be
available during the call of the non-rcu protected function reg_vif_xmit
because of the interface reference which itself holds a reference to
the net namespace.
Fixes: f0ad0860d01e47 ("ipv4: ipmr: support multiple tables")
Fixes: d1db275dd3f6e4 ("ipv6: ip6mr: support multiple tables")
Reported-by: Bob Falken <[email protected]>
Cc: Patrick McHardy <[email protected]>
Cc: Thomas Graf <[email protected]>
Cc: Julian Anastasov <[email protected]>
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv4/ipmr.c | 7 +++++--
net/ipv6/ip6mr.c | 7 +++++--
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 20cb33a..6fabc8d 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -157,9 +157,12 @@ static struct mr_table *ipmr_get_table(struct net *net, u32 id)
static int ipmr_fib_lookup(struct net *net, struct flowi4 *flp4,
struct mr_table **mrt)
{
- struct ipmr_result res;
- struct fib_lookup_arg arg = { .result = &res, };
int err;
+ struct ipmr_result res;
+ struct fib_lookup_arg arg = {
+ .result = &res,
+ .flags = FIB_LOOKUP_NOREF,
+ };
err = fib_rules_lookup(net->ipv4.mr_rules_ops,
flowi4_to_flowi(flp4), 0, &arg);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 03986d3..0caf013 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -141,9 +141,12 @@ static struct mr6_table *ip6mr_get_table(struct net *net, u32 id)
static int ip6mr_fib_lookup(struct net *net, struct flowi6 *flp6,
struct mr6_table **mrt)
{
- struct ip6mr_result res;
- struct fib_lookup_arg arg = { .result = &res, };
int err;
+ struct ip6mr_result res;
+ struct fib_lookup_arg arg = {
+ .result = &res,
+ .flags = FIB_LOOKUP_NOREF,
+ };
err = fib_rules_lookup(net->ipv6.mr6_rules_ops,
flowi6_to_flowi(flp6), 0, &arg);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Holger Eitzenberger <[email protected]>
commit a452ce345d63ddf92cd101e4196569f8718ad319 upstream.
I see a memory leak when using a transparent HTTP proxy using TPROXY
together with TCP early demux and Kernel v3.8.13.15 (Ubuntu stable):
unreferenced object 0xffff88008cba4a40 (size 1696):
comm "softirq", pid 0, jiffies 4294944115 (age 8907.520s)
hex dump (first 32 bytes):
0a e0 20 6a 40 04 1b 37 92 be 32 e2 e8 b4 00 00 .. [email protected].....
02 00 07 01 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff810b710a>] kmem_cache_alloc+0xad/0xb9
[<ffffffff81270185>] sk_prot_alloc+0x29/0xc5
[<ffffffff812702cf>] sk_clone_lock+0x14/0x283
[<ffffffff812aaf3a>] inet_csk_clone_lock+0xf/0x7b
[<ffffffff8129a893>] netlink_broadcast+0x14/0x16
[<ffffffff812c1573>] tcp_create_openreq_child+0x1b/0x4c3
[<ffffffff812c033e>] tcp_v4_syn_recv_sock+0x38/0x25d
[<ffffffff812c13e4>] tcp_check_req+0x25c/0x3d0
[<ffffffff812bf87a>] tcp_v4_do_rcv+0x287/0x40e
[<ffffffff812a08a7>] ip_route_input_noref+0x843/0xa55
[<ffffffff812bfeca>] tcp_v4_rcv+0x4c9/0x725
[<ffffffff812a26f4>] ip_local_deliver_finish+0xe9/0x154
[<ffffffff8127a927>] __netif_receive_skb+0x4b2/0x514
[<ffffffff8127aa77>] process_backlog+0xee/0x1c5
[<ffffffff8127c949>] net_rx_action+0xa7/0x200
[<ffffffff81209d86>] add_interrupt_randomness+0x39/0x157
But there are many more, resulting in the machine going OOM after some
days.
>From looking at the TPROXY code, and with help from Florian, I see
that the memory leak is introduced in tcp_v4_early_demux():
void tcp_v4_early_demux(struct sk_buff *skb)
{
/* ... */
iph = ip_hdr(skb);
th = tcp_hdr(skb);
if (th->doff < sizeof(struct tcphdr) / 4)
return;
sk = __inet_lookup_established(dev_net(skb->dev), &tcp_hashinfo,
iph->saddr, th->source,
iph->daddr, ntohs(th->dest),
skb->skb_iif);
if (sk) {
skb->sk = sk;
where the socket is assigned unconditionally to skb->sk, also bumping
the refcnt on it. This is problematic, because in our case the skb
has already a socket assigned in the TPROXY target. This then results
in the leak I see.
The very same issue seems to be with IPv6, but haven't tested.
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Holger Eitzenberger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv4/ip_input.c | 2 +-
net/ipv6/ip6_input.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 15e3e68..0a22bb0 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -313,7 +313,7 @@ static int ip_rcv_finish(struct sk_buff *skb)
const struct iphdr *iph = ip_hdr(skb);
struct rtable *rt;
- if (sysctl_ip_early_demux && !skb_dst(skb)) {
+ if (sysctl_ip_early_demux && !skb_dst(skb) && skb->sk == NULL) {
const struct net_protocol *ipprot;
int protocol = iph->protocol;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 2bab2aa..774b09c 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -49,7 +49,7 @@
int ip6_rcv_finish(struct sk_buff *skb)
{
- if (sysctl_ip_early_demux && !skb_dst(skb)) {
+ if (sysctl_ip_early_demux && !skb_dst(skb) && skb->sk == NULL) {
const struct inet6_protocol *ipprot;
ipprot = rcu_dereference(inet6_protos[ipv6_hdr(skb)->nexthdr]);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit 3af57f78c38131b7a66e2b01e06fdacae01992a3 upstream.
The s390 bpf jit compiler emits the signed divide instructions "dr" and "d"
for unsigned divisions.
This can cause problems: the dividend will be zero extended to a 64 bit value
and the divisor is the 32 bit signed value as specified A or X accumulator,
even though A and X are supposed to be treated as unsigned values.
The divide instrunctions will generate an exception if the result cannot be
expressed with a 32 bit signed value.
This is the case if e.g. the dividend is 0xffffffff and the divisor either 1
or also 0xffffffff (signed: -1).
To avoid all these issues simply use unsigned divide instructions.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/net/bpf_jit_comp.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index e1ca241..3d613b8 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -368,16 +368,16 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
EMIT4_PCREL(0xa7840000, (jit->ret0_ip - jit->prg));
/* lhi %r4,0 */
EMIT4(0xa7480000);
- /* dr %r4,%r12 */
- EMIT2(0x1d4c);
+ /* dlr %r4,%r12 */
+ EMIT4(0xb997004c);
break;
case BPF_S_ALU_DIV_K: /* A /= K */
if (K == 1)
break;
/* lhi %r4,0 */
EMIT4(0xa7480000);
- /* d %r4,<d(K)>(%r13) */
- EMIT4_DISP(0x5d40d000, EMIT_CONST(K));
+ /* dl %r4,<d(K)>(%r13) */
+ EMIT6_DISP(0xe340d000, 0x0097, EMIT_CONST(K));
break;
case BPF_S_ALU_MOD_X: /* A %= X */
jit->seen |= SEEN_XREG | SEEN_RET0;
@@ -387,8 +387,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
EMIT4_PCREL(0xa7840000, (jit->ret0_ip - jit->prg));
/* lhi %r4,0 */
EMIT4(0xa7480000);
- /* dr %r4,%r12 */
- EMIT2(0x1d4c);
+ /* dlr %r4,%r12 */
+ EMIT4(0xb997004c);
/* lr %r5,%r4 */
EMIT2(0x1854);
break;
@@ -400,8 +400,8 @@ static int bpf_jit_insn(struct bpf_jit *jit, struct sock_filter *filter,
}
/* lhi %r4,0 */
EMIT4(0xa7480000);
- /* d %r4,<d(K)>(%r13) */
- EMIT4_DISP(0x5d40d000, EMIT_CONST(K));
+ /* dl %r4,<d(K)>(%r13) */
+ EMIT6_DISP(0xe340d000, 0x0097, EMIT_CONST(K));
/* lr %r5,%r4 */
EMIT2(0x1854);
break;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Engelmayer <[email protected]>
commit 267d29a69c6af39445f36102a832b25ed483f299 upstream.
Fix a memory leak in the ieee802154_add_iface() error handling path.
Detected by Coverity: CID 710490.
Signed-off-by: Christian Engelmayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ieee802154/nl-phy.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index 22b1a70..4efd237 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -224,8 +224,10 @@ static int ieee802154_add_iface(struct sk_buff *skb,
if (info->attrs[IEEE802154_ATTR_DEV_TYPE]) {
type = nla_get_u8(info->attrs[IEEE802154_ATTR_DEV_TYPE]);
- if (type >= __IEEE802154_DEV_MAX)
- return -EINVAL;
+ if (type >= __IEEE802154_DEV_MAX) {
+ rc = -EINVAL;
+ goto nla_put_failure;
+ }
}
dev = phy->add_iface(phy, devname, type);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit a926592f5e4e900f3fa903298c4619a131e60963 upstream.
rhine_reset_task() misses to disable the tx scheduler upon reset,
this can lead to a crash if work is still scheduled while we're resetting
the tx queue.
Fixes:
[ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c
[ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/via/via-rhine.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 685d8e2..b83c080 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -1615,6 +1615,7 @@ static void rhine_reset_task(struct work_struct *work)
goto out_unlock;
napi_disable(&rp->napi);
+ netif_tx_disable(dev);
spin_lock_bh(&rp->lock);
/* clear all descriptors */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Schmidt <[email protected]>
commit 95e92fd40c967c363ad66b2fd1ce4dcd68132e54 upstream.
bnx2x triggers warnings with CONFIG_DMA_API_DEBUG=y:
WARNING: CPU: 0 PID: 2253 at lib/dma-debug.c:887 check_unmap+0xf8/0x920()
bnx2x 0000:28:00.0: DMA-API: device driver frees DMA memory with
different size [device address=0x00000000da2b389e] [map size=1490 bytes]
[unmap size=66 bytes]
The reason is that bnx2x splits a TSO BD into two BDs (headers + data)
using one DMA mapping for both, but it uses only the length of the first
BD when unmapping.
This patch fixes the bug by unmapping the whole length of the two BDs.
Signed-off-by: Michal Schmidt <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Dmitry Kravkov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 4b0877e..6e49403 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -160,6 +160,7 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
struct sk_buff *skb = tx_buf->skb;
u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
int nbd;
+ u16 split_bd_len = 0;
/* prefetch skb end pointer to speedup dev_kfree_skb() */
prefetch(&skb->end);
@@ -167,10 +168,7 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
DP(NETIF_MSG_TX_DONE, "fp[%d]: pkt_idx %d buff @(%p)->skb %p\n",
txdata->txq_index, idx, tx_buf, skb);
- /* unmap first bd */
tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd;
- dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
- BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE);
nbd = le16_to_cpu(tx_start_bd->nbd) - 1;
#ifdef BNX2X_STOP_ON_ERROR
@@ -188,12 +186,19 @@ static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata,
--nbd;
bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
- /* ...and the TSO split header bd since they have no mapping */
+ /* TSO headers+data bds share a common mapping. See bnx2x_tx_split() */
if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) {
+ tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd;
+ split_bd_len = BD_UNMAP_LEN(tx_data_bd);
--nbd;
bd_idx = TX_BD(NEXT_TX_IDX(bd_idx));
}
+ /* unmap first bd */
+ dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd),
+ BD_UNMAP_LEN(tx_start_bd) + split_bd_len,
+ DMA_TO_DEVICE);
+
/* now free frags */
while (nbd > 0) {
--
1.8.3.2
Hi,
On 02/07/2014 12:47 PM, Luis Henriques wrote:
> 3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
> [...]
>
> +static int patch_nvhdmi(struct hda_codec *codec)
> +{
> + struct hdmi_spec *spec;
> + int err;
> +
> + err = patch_generic_hdmi(codec);
> + if (err)
> + return err;
> +
> + spec = codec->spec;
> +
> + return 0;
> +}
> [...]
Is it just me or is it that the 'spec' variable has no use?
--
Regards,
Levente Kurusa
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Neal Cardwell <[email protected]>
[ Based upon upstream commit 70315d22d3c7383f9a508d0aab21e2eb35b2303a ]
Fix inet_diag_dump_icsk() to reflect the fact that both TIME_WAIT and
FIN_WAIT2 connections are represented by inet_timewait_sock (not just
TIME_WAIT). Thus:
(a) We need to iterate through the time_wait buckets if the user wants
either TIME_WAIT or FIN_WAIT2. (Before fixing this, "ss -nemoi state
fin-wait-2" would not return any sockets, even if there were some in
FIN_WAIT2.)
(b) We need to check tw_substate to see if the user wants to dump
sockets in the particular substate (TIME_WAIT or FIN_WAIT2) that a
given connection is in. (Before fixing this, "ss -nemoi state
time-wait" would actually return sockets in state FIN_WAIT2.)
An analogous fix is in v3.13: 70315d22d3c7383f9a508d0aab21e2eb35b2303a
("inet_diag: fix inet_diag_dump_icsk() to use correct state for
timewait sockets") but that patch is quite different because 3.13 code
is very different in this area due to the unification of TCP hash
tables in 05dbc7b ("tcp/dccp: remove twchain") in v3.13-rc1.
I tested that this applies cleanly between v3.3 and v3.12, and tested
that it works in both 3.3 and 3.12. It does not apply cleanly to 3.2
and earlier (though it makes semantic sense), and semantically is not
the right fix for 3.13 and beyond (as mentioned above).
Signed-off-by: Neal Cardwell <[email protected]>
Cc: Eric Dumazet <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/ipv4/inet_diag.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 31cf54d..45dbdab 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -961,7 +961,7 @@ next_normal:
++num;
}
- if (r->idiag_states & TCPF_TIME_WAIT) {
+ if (r->idiag_states & (TCPF_TIME_WAIT | TCPF_FIN_WAIT2)) {
struct inet_timewait_sock *tw;
inet_twsk_for_each(tw, node,
@@ -971,6 +971,8 @@ next_normal:
if (num < s_num)
goto next_dying;
+ if (!(r->idiag_states & (1 << tw->tw_substate)))
+ goto next_dying;
if (r->sdiag_family != AF_UNSPEC &&
tw->tw_family != r->sdiag_family)
goto next_dying;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Courbot <[email protected]>
commit 1431574a1c4c669a0c198e4763627837416e4443 upstream.
When decompressing into memory, the output buffer length is set to some
arbitrarily high value (0x7fffffff) to indicate the output is, virtually,
unlimited in size.
The problem with this is that some platforms have their physical memory at
high physical addresses (0x80000000 or more), and that the output buffer
address and its "unlimited" length cannot be added without overflowing.
An example of this can be found in inflate_fast():
/* next_out is the output buffer address */
out = strm->next_out - OFF;
/* avail_out is the output buffer size. end will overflow if the output
* address is >= 0x80000104 */
end = out + (strm->avail_out - 257);
This has huge consequences on the performance of kernel decompression,
since the following exit condition of inflate_fast() will be always true:
} while (in < last && out < end);
Indeed, "end" has overflowed and is now always lower than "out". As a
result, inflate_fast() will return after processing one single byte of
input data, and will thus need to be called an unreasonably high number of
times. This probably went unnoticed because kernel decompression is fast
enough even with this issue.
Nonetheless, adjusting the output buffer length in such a way that the
above pointer arithmetic never overflows results in a kernel decompression
that is about 3 times faster on affected machines.
Signed-off-by: Alexandre Courbot <[email protected]>
Tested-by: Jon Medhurst <[email protected]>
Cc: Stephen Warren <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
lib/decompress_inflate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
index 19ff89e..d619b28 100644
--- a/lib/decompress_inflate.c
+++ b/lib/decompress_inflate.c
@@ -48,7 +48,7 @@ STATIC int INIT gunzip(unsigned char *buf, int len,
out_len = 0x8000; /* 32 K */
out_buf = malloc(out_len);
} else {
- out_len = 0x7fffffff; /* no limit */
+ out_len = ((size_t)~0) - (size_t)out_buf; /* no limit */
}
if (!out_buf) {
error("Out of memory while allocating output buffer");
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
commit ecd75ad514d73efc1bbcc5f10a13566c3ace5f53 upstream.
For some reason, some early WD drives spin up and down drives
erratically when the link is put into slumber mode which can reduce
the life expectancy of the device significantly. Unfortunately, we
don't have full list of devices and given the nature of the issue it'd
be better to err on the side of false positives than the other way
around. Let's disable LPM on all WD devices which match one of the
known problematic model prefixes and are SATA-I.
As horkage list doesn't support matching SATA capabilities, this is
implemented as two horkages - WD_BROKEN_LPM and NOLPM. The former is
set for the known prefixes and sets the latter if the matched device
is SATA-I.
Note that this isn't optimal as this disables all LPM operations and
partial link power state reportedly works fine on these; however, the
way LPM is implemented in libata makes it difficult to precisely map
libata LPM setting to specific link power state. Well, these devices
are already fairly outdated. Let's just disable whole LPM for now.
Signed-off-by: Tejun Heo <[email protected]>
Reported-and-tested-by: Nikos Barkas <[email protected]>
Reported-and-tested-by: Ioannis Barkas <[email protected]>
References: https://bugzilla.kernel.org/show_bug.cgi?id=57211
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/ata/libata-core.c | 27 +++++++++++++++++++++++++++
drivers/ata/libata-scsi.c | 18 +++++++++++++++---
include/linux/libata.h | 2 ++
3 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index bfd727a..71e85c2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2199,6 +2199,16 @@ int ata_dev_configure(struct ata_device *dev)
if (rc)
return rc;
+ /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */
+ if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) &&
+ (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2)
+ dev->horkage |= ATA_HORKAGE_NOLPM;
+
+ if (dev->horkage & ATA_HORKAGE_NOLPM) {
+ ata_dev_warn(dev, "LPM support broken, forcing max_power\n");
+ dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER;
+ }
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
@@ -4189,6 +4199,23 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
+ /*
+ * Some WD SATA-I drives spin up and down erratically when the link
+ * is put into the slumber mode. We don't have full list of the
+ * affected devices. Disable LPM if the device matches one of the
+ * known prefixes and is SATA-1. As a side effect LPM partial is
+ * lost too.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=57211
+ */
+ { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+ { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+ { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+ { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+ { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+ { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+ { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM },
+
/* End Marker */
{ }
};
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index df64fca..38a5a75 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -112,12 +112,14 @@ static const char *ata_lpm_policy_names[] = {
[ATA_LPM_MIN_POWER] = "min_power",
};
-static ssize_t ata_scsi_lpm_store(struct device *dev,
+static ssize_t ata_scsi_lpm_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct Scsi_Host *shost = class_to_shost(dev);
+ struct Scsi_Host *shost = class_to_shost(device);
struct ata_port *ap = ata_shost_to_port(shost);
+ struct ata_link *link;
+ struct ata_device *dev;
enum ata_lpm_policy policy;
unsigned long flags;
@@ -133,10 +135,20 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,
return -EINVAL;
spin_lock_irqsave(ap->lock, flags);
+
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
+ if (dev->horkage & ATA_HORKAGE_NOLPM) {
+ count = -EOPNOTSUPP;
+ goto out_unlock;
+ }
+ }
+ }
+
ap->target_lpm_policy = policy;
ata_port_schedule_eh(ap);
+out_unlock:
spin_unlock_irqrestore(ap->lock, flags);
-
return count;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4ea55bb..611d733 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -400,6 +400,8 @@ enum {
ATA_HORKAGE_DUMP_ID = (1 << 16), /* dump IDENTIFY data */
ATA_HORKAGE_MAX_SEC_LBA48 = (1 << 17), /* Set max sects to 65535 */
ATA_HORKAGE_ATAPI_DMADIR = (1 << 18), /* device requires dmadir */
+ ATA_HORKAGE_NOLPM = (1 << 20), /* don't use LPM */
+ ATA_HORKAGE_WD_BROKEN_LPM = (1 << 21), /* some WDs have broken LPM */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit dfd948e32af2e7b28bcd7a490c0a30d4b8df2a36 upstream.
We got a report that the pwritev syscall does not work correctly in
compat mode on s390.
It turned out that with commit 72ec35163f9f ("switch compat readv/writev
variants to COMPAT_SYSCALL_DEFINE") we lost the zero extension of a
couple of syscall parameters because the some parameter types haven't
been converted from unsigned long to compat_ulong_t.
This is needed for architectures where the ABI requires that the caller
of a function performed zero and/or sign extension to 64 bit of all
parameters.
Signed-off-by: Heiko Carstens <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/read_write.c | 16 ++++++++--------
include/linux/compat.h | 16 ++++++++--------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/fs/read_write.c b/fs/read_write.c
index 122a384..0bc0e7e 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -980,9 +980,9 @@ out:
return ret;
}
-COMPAT_SYSCALL_DEFINE3(readv, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE3(readv, compat_ulong_t, fd,
const struct compat_iovec __user *,vec,
- unsigned long, vlen)
+ compat_ulong_t, vlen)
{
struct fd f = fdget(fd);
ssize_t ret;
@@ -1017,9 +1017,9 @@ COMPAT_SYSCALL_DEFINE4(preadv64, unsigned long, fd,
return ret;
}
-COMPAT_SYSCALL_DEFINE5(preadv, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE5(preadv, compat_ulong_t, fd,
const struct compat_iovec __user *,vec,
- unsigned long, vlen, u32, pos_low, u32, pos_high)
+ compat_ulong_t, vlen, u32, pos_low, u32, pos_high)
{
loff_t pos = ((loff_t)pos_high << 32) | pos_low;
return compat_sys_preadv64(fd, vec, vlen, pos);
@@ -1047,9 +1047,9 @@ out:
return ret;
}
-COMPAT_SYSCALL_DEFINE3(writev, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE3(writev, compat_ulong_t, fd,
const struct compat_iovec __user *, vec,
- unsigned long, vlen)
+ compat_ulong_t, vlen)
{
struct fd f = fdget(fd);
ssize_t ret;
@@ -1084,9 +1084,9 @@ COMPAT_SYSCALL_DEFINE4(pwritev64, unsigned long, fd,
return ret;
}
-COMPAT_SYSCALL_DEFINE5(pwritev, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE5(pwritev, compat_ulong_t, fd,
const struct compat_iovec __user *,vec,
- unsigned long, vlen, u32, pos_low, u32, pos_high)
+ compat_ulong_t, vlen, u32, pos_low, u32, pos_high)
{
loff_t pos = ((loff_t)pos_high << 32) | pos_low;
return compat_sys_pwritev64(fd, vec, vlen, pos);
diff --git a/include/linux/compat.h b/include/linux/compat.h
index ec1aee4..caa5385 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -326,16 +326,16 @@ asmlinkage long compat_sys_keyctl(u32 option,
u32 arg2, u32 arg3, u32 arg4, u32 arg5);
asmlinkage long compat_sys_ustat(unsigned dev, struct compat_ustat __user *u32);
-asmlinkage ssize_t compat_sys_readv(unsigned long fd,
- const struct compat_iovec __user *vec, unsigned long vlen);
-asmlinkage ssize_t compat_sys_writev(unsigned long fd,
- const struct compat_iovec __user *vec, unsigned long vlen);
-asmlinkage ssize_t compat_sys_preadv(unsigned long fd,
+asmlinkage ssize_t compat_sys_readv(compat_ulong_t fd,
+ const struct compat_iovec __user *vec, compat_ulong_t vlen);
+asmlinkage ssize_t compat_sys_writev(compat_ulong_t fd,
+ const struct compat_iovec __user *vec, compat_ulong_t vlen);
+asmlinkage ssize_t compat_sys_preadv(compat_ulong_t fd,
const struct compat_iovec __user *vec,
- unsigned long vlen, u32 pos_low, u32 pos_high);
-asmlinkage ssize_t compat_sys_pwritev(unsigned long fd,
+ compat_ulong_t vlen, u32 pos_low, u32 pos_high);
+asmlinkage ssize_t compat_sys_pwritev(compat_ulong_t fd,
const struct compat_iovec __user *vec,
- unsigned long vlen, u32 pos_low, u32 pos_high);
+ compat_ulong_t vlen, u32 pos_low, u32 pos_high);
asmlinkage long comat_sys_lseek(unsigned int, compat_off_t, unsigned int);
asmlinkage long compat_sys_execve(const char __user *filename, const compat_uptr_t __user *argv,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit d8d14bd09cddbaf0168d61af638455a26bd027ff upstream.
Commit d5dc77bfeeab ("consolidate compat lookup_dcookie()") coverted all
architectures to the new compat_sys_lookup_dcookie() syscall.
The "len" paramater of the new compat syscall must have the type
compat_size_t in order to enforce zero extension for architectures where
the ABI requires that the caller of a function performed zero and/or
sign extension to 64 bit of all parameters.
Signed-off-by: Heiko Carstens <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/dcookies.c | 2 +-
include/linux/compat.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/dcookies.c b/fs/dcookies.c
index ab5954b..ac44a69 100644
--- a/fs/dcookies.c
+++ b/fs/dcookies.c
@@ -204,7 +204,7 @@ out:
}
#ifdef CONFIG_COMPAT
-COMPAT_SYSCALL_DEFINE4(lookup_dcookie, u32, w0, u32, w1, char __user *, buf, size_t, len)
+COMPAT_SYSCALL_DEFINE4(lookup_dcookie, u32, w0, u32, w1, char __user *, buf, compat_size_t, len)
{
#ifdef __BIG_ENDIAN
return sys_lookup_dcookie(((u64)w0 << 32) | w1, buf, len);
diff --git a/include/linux/compat.h b/include/linux/compat.h
index caa5385..df70600 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -421,7 +421,7 @@ extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-asmlinkage long compat_sys_lookup_dcookie(u32, u32, char __user *, size_t);
+asmlinkage long compat_sys_lookup_dcookie(u32, u32, char __user *, compat_size_t);
/*
* epoll (fs/eventpoll.c) compat bits follow ...
*/
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 623c8263376c0b8a4b0c220232e7313d762cd0cc upstream.
Some PL2303 devices are known to lose bytes if you change serial
settings even to the same values as before. Avoid this by comparing the
encoded settings with the previsouly used ones before configuring the
device.
The common case was fixed by commit bf5e5834bffc6 ("pl2303: Fix mode
switching regression"), but this problem was still possible to trigger,
for instance, by using the TCSETS2-interface to repeatedly request
115201 baud, which gets mapped to 115200 and thus always triggers a
settings update.
Cc: Frank Schäfer <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/pl2303.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 28088cc..0852bb3 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -141,6 +141,8 @@ struct pl2303_private {
spinlock_t lock;
u8 line_control;
u8 line_status;
+
+ u8 line_settings[7];
};
static int pl2303_vendor_read(__u16 value, __u16 index,
@@ -280,10 +282,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
int baud_floor, baud_ceil;
int k;
- /* The PL2303 is reported to lose bytes if you change
- serial settings even to the same values as before. Thus
- we actually need to filter in this specific case */
-
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
@@ -420,10 +418,29 @@ static void pl2303_set_termios(struct tty_struct *tty,
dev_dbg(&port->dev, "parity = none\n");
}
- i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
- 0, 0, buf, 7, 100);
- dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i);
+ /*
+ * Some PL2303 are known to lose bytes if you change serial settings
+ * even to the same values as before. Thus we actually need to filter
+ * in this specific case.
+ *
+ * Note that the tty_termios_hw_change check above is not sufficient
+ * as a previously requested baud rate may differ from the one
+ * actually used (and stored in old_termios).
+ *
+ * NOTE: No additional locking needed for line_settings as it is
+ * only used in set_termios, which is serialised against itself.
+ */
+ if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
+ i = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
+ 0, 0, buf, 7, 100);
+
+ dev_dbg(&port->dev, "0x21:0x20:0:0 %d\n", i);
+
+ if (i == 7)
+ memcpy(priv->line_settings, buf, 7);
+ }
/* change control lines if we are switching to or from B0 */
spin_lock_irqsave(&priv->lock, flags);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: David Rientjes <[email protected]>
commit 8790c71a18e5d2d93532ae250bcf5eddbba729cd upstream.
As a result of commit 5606e3877ad8 ("mm: numa: Migrate on reference
policy"), /proc/<pid>/numa_maps prints the mempolicy for any <pid> as
"prefer:N" for the local node, N, of the process reading the file.
This should only be printed when the mempolicy of <pid> is
MPOL_PREFERRED for node N.
If the process is actually only using the default mempolicy for local
node allocation, make sure "default" is printed as expected.
Signed-off-by: David Rientjes <[email protected]>
Reported-by: Robert Lippert <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11: used David Rientjes's backport to 3.10 and
3.12 stable trees. ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/mempolicy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index bfa95cf..bfb3238 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2806,7 +2806,7 @@ int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol)
*/
VM_BUG_ON(maxlen < strlen("interleave") + strlen("relative") + 16);
- if (!pol || pol == &default_policy)
+ if (!pol || pol == &default_policy || (pol->flags & MPOL_F_MORON))
mode = MPOL_DEFAULT;
else
mode = pol->mode;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ertman <[email protected]>
commit 9e6c3b63399dd424d33a34e08b77f2cab0b84cdc upstream.
This patch is to fix a compiler warning of __bad_udelay due to a value
of >999 being passed as a parameter to udelay() in the function
e1000e_phy_has_link_generic(). This affects the gcc compiler when
it is given a flag of -O3 and the icc compiler.
This patch is also making the change from mdelay() to msleep() in the
same function, since it was determined though code inspection that this
function is never called in atomic context.
Signed-off-by: David Ertman <[email protected]>
Acked-by: Bruce Allan <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/intel/e1000e/phy.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
index da2be59..20e71f4 100644
--- a/drivers/net/ethernet/intel/e1000e/phy.c
+++ b/drivers/net/ethernet/intel/e1000e/phy.c
@@ -1757,19 +1757,23 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
* it across the board.
*/
ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
- if (ret_val)
+ if (ret_val) {
/* If the first read fails, another entity may have
* ownership of the resources, wait and try again to
* see if they have relinquished the resources yet.
*/
- udelay(usec_interval);
+ if (usec_interval >= 1000)
+ msleep(usec_interval / 1000);
+ else
+ udelay(usec_interval);
+ }
ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
if (ret_val)
break;
if (phy_status & BMSR_LSTATUS)
break;
if (usec_interval >= 1000)
- mdelay(usec_interval / 1000);
+ msleep(usec_interval / 1000);
else
udelay(usec_interval);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Aneesh Kumar K.V" <[email protected]>
commit b3084f4db3aeb991c507ca774337c7e7893ed04f upstream.
This patch fix the below crash
NIP [c00000000004cee4] .__hash_page_thp+0x2a4/0x440
LR [c0000000000439ac] .hash_page+0x18c/0x5e0
...
Call Trace:
[c000000736103c40] [00001ffffb000000] 0x1ffffb000000(unreliable)
[437908.479693] [c000000736103d50] [c0000000000439ac] .hash_page+0x18c/0x5e0
[437908.479699] [c000000736103e30] [c00000000000924c] .do_hash_page+0x4c/0x58
On ppc64 we use the pgtable for storing the hpte slot information and
store address to the pgtable at a constant offset (PTRS_PER_PMD) from
pmd. On mremap, when we switch the pmd, we need to withdraw and deposit
the pgtable again, so that we find the pgtable at PTRS_PER_PMD offset
from new pmd.
We also want to move the withdraw and deposit before the set_pmd so
that, when page fault find the pmd as trans huge we can be sure that
pgtable can be located at the offset.
Signed-off-by: Aneesh Kumar K.V <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
[ aneesh: variant of upstream SHA1: b3084f4db3aeb991c507ca774337c7e7893ed04f
for 3.11 stable series ]
Signed-off-by: Luis Henriques <[email protected]>
---
arch/Kconfig | 3 +++
arch/powerpc/platforms/Kconfig.cputype | 1 +
mm/huge_memory.c | 12 ++++++++++++
3 files changed, 16 insertions(+)
diff --git a/arch/Kconfig b/arch/Kconfig
index 1feb169..c5863b3 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -368,6 +368,9 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE
config HAVE_ARCH_SOFT_DIRTY
bool
+config ARCH_THP_MOVE_PMD_ALWAYS_WITHDRAW
+ bool
+
config HAVE_MOD_ARCH_SPECIFIC
bool
help
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 47d9a03..d11a34b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -71,6 +71,7 @@ config PPC_BOOK3S_64
select PPC_FPU
select PPC_HAVE_PMU_SUPPORT
select SYS_SUPPORTS_HUGETLBFS
+ select ARCH_THP_MOVE_PMD_ALWAYS_WITHDRAW
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if PPC_64K_PAGES
config PPC_BOOK3E_64
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 5e91a87..46a02bf 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1486,8 +1486,20 @@ int move_huge_pmd(struct vm_area_struct *vma, struct vm_area_struct *new_vma,
ret = __pmd_trans_huge_lock(old_pmd, vma);
if (ret == 1) {
+#ifdef CONFIG_ARCH_THP_MOVE_PMD_ALWAYS_WITHDRAW
+ pgtable_t pgtable;
+#endif
pmd = pmdp_get_and_clear(mm, old_addr, old_pmd);
VM_BUG_ON(!pmd_none(*new_pmd));
+#ifdef CONFIG_ARCH_THP_MOVE_PMD_ALWAYS_WITHDRAW
+ /*
+ * Archs like ppc64 use pgtable to store per pmd
+ * specific information. So when we switch the pmd,
+ * we should also withdraw and deposit the pgtable
+ */
+ pgtable = pgtable_trans_huge_withdraw(mm, old_pmd);
+ pgtable_trans_huge_deposit(mm, new_pmd, pgtable);
+#endif
set_pmd_at(mm, new_addr, new_pmd, pmd_mksoft_dirty(pmd));
spin_unlock(&mm->page_table_lock);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
commit 57737c49dd72c96cfbcd4f66559f3ffc399aeb4f upstream.
This commit:
f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap
caused negative caching side-effects, e.g. hanging processes with expect and
too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems.
This patch now partly reverts it and has been in production use on our debian buildd
makeservers since a week without any major problems.
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/parisc/include/asm/cacheflush.h | 2 --
arch/parisc/include/asm/page.h | 3 ++-
arch/parisc/kernel/cache.c | 14 ++++++++++++++
3 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 2f9b751..de65f66 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -132,7 +132,6 @@ void mark_rodata_ro(void);
static inline void *kmap(struct page *page)
{
might_sleep();
- flush_dcache_page(page);
return page_address(page);
}
@@ -144,7 +143,6 @@ static inline void kunmap(struct page *page)
static inline void *kmap_atomic(struct page *page)
{
pagefault_disable();
- flush_dcache_page(page);
return page_address(page);
}
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index c53fc63..637fe03 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -29,7 +29,8 @@ struct page;
void clear_page_asm(void *page);
void copy_page_asm(void *to, void *from);
#define clear_user_page(vto, vaddr, page) clear_page_asm(vto)
-#define copy_user_page(vto, vfrom, vaddr, page) copy_page_asm(vto, vfrom)
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *pg);
/* #define CONFIG_PARISC_TMPALIAS */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index a725455..ac87a40 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -388,6 +388,20 @@ void flush_kernel_dcache_page_addr(void *addr)
}
EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *pg)
+{
+ /* Copy using kernel mapping. No coherency is needed (all in
+ kunmap) for the `to' page. However, the `from' page needs to
+ be flushed through a mapping equivalent to the user mapping
+ before it can be accessed through the kernel mapping. */
+ preempt_disable();
+ flush_dcache_page_asm(__pa(vfrom), vaddr);
+ preempt_enable();
+ copy_page_asm(vto, vfrom);
+}
+EXPORT_SYMBOL(copy_user_page);
+
void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
{
unsigned long flags;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Aristeu Rozanski <[email protected]>
commit 90ed4988b8c030d65b41b7d13140e9376dc6ec5a upstream.
In case the device 0, function 1 is not found using pci_get_device(),
pci_scan_single_device() will be used but, differently than
pci_get_device(), it allocates a pci_dev but doesn't does bump the usage
count on the pci_dev and after few module removals and loads the pci_dev
will be freed.
Signed-off-by: Aristeu Rozanski <[email protected]>
Reviewed-by: mark gross <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Jean Delvare <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/edac/e752x_edac.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 644fec5..f1e9d7b 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -1182,9 +1182,11 @@ static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
pvt->dev_info->err_dev, pvt->bridge_ck);
- if (pvt->bridge_ck == NULL)
+ if (pvt->bridge_ck == NULL) {
pvt->bridge_ck = pci_scan_single_device(pdev->bus,
PCI_DEVFN(0, 1));
+ pci_dev_get(pvt->bridge_ck);
+ }
if (pvt->bridge_ck == NULL) {
e752x_printk(KERN_ERR, "error reporting device not found:"
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: PaX Team <[email protected]>
commit 2def2ef2ae5f3990aabdbe8a755911902707d268 upstream.
The x32 case for the recvmsg() timout handling is broken:
asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
unsigned int vlen, unsigned int flags,
struct compat_timespec __user *timeout)
{
int datagrams;
struct timespec ktspec;
if (flags & MSG_CMSG_COMPAT)
return -EINVAL;
if (COMPAT_USE_64BIT_TIME)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT,
(struct timespec *) timeout);
...
The timeout pointer parameter is provided by userland (hence the __user
annotation) but for x32 syscalls it's simply cast to a kernel pointer
and is passed to __sys_recvmmsg which will eventually directly
dereference it for both reading and writing. Other callers to
__sys_recvmmsg properly copy from userland to the kernel first.
The bug was introduced by commit ee4fa23c4bfc ("compat: Use
COMPAT_USE_64BIT_TIME in net/compat.c") and should affect all kernels
since 3.4 (and perhaps vendor kernels if they backported x32 support
along with this code).
Note that CONFIG_X86_X32_ABI gets enabled at build time and only if
CONFIG_X86_X32 is enabled and ld can build x32 executables.
Other uses of COMPAT_USE_64BIT_TIME seem fine.
This addresses CVE-2014-0038.
Signed-off-by: PaX Team <[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/compat.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/net/compat.c b/net/compat.c
index dd32e34..f50161f 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -780,21 +780,16 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
if (flags & MSG_CMSG_COMPAT)
return -EINVAL;
- if (COMPAT_USE_64BIT_TIME)
- return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
- flags | MSG_CMSG_COMPAT,
- (struct timespec *) timeout);
-
if (timeout == NULL)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT, NULL);
- if (get_compat_timespec(&ktspec, timeout))
+ if (compat_get_timespec(&ktspec, timeout))
return -EFAULT;
datagrams = __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT, &ktspec);
- if (datagrams > 0 && put_compat_timespec(&ktspec, timeout))
+ if (datagrams > 0 && compat_put_timespec(&ktspec, timeout))
datagrams = -EFAULT;
return datagrams;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilia Mirkin <[email protected]>
commit 5d2f4767c4eacab351b8450b0de4d3261fe1a957 upstream.
The only BIOS on record that needs the 14 offset has a bios major
version 2 but BMP version 1.01. Another bunch of BIOSes that need the 18
offset have BMP version 2.01 or 5.01 or higher. So instead of looking at the
bios major version, look at the BMP version. BIOSes with BMP version 0
do not contain a detectable script, so always return 0 for them.
See https://bugs.freedesktop.org/show_bug.cgi?id=68835
Reported-by: Mauro Molinari <[email protected]>
Signed-off-by: Ilia Mirkin <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/nouveau/core/subdev/bios/init.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
index 892070a..c5c5ce1 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/init.c
@@ -365,13 +365,13 @@ static u16
init_script(struct nouveau_bios *bios, int index)
{
struct nvbios_init init = { .bios = bios };
- u16 data;
+ u16 bmp_ver = bmp_version(bios), data;
- if (bmp_version(bios) && bmp_version(bios) < 0x0510) {
- if (index > 1)
+ if (bmp_ver && bmp_ver < 0x0510) {
+ if (index > 1 || bmp_ver < 0x0100)
return 0x0000;
- data = bios->bmp_offset + (bios->version.major < 2 ? 14 : 18);
+ data = bios->bmp_offset + (bmp_ver < 0x0200 ? 14 : 18);
return nv_ro16(bios, data + (index * 2));
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Minchan Kim <[email protected]>
commit da4a04126baa3be03bc566d4a2ee0944c5e783d0 upstream.
Dan and Sergey reported that there is a racy between reset and flushing
of pending work so that it could make oops by freeing zram->meta in
reset while zram_slot_free can access zram->meta if new request is
adding during the race window.
This patch moves flush after taking init_lock so it prevents new request
so that it closes the race.
Signed-off-by: Minchan Kim <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Cc: Nitin Gupta <[email protected]>
Cc: Jerome Marchand <[email protected]>
Tested-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11: zram is still a staging driver in 3.11 ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/zram/zram_drv.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index dda8771..fc540ea 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -551,14 +551,14 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
size_t index;
struct zram_meta *meta;
- flush_work(&zram->free_work);
-
down_write(&zram->init_lock);
if (!zram->init_done) {
up_write(&zram->init_lock);
return;
}
+ flush_work(&zram->free_work);
+
meta = zram->meta;
zram->init_done = 0;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: David Rientjes <[email protected]>
commit 778c14affaf94a9e4953179d3e13a544ccce7707 upstream.
A 3% of system memory bonus is sometimes too excessive in comparison to
other processes.
With commit a63d83f427fb ("oom: badness heuristic rewrite"), the OOM
killer tries to avoid killing privileged tasks by subtracting 3% of
overall memory (system or cgroup) from their per-task consumption. But
as a result, all root tasks that consume less than 3% of overall memory
are considered equal, and so it only takes 33+ privileged tasks pushing
the system out of memory for the OOM killer to do something stupid and
kill dhclient or other root-owned processes. For example, on a 32G
machine it can't tell the difference between the 1M agetty and the 10G
fork bomb member.
The changelog describes this 3% boost as the equivalent to the global
overcommit limit being 3% higher for privileged tasks, but this is not
the same as discounting 3% of overall memory from _every privileged task
individually_ during OOM selection.
Replace the 3% of system memory bonus with a 3% of current memory usage
bonus.
By giving root tasks a bonus that is proportional to their actual size,
they remain comparable even when relatively small. In the example
above, the OOM killer will discount the 1M agetty's 256 badness points
down to 179, and the 10G fork bomb's 262144 points down to 183500 points
and make the right choice, instead of discounting both to 0 and killing
agetty because it's first in the task list.
Signed-off-by: David Rientjes <[email protected]>
Reported-by: Johannes Weiner <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
Documentation/filesystems/proc.txt | 4 ++--
mm/oom_kill.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index fcc22c9..9198f01 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1377,8 +1377,8 @@ may allocate from based on an estimation of its current memory and swap use.
For example, if a task is using all allowed memory, its badness score will be
1000. If it is using half of its allowed memory, its score will be 500.
-There is an additional factor included in the badness score: root
-processes are given 3% extra memory over other tasks.
+There is an additional factor included in the badness score: the current memory
+and swap usage is discounted by 3% for root processes.
The amount of "allowed" memory depends on the context in which the oom killer
was called. If it is due to the memory assigned to the allocating task's cpuset
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 79e451a..dfa94ed 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -170,7 +170,7 @@ unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg,
* implementation used by LSMs.
*/
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
- adj -= 30;
+ points -= (points * 3) / 100;
/* Normalize to oom_score_adj units */
adj *= totalpages / 1000;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 2cbe5c76fc5e38e9af4b709593146e4b8272b69e upstream.
Previously, hpfs scanned all bitmaps each time the user asked for free
space using statfs. This patch changes it so that hpfs scans the
bitmaps only once, remembes the free space and on next invocation of
statfs it returns the value instantly.
New versions of wine are hammering on the statfs syscall very heavily,
making some games unplayable when they're stored on hpfs, with load
times in minutes.
This should be backported to the stable kernels because it fixes
user-visible problem (excessive level load times in wine).
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/hpfs/alloc.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++--
fs/hpfs/hpfs_fn.h | 2 +-
fs/hpfs/super.c | 29 ++++++++++++++++++------
3 files changed, 87 insertions(+), 10 deletions(-)
diff --git a/fs/hpfs/alloc.c b/fs/hpfs/alloc.c
index cdb84a8..58b5106 100644
--- a/fs/hpfs/alloc.c
+++ b/fs/hpfs/alloc.c
@@ -8,6 +8,58 @@
#include "hpfs_fn.h"
+static void hpfs_claim_alloc(struct super_block *s, secno sec)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ if (sbi->sb_n_free != (unsigned)-1) {
+ if (unlikely(!sbi->sb_n_free)) {
+ hpfs_error(s, "free count underflow, allocating sector %08x", sec);
+ sbi->sb_n_free = -1;
+ return;
+ }
+ sbi->sb_n_free--;
+ }
+}
+
+static void hpfs_claim_free(struct super_block *s, secno sec)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ if (sbi->sb_n_free != (unsigned)-1) {
+ if (unlikely(sbi->sb_n_free >= sbi->sb_fs_size)) {
+ hpfs_error(s, "free count overflow, freeing sector %08x", sec);
+ sbi->sb_n_free = -1;
+ return;
+ }
+ sbi->sb_n_free++;
+ }
+}
+
+static void hpfs_claim_dirband_alloc(struct super_block *s, secno sec)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ if (sbi->sb_n_free_dnodes != (unsigned)-1) {
+ if (unlikely(!sbi->sb_n_free_dnodes)) {
+ hpfs_error(s, "dirband free count underflow, allocating sector %08x", sec);
+ sbi->sb_n_free_dnodes = -1;
+ return;
+ }
+ sbi->sb_n_free_dnodes--;
+ }
+}
+
+static void hpfs_claim_dirband_free(struct super_block *s, secno sec)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ if (sbi->sb_n_free_dnodes != (unsigned)-1) {
+ if (unlikely(sbi->sb_n_free_dnodes >= sbi->sb_dirband_size / 4)) {
+ hpfs_error(s, "dirband free count overflow, freeing sector %08x", sec);
+ sbi->sb_n_free_dnodes = -1;
+ return;
+ }
+ sbi->sb_n_free_dnodes++;
+ }
+}
+
/*
* Check if a sector is allocated in bitmap
* This is really slow. Turned on only if chk==2
@@ -203,9 +255,15 @@ secno hpfs_alloc_sector(struct super_block *s, secno near, unsigned n, int forwa
}
sec = 0;
ret:
+ if (sec) {
+ i = 0;
+ do
+ hpfs_claim_alloc(s, sec + i);
+ while (unlikely(++i < n));
+ }
if (sec && f_p) {
for (i = 0; i < forward; i++) {
- if (!hpfs_alloc_if_possible(s, sec + i + 1)) {
+ if (!hpfs_alloc_if_possible(s, sec + n + i)) {
hpfs_error(s, "Prealloc doesn't work! Wanted %d, allocated at %08x, can't allocate %d", forward, sec, i);
sec = 0;
break;
@@ -228,6 +286,7 @@ static secno alloc_in_dirband(struct super_block *s, secno near)
nr >>= 2;
sec = alloc_in_bmp(s, (~0x3fff) | nr, 1, 0);
if (!sec) return 0;
+ hpfs_claim_dirband_alloc(s, sec);
return ((sec & 0x3fff) << 2) + sbi->sb_dirband_start;
}
@@ -242,6 +301,7 @@ int hpfs_alloc_if_possible(struct super_block *s, secno sec)
bmp[(sec & 0x3fff) >> 5] &= cpu_to_le32(~(1 << (sec & 0x1f)));
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
+ hpfs_claim_alloc(s, sec);
return 1;
}
hpfs_brelse4(&qbh);
@@ -275,6 +335,7 @@ void hpfs_free_sectors(struct super_block *s, secno sec, unsigned n)
return;
}
bmp[(sec & 0x3fff) >> 5] |= cpu_to_le32(1 << (sec & 0x1f));
+ hpfs_claim_free(s, sec);
if (!--n) {
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
@@ -359,6 +420,7 @@ void hpfs_free_dnode(struct super_block *s, dnode_secno dno)
bmp[ssec >> 5] |= cpu_to_le32(1 << (ssec & 0x1f));
hpfs_mark_4buffers_dirty(&qbh);
hpfs_brelse4(&qbh);
+ hpfs_claim_dirband_free(s, dno);
}
}
@@ -366,7 +428,7 @@ struct dnode *hpfs_alloc_dnode(struct super_block *s, secno near,
dnode_secno *dno, struct quad_buffer_head *qbh)
{
struct dnode *d;
- if (hpfs_count_one_bitmap(s, hpfs_sb(s)->sb_dmap) > FREE_DNODES_ADD) {
+ if (hpfs_get_free_dnodes(s) > FREE_DNODES_ADD) {
if (!(*dno = alloc_in_dirband(s, near)))
if (!(*dno = hpfs_alloc_sector(s, near, 4, 0))) return NULL;
} else {
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index 1b39863..c65f0bf 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -311,7 +311,7 @@ static inline struct hpfs_sb_info *hpfs_sb(struct super_block *sb)
__printf(2, 3)
void hpfs_error(struct super_block *, const char *, ...);
int hpfs_stop_cycles(struct super_block *, int, int *, int *, char *);
-unsigned hpfs_count_one_bitmap(struct super_block *, secno);
+unsigned hpfs_get_free_dnodes(struct super_block *);
/*
* local time (HPFS) to GMT (Unix)
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index 4334cda..3d6f897 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -115,7 +115,7 @@ static void hpfs_put_super(struct super_block *s)
kfree(sbi);
}
-unsigned hpfs_count_one_bitmap(struct super_block *s, secno secno)
+static unsigned hpfs_count_one_bitmap(struct super_block *s, secno secno)
{
struct quad_buffer_head qbh;
unsigned long *bits;
@@ -123,7 +123,7 @@ unsigned hpfs_count_one_bitmap(struct super_block *s, secno secno)
bits = hpfs_map_4sectors(s, secno, &qbh, 0);
if (!bits)
- return 0;
+ return (unsigned)-1;
count = bitmap_weight(bits, 2048 * BITS_PER_BYTE);
hpfs_brelse4(&qbh);
return count;
@@ -138,30 +138,45 @@ static unsigned count_bitmaps(struct super_block *s)
hpfs_prefetch_bitmap(s, n);
}
for (n = 0; n < n_bands; n++) {
+ unsigned c;
hpfs_prefetch_bitmap(s, n + COUNT_RD_AHEAD);
- count += hpfs_count_one_bitmap(s, le32_to_cpu(hpfs_sb(s)->sb_bmp_dir[n]));
+ c = hpfs_count_one_bitmap(s, le32_to_cpu(hpfs_sb(s)->sb_bmp_dir[n]));
+ if (c != (unsigned)-1)
+ count += c;
}
return count;
}
+unsigned hpfs_get_free_dnodes(struct super_block *s)
+{
+ struct hpfs_sb_info *sbi = hpfs_sb(s);
+ if (sbi->sb_n_free_dnodes == (unsigned)-1) {
+ unsigned c = hpfs_count_one_bitmap(s, sbi->sb_dmap);
+ if (c == (unsigned)-1)
+ return 0;
+ sbi->sb_n_free_dnodes = c;
+ }
+ return sbi->sb_n_free_dnodes;
+}
+
static int hpfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *s = dentry->d_sb;
struct hpfs_sb_info *sbi = hpfs_sb(s);
u64 id = huge_encode_dev(s->s_bdev->bd_dev);
+
hpfs_lock(s);
- /*if (sbi->sb_n_free == -1) {*/
+ if (sbi->sb_n_free == (unsigned)-1)
sbi->sb_n_free = count_bitmaps(s);
- sbi->sb_n_free_dnodes = hpfs_count_one_bitmap(s, sbi->sb_dmap);
- /*}*/
+
buf->f_type = s->s_magic;
buf->f_bsize = 512;
buf->f_blocks = sbi->sb_fs_size;
buf->f_bfree = sbi->sb_n_free;
buf->f_bavail = sbi->sb_n_free;
buf->f_files = sbi->sb_dirband_size / 4;
- buf->f_ffree = sbi->sb_n_free_dnodes;
+ buf->f_ffree = hpfs_get_free_dnodes(s);
buf->f_fsid.val[0] = (u32)id;
buf->f_fsid.val[1] = (u32)(id >> 32);
buf->f_namelen = 254;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Jones <[email protected]>
commit 0dce7cd67fd9055c4a2ff278f8af1431e646d346 upstream.
Commit e66d2ae7c67bd moved the assignment
vcpu->arch.apic_base = value above a condition with
(vcpu->arch.apic_base ^ value), causing that check
to always fail. Use old_value, vcpu->arch.apic_base's
old value, in the condition instead.
Signed-off-by: Andrew Jones <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Cc: Radim Krčmář <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kvm/lapic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index f213cbc..256816b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1366,7 +1366,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
vcpu->arch.apic_base = value;
/* update jump label if enable bit changes */
- if ((vcpu->arch.apic_base ^ value) & MSR_IA32_APICBASE_ENABLE) {
+ if ((old_value ^ value) & MSR_IA32_APICBASE_ENABLE) {
if (value & MSR_IA32_APICBASE_ENABLE)
static_key_slow_dec_deferred(&apic_hw_disabled);
else
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Vagin <[email protected]>
commit 24f91eba18bbfdb27e71a1aae5b3a61b67fcd091 upstream.
The SOFT_DIRTY bit shows that the content of memory was changed after a
defined point in the past. mprotect() doesn't change the content of
memory, so it must not change the SOFT_DIRTY bit.
This bug causes a malfunction: on the first iteration all pages are
dumped. On other iterations only pages with the SOFT_DIRTY bit are
dumped. So if the SOFT_DIRTY bit is cleared from a page by mistake, the
page is not dumped and its content will be restored incorrectly.
This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify()
is called only for present pages.
Fixes commit 0f8975ec4db2 ("mm: soft-dirty bits for user memory changes
tracking").
Signed-off-by: Andrey Vagin <[email protected]>
Acked-by: Cyrill Gorcunov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Wen Congyang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/include/asm/pgtable_types.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index f4843e0..4e700b1 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -118,7 +118,8 @@
/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT | \
- _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
+ _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY | \
+ _PAGE_SOFT_DIRTY)
#define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
#define _PAGE_CACHE_MASK (_PAGE_PCD | _PAGE_PWT)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Grover <[email protected]>
commit ee291e63293146db64668e8d65eb35c97e8324f4 upstream.
When creating network portals rapidly, such as when restoring a
configuration, LIO's code to reuse existing portals can return a false
negative if the thread hasn't run yet and set np_thread_state to
ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack
when attempting to bind to the same address/port.
This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list,
so even if the thread hasn't run yet, iscsit_get_np will return the
existing np.
Also, convert np_lock -> np_mutex + hold across adding new net portal
to g_np_list to prevent a race where two threads may attempt to create
the same network portal, resulting in one of them failing.
(nab: Add missing mutex_unlocks in iscsit_add_np failure paths)
(DanC: Fix incorrect spin_unlock -> spin_unlock_bh)
Signed-off-by: Andy Grover <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index db96e21..9c6136e 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -54,7 +54,7 @@
static LIST_HEAD(g_tiqn_list);
static LIST_HEAD(g_np_list);
static DEFINE_SPINLOCK(tiqn_lock);
-static DEFINE_SPINLOCK(np_lock);
+static DEFINE_MUTEX(np_lock);
static struct idr tiqn_idr;
struct idr sess_idr;
@@ -303,6 +303,9 @@ bool iscsit_check_np_match(
return false;
}
+/*
+ * Called with mutex np_lock held
+ */
static struct iscsi_np *iscsit_get_np(
struct __kernel_sockaddr_storage *sockaddr,
int network_transport)
@@ -310,11 +313,10 @@ static struct iscsi_np *iscsit_get_np(
struct iscsi_np *np;
bool match;
- spin_lock_bh(&np_lock);
list_for_each_entry(np, &g_np_list, np_list) {
- spin_lock(&np->np_thread_lock);
+ spin_lock_bh(&np->np_thread_lock);
if (np->np_thread_state != ISCSI_NP_THREAD_ACTIVE) {
- spin_unlock(&np->np_thread_lock);
+ spin_unlock_bh(&np->np_thread_lock);
continue;
}
@@ -326,13 +328,11 @@ static struct iscsi_np *iscsit_get_np(
* while iscsi_tpg_add_network_portal() is called.
*/
np->np_exports++;
- spin_unlock(&np->np_thread_lock);
- spin_unlock_bh(&np_lock);
+ spin_unlock_bh(&np->np_thread_lock);
return np;
}
- spin_unlock(&np->np_thread_lock);
+ spin_unlock_bh(&np->np_thread_lock);
}
- spin_unlock_bh(&np_lock);
return NULL;
}
@@ -346,16 +346,22 @@ struct iscsi_np *iscsit_add_np(
struct sockaddr_in6 *sock_in6;
struct iscsi_np *np;
int ret;
+
+ mutex_lock(&np_lock);
+
/*
* Locate the existing struct iscsi_np if already active..
*/
np = iscsit_get_np(sockaddr, network_transport);
- if (np)
+ if (np) {
+ mutex_unlock(&np_lock);
return np;
+ }
np = kzalloc(sizeof(struct iscsi_np), GFP_KERNEL);
if (!np) {
pr_err("Unable to allocate memory for struct iscsi_np\n");
+ mutex_unlock(&np_lock);
return ERR_PTR(-ENOMEM);
}
@@ -378,6 +384,7 @@ struct iscsi_np *iscsit_add_np(
ret = iscsi_target_setup_login_socket(np, sockaddr);
if (ret != 0) {
kfree(np);
+ mutex_unlock(&np_lock);
return ERR_PTR(ret);
}
@@ -386,6 +393,7 @@ struct iscsi_np *iscsit_add_np(
pr_err("Unable to create kthread: iscsi_np\n");
ret = PTR_ERR(np->np_thread);
kfree(np);
+ mutex_unlock(&np_lock);
return ERR_PTR(ret);
}
/*
@@ -396,10 +404,10 @@ struct iscsi_np *iscsit_add_np(
* point because iscsi_np has not been added to g_np_list yet.
*/
np->np_exports = 1;
+ np->np_thread_state = ISCSI_NP_THREAD_ACTIVE;
- spin_lock_bh(&np_lock);
list_add_tail(&np->np_list, &g_np_list);
- spin_unlock_bh(&np_lock);
+ mutex_unlock(&np_lock);
pr_debug("CORE[0] - Added Network Portal: %s:%hu on %s\n",
np->np_ip, np->np_port, np->np_transport->name);
@@ -469,9 +477,9 @@ int iscsit_del_np(struct iscsi_np *np)
np->np_transport->iscsit_free_np(np);
- spin_lock_bh(&np_lock);
+ mutex_lock(&np_lock);
list_del(&np->np_list);
- spin_unlock_bh(&np_lock);
+ mutex_unlock(&np_lock);
pr_debug("CORE[0] - Removed Network Portal: %s:%hu on %s\n",
np->np_ip, np->np_port, np->np_transport->name);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 78fe9e545ce6d510b979dc2d8e14096a279fc519 upstream.
Some DCE8 boards have a funky BlankCrtc table that results
in a timeout when trying to blank the display. The
timeout is harmless (all operations needed from the table
are complete), but wastes time and is confusing to users so
work around it.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index ed8bc9d..aee7242 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -209,6 +209,16 @@ static void atombios_enable_crtc_memreq(struct drm_crtc *crtc, int state)
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+static const u32 vga_control_regs[6] =
+{
+ AVIVO_D1VGA_CONTROL,
+ AVIVO_D2VGA_CONTROL,
+ EVERGREEN_D3VGA_CONTROL,
+ EVERGREEN_D4VGA_CONTROL,
+ EVERGREEN_D5VGA_CONTROL,
+ EVERGREEN_D6VGA_CONTROL,
+};
+
static void atombios_blank_crtc(struct drm_crtc *crtc, int state)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -216,13 +226,23 @@ static void atombios_blank_crtc(struct drm_crtc *crtc, int state)
struct radeon_device *rdev = dev->dev_private;
int index = GetIndexIntoMasterTable(COMMAND, BlankCRTC);
BLANK_CRTC_PS_ALLOCATION args;
+ u32 vga_control = 0;
memset(&args, 0, sizeof(args));
+ if (ASIC_IS_DCE8(rdev)) {
+ vga_control = RREG32(vga_control_regs[radeon_crtc->crtc_id]);
+ WREG32(vga_control_regs[radeon_crtc->crtc_id], vga_control | 1);
+ }
+
args.ucCRTC = radeon_crtc->crtc_id;
args.ucBlanking = state;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ if (ASIC_IS_DCE8(rdev)) {
+ WREG32(vga_control_regs[radeon_crtc->crtc_id], vga_control);
+ }
}
static void atombios_powergate_crtc(struct drm_crtc *crtc, int state)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Mackerras <[email protected]>
commit 91b973f90c1220d71923e7efe1e61f5329806380 upstream.
The code in remove_cache_dir() is supposed to remove the "cache"
subdirectory from the sysfs directory for a CPU when that CPU is
being offlined. It tries to do this by calling kobject_put() on
the kobject for the subdirectory. However, the subdirectory only
gets removed once the last reference goes away, and the reference
being put here may well not be the last reference. That means
that the "cache" subdirectory may still exist when the offlining
operation has finished. If the same CPU subsequently gets onlined,
the code tries to add a new "cache" subdirectory. If the old
subdirectory has not yet been removed, we get a WARN_ON in the
sysfs code, with stack trace, and an error message printed on the
console. Further, we ultimately end up with an online cpu with no
"cache" subdirectory.
This fixes it by doing an explicit kobject_del() at the point where
we want the subdirectory to go away. kobject_del() removes the sysfs
directory even though the object still exists in memory. The object
will get freed at some point in the future. A subsequent onlining
operation can create a new sysfs directory, even if the old object
still exists in memory, without causing any problems.
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/powerpc/kernel/cacheinfo.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index 9262cf2..2eab23c 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -794,6 +794,9 @@ static void remove_cache_dir(struct cache_dir *cache_dir)
{
remove_index_dirs(cache_dir);
+ /* Remove cache dir from sysfs */
+ kobject_del(cache_dir->kobj);
+
kobject_put(cache_dir->kobj);
kfree(cache_dir);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 6802d4bad83f50081b2788698570218aaff8d10e upstream.
The BlankCrtc table in some DCE8 boards has some
logic shortcuts for the vbios when this bit is set.
Clear it for driver use.
v2: fix typo
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 2ab4b35..811d101 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -3781,6 +3781,10 @@ void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
/* tell the bios not to handle mode switching */
bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH;
+ /* clear the vbios dpms state */
+ if (ASIC_IS_DCE4(rdev))
+ bios_2_scratch &= ~ATOM_S2_DEVICE_DPMS_STATE;
+
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mel Gorman <[email protected]>
commit c297663c0b3930491a3cb2aba4b6e5a7159c3503 upstream.
The command line parsing takes place before jump labels are initialised
which generates a warning if numa_balancing= is specified and
CONFIG_JUMP_LABEL is set.
On older kernels before commit c4b2c0c5f647 ("static_key: WARN on usage
before jump_label_init was called") the kernel would have crashed. This
patch enables automatic numa balancing later in the initialisation
process if numa_balancing= is specified.
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/mempolicy.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 4baf12e..bfa95cf 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2524,7 +2524,7 @@ void mpol_free_shared_policy(struct shared_policy *p)
}
#ifdef CONFIG_NUMA_BALANCING
-static bool __initdata numabalancing_override;
+static int __initdata numabalancing_override;
static void __init check_numabalancing_enable(void)
{
@@ -2533,9 +2533,15 @@ static void __init check_numabalancing_enable(void)
if (IS_ENABLED(CONFIG_NUMA_BALANCING_DEFAULT_ENABLED))
numabalancing_default = true;
+ /* Parsed by setup_numabalancing. override == 1 enables, -1 disables */
+ if (numabalancing_override)
+ set_numabalancing_state(numabalancing_override == 1);
+
if (nr_node_ids > 1 && !numabalancing_override) {
- printk(KERN_INFO "Enabling automatic NUMA balancing. "
- "Configure with numa_balancing= or sysctl");
+ printk(KERN_INFO "%s automatic NUMA balancing. "
+ "Configure with numa_balancing= or the "
+ "kernel.numa_balancing sysctl",
+ numabalancing_default ? "Enabling" : "Disabling");
set_numabalancing_state(numabalancing_default);
}
}
@@ -2545,13 +2551,12 @@ static int __init setup_numabalancing(char *str)
int ret = 0;
if (!str)
goto out;
- numabalancing_override = true;
if (!strcmp(str, "enable")) {
- set_numabalancing_state(true);
+ numabalancing_override = 1;
ret = 1;
} else if (!strcmp(str, "disable")) {
- set_numabalancing_state(false);
+ numabalancing_override = -1;
ret = 1;
}
out:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Weiner <[email protected]>
commit a804552b9a15c931cfc2a92a2e0aed1add8b580a upstream.
Tejun reported stuttering and latency spikes on a system where random
tasks would enter direct reclaim and get stuck on dirty pages. Around
50% of memory was occupied by tmpfs backed by an SSD, and another disk
(rotating) was reading and writing at max speed to shrink a partition.
: The problem was pretty ridiculous. It's a 8gig machine w/ one ssd and 10k
: rpm harddrive and I could reliably reproduce constant stuttering every
: several seconds for as long as buffered IO was going on on the hard drive
: either with tmpfs occupying somewhere above 4gig or a test program which
: allocates about the same amount of anon memory. Although swap usage was
: zero, turning off swap also made the problem go away too.
:
: The trigger conditions seem quite plausible - high anon memory usage w/
: heavy buffered IO and swap configured - and it's highly likely that this
: is happening in the wild too. (this can happen with copying large files
: to usb sticks too, right?)
This patch (of 2):
The dirty_balance_reserve is an approximation of the fraction of free
pages that the page allocator does not make available for page cache
allocations. As a result, it has to be taken into account when
calculating the amount of "dirtyable memory", the baseline to which
dirty_background_ratio and dirty_ratio are applied.
However, currently the reserve is subtracted from the sum of free and
reclaimable pages, which is non-sensical and leads to erroneous results
when the system is dominated by unreclaimable pages and the
dirty_balance_reserve is bigger than free+reclaimable. In that case, at
least the already allocated cache should be considered dirtyable.
Fix the calculation by subtracting the reserve from the amount of free
pages, then adding the reclaimable pages on top.
[[email protected]: fix CONFIG_HIGHMEM build]
Signed-off-by: Johannes Weiner <[email protected]>
Reported-by: Tejun Heo <[email protected]>
Tested-by: Tejun Heo <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Wu Fengguang <[email protected]>
Reviewed-by: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
mm/page-writeback.c | 55 +++++++++++++++++++++++------------------------------
1 file changed, 24 insertions(+), 31 deletions(-)
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 241a746..1c21100 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -188,6 +188,25 @@ static unsigned long writeout_period_time = 0;
* global dirtyable memory first.
*/
+/**
+ * zone_dirtyable_memory - number of dirtyable pages in a zone
+ * @zone: the zone
+ *
+ * Returns the zone's number of pages potentially available for dirty
+ * page cache. This is the base value for the per-zone dirty limits.
+ */
+static unsigned long zone_dirtyable_memory(struct zone *zone)
+{
+ unsigned long nr_pages;
+
+ nr_pages = zone_page_state(zone, NR_FREE_PAGES);
+ nr_pages -= min(nr_pages, zone->dirty_balance_reserve);
+
+ nr_pages += zone_reclaimable_pages(zone);
+
+ return nr_pages;
+}
+
static unsigned long highmem_dirtyable_memory(unsigned long total)
{
#ifdef CONFIG_HIGHMEM
@@ -195,11 +214,9 @@ static unsigned long highmem_dirtyable_memory(unsigned long total)
unsigned long x = 0;
for_each_node_state(node, N_HIGH_MEMORY) {
- struct zone *z =
- &NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
+ struct zone *z = &NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
- x += zone_page_state(z, NR_FREE_PAGES) +
- zone_reclaimable_pages(z) - z->dirty_balance_reserve;
+ x += zone_dirtyable_memory(z);
}
/*
* Unreclaimable memory (kernel memory or anonymous memory
@@ -235,9 +252,11 @@ static unsigned long global_dirtyable_memory(void)
{
unsigned long x;
- x = global_page_state(NR_FREE_PAGES) + global_reclaimable_pages();
+ x = global_page_state(NR_FREE_PAGES);
x -= min(x, dirty_balance_reserve);
+ x += global_reclaimable_pages();
+
if (!vm_highmem_is_dirtyable)
x -= highmem_dirtyable_memory(x);
@@ -289,32 +308,6 @@ void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
}
/**
- * zone_dirtyable_memory - number of dirtyable pages in a zone
- * @zone: the zone
- *
- * Returns the zone's number of pages potentially available for dirty
- * page cache. This is the base value for the per-zone dirty limits.
- */
-static unsigned long zone_dirtyable_memory(struct zone *zone)
-{
- /*
- * The effective global number of dirtyable pages may exclude
- * highmem as a big-picture measure to keep the ratio between
- * dirty memory and lowmem reasonable.
- *
- * But this function is purely about the individual zone and a
- * highmem zone can hold its share of dirty pages, so we don't
- * care about vm_highmem_is_dirtyable here.
- */
- unsigned long nr_pages = zone_page_state(zone, NR_FREE_PAGES) +
- zone_reclaimable_pages(zone);
-
- /* don't allow this to underflow */
- nr_pages -= min(nr_pages, zone->dirty_balance_reserve);
- return nr_pages;
-}
-
-/**
* zone_dirty_limit - maximum number of dirty pages allowed in a zone
* @zone: the zone
*
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Eric W. Biederman" <[email protected]>
commit 260a459d2e39761fbd39803497205ce1690bc7b1 upstream.
A bug was introduced with the is_mounted helper function in
commit f7a99c5b7c8bd3d3f533c8b38274e33f3da9096e
Author: Al Viro <[email protected]>
Date: Sat Jun 9 00:59:08 2012 -0400
get rid of ->mnt_longterm
it's enough to set ->mnt_ns of internal vfsmounts to something
distinct from all struct mnt_namespace out there; then we can
just use the check for ->mnt_ns != NULL in the fast path of
mntput_no_expire()
Signed-off-by: Al Viro <[email protected]>
The intent was to test if the real_mount(vfsmount)->mnt_ns was
NULL_OR_ERR but the code is actually testing real_mount(vfsmount)
and always returning true.
The result is d_absolute_path returning paths it should be hiding.
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/mount.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/mount.h b/fs/mount.h
index 64a8581..68d80bd 100644
--- a/fs/mount.h
+++ b/fs/mount.h
@@ -73,7 +73,7 @@ static inline int mnt_has_parent(struct mount *mnt)
static inline int is_mounted(struct vfsmount *mnt)
{
/* neither detached nor internal? */
- return !IS_ERR_OR_NULL(real_mount(mnt));
+ return !IS_ERR_OR_NULL(real_mount(mnt)->mnt_ns);
}
extern struct mount *__lookup_mnt(struct vfsmount *, struct dentry *, int);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <[email protected]>
commit f4b4718b61d1d5a7442a4fd6863ea80c3a10e508 upstream.
these 3 were checking in_interrupt but we have situations where
calling vunmap under this could cause a BUG to be hit in
smp_call_function_many. Use the drm_can_sleep macro instead,
which should stop this path from been taken in this case.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/ast/ast_fb.c | 2 +-
drivers/gpu/drm/cirrus/cirrus_fbdev.c | 2 +-
drivers/gpu/drm/mgag200/mgag200_fb.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_fb.c b/drivers/gpu/drm/ast/ast_fb.c
index 7b33e14..3f65dd6 100644
--- a/drivers/gpu/drm/ast/ast_fb.c
+++ b/drivers/gpu/drm/ast/ast_fb.c
@@ -65,7 +65,7 @@ static void ast_dirty_update(struct ast_fbdev *afbdev,
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!in_interrupt())
+ if (!drm_can_sleep())
ret = ast_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
diff --git a/drivers/gpu/drm/cirrus/cirrus_fbdev.c b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
index b27e956..6c16de3 100644
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -39,7 +39,7 @@ static void cirrus_dirty_update(struct cirrus_fbdev *afbdev,
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!in_interrupt())
+ if (!drm_can_sleep())
ret = cirrus_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
diff --git a/drivers/gpu/drm/mgag200/mgag200_fb.c b/drivers/gpu/drm/mgag200/mgag200_fb.c
index 964f58c..17cea9f 100644
--- a/drivers/gpu/drm/mgag200/mgag200_fb.c
+++ b/drivers/gpu/drm/mgag200/mgag200_fb.c
@@ -41,7 +41,7 @@ static void mga_dirty_update(struct mga_fbdev *mfbdev,
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!in_interrupt())
+ if (!drm_can_sleep())
ret = mgag200_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown <[email protected]>
commit 49a12877d2777cadcb838981c3c4f5a424aef310 upstream.
There is currently no facility in ACPI to express the hookup of voltage
regulators, the expectation is that the regulators that exist in the
system will be handled transparently by firmware if they need software
control at all. This means that if for some reason the regulator API is
enabled on such a system it should assume that any supplies that devices
need are provided by the system at all relevant times without any software
intervention.
Tell the regulator core to make this assumption by calling
regulator_has_full_constraints(). Do this as soon as we know we are using
ACPI so that the information is available to the regulator core as early
as possible. This will cause the regulator core to pretend that there is
an always on regulator supplying any supply that is requested but that has
not otherwise been mapped which is the behaviour expected on a system with
ACPI.
Should the ability to specify regulators be added in future revisions of
ACPI then once we have support for ACPI mappings in the kernel the same
assumptions will apply. It is also likely that systems will default to a
mode of operation which does not require any interpretation of these
mappings in order to be compatible with existing operating system releases
so it should remain safe to make these assumptions even if the mappings
exist but are not supported by the kernel.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/acpi/bus.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index a5bb33b..80d8a23 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -33,6 +33,7 @@
#include <linux/proc_fs.h>
#include <linux/acpi.h>
#include <linux/slab.h>
+#include <linux/regulator/machine.h>
#ifdef CONFIG_X86
#include <asm/mpspec.h>
#endif
@@ -704,6 +705,14 @@ void __init acpi_early_init(void)
goto error0;
}
+ /*
+ * If the system is using ACPI then we can be reasonably
+ * confident that any regulators are managed by the firmware
+ * so tell the regulator core it has everything it needs to
+ * know.
+ */
+ regulator_has_full_constraints();
+
return;
error0:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Shilong <[email protected]>
commit 90515e7f5d7d24cbb2a4038a3f1b5cfa2921aa17 upstream.
We may return early in btrfs_drop_snapshot(), we shouldn't
call btrfs_std_err() for this case, fix it.
Signed-off-by: Wang Shilong <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
fs/btrfs/extent-tree.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 3ae253e..79af8be 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -7661,7 +7661,7 @@ out:
*/
if (root_dropped == false)
btrfs_add_dead_root(root);
- if (err)
+ if (err && err != -EAGAIN)
btrfs_std_error(root->fs_info, err);
return err;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Akash Goel <[email protected]>
commit ec14ba47791965d2c08e0a681ff44eacbf3c4553 upstream.
The 'offset' field of the 'scatterlist' structure was wrongly
programmed with the offset value from the base of stolen area,
whereas this field indicates the offset from where the interested
data starts within the first PAGE pointed to by 'scattterlist'
structure. As a result when a new GEM object allocated from stolen
area is mapped to GTT, it could lead to an overwrite of GTT entries
as the page count calculation will go wrong, refer the function
'sg_page_count'.
v2: Modified the commit message. (Chris)
Signed-off-by: Akash Goel <[email protected]>
Reviewed-by: Jesse Barnes <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/i915_gem_stolen.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index 982d473..4047e3b 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -234,7 +234,7 @@ i915_pages_create_for_stolen(struct drm_device *dev,
}
sg = st->sgl;
- sg->offset = offset;
+ sg->offset = 0;
sg->length = size;
sg_dma_address(sg) = (dma_addr_t)dev_priv->mm.stolen_base + offset;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: David Sterba <[email protected]>
commit d024206133ce21936b3d5780359afc00247655b7 upstream.
Currently, any user can snapshot any subvolume if the path is accessible and
thus indirectly create and keep files he does not own under his direcotries.
This is not possible with traditional directories.
In security context, a user can snapshot root filesystem and pin any
potentially buggy binaries, even if the updates are applied.
All the snapshots are visible to the administrator, so it's possible to
verify if there are suspicious snapshots.
Another more practical problem is that any user can pin the space used
by eg. root and cause ENOSPC.
Original report:
https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/484786
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
fs/btrfs/ioctl.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 6074a8e..6752118 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -1534,6 +1534,12 @@ static noinline int btrfs_ioctl_snap_create_transid(struct file *file,
printk(KERN_INFO "btrfs: Snapshot src from "
"another FS\n");
ret = -EINVAL;
+ } else if (!inode_owner_or_capable(src_inode)) {
+ /*
+ * Subvolume creation is not restricted, but snapshots
+ * are limited to own subvolumes only
+ */
+ ret = -EPERM;
} else {
ret = btrfs_mksubvol(&file->f_path, name, namelen,
BTRFS_I(src_inode)->root,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Adrien=20Verg=C3=A9?= <[email protected]>
commit e7729a415315fcd9516912050d85d5aaebcededc upstream.
Similarly to other Apple products, MBA 1,1 needs a specific quirk.
Pin 0x18 must be set to VREF_50 to have sound output. This was no
longer done since commit 1a97b7f, resulting in a mute built-in speaker.
This patch corrects the regression by creating a fixup for the MBA 1,1.
Fixes: 1a97b7f22774 ("ALSA: hda/realtek - Remove the last static quirks for ALC882")
Tested-by: Adrien Vergé <[email protected]>
Signed-off-by: Adrien Vergé <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/patch_realtek.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e0bafd8..cd4cbad 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1767,6 +1767,7 @@ enum {
ALC889_FIXUP_DAC_ROUTE,
ALC889_FIXUP_MBP_VREF,
ALC889_FIXUP_IMAC91_VREF,
+ ALC889_FIXUP_MBA11_VREF,
ALC889_FIXUP_MBA21_VREF,
ALC882_FIXUP_INV_DMIC,
ALC882_FIXUP_NO_PRIMARY_HP,
@@ -1896,6 +1897,16 @@ static void alc889_fixup_imac91_vref(struct hda_codec *codec,
alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
}
+/* Set VREF on speaker pins on mba11 */
+static void alc889_fixup_mba11_vref(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static hda_nid_t nids[1] = { 0x18 };
+
+ if (action == HDA_FIXUP_ACT_INIT)
+ alc889_fixup_mac_pins(codec, nids, ARRAY_SIZE(nids));
+}
+
/* Set VREF on speaker pins on mba21 */
static void alc889_fixup_mba21_vref(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
@@ -2100,6 +2111,12 @@ static const struct hda_fixup alc882_fixups[] = {
.chained = true,
.chain_id = ALC882_FIXUP_GPIO1,
},
+ [ALC889_FIXUP_MBA11_VREF] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc889_fixup_mba11_vref,
+ .chained = true,
+ .chain_id = ALC889_FIXUP_MBP_VREF,
+ },
[ALC889_FIXUP_MBA21_VREF] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc889_fixup_mba21_vref,
@@ -2169,7 +2186,7 @@ static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3200, "iMac 7,1 Aluminum", ALC882_FIXUP_EAPD),
- SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC889_FIXUP_MBP_VREF),
+ SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC889_FIXUP_MBA11_VREF),
SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC889_FIXUP_MBA21_VREF),
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF),
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <[email protected]>
commit 22accca01713b13dac386ca90b787aadf88f6551 upstream.
Not removing pm qos request and free memory for it can cause crash,
when some other driver use pm qos. For example, this oops:
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0
Call Trace:
[<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0
[<ffffffff810ad071>] pm_qos_add_request+0x91/0x100
[<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e]
was caused by earlier i915 probe failure:
[drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000
[drm:i915_driver_load] *ERROR* failed to init modeset
i915: probe of 0000:00:02.0 failed with error -5
Bug report:
http://bugzilla.redhat.com/show_bug.cgi?id=1057533
Reported-by: Giandomenico De Tullio <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
[danvet: Drop unnecessary code movement.]
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/i915_dma.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0c956e9..58c3db8 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1675,6 +1675,7 @@ out_gem_unload:
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
+ pm_qos_remove_request(&dev_priv->pm_qos);
destroy_workqueue(dev_priv->wq);
out_mtrrfree:
arch_phys_wc_del(dev_priv->mm.gtt_mtrr);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mihai Caraman <[email protected]>
commit 70713fe315ed14cd1bb07d1a7f33e973d136ae3d upstream.
Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss().
Signed-off-by: Mihai Caraman <[email protected]>
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/powerpc/kvm/e500_mmu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/e500_mmu.c b/arch/powerpc/kvm/e500_mmu.c
index 6d6f153..c17600d 100644
--- a/arch/powerpc/kvm/e500_mmu.c
+++ b/arch/powerpc/kvm/e500_mmu.c
@@ -127,7 +127,7 @@ static int kvmppc_e500_tlb_index(struct kvmppc_vcpu_e500 *vcpu_e500,
}
static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
- unsigned int eaddr, int as)
+ gva_t eaddr, int as)
{
struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
unsigned int victim, tsized;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Schwab <[email protected]>
commit 48eaef0518a565d3852e301c860e1af6a6db5a84 upstream.
Signed-off-by: Andreas Schwab <[email protected]>
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/powerpc/kvm/book3s_hv.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 7629cd3..5648808 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -82,10 +82,13 @@ void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
/* CPU points to the first thread of the core */
if (cpu != me && cpu >= 0 && cpu < nr_cpu_ids) {
+#ifdef CONFIG_KVM_XICS
int real_cpu = cpu + vcpu->arch.ptid;
if (paca[real_cpu].kvm_hstate.xics_phys)
xics_wake_cpu(real_cpu);
- else if (cpu_online(cpu))
+ else
+#endif
+ if (cpu_online(cpu))
smp_send_reschedule(cpu);
}
put_cpu();
@@ -1090,7 +1093,9 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu)
smp_wmb();
#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP)
if (vcpu->arch.ptid) {
+#ifdef CONFIG_KVM_XICS
xics_wake_cpu(cpu);
+#endif
++vc->n_woken;
}
#endif
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Naoya Horiguchi <[email protected]>
commit 54b9dd14d09f24927285359a227aa363ce46089e upstream.
After thp split in hwpoison_user_mappings(), we hold page lock on the
raw error page only between try_to_unmap, hence we are in danger of race
condition.
I found in the RHEL7 MCE-relay testing that we have "bad page" error
when a memory error happens on a thp tail page used by qemu-kvm:
Triggering MCE exception on CPU 10
mce: [Hardware Error]: Machine check events logged
MCE exception done on CPU 10
MCE 0x38c535: Killing qemu-kvm:8418 due to hardware memory corruption
MCE 0x38c535: dirty LRU page recovery: Recovered
qemu-kvm[8418]: segfault at 20 ip 00007ffb0f0f229a sp 00007fffd6bc5240 error 4 in qemu-kvm[7ffb0ef14000+420000]
BUG: Bad page state in process qemu-kvm pfn:38c400
page:ffffea000e310000 count:0 mapcount:0 mapping: (null) index:0x7ffae3c00
page flags: 0x2fffff0008001d(locked|referenced|uptodate|dirty|swapbacked)
Modules linked in: hwpoison_inject mce_inject vhost_net macvtap macvlan ...
CPU: 0 PID: 8418 Comm: qemu-kvm Tainted: G M -------------- 3.10.0-54.0.1.el7.mce_test_fixed.x86_64 #1
Hardware name: NEC NEC Express5800/R120b-1 [N8100-1719F]/MS-91E7-001, BIOS 4.6.3C19 02/10/2011
Call Trace:
dump_stack+0x19/0x1b
bad_page.part.59+0xcf/0xe8
free_pages_prepare+0x148/0x160
free_hot_cold_page+0x31/0x140
free_hot_cold_page_list+0x46/0xa0
release_pages+0x1c1/0x200
free_pages_and_swap_cache+0xad/0xd0
tlb_flush_mmu.part.46+0x4c/0x90
tlb_finish_mmu+0x55/0x60
exit_mmap+0xcb/0x170
mmput+0x67/0xf0
vhost_dev_cleanup+0x231/0x260 [vhost_net]
vhost_net_release+0x3f/0x90 [vhost_net]
__fput+0xe9/0x270
____fput+0xe/0x10
task_work_run+0xc4/0xe0
do_exit+0x2bb/0xa40
do_group_exit+0x3f/0xa0
get_signal_to_deliver+0x1d0/0x6e0
do_signal+0x48/0x5e0
do_notify_resume+0x71/0xc0
retint_signal+0x48/0x8c
The reason of this bug is that a page fault happens before unlocking the
head page at the end of memory_failure(). This strange page fault is
trying to access to address 0x20 and I'm not sure why qemu-kvm does
this, but anyway as a result the SIGSEGV makes qemu-kvm exit and on the
way we catch the bad page bug/warning because we try to free a locked
page (which was the former head page.)
To fix this, this patch suggests to shift page lock from head page to
tail page just after thp split. SIGSEGV still happens, but it affects
only error affected VMs, not a whole system.
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Wanpeng Li <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
mm/memory-failure.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index e79f395..bfee485 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -854,14 +854,14 @@ static int page_action(struct page_state *ps, struct page *p,
* the pages and send SIGBUS to the processes if the data was dirty.
*/
static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
- int trapno, int flags)
+ int trapno, int flags, struct page **hpagep)
{
enum ttu_flags ttu = TTU_UNMAP | TTU_IGNORE_MLOCK | TTU_IGNORE_ACCESS;
struct address_space *mapping;
LIST_HEAD(tokill);
int ret;
int kill = 1, forcekill;
- struct page *hpage = compound_head(p);
+ struct page *hpage = *hpagep;
struct page *ppage;
if (PageReserved(p) || PageSlab(p))
@@ -940,11 +940,14 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
* We pinned the head page for hwpoison handling,
* now we split the thp and we are interested in
* the hwpoisoned raw page, so move the refcount
- * to it.
+ * to it. Similarly, page lock is shifted.
*/
if (hpage != p) {
put_page(hpage);
get_page(p);
+ lock_page(p);
+ unlock_page(hpage);
+ *hpagep = p;
}
/* THP is split, so ppage should be the real poisoned page. */
ppage = p;
@@ -962,17 +965,11 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
if (kill)
collect_procs(ppage, &tokill);
- if (hpage != ppage)
- lock_page(ppage);
-
ret = try_to_unmap(ppage, ttu);
if (ret != SWAP_SUCCESS)
printk(KERN_ERR "MCE %#lx: failed to unmap page (mapcount=%d)\n",
pfn, page_mapcount(ppage));
- if (hpage != ppage)
- unlock_page(ppage);
-
/*
* Now that the dirty bit has been propagated to the
* struct page and all unmaps done we can decide if
@@ -1189,8 +1186,12 @@ int memory_failure(unsigned long pfn, int trapno, int flags)
/*
* Now take care of user space mappings.
* Abort on fail: __delete_from_page_cache() assumes unmapped page.
+ *
+ * When the raw error page is thp tail page, hpage points to the raw
+ * page after thp split.
*/
- if (hwpoison_user_mappings(p, pfn, trapno, flags) != SWAP_SUCCESS) {
+ if (hwpoison_user_mappings(p, pfn, trapno, flags, &hpage)
+ != SWAP_SUCCESS) {
printk(KERN_ERR "MCE %#lx: cannot unmap page, give up\n", pfn);
res = -EBUSY;
goto out;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Warren <[email protected]>
commit 75ea799df4cb07e505c91b4abaa87bc28aad3e66 upstream.
The current MAX8907 driver has two issues related to weekday value
handling:
1)
The HW WEEKDAY register has range 0..6 rather than 1..7 as documented.
Note that I validated the actual HW range by observing the HW register
roll from 6->0 rather than 6->7->1 as would otherwise be expected.
This matches Linux's tm_wday range of 0..6.
When the CMOS RAM content is lost, the date returned from the device is
2007-01-01 00:00:00, which is a Monday. The WEEKDAY register reads 1 in
this case. This matches the numbering in Linux's tm_wday field.
Hence we should write Linux's tm_wday value to the register without
modifying it. Hence, remove the +1/-1 calculations for WEEKDAY/tm_wday.
2)
There's no need to make alarms match on the WEEKDAY register, since the
other fields together uniquely define the alarm date/time. Ignoring the
WEEKDAY value in the match isolates the driver from any incorrect value in
the current time copy of the WEEKDAY register.
Each change individually, or both together, solves an issue that I
observed; "hwclock -r" would time out waiting for its alarm to fire if the
CMOS RAM content had been lost, and hence the WEEKDAY register value
mismatched what the driver expected it to be. "hwclock -w" would solve
this by over-writing the HW default WEEKDAY register value with what the
driver expected.
Signed-off-by: Stephen Warren <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/rtc/rtc-max8907.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/rtc-max8907.c b/drivers/rtc/rtc-max8907.c
index 8e45b3c..3032178 100644
--- a/drivers/rtc/rtc-max8907.c
+++ b/drivers/rtc/rtc-max8907.c
@@ -51,7 +51,7 @@ static irqreturn_t max8907_irq_handler(int irq, void *data)
{
struct max8907_rtc *rtc = data;
- regmap_update_bits(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x7f, 0);
+ regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0);
rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
@@ -64,7 +64,7 @@ static void regs_to_tm(u8 *regs, struct rtc_time *tm)
bcd2bin(regs[RTC_YEAR1]) - 1900;
tm->tm_mon = bcd2bin(regs[RTC_MONTH] & 0x1f) - 1;
tm->tm_mday = bcd2bin(regs[RTC_DATE] & 0x3f);
- tm->tm_wday = (regs[RTC_WEEKDAY] & 0x07) - 1;
+ tm->tm_wday = (regs[RTC_WEEKDAY] & 0x07);
if (regs[RTC_HOUR] & HOUR_12) {
tm->tm_hour = bcd2bin(regs[RTC_HOUR] & 0x01f);
if (tm->tm_hour == 12)
@@ -88,7 +88,7 @@ static void tm_to_regs(struct rtc_time *tm, u8 *regs)
regs[RTC_YEAR1] = bin2bcd(low);
regs[RTC_MONTH] = bin2bcd(tm->tm_mon + 1);
regs[RTC_DATE] = bin2bcd(tm->tm_mday);
- regs[RTC_WEEKDAY] = tm->tm_wday + 1;
+ regs[RTC_WEEKDAY] = tm->tm_wday;
regs[RTC_HOUR] = bin2bcd(tm->tm_hour);
regs[RTC_MIN] = bin2bcd(tm->tm_min);
regs[RTC_SEC] = bin2bcd(tm->tm_sec);
@@ -153,7 +153,7 @@ static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
tm_to_regs(&alrm->time, regs);
/* Disable alarm while we update the target time */
- ret = regmap_update_bits(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x7f, 0);
+ ret = regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0);
if (ret < 0)
return ret;
@@ -163,8 +163,7 @@ static int max8907_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return ret;
if (alrm->enabled)
- ret = regmap_update_bits(rtc->regmap, MAX8907_REG_ALARM0_CNTL,
- 0x7f, 0x7f);
+ ret = regmap_write(rtc->regmap, MAX8907_REG_ALARM0_CNTL, 0x77);
return ret;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: ZHAO Gang <[email protected]>
commit 64e5acb09ca6b50c97299cff9ef51299470b29f2 upstream.
Use the right function to update frequency value.
If rx skb is probe response or beacon, the wrong frequency value can
cause problem that bss info can't be updated when it should be.
Fixes: 8318d78a44d4 ("cfg80211 API for channels/bitrates, mac80211
and driver conversion")
Signed-off-by: ZHAO Gang <[email protected]>
Acked-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/b43/xmit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 8cb206a..e85d34b 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -821,10 +821,10 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
* channel number in b43. */
if (chanstat & B43_RX_CHAN_5GHZ) {
status.band = IEEE80211_BAND_5GHZ;
- status.freq = b43_freq_to_channel_5ghz(chanid);
+ status.freq = b43_channel_to_freq_5ghz(chanid);
} else {
status.band = IEEE80211_BAND_2GHZ;
- status.freq = b43_freq_to_channel_2ghz(chanid);
+ status.freq = b43_channel_to_freq_2ghz(chanid);
}
break;
default:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 945be38caa287b177b8c17ffaae7754cab6a658f upstream.
It is possible for chip->fixes to be null. Check before dereferencing it.
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Chris Ball <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mmc/host/sdhci-pci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 33593e7..27ae563 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -1389,7 +1389,8 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
* from runtime suspend. If it is not there, don't allow runtime PM.
* Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
*/
- if (chip->fixes->own_cd_for_runtime_pm && !gpio_is_valid(slot->cd_gpio))
+ if (chip->fixes && chip->fixes->own_cd_for_runtime_pm &&
+ !gpio_is_valid(slot->cd_gpio))
chip->allow_runtime_pm = false;
return slot;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Todd Previte <[email protected]>
commit 232a6ee9af8adb185640f67fcaaa9014a9aa0573 upstream.
Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.
Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
bit defintions
- Replaced a lost trailing brace for the added switch()
Signed-off-by: Todd Previte <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.]
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/i915_reg.h | 10 +++++++---
drivers/gpu/drm/i915/intel_dp.c | 40 ++++++++++++++++++++++++++++------------
2 files changed, 35 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c42d31c..42e89d7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1865,9 +1865,13 @@
* Please check the detailed lore in the commit message for for experimental
* evidence.
*/
-#define PORTD_HOTPLUG_LIVE_STATUS (1 << 29)
-#define PORTC_HOTPLUG_LIVE_STATUS (1 << 28)
-#define PORTB_HOTPLUG_LIVE_STATUS (1 << 27)
+#define PORTD_HOTPLUG_LIVE_STATUS_G4X (1 << 29)
+#define PORTC_HOTPLUG_LIVE_STATUS_G4X (1 << 28)
+#define PORTB_HOTPLUG_LIVE_STATUS_G4X (1 << 27)
+/* VLV DP/HDMI bits again match Bspec */
+#define PORTD_HOTPLUG_LIVE_STATUS_VLV (1 << 27)
+#define PORTC_HOTPLUG_LIVE_STATUS_VLV (1 << 28)
+#define PORTB_HOTPLUG_LIVE_STATUS_VLV (1 << 29)
#define PORTD_HOTPLUG_INT_STATUS (3 << 21)
#define PORTC_HOTPLUG_INT_STATUS (3 << 19)
#define PORTB_HOTPLUG_INT_STATUS (3 << 17)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 96a410e..e7c46aa 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2518,18 +2518,34 @@ g4x_dp_detect(struct intel_dp *intel_dp)
return status;
}
- switch (intel_dig_port->port) {
- case PORT_B:
- bit = PORTB_HOTPLUG_LIVE_STATUS;
- break;
- case PORT_C:
- bit = PORTC_HOTPLUG_LIVE_STATUS;
- break;
- case PORT_D:
- bit = PORTD_HOTPLUG_LIVE_STATUS;
- break;
- default:
- return connector_status_unknown;
+ if (IS_VALLEYVIEW(dev)) {
+ switch (intel_dig_port->port) {
+ case PORT_B:
+ bit = PORTB_HOTPLUG_LIVE_STATUS_VLV;
+ break;
+ case PORT_C:
+ bit = PORTC_HOTPLUG_LIVE_STATUS_VLV;
+ break;
+ case PORT_D:
+ bit = PORTD_HOTPLUG_LIVE_STATUS_VLV;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+ } else {
+ switch (intel_dig_port->port) {
+ case PORT_B:
+ bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
+ break;
+ case PORT_C:
+ bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
+ break;
+ case PORT_D:
+ bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
+ break;
+ default:
+ return connector_status_unknown;
+ }
}
if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Boaz Harrosh <[email protected]>
commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream.
At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.
Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).
Also when reading we do not need to allocate for the parity units
since we jump over them.
Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE
Signed-off-by: Boaz Harrosh <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/exofs/ore.c | 37 +++++++++++++++++++++++++------------
include/scsi/osd_ore.h | 1 +
2 files changed, 26 insertions(+), 12 deletions(-)
diff --git a/fs/exofs/ore.c b/fs/exofs/ore.c
index b744228..85cde3e 100644
--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -103,7 +103,7 @@ int ore_verify_layout(unsigned total_comps, struct ore_layout *layout)
layout->max_io_length =
(BIO_MAX_PAGES_KMALLOC * PAGE_SIZE - layout->stripe_unit) *
- layout->group_width;
+ (layout->group_width - layout->parity);
if (layout->parity) {
unsigned stripe_length =
(layout->group_width - layout->parity) *
@@ -286,7 +286,8 @@ int ore_get_rw_state(struct ore_layout *layout, struct ore_components *oc,
if (length) {
ore_calc_stripe_info(layout, offset, length, &ios->si);
ios->length = ios->si.length;
- ios->nr_pages = (ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
+ ios->nr_pages = ((ios->offset & (PAGE_SIZE - 1)) +
+ ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
if (layout->parity)
_ore_post_alloc_raid_stuff(ios);
}
@@ -536,6 +537,7 @@ void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
u64 H = LmodS - G * T;
u32 N = div_u64(H, U);
+ u32 Nlast;
/* "H - (N * U)" is just "H % U" so it's bound to u32 */
u32 C = (u32)(H - (N * U)) / stripe_unit + G * group_width;
@@ -568,6 +570,10 @@ void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
si->length = T - H;
if (si->length > length)
si->length = length;
+
+ Nlast = div_u64(H + si->length + U - 1, U);
+ si->maxdevUnits = Nlast - N;
+
si->M = M;
}
EXPORT_SYMBOL(ore_calc_stripe_info);
@@ -583,13 +589,16 @@ int _ore_add_stripe_unit(struct ore_io_state *ios, unsigned *cur_pg,
int ret;
if (per_dev->bio == NULL) {
- unsigned pages_in_stripe = ios->layout->group_width *
- (ios->layout->stripe_unit / PAGE_SIZE);
- unsigned nr_pages = ios->nr_pages * ios->layout->group_width /
- (ios->layout->group_width -
- ios->layout->parity);
- unsigned bio_size = (nr_pages + pages_in_stripe) /
- ios->layout->group_width;
+ unsigned bio_size;
+
+ if (!ios->reading) {
+ bio_size = ios->si.maxdevUnits;
+ } else {
+ bio_size = (ios->si.maxdevUnits + 1) *
+ (ios->layout->group_width - ios->layout->parity) /
+ ios->layout->group_width;
+ }
+ bio_size *= (ios->layout->stripe_unit / PAGE_SIZE);
per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size);
if (unlikely(!per_dev->bio)) {
@@ -609,8 +618,12 @@ int _ore_add_stripe_unit(struct ore_io_state *ios, unsigned *cur_pg,
added_len = bio_add_pc_page(q, per_dev->bio, pages[pg],
pglen, pgbase);
if (unlikely(pglen != added_len)) {
- ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=%u\n",
- per_dev->bio->bi_vcnt);
+ /* If bi_vcnt == bi_max then this is a SW BUG */
+ ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=0x%x "
+ "bi_max=0x%x BIO_MAX=0x%x cur_len=0x%x\n",
+ per_dev->bio->bi_vcnt,
+ per_dev->bio->bi_max_vecs,
+ BIO_MAX_PAGES_KMALLOC, cur_len);
ret = -ENOMEM;
goto out;
}
@@ -1098,7 +1111,7 @@ int ore_truncate(struct ore_layout *layout, struct ore_components *oc,
size_attr->attr = g_attr_logical_length;
size_attr->attr.val_ptr = &size_attr->newsize;
- ORE_DBGMSG("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
+ ORE_DBGMSG2("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
_LLU(oc->comps->obj.id), _LLU(obj_size), i);
ret = _truncate_mirrors(ios, i * ios->layout->mirrors_p1,
&size_attr->attr);
diff --git a/include/scsi/osd_ore.h b/include/scsi/osd_ore.h
index a5f9b96..6ca3265 100644
--- a/include/scsi/osd_ore.h
+++ b/include/scsi/osd_ore.h
@@ -102,6 +102,7 @@ struct ore_striping_info {
unsigned unit_off;
unsigned cur_pg;
unsigned cur_comp;
+ unsigned maxdevUnits;
};
struct ore_io_state;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ira Weiny <[email protected]>
commit 6e0ea9e6cbcead7fa8c76e3e3b9de4a50c5131c5 upstream.
The GSI QP type is compatible with and should be allowed to send data
to/from any UD QP. This was found when testing ibacm on the same node
as an SA.
Reviewed-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/infiniband/hw/qib/qib_ud.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index d6c7fe7..3ad651c 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -57,13 +57,20 @@ static void qib_ud_loopback(struct qib_qp *sqp, struct qib_swqe *swqe)
struct qib_sge *sge;
struct ib_wc wc;
u32 length;
+ enum ib_qp_type sqptype, dqptype;
qp = qib_lookup_qpn(ibp, swqe->wr.wr.ud.remote_qpn);
if (!qp) {
ibp->n_pkt_drops++;
return;
}
- if (qp->ibqp.qp_type != sqp->ibqp.qp_type ||
+
+ sqptype = sqp->ibqp.qp_type == IB_QPT_GSI ?
+ IB_QPT_UD : sqp->ibqp.qp_type;
+ dqptype = qp->ibqp.qp_type == IB_QPT_GSI ?
+ IB_QPT_UD : qp->ibqp.qp_type;
+
+ if (dqptype != sqptype ||
!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK)) {
ibp->n_pkt_drops++;
goto drop;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Wanlong Gao <[email protected]>
commit 53a52f17d96c8d47c79a7dafa81426317e89c7c1 upstream.
arch/sh/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs':
arch/sh/kernel/kgdb.c:225:32: error: implicit declaration of function 'task_stack_page' [-Werror=implicit-function-declaration]
arch/sh/kernel/kgdb.c:242:23: error: dereferencing pointer to incomplete type
arch/sh/kernel/kgdb.c:243:22: error: dereferencing pointer to incomplete type
arch/sh/kernel/kgdb.c: In function 'singlestep_trap_handler':
arch/sh/kernel/kgdb.c:310:27: error: 'SIGTRAP' undeclared (first use in this function)
arch/sh/kernel/kgdb.c:310:27: note: each undeclared identifier is reported only once for each function it appears in
This was introduced by commit 16559ae48c76 ("kgdb: remove #include
<linux/serial_8250.h> from kgdb.h").
[[email protected]: reworded and reformatted]
Signed-off-by: Wanlong Gao <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reported-by: Fengguang Wu <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/sh/kernel/kgdb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 38b3139..adad46e 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -13,6 +13,7 @@
#include <linux/kdebug.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <asm/cacheflush.h>
#include <asm/traps.h>
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Williamson <[email protected]>
commit 08336fd218e087cc4fcc458e6b6dcafe8702b098 upstream.
dma_pte_free_level() has an off-by-one error when checking whether a pte
is completely covered by a range. Take for example the case of
attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first
2M superpage.
The level_size() is 0x200 and we test:
static void dma_pte_free_level(...
...
if (!(0 > 0 || 0x1ff < 0 + 0x200)) {
...
}
Clearly the 2nd test is true, which means we fail to take the branch to
clear and free the pagetable entry. As a result, we're leaking
pagetables and failing to install new pages over the range.
This was found with a PCI device assigned to a QEMU guest using vfio-pci
without a VGA device present. The first 1M of guest address space is
mapped with various combinations of 4K pages, but eventually the range
is entirely freed and replaced with a 2M contiguous mapping.
intel-iommu errors out with something like:
ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083)
In this case 5c2b8003 is the pointer to the previous leaf page that was
neither freed nor cleared and 849c00083 is the superpage entry that
we're trying to replace it with.
Signed-off-by: Alex Williamson <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Joerg Roedel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/iommu/intel-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 40203ad..cae5a08 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -917,7 +917,7 @@ static void dma_pte_free_level(struct dmar_domain *domain, int level,
/* If range covers entire pagetable, free it */
if (!(start_pfn > level_pfn ||
- last_pfn < level_pfn + level_size(level))) {
+ last_pfn < level_pfn + level_size(level) - 1)) {
dma_clear_pte(pte);
domain_flush_cache(domain, pte, sizeof(*pte));
free_pgtable_page(level_pte);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilia Mirkin <[email protected]>
commit 90d6db1635d5e225623af2e2e859feb607345287 upstream.
Some firmware images may be large (64K), so using kmalloc memory is
inappropriate for them. Use vmalloc instead, to avoid high-order
allocation failures.
Signed-off-by: Ilia Mirkin <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/nouveau/core/engine/falcon.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/core/engine/falcon.c b/drivers/gpu/drm/nouveau/core/engine/falcon.c
index e03fc8e..5e077e4 100644
--- a/drivers/gpu/drm/nouveau/core/engine/falcon.c
+++ b/drivers/gpu/drm/nouveau/core/engine/falcon.c
@@ -56,6 +56,16 @@ _nouveau_falcon_wr32(struct nouveau_object *object, u64 addr, u32 data)
nv_wr32(falcon, falcon->addr + addr, data);
}
+static void *
+vmemdup(const void *src, size_t len)
+{
+ void *p = vmalloc(len);
+
+ if (p)
+ memcpy(p, src, len);
+ return p;
+}
+
int
_nouveau_falcon_init(struct nouveau_object *object)
{
@@ -111,7 +121,7 @@ _nouveau_falcon_init(struct nouveau_object *object)
ret = request_firmware(&fw, name, &device->pdev->dev);
if (ret == 0) {
- falcon->code.data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+ falcon->code.data = vmemdup(fw->data, fw->size);
falcon->code.size = fw->size;
falcon->data.data = NULL;
falcon->data.size = 0;
@@ -134,7 +144,7 @@ _nouveau_falcon_init(struct nouveau_object *object)
return ret;
}
- falcon->data.data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+ falcon->data.data = vmemdup(fw->data, fw->size);
falcon->data.size = fw->size;
release_firmware(fw);
if (!falcon->data.data)
@@ -149,7 +159,7 @@ _nouveau_falcon_init(struct nouveau_object *object)
return ret;
}
- falcon->code.data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+ falcon->code.data = vmemdup(fw->data, fw->size);
falcon->code.size = fw->size;
release_firmware(fw);
if (!falcon->code.data)
@@ -235,8 +245,8 @@ _nouveau_falcon_fini(struct nouveau_object *object, bool suspend)
if (!suspend) {
nouveau_gpuobj_ref(NULL, &falcon->core);
if (falcon->external) {
- kfree(falcon->data.data);
- kfree(falcon->code.data);
+ vfree(falcon->data.data);
+ vfree(falcon->code.data);
falcon->code.data = NULL;
}
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Maarten Lankhorst <[email protected]>
commit ce8f7699f2b6ffe4aa8368b8d9d370875accaa5f upstream.
Commit de7b7d59d54852c introduced tiled GART, but a linear copy is
still performed. This may result in errors on eviction, fix it by
checking tiling from memtype.
Signed-off-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_bo.c | 33 ++++++++-------------------------
1 file changed, 8 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index af20fba..2821c14 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -802,25 +802,25 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
struct ttm_mem_reg *old_mem, struct ttm_mem_reg *new_mem)
{
struct nouveau_mem *node = old_mem->mm_node;
- struct nouveau_bo *nvbo = nouveau_bo(bo);
u64 length = (new_mem->num_pages << PAGE_SHIFT);
u64 src_offset = node->vma[0].offset;
u64 dst_offset = node->vma[1].offset;
+ int src_tiled = !!node->memtype;
+ int dst_tiled = !!((struct nouveau_mem *)new_mem->mm_node)->memtype;
int ret;
while (length) {
u32 amount, stride, height;
+ ret = RING_SPACE(chan, 18 + 6 * (src_tiled + dst_tiled));
+ if (ret)
+ return ret;
+
amount = min(length, (u64)(4 * 1024 * 1024));
stride = 16 * 4;
height = amount / stride;
- if (old_mem->mem_type == TTM_PL_VRAM &&
- nouveau_bo_tile_layout(nvbo)) {
- ret = RING_SPACE(chan, 8);
- if (ret)
- return ret;
-
+ if (src_tiled) {
BEGIN_NV04(chan, NvSubCopy, 0x0200, 7);
OUT_RING (chan, 0);
OUT_RING (chan, 0);
@@ -830,19 +830,10 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
OUT_RING (chan, 0);
OUT_RING (chan, 0);
} else {
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
-
BEGIN_NV04(chan, NvSubCopy, 0x0200, 1);
OUT_RING (chan, 1);
}
- if (new_mem->mem_type == TTM_PL_VRAM &&
- nouveau_bo_tile_layout(nvbo)) {
- ret = RING_SPACE(chan, 8);
- if (ret)
- return ret;
-
+ if (dst_tiled) {
BEGIN_NV04(chan, NvSubCopy, 0x021c, 7);
OUT_RING (chan, 0);
OUT_RING (chan, 0);
@@ -852,18 +843,10 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
OUT_RING (chan, 0);
OUT_RING (chan, 0);
} else {
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
-
BEGIN_NV04(chan, NvSubCopy, 0x021c, 1);
OUT_RING (chan, 1);
}
- ret = RING_SPACE(chan, 14);
- if (ret)
- return ret;
-
BEGIN_NV04(chan, NvSubCopy, 0x0238, 2);
OUT_RING (chan, upper_32_bits(src_offset));
OUT_RING (chan, upper_32_bits(dst_offset));
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit 4e078146dff728f4865270a47710d57797e81eb6 upstream.
With b8668fd0a7e1b59f "s390/uapi: change struct statfs[64] member types
to unsigned values" the size of a couple of struct statfs64 member got
incorrectly changed from 64 to 32 bit for 32 bit builds.
Fix this by changing the type of couple of struct statfs64 members from
unsigned long to unsigned long long.
The definition of struct compat_statfs64 was correct however.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/include/uapi/asm/statfs.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/s390/include/uapi/asm/statfs.h b/arch/s390/include/uapi/asm/statfs.h
index a61d538..471eb09 100644
--- a/arch/s390/include/uapi/asm/statfs.h
+++ b/arch/s390/include/uapi/asm/statfs.h
@@ -35,11 +35,11 @@ struct statfs {
struct statfs64 {
unsigned int f_type;
unsigned int f_bsize;
- unsigned long f_blocks;
- unsigned long f_bfree;
- unsigned long f_bavail;
- unsigned long f_files;
- unsigned long f_ffree;
+ unsigned long long f_blocks;
+ unsigned long long f_bfree;
+ unsigned long long f_bavail;
+ unsigned long long f_files;
+ unsigned long long f_ffree;
__kernel_fsid_t f_fsid;
unsigned int f_namelen;
unsigned int f_frsize;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Boaz Harrosh <[email protected]>
commit ed7e5423014ad89720fcf315c0b73f2c5d0c7bd2 upstream.
An NFS4ERR_RECALLCONFLICT is returned by server from a GET_LAYOUT
only when a Server Sent a RECALL do to that GET_LAYOUT, or
the RECALL and GET_LAYOUT crossed on the wire.
In any way this means we want to wait at most until in-flight IO
is finished and the RECALL can be satisfied.
So a proper wait here is more like 1/10 of a second, not 15 seconds
like we have now. In case of a server bug we delay exponentially
longer on each retry.
Current code totally craps out performance of very large files on
most pnfs-objects layouts, because of how the map changes when the
file has grown into the next raid group.
[Stable: This will patch back to 3.9. If there are earlier still
maintained trees, please tell me I'll send a patch]
Signed-off-by: Boaz Harrosh <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/nfs4proc.c | 34 ++++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index bdaa5a1..64dd7c6 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6651,9 +6651,9 @@ static void nfs4_layoutget_done(struct rpc_task *task, void *calldata)
struct nfs_server *server = NFS_SERVER(inode);
struct pnfs_layout_hdr *lo;
struct nfs4_state *state = NULL;
- unsigned long timeo, giveup;
+ unsigned long timeo, now, giveup;
- dprintk("--> %s\n", __func__);
+ dprintk("--> %s tk_status => %d\n", __func__, -task->tk_status);
if (!nfs41_sequence_done(task, &lgp->res.seq_res))
goto out;
@@ -6661,12 +6661,38 @@ static void nfs4_layoutget_done(struct rpc_task *task, void *calldata)
switch (task->tk_status) {
case 0:
goto out;
+ /*
+ * NFS4ERR_LAYOUTTRYLATER is a conflict with another client
+ * (or clients) writing to the same RAID stripe
+ */
case -NFS4ERR_LAYOUTTRYLATER:
+ /*
+ * NFS4ERR_RECALLCONFLICT is when conflict with self (must recall
+ * existing layout before getting a new one).
+ */
case -NFS4ERR_RECALLCONFLICT:
timeo = rpc_get_timeout(task->tk_client);
giveup = lgp->args.timestamp + timeo;
- if (time_after(giveup, jiffies))
- task->tk_status = -NFS4ERR_DELAY;
+ now = jiffies;
+ if (time_after(giveup, now)) {
+ unsigned long delay;
+
+ /* Delay for:
+ * - Not less then NFS4_POLL_RETRY_MIN.
+ * - One last time a jiffie before we give up
+ * - exponential backoff (time_now minus start_attempt)
+ */
+ delay = max_t(unsigned long, NFS4_POLL_RETRY_MIN,
+ min((giveup - now - 1),
+ now - lgp->args.timestamp));
+
+ dprintk("%s: NFS4ERR_RECALLCONFLICT waiting %lu\n",
+ __func__, delay);
+ rpc_delay(task, delay);
+ task->tk_status = 0;
+ rpc_restart_call_prepare(task);
+ goto out; /* Do not call nfs4_async_handle_error() */
+ }
break;
case -NFS4ERR_EXPIRED:
case -NFS4ERR_BAD_STATEID:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 2510538fa000dd13a3e57b79bf073ffb1748976c upstream.
When the mode is set with 16bpp on QEMU, the output gets totally broken.
The culprit is the bogus register values set for 16bpp, which was likely
copied from from a wrong place.
Addresses https://bugzilla.novell.com/show_bug.cgi?id=799216
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Jiri Slaby <[email protected]>
Cc: David Airlie <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/cirrus/cirrus_mode.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c
index 60685b2..379a47e 100644
--- a/drivers/gpu/drm/cirrus/cirrus_mode.c
+++ b/drivers/gpu/drm/cirrus/cirrus_mode.c
@@ -273,8 +273,8 @@ static int cirrus_crtc_mode_set(struct drm_crtc *crtc,
sr07 |= 0x11;
break;
case 16:
- sr07 |= 0xc1;
- hdr = 0xc0;
+ sr07 |= 0x17;
+ hdr = 0xc1;
break;
case 24:
sr07 |= 0x15;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Charles Keepax <[email protected]>
commit 34354792432b6e0a3b156819a1a19716c50d3473 upstream.
Latest evaluation of the the device has given some patch file additions
for improved performance.
Signed-off-by: Charles Keepax <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/soc/codecs/wm5110.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index c923776..782db4e 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -43,6 +43,54 @@ static const struct reg_default wm5110_sysclk_revd_patch[] = {
{ 0x3133, 0x1201 },
{ 0x3183, 0x1501 },
{ 0x31D3, 0x1401 },
+ { 0x0049, 0x01ea },
+ { 0x004a, 0x01f2 },
+ { 0x0057, 0x01e7 },
+ { 0x0058, 0x01fb },
+ { 0x33ce, 0xc4f5 },
+ { 0x33cf, 0x1361 },
+ { 0x33d0, 0x0402 },
+ { 0x33d1, 0x4700 },
+ { 0x33d2, 0x026d },
+ { 0x33d3, 0xff00 },
+ { 0x33d4, 0x026d },
+ { 0x33d5, 0x0101 },
+ { 0x33d6, 0xc4f5 },
+ { 0x33d7, 0x0361 },
+ { 0x33d8, 0x0402 },
+ { 0x33d9, 0x6701 },
+ { 0x33da, 0xc4f5 },
+ { 0x33db, 0x136f },
+ { 0x33dc, 0xc4f5 },
+ { 0x33dd, 0x134f },
+ { 0x33de, 0xc4f5 },
+ { 0x33df, 0x131f },
+ { 0x33e0, 0x026d },
+ { 0x33e1, 0x4f01 },
+ { 0x33e2, 0x026d },
+ { 0x33e3, 0xf100 },
+ { 0x33e4, 0x026d },
+ { 0x33e5, 0x0001 },
+ { 0x33e6, 0xc4f5 },
+ { 0x33e7, 0x0361 },
+ { 0x33e8, 0x0402 },
+ { 0x33e9, 0x6601 },
+ { 0x33ea, 0xc4f5 },
+ { 0x33eb, 0x136f },
+ { 0x33ec, 0xc4f5 },
+ { 0x33ed, 0x134f },
+ { 0x33ee, 0xc4f5 },
+ { 0x33ef, 0x131f },
+ { 0x33f0, 0x026d },
+ { 0x33f1, 0x4e01 },
+ { 0x33f2, 0x026d },
+ { 0x33f3, 0xf000 },
+ { 0x33f6, 0xc4f5 },
+ { 0x33f7, 0x1361 },
+ { 0x33f8, 0x0402 },
+ { 0x33f9, 0x4600 },
+ { 0x33fa, 0x026d },
+ { 0x33fb, 0xfe00 },
};
static int wm5110_sysclk_ev(struct snd_soc_dapm_widget *w,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit 77a0122e0838663795651aa0beb2325156f98c09 upstream.
A host controller for a SD card may need a GPIO for card detect in order
to wake up from runtime suspend when a card is inserted. If that GPIO is
not configured, then the host controller will not wake up. Fix that for
the affected devices by not enabling runtime PM unless the GPIO is
successfully set up.
This affects BYT sd card host controller which had runtime PM enabled from
v3.11. For completeness, the MFD sd card host controller is flagged also.
The original patch before rebasing (see link below) was tested on v3.11.10
and v3.12.4 although the patch applied with some offsets and fuzz. The
original patch is here:
http://marc.info/?l=linux-mmc&m=138676702327057
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Chris Ball <[email protected]>
[ luis: backported to 3.11:
- struct sdhci_pci_fixes is defined in sdhci-pci.c, not in sdhci-pci.h ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mmc/host/sdhci-pci.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index d7d6bc8..33593e7 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -59,6 +59,7 @@ struct sdhci_pci_fixes {
unsigned int quirks;
unsigned int quirks2;
bool allow_runtime_pm;
+ bool own_cd_for_runtime_pm;
int (*probe) (struct sdhci_pci_chip *);
@@ -290,6 +291,7 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.allow_runtime_pm = true,
+ .own_cd_for_runtime_pm = true,
};
static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
@@ -354,6 +356,7 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
.allow_runtime_pm = true,
+ .own_cd_for_runtime_pm = true,
};
/* O2Micro extra registers */
@@ -1381,6 +1384,14 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
sdhci_pci_add_own_cd(slot);
+ /*
+ * Check if the chip needs a separate GPIO for card detect to wake up
+ * from runtime suspend. If it is not there, don't allow runtime PM.
+ * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
+ */
+ if (chip->fixes->own_cd_for_runtime_pm && !gpio_is_valid(slot->cd_gpio))
+ chip->allow_runtime_pm = false;
+
return slot;
remove:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit b0ad4ff35d479a46a3b995a299db9aeb097acfce upstream.
The DriveGuard chips on the new HP laptops are with a new PnP ID
"HPQ6007". It should be compatible with older chips.
Acked-by: Éric Piel <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Matthew Garrett <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/platform/x86/hp_accel.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index a8e43cf..0ed96df 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -77,6 +77,7 @@ static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
static struct acpi_device_id lis3lv02d_device_ids[] = {
{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
{"HPQ6000", 0}, /* HP Mobile Data Protection System PNP */
+ {"HPQ6007", 0}, /* HP Mobile Data Protection System PNP */
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Weston Andros Adamson <[email protected]>
commit abad2fa5ba67725a3f9c376c8cfe76fbe94a3041 upstream.
If clp is new (cl_count = 1) and it matches another client in
nfs4_discover_server_trunking, the nfs_put_client will free clp before
->cl_preserve_clid is set.
Signed-off-by: Weston Andros Adamson <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/nfs4client.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 3ae4d8c..069cc11 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -245,13 +245,11 @@ struct nfs_client *nfs4_init_client(struct nfs_client *clp,
error = nfs4_discover_server_trunking(clp, &old);
if (error < 0)
goto error;
- nfs_put_client(clp);
- if (clp != old) {
- clp->cl_preserve_clid = true;
- clp = old;
- }
- return clp;
+ if (clp != old)
+ clp->cl_preserve_clid = true;
+ nfs_put_client(clp);
+ return old;
error:
nfs_mark_client_ready(clp, error);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 74142ffc0b52cfe6f9d2f6f34a5f3eedbfe3ce51 upstream.
The regmap used by max77686 MFD driver was not freed with regmap_exit()
on driver exit. This lead to leak of resources.
Replace regmap_init_i2c() call in driver probe with initialization of
managed register map so the regmap will be properly freed by the device
management code.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mfd/max77686.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index f27a218..541b240 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -103,7 +103,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
max77686->irq_gpio = pdata->irq_gpio;
max77686->irq = i2c->irq;
- max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
+ max77686->regmap = devm_regmap_init_i2c(i2c, &max77686_regmap_config);
if (IS_ERR(max77686->regmap)) {
ret = PTR_ERR(max77686->regmap);
dev_err(max77686->dev, "Failed to allocate register map: %d\n",
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit d8e24525094200601236fa64a54cf73e3d682f2e upstream.
Seems to cause problems with certain DP monitors.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=40699
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 8b92676..ed8bc9d 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -938,11 +938,14 @@ static bool atombios_crtc_prepare_pll(struct drm_crtc *crtc, struct drm_display_
radeon_atombios_get_ppll_ss_info(rdev,
&radeon_crtc->ss,
ATOM_DP_SS_ID1);
- } else
+ } else {
radeon_crtc->ss_enabled =
radeon_atombios_get_ppll_ss_info(rdev,
&radeon_crtc->ss,
ATOM_DP_SS_ID1);
+ }
+ /* disable spread spectrum on DCE3 DP */
+ radeon_crtc->ss_enabled = false;
}
break;
case ATOM_ENCODER_MODE_LVDS:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit d45b964a22cad962d3ede1eba8d24f5cee7b2a92 upstream.
Needed to properly flush the read caches for fences.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/r600.c | 13 +++++++------
drivers/gpu/drm/radeon/r600d.h | 1 +
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c2d7eb6..30320a5 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2989,14 +2989,17 @@ void r600_fence_ring_emit(struct radeon_device *rdev,
struct radeon_fence *fence)
{
struct radeon_ring *ring = &rdev->ring[fence->ring];
+ u32 cp_coher_cntl = PACKET3_TC_ACTION_ENA | PACKET3_VC_ACTION_ENA |
+ PACKET3_SH_ACTION_ENA;
+
+ if (rdev->family >= CHIP_RV770)
+ cp_coher_cntl |= PACKET3_FULL_CACHE_ENA;
if (rdev->wb.use_event) {
u64 addr = rdev->fence_drv[fence->ring].gpu_addr;
/* flush read cache over gart */
radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
- radeon_ring_write(ring, PACKET3_TC_ACTION_ENA |
- PACKET3_VC_ACTION_ENA |
- PACKET3_SH_ACTION_ENA);
+ radeon_ring_write(ring, cp_coher_cntl);
radeon_ring_write(ring, 0xFFFFFFFF);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 10); /* poll interval */
@@ -3010,9 +3013,7 @@ void r600_fence_ring_emit(struct radeon_device *rdev,
} else {
/* flush read cache over gart */
radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
- radeon_ring_write(ring, PACKET3_TC_ACTION_ENA |
- PACKET3_VC_ACTION_ENA |
- PACKET3_SH_ACTION_ENA);
+ radeon_ring_write(ring, cp_coher_cntl);
radeon_ring_write(ring, 0xFFFFFFFF);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 10); /* poll interval */
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index d079cb1..4dae42c 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -1511,6 +1511,7 @@
# define PACKET3_CP_DMA_CMD_DAIC (1 << 29)
#define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
+# define PACKET3_FULL_CACHE_ENA (1 << 20) /* r7xx+ only */
# define PACKET3_TC_ACTION_ENA (1 << 23)
# define PACKET3_VC_ACTION_ENA (1 << 24)
# define PACKET3_CB_ACTION_ENA (1 << 25)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 10e9ffae463396c5a25fdfe8a48d7c98a87f6b85 upstream.
We need to set the engine bit to select the ME and
also set the full cache bit. Should help stability
on TN and cayman.
V2: fix up surface sync in ib execute as well
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/ni.c | 16 +++++++---------
drivers/gpu/drm/radeon/nid.h | 1 +
2 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index b2a76f5..9a3849d 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1331,13 +1331,12 @@ void cayman_fence_ring_emit(struct radeon_device *rdev,
{
struct radeon_ring *ring = &rdev->ring[fence->ring];
u64 addr = rdev->fence_drv[fence->ring].gpu_addr;
+ u32 cp_coher_cntl = PACKET3_FULL_CACHE_ENA | PACKET3_TC_ACTION_ENA |
+ PACKET3_SH_ACTION_ENA;
/* flush read cache over gart for this vmid */
- radeon_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1));
- radeon_ring_write(ring, (CP_COHER_CNTL2 - PACKET3_SET_CONFIG_REG_START) >> 2);
- radeon_ring_write(ring, 0);
radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
- radeon_ring_write(ring, PACKET3_TC_ACTION_ENA | PACKET3_SH_ACTION_ENA);
+ radeon_ring_write(ring, PACKET3_ENGINE_ME | cp_coher_cntl);
radeon_ring_write(ring, 0xFFFFFFFF);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 10); /* poll interval */
@@ -1353,6 +1352,8 @@ void cayman_fence_ring_emit(struct radeon_device *rdev,
void cayman_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib)
{
struct radeon_ring *ring = &rdev->ring[ib->ring];
+ u32 cp_coher_cntl = PACKET3_FULL_CACHE_ENA | PACKET3_TC_ACTION_ENA |
+ PACKET3_SH_ACTION_ENA;
/* set to DX10/11 mode */
radeon_ring_write(ring, PACKET3(PACKET3_MODE_CONTROL, 0));
@@ -1377,14 +1378,11 @@ void cayman_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib)
(ib->vm ? (ib->vm->id << 24) : 0));
/* flush read cache over gart for this vmid */
- radeon_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1));
- radeon_ring_write(ring, (CP_COHER_CNTL2 - PACKET3_SET_CONFIG_REG_START) >> 2);
- radeon_ring_write(ring, ib->vm ? ib->vm->id : 0);
radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
- radeon_ring_write(ring, PACKET3_TC_ACTION_ENA | PACKET3_SH_ACTION_ENA);
+ radeon_ring_write(ring, PACKET3_ENGINE_ME | cp_coher_cntl);
radeon_ring_write(ring, 0xFFFFFFFF);
radeon_ring_write(ring, 0);
- radeon_ring_write(ring, 10); /* poll interval */
+ radeon_ring_write(ring, ((ib->vm ? ib->vm->id : 0) << 24) | 10); /* poll interval */
}
void cayman_uvd_semaphore_emit(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h
index 22421bc..d996033 100644
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -1154,6 +1154,7 @@
# define PACKET3_DB_ACTION_ENA (1 << 26)
# define PACKET3_SH_ACTION_ENA (1 << 27)
# define PACKET3_SX_ACTION_ENA (1 << 28)
+# define PACKET3_ENGINE_ME (1 << 31)
#define PACKET3_ME_INITIALIZE 0x44
#define PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16)
#define PACKET3_COND_WRITE 0x45
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 8097d94116d0c17e774ba4c8256e774018dc2a46 upstream.
Mclk switching doesn't seem to work reliably on these
cards. Most RV770 boards specify the same mclk for all
performance levels anyway so in most cases, this has
no affect.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73067
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/rv770_dpm.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c
index 4f17b31..a923ba9 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -2536,6 +2536,12 @@ bool rv770_dpm_vblank_too_short(struct radeon_device *rdev)
(rdev->pdev->subsystem_device == 0x1c42))
switch_limit = 200;
+ /* RV770 */
+ /* mclk switching doesn't seem to work reliably on desktop RV770s */
+ if ((rdev->family == CHIP_RV770) &&
+ !(rdev->flags & RADEON_IS_MOBILITY))
+ switch_limit = 0xffffffff; /* disable mclk switching */
+
if (vblank_time < switch_limit)
return true;
else
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Bing Zhao <[email protected]>
commit 1e202242ee1432d68a8bea4919b2ae0ef19d9e06 upstream.
bit 14 is actually reserved and bit 12 & 13 should be used for
11ac capability in fw_cap_info.
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/fw.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 1b45aa5..f2cf3dc 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -228,7 +228,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
/* HW_SPEC fw_cap_info */
-#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(13)|BIT(14)))
+#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(12)|BIT(13)))
#define GET_VHTCAP_CHWDSET(vht_cap_info) ((vht_cap_info >> 2) & 0x3)
#define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen-Yu Tsai <[email protected]>
commit fa8cf57c923e86a693a85aff1df579245a27cbb3 upstream.
Some GPIO users, such as fixed-regulator, request GPIO output with
initial value of 1. This was ignored by sunxi driver.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/pinctrl/pinctrl-sunxi.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index 94716c7..0d9a1cf 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -472,12 +472,6 @@ static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset)
return val;
}
-static int sunxi_pinctrl_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- return pinctrl_gpio_direction_output(chip->base + offset);
-}
-
static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,
unsigned offset, int value)
{
@@ -501,6 +495,13 @@ static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip,
spin_unlock_irqrestore(&pctl->lock, flags);
}
+static int sunxi_pinctrl_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ sunxi_pinctrl_gpio_set(chip, offset, value);
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec,
u32 *flags)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Triplett <[email protected]>
commit 2b92865e648ce04a39fda4f903784a5d01ecb0dc upstream.
turbostat uses inline assembly to call cpuid. On 32-bit x86, on systems
that have certain security features enabled by default that make -fPIC
the default, this causes a build error:
turbostat.c: In function ‘check_cpuid’:
turbostat.c:1906:2: error: PIC register clobbered by ‘ebx’ in ‘asm’
asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
^
GCC provides a header cpuid.h, containing a __get_cpuid function that
works with both PIC and non-PIC. (On PIC, it saves and restores ebx
around the cpuid instruction.) Use that instead.
Signed-off-by: Josh Triplett <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
tools/power/x86/turbostat/turbostat.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 5bf4a67..6a7ee5f 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -35,6 +35,7 @@
#include <string.h>
#include <ctype.h>
#include <sched.h>
+#include <cpuid.h>
char *proc_stat = "/proc/stat";
unsigned int interval_sec = 5; /* set with -i interval_sec */
@@ -1894,7 +1895,7 @@ void check_cpuid()
eax = ebx = ecx = edx = 0;
- asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0));
+ __get_cpuid(0, &max_level, &ebx, &ecx, &edx);
if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
genuine_intel = 1;
@@ -1903,7 +1904,7 @@ void check_cpuid()
fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ",
(char *)&ebx, (char *)&edx, (char *)&ecx);
- asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
+ __get_cpuid(1, &fms, &ebx, &ecx, &edx);
family = (fms >> 8) & 0xf;
model = (fms >> 4) & 0xf;
stepping = fms & 0xf;
@@ -1925,7 +1926,7 @@ void check_cpuid()
* This check is valid for both Intel and AMD.
*/
ebx = ecx = edx = 0;
- asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x80000000));
+ __get_cpuid(0x80000000, &max_level, &ebx, &ecx, &edx);
if (max_level < 0x80000007) {
fprintf(stderr, "CPUID: no invariant TSC (max_level 0x%x)\n", max_level);
@@ -1936,7 +1937,7 @@ void check_cpuid()
* Non-Stop TSC is advertised by CPUID.EAX=0x80000007: EDX.bit8
* this check is valid for both Intel and AMD
*/
- asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x80000007));
+ __get_cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
has_invariant_tsc = edx & (1 << 8);
if (!has_invariant_tsc) {
@@ -1949,7 +1950,7 @@ void check_cpuid()
* this check is valid for both Intel and AMD
*/
- asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (0x6));
+ __get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
has_aperf = ecx & (1 << 0);
do_dts = eax & (1 << 0);
do_ptm = eax & (1 << 6);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 64590daa9e0dfb3aad89e3ab9230683b76211d5b upstream.
Both nfs41_walk_client_list and nfs40_walk_client_list expect the
'status' variable to be set to the value -NFS4ERR_STALE_CLIENTID
if the loop fails to find a match.
The problem is that the 'pos->cl_cons_state > NFS_CS_READY' changes
the value of 'status', and sets it either to the value '0' (which
indicates success), or to the value EINTR.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/nfs4client.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 90dce91..3ae4d8c 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -329,9 +329,10 @@ int nfs40_walk_client_list(struct nfs_client *new,
prev = pos;
status = nfs_wait_client_init_complete(pos);
- spin_lock(&nn->nfs_client_lock);
if (status < 0)
- continue;
+ goto out;
+ status = -NFS4ERR_STALE_CLIENTID;
+ spin_lock(&nn->nfs_client_lock);
}
if (pos->cl_cons_state != NFS_CS_READY)
continue;
@@ -469,7 +470,8 @@ int nfs41_walk_client_list(struct nfs_client *new,
}
spin_lock(&nn->nfs_client_lock);
if (status < 0)
- continue;
+ break;
+ status = -NFS4ERR_STALE_CLIENTID;
}
if (pos->cl_cons_state != NFS_CS_READY)
continue;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Triplett <[email protected]>
commit b731f3119de57144e16c19fd593b8daeb637843e upstream.
turbostat's Makefile puts arch/x86/include/uapi/ in the include path, so
that it can include <asm/msr.h> from it. It isn't in general safe to
include even uapi headers directly from the kernel tree without
processing them through scripts/headers_install.sh, but asm/msr.h
happens to work.
However, that include path can break with some versions of system
headers, by overriding some system headers with the unprocessed versions
directly from the kernel source. For instance:
In file included from /build/x86-generic/usr/include/bits/sigcontext.h:28:0,
from /build/x86-generic/usr/include/signal.h:339,
from /build/x86-generic/usr/include/sys/wait.h:31,
from turbostat.c:27:
../../../../arch/x86/include/uapi/asm/sigcontext.h:4:28: fatal error: linux/compiler.h: No such file or directory
This occurs because the system bits/sigcontext.h on that build system
includes <asm/sigcontext.h>, and asm/sigcontext.h in the kernel source
includes <linux/compiler.h>, which scripts/headers_install.sh would have
filtered out.
Since turbostat really only wants a single header, just include that one
header rather than putting an entire directory of kernel headers on the
include path.
In the process, switch from msr.h to msr-index.h, since turbostat just
wants the MSR numbers.
Signed-off-by: Josh Triplett <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
tools/power/x86/turbostat/Makefile | 2 +-
tools/power/x86/turbostat/turbostat.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile
index f09641d..d1b3a36 100644
--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@@ -5,7 +5,7 @@ DESTDIR :=
turbostat : turbostat.c
CFLAGS += -Wall
-CFLAGS += -I../../../../arch/x86/include/uapi/
+CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/uapi/asm/msr-index.h"'
%: %.c
@mkdir -p $(BUILD_OUTPUT)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index fe70207..5bf4a67 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -20,7 +20,7 @@
*/
#define _GNU_SOURCE
-#include <asm/msr.h>
+#include MSRHEADER
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <[email protected]>
commit 765ee51f9a3f652959b4c7297d198a28e37952b4 upstream.
This reverts commit 26abfeed4341872364386c6a52b9acef8c81a81a.
In the eisa_probe() force_probe path, if we were unable to request slot
resources (e.g., [io 0x800-0x8ff]), we skipped the slot with "Cannot
allocate resource for EISA slot %d" before reading the EISA signature in
eisa_init_device().
Commit 26abfeed4341 moved eisa_init_device() earlier, so we tried to read
the EISA signature before requesting the slot resources, and this caused
hangs during boot.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1251816
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/eisa/eisa-bus.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c
index 272a3ec..0314dde 100644
--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
@@ -275,11 +275,13 @@ static int __init eisa_request_resources(struct eisa_root_device *root,
}
if (slot) {
+ edev->res[i].name = NULL;
edev->res[i].start = SLOT_ADDRESS(root, slot)
+ (i * 0x400);
edev->res[i].end = edev->res[i].start + 0xff;
edev->res[i].flags = IORESOURCE_IO;
} else {
+ edev->res[i].name = NULL;
edev->res[i].start = SLOT_ADDRESS(root, slot)
+ EISA_VENDOR_ID_OFFSET;
edev->res[i].end = edev->res[i].start + 3;
@@ -326,19 +328,20 @@ static int __init eisa_probe(struct eisa_root_device *root)
return -ENOMEM;
}
- if (eisa_init_device(root, edev, 0)) {
+ if (eisa_request_resources(root, edev, 0)) {
+ dev_warn(root->dev,
+ "EISA: Cannot allocate resource for mainboard\n");
kfree(edev);
if (!root->force_probe)
- return -ENODEV;
+ return -EBUSY;
goto force_probe;
}
- if (eisa_request_resources(root, edev, 0)) {
- dev_warn(root->dev,
- "EISA: Cannot allocate resource for mainboard\n");
+ if (eisa_init_device(root, edev, 0)) {
+ eisa_release_resources(edev);
kfree(edev);
if (!root->force_probe)
- return -EBUSY;
+ return -ENODEV;
goto force_probe;
}
@@ -361,11 +364,6 @@ static int __init eisa_probe(struct eisa_root_device *root)
continue;
}
- if (eisa_init_device(root, edev, i)) {
- kfree(edev);
- continue;
- }
-
if (eisa_request_resources(root, edev, i)) {
dev_warn(root->dev,
"Cannot allocate resource for EISA slot %d\n",
@@ -374,6 +372,12 @@ static int __init eisa_probe(struct eisa_root_device *root)
continue;
}
+ if (eisa_init_device(root, edev, i)) {
+ eisa_release_resources(edev);
+ kfree(edev);
+ continue;
+ }
+
if (edev->state == (EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED))
enabled_str = " (forced enabled)";
else if (edev->state == EISA_CONFIG_FORCED)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Mayhew <[email protected]>
commit 263b4509ec4d47e0da3e753f85a39ea12d1eff24 upstream.
We should always make sure the cached page is up-to-date when we're
determining whether we can extend a write to cover the full page -- even
if we've received a write delegation from the server.
Commit c7559663 added logic to skip this check if we have a write
delegation, which can lead to data corruption such as the following
scenario if client B receives a write delegation from the NFS server:
Client A:
# echo 123456789 > /mnt/file
Client B:
# echo abcdefghi >> /mnt/file
# cat /mnt/file
0�D0�abcdefghi
Just because we hold a write delegation doesn't mean that we've read in
the entire page contents.
Signed-off-by: Scott Mayhew <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/write.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index f1bdb72..058d64c 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -893,19 +893,20 @@ out:
* extend the write to cover the entire page in order to avoid fragmentation
* inefficiencies.
*
- * If the file is opened for synchronous writes or if we have a write delegation
- * from the server then we can just skip the rest of the checks.
+ * If the file is opened for synchronous writes then we can just skip the rest
+ * of the checks.
*/
static int nfs_can_extend_write(struct file *file, struct page *page, struct inode *inode)
{
if (file->f_flags & O_DSYNC)
return 0;
+ if (!nfs_write_pageuptodate(page, inode))
+ return 0;
if (NFS_PROTO(inode)->have_delegation(inode, FMODE_WRITE))
return 1;
- if (nfs_write_pageuptodate(page, inode) && (inode->i_flock == NULL ||
- (inode->i_flock->fl_start == 0 &&
+ if (inode->i_flock == NULL || (inode->i_flock->fl_start == 0 &&
inode->i_flock->fl_end == OFFSET_MAX &&
- inode->i_flock->fl_type != F_RDLCK)))
+ inode->i_flock->fl_type != F_RDLCK))
return 1;
return 0;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Asias He <[email protected]>
commit f466f75385369a181409e46da272db3de6f5c5cb upstream.
vqs are freed in virtscsi_freeze but the hotcpu_notifier is not
unregistered. We will have a use-after-free usage when the notifier
callback is called after virtscsi_freeze.
Fixes: 285e71ea6f3583a85e27cb2b9a7d8c35d4c0d558
("virtio-scsi: reset virtqueue affinity when doing cpu hotplug")
Signed-off-by: Asias He <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/virtio_scsi.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 74b88ef..b26f1a5 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -957,6 +957,10 @@ static void virtscsi_remove(struct virtio_device *vdev)
#ifdef CONFIG_PM
static int virtscsi_freeze(struct virtio_device *vdev)
{
+ struct Scsi_Host *sh = virtio_scsi_host(vdev);
+ struct virtio_scsi *vscsi = shost_priv(sh);
+
+ unregister_hotcpu_notifier(&vscsi->nb);
virtscsi_remove_vqs(vdev);
return 0;
}
@@ -965,8 +969,17 @@ static int virtscsi_restore(struct virtio_device *vdev)
{
struct Scsi_Host *sh = virtio_scsi_host(vdev);
struct virtio_scsi *vscsi = shost_priv(sh);
+ int err;
+
+ err = virtscsi_init(vdev, vscsi);
+ if (err)
+ return err;
+
+ err = register_hotcpu_notifier(&vscsi->nb);
+ if (err)
+ vdev->config->del_vqs(vdev);
- return virtscsi_init(vdev, vscsi);
+ return err;
}
#endif
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <[email protected]>
commit 53dac830537b51df555ba5e7ebb236705b7eaa7c upstream.
In some cases we enter the cursor code with file_priv = NULL causing an oops,
we also can try to unpin something that isn't pinned, and this is a good fix for it.
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/mgag200/mgag200_cursor.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/mgag200/mgag200_cursor.c b/drivers/gpu/drm/mgag200/mgag200_cursor.c
index 801731a..9f9780b 100644
--- a/drivers/gpu/drm/mgag200/mgag200_cursor.c
+++ b/drivers/gpu/drm/mgag200/mgag200_cursor.c
@@ -22,8 +22,10 @@ static void mga_hide_cursor(struct mga_device *mdev)
{
WREG8(MGA_CURPOSXL, 0);
WREG8(MGA_CURPOSXH, 0);
- mgag200_bo_unpin(mdev->cursor.pixels_1);
- mgag200_bo_unpin(mdev->cursor.pixels_2);
+ if (mdev->cursor.pixels_1->pin_count)
+ mgag200_bo_unpin(mdev->cursor.pixels_1);
+ if (mdev->cursor.pixels_2->pin_count)
+ mgag200_bo_unpin(mdev->cursor.pixels_2);
}
int mga_crtc_cursor_set(struct drm_crtc *crtc,
@@ -32,7 +34,7 @@ int mga_crtc_cursor_set(struct drm_crtc *crtc,
uint32_t width,
uint32_t height)
{
- struct drm_device *dev = (struct drm_device *)file_priv->minor->dev;
+ struct drm_device *dev = crtc->dev;
struct mga_device *mdev = (struct mga_device *)dev->dev_private;
struct mgag200_bo *pixels_1 = mdev->cursor.pixels_1;
struct mgag200_bo *pixels_2 = mdev->cursor.pixels_2;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Pokorny <[email protected]>
commit d303b1b5fbb688282bbf72a534b9dfed7af9fe4f upstream.
Add new PCI ID to support new model "Kaveri" family.
Signed-off-by: Philip Pokorny <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/hwmon/k10temp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index e633856..9bcf175 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -211,6 +211,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{}
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Simon Guinot <[email protected]>
commit a96cc303e42ad7830dde929aad0046e448a05505 upstream.
This patch updates the Armada 370/XP SATA node with the new compatible
string "marvell,armada-370-sata".
Signed-off-by: Simon Guinot <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Gregory Clement <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Lior Amsalem <[email protected]>
Acked-by: Jason Cooper <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/boot/dts/armada-370-xp.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index c058ce1..f384baf 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -88,7 +88,7 @@
};
sata@a0000 {
- compatible = "marvell,orion-sata";
+ compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <55>;
clocks = <&gateclk 15>, <&gateclk 30>;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 9f97e4b128d2ea90a5f5063ea0ee3b0911f4c669 upstream.
Before a write starts we set a bit in the write-intent bitmap.
When the write completes we clear that bit if the write was successful
to all devices. However if the write wasn't fully successful we
should not clear the bit. If the faulty drive is subsequently
re-added, the fact that the bit is still set ensure that we will
re-write the data that is missing.
This logic is mediated by the STRIPE_DEGRADED flag - we only clear the
bitmap bit when this flag is not set.
Currently we correctly set the flag if a write starts when some
devices are failed or missing. But we do *not* set the flag if some
device failed during the write attempt.
This is wrong and can result in clearing the bit inappropriately.
So: set the flag when a write fails.
This bug has been present since bitmaps were introduces, so the fix is
suitable for any -stable kernel.
Reported-by: Ethan Wilson <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/raid5.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index dce8be8..a40b969 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1893,6 +1893,7 @@ static void raid5_end_write_request(struct bio *bi, int error)
set_bit(R5_MadeGoodRepl, &sh->dev[i].flags);
} else {
if (!uptodate) {
+ set_bit(STRIPE_DEGRADED, &sh->state);
set_bit(WriteErrorSeen, &rdev->flags);
set_bit(R5_WriteError, &sh->dev[i].flags);
if (!test_and_set_bit(WantReplacement, &rdev->flags))
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Simon Guinot <[email protected]>
commit b1f5c73bd5a4752efb7d7af019034044b08aafe9 upstream.
The sata_mv driver supports the SATA IP found in several Marvell SoCs.
As some new SATA registers have been introduced with the Armada 370/XP
SoCs, a way to identify them is needed.
This patch introduces a new compatible string for the SATA IP found in
Armada 370/XP SoCs.
Signed-off-by: Simon Guinot <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Gregory Clement <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Lior Amsalem <[email protected]>
Acked-by: Jason Cooper <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
Documentation/devicetree/bindings/ata/marvell.txt | 2 +-
drivers/ata/sata_mv.c | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
index b5cdd20..1c83516 100644
--- a/Documentation/devicetree/bindings/ata/marvell.txt
+++ b/Documentation/devicetree/bindings/ata/marvell.txt
@@ -1,7 +1,7 @@
* Marvell Orion SATA
Required Properties:
-- compatibility : "marvell,orion-sata"
+- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
- reg : Address range of controller
- interrupts : Interrupt controller is using
- nr-ports : Number of SATA ports in use.
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 35c6b6d..9258775 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4216,6 +4216,7 @@ static int mv_platform_resume(struct platform_device *pdev)
#ifdef CONFIG_OF
static struct of_device_id mv_sata_dt_ids[] = {
+ { .compatible = "marvell,armada-370-sata", },
{ .compatible = "marvell,orion-sata", },
{},
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Tosatti <[email protected]>
commit 9ed96e87c5748de4c2807ef17e81287c7304186c upstream.
Limit PIT timer frequency similarly to the limit applied by
LAPIC timer.
Reviewed-by: Jan Kiszka <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kvm/i8254.c | 18 ++++++++++++++++++
arch/x86/kvm/lapic.c | 3 ---
arch/x86/kvm/x86.c | 3 +++
arch/x86/kvm/x86.h | 2 ++
4 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 412a5aa..518d864 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -37,6 +37,7 @@
#include "irq.h"
#include "i8254.h"
+#include "x86.h"
#ifndef CONFIG_X86_64
#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -349,6 +350,23 @@ static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
atomic_set(&ps->pending, 0);
ps->irq_ack = 1;
+ /*
+ * Do not allow the guest to program periodic timers with small
+ * interval, since the hrtimers are not throttled by the host
+ * scheduler.
+ */
+ if (ps->is_periodic) {
+ s64 min_period = min_timer_period_us * 1000LL;
+
+ if (ps->period < min_period) {
+ pr_info_ratelimited(
+ "kvm: requested %lld ns "
+ "i8254 timer period limited to %lld ns\n",
+ ps->period, min_period);
+ ps->period = min_period;
+ }
+ }
+
hrtimer_start(&ps->timer, ktime_add_ns(ktime_get(), interval),
HRTIMER_MODE_ABS);
}
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index dedd7c2..f213cbc 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -71,9 +71,6 @@
#define VEC_POS(v) ((v) & (32 - 1))
#define REG_POS(v) (((v) >> 5) << 4)
-static unsigned int min_timer_period_us = 500;
-module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
-
static inline void apic_set_reg(struct kvm_lapic *apic, int reg_off, u32 val)
{
*((u32 *) (apic->regs + reg_off)) = val;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 34e2e19..6740fbf 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -94,6 +94,9 @@ EXPORT_SYMBOL_GPL(kvm_x86_ops);
static bool ignore_msrs = 0;
module_param(ignore_msrs, bool, S_IRUGO | S_IWUSR);
+unsigned int min_timer_period_us = 500;
+module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
+
bool kvm_has_tsc_control;
EXPORT_SYMBOL_GPL(kvm_has_tsc_control);
u32 kvm_max_guest_tsc_khz;
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index e224f7a..3186542 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -124,5 +124,7 @@ int kvm_write_guest_virt_system(struct x86_emulate_ctxt *ctxt,
extern u64 host_xcr0;
+extern unsigned int min_timer_period_us;
+
extern struct static_key kvm_no_apic_vcpu;
#endif
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 2995fa78e423d7193f3b57835f6c1c75006a0315 upstream.
This reverts commit be35f48610 ("dm: wait until embedded kobject is
released before destroying a device") and provides an improved fix.
The kobject release code that calls the completion must be placed in a
non-module file, otherwise there is a module unload race (if the process
calling dm_kobject_release is preempted and the DM module unloaded after
the completion is triggered, but before dm_kobject_release returns).
To fix this race, this patch moves the completion code to dm-builtin.c
which is always compiled directly into the kernel if BLK_DEV_DM is
selected.
The patch introduces a new dm_kobject_holder structure, its purpose is
to keep the completion and kobject in one place, so that it can be
accessed from non-module code without the need to export the layout of
struct mapped_device to that code.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/Kconfig | 4 ++++
drivers/md/Makefile | 1 +
drivers/md/dm-builtin.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
drivers/md/dm-sysfs.c | 5 -----
drivers/md/dm.c | 20 +++++---------------
drivers/md/dm.h | 17 ++++++++++++++++-
6 files changed, 74 insertions(+), 21 deletions(-)
create mode 100644 drivers/md/dm-builtin.c
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 30b426e..34d0097 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -176,8 +176,12 @@ config MD_FAULTY
source "drivers/md/bcache/Kconfig"
+config BLK_DEV_DM_BUILTIN
+ boolean
+
config BLK_DEV_DM
tristate "Device mapper support"
+ select BLK_DEV_DM_BUILTIN
---help---
Device-mapper is a low level volume manager. It works by allowing
people to specify mappings for ranges of logical sectors. Various
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 5ef78ef..109b6bd 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_MD_FAULTY) += faulty.o
obj-$(CONFIG_BCACHE) += bcache/
obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
+obj-$(CONFIG_BLK_DEV_DM_BUILTIN) += dm-builtin.o
obj-$(CONFIG_DM_BUFIO) += dm-bufio.o
obj-$(CONFIG_DM_BIO_PRISON) += dm-bio-prison.o
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
diff --git a/drivers/md/dm-builtin.c b/drivers/md/dm-builtin.c
new file mode 100644
index 0000000..6c9049c
--- /dev/null
+++ b/drivers/md/dm-builtin.c
@@ -0,0 +1,48 @@
+#include "dm.h"
+
+/*
+ * The kobject release method must not be placed in the module itself,
+ * otherwise we are subject to module unload races.
+ *
+ * The release method is called when the last reference to the kobject is
+ * dropped. It may be called by any other kernel code that drops the last
+ * reference.
+ *
+ * The release method suffers from module unload race. We may prevent the
+ * module from being unloaded at the start of the release method (using
+ * increased module reference count or synchronizing against the release
+ * method), however there is no way to prevent the module from being
+ * unloaded at the end of the release method.
+ *
+ * If this code were placed in the dm module, the following race may
+ * happen:
+ * 1. Some other process takes a reference to dm kobject
+ * 2. The user issues ioctl function to unload the dm device
+ * 3. dm_sysfs_exit calls kobject_put, however the object is not released
+ * because of the other reference taken at step 1
+ * 4. dm_sysfs_exit waits on the completion
+ * 5. The other process that took the reference in step 1 drops it,
+ * dm_kobject_release is called from this process
+ * 6. dm_kobject_release calls complete()
+ * 7. a reschedule happens before dm_kobject_release returns
+ * 8. dm_sysfs_exit continues, the dm device is unloaded, module reference
+ * count is decremented
+ * 9. The user unloads the dm module
+ * 10. The other process that was rescheduled in step 7 continues to run,
+ * it is now executing code in unloaded module, so it crashes
+ *
+ * Note that if the process that takes the foreign reference to dm kobject
+ * has a low priority and the system is sufficiently loaded with
+ * higher-priority processes that prevent the low-priority process from
+ * being scheduled long enough, this bug may really happen.
+ *
+ * In order to fix this module unload race, we place the release method
+ * into a helper code that is compiled directly into the kernel.
+ */
+
+void dm_kobject_release(struct kobject *kobj)
+{
+ complete(dm_get_completion_from_kobject(kobj));
+}
+
+EXPORT_SYMBOL(dm_kobject_release);
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index e0cc5d6..c62c5ab 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -79,11 +79,6 @@ static const struct sysfs_ops dm_sysfs_ops = {
.show = dm_attr_show,
};
-static void dm_kobject_release(struct kobject *kobj)
-{
- complete(dm_get_completion_from_kobject(kobj));
-}
-
/*
* dm kobject is embedded in mapped_device structure
* no need to define release function here
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 267495c..a98a8ba 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -193,11 +193,8 @@ struct mapped_device {
/* forced geometry settings */
struct hd_geometry geometry;
- /* sysfs handle */
- struct kobject kobj;
-
- /* wait until the kobject is released */
- struct completion kobj_completion;
+ /* kobject and completion */
+ struct dm_kobject_holder kobj_holder;
/* zero-length flush that will be cloned and submitted to targets */
struct bio flush_bio;
@@ -1939,7 +1936,7 @@ static struct mapped_device *alloc_dev(int minor)
init_waitqueue_head(&md->wait);
INIT_WORK(&md->work, dm_wq_work);
init_waitqueue_head(&md->eventq);
- init_completion(&md->kobj_completion);
+ init_completion(&md->kobj_holder.completion);
md->disk->major = _major;
md->disk->first_minor = minor;
@@ -2765,14 +2762,14 @@ struct gendisk *dm_disk(struct mapped_device *md)
struct kobject *dm_kobject(struct mapped_device *md)
{
- return &md->kobj;
+ return &md->kobj_holder.kobj;
}
struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
{
struct mapped_device *md;
- md = container_of(kobj, struct mapped_device, kobj);
+ md = container_of(kobj, struct mapped_device, kobj_holder.kobj);
if (test_bit(DMF_FREEING, &md->flags) ||
dm_deleting_md(md))
@@ -2782,13 +2779,6 @@ struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
return md;
}
-struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
-{
- struct mapped_device *md = container_of(kobj, struct mapped_device, kobj);
-
- return &md->kobj_completion;
-}
-
int dm_suspended_md(struct mapped_device *md)
{
return test_bit(DMF_SUSPENDED, &md->flags);
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 66cfb7d..9b3222f 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -16,6 +16,7 @@
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/completion.h>
+#include <linux/kobject.h>
/*
* Suspend feature flags
@@ -126,11 +127,25 @@ void dm_interface_exit(void);
/*
* sysfs interface
*/
+struct dm_kobject_holder {
+ struct kobject kobj;
+ struct completion completion;
+};
+
+static inline struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
+{
+ return &container_of(kobj, struct dm_kobject_holder, kobj)->completion;
+}
+
int dm_sysfs_init(struct mapped_device *md);
void dm_sysfs_exit(struct mapped_device *md);
struct kobject *dm_kobject(struct mapped_device *md);
struct mapped_device *dm_get_from_kobject(struct kobject *kobj);
-struct completion *dm_get_completion_from_kobject(struct kobject *kobj);
+
+/*
+ * The kobject helper
+ */
+void dm_kobject_release(struct kobject *kobj);
/*
* Targets for linear and striped mappings
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 1ddd641ddcfa46d719189468b6856e9b17381a61 upstream.
The comparison is always true and the compiler optimizes it out anyway.
Milan offered additional context relative to the original commit
784aae735d ("dm: add name and uuid to sysfs") which introduced the code:
"I think it is just relict of some experiments before I committed this
simple embedded sysfs kobj handling".
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Milan Broz <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
[ luis: 3.11.y prereq for:
- 2995fa7 "dm sysfs: fix a module unload race" ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 0cc1449..267495c 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2768,17 +2768,11 @@ struct kobject *dm_kobject(struct mapped_device *md)
return &md->kobj;
}
-/*
- * struct mapped_device should not be exported outside of dm.c
- * so use this check to verify that kobj is part of md structure
- */
struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
{
struct mapped_device *md;
md = container_of(kobj, struct mapped_device, kobj);
- if (&md->kobj != kobj)
- return NULL;
if (test_bit(DMF_FREEING, &md->flags) ||
dm_deleting_md(md))
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Srivatsa S. Bhat" <[email protected]>
commit d4edc5b6c480a0917e61d93d55531d7efa6230be upstream.
On POWER platforms, the hypervisor can notify the guest kernel about dynamic
changes in the cpu-numa associativity (VPHN topology update). Hence the
cpu-to-node mappings that we got from the firmware during boot, may no longer
be valid after such updates. This is handled using the arch_update_cpu_topology()
hook in the scheduler, and the sched-domains are rebuilt according to the new
mappings.
But unfortunately, at the moment, CPU hotplug ignores these updated mappings
and instead queries the firmware for the cpu-to-numa relationships and uses
them during CPU online. So the kernel can end up assigning wrong NUMA nodes
to CPUs during subsequent CPU hotplug online operations (after booting).
Further, a particularly problematic scenario can result from this bug:
On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8)
threads per core. The switch to Single-Threaded (ST) mode is performed by
offlining all except the first CPU thread in each core. Switching back to
SMT mode involves onlining those other threads back, in each core.
Now consider this scenario:
1. During boot, the kernel gets the cpu-to-node mappings from the firmware
and assigns the CPUs to NUMA nodes appropriately, during CPU online.
2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and
communicates this update to the kernel. The kernel in turn updates its
cpu-to-node associations and rebuilds its sched domains. Everything is
fine so far.
3. Now, the user switches the machine from SMT to ST mode (say, by running
ppc64_cpu --smt=1). This involves offlining all except 1 thread in each
core.
4. The user then tries to switch back from ST to SMT mode (say, by running
ppc64_cpu --smt=4), and this involves onlining those threads back. Since
CPU hotplug ignores the new mappings, it queries the firmware and tries to
associate the newly onlined sibling threads to the old NUMA nodes. This
results in sibling threads within the same core getting associated with
different NUMA nodes, which is incorrect.
The scheduler's build-sched-domains code gets thoroughly confused with this
and enters an infinite loop and causes soft-lockups, as explained in detail
in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings).
So to fix this, use the numa_cpu_lookup_table to remember the updated
cpu-to-node mappings, and use them during CPU hotplug online operations.
Further, we also need to ensure that all threads in a core are assigned to a
common NUMA node, irrespective of whether all those threads were online during
the topology update. To achieve this, we take care not to use cpu_sibling_mask()
since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread()
and set up the mappings manually using the 'threads_per_core' value for that
particular platform. This helps us ensure that we don't hit this bug with any
combination of CPU hotplug and SMT mode switching.
Signed-off-by: Srivatsa S. Bhat <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/powerpc/include/asm/topology.h | 10 +++++-
arch/powerpc/mm/numa.c | 70 +++++++++++++++++++++++++++++++++++--
2 files changed, 76 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 161ab66..884b001 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -22,7 +22,15 @@ struct device_node;
static inline int cpu_to_node(int cpu)
{
- return numa_cpu_lookup_table[cpu];
+ int nid;
+
+ nid = numa_cpu_lookup_table[cpu];
+
+ /*
+ * During early boot, the numa-cpu lookup table might not have been
+ * setup for all CPUs yet. In such cases, default to node 0.
+ */
+ return (nid < 0) ? 0 : nid;
}
#define parent_node(node) (node)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5850798..a41db8d 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -31,6 +31,8 @@
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/smp.h>
+#include <asm/cputhreads.h>
+#include <asm/topology.h>
#include <asm/firmware.h>
#include <asm/paca.h>
#include <asm/hvcall.h>
@@ -152,9 +154,22 @@ static void __init get_node_active_region(unsigned long pfn,
}
}
-static void map_cpu_to_node(int cpu, int node)
+static void reset_numa_cpu_lookup_table(void)
+{
+ unsigned int cpu;
+
+ for_each_possible_cpu(cpu)
+ numa_cpu_lookup_table[cpu] = -1;
+}
+
+static void update_numa_cpu_lookup_table(unsigned int cpu, int node)
{
numa_cpu_lookup_table[cpu] = node;
+}
+
+static void map_cpu_to_node(int cpu, int node)
+{
+ update_numa_cpu_lookup_table(cpu, node);
dbg("adding cpu %d to node %d\n", cpu, node);
@@ -519,11 +534,24 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
*/
static int numa_setup_cpu(unsigned long lcpu)
{
- int nid = 0;
- struct device_node *cpu = of_get_cpu_node(lcpu, NULL);
+ int nid;
+ struct device_node *cpu;
+
+ /*
+ * If a valid cpu-to-node mapping is already available, use it
+ * directly instead of querying the firmware, since it represents
+ * the most recent mapping notified to us by the platform (eg: VPHN).
+ */
+ if ((nid = numa_cpu_lookup_table[lcpu]) >= 0) {
+ map_cpu_to_node(lcpu, nid);
+ return nid;
+ }
+
+ cpu = of_get_cpu_node(lcpu, NULL);
if (!cpu) {
WARN_ON(1);
+ nid = 0;
goto out;
}
@@ -1065,6 +1093,7 @@ void __init do_init_bootmem(void)
*/
setup_node_to_cpumask_map();
+ reset_numa_cpu_lookup_table();
register_cpu_notifier(&ppc64_numa_nb);
cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
(void *)(unsigned long)boot_cpuid);
@@ -1442,6 +1471,33 @@ static int update_cpu_topology(void *data)
return 0;
}
+static int update_lookup_table(void *data)
+{
+ struct topology_update_data *update;
+
+ if (!data)
+ return -EINVAL;
+
+ /*
+ * Upon topology update, the numa-cpu lookup table needs to be updated
+ * for all threads in the core, including offline CPUs, to ensure that
+ * future hotplug operations respect the cpu-to-node associativity
+ * properly.
+ */
+ for (update = data; update; update = update->next) {
+ int nid, base, j;
+
+ nid = update->new_nid;
+ base = cpu_first_thread_sibling(update->cpu);
+
+ for (j = 0; j < threads_per_core; j++) {
+ update_numa_cpu_lookup_table(base + j, nid);
+ }
+ }
+
+ return 0;
+}
+
/*
* Update the node maps and sysfs entries for each cpu whose home node
* has changed. Returns 1 when the topology has changed, and 0 otherwise.
@@ -1510,6 +1566,14 @@ int arch_update_cpu_topology(void)
stop_machine(update_cpu_topology, &updates[0], &updated_cpus);
+ /*
+ * Update the numa-cpu lookup table with the new mappings, even for
+ * offline CPUs. It is best to perform this update from the stop-
+ * machine context.
+ */
+ stop_machine(update_lookup_table, &updates[0],
+ cpumask_of(raw_smp_processor_id()));
+
for (ud = &updates[0]; ud; ud = ud->next) {
unregister_cpu_under_node(ud->cpu, ud->old_nid);
register_cpu_under_node(ud->cpu, ud->new_nid);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit dced341b2d4f06668efaab33f88de5d287c0f45b upstream.
The trace buffer has a descriptor pointer that goes back to the trace
array. But it was never assigned. Luckily, nothing uses it (yet), but
it will in the future.
Although nothing currently uses this, if any of the new features get
backported to older kernels, and because this is such a simple change,
I'm marking it for stable too.
Fixes: 12883efb670c "tracing: Consolidate max_tr into main trace_array structure"
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/trace/trace.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 207f5fc..878785b 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -5875,6 +5875,8 @@ allocate_trace_buffer(struct trace_array *tr, struct trace_buffer *buf, int size
rb_flags = trace_flags & TRACE_ITER_OVERWRITE ? RB_FL_OVERWRITE : 0;
+ buf->tr = tr;
+
buf->buffer = ring_buffer_alloc(size, rb_flags);
if (!buf->buffer)
return -ENOMEM;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit a558d99263936b8a67d4eff8918745a77bfd8c31 upstream.
Remove __initdata attribute, as the devices may be used after init
sections are freed.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/xtensa/platforms/xtfpga/setup.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 74bb74f..ea2d39d 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -194,7 +194,7 @@ void __init platform_calibrate_ccount(void)
* Ethernet -- OpenCores Ethernet MAC (ethoc driver)
*/
-static struct resource ethoc_res[] __initdata = {
+static struct resource ethoc_res[] = {
[0] = { /* register space */
.start = OETH_REGS_PADDR,
.end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
@@ -212,7 +212,7 @@ static struct resource ethoc_res[] __initdata = {
},
};
-static struct ethoc_platform_data ethoc_pdata __initdata = {
+static struct ethoc_platform_data ethoc_pdata = {
/*
* The MAC address for these boards is 00:50:c2:13:6f:xx.
* The last byte (here as zero) is read from the DIP switches on the
@@ -222,7 +222,7 @@ static struct ethoc_platform_data ethoc_pdata __initdata = {
.phy_id = -1,
};
-static struct platform_device ethoc_device __initdata = {
+static struct platform_device ethoc_device = {
.name = "ethoc",
.id = -1,
.num_resources = ARRAY_SIZE(ethoc_res),
@@ -236,13 +236,13 @@ static struct platform_device ethoc_device __initdata = {
* UART
*/
-static struct resource serial_resource __initdata = {
+static struct resource serial_resource = {
.start = DUART16552_PADDR,
.end = DUART16552_PADDR + 0x1f,
.flags = IORESOURCE_MEM,
};
-static struct plat_serial8250_port serial_platform_data[] __initdata = {
+static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = DUART16552_PADDR,
.irq = DUART16552_INTNUM,
@@ -255,7 +255,7 @@ static struct plat_serial8250_port serial_platform_data[] __initdata = {
{ },
};
-static struct platform_device xtavnet_uart __initdata = {
+static struct platform_device xtavnet_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Guy Briggs <[email protected]>
commit e789e561a50de0aaa8c695662d97aaa5eac9d55f upstream.
When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero. Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.
See also:
https://lkml.org/lkml/2013/9/2/473
Signed-off-by: Luiz Capitulino <[email protected]>
Signed-off-by: Dan Duval <[email protected]>
Signed-off-by: Chuck Anderson <[email protected]>
Signed-off-by: Richard Guy Briggs <[email protected]>
Signed-off-by: Eric Paris <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
kernel/audit.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/kernel/audit.c b/kernel/audit.c
index 7ddfd8a..6def25f 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -103,7 +103,8 @@ static int audit_rate_limit;
/* Number of outstanding audit_buffers allowed. */
static int audit_backlog_limit = 64;
-static int audit_backlog_wait_time = 60 * HZ;
+#define AUDIT_BACKLOG_WAIT_TIME (60 * HZ)
+static int audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
static int audit_backlog_wait_overflow = 0;
/* The identity of the user shutting down the audit system. */
@@ -1135,6 +1136,8 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
return NULL;
}
+ audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
+
ab = audit_buffer_alloc(ctx, gfp_mask, type);
if (!ab) {
audit_log_lost("out of memory in audit_log_start");
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jean-Jacques Hiblot <[email protected]>
commit 1588c51cf6d782e63a8719681d905ef0ac22ee62 upstream.
There was a copy/paste error when reading the nwe_pulse value.
Signed-off-by: Jean-Jacques Hiblot <[email protected]>
Acked-by: Boris BREZILLON <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Kevin Hilman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-at91/sam9_smc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 99a0a1d..b26156b 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -101,7 +101,7 @@ static void sam9_smc_cs_read(void __iomem *base,
/* Pulse register */
val = __raw_readl(base + AT91_SMC_PULSE);
- config->nwe_setup = val & AT91_SMC_NWEPULSE;
+ config->nwe_pulse = val & AT91_SMC_NWEPULSE;
config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Chen <[email protected]>
commit 2fc5a7dace3c43e62402ab4e8800a8f1834ffe2a upstream.
We have met a bug that the high bandwidth ISO-TX transfer has failed
at the last packet if it is less than 1024, the TD status shows it
is "Transaction Error".
The root cause of this problem is: the mult value at qh is not correct
for current TD's transfer length. We use TD list to queue un-transfer
TDs, and change mult for new adding TDs. If new adding TDs transfer length
less than 1024, but the queued un-transfer TDs transfer length is larger
than 1024, the transfer error will occur, and vice versa.
Usually, this problem occurs at the last packet, and the first packet for
new frame.
We fixed this problem by setting Mult at QH as the largest value (3), and
set MultO (Multiplier Override) at TD according to every transfer length.
It can cover both hardware version less than 2.3 (the real mult is MultO
if it is not 0) and 2.3+ (the real mult is min(qh.mult, td.multo)).
Since the MultO bits are only existed at TX TD, we keep the ISO-RX behavior
unchanged.
For stable tree: 3.11+.
Cc: Michael Grzeschik <[email protected]>
Reported-by: Matthieu Vanin <[email protected]>
Tested-by: Matthieu Vanin <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/chipidea/udc.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index e475fcd..3a223a8 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -391,6 +391,14 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
+ u32 mul = hwreq->req.length / hwep->ep.maxpacket;
+
+ if (hwreq->req.length == 0
+ || hwreq->req.length % hwep->ep.maxpacket)
+ mul++;
+ node->ptr->token |= mul << __ffs(TD_MULTO);
+ }
temp = (u32) (hwreq->req.dma + hwreq->req.actual);
if (length) {
@@ -513,10 +521,11 @@ static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
hwep->qh.ptr->td.token &=
cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
- if (hwep->type == USB_ENDPOINT_XFER_ISOC) {
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
u32 mul = hwreq->req.length / hwep->ep.maxpacket;
- if (hwreq->req.length % hwep->ep.maxpacket)
+ if (hwreq->req.length == 0
+ || hwreq->req.length % hwep->ep.maxpacket)
mul++;
hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
}
@@ -1169,6 +1178,12 @@ static int ep_enable(struct usb_ep *ep,
if (hwep->num)
cap |= QH_ZLT;
cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
+ /*
+ * For ISO-TX, we set mult at QH as the largest value, and use
+ * MultO at TD as real mult value.
+ */
+ if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
+ cap |= 3 << __ffs(QH_MULT);
hwep->qh.ptr->cap = cpu_to_le32(cap);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Chen <[email protected]>
commit 1071055e2a118a81c0b300d7f4af7eba3f7a7c82 upstream.
Due to imx28 needs ARM swp instruction for writing, we set
CI_HDRC_IMX28_WRITE_FIX for imx28.
This patch is needed for stable tree 3.11+
Cc: [email protected]
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Tested-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 32 ++++++++++++++++++++++++++------
1 file changed, 26 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 14362c0..87e310f 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -27,6 +27,26 @@
#define pdev_to_phy(pdev) \
((struct usb_phy *)platform_get_drvdata(pdev))
+#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0)
+
+struct ci_hdrc_imx_platform_flag {
+ unsigned int flags;
+};
+
+static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
+};
+
+static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
+ .flags = CI_HDRC_IMX_IMX28_WRITE_FIX,
+};
+
+static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
+ { .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
+ { .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
+
struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
@@ -98,6 +118,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
};
struct resource *res;
int ret;
+ const struct of_device_id *of_id =
+ of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
+ const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;
if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL)
&& !usbmisc_ops)
@@ -157,6 +180,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
pdata.phy = data->phy;
+ if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
+ pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;
+
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
@@ -228,12 +254,6 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
- { .compatible = "fsl,imx27-usb", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
-
static struct platform_driver ci_hdrc_imx_driver = {
.probe = ci_hdrc_imx_probe,
.remove = ci_hdrc_imx_remove,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Weston Andros Adamson <[email protected]>
commit 78b19bae0813bd6f921ca58490196abd101297bd upstream.
Don't check for -NFS4ERR_NOTSUPP, it's already been mapped to -ENOTSUPP
by nfs4_stat_to_errno.
This allows the client to mount v4.1 servers that don't support
SECINFO_NO_NAME by falling back to the "guess and check" method of
nfs4_find_root_sec.
Signed-off-by: Weston Andros Adamson <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/nfs4proc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index a1e1f2f..bdaa5a1 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7109,7 +7109,7 @@ nfs41_proc_secinfo_no_name(struct nfs_server *server, struct nfs_fh *fhandle,
switch (err) {
case 0:
case -NFS4ERR_WRONGSEC:
- case -NFS4ERR_NOTSUPP:
+ case -ENOTSUPP:
goto out;
default:
err = nfs4_handle_exception(server, err, &exception);
@@ -7141,7 +7141,7 @@ nfs41_find_root_sec(struct nfs_server *server, struct nfs_fh *fhandle,
* Fall back on "guess and check" method if
* the server doesn't support SECINFO_NO_NAME
*/
- if (err == -NFS4ERR_WRONGSEC || err == -NFS4ERR_NOTSUPP) {
+ if (err == -NFS4ERR_WRONGSEC || err == -ENOTSUPP) {
err = nfs4_find_root_sec(server, fhandle, info);
goto out_freepage;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Chen <[email protected]>
commit ed8f8318d2ef3e5f9e4ddf79349508c116b68d7f upstream.
According to Freescale imx28 Errata, "ENGR119653 USB: ARM to USB
register error issue", All USB register write operations must
use the ARM SWP instruction. So, we implement special hw_write
and hw_test_and_clear for imx28.
Discussion for it at below:
http://marc.info/?l=linux-usb&m=137996395529294&w=2
This patch is needed for stable tree 3.11+.
Cc: [email protected]
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Tested-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/chipidea/ci.h | 26 ++++++++++++++++++++++++--
drivers/usb/chipidea/core.c | 2 ++
drivers/usb/chipidea/host.c | 1 +
include/linux/usb/chipidea.h | 1 +
4 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 33cb29f..7a36c23 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -132,6 +132,7 @@ struct hw_bank {
* @transceiver: pointer to USB PHY, if any
* @hcd: pointer to usb_hcd for ehci host driver
* @debugfs: root dentry for this controller in debugfs
+ * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
*/
struct ci_hdrc {
struct device *dev;
@@ -168,6 +169,7 @@ struct ci_hdrc {
struct usb_phy *transceiver;
struct usb_hcd *hcd;
struct dentry *debugfs;
+ bool imx28_write_fix;
};
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
@@ -248,6 +250,26 @@ static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
return ioread32(ci->hw_bank.regmap[reg]) & mask;
}
+#ifdef CONFIG_SOC_IMX28
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+ __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
+}
+#else
+static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
+{
+}
+#endif
+
+static inline void __hw_write(struct ci_hdrc *ci, u32 val,
+ void __iomem *addr)
+{
+ if (ci->imx28_write_fix)
+ imx28_ci_writel(val, addr);
+ else
+ iowrite32(val, addr);
+}
+
/**
* hw_write: writes to a hw register
* @reg: register index
@@ -261,7 +283,7 @@ static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
| (data & mask);
- iowrite32(data, ci->hw_bank.regmap[reg]);
+ __hw_write(ci, data, ci->hw_bank.regmap[reg]);
}
/**
@@ -276,7 +298,7 @@ static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
{
u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
- iowrite32(val, ci->hw_bank.regmap[reg]);
+ __hw_write(ci, val, ci->hw_bank.regmap[reg]);
return val;
}
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a5df24c..f698637 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -432,6 +432,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
ci->transceiver = ci->platdata->phy;
else
ci->global_phy = true;
+ ci->imx28_write_fix = !!(ci->platdata->flags &
+ CI_HDRC_IMX28_WRITE_FIX);
ret = hw_device_init(ci, base);
if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 40d0fda..309c4ab 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -63,6 +63,7 @@ static int host_start(struct ci_hdrc *ci)
ehci = hcd_to_ehci(hcd);
ehci->caps = ci->hw_bank.cap;
ehci->has_hostpc = ci->hw_bank.lpm;
+ ehci->imx28_write_fix = ci->imx28_write_fix;
ret = usb_add_hcd(hcd, 0, 0);
if (ret)
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 2562994..2196bc1 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -20,6 +20,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_REQUIRE_TRANSCEIVER BIT(1)
#define CI_HDRC_PULLUP_ON_VBUS BIT(2)
#define CI_HDRC_DISABLE_STREAMING BIT(3)
+#define CI_HDRC_IMX28_WRITE_FIX BIT(5)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 452028665312672c6ba9e16a19248ee00ead9400 upstream.
The asyncronous firmware load uses a completion struct to hold firmware
processing until the user-space routines are up and running. There is.
however, a problem in that the waiter is nevered canceled during teardown.
As a result, unloading the driver when firmware is not available causes an oops.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/b43legacy/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 5726688..349c776 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3919,6 +3919,7 @@ static void b43legacy_remove(struct ssb_device *dev)
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
cancel_work_sync(&wl->firmware_load);
+ complete(&wldev->fw_load_complete);
B43legacy_WARN_ON(!wl);
if (!wldev->fw.ucode)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
commit 2d93aee152b1758a94a18fe15d72153ba73b5679 upstream.
Enabling the oscillator consumes slightly more power (100uA)
but allows to make sure that we exit from L1 on time.
Not doing so might lead to a PCIe specification violation
since we might wake up from L1 at the wrong time.
This issue has been identified on 3160 and 7260 only.
On older NICs L1 off is not enabled, on newer NICs (7265),
the issue is fixed.
When the bug occurs the user sees that the NIC has
disappeared from the PCI bridge, any access to the device
returns 0xff.
This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=64541
and has been extensively discussed here:
http://markmail.org/thread/mfmpzqt3r333n4bo
Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration")
Reported-and-tested-by: wzyboy <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-prph.h | 4 ++++
drivers/net/wireless/iwlwifi/pcie/trans.c | 22 ++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index ff8cc75..4e6dfba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -272,4 +272,8 @@ static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
/*********************** END TX SCHEDULER *************************************/
+/* Oscillator clock */
+#define OSC_CLK (0xa04068)
+#define OSC_CLK_FORCE_CONTROL (0x8)
+
#endif /* __iwl_prph_h__ */
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index ca06967..6c61ee5 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -206,6 +206,28 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans)
goto out;
}
+ if (trans->cfg->host_interrupt_operation_mode) {
+ /*
+ * This is a bit of an abuse - This is needed for 7260 / 3160
+ * only check host_interrupt_operation_mode even if this is
+ * not related to host_interrupt_operation_mode.
+ *
+ * Enable the oscillator to count wake up time for L1 exit. This
+ * consumes slightly more power (100uA) - but allows to be sure
+ * that we wake up from L1 on time.
+ *
+ * This looks weird: read twice the same register, discard the
+ * value, set a bit, and yet again, read that same register
+ * just to discard the value. But that's the way the hardware
+ * seems to like it.
+ */
+ iwl_read_prph(trans, OSC_CLK);
+ iwl_read_prph(trans, OSC_CLK);
+ iwl_set_bits_prph(trans, OSC_CLK, OSC_CLK_FORCE_CONTROL);
+ iwl_read_prph(trans, OSC_CLK);
+ iwl_read_prph(trans, OSC_CLK);
+ }
+
/*
* Enable DMA clock and wait for it to stabilize.
*
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 09164043f63c947a49797750a09ca1cd7c31108e upstream.
In https://bugzilla.kernel.org/show_bug.cgi?id=67561, a locking dependency is reported
when b43 is used with hostapd, and rfkill is used to kill the radio output.
The lockdep splat (in part) is as follows:
======================================================
[ INFO: possible circular locking dependency detected ]
3.12.0 #1 Not tainted
-------------------------------------------------------
rfkill/10040 is trying to acquire lock:
(rtnl_mutex){+.+.+.}, at: [<ffffffff8146f282>] rtnl_lock+0x12/0x20
but task is already holding lock:
(rfkill_global_mutex){+.+.+.}, at: [<ffffffffa04832ca>] rfkill_fop_write+0x6a/0x170 [rfkill]
--snip--
Chain exists of:
rtnl_mutex --> misc_mtx --> rfkill_global_mutex
The fix is to move the initialization of the hardware random number generator
outside the code range covered by the rtnl_mutex.
Reported-by: yury <[email protected]>
Tested-by: yury <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/b43/main.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 0e933bb..bccc6ca 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2424,6 +2424,7 @@ error:
static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl);
static void b43_one_core_detach(struct b43_bus_dev *dev);
+static int b43_rng_init(struct b43_wl *wl);
static void b43_request_firmware(struct work_struct *work)
{
@@ -2475,6 +2476,10 @@ start_ieee80211:
goto err_one_core_detach;
wl->hw_registred = true;
b43_leds_register(wl->current_dev);
+
+ /* Register HW RNG driver */
+ b43_rng_init(wl);
+
goto out;
err_one_core_detach:
@@ -4636,9 +4641,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
return;
- /* Unregister HW RNG driver */
- b43_rng_exit(dev->wl);
-
b43_set_status(dev, B43_STAT_UNINIT);
/* Stop the microcode PSM. */
@@ -4781,9 +4783,6 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
b43_set_status(dev, B43_STAT_INITIALIZED);
- /* Register HW RNG driver */
- b43_rng_init(dev->wl);
-
out:
return err;
@@ -5450,6 +5449,9 @@ static void b43_bcma_remove(struct bcma_device *core)
b43_one_core_detach(wldev->dev);
+ /* Unregister HW RNG driver */
+ b43_rng_exit(wl);
+
b43_leds_unregister(wl);
ieee80211_free_hw(wl->hw);
@@ -5527,6 +5529,9 @@ static void b43_ssb_remove(struct ssb_device *sdev)
b43_one_core_detach(dev);
+ /* Unregister HW RNG driver */
+ b43_rng_exit(wl);
+
if (list_empty(&wl->devlist)) {
b43_leds_unregister(wl);
/* Last core on the chip unregistered.
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 0673effd41dba323d6a280ef37b5ef29f3f5a653 upstream.
The asyncronous firmware load uses a completion struct to hold firmware
processing until the user-space routines are up and running. There is.
however, a problem in that the waiter is nevered canceled during teardown.
As a result, unloading the driver when firmware is not available causes an oops.
To be able to access the completion structure at teardown, it had to be moved
into the b43_wldev structure.
This patch also fixes a typo in a comment.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/b43/b43.h | 4 ++--
drivers/net/wireless/b43/main.c | 10 +++++-----
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 7f3d461..54376fd 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -731,8 +731,6 @@ enum b43_firmware_file_type {
struct b43_request_fw_context {
/* The device we are requesting the fw for. */
struct b43_wldev *dev;
- /* a completion event structure needed if this call is asynchronous */
- struct completion fw_load_complete;
/* a pointer to the firmware object */
const struct firmware *blob;
/* The type of firmware to request. */
@@ -809,6 +807,8 @@ enum {
struct b43_wldev {
struct b43_bus_dev *dev;
struct b43_wl *wl;
+ /* a completion event structure needed if this call is asynchronous */
+ struct completion fw_load_complete;
/* The device initialization status.
* Use b43_status() to query. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index bccc6ca..13f5a3b 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2070,6 +2070,7 @@ void b43_do_release_fw(struct b43_firmware_file *fw)
static void b43_release_firmware(struct b43_wldev *dev)
{
+ complete(&dev->fw_load_complete);
b43_do_release_fw(&dev->fw.ucode);
b43_do_release_fw(&dev->fw.pcm);
b43_do_release_fw(&dev->fw.initvals);
@@ -2095,7 +2096,7 @@ static void b43_fw_cb(const struct firmware *firmware, void *context)
struct b43_request_fw_context *ctx = context;
ctx->blob = firmware;
- complete(&ctx->fw_load_complete);
+ complete(&ctx->dev->fw_load_complete);
}
int b43_do_request_fw(struct b43_request_fw_context *ctx,
@@ -2142,7 +2143,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
}
if (async) {
/* do this part asynchronously */
- init_completion(&ctx->fw_load_complete);
+ init_completion(&ctx->dev->fw_load_complete);
err = request_firmware_nowait(THIS_MODULE, 1, ctx->fwname,
ctx->dev->dev->dev, GFP_KERNEL,
ctx, b43_fw_cb);
@@ -2150,12 +2151,11 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
pr_err("Unable to load firmware\n");
return err;
}
- /* stall here until fw ready */
- wait_for_completion(&ctx->fw_load_complete);
+ wait_for_completion(&ctx->dev->fw_load_complete);
if (ctx->blob)
goto fw_ready;
/* On some ARM systems, the async request will fail, but the next sync
- * request works. For this reason, we dall through here
+ * request works. For this reason, we fall through here
*/
}
err = request_firmware(&ctx->blob, ctx->fwname,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ray Jui <[email protected]>
commit f662ae48ae67dfd42739e65750274fe8de46240a upstream.
Under function mmc_blk_issue_rq, after an MMC discard operation,
the MMC request data structure may be freed in memory. Later in
the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK
is dangerous and invalid. It causes the MMC host not to be released
when it should.
This patch fixes the issue by marking the special request down before
the discard/flush operation.
Reported by: Harold (SoonYeal) Yang <[email protected]>
Signed-off-by: Ray Jui <[email protected]>
Reviewed-by: Seungwon Jeon <[email protected]>
Acked-by: Seungwon Jeon <[email protected]>
Signed-off-by: Chris Ball <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mmc/card/block.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 1a3163f..4e8212c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1959,6 +1959,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
struct mmc_card *card = md->queue.card;
struct mmc_host *host = card->host;
unsigned long flags;
+ unsigned int cmd_flags = req ? req->cmd_flags : 0;
if (req && !mq->mqrq_prev->req)
/* claim host only for the first request */
@@ -1974,7 +1975,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
}
mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
- if (req && req->cmd_flags & REQ_DISCARD) {
+ if (cmd_flags & REQ_DISCARD) {
/* complete ongoing async transfer before issuing discard */
if (card->host->areq)
mmc_blk_issue_rw_rq(mq, NULL);
@@ -1983,7 +1984,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
ret = mmc_blk_issue_secdiscard_rq(mq, req);
else
ret = mmc_blk_issue_discard_rq(mq, req);
- } else if (req && req->cmd_flags & REQ_FLUSH) {
+ } else if (cmd_flags & REQ_FLUSH) {
/* complete ongoing async transfer before issuing flush */
if (card->host->areq)
mmc_blk_issue_rw_rq(mq, NULL);
@@ -1999,7 +2000,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
out:
if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) ||
- (req && (req->cmd_flags & MMC_REQ_SPECIAL_MASK)))
+ (cmd_flags & MMC_REQ_SPECIAL_MASK))
/*
* Release host when there are no more requests
* and after special request(discard, flush) is done.
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ludovic Desroches <[email protected]>
commit 66b512eda74d59b17eac04c4da1b38d82059e6c9 upstream.
With some SDIO devices, timeout errors can happen when reading data.
To solve this issue, the DMA transfer has to be activated before sending
the command to the device. This order is incorrect in PDC mode. So we
have to take care if we are using DMA or PDC to know when to send the
MMC command.
Signed-off-by: Ludovic Desroches <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Chris Ball <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mmc/host/atmel-mci.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 78d7e47..5fd8c2b 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1186,11 +1186,22 @@ static void atmci_start_request(struct atmel_mci *host,
iflags |= ATMCI_CMDRDY;
cmd = mrq->cmd;
cmdflags = atmci_prepare_command(slot->mmc, cmd);
- atmci_send_command(host, cmd, cmdflags);
+
+ /*
+ * DMA transfer should be started before sending the command to avoid
+ * unexpected errors especially for read operations in SDIO mode.
+ * Unfortunately, in PDC mode, command has to be sent before starting
+ * the transfer.
+ */
+ if (host->submit_data != &atmci_submit_data_dma)
+ atmci_send_command(host, cmd, cmdflags);
if (data)
host->submit_data(host, data);
+ if (host->submit_data == &atmci_submit_data_dma)
+ atmci_send_command(host, cmd, cmdflags);
+
if (mrq->stop) {
host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit f87f960b2fb802f26ee3b00c19320e57a9c583ff upstream.
Reported-by: Jan Prinsloo <[email protected]>
Tested-by: Jan Prinsloo <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index a5a1901..8188dcb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -316,6 +316,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+ {RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Amitkumar Karwar <[email protected]>
commit 9795229752c31da0c5f8a7dc4c827665327b52f9 upstream.
It is u64 data received from firmware. Little endian to cpu
conversion is required here.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/mwifiex/scan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index c447d9b..41f72c6 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1652,7 +1652,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
const u8 *ie_buf;
size_t ie_len;
u16 channel = 0;
- u64 fw_tsf = 0;
+ __le64 fw_tsf = 0;
u16 beacon_size = 0;
u32 curr_bcn_bytes;
u32 freq;
@@ -1786,7 +1786,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv,
ie_buf, ie_len, rssi, GFP_KERNEL);
bss_priv = (struct mwifiex_bss_priv *)bss->priv;
bss_priv->band = band;
- bss_priv->fw_tsf = fw_tsf;
+ bss_priv->fw_tsf = le64_to_cpu(fw_tsf);
if (priv->media_connected &&
!memcmp(bssid,
priv->curr_bss_params.bss_descriptor
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Eliad Peller <[email protected]>
commit 91b0d1198417cf4fd9a7bd4138b6909f0b359099 upstream.
Cleanup of iwl_mvm_leds was missing in case of error,
resulting in the following warning:
WARNING: at lib/kobject.c:196 kobject_add_internal+0x1f4/0x210()
kobject_add_internal failed for phy0-led with -EEXIST, don't try to register things with the same name in the same directory.
which prevents further reloads of the driver.
Signed-off-by: Eliad Peller <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/iwlwifi/mvm/ops.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index af79a14..0a677b5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -435,6 +435,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
out_unregister:
ieee80211_unregister_hw(mvm->hw);
+ iwl_mvm_leds_exit(mvm);
out_free:
iwl_phy_db_free(mvm->phy_db);
kfree(mvm->scan_cmd);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Michel=20D=C3=A4nzer?= <[email protected]>
commit 370169516e736edad3b3c5aa49858058f8b55195 upstream.
It's never allocated on systems without an ATOMBIOS or COMBIOS ROM.
Should fix an oops I encountered while resetting the GPU after a lockup
on my PowerBook with an RV350.
Signed-off-by: Michel Dänzer <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/radeon_pm.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 459eb7d..418ca53 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -938,8 +938,10 @@ static void radeon_pm_resume_old(struct radeon_device *rdev)
rdev->pm.current_clock_mode_index = 0;
rdev->pm.current_sclk = rdev->pm.default_sclk;
rdev->pm.current_mclk = rdev->pm.default_mclk;
- rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
- rdev->pm.current_vddci = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.vddci;
+ if (rdev->pm.power_state) {
+ rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+ rdev->pm.current_vddci = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.vddci;
+ }
if (rdev->pm.pm_method == PM_METHOD_DYNPM
&& rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Szyprowski <[email protected]>
commit b80cb8dc4162bc954cc71efec192ed89f2061573 upstream.
s5p_mfc_get_node_type() relies on get_index() helper function, which in
turn relies on video_device index numbers assigned on driver
registration. All this code is not really needed, because there is
already access to respective video_device structures via common
s5p_mfc_dev structure. This fixes the issues introduced by patch
1056e4388b0454917a512618c8416a98628fc9ce ("v4l2-dev: Fix race condition
on __video_register_device"), which has been merged in v3.12-rc1.
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Kamil Debski <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/platform/s5p-mfc/s5p_mfc.c | 28 +++++++------------------
drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 9 --------
2 files changed, 7 insertions(+), 30 deletions(-)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index a130dcd..ac76f8b 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -177,21 +177,6 @@ unlock:
mutex_unlock(&dev->mfc_mutex);
}
-static enum s5p_mfc_node_type s5p_mfc_get_node_type(struct file *file)
-{
- struct video_device *vdev = video_devdata(file);
-
- if (!vdev) {
- mfc_err("failed to get video_device");
- return MFCNODE_INVALID;
- }
- if (vdev->index == 0)
- return MFCNODE_DECODER;
- else if (vdev->index == 1)
- return MFCNODE_ENCODER;
- return MFCNODE_INVALID;
-}
-
static void s5p_mfc_clear_int_flags(struct s5p_mfc_dev *dev)
{
mfc_write(dev, 0, S5P_FIMV_RISC_HOST_INT);
@@ -701,6 +686,7 @@ irq_cleanup_hw:
/* Open an MFC node */
static int s5p_mfc_open(struct file *file)
{
+ struct video_device *vdev = video_devdata(file);
struct s5p_mfc_dev *dev = video_drvdata(file);
struct s5p_mfc_ctx *ctx = NULL;
struct vb2_queue *q;
@@ -738,7 +724,7 @@ static int s5p_mfc_open(struct file *file)
/* Mark context as idle */
clear_work_bit_irqsave(ctx);
dev->ctx[ctx->num] = ctx;
- if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+ if (vdev == dev->vfd_dec) {
ctx->type = MFCINST_DECODER;
ctx->c_ops = get_dec_codec_ops();
s5p_mfc_dec_init(ctx);
@@ -748,7 +734,7 @@ static int s5p_mfc_open(struct file *file)
mfc_err("Failed to setup mfc controls\n");
goto err_ctrls_setup;
}
- } else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+ } else if (vdev == dev->vfd_enc) {
ctx->type = MFCINST_ENCODER;
ctx->c_ops = get_enc_codec_ops();
/* only for encoder */
@@ -793,10 +779,10 @@ static int s5p_mfc_open(struct file *file)
q = &ctx->vq_dst;
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
q->drv_priv = &ctx->fh;
- if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+ if (vdev == dev->vfd_dec) {
q->io_modes = VB2_MMAP;
q->ops = get_dec_queue_ops();
- } else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+ } else if (vdev == dev->vfd_enc) {
q->io_modes = VB2_MMAP | VB2_USERPTR;
q->ops = get_enc_queue_ops();
} else {
@@ -815,10 +801,10 @@ static int s5p_mfc_open(struct file *file)
q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
q->io_modes = VB2_MMAP;
q->drv_priv = &ctx->fh;
- if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+ if (vdev == dev->vfd_dec) {
q->io_modes = VB2_MMAP;
q->ops = get_dec_queue_ops();
- } else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+ } else if (vdev == dev->vfd_enc) {
q->io_modes = VB2_MMAP | VB2_USERPTR;
q->ops = get_enc_queue_ops();
} else {
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
index ef4074c..f804c1f 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -113,15 +113,6 @@ enum s5p_mfc_fmt_type {
};
/**
- * enum s5p_mfc_node_type - The type of an MFC device node.
- */
-enum s5p_mfc_node_type {
- MFCNODE_INVALID = -1,
- MFCNODE_DECODER = 0,
- MFCNODE_ENCODER = 1,
-};
-
-/**
* enum s5p_mfc_inst_type - The type of an MFC instance.
*/
enum s5p_mfc_inst_type {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit fa1e1de6bb679f2c86da3311bbafee7eaf78f125 upstream.
The buffer size on nxt200x is not enough:
...
> Dec 20 10:52:04 rich kernel: [ 31.747949] nxt200x: nxt200x_writebytes: i2c wr reg=002c: len=255 is too big!
...
Increase it to 256 bytes.
Reported-by: Rich Freeman <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb-frontends/nxt200x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c
index fbca985..4bf0575 100644
--- a/drivers/media/dvb-frontends/nxt200x.c
+++ b/drivers/media/dvb-frontends/nxt200x.c
@@ -40,7 +40,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
/* Max transfer size done by I2C transfer functions */
-#define MAX_XFER_SIZE 64
+#define MAX_XFER_SIZE 256
#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
#define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw"
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 3a21f00a5002b14e4aab52aef59d33ed28468a13 upstream.
The latest version of NetworkManager does not recognize the device as wireless
without this change.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/rtl8712/usb_intf.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index c812d6c7..e3a005d 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -358,6 +358,10 @@ static u8 key_2char2num(u8 hch, u8 lch)
return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
}
+static const struct device_type wlan_type = {
+ .name = "wlan",
+};
+
/*
* drv_init() - a device potentially for us
*
@@ -393,6 +397,7 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
padapter->pusb_intf = pusb_intf;
usb_set_intfdata(pusb_intf, pnetdev);
SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
+ pnetdev->dev.type = &wlan_type;
/* step 2. */
padapter->dvobj_init = &r8712_usb_dvobj_init;
padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 80ab8eae70e51d578ebbeb228e0f7a562471b8b7 upstream.
The PCI devices with DMA masks smaller than 32bit should enable
CONFIG_ZONE_DMA. Since the recent change of page allocator, page
allocations via dma_alloc_coherent() with the limited DMA mask bits
may fail more frequently, ended up with no available buffers, when
CONFIG_ZONE_DMA isn't enabled. With CONFIG_ZONE_DMA, the system has
much more chance to obtain such pages.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68221
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/Kconfig | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index fe6fa93..daac7c7 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -30,6 +30,7 @@ config SND_ALS300
select SND_PCM
select SND_AC97_CODEC
select SND_OPL3_LIB
+ select ZONE_DMA
help
Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
@@ -54,6 +55,7 @@ config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
select SND_MPU401_UART
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for the integrated AC97 sound
device on motherboards using the ALi M5451 Audio Controller
@@ -158,6 +160,7 @@ config SND_AZT3328
select SND_PCM
select SND_RAWMIDI
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
@@ -463,6 +466,7 @@ config SND_EMU10K1
select SND_HWDEP
select SND_RAWMIDI
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y to include support for Sound Blaster PCI 512, Live!,
Audigy and E-mu APS (partially supported) soundcards.
@@ -478,6 +482,7 @@ config SND_EMU10K1X
tristate "Emu10k1X (Dell OEM Version)"
select SND_AC97_CODEC
select SND_RAWMIDI
+ select ZONE_DMA
help
Say Y here to include support for the Dell OEM version of the
Sound Blaster Live!.
@@ -511,6 +516,7 @@ config SND_ES1938
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for soundcards based on ESS Solo-1
(ES1938, ES1946, ES1969) chips.
@@ -522,6 +528,7 @@ config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
select SND_MPU401_UART
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for soundcards based on ESS Maestro
1/2/2E chips.
@@ -603,6 +610,7 @@ config SND_ICE1712
select SND_MPU401_UART
select SND_AC97_CODEC
select BITREVERSE
+ select ZONE_DMA
help
Say Y here to include support for soundcards based on the
ICE1712 (Envy24) chip.
@@ -690,6 +698,7 @@ config SND_LX6464ES
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for soundcards based on ESS Maestro 3
(Allegro) chips.
@@ -786,6 +795,7 @@ config SND_SIS7019
tristate "SiS 7019 Audio Accelerator"
depends on X86 && !X86_64
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for the SiS 7019 Audio Accelerator.
@@ -797,6 +807,7 @@ config SND_SONICVIBES
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for soundcards based on the S3
SonicVibes chip.
@@ -808,6 +819,7 @@ config SND_TRIDENT
tristate "Trident 4D-Wave DX/NX; SiS 7018"
select SND_MPU401_UART
select SND_AC97_CODEC
+ select ZONE_DMA
help
Say Y here to include support for soundcards based on Trident
4D-Wave DX/NX or SiS 7018 chips.
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 43a8e50a46a4e1dd1451e4a4ffa1f7695fb7d287 upstream.
AD1986A mic pins (0x1d and 0x1f) share the same widget for controlling
the loopback volume/mute, but the generic parser didn't check it.
This ended up with the duplicated controls for the same effect.
This patch adds the check of the duplication for avoiding it.
After this fix, there will be only one control although it affects
both paths; this remaining issue should be fixed later in a different
patch.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66621
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/pci/hda/hda_generic.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 08172b1..d71509c 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -2827,9 +2827,11 @@ static bool look_for_mix_leaf_ctls(struct hda_codec *codec, hda_nid_t mix_nid,
if (num_conns < idx)
return false;
nid = list[idx];
- if (!*mix_val && nid_has_volume(codec, nid, HDA_OUTPUT))
+ if (!*mix_val && nid_has_volume(codec, nid, HDA_OUTPUT) &&
+ !is_ctl_associated(codec, nid, HDA_OUTPUT, 0, NID_PATH_VOL_CTL))
*mix_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
- if (!*mute_val && nid_has_mute(codec, nid, HDA_OUTPUT))
+ if (!*mute_val && nid_has_mute(codec, nid, HDA_OUTPUT) &&
+ !is_ctl_associated(codec, nid, HDA_OUTPUT, 0, NID_PATH_MUTE_CTL))
*mute_val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
return *mix_val || *mute_val;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley <[email protected]>
commit 9acec059c0cef0bf086c738f4c0b1f4447782a48 upstream.
value uLowNextTBTT yields wrong value.
ULL is needed with qwTSF
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/vt6656/card.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index 24291ae..0beb246 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -761,7 +761,7 @@ u64 CARDqGetNextTBTT(u64 qwTSF, u16 wBeaconInterval)
uBeaconInterval = wBeaconInterval * 1024;
// Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval
- uLowNextTBTT = ((qwTSF & 0xffffffffU) >> 10) << 10;
+ uLowNextTBTT = ((qwTSF & 0xffffffffULL) >> 10) << 10;
uLowRemain = (uLowNextTBTT) % uBeaconInterval;
uHighRemain = ((0x80000000 % uBeaconInterval) * 2 * (u32)(qwTSF >> 32))
% uBeaconInterval;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Kent Overstreet <[email protected]>
commit ef71ec00002d92a08eb27e9d036e3d48835b6597 upstream.
The code that handles overlapping extents that we've just read back in from disk
was depending on the behaviour of the code that handles overlapping extents as
we're inserting into a btree node in the case of an insert that forced an
existing extent to be split: on insert, if we had to split we'd also insert a
new extent to represent the top part of the old extent - and then that new
extent would get written out.
The code that read the extents back in thus not bother with splitting extents -
if it saw an extent that ovelapped in the middle of an older extent, it would
trim the old extent to only represent the bottom part, assuming that the
original insert would've inserted a new extent to represent the top part.
I still haven't figured out _how_ it can happen, but I'm now pretty convinced
(and testing has confirmed) that there's some kind of an obscure corner case
(probably involving extent merging, and multiple overwrites in different sets)
that breaks this. The fix is to change the mergesort fixup code to split extents
itself when required.
Signed-off-by: Kent Overstreet <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/bcache/bset.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/md/bcache/bset.c b/drivers/md/bcache/bset.c
index 22d1ae7..26fdcac 100644
--- a/drivers/md/bcache/bset.c
+++ b/drivers/md/bcache/bset.c
@@ -935,7 +935,7 @@ static void sort_key_next(struct btree_iter *iter,
*i = iter->data[--iter->used];
}
-static void btree_sort_fixup(struct btree_iter *iter)
+static struct bkey *btree_sort_fixup(struct btree_iter *iter, struct bkey *tmp)
{
while (iter->used > 1) {
struct btree_iter_set *top = iter->data, *i = top + 1;
@@ -963,9 +963,22 @@ static void btree_sort_fixup(struct btree_iter *iter)
} else {
/* can't happen because of comparison func */
BUG_ON(!bkey_cmp(&START_KEY(top->k), &START_KEY(i->k)));
- bch_cut_back(&START_KEY(i->k), top->k);
+
+ if (bkey_cmp(i->k, top->k) < 0) {
+ bkey_copy(tmp, top->k);
+
+ bch_cut_back(&START_KEY(i->k), tmp);
+ bch_cut_front(i->k, top->k);
+ heap_sift(iter, 0, btree_iter_cmp);
+
+ return tmp;
+ } else {
+ bch_cut_back(&START_KEY(i->k), top->k);
+ }
}
}
+
+ return NULL;
}
static void btree_mergesort(struct btree *b, struct bset *out,
@@ -973,15 +986,20 @@ static void btree_mergesort(struct btree *b, struct bset *out,
bool fixup, bool remove_stale)
{
struct bkey *k, *last = NULL;
+ BKEY_PADDED(k) tmp;
bool (*bad)(struct btree *, const struct bkey *) = remove_stale
? bch_ptr_bad
: bch_ptr_invalid;
while (!btree_iter_end(iter)) {
if (fixup && !b->level)
- btree_sort_fixup(iter);
+ k = btree_sort_fixup(iter, &tmp.k);
+ else
+ k = NULL;
+
+ if (!k)
+ k = bch_btree_iter_next(iter);
- k = bch_btree_iter_next(iter);
if (bad(b, k))
continue;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <[email protected]>
commit e20970ada3f699c113fe64b04492af083d11a7d8 upstream.
The driver defines ADAU1701_SEROCTL_WORD_LEN_16 as 0x10 while it should be b10,
so 0x2. This patch fixes it.
Reported-by: Magnus Reftel <[email protected]>
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
sound/soc/codecs/adau1701.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/adau1701.c b/sound/soc/codecs/adau1701.c
index d1124a5..b12e3e7 100644
--- a/sound/soc/codecs/adau1701.c
+++ b/sound/soc/codecs/adau1701.c
@@ -71,7 +71,7 @@
#define ADAU1701_SEROCTL_WORD_LEN_24 0x0000
#define ADAU1701_SEROCTL_WORD_LEN_20 0x0001
-#define ADAU1701_SEROCTL_WORD_LEN_16 0x0010
+#define ADAU1701_SEROCTL_WORD_LEN_16 0x0002
#define ADAU1701_SEROCTL_WORD_LEN_MASK 0x0003
#define ADAU1701_AUXNPOW_VBPD 0x40
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= <[email protected]>
commit 56492e0fac2dbaf7735ffd66b206a90624917789 upstream.
This fixes a bug which was causing rejections of valid GPU commands
from userspace.
Signed-off-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/evergreen_cs.c | 5 ++++-
drivers/gpu/drm/radeon/r600_cs.c | 5 ++++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index eb8ac31..c7cac07 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -967,7 +967,10 @@ static int evergreen_cs_track_check(struct radeon_cs_parser *p)
if (track->cb_dirty) {
tmp = track->cb_target_mask;
for (i = 0; i < 8; i++) {
- if ((tmp >> (i * 4)) & 0xF) {
+ u32 format = G_028C70_FORMAT(track->cb_color_info[i]);
+
+ if (format != V_028C70_COLOR_INVALID &&
+ (tmp >> (i * 4)) & 0xF) {
/* at least one component is enabled */
if (track->cb_color_bo[i] == NULL) {
dev_warn(p->dev, "%s:%d mask 0x%08X | 0x%08X no cb for %d\n",
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 01a3ec8..745e66e 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -749,7 +749,10 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
}
for (i = 0; i < 8; i++) {
- if ((tmp >> (i * 4)) & 0xF) {
+ u32 format = G_0280A0_FORMAT(track->cb_color_info[i]);
+
+ if (format != V_0280A0_COLOR_INVALID &&
+ (tmp >> (i * 4)) & 0xF) {
/* at least one component is enabled */
if (track->cb_color_bo[i] == NULL) {
dev_warn(p->dev, "%s:%d mask 0x%08X | 0x%08X no cb for %d\n",
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Thornber <[email protected]>
commit 12c91a5c2d2a8e8cc40a9552313e1e7b0a2d9ee3 upstream.
When extending a low level space map we should update nr_blocks at
the start so the new space is used for the index entries.
Otherwise extend can fail, e.g.: sm_metadata_extend call sequence
that fails:
-> sm_ll_extend
-> dm_tm_new_block -> dm_sm_new_block -> sm_bootstrap_new_block
=> returns -ENOSPC because smm->begin == smm->ll.nr_blocks
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/persistent-data/dm-space-map-common.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
index 3e7a88d..0d24037 100644
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -245,6 +245,10 @@ int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks)
return -EINVAL;
}
+ /*
+ * We need to set this before the dm_tm_new_block() call below.
+ */
+ ll->nr_blocks = nr_blocks;
for (i = old_blocks; i < blocks; i++) {
struct dm_block *b;
struct disk_index_entry idx;
@@ -252,6 +256,7 @@ int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks)
r = dm_tm_new_block(ll->tm, &dm_sm_bitmap_validator, &b);
if (r < 0)
return r;
+
idx.blocknr = cpu_to_le64(dm_block_location(b));
r = dm_tm_unlock(ll->tm, b);
@@ -266,7 +271,6 @@ int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks)
return r;
}
- ll->nr_blocks = nr_blocks;
return 0;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Thornber <[email protected]>
commit 7e664b3dec431eebf0c5df5ff704d6197634cf35 upstream.
When extending a metadata space map we should do the first commit whilst
still in bootstrap mode -- a mode where all blocks get allocated in the
new area.
That way the commit overhead is allocated from the newly added space.
Otherwise we risk running out of space.
With this fix, and the previous commit "dm space map common: make sure
new space is used during extend", the following device mapper testsuite
test passes:
dmtest run --suite thin-provisioning -n /resize_metadata_no_io/
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/persistent-data/dm-space-map-metadata.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c
index 58fc1ee..f04d92f 100644
--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -608,20 +608,28 @@ static int sm_metadata_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
* Flick into a mode where all blocks get allocated in the new area.
*/
smm->begin = old_len;
- memcpy(&smm->sm, &bootstrap_ops, sizeof(smm->sm));
+ memcpy(sm, &bootstrap_ops, sizeof(*sm));
/*
* Extend.
*/
r = sm_ll_extend(&smm->ll, extra_blocks);
+ if (r)
+ goto out;
+
+ for (i = old_len; !r && i < smm->begin; i++) {
+ r = sm_ll_inc(&smm->ll, i, &ev);
+ if (r)
+ goto out;
+ }
+ r = sm_metadata_commit(sm);
+
+out:
/*
* Switch back to normal behaviour.
*/
- memcpy(&smm->sm, &ops, sizeof(smm->sm));
- for (i = old_len; !r && i < smm->begin; i++)
- r = sm_ll_inc(&smm->ll, i, &ev);
-
+ memcpy(sm, &ops, sizeof(*sm));
return r;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit be35f486108227e10fe5d96fd42fb2b344c59983 upstream.
There may be other parts of the kernel holding a reference on the dm
kobject. We must wait until all references are dropped before
deallocating the mapped_device structure.
The dm_kobject_release method signals that all references are dropped
via completion. But dm_kobject_release doesn't free the kobject (which
is embedded in the mapped_device structure).
This is the sequence of operations:
* when destroying a DM device, call kobject_put from dm_sysfs_exit
* wait until all users stop using the kobject, when it happens the
release method is called
* the release method signals the completion and should return without
delay
* the dm device removal code that waits on the completion continues
* the dm device removal code drops the dm_mod reference the device had
* the dm device removal code frees the mapped_device structure that
contains the kobject
Using kobject this way should avoid the module unload race that was
mentioned at the beginning of this thread:
https://lkml.org/lkml/2014/1/4/83
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-sysfs.c | 10 +++++++++-
drivers/md/dm.c | 11 +++++++++++
drivers/md/dm.h | 2 ++
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c
index 84d2b91..e0cc5d6 100644
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -79,6 +79,11 @@ static const struct sysfs_ops dm_sysfs_ops = {
.show = dm_attr_show,
};
+static void dm_kobject_release(struct kobject *kobj)
+{
+ complete(dm_get_completion_from_kobject(kobj));
+}
+
/*
* dm kobject is embedded in mapped_device structure
* no need to define release function here
@@ -86,6 +91,7 @@ static const struct sysfs_ops dm_sysfs_ops = {
static struct kobj_type dm_ktype = {
.sysfs_ops = &dm_sysfs_ops,
.default_attrs = dm_attrs,
+ .release = dm_kobject_release,
};
/*
@@ -104,5 +110,7 @@ int dm_sysfs_init(struct mapped_device *md)
*/
void dm_sysfs_exit(struct mapped_device *md)
{
- kobject_put(dm_kobject(md));
+ struct kobject *kobj = dm_kobject(md);
+ kobject_put(kobj);
+ wait_for_completion(dm_get_completion_from_kobject(kobj));
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 995e1fc..0cc1449 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -196,6 +196,9 @@ struct mapped_device {
/* sysfs handle */
struct kobject kobj;
+ /* wait until the kobject is released */
+ struct completion kobj_completion;
+
/* zero-length flush that will be cloned and submitted to targets */
struct bio flush_bio;
};
@@ -1936,6 +1939,7 @@ static struct mapped_device *alloc_dev(int minor)
init_waitqueue_head(&md->wait);
INIT_WORK(&md->work, dm_wq_work);
init_waitqueue_head(&md->eventq);
+ init_completion(&md->kobj_completion);
md->disk->major = _major;
md->disk->first_minor = minor;
@@ -2784,6 +2788,13 @@ struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
return md;
}
+struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
+{
+ struct mapped_device *md = container_of(kobj, struct mapped_device, kobj);
+
+ return &md->kobj_completion;
+}
+
int dm_suspended_md(struct mapped_device *md)
{
return test_bit(DMF_SUSPENDED, &md->flags);
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 45b97da..66cfb7d 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
+#include <linux/completion.h>
/*
* Suspend feature flags
@@ -129,6 +130,7 @@ int dm_sysfs_init(struct mapped_device *md);
void dm_sysfs_exit(struct mapped_device *md);
struct kobject *dm_kobject(struct mapped_device *md);
struct mapped_device *dm_get_from_kobject(struct kobject *kobj);
+struct completion *dm_get_completion_from_kobject(struct kobject *kobj);
/*
* Targets for linear and striped mappings
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Warren <[email protected]>
commit 3685f19e07802ec4207b52465c408f185b66490e upstream.
Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have
their MODEM-control signals tied off to a static state. However UARTs A
and B can optionally route those signals to/from package pins, depending
on the exact pinmux configuration.
When these signals are not routed to package pins, false interrupts may
trigger either temporarily, or permanently, all while not showing up in
the IIR; it will read as NO_INT. This will eventually lead to the UART
IRQ being disabled due to unhandled interrupts. When this happens, the
kernel may print e.g.:
irq 68: nobody cared (try booting with the "irqpoll" option)
In order to prevent this, enable UART_BUG_NOMSR. This prevents
UART_IER_MSI from being enabled, which prevents the false interrupts
from triggering.
In practice, this is not needed under any of the following conditions:
* On Tegra chips after Tegra30, since the HW bug has apparently been
fixed.
* On UARTs C..E since their MODEM control signals are tied to the correct
static state which doesn't trigger the issue.
* On UARTs A..B if the MODEM control signals are routed out to package
pins, since they will then carry valid signals.
However, we ignore these exceptions for now, since they are only relevant
if a board actually hooks up more than a 4-wire UART, and no currently
supported board does this. If we ever support a board that does, we can
refine the algorithm that enables UART_BUG_NOMSR to take those exceptions
into account, and/or read a flag from DT/... that indicates that the
board has hooked up and pinmux'd more than a 4-wire UART.
Reported-by: Olof Johansson <[email protected]> # autotester
Signed-off-by: Stephen Warren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/tty/serial/8250/8250_core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 86c00b1c..d28d7af 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2670,6 +2670,10 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (port->type == PORT_16550A && port->iotype == UPIO_AU)
up->bugs |= UART_BUG_NOMSR;
+ /* HW bugs may trigger IRQ while IIR == NO_INT */
+ if (port->type == PORT_TEGRA)
+ up->bugs |= UART_BUG_NOMSR;
+
if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit d195178297de9a91246519dbfa98952b70f9a9b6 upstream.
The hw i2c engines are disabled by default as the
current implementation is still experimental. Print
a warning when users enable it so that it's obvious
when the option is enabled.
v2: check for non-0 rather than 1
Signed-off-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/radeon/radeon_i2c.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index fc60b74..e24ca6a 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -1020,6 +1020,9 @@ void radeon_i2c_destroy(struct radeon_i2c_chan *i2c)
/* Add the default buses */
void radeon_i2c_init(struct radeon_device *rdev)
{
+ if (radeon_hw_i2c)
+ DRM_INFO("hw_i2c forced on, you may experience display detection problems!\n");
+
if (rdev->is_atom_bios)
radeon_atombios_i2c_init(rdev);
else
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Colin Leitner <[email protected]>
commit c1f15196ac3b541d084dc80a8fbd8a74c6a0bd44 upstream.
Genuine FTDI chips support only CS7/8. A previous fix in commit
8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE
setting") enforced this limitation and reported it back to userspace.
However, certain types of smartcard readers depend on specific
driver behaviour that requests 0 data bits (not 5) to change into a
different operating mode if CS5 has been set.
This patch reenables this behaviour for all FTDI devices.
Tagged to be added to stable, because it affects a lot of users of
embedded systems which rely on these readers to work properly.
Reported-by: Heinrich Siebmanns <[email protected]>
Tested-by: Heinrich Siebmanns <[email protected]>
Signed-off-by: Colin Leitner <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/ftdi_sio.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 92549cc..089248c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2132,10 +2132,20 @@ static void ftdi_set_termios(struct tty_struct *tty,
}
/*
- * All FTDI UART chips are limited to CS7/8. We won't pretend to
+ * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to
* support CS5/6 and revert the CSIZE setting instead.
+ *
+ * CS5 however is used to control some smartcard readers which abuse
+ * this limitation to switch modes. Original FTDI chips fall back to
+ * eight data bits.
+ *
+ * TODO: Implement a quirk to only allow this with mentioned
+ * readers. One I know of (Argolis Smartreader V1)
+ * returns "USB smartcard server" as iInterface string.
+ * The vendor didn't bother with a custom VID/PID of
+ * course.
*/
- if ((C_CSIZE(tty) != CS8) && (C_CSIZE(tty) != CS7)) {
+ if (C_CSIZE(tty) == CS6) {
dev_warn(ddev, "requested CSIZE setting not supported\n");
termios->c_cflag &= ~CSIZE;
@@ -2182,6 +2192,9 @@ no_skip:
urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
}
switch (cflag & CSIZE) {
+ case CS5:
+ dev_dbg(ddev, "Setting CS5 quirk\n");
+ break;
case CS7:
urb_value |= 7;
dev_dbg(ddev, "Setting CS7\n");
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Tetsuo Handa <[email protected]>
commit 8ed814602876bec9bad2649ca17f34b499357a1c upstream.
Hello.
I got below leak with linux-3.10.0-54.0.1.el7.x86_64 .
[ 681.903890] kmemleak: 5538 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
Below is a patch, but I don't know whether we need special handing for undoing
ebitmap_set_bit() call.
----------
>>From fe97527a90fe95e2239dfbaa7558f0ed559c0992 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <[email protected]>
Date: Mon, 6 Jan 2014 16:30:21 +0900
Subject: [PATCH] SELinux: Fix memory leak upon loading policy
Commit 2463c26d "SELinux: put name based create rules in a hashtable" did not
check return value from hashtab_insert() in filename_trans_read(). It leaks
memory if hashtab_insert() returns error.
unreferenced object 0xffff88005c9160d0 (size 8):
comm "systemd", pid 1, jiffies 4294688674 (age 235.265s)
hex dump (first 8 bytes):
57 0b 00 00 6b 6b 6b a5 W...kkk.
backtrace:
[<ffffffff816604ae>] kmemleak_alloc+0x4e/0xb0
[<ffffffff811cba5e>] kmem_cache_alloc_trace+0x12e/0x360
[<ffffffff812aec5d>] policydb_read+0xd1d/0xf70
[<ffffffff812b345c>] security_load_policy+0x6c/0x500
[<ffffffff812a623c>] sel_write_load+0xac/0x750
[<ffffffff811eb680>] vfs_write+0xc0/0x1f0
[<ffffffff811ec08c>] SyS_write+0x4c/0xa0
[<ffffffff81690419>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
However, we should not return EEXIST error to the caller, or the systemd will
show below message and the boot sequence freezes.
systemd[1]: Failed to load SELinux policy. Freezing.
Signed-off-by: Tetsuo Handa <[email protected]>
Acked-by: Eric Paris <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
security/selinux/ss/policydb.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index c8adde3..7e5bced 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -1941,7 +1941,19 @@ static int filename_trans_read(struct policydb *p, void *fp)
if (rc)
goto out;
- hashtab_insert(p->filename_trans, ft, otype);
+ rc = hashtab_insert(p->filename_trans, ft, otype);
+ if (rc) {
+ /*
+ * Do not return -EEXIST to the caller, or the system
+ * will not boot.
+ */
+ if (rc != -EEXIST)
+ goto out;
+ /* But free memory to avoid memory leak. */
+ kfree(ft);
+ kfree(name);
+ kfree(otype);
+ }
}
hash_eval(p->filename_trans, "filenametr");
return 0;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit 09c455aaa8f47a94d5bafaa23d58365768210507 upstream.
A missing cast means that when we are truncating a file which is less
than 60 bytes, we don't clear the correct area of memory, and in fact
we can end up truncating the next inode in the inode table, or worse
yet, some other kernel data structure.
Addresses-Coverity-Id: #751987
Signed-off-by: "Theodore Ts'o" <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/ext4/inline.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index d9ecbf1..46b3668 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -1925,9 +1925,11 @@ void ext4_inline_data_truncate(struct inode *inode, int *has_inline)
}
/* Clear the content within i_blocks. */
- if (i_size < EXT4_MIN_INLINE_DATA_SIZE)
- memset(ext4_raw_inode(&is.iloc)->i_block + i_size, 0,
- EXT4_MIN_INLINE_DATA_SIZE - i_size);
+ if (i_size < EXT4_MIN_INLINE_DATA_SIZE) {
+ void *p = (void *) ext4_raw_inode(&is.iloc)->i_block;
+ memset(p + i_size, 0,
+ EXT4_MIN_INLINE_DATA_SIZE - i_size);
+ }
EXT4_I(inode)->i_inline_size = i_size <
EXT4_MIN_INLINE_DATA_SIZE ?
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 543d7784b07ffd16cc82a9cb4e1e0323fd0040f1 upstream.
There is a race in the hub driver between hub_disconnect() and
recursively_mark_NOTATTACHED(). This race can be triggered if the
driver is unbound from a device at the same time as the bus's root hub
is removed. When the race occurs, it can cause an oops:
BUG: unable to handle kernel NULL pointer dereference at 0000015c
IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60
Call Trace:
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d6082>] usb_set_device_state+0x92/0x120
[<c16d862b>] usb_disconnect+0x2b/0x1a0
[<c16dd4c0>] usb_remove_hcd+0xb0/0x160
[<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
[<c1704efc>] ehci_mid_remove+0x1c/0x30
[<c1704f26>] ehci_mid_stop_host+0x16/0x30
[<c16f7698>] penwell_otg_work+0xd28/0x3520
[<c19c945b>] ? __schedule+0x39b/0x7f0
[<c19cdb9d>] ? sub_preempt_count+0x3d/0x50
[<c125e97d>] process_one_work+0x11d/0x3d0
[<c19c7f4d>] ? mutex_unlock+0xd/0x10
[<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270
[<c125f009>] worker_thread+0xf9/0x320
[<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
[<c125ef10>] ? rescuer_thread+0x2b0/0x2b0
[<c1264ac4>] kthread+0x94/0xa0
[<c19d0f77>] ret_from_kernel_thread+0x1b/0x28
[<c1264a30>] ? kthread_create_on_node+0xc0/0xc0
One problem is that recursively_mark_NOTATTACHED() uses the intfdata
value and hub->hdev->maxchild while hub_disconnect() is clearing them.
Another problem is that it uses hub->ports[i] while the port device is
being released.
To fix this race, we need to hold the device_state_lock while
hub_disconnect() changes the values. (Note that usb_disconnect()
and hub_port_connect_change() already acquire this lock at similar
critical times during a USB device's life cycle.) We also need to
remove the port devices after maxchild has been set to 0, instead of
before.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: "Du, Changbin" <[email protected]>
Tested-by: "Du, Changbin" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/core/hub.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8bbe1b8..8b8eec8 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1605,7 +1605,7 @@ static void hub_disconnect(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata(intf);
struct usb_device *hdev = interface_to_usbdev(intf);
- int i;
+ int port1;
/* Take the hub off the event list and don't let it be added again */
spin_lock_irq(&hub_event_lock);
@@ -1620,11 +1620,15 @@ static void hub_disconnect(struct usb_interface *intf)
hub->error = 0;
hub_quiesce(hub, HUB_DISCONNECT);
- usb_set_intfdata (intf, NULL);
+ /* Avoid races with recursively_mark_NOTATTACHED() */
+ spin_lock_irq(&device_state_lock);
+ port1 = hdev->maxchild;
+ hdev->maxchild = 0;
+ usb_set_intfdata(intf, NULL);
+ spin_unlock_irq(&device_state_lock);
- for (i = 0; i < hdev->maxchild; i++)
- usb_hub_remove_port_device(hub, i + 1);
- hub->hdev->maxchild = 0;
+ for (; port1 > 0; --port1)
+ usb_hub_remove_port_device(hub, port1);
if (hub->hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Thornber <[email protected]>
commit 19fa1a6756ed9e92daa9537c03b47d6b55cc2316 upstream.
If a snapshot is created and later deleted the origin dm_thin_device's
snapshotted_time will have been updated to reflect the snapshot's
creation time. The 'shared' flag in the dm_thin_lookup_result struct
returned from dm_thin_find_block() is an approximation based on
snapshotted_time -- this is done to avoid 0(n), or worse, time
complexity. In this case, the shared flag would be true.
But because the 'shared' flag reflects an approximation a block can be
incorrectly assumed to be shared (e.g. false positive for 'shared'
because the snapshot no longer exists). This could result in discards
issued to a thin device not being passed down to the pool's underlying
data device.
To fix this we double check that a thin block is really still in-use
after a mapping is removed using dm_pool_block_is_used(). If the
reference count for a block is now zero the discard is allowed to be
passed down.
Also add a 'definitely_not_shared' member to the dm_thin_new_mapping
structure -- reflects that the 'shared' flag in the response from
dm_thin_find_block() can only be held as definitive if false is
returned.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1043527
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-thin-metadata.c | 20 ++++++++++++++++++++
drivers/md/dm-thin-metadata.h | 2 ++
drivers/md/dm-thin.c | 14 ++++++++++++--
3 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c
index 8a30ad5..7da3476 100644
--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -1349,6 +1349,12 @@ dm_thin_id dm_thin_dev_id(struct dm_thin_device *td)
return td->id;
}
+/*
+ * Check whether @time (of block creation) is older than @td's last snapshot.
+ * If so then the associated block is shared with the last snapshot device.
+ * Any block on a device created *after* the device last got snapshotted is
+ * necessarily not shared.
+ */
static bool __snapshotted_since(struct dm_thin_device *td, uint32_t time)
{
return td->snapshotted_time > time;
@@ -1458,6 +1464,20 @@ int dm_thin_remove_block(struct dm_thin_device *td, dm_block_t block)
return r;
}
+int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result)
+{
+ int r;
+ uint32_t ref_count;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_count(pmd->data_sm, b, &ref_count);
+ if (!r)
+ *result = (ref_count != 0);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
bool dm_thin_changed_this_transaction(struct dm_thin_device *td)
{
int r;
diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h
index 7bcc0e1..2edf5db 100644
--- a/drivers/md/dm-thin-metadata.h
+++ b/drivers/md/dm-thin-metadata.h
@@ -181,6 +181,8 @@ int dm_pool_get_data_block_size(struct dm_pool_metadata *pmd, sector_t *result);
int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result);
+int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result);
+
/*
* Returns -ENOSPC if the new size is too small and already allocated
* blocks would be lost.
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 754026b..18a9b12 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -512,6 +512,7 @@ struct dm_thin_new_mapping {
unsigned quiesced:1;
unsigned prepared:1;
unsigned pass_discard:1;
+ unsigned definitely_not_shared:1;
struct thin_c *tc;
dm_block_t virt_block;
@@ -683,7 +684,15 @@ static void process_prepared_discard_passdown(struct dm_thin_new_mapping *m)
cell_defer_no_holder(tc, m->cell2);
if (m->pass_discard)
- remap_and_issue(tc, m->bio, m->data_block);
+ if (m->definitely_not_shared)
+ remap_and_issue(tc, m->bio, m->data_block);
+ else {
+ bool used = false;
+ if (dm_pool_block_is_used(tc->pool->pmd, m->data_block, &used) || used)
+ bio_endio(m->bio, 0);
+ else
+ remap_and_issue(tc, m->bio, m->data_block);
+ }
else
bio_endio(m->bio, 0);
@@ -1030,7 +1039,8 @@ static void process_discard(struct thin_c *tc, struct bio *bio)
*/
m = get_next_mapping(pool);
m->tc = tc;
- m->pass_discard = (!lookup_result.shared) && pool->pf.discard_passdown;
+ m->pass_discard = pool->pf.discard_passdown;
+ m->definitely_not_shared = !lookup_result.shared;
m->virt_block = block;
m->data_block = lookup_result.block;
m->cell = cell;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 304d695c3dc8eb65206b9eaf16f8d1a41510d1cf upstream.
In very rare cases (such as a memory failure stress test) it is possible
to fill the entire ring without emitting a request. Under this
circumstance, the outstanding request is flushed and waited upon. After
space on the ring is cleared, we return to emitting the new command -
except that we just cleared the seqno allocated for this operation and
trigger the sanity check that a request is only ever emitted with a
valid seqno. The fix is to rearrange the code to make sure the
allocation of the seqno for this operation is after any required flushes
of outstanding operations.
The bug exists since the preallocation was introduced in
commit 9d7730914f4cd496e356acfab95b41075aa8eae8
Author: Chris Wilson <[email protected]>
Date: Tue Nov 27 16:22:52 2012 +0000
drm/i915: Preallocate next seqno before touching the ring
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/intel_ringbuffer.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 079ef01..9e171c2 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1557,8 +1557,8 @@ intel_ring_alloc_seqno(struct intel_ring_buffer *ring)
return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
}
-static int __intel_ring_begin(struct intel_ring_buffer *ring,
- int bytes)
+static int __intel_ring_prepare(struct intel_ring_buffer *ring,
+ int bytes)
{
int ret;
@@ -1574,7 +1574,6 @@ static int __intel_ring_begin(struct intel_ring_buffer *ring,
return ret;
}
- ring->space -= bytes;
return 0;
}
@@ -1589,12 +1588,17 @@ int intel_ring_begin(struct intel_ring_buffer *ring,
if (ret)
return ret;
+ ret = __intel_ring_prepare(ring, num_dwords * sizeof(uint32_t));
+ if (ret)
+ return ret;
+
/* Preallocate the olr before touching the ring */
ret = intel_ring_alloc_seqno(ring);
if (ret)
return ret;
- return __intel_ring_begin(ring, num_dwords * sizeof(uint32_t));
+ ring->space -= num_dwords * sizeof(uint32_t);
+ return 0;
}
void intel_ring_init_seqno(struct intel_ring_buffer *ring, u32 seqno)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley <[email protected]>
commit dd4491dfb9eb4fa3bfa7dc73ba989e69fbce2e10 upstream.
Current setting of symbol rate is not very actuate causing
loss of lock.
Covert temp to u64 and use mclk to calculate from big number.
Calculate symbol rate by dividing symbol rate by 1000 times
1 << 24 and dividing sum by mclk.
Add other symbol rate settings to function registers 0xa0-0xa3.
In set_frontend add changes to register 0xf1 this must be done
prior call to fe_reset. Register 0x00 doesn't need a second
write of 0x1
Applied after patch
m88rs2000: add m88rs2000_set_carrieroffset
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb-frontends/m88rs2000.c | 42 ++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 11 deletions(-)
diff --git a/drivers/media/dvb-frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c
index 8091653..02699c1 100644
--- a/drivers/media/dvb-frontends/m88rs2000.c
+++ b/drivers/media/dvb-frontends/m88rs2000.c
@@ -160,24 +160,44 @@ static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate)
{
struct m88rs2000_state *state = fe->demodulator_priv;
int ret;
- u32 temp;
+ u64 temp;
+ u32 mclk;
u8 b[3];
if ((srate < 1000000) || (srate > 45000000))
return -EINVAL;
+ mclk = m88rs2000_get_mclk(fe);
+ if (!mclk)
+ return -EINVAL;
+
temp = srate / 1000;
- temp *= 11831;
- temp /= 68;
- temp -= 3;
+ temp *= 1 << 24;
+
+ do_div(temp, mclk);
b[0] = (u8) (temp >> 16) & 0xff;
b[1] = (u8) (temp >> 8) & 0xff;
b[2] = (u8) temp & 0xff;
+
ret = m88rs2000_writereg(state, 0x93, b[2]);
ret |= m88rs2000_writereg(state, 0x94, b[1]);
ret |= m88rs2000_writereg(state, 0x95, b[0]);
+ if (srate > 10000000)
+ ret |= m88rs2000_writereg(state, 0xa0, 0x20);
+ else
+ ret |= m88rs2000_writereg(state, 0xa0, 0x60);
+
+ ret |= m88rs2000_writereg(state, 0xa1, 0xe0);
+
+ if (srate > 12000000)
+ ret |= m88rs2000_writereg(state, 0xa3, 0x20);
+ else if (srate > 2800000)
+ ret |= m88rs2000_writereg(state, 0xa3, 0x98);
+ else
+ ret |= m88rs2000_writereg(state, 0xa3, 0x90);
+
deb_info("m88rs2000: m88rs2000_set_symbolrate\n");
return ret;
}
@@ -307,8 +327,6 @@ struct inittab m88rs2000_shutdown[] = {
struct inittab fe_reset[] = {
{DEMOD_WRITE, 0x00, 0x01},
- {DEMOD_WRITE, 0xf1, 0xbf},
- {DEMOD_WRITE, 0x00, 0x01},
{DEMOD_WRITE, 0x20, 0x81},
{DEMOD_WRITE, 0x21, 0x80},
{DEMOD_WRITE, 0x10, 0x33},
@@ -351,9 +369,6 @@ struct inittab fe_trigger[] = {
{DEMOD_WRITE, 0x9b, 0x64},
{DEMOD_WRITE, 0x9e, 0x00},
{DEMOD_WRITE, 0x9f, 0xf8},
- {DEMOD_WRITE, 0xa0, 0x20},
- {DEMOD_WRITE, 0xa1, 0xe0},
- {DEMOD_WRITE, 0xa3, 0x38},
{DEMOD_WRITE, 0x98, 0xff},
{DEMOD_WRITE, 0xc0, 0x0f},
{DEMOD_WRITE, 0x89, 0x01},
@@ -625,8 +640,13 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe)
if (ret < 0)
return -ENODEV;
- /* Reset Demod */
- ret = m88rs2000_tab_set(state, fe_reset);
+ /* Reset demod by symbol rate */
+ if (c->symbol_rate > 27500000)
+ ret = m88rs2000_writereg(state, 0xf1, 0xa4);
+ else
+ ret = m88rs2000_writereg(state, 0xf1, 0xbf);
+
+ ret |= m88rs2000_tab_set(state, fe_reset);
if (ret < 0)
return -ENODEV;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley <[email protected]>
commit 06af15d1b6f45c60358feab88004472e5428f01c upstream.
Set the carrier offset correctly using the default mclk values.
Add function m88rs2000_get_mclk to calculate the mclk value
against crystal frequency which will later be used for
other functions.
Add function m88rs2000_set_carrieroffset to calculate
and set the offset value.
variable offset becomes a signed value.
Register 0x86 is set the appropriate value according to
remainder value of frequency % 192857 calculation as
shown.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb-frontends/m88rs2000.c | 77 ++++++++++++++++++++++++---------
drivers/media/dvb-frontends/m88rs2000.h | 2 +
2 files changed, 59 insertions(+), 20 deletions(-)
diff --git a/drivers/media/dvb-frontends/m88rs2000.c b/drivers/media/dvb-frontends/m88rs2000.c
index 4da5272..8091653 100644
--- a/drivers/media/dvb-frontends/m88rs2000.c
+++ b/drivers/media/dvb-frontends/m88rs2000.c
@@ -110,6 +110,52 @@ static u8 m88rs2000_readreg(struct m88rs2000_state *state, u8 reg)
return b1[0];
}
+static u32 m88rs2000_get_mclk(struct dvb_frontend *fe)
+{
+ struct m88rs2000_state *state = fe->demodulator_priv;
+ u32 mclk;
+ u8 reg;
+ /* Must not be 0x00 or 0xff */
+ reg = m88rs2000_readreg(state, 0x86);
+ if (!reg || reg == 0xff)
+ return 0;
+
+ reg /= 2;
+ reg += 1;
+
+ mclk = (u32)(reg * RS2000_FE_CRYSTAL_KHZ + 28 / 2) / 28;
+
+ return mclk;
+}
+
+static int m88rs2000_set_carrieroffset(struct dvb_frontend *fe, s16 offset)
+{
+ struct m88rs2000_state *state = fe->demodulator_priv;
+ u32 mclk;
+ s32 tmp;
+ u8 reg;
+ int ret;
+
+ mclk = m88rs2000_get_mclk(fe);
+ if (!mclk)
+ return -EINVAL;
+
+ tmp = (offset * 4096 + (s32)mclk / 2) / (s32)mclk;
+ if (tmp < 0)
+ tmp += 4096;
+
+ /* Carrier Offset */
+ ret = m88rs2000_writereg(state, 0x9c, (u8)(tmp >> 4));
+
+ reg = m88rs2000_readreg(state, 0x9d);
+ reg &= 0xf;
+ reg |= (u8)(tmp & 0xf) << 4;
+
+ ret |= m88rs2000_writereg(state, 0x9d, reg);
+
+ return ret;
+}
+
static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate)
{
struct m88rs2000_state *state = fe->demodulator_priv;
@@ -540,9 +586,8 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe)
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
fe_status_t status;
int i, ret = 0;
- s32 tmp;
u32 tuner_freq;
- u16 offset = 0;
+ s16 offset = 0;
u8 reg;
state->no_lock_count = 0;
@@ -567,26 +612,18 @@ static int m88rs2000_set_frontend(struct dvb_frontend *fe)
if (ret < 0)
return -ENODEV;
- offset = tuner_freq - c->frequency;
+ offset = (s16)((s32)tuner_freq - c->frequency);
- /* calculate offset assuming 96000kHz*/
- tmp = offset;
- tmp *= 65536;
-
- tmp = (2 * tmp + 96000) / (2 * 96000);
- if (tmp < 0)
- tmp += 65536;
-
- offset = tmp & 0xffff;
-
- ret = m88rs2000_writereg(state, 0x9a, 0x30);
- /* Unknown usually 0xc6 sometimes 0xc1 */
- reg = m88rs2000_readreg(state, 0x86);
- ret |= m88rs2000_writereg(state, 0x86, reg);
- /* Offset lower nibble always 0 */
- ret |= m88rs2000_writereg(state, 0x9c, (offset >> 8));
- ret |= m88rs2000_writereg(state, 0x9d, offset & 0xf0);
+ /* default mclk value 96.4285 * 2 * 1000 = 192857 */
+ if (((c->frequency % 192857) >= (192857 - 3000)) ||
+ (c->frequency % 192857) <= 3000)
+ ret = m88rs2000_writereg(state, 0x86, 0xc2);
+ else
+ ret = m88rs2000_writereg(state, 0x86, 0xc6);
+ ret |= m88rs2000_set_carrieroffset(fe, offset);
+ if (ret < 0)
+ return -ENODEV;
/* Reset Demod */
ret = m88rs2000_tab_set(state, fe_reset);
diff --git a/drivers/media/dvb-frontends/m88rs2000.h b/drivers/media/dvb-frontends/m88rs2000.h
index 14ce31e..0a50ea9 100644
--- a/drivers/media/dvb-frontends/m88rs2000.h
+++ b/drivers/media/dvb-frontends/m88rs2000.h
@@ -53,6 +53,8 @@ static inline struct dvb_frontend *m88rs2000_attach(
}
#endif /* CONFIG_DVB_M88RS2000 */
+#define RS2000_FE_CRYSTAL_KHZ 27000
+
enum {
DEMOD_WRITE = 0x1,
WRITE_DELAY = 0x10,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Huewe <[email protected]>
commit 747d35bd9bb4ae6bd74b19baa5bbe32f3e0cee11 upstream.
Depending on the implementation strcmp might return the difference between
two strings not only -1,0,1 consequently
if (strcmp (a,b) == -1)
might lead to taking the wrong branch
-> compare with < 0 instead,
which in any case is more canonical.
Signed-off-by: Peter Huewe <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/char/tpm/tpm_ppi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/char/tpm/tpm_ppi.c b/drivers/char/tpm/tpm_ppi.c
index 57a818b..811ad1e 100644
--- a/drivers/char/tpm/tpm_ppi.c
+++ b/drivers/char/tpm/tpm_ppi.c
@@ -172,7 +172,7 @@ static ssize_t tpm_store_ppi_request(struct device *dev,
* is updated with function index from SUBREQ to SUBREQ2 since PPI
* version 1.1
*/
- if (strcmp(version, "1.1") == -1)
+ if (strcmp(version, "1.1") < 0)
params[2].integer.value = TPM_PPI_FN_SUBREQ;
else
params[2].integer.value = TPM_PPI_FN_SUBREQ2;
@@ -182,7 +182,7 @@ static ssize_t tpm_store_ppi_request(struct device *dev,
* string/package type. For PPI version 1.0 and 1.1, use buffer type
* for compatibility, and use package type since 1.2 according to spec.
*/
- if (strcmp(version, "1.2") == -1) {
+ if (strcmp(version, "1.2") < 0) {
params[3].type = ACPI_TYPE_BUFFER;
params[3].buffer.length = sizeof(req);
sscanf(buf, "%d", &req);
@@ -248,7 +248,7 @@ static ssize_t tpm_show_ppi_transition_action(struct device *dev,
* (e.g. Capella with PPI 1.0) need integer/string/buffer type, so for
* compatibility, define params[3].type as buffer, if PPI version < 1.2
*/
- if (strcmp(version, "1.2") == -1) {
+ if (strcmp(version, "1.2") < 0) {
params[3].type = ACPI_TYPE_BUFFER;
params[3].buffer.length = 0;
params[3].buffer.pointer = NULL;
@@ -390,7 +390,7 @@ static ssize_t show_ppi_operations(char *buf, u32 start, u32 end)
kfree(output.pointer);
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL;
- if (strcmp(version, "1.2") == -1)
+ if (strcmp(version, "1.2") < 0)
return -EPERM;
params[2].integer.value = TPM_PPI_FN_GETOPR;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Layton <[email protected]>
commit 1654a04cd702fd19c297c36300a6ab834cf8c072 upstream.
It doesn't make much sense to make reads from this procfile hang. As
far as I can tell, only gssproxy itself will open this file and it
never reads from it. Change it to just give the present setting of
sn->use_gss_proxy without waiting for anything.
Note that we do not want to call use_gss_proxy() in this codepath
since an inopportune read of this file could cause it to be disabled
prematurely.
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/sunrpc/auth_gss/gss_rpc_upcall.c | 2 --
net/sunrpc/auth_gss/svcauth_gss.c | 33 ++-------------------------------
net/sunrpc/netns.h | 1 -
3 files changed, 2 insertions(+), 34 deletions(-)
diff --git a/net/sunrpc/auth_gss/gss_rpc_upcall.c b/net/sunrpc/auth_gss/gss_rpc_upcall.c
index f1eb0d1..23fa3c1 100644
--- a/net/sunrpc/auth_gss/gss_rpc_upcall.c
+++ b/net/sunrpc/auth_gss/gss_rpc_upcall.c
@@ -137,7 +137,6 @@ void init_gssp_clnt(struct sunrpc_net *sn)
{
mutex_init(&sn->gssp_lock);
sn->gssp_clnt = NULL;
- init_waitqueue_head(&sn->gssp_wq);
}
int set_gssp_clnt(struct net *net)
@@ -154,7 +153,6 @@ int set_gssp_clnt(struct net *net)
sn->gssp_clnt = clnt;
}
mutex_unlock(&sn->gssp_lock);
- wake_up(&sn->gssp_wq);
return ret;
}
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 09fb638..e18be86 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1295,34 +1295,9 @@ static int set_gss_proxy(struct net *net, int type)
else
ret = -EBUSY;
spin_unlock(&use_gssp_lock);
- wake_up(&sn->gssp_wq);
return ret;
}
-static inline bool gssp_ready(struct sunrpc_net *sn)
-{
- switch (sn->use_gss_proxy) {
- case -1:
- return false;
- case 0:
- return true;
- case 1:
- return sn->gssp_clnt;
- }
- WARN_ON_ONCE(1);
- return false;
-}
-
-static int wait_for_gss_proxy(struct net *net, struct file *file)
-{
- struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
-
- if (file->f_flags & O_NONBLOCK && !gssp_ready(sn))
- return -EAGAIN;
- return wait_event_interruptible(sn->gssp_wq, gssp_ready(sn));
-}
-
-
static ssize_t write_gssp(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -1355,16 +1330,12 @@ static ssize_t read_gssp(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct net *net = PDE_DATA(file_inode(file));
+ struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
unsigned long p = *ppos;
char tbuf[10];
size_t len;
- int ret;
-
- ret = wait_for_gss_proxy(net, file);
- if (ret)
- return ret;
- snprintf(tbuf, sizeof(tbuf), "%d\n", use_gss_proxy(net));
+ snprintf(tbuf, sizeof(tbuf), "%d\n", sn->use_gss_proxy);
len = strlen(tbuf);
if (p >= len)
return 0;
diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h
index 779742c..3a260e4 100644
--- a/net/sunrpc/netns.h
+++ b/net/sunrpc/netns.h
@@ -26,7 +26,6 @@ struct sunrpc_net {
unsigned int rpcb_is_af_local : 1;
struct mutex gssp_lock;
- wait_queue_head_t gssp_wq;
struct rpc_clnt *gssp_clnt;
int use_gss_proxy;
int pipe_version;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Huewe <[email protected]>
commit 85c5e0d451125c6ddb78663972e40af810b83644 upstream.
The 'get_burstcount' function can in some circumstances 'return -EBUSY' which
in tpm_stm_i2c_send is stored in an 'u32 burstcnt'
thus converting the signed value into an unsigned value, resulting
in 'burstcnt' being huge.
Changing the type to u32 only does not solve the problem as the signed
value is converted to an unsigned in I2C_WRITE_DATA, resulting in the
same effect.
Thus
-> Change type of burstcnt to u32 (the return type of get_burstcount)
-> Add a check for the return value of 'get_burstcount' and propagate a
potential error.
This makes also sense in the 'I2C_READ_DATA' case, where the there is no
signed/unsigned conversion.
found by coverity
Signed-off-by: Peter Huewe <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/char/tpm/tpm_i2c_stm_st33.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm_i2c_stm_st33.c b/drivers/char/tpm/tpm_i2c_stm_st33.c
index 5bb8e2d..156bd3c 100644
--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ b/drivers/char/tpm/tpm_i2c_stm_st33.c
@@ -410,6 +410,8 @@ static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
&chip->vendor.read_queue)
== 0) {
burstcnt = get_burstcount(chip);
+ if (burstcnt < 0)
+ return burstcnt;
len = min_t(int, burstcnt, count - size);
I2C_READ_DATA(client, TPM_DATA_FIFO, buf + size, len);
size += len;
@@ -451,7 +453,8 @@ static irqreturn_t tpm_ioserirq_handler(int irq, void *dev_id)
static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
size_t len)
{
- u32 status, burstcnt = 0, i, size;
+ u32 status, i, size;
+ int burstcnt = 0;
int ret;
u8 data;
struct i2c_client *client;
@@ -482,6 +485,8 @@ static int tpm_stm_i2c_send(struct tpm_chip *chip, unsigned char *buf,
for (i = 0; i < len - 1;) {
burstcnt = get_burstcount(chip);
+ if (burstcnt < 0)
+ return burstcnt;
size = min_t(int, len - i - 1, burstcnt);
ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size);
if (ret < 0)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Santos <[email protected]>
commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d upstream.
This corrects a problem in spi_pump_messages() that leads to an spi
message hanging forever when a call to transfer_one_message() fails.
This failure occurs in my MCP2210 driver when the cs_change bit is set
on the last transfer in a message, an operation which the hardware does
not support.
Rationale
Since the transfer_one_message() returns an int, we must presume that it
may fail. If transfer_one_message() should never fail, it should return
void. Thus, calls to transfer_one_message() should properly manage a
failure.
Fixes: ffbbdd21329f3 (spi: create a message queueing infrastructure)
Signed-off-by: Daniel Santos <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/spi/spi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 978dda2..96310af 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -584,7 +584,9 @@ static void spi_pump_messages(struct kthread_work *work)
ret = master->transfer_one_message(master, master->cur_msg);
if (ret) {
dev_err(&master->dev,
- "failed to transfer one message from queue\n");
+ "failed to transfer one message from queue: %d\n", ret);
+ master->cur_msg->status = ret;
+ spi_finalize_current_message(master);
return;
}
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikhail Zolotaryov <[email protected]>
commit 0e16114f2db4838251fb64f3b550996ad3585890 upstream.
The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha
Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered
files are corrupted). A similar issue is described here:
http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170
The workaround is (MAX_SECTORS_64):
rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m
The patch adds the tested device to the unusual list permanently.
Signed-off-by: Mikhail Zolotaryov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/storage/unusual_devs.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index de32cfa..ad06255 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -234,6 +234,13 @@ UNUSUAL_DEV( 0x0421, 0x0495, 0x0370, 0x0370,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
+/* Patch submitted by Mikhail Zolotaryov <[email protected]> */
+UNUSUAL_DEV( 0x0421, 0x06aa, 0x1110, 0x1110,
+ "Nokia",
+ "502",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
#ifdef NO_SDDR09
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Weston Andros Adamson <[email protected]>
commit 6ff33b7dd0228b7d7ed44791bbbc98b03fd15d9d upstream.
When a task enters call_refreshresult with status 0 from call_refresh and
!rpcauth_uptodatecred(task) it enters call_refresh again with no rate-limiting
or max number of retries.
Instead of trying forever, make use of the retry path that other errors use.
This only seems to be possible when the crrefresh callback is gss_refresh_null,
which only happens when destroying the context.
To reproduce:
1) mount with sec=krb5 (or sec=sys with krb5 negotiated for non FSID specific
operations).
2) reboot - the client will be stuck and will need to be hard rebooted
BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:46]
Modules linked in: rpcsec_gss_krb5 nfsv4 nfs fscache ppdev crc32c_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd serio_raw i2c_piix4 i2c_core e1000 parport_pc parport shpchp nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd sunrpc autofs4 mptspi scsi_transport_spi mptscsih mptbase ata_generic floppy
irq event stamp: 195724
hardirqs last enabled at (195723): [<ffffffff814a925c>] restore_args+0x0/0x30
hardirqs last disabled at (195724): [<ffffffff814b0a6a>] apic_timer_interrupt+0x6a/0x80
softirqs last enabled at (195722): [<ffffffff8103f583>] __do_softirq+0x1df/0x276
softirqs last disabled at (195717): [<ffffffff8103f852>] irq_exit+0x53/0x9a
CPU: 0 PID: 46 Comm: kworker/0:2 Not tainted 3.13.0-rc3-branch-dros_testing+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
Workqueue: rpciod rpc_async_schedule [sunrpc]
task: ffff8800799c4260 ti: ffff880079002000 task.ti: ffff880079002000
RIP: 0010:[<ffffffffa0064fd4>] [<ffffffffa0064fd4>] __rpc_execute+0x8a/0x362 [sunrpc]
RSP: 0018:ffff880079003d18 EFLAGS: 00000246
RAX: 0000000000000005 RBX: 0000000000000007 RCX: 0000000000000007
RDX: 0000000000000007 RSI: ffff88007aecbae8 RDI: ffff8800783d8900
RBP: ffff880079003d78 R08: ffff88006e30e9f8 R09: ffffffffa005a3d7
R10: ffff88006e30e7b0 R11: ffff8800783d8900 R12: ffffffffa006675e
R13: ffff880079003ce8 R14: ffff88006e30e7b0 R15: ffff8800783d8900
FS: 0000000000000000(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3072333000 CR3: 0000000001a0b000 CR4: 00000000001407f0
Stack:
ffff880079003d98 0000000000000246 0000000000000000 ffff88007a9a4830
ffff880000000000 ffffffff81073f47 ffff88007f212b00 ffff8800799c4260
ffff8800783d8988 ffff88007f212b00 ffffe8ffff604800 0000000000000000
Call Trace:
[<ffffffff81073f47>] ? trace_hardirqs_on_caller+0x145/0x1a1
[<ffffffffa00652d3>] rpc_async_schedule+0x27/0x32 [sunrpc]
[<ffffffff81052974>] process_one_work+0x211/0x3a5
[<ffffffff810528d5>] ? process_one_work+0x172/0x3a5
[<ffffffff81052eeb>] worker_thread+0x134/0x202
[<ffffffff81052db7>] ? rescuer_thread+0x280/0x280
[<ffffffff81052db7>] ? rescuer_thread+0x280/0x280
[<ffffffff810584a0>] kthread+0xc9/0xd1
[<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61
[<ffffffff814afd6c>] ret_from_fork+0x7c/0xb0
[<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61
Code: e8 87 63 fd e0 c6 05 10 dd 01 00 01 48 8b 43 70 4c 8d 6b 70 45 31 e4 a8 02 0f 85 d5 02 00 00 4c 8b 7b 48 48 c7 43 48 00 00 00 00 <4c> 8b 4b 50 4d 85 ff 75 0c 4d 85 c9 4d 89 cf 0f 84 32 01 00 00
And the output of "rpcdebug -m rpc -s all":
RPC: 61 call_refresh (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 call_refreshresult (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 call_refreshresult (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 call_refresh (status 0)
RPC: 61 call_refreshresult (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 call_refreshresult (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 call_refresh (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC: 61 call_refreshresult (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 call_refresh (status 0)
RPC: 61 call_refreshresult (status 0)
RPC: 61 refreshing RPCSEC_GSS cred ffff88007a413cf0
Signed-off-by: Weston Andros Adamson <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/sunrpc/clnt.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index c15fb0f..1974bbe 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1423,9 +1423,13 @@ call_refreshresult(struct rpc_task *task)
task->tk_action = call_refresh;
switch (status) {
case 0:
- if (rpcauth_uptodatecred(task))
+ if (rpcauth_uptodatecred(task)) {
task->tk_action = call_allocate;
- return;
+ return;
+ }
+ /* Use rate-limiting and a max number of retries if refresh
+ * had status 0 but failed to update the cred.
+ */
case -ETIMEDOUT:
rpc_delay(task, 3*HZ);
case -EAGAIN:
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 440ebadeae9298d7de3d4d105342691841ec88d0 upstream.
Fix ring-indicator (RI) status-bit definition, which was defined as CTS,
effectively preventing RI-changes from being detected while reporting
false RI status.
This bug predates git.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/cypress_m8.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index b461311..ce13e61 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -63,7 +63,7 @@
#define UART_DSR 0x20 /* data set ready - flow control - device to host */
#define CONTROL_RTS 0x10 /* request to send - flow control - host to device */
#define UART_CTS 0x10 /* clear to send - flow control - device to host */
-#define UART_RI 0x10 /* ring indicator - modem - device to host */
+#define UART_RI 0x80 /* ring indicator - modem - device to host */
#define UART_CD 0x40 /* carrier detect - modem - device to host */
#define CYP_ERROR 0x08 /* received from input report - device to host */
/* Note - the below has nothing to do with the "feature report" reset */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dongsheng Yang <[email protected]>
commit ad85ace07a05062ef6b59c35a5e80b6eaee1eee6 upstream.
Currently, if we use perf kvm --guestkallsyms --guestmodules report, we
can not get the perf information from perf data file. All sample are
shown as unknown.
Reproducing steps:
# perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.624 MB perf.data.guest (~27260 samples) ]
# perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules report |grep %
100.00% [guest/6471] [unknown] [g] 0xffffffff8164f330
This bug was introduced by 207b57926 (perf kvm: Fix regression with guest machine creation).
In original code, it uses perf_session__find_machine(), it means we deliver symbol to machine
which has the same pid, if no machine found, deliver it to *default* guest. But if we use
perf_session__findnew_machine() here, if no machine was found, new machine with pid will be built
and added. Then the default guest which with pid == 0 will never get a symbol.
And because the new machine initialized here has no kernel map created, the symbol delivered to
it will be marked as "unknown".
This patch here is to revert commit 207b57926 and fix the SEGFAULT bug in another way.
Verification steps:
# ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.651 MB perf.data.guest (~28437 samples) ]
# ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules report |grep %
22.64% :6471 [guest.kernel.kallsyms] [g] update_rq_clock.part.70
19.99% :6471 [guest.kernel.kallsyms] [g] d_free
18.46% :6471 [guest.kernel.kallsyms] [g] bio_phys_segments
16.25% :6471 [guest.kernel.kallsyms] [g] dequeue_task
12.78% :6471 [guest.kernel.kallsyms] [g] __switch_to
7.91% :6471 [guest.kernel.kallsyms] [g] scheduler_tick
1.75% :6471 [guest.kernel.kallsyms] [g] native_apic_mem_write
0.21% :6471 [guest.kernel.kallsyms] [g] apic_timer_interrupt
Signed-off-by: Dongsheng Yang <[email protected]>
Acked-by: David Ahern <[email protected]>
Cc: David Ahern <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
tools/perf/util/session.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index cf1fe01..e392202 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -811,6 +811,7 @@ static struct machine *
union perf_event *event)
{
const u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
+ struct machine *machine;
if (perf_guest &&
((cpumode == PERF_RECORD_MISC_GUEST_KERNEL) ||
@@ -822,7 +823,11 @@ static struct machine *
else
pid = event->ip.pid;
- return perf_session__findnew_machine(session, pid);
+ machine = perf_session__find_machine(session, pid);
+ if (!machine)
+ machine = perf_session__findnew_machine(session,
+ DEFAULT_GUEST_KERNEL_ID);
+ return machine;
}
return &session->machines.host;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Rahul Bedarkar <[email protected]>
commit 7d5c1b9c7cb5ec8e52b1adc65c484a923a8ea6c3 upstream.
Add support for iBall 3.5G connect usb modem.
$lsusb
Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY
$usb-devices
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1c9e ProdID=9605 Rev=00.00
S: Manufacturer=USB Modem
S: Product=USB Modem
S: SerialNumber=1234567890ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Rahul Bedarkar <[email protected]>
Suggested-by: Bjørn Mork <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c44400c..5c86f57 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -320,6 +320,9 @@ static void option_instat_callback(struct urb *urb);
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+/* iBall 3.5G connect wireless modem */
+#define IBALL_3_5G_CONNECT 0x9605
+
/* Zoom */
#define ZOOM_PRODUCT_4597 0x9607
@@ -1500,6 +1503,7 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
/* Pirelli */
{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Yegor Yefremov <[email protected]>
commit 48c0247d7b7bf58abb85a39021099529df365c4d upstream.
Signed-off-by: Yegor Yefremov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 1431e0a..8d3c0b5 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1545,6 +1545,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_TITAN_800E 0xA014
#define PCI_DEVICE_ID_TITAN_200EI 0xA016
#define PCI_DEVICE_ID_TITAN_200EISI 0xA017
+#define PCI_DEVICE_ID_TITAN_200V3 0xA306
#define PCI_DEVICE_ID_TITAN_400V3 0xA310
#define PCI_DEVICE_ID_TITAN_410V3 0xA312
#define PCI_DEVICE_ID_TITAN_800V3 0xA314
@@ -4139,6 +4140,9 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi_2_4000000 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 },
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Zefan <[email protected]>
commit 8afb1474db4701d1ab80cd8251137a3260e6913e upstream.
/sys/kernel/slab/:t-0000048 # cat cpu_slabs
231 N0=16 N1=215
/sys/kernel/slab/:t-0000048 # cat slabs
145 N0=36 N1=109
See, the number of slabs is smaller than that of cpu slabs.
The bug was introduced by commit 49e2258586b423684f03c278149ab46d8f8b6700
("slub: per cpu cache for partial pages").
We should use page->pages instead of page->pobjects when calculating
the number of cpu partial slabs. This also fixes the mapping of slabs
and nodes.
As there's no variable storing the number of total/active objects in
cpu partial slabs, and we don't have user interfaces requiring those
statistics, I just add WARN_ON for those cases.
Acked-by: Christoph Lameter <[email protected]>
Reviewed-by: Wanpeng Li <[email protected]>
Signed-off-by: Li Zefan <[email protected]>
Signed-off-by: Pekka Enberg <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
mm/slub.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/mm/slub.c b/mm/slub.c
index 71ad7c9..fef48ae 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -4300,7 +4300,13 @@ static ssize_t show_slab_objects(struct kmem_cache *s,
page = ACCESS_ONCE(c->partial);
if (page) {
- x = page->pobjects;
+ node = page_to_nid(page);
+ if (flags & SO_TOTAL)
+ WARN_ON_ONCE(1);
+ else if (flags & SO_OBJECTS)
+ WARN_ON_ONCE(1);
+ else
+ x = page->pages;
total += x;
nodes[node] += x;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Grzeschik <[email protected]>
commit 0566477762f9e174e97af347ee9c865f908a5647 upstream.
The ecc_stats.corrected count variable will already be incremented in
the above framework-layer just after this callback.
Signed-off-by: Michael Grzeschik <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/mtd/nand/mxc_nand.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 07e5784..9896b63 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -676,7 +676,6 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
ecc_stat >>= 4;
} while (--no_subpages);
- mtd->ecc_stats.corrected += ret;
pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
return ret;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Young <[email protected]>
commit a7f84f03f660d93574ac88835d056c0d6468aebe upstream.
Current code check boot service region with kernel text region by:
start+size >= __pa_symbol(_text)
The end of the above region should be start + size - 1 instead.
I see this problem in ovmf + Fedora 19 grub boot:
text start: 1000000 md start: 800000 md size: 800000
Signed-off-by: Dave Young <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Acked-by: Toshi Kani <[email protected]>
Tested-by: Toshi Kani <[email protected]>
Signed-off-by: Matt Fleming <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/platform/efi/efi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 220fa52..f19284d 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -440,7 +440,7 @@ void __init efi_reserve_boot_services(void)
* - Not within any part of the kernel
* - Not the bios reserved area
*/
- if ((start+size >= __pa_symbol(_text)
+ if ((start + size > __pa_symbol(_text)
&& start <= __pa_symbol(_end)) ||
!e820_all_mapped(start, start+size, E820_RAM) ||
memblock_is_region_reserved(start, size)) {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonathan Woithe <[email protected]>
commit 9c5320f8d7d9a2cf623e65d50e1113f34d9b9eb1 upstream.
Fix the initialisation of older Quatech serial cards which are fitted with
the AMCC PCI Matchmaker interface chip.
Signed-off-by: Jonathan Woithe ([email protected])
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/tty/serial/8250/8250_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c52948b..1431e0a 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1260,10 +1260,10 @@ static int pci_quatech_init(struct pci_dev *dev)
unsigned long base = pci_resource_start(dev, 0);
if (base) {
u32 tmp;
- outl(inl(base + 0x38), base + 0x38);
+ outl(inl(base + 0x38) | 0x00002000, base + 0x38);
tmp = inl(base + 0x3c);
outl(tmp | 0x01000000, base + 0x3c);
- outl(tmp, base + 0x3c);
+ outl(tmp &= ~0x01000000, base + 0x3c);
}
}
return 0;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Pham <[email protected]>
commit 9005355af23856c55a5538c9024355785424821b upstream.
If CONFIG_PCI is enabled, make sure xhci_cleanup_msix()
doesn't try to free a bogus PCI IRQ or dereference an invalid
pci_dev when the xHCI device is actually a platform_device.
This patch should be backported to kernels as old as 3.9, that
contain the commit 52fb61250a7a132b0cfb9f4a1060a1f3c49e5a25
"xhci-plat: Don't enable legacy PCI interrupts."
Signed-off-by: Jack Pham <[email protected]>
Signed-off-by: Sarah Sharp <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/host/xhci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2047fb4..920e14b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -316,6 +316,9 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ if (xhci->quirks & XHCI_PLAT)
+ return;
+
xhci_free_irq(xhci);
if (xhci->msix_entries) {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Antti Palosaari <[email protected]>
commit c57f87e62368c33ebda11a4993380c8e5a19a5c5 upstream.
PLL was attached twice to frontend0 leaving frontend1 without a tuner.
frontend0 is DVB-C and frontend1 is DVB-T.
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/usb/dvb-usb-v2/anysee.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/dvb-usb-v2/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c
index 90cfa35..eeab79b 100644
--- a/drivers/media/usb/dvb-usb-v2/anysee.c
+++ b/drivers/media/usb/dvb-usb-v2/anysee.c
@@ -442,6 +442,7 @@ static struct cxd2820r_config anysee_cxd2820r_config = {
* IOD[0] ZL10353 1=enabled
* IOE[0] tuner 0=enabled
* tuner is behind ZL10353 I2C-gate
+ * tuner is behind TDA10023 I2C-gate
*
* E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
* PCB: 508TC (rev0.6)
@@ -956,7 +957,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
if (fe && adap->fe[1]) {
/* attach tuner for 2nd FE */
- fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+ fe = dvb_attach(dvb_pll_attach, adap->fe[1],
(0xc0 >> 1), &d->i2c_adap,
DVB_PLL_SAMSUNG_DTOS403IH102A);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Olivier Grenie <[email protected]>
commit d67350f8c4e67f5eba627e1fd111f16257ca9c95 upstream.
Commit 173a64cb3fcf broke support for some dib807x versions.
Fix it by providing backward compatibility with the older versions.
[[email protected]: conflict handling and CodingStyle fixes]
Signed-off-by: Olivier Grenie <[email protected]>
Acked-by: Patrick Boettcher <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb-frontends/dib8000.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb-frontends/dib8000.c b/drivers/media/dvb-frontends/dib8000.c
index 9053614..487c253 100644
--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -2445,7 +2445,8 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe)
if (state->revision == 0x8090)
internal = dib8000_read32(state, 23) / 1000;
- if (state->autosearch_state == AS_SEARCHING_FFT) {
+ if ((state->revision >= 0x8002) &&
+ (state->autosearch_state == AS_SEARCHING_FFT)) {
dib8000_write_word(state, 37, 0x0065); /* P_ctrl_pha_off_max default values */
dib8000_write_word(state, 116, 0x0000); /* P_ana_gain to 0 */
@@ -2481,7 +2482,8 @@ static int dib8000_autosearch_start(struct dvb_frontend *fe)
dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */
dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */
- } else if (state->autosearch_state == AS_SEARCHING_GUARD) {
+ } else if ((state->revision >= 0x8002) &&
+ (state->autosearch_state == AS_SEARCHING_GUARD)) {
c->transmission_mode = TRANSMISSION_MODE_8K;
c->guard_interval = GUARD_INTERVAL_1_8;
c->inversion = 0;
@@ -2583,7 +2585,8 @@ static int dib8000_autosearch_irq(struct dvb_frontend *fe)
struct dib8000_state *state = fe->demodulator_priv;
u16 irq_pending = dib8000_read_word(state, 1284);
- if (state->autosearch_state == AS_SEARCHING_FFT) {
+ if ((state->revision >= 0x8002) &&
+ (state->autosearch_state == AS_SEARCHING_FFT)) {
if (irq_pending & 0x1) {
dprintk("dib8000_autosearch_irq: max correlation result available");
return 3;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?=E5=BC=A0=E5=90=9B?= <[email protected]>
commit 4d90b819ae4c7ea8fd5e2bb7edc68c0f334be2e4 upstream.
Signed-off-by: Jun zhang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/usb/serial/option.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cc7a241..c44400c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1447,6 +1447,17 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff90, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff91, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
/* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Vijaya Mohan Guvva <[email protected]>
commit dcaf9aed995c2b2a49fb86bbbcfa2f92c797ab5d upstream.
Bfa driver crash is observed while pushing the firmware on to chinook
quad port card due to uninitialized bfi_image_ct2 access which gets
initialized only for CT2 ASIC based cards after request_firmware().
For quard port chinook (CT2 ASIC based), bfi_image_ct2 is not getting
initialized as there is no check for chinook PCI device ID before
request_firmware and instead bfi_image_cb is initialized as it is the
default case for card type check.
This patch includes changes to read the right firmware for quad port chinook.
Signed-off-by: Vijaya Mohan Guvva <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/bfa/bfad.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 9611195..999a9d5 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -1832,7 +1832,7 @@ out:
static u32 *
bfad_load_fwimg(struct pci_dev *pdev)
{
- if (pdev->device == BFA_PCI_DEVICE_ID_CT2) {
+ if (bfa_asic_id_ct2(pdev->device)) {
if (bfi_image_ct2_size == 0)
bfad_read_firmware(pdev, &bfi_image_ct2,
&bfi_image_ct2_size, BFAD_FW_FILE_CT2);
@@ -1842,12 +1842,14 @@ bfad_load_fwimg(struct pci_dev *pdev)
bfad_read_firmware(pdev, &bfi_image_ct,
&bfi_image_ct_size, BFAD_FW_FILE_CT);
return bfi_image_ct;
- } else {
+ } else if (bfa_asic_id_cb(pdev->device)) {
if (bfi_image_cb_size == 0)
bfad_read_firmware(pdev, &bfi_image_cb,
&bfi_image_cb_size, BFAD_FW_FILE_CB);
return bfi_image_cb;
}
+
+ return NULL;
}
static void
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley <[email protected]>
commit 8f248dae133668bfb8e9379b4b3f0571c858b24a upstream.
byBBPreEDIndex value is initially 0, this means that from
cold BBvUpdatePreEDThreshold is never set.
This means that sensitivity may be in an ambiguous state,
failing to scan any wireless points or at least distant ones.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/vt6656/baseband.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c
index 3ff1126..5518533 100644
--- a/drivers/staging/vt6656/baseband.c
+++ b/drivers/staging/vt6656/baseband.c
@@ -1466,7 +1466,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)
if( bScanning )
{ // need Max sensitivity //RSSI -69, -70,....
- if(pDevice->byBBPreEDIndex == 0) break;
pDevice->byBBPreEDIndex = 0;
ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xC9, 0x00); //CR201(0xC9)
ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xCE, 0x30); //CR206(0xCE)
@@ -1609,7 +1608,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)
if( bScanning )
{ // need Max sensitivity //RSSI -69, -70, ...
- if(pDevice->byBBPreEDIndex == 0) break;
pDevice->byBBPreEDIndex = 0;
ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xC9, 0x00); //CR201(0xC9)
ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xCE, 0x24); //CR206(0xCE)
@@ -1761,7 +1759,6 @@ void BBvUpdatePreEDThreshold(struct vnt_private *pDevice, int bScanning)
case RF_VT3342A0: //RobertYu:20060627, testing table
if( bScanning )
{ // need Max sensitivity //RSSI -67, -68, ...
- if(pDevice->byBBPreEDIndex == 0) break;
pDevice->byBBPreEDIndex = 0;
ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xC9, 0x00); //CR201(0xC9)
ControlvWriteByte(pDevice, MESSAGE_REQUEST_BBREG, 0xCE, 0x38); //CR206(0xCE)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley <[email protected]>
commit 17f335c304ac19d9b11814238fe8a7519d80e2ff upstream.
Trivial USB ID addition for Avermedia H335.
Signed-off-by: Malcolm Priestley <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/usb/dvb-usb-v2/it913x.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
index 886da16..54e803a 100644
--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -239,6 +239,7 @@
#define USB_PID_AVERMEDIA_A835B_4835 0x4835
#define USB_PID_AVERMEDIA_1867 0x1867
#define USB_PID_AVERMEDIA_A867 0xa867
+#define USB_PID_AVERMEDIA_H335 0x0335
#define USB_PID_AVERMEDIA_TWINSTAR 0x0825
#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006
#define USB_PID_TECHNOTREND_CONNECT_S2400_8KEEPROM 0x3009
diff --git a/drivers/media/usb/dvb-usb-v2/it913x.c b/drivers/media/usb/dvb-usb-v2/it913x.c
index 1cb6899..fe95a58 100644
--- a/drivers/media/usb/dvb-usb-v2/it913x.c
+++ b/drivers/media/usb/dvb-usb-v2/it913x.c
@@ -799,6 +799,9 @@ static const struct usb_device_id it913x_id_table[] = {
{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2,
&it913x_properties, "Digital Dual TV Receiver CTVDIGDUAL_V2",
RC_MAP_IT913X_V1) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335,
+ &it913x_properties, "Avermedia H335",
+ RC_MAP_IT913X_V2) },
{} /* Terminating entry */
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ludovic Desroches <[email protected]>
commit 0645b93f6c223b594c0dca348e2ae0a23bccf6e3 upstream.
pinctrl-names property was missing from mmc nodes.
Signed-off-by: Ludovic Desroches <[email protected]>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c3e5148..cf7de80 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -618,6 +618,7 @@
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -629,6 +630,7 @@
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
dma-names = "rxtx";
#address-cells = <1>;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <[email protected]>
commit 86b3bde003e6bf60ccb9c09b4115b8a2f533974c upstream.
The spi command must include the full message length including any
prepended writes, else transfers larger than 256 bytes will be
incomplete.
Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/spi/spi-bcm63xx.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 9fd7a39..49c21cd 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -169,8 +169,6 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
transfer_list);
}
- len -= prepend_len;
-
init_completion(&bs->done);
/* Fill in the Message control register */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit d82403a9f407217b6aed5260aa92a120e8e98310 upstream.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/stats.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/stats.c b/drivers/net/wireless/rtlwifi/stats.c
index 8ed3174..4f083fc 100644
--- a/drivers/net/wireless/rtlwifi/stats.c
+++ b/drivers/net/wireless/rtlwifi/stats.c
@@ -176,6 +176,7 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)
struct rtl_sta_info *drv_priv = NULL;
struct ieee80211_sta *sta = NULL;
long undec_sm_pwdb;
+ long undec_sm_cck;
rcu_read_lock();
if (rtlpriv->mac80211.opmode != NL80211_IFTYPE_STATION)
@@ -185,12 +186,16 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)
if (sta) {
drv_priv = (struct rtl_sta_info *) sta->drv_priv;
undec_sm_pwdb = drv_priv->rssi_stat.undec_sm_pwdb;
+ undec_sm_cck = drv_priv->rssi_stat.undec_sm_cck;
} else {
undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb;
+ undec_sm_cck = rtlpriv->dm.undec_sm_cck;
}
if (undec_sm_pwdb < 0)
undec_sm_pwdb = pstatus->rx_pwdb_all;
+ if (undec_sm_cck < 0)
+ undec_sm_cck = pstatus->rx_pwdb_all;
if (pstatus->rx_pwdb_all > (u32) undec_sm_pwdb) {
undec_sm_pwdb = (((undec_sm_pwdb) *
(RX_SMOOTH_FACTOR - 1)) +
@@ -200,6 +205,15 @@ static void rtl_process_pwdb(struct ieee80211_hw *hw, struct rtl_stats *pstatus)
undec_sm_pwdb = (((undec_sm_pwdb) * (RX_SMOOTH_FACTOR - 1)) +
(pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
}
+ if (pstatus->rx_pwdb_all > (u32) undec_sm_cck) {
+ undec_sm_cck = (((undec_sm_pwdb) *
+ (RX_SMOOTH_FACTOR - 1)) +
+ (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+ undec_sm_cck = undec_sm_cck + 1;
+ } else {
+ undec_sm_pwdb = (((undec_sm_cck) * (RX_SMOOTH_FACTOR - 1)) +
+ (pstatus->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+ }
if (sta) {
drv_priv->rssi_stat.undec_sm_pwdb = undec_sm_pwdb;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior <[email protected]>
commit d6a484520c5572a4170fa915109ccfc0c38f5008 upstream.
In commit 85747f ("PATCH] parport: add NetMOS 9805 support") Max added
the PCI ID for NetMOS 9805 based on a Debian bug report from 2k4 which
was at the v2.4.26 time frame. The patch made into 2.6.14.
Shortly before that patch akpm merged commit 296d3c783b ("[PATCH] Support
NetMOS based PCI cards providing serial and parallel ports") which made
into v2.6.9-rc1.
Now we have two different entries for the same PCI id.
I have here the NetMos 9805 which claims to support SPP/EPP/ECP mode.
This patch takes Max's entry for titan_1284p1 (base != -1 specifies the
ioport for ECP mode) and replaces akpm's entry for netmos_9805 which
specified -1 (=none). Both share the same PCI-ID (my card has subsystem
0x1000 / 0x0020 so it should match PCI_ANY).
While here I also drop the entry for titan_1284p2 which is the same as
netmos_9815.
Cc: Maximilian Attems <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/parport/parport_pc.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 903e128..b0a0d53 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2596,8 +2596,6 @@ enum parport_pc_pci_cards {
syba_2p_epp,
syba_1p_ecp,
titan_010l,
- titan_1284p1,
- titan_1284p2,
avlab_1p,
avlab_2p,
oxsemi_952,
@@ -2656,8 +2654,6 @@ static struct parport_pc_pci {
/* syba_2p_epp AP138B */ { 2, { { 0, 0x078 }, { 0, 0x178 }, } },
/* syba_1p_ecp W83787 */ { 1, { { 0, 0x078 }, } },
/* titan_010l */ { 1, { { 3, -1 }, } },
- /* titan_1284p1 */ { 1, { { 0, 1 }, } },
- /* titan_1284p2 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* avlab_1p */ { 1, { { 0, 1}, } },
/* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} },
/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
@@ -2673,8 +2669,8 @@ static struct parport_pc_pci {
/* netmos_9705 */ { 1, { { 0, -1 }, } },
/* netmos_9715 */ { 2, { { 0, 1 }, { 2, 3 },} },
/* netmos_9755 */ { 2, { { 0, 1 }, { 2, 3 },} },
- /* netmos_9805 */ { 1, { { 0, -1 }, } },
- /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } },
+ /* netmos_9805 */ { 1, { { 0, 1 }, } },
+ /* netmos_9815 */ { 2, { { 0, 1 }, { 2, 3 }, } },
/* netmos_9901 */ { 1, { { 0, -1 }, } },
/* netmos_9865 */ { 1, { { 0, -1 }, } },
/* quatech_sppxp100 */ { 1, { { 0, 1 }, } },
@@ -2718,8 +2714,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
- { 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
- { 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
/* AFAVLAB_TK9902 */
{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit c7848f69ec4a8c03732cde5c949bd2aa711a9f4b upstream.
decode_op_hdr() cannot distinguish between an XDR decoding error and
the perfectly valid errorcode NFS4ERR_IO. This is normally not a
problem, but for the particular case of OPEN, we need to be able
to increment the NFSv4 open sequence id when the server returns
a valid response.
Reported-by: J Bruce Fields <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nfs/nfs4xdr.c | 47 +++++++++++++++++++++++++++++++----------------
1 file changed, 31 insertions(+), 16 deletions(-)
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 3850b01..e24c755 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3050,7 +3050,8 @@ out_overflow:
return -EIO;
}
-static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
+static bool __decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected,
+ int *nfs_retval)
{
__be32 *p;
uint32_t opnum;
@@ -3060,19 +3061,32 @@ static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
if (unlikely(!p))
goto out_overflow;
opnum = be32_to_cpup(p++);
- if (opnum != expected) {
- dprintk("nfs: Server returned operation"
- " %d but we issued a request for %d\n",
- opnum, expected);
- return -EIO;
- }
+ if (unlikely(opnum != expected))
+ goto out_bad_operation;
nfserr = be32_to_cpup(p);
- if (nfserr != NFS_OK)
- return nfs4_stat_to_errno(nfserr);
- return 0;
+ if (nfserr == NFS_OK)
+ *nfs_retval = 0;
+ else
+ *nfs_retval = nfs4_stat_to_errno(nfserr);
+ return true;
+out_bad_operation:
+ dprintk("nfs: Server returned operation"
+ " %d but we issued a request for %d\n",
+ opnum, expected);
+ *nfs_retval = -EREMOTEIO;
+ return false;
out_overflow:
print_overflow_msg(__func__, xdr);
- return -EIO;
+ *nfs_retval = -EIO;
+ return false;
+}
+
+static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
+{
+ int retval;
+
+ __decode_op_hdr(xdr, expected, &retval);
+ return retval;
}
/* Dummy routine */
@@ -4954,11 +4968,12 @@ static int decode_open(struct xdr_stream *xdr, struct nfs_openres *res)
uint32_t savewords, bmlen, i;
int status;
- status = decode_op_hdr(xdr, OP_OPEN);
- if (status != -EIO)
- nfs_increment_open_seqid(status, res->seqid);
- if (!status)
- status = decode_stateid(xdr, &res->stateid);
+ if (!__decode_op_hdr(xdr, OP_OPEN, &status))
+ return status;
+ nfs_increment_open_seqid(status, res->seqid);
+ if (status)
+ return status;
+ status = decode_stateid(xdr, &res->stateid);
if (unlikely(status))
return status;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit f699273d6a624266ebc9198774f06ee64a3847a1 upstream.
The static analyser "cppcheck" shows the following typo:
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c:1081]: (style) Same expression on both sides of '!='.
Signed-off-by: Larry Finger <[email protected]>
Reported-by: David Binderman <[email protected]>
Cc: David Binderman <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8188ee/dm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c b/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
index 21a5cf0..a6184b6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/dm.c
@@ -1078,7 +1078,7 @@ static void rtl88e_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw
rtldm->swing_flag_ofdm = true;
}
- if (rtldm->swing_idx_cck != rtldm->swing_idx_cck) {
+ if (rtldm->swing_idx_cck_cur != rtldm->swing_idx_cck) {
rtldm->swing_idx_cck_cur = rtldm->swing_idx_cck;
rtldm->swing_flag_cck = true;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit e9b0784bb9de3152e787ee779868c626b137fb3b upstream.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/rf.c | 29 ++++++++++++++++-------------
1 file changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
index 2119313..b878d56 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/rf.c
@@ -85,17 +85,15 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
if (mac->act_scanning) {
tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
- if (turbo_scanoff) {
- for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
- tx_agc[idx1] = ppowerlevel[idx1] |
- (ppowerlevel[idx1] << 8) |
- (ppowerlevel[idx1] << 16) |
- (ppowerlevel[idx1] << 24);
- if (rtlhal->interface == INTF_USB) {
- if (tx_agc[idx1] > 0x20 &&
- rtlefuse->external_pa)
- tx_agc[idx1] = 0x20;
- }
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ tx_agc[idx1] = ppowerlevel[idx1] |
+ (ppowerlevel[idx1] << 8) |
+ (ppowerlevel[idx1] << 16) |
+ (ppowerlevel[idx1] << 24);
+ if (rtlhal->interface == INTF_USB) {
+ if (tx_agc[idx1] > 0x20 &&
+ rtlefuse->external_pa)
+ tx_agc[idx1] = 0x20;
}
}
} else {
@@ -107,7 +105,7 @@ void rtl92cu_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
TXHIGHPWRLEVEL_LEVEL2) {
tx_agc[RF90_PATH_A] = 0x00000000;
tx_agc[RF90_PATH_B] = 0x00000000;
- } else{
+ } else {
for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
tx_agc[idx1] = ppowerlevel[idx1] |
(ppowerlevel[idx1] << 8) |
@@ -373,7 +371,12 @@ static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw,
regoffset == RTXAGC_B_MCS07_MCS04)
regoffset = 0xc98;
for (i = 0; i < 3; i++) {
- writeVal = (writeVal > 6) ? (writeVal - 6) : 0;
+ if (i != 2)
+ writeVal = (writeVal > 8) ?
+ (writeVal - 8) : 0;
+ else
+ writeVal = (writeVal > 6) ?
+ (writeVal - 6) : 0;
rtl_write_byte(rtlpriv, (u32)(regoffset + i),
(u8)writeVal);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 97204e93f01868eeba6ae5c4f3270f32905bb418 upstream.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c | 36 +++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
index d2d57a2..06cb94c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c
@@ -158,6 +158,42 @@ static const u8 cckswing_table_ch14[CCK_TABLE_SIZE][8] = {
{0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00}
};
+static u32 power_index_reg[6] = {0xc90, 0xc91, 0xc92, 0xc98, 0xc99, 0xc9a};
+
+void dm_restorepowerindex(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 index;
+
+ for (index = 0; index < 6; index++)
+ rtl_write_byte(rtlpriv, power_index_reg[index],
+ rtlpriv->dm.powerindex_backup[index]);
+}
+EXPORT_SYMBOL_GPL(dm_restorepowerindex);
+
+void dm_writepowerindex(struct ieee80211_hw *hw, u8 value)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 index;
+
+ for (index = 0; index < 6; index++)
+ rtl_write_byte(rtlpriv, power_index_reg[index], value);
+}
+EXPORT_SYMBOL_GPL(dm_writepowerindex);
+
+void dm_savepowerindex(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 index;
+ u8 tmp;
+
+ for (index = 0; index < 6; index++) {
+ tmp = rtl_read_byte(rtlpriv, power_index_reg[index]);
+ rtlpriv->dm.powerindex_backup[index] = tmp;
+ }
+}
+EXPORT_SYMBOL_GPL(dm_savepowerindex);
+
static void rtl92c_dm_diginit(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 9806eacf5de27ab01d680c5d75c92a3a89734e4f upstream.
This patch uses the newly introduced power index register routines.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/dm.c | 9 +++++++++
drivers/net/wireless/rtlwifi/rtl8192cu/dm.h | 3 +++
2 files changed, 12 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/dm.c b/drivers/net/wireless/rtlwifi/rtl8192cu/dm.c
index 16a0b9e..c16209a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/dm.c
@@ -101,6 +101,15 @@ void rtl92cu_dm_dynamic_txpower(struct ieee80211_hw *hw)
"PHY_SetTxPowerLevel8192S() Channel = %d\n",
rtlphy->current_channel);
rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+ if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TXHIGHPWRLEVEL_NORMAL)
+ dm_restorepowerindex(hw);
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TXHIGHPWRLEVEL_LEVEL1)
+ dm_writepowerindex(hw, 0x14);
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TXHIGHPWRLEVEL_LEVEL2)
+ dm_writepowerindex(hw, 0x10);
}
rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/dm.h b/drivers/net/wireless/rtlwifi/rtl8192cu/dm.h
index d947e7d..fafa6ba 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/dm.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/dm.h
@@ -30,3 +30,6 @@
#include "../rtl8192ce/dm.h"
void rtl92cu_dm_dynamic_txpower(struct ieee80211_hw *hw);
+void dm_savepowerindex(struct ieee80211_hw *hw);
+void dm_writepowerindex(struct ieee80211_hw *hw, u8 value);
+void dm_restorepowerindex(struct ieee80211_hw *hw);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 65b9cc97c6852fae19dc5c7745e9abc8dd380aad upstream.
The USB drivers were not updating the beacon statistics, which led to
false beacon loss indications.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/usb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 0f93614..9792474 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -484,6 +484,8 @@ static void _rtl_usb_rx_process_agg(struct ieee80211_hw *hw,
if (unicast)
rtlpriv->link_info.num_rx_inperiod++;
}
+ /* static bcn for roaming */
+ rtl_beacon_statistic(hw, skb);
}
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit dc6405712268fe514d3dd89aa936c4397b0871b9 upstream.
The current number of RX buffers queued is 32, which is too small under
heavy load. That number is doubled.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index e56778c..0f93614 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -555,7 +555,7 @@ static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb)
}
}
-#define __RX_SKB_MAX_QUEUED 32
+#define __RX_SKB_MAX_QUEUED 64
static void _rtl_rx_work(unsigned long param)
{
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit c908c74e005de780fddbe8cb6fcd44803f5d4b74 upstream.
Changes in the gain-control mechanism will require some changes in the header.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h
index 518e208..4f232a0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h
@@ -91,6 +91,17 @@
#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
+#define DYNAMIC_FUNC_DISABLE 0x0
+#define DYNAMIC_FUNC_DIG BIT(0)
+#define DYNAMIC_FUNC_HP BIT(1)
+#define DYNAMIC_FUNC_SS BIT(2) /*Tx Power Tracking*/
+#define DYNAMIC_FUNC_BT BIT(3)
+#define DYNAMIC_FUNC_ANT_DIV BIT(4)
+
+#define RSSI_CCK 0
+#define RSSI_OFDM 1
+#define RSSI_DEFAULT 2
+
struct swat_t {
u8 failure_cnt;
u8 try_flag;
@@ -167,5 +178,8 @@ void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool recovery);
void rtl92c_dm_dynamic_txpower(struct ieee80211_hw *hw);
void rtl92c_dm_bt_coexist(struct ieee80211_hw *hw);
+void dm_savepowerindex(struct ieee80211_hw *hw);
+void dm_writepowerindex(struct ieee80211_hw *hw, u8 value);
+void dm_restorepowerindex(struct ieee80211_hw *hw);
#endif
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 619ce76f8bb850b57032501a39f26aa6c6731c70 upstream.
The present code fails to set the linked state when an interface is
added.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 0f12cd3..3550e8a 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -194,6 +194,7 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS]);
}
+ mac->link_state = MAC80211_LINKED;
break;
case NL80211_IFTYPE_ADHOC:
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit 743db27c526e0f31cc507959d662e97e2048a86f upstream.
The diagnose code to be used is the contents of the base register (if not
zero), plus the displacement. The current code ignores the base register
contents. So let's fix that...
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/s390/kvm/diag.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 3074475..0ae0ea6 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -130,7 +130,7 @@ static int __diag_virtio_hypercall(struct kvm_vcpu *vcpu)
int kvm_s390_handle_diag(struct kvm_vcpu *vcpu)
{
- int code = (vcpu->arch.sie_block->ipb & 0xfff0000) >> 16;
+ int code = kvm_s390_get_base_disp_rs(vcpu) & 0xffff;
if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 8fd77aec1a9d6f4328fc0244f21932114e066df3 upstream.
This driver has a watchdog timer that attempts to reconnect when beacon frames
are not seen for 6 seconds. This patch disables that reconnect whenever the
device has never been connected.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/wireless/rtlwifi/base.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 3333b04..e83d671 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -1437,7 +1437,8 @@ void rtl_watchdog_wq_callback(void *data)
/* if we can't recv beacon for 6s, we should
* reconnect this AP
*/
- if (rtlpriv->link_info.roam_times >= 3) {
+ if ((rtlpriv->link_info.roam_times >= 3) &&
+ !is_zero_ether_addr(rtlpriv->mac80211.bssid)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"AP off, try to reconnect now\n");
rtlpriv->link_info.roam_times = 0;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Bob Peterson <[email protected]>
commit 62e96cf81988101fe9e086b2877307b6adda5197 upstream.
This patch calls get_write_access in function gfs2_setattr_chown,
which merely increases inode->i_writecount for the duration of the
function. That will ensure that any file closes won't delete the
inode's multi-block reservation while the function is running.
It also ensures that a multi-block reservation exists when needed
for quota change operations during the chown.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Steven Whitehouse <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/gfs2/inode.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index e4bd52f..94b7068 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -1608,10 +1608,22 @@ static int setattr_chown(struct inode *inode, struct iattr *attr)
if (!(attr->ia_valid & ATTR_GID) || gid_eq(ogid, ngid))
ogid = ngid = NO_GID_QUOTA_CHANGE;
- error = gfs2_quota_lock(ip, nuid, ngid);
+ error = get_write_access(inode);
if (error)
return error;
+ error = gfs2_rs_alloc(ip);
+ if (error)
+ goto out;
+
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ goto out;
+
+ error = gfs2_quota_lock(ip, nuid, ngid);
+ if (error)
+ goto out;
+
if (!uid_eq(ouid, NO_UID_QUOTA_CHANGE) ||
!gid_eq(ogid, NO_GID_QUOTA_CHANGE)) {
error = gfs2_quota_check(ip, nuid, ngid);
@@ -1638,6 +1650,8 @@ out_end_trans:
gfs2_trans_end(sdp);
out_gunlock_q:
gfs2_quota_unlock(ip);
+out:
+ put_write_access(inode);
return error;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Taras Kondratiuk <[email protected]>
commit b25f3e1c358434bf850220e04f28eebfc45eb634 upstream.
Kexec disables outer cache before jumping to reboot code, but it doesn't
flush it explicitly. Flush is done implicitly inside of l2x0_disable().
But some SoC's override default .disable handler and don't flush cache.
This may lead to a corrupted memory during Kexec reboot on these
platforms.
This patch adds cache flush inside of OMAP4 and Highbank outer_cache.disable()
handlers to make it consistent with default l2x0_disable().
Acked-by: Rob Herring <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Taras Kondratiuk <[email protected]>
Signed-off-by: Russell King <[email protected]>
Cc: Wang Nan <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-highbank/highbank.c | 1 +
arch/arm/mach-omap2/omap4-common.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index d247cf2..4a929a2 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -71,6 +71,7 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
#ifdef CONFIG_CACHE_L2X0
static void highbank_l2x0_disable(void)
{
+ outer_flush_all();
/* Disable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x0);
}
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5791143..3f44b16 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -163,6 +163,7 @@ void __iomem *omap4_get_l2cache_base(void)
static void omap4_l2x0_disable(void)
{
+ outer_flush_all();
/* Disable PL310 L2 Cache controller */
omap_smc1(0x102, 0x0);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnaldo Carvalho de Melo <[email protected]>
commit 3b16ff89676d9902dc39976aee3cb0314ee37d93 upstream.
Cast __u64 to u64 to silence this warning on older distros, such as
Fedora 12:
CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o
cc1: warnings being treated as errors
util/scripting-engines/trace-event-perl.c: In function ‘perl_process_tracepoint’:
util/scripting-engines/trace-event-perl.c:285: error: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘__u64’
make[1]: *** [/tmp/build/perf/util/scripting-engines/trace-event-perl.o] Error 1
make: *** [install] Error 2
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@fedora12 linux]$
Reported-by: Waiman Long <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: Waiman Long <[email protected]>
Link: http://lkml.kernel.org/n/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Xie XiuQi <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
tools/perf/util/scripting-engines/trace-event-perl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/util/scripting-engines/trace-event-perl.c b/tools/perf/util/scripting-engines/trace-event-perl.c
index eacec85..b4741b0 100644
--- a/tools/perf/util/scripting-engines/trace-event-perl.c
+++ b/tools/perf/util/scripting-engines/trace-event-perl.c
@@ -282,7 +282,7 @@ static void perl_process_tracepoint(union perf_event *perf_event __maybe_unused,
event = find_cache_event(evsel);
if (!event)
- die("ug! no event found for type %" PRIu64, evsel->attr.config);
+ die("ug! no event found for type %" PRIu64, (u64)evsel->attr.config);
pid = raw_field_value(event, "common_pid", data);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <[email protected]>
commit eb86301f293da3c362db729a9f40ddb25755902b upstream.
When setting a new frame buffer with the mode set base operation the
pitch value might change. Set the hardware plane pitch register at the
same time as the plane base address in the rcar_du_plane_update_base()
function to make sure the pitch value always matches the frame buffer.
Signed-off-by: Laurent Pinchart <[email protected]>
[ luis: backported to 3.11:
- replaced 'rgrp' by 'rcdu' in rcar_du_plane_write() call ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 1 -
drivers/gpu/drm/rcar-du/rcar_du_plane.c | 21 +++++++++++----------
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
index 24183fb..23a946d 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -408,7 +408,6 @@ static int rcar_du_crtc_mode_set(struct drm_crtc *crtc,
goto error;
rcrtc->plane->format = format;
- rcrtc->plane->pitch = crtc->fb->pitches[0];
rcrtc->plane->src_x = x;
rcrtc->plane->src_y = y;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
index a65f81d..e376b4c 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -102,6 +102,15 @@ void rcar_du_plane_update_base(struct rcar_du_plane *plane)
{
struct rcar_du_device *rcdu = plane->dev;
unsigned int index = plane->hwindex;
+ u32 mwr;
+
+ /* Memory pitch (expressed in pixels) */
+ if (plane->format->planes == 2)
+ mwr = plane->pitch;
+ else
+ mwr = plane->pitch * 8 / plane->format->bpp;
+
+ rcar_du_plane_write(rcdu, index, PnMWR, mwr);
/* According to the datasheet the Y position is expressed in raster line
* units. However, 32bpp formats seem to require a doubled Y position
@@ -128,6 +137,8 @@ void rcar_du_plane_compute_base(struct rcar_du_plane *plane,
{
struct drm_gem_cma_object *gem;
+ plane->pitch = fb->pitches[0];
+
gem = drm_fb_cma_get_gem_obj(fb, 0);
plane->dma[0] = gem->paddr + fb->offsets[0];
@@ -204,7 +215,6 @@ static void __rcar_du_plane_setup(struct rcar_du_plane *plane,
struct rcar_du_device *rcdu = plane->dev;
u32 ddcr2 = PnDDCR2_CODE;
u32 ddcr4;
- u32 mwr;
/* Data format
*
@@ -235,14 +245,6 @@ static void __rcar_du_plane_setup(struct rcar_du_plane *plane,
rcar_du_plane_write(rcdu, index, PnDDCR2, ddcr2);
rcar_du_plane_write(rcdu, index, PnDDCR4, ddcr4);
- /* Memory pitch (expressed in pixels) */
- if (plane->format->planes == 2)
- mwr = plane->pitch;
- else
- mwr = plane->pitch * 8 / plane->format->bpp;
-
- rcar_du_plane_write(rcdu, index, PnMWR, mwr);
-
/* Destination position and size */
rcar_du_plane_write(rcdu, index, PnDSXR, plane->width);
rcar_du_plane_write(rcdu, index, PnDSYR, plane->height);
@@ -304,7 +306,6 @@ rcar_du_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
rplane->crtc = crtc;
rplane->format = format;
- rplane->pitch = fb->pitches[0];
rplane->src_x = src_x >> 16;
rplane->src_y = src_y >> 16;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jon Medhurst <[email protected]>
commit fe43390702a1b5741fdf217063b05c7612b38303 upstream.
When the pl011 is being used for a console, pl011_console_write forces
the control register (CR) to enable the UART for transmission and then
restores this to the original value afterwards. It does this while
holding the port lock.
Unfortunately, when the uart is started or shutdown - say in response to
userland using the serial device for a terminal - then this updates the
control register without any locking.
This means we can have
pl011_console_write Save CR
pl011_startup Initialise CR, e.g. enable receive
pl011_console_write Restore old CR with receive not enabled
this result is a serial port which doesn't respond to any input.
A similar race in reverse could happen when the device is shutdown.
We can fix these problems by taking the port lock when updating CR.
Signed-off-by: Jon Medhurst <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/tty/serial/amba-pl011.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 28b35ad..7324301 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1533,6 +1533,8 @@ static int pl011_startup(struct uart_port *port)
/*
* Provoke TX FIFO interrupt into asserting.
*/
+ spin_lock_irq(&uap->port.lock);
+
cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
@@ -1557,6 +1559,8 @@ static int pl011_startup(struct uart_port *port)
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
+ spin_unlock_irq(&uap->port.lock);
+
/*
* initialise the old status of the modem signals
*/
@@ -1625,11 +1629,13 @@ static void pl011_shutdown(struct uart_port *port)
* it during startup().
*/
uap->autorts = false;
+ spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR);
uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);
+ spin_unlock_irq(&uap->port.lock);
/*
* disable break condition and fifos
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: H Hartley Sweeten <[email protected]>
commit 90daf69a7a3f1d1a41018c799968a0bb896d65e0 upstream.
The SDF_CMD_READ should be one of the s->subdev_flags not part of
the s->type.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/comedi/drivers/addi_apci_1032.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 8a93542..ecc67a3 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -325,8 +325,8 @@ static int apci1032_auto_attach(struct comedi_device *dev,
s = &dev->subdevices[1];
if (dev->irq) {
dev->read_subdev = s;
- s->type = COMEDI_SUBD_DI | SDF_CMD_READ;
- s->subdev_flags = SDF_READABLE;
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE | SDF_CMD_READ;
s->n_chan = 1;
s->maxdata = 1;
s->range_table = &range_digital;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugh Dickins <[email protected]>
commit eecc1e426d681351a6026a7d3e7d225f38955b6c upstream.
We see General Protection Fault on RSI in copy_page_rep: that RSI is
what you get from a NULL struct page pointer.
RIP: 0010:[<ffffffff81154955>] [<ffffffff81154955>] copy_page_rep+0x5/0x10
RSP: 0000:ffff880136e15c00 EFLAGS: 00010286
RAX: ffff880000000000 RBX: ffff880136e14000 RCX: 0000000000000200
RDX: 6db6db6db6db6db7 RSI: db73880000000000 RDI: ffff880dd0c00000
RBP: ffff880136e15c18 R08: 0000000000000200 R09: 000000000005987c
R10: 000000000005987c R11: 0000000000000200 R12: 0000000000000001
R13: ffffea00305aa000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f195752f700(0000) GS:ffff880c7fc20000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000093010000 CR3: 00000001458e1000 CR4: 00000000000027e0
Call Trace:
copy_user_huge_page+0x93/0xab
do_huge_pmd_wp_page+0x710/0x815
handle_mm_fault+0x15d8/0x1d70
__do_page_fault+0x14d/0x840
do_page_fault+0x2f/0x90
page_fault+0x22/0x30
do_huge_pmd_wp_page() tests is_huge_zero_pmd(orig_pmd) four times: but
since shrink_huge_zero_page() can free the huge_zero_page, and we have
no hold of our own on it here (except where the fourth test holds
page_table_lock and has checked pmd_same), it's possible for it to
answer yes the first time, but no to the second or third test. Change
all those last three to tests for NULL page.
(Note: this is not the same issue as trinity's DEBUG_PAGEALLOC BUG
in copy_page_rep with RSI: ffff88009c422000, reported by Sasha Levin
in https://lkml.org/lkml/2013/3/29/103. I believe that one is due
to the source page being split, and a tail page freed, while copy
is in progress; and not a problem without DEBUG_PAGEALLOC, since
the pmd_same check will prevent a miscopy from being made visible.)
Fixes: 97ae17497e99 ("thp: implement refcounting for huge zero page")
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11: based on hughd's backport to 3.10.27 ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/huge_memory.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 31950d6..5e91a87 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1170,7 +1170,7 @@ alloc:
if (unlikely(!new_page)) {
count_vm_event(THP_FAULT_FALLBACK);
- if (is_huge_zero_pmd(orig_pmd)) {
+ if (!page) {
ret = do_huge_pmd_wp_zero_page_fallback(mm, vma,
address, pmd, orig_pmd, haddr);
} else {
@@ -1194,7 +1194,7 @@ alloc:
goto out;
}
- if (is_huge_zero_pmd(orig_pmd))
+ if (!page)
clear_huge_page(new_page, haddr, HPAGE_PMD_NR);
else
copy_user_huge_page(new_page, page, haddr, vma, HPAGE_PMD_NR);
@@ -1219,7 +1219,7 @@ alloc:
page_add_new_anon_rmap(new_page, vma, haddr);
set_pmd_at(mm, haddr, pmd, entry);
update_mmu_cache_pmd(vma, address, pmd);
- if (is_huge_zero_pmd(orig_pmd)) {
+ if (!page) {
add_mm_counter(mm, MM_ANONPAGES, HPAGE_PMD_NR);
put_huge_zero_page();
} else {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerald Schaefer <[email protected]>
commit c196403b79aa241c3fefb3ee5bb328aa7c5cc860 upstream.
commit ae4b46e9d "net: rds: use this_cpu_* per-cpu helper" broke per-cpu
handling for rds. chpfirst is the result of __this_cpu_read(), so it is
an absolute pointer and not __percpu. Therefore, __this_cpu_write()
should not operate on chpfirst, but rather on cache->percpu->first, just
like __this_cpu_read() did before.
Signed-off-byd Gerald Schaefer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/rds/ib_recv.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index 8eb9501..b7ebe23 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -421,8 +421,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
struct rds_ib_refill_cache *cache)
{
unsigned long flags;
- struct list_head *old;
- struct list_head __percpu *chpfirst;
+ struct list_head *old, *chpfirst;
local_irq_save(flags);
@@ -432,7 +431,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
else /* put on front */
list_add_tail(new_item, chpfirst);
- __this_cpu_write(chpfirst, new_item);
+ __this_cpu_write(cache->percpu->first, new_item);
__this_cpu_inc(cache->percpu->count);
if (__this_cpu_read(cache->percpu->count) < RDS_IB_RECYCLE_BATCH_COUNT)
@@ -452,7 +451,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
} while (old);
- __this_cpu_write(chpfirst, NULL);
+ __this_cpu_write(cache->percpu->first, NULL);
__this_cpu_write(cache->percpu->count, 0);
end:
local_irq_restore(flags);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: H Hartley Sweeten <[email protected]>
commit 48108fe3daa0d142f9b97178fdb23704ea3a407b upstream.
The dev->irq passed to request_irq() will always be 0 when the auto_attach
function is called. The pcidev->irq should be used instead to get the correct
irq number.
Signed-off-by: H Hartley Sweeten <[email protected]>
Reviewed-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/staging/comedi/drivers/adl_pci9111.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index af51c74..98f7167 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -869,7 +869,7 @@ static int pci9111_auto_attach(struct comedi_device *dev,
pci9111_reset(dev);
if (pcidev->irq > 0) {
- ret = request_irq(dev->irq, pci9111_interrupt,
+ ret = request_irq(pcidev->irq, pci9111_interrupt,
IRQF_SHARED, dev->board_name, dev);
if (ret)
return ret;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <[email protected]>
commit 2b844ba79f4a114bd228ad6fee040ffd99a0963d upstream.
This reverts commit f6308b36c411 (ACPI: Add BayTrail SoC GPIO and LPSS
ACPI IDs), because it causes the Alan Cox' ASUS T100TA to "crash and
burn" during boot if the Baytrail pinctrl driver is compiled in.
Fixes: f6308b36c411 (ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs)
Reported-by: One Thousand Gnomes <[email protected]>
Requested-by: Linus Walleij <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/acpi/acpi_lpss.c | 1 -
drivers/pinctrl/pinctrl-baytrail.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index ab19263..fb78bb9 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -156,7 +156,6 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
{ "80860F14", (unsigned long)&byt_sdio_dev_desc },
{ "80860F41", (unsigned long)&byt_i2c_dev_desc },
{ "INT33B2", },
- { "INT33FC", },
{ }
};
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
index 9041a6e..e9d735d 100644
--- a/drivers/pinctrl/pinctrl-baytrail.c
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -508,7 +508,6 @@ static const struct dev_pm_ops byt_gpio_pm_ops = {
static const struct acpi_device_id byt_gpio_acpi_match[] = {
{ "INT33B2", 0 },
- { "INT33FC", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, byt_gpio_acpi_match);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 03e5ac2fc3bf6f4140db0371e8bb4243b24e3e02 upstream.
Commit 8456a648cf44 ("slab: use struct page for slab management") causes
a crash in the LVM2 testsuite on PA-RISC (the crashing test is
fsadm.sh). The testsuite doesn't crash on 3.12, crashes on 3.13-rc1 and
later.
Bad Address (null pointer deref?): Code=15 regs=000000413edd89a0 (Addr=000006202224647d)
CPU: 3 PID: 24008 Comm: loop0 Not tainted 3.13.0-rc6 #5
task: 00000001bf3c0048 ti: 000000413edd8000 task.ti: 000000413edd8000
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001101111100100001110 Not tainted
r00-03 000000ff0806f90e 00000000405c8de0 000000004013e6c0 000000413edd83f0
r04-07 00000000405a95e0 0000000000000200 00000001414735f0 00000001bf349e40
r08-11 0000000010fe3d10 0000000000000001 00000040829c7778 000000413efd9000
r12-15 0000000000000000 000000004060d800 0000000010fe3000 0000000010fe3000
r16-19 000000413edd82a0 00000041078ddbc0 0000000000000010 0000000000000001
r20-23 0008f3d0d83a8000 0000000000000000 00000040829c7778 0000000000000080
r24-27 00000001bf349e40 00000001bf349e40 202d66202224640d 00000000405a95e0
r28-31 202d662022246465 000000413edd88f0 000000413edd89a0 0000000000000001
sr00-03 000000000532c000 0000000000000000 0000000000000000 000000000532c000
sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000401fe42c 00000000401fe430
IIR: 539c0030 ISR: 00000000202d6000 IOR: 000006202224647d
CPU: 3 CR30: 000000413edd8000 CR31: 0000000000000000
ORIG_R28: 00000000405a95e0
IAOQ[0]: vma_interval_tree_iter_first+0x14/0x48
IAOQ[1]: vma_interval_tree_iter_first+0x18/0x48
RP(r2): flush_dcache_page+0x128/0x388
Backtrace:
flush_dcache_page+0x128/0x388
lo_splice_actor+0x90/0x148 [loop]
splice_from_pipe_feed+0xc0/0x1d0
__splice_from_pipe+0xac/0xc0
lo_direct_splice_actor+0x1c/0x70 [loop]
splice_direct_to_actor+0xec/0x228
lo_receive+0xe4/0x298 [loop]
loop_thread+0x478/0x640 [loop]
kthread+0x134/0x168
end_fault_vector+0x20/0x28
xfs_setsize_buftarg+0x0/0x90 [xfs]
Kernel panic - not syncing: Bad Address (null pointer deref?)
Commit 8456a648cf44 changes the page structure so that the slab
subsystem reuses the page->mapping field.
The crash happens in the following way:
* XFS allocates some memory from slab and issues a bio to read data
into it.
* the bio is sent to the loopback device.
* lo_receive creates an actor and calls splice_direct_to_actor.
* lo_splice_actor copies data to the target page.
* lo_splice_actor calls flush_dcache_page because the page may be
mapped by userspace. In that case we need to flush the kernel cache.
* flush_dcache_page asks for the list of userspace mappings, however
that page->mapping field is reused by the slab subsystem for a
different purpose. This causes the crash.
Note that other architectures without coherent caches (sparc, arm, mips)
also call page_mapping from flush_dcache_page, so they may crash in the
same way.
This patch fixes this bug by testing if the page is a slab page in
page_mapping and returning NULL if it is.
The patch also fixes VM_BUG_ON(PageSlab(page)) that could happen in
earlier kernels in the same scenario on architectures without cache
coherence when CONFIG_DEBUG_VM is enabled - so it should be backported
to stable kernels.
In the old kernels, the function page_mapping is placed in
include/linux/mm.h, so you should modify the patch accordingly when
backporting it.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: John David Anglin <[email protected]>]
Cc: Andi Kleen <[email protected]>
Cc: Christoph Lameter <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Reviewed-by: Joonsoo Kim <[email protected]>
Cc: Helge Deller <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/util.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/mm/util.c b/mm/util.c
index 7441c41..0ae6760 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -387,7 +387,10 @@ struct address_space *page_mapping(struct page *page)
{
struct address_space *mapping = page->mapping;
- VM_BUG_ON(PageSlab(page));
+ /* This happens if someone calls flush_dcache_page on slab page */
+ if (unlikely(PageSlab(page)))
+ return NULL;
+
#ifdef CONFIG_SWAP
if (unlikely(PageSwapCache(page))) {
swp_entry_t entry;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Rohner <[email protected]>
commit 70f2fe3a26248724d8a5019681a869abdaf3e89a upstream.
There is a bug in the function nilfs_segctor_collect, which results in
active data being written to a segment, that is marked as clean. It is
possible, that this segment is selected for a later segment
construction, whereby the old data is overwritten.
The problem shows itself with the following kernel log message:
nilfs_sufile_do_cancel_free: segment 6533 must be clean
Usually a few hours later the file system gets corrupted:
NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0
NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660)
The issue can be reproduced with a file system that is nearly full and
with the cleaner running, while some IO intensive task is running.
Although it is quite hard to reproduce.
This is what happens:
1. The cleaner starts the segment construction
2. nilfs_segctor_collect is called
3. sc_stage is on NILFS_ST_SUFILE and segments are freed
4. sc_stage is on NILFS_ST_DAT current segment is full
5. nilfs_segctor_extend_segments is called, which
allocates a new segment
6. The new segment is one of the segments freed in step 3
7. nilfs_sufile_cancel_freev is called and produces an error message
8. Loop around and the collection starts again
9. sc_stage is on NILFS_ST_SUFILE and segments are freed
including the newly allocated segment, which will contain active
data and can be allocated at a later time
10. A few hours later another segment construction allocates the
segment and causes file system corruption
This can be prevented by simply reordering the statements. If
nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments
the freed segments are marked as dirty and cannot be allocated any more.
Signed-off-by: Andreas Rohner <[email protected]>
Reviewed-by: Ryusuke Konishi <[email protected]>
Tested-by: Andreas Rohner <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/nilfs2/segment.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 9f6b486..a1a1916 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1440,17 +1440,19 @@ static int nilfs_segctor_collect(struct nilfs_sc_info *sci,
nilfs_clear_logs(&sci->sc_segbufs);
- err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
- if (unlikely(err))
- return err;
-
if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
err = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
sci->sc_freesegs,
sci->sc_nfreesegs,
NULL);
WARN_ON(err); /* do not happen */
+ sci->sc_stage.flags &= ~NILFS_CF_SUFREED;
}
+
+ err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
+ if (unlikely(err))
+ return err;
+
nadd = min_t(int, nadd << 1, SC_MAX_SEGDELTA);
sci->sc_stage = prev_stage;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Robert Richter <[email protected]>
commit bee09ed91cacdbffdbcd3b05de8409c77ec9fcd6 upstream.
On AMD family 10h we see following error messages while waking up from
S3 for all non-boot CPUs leading to a failed IBS initialization:
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
process: Switch to broadcast mode on CPU1
CPU1 is up
...
ACPI: Waking up from system sleep state S3
Reason for this is that during suspend the LVT offset for the IBS
vector gets lost and needs to be reinialized while resuming.
The offset is read from the IBSCTL msr. On family 10h the offset needs
to be 1 as offset 0 is used for the MCE threshold interrupt, but
firmware assings it for IBS to 0 too. The kernel needs to reprogram
the vector. The msr is a readonly node msr, but a new value can be
written via pci config space access. The reinitialization is
implemented for family 10h in setup_ibs_ctl() which is forced during
IBS setup.
This patch fixes IBS setup after waking up from S3 by adding
resume/supend hooks for the boot cpu which does the offset
reinitialization.
Marking it as stable to let distros pick up this fix.
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/x86/kernel/cpu/perf_event_amd_ibs.c | 53 +++++++++++++++++++++++++++-----
1 file changed, 45 insertions(+), 8 deletions(-)
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index e09f0bf..4b8e4d3 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ptrace.h>
+#include <linux/syscore_ops.h>
#include <asm/apic.h>
@@ -816,6 +817,18 @@ out:
return ret;
}
+static void ibs_eilvt_setup(void)
+{
+ /*
+ * Force LVT offset assignment for family 10h: The offsets are
+ * not assigned by the BIOS for this family, so the OS is
+ * responsible for doing it. If the OS assignment fails, fall
+ * back to BIOS settings and try to setup this.
+ */
+ if (boot_cpu_data.x86 == 0x10)
+ force_ibs_eilvt_setup();
+}
+
static inline int get_ibs_lvt_offset(void)
{
u64 val;
@@ -851,6 +864,36 @@ static void clear_APIC_ibs(void *dummy)
setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_FIX, 1);
}
+#ifdef CONFIG_PM
+
+static int perf_ibs_suspend(void)
+{
+ clear_APIC_ibs(NULL);
+ return 0;
+}
+
+static void perf_ibs_resume(void)
+{
+ ibs_eilvt_setup();
+ setup_APIC_ibs(NULL);
+}
+
+static struct syscore_ops perf_ibs_syscore_ops = {
+ .resume = perf_ibs_resume,
+ .suspend = perf_ibs_suspend,
+};
+
+static void perf_ibs_pm_init(void)
+{
+ register_syscore_ops(&perf_ibs_syscore_ops);
+}
+
+#else
+
+static inline void perf_ibs_pm_init(void) { }
+
+#endif
+
static int
perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
{
@@ -877,18 +920,12 @@ static __init int amd_ibs_init(void)
if (!caps)
return -ENODEV; /* ibs not supported by the cpu */
- /*
- * Force LVT offset assignment for family 10h: The offsets are
- * not assigned by the BIOS for this family, so the OS is
- * responsible for doing it. If the OS assignment fails, fall
- * back to BIOS settings and try to setup this.
- */
- if (boot_cpu_data.x86 == 0x10)
- force_ibs_eilvt_setup();
+ ibs_eilvt_setup();
if (!ibs_eilvt_valid())
goto out;
+ perf_ibs_pm_init();
get_online_cpus();
ibs_caps = caps;
/* make ibs_caps visible to other cpus: */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Eric W. Biederman" <[email protected]>
commit f48cfddc6729ef133933062320039808bafa6f45 upstream.
Aditya Kali ([email protected]) wrote:
> Commit bf056bfa80596a5d14b26b17276a56a0dcb080e5:
> "proc: Fix the namespace inode permission checks." converted
> the namespace files into symlinks. The same commit changed
> the way namespace bind mounts appear in /proc/mounts:
> $ mount --bind /proc/self/ns/ipc /mnt/ipc
> Originally:
> $ cat /proc/mounts | grep ipc
> proc /mnt/ipc proc rw,nosuid,nodev,noexec 0 0
>
> After commit bf056bfa80596a5d14b26b17276a56a0dcb080e5:
> $ cat /proc/mounts | grep ipc
> proc ipc:[4026531839] proc rw,nosuid,nodev,noexec 0 0
>
> This breaks userspace which expects the 2nd field in
> /proc/mounts to be a valid path.
The symlink /proc/<pid>/ns/{ipc,mnt,net,pid,user,uts} point to
dentries allocated with d_alloc_pseudo that we can mount, and
that have interesting names printed out with d_dname.
When these files are bind mounted /proc/mounts is not currently
displaying the mount point correctly because d_dname is called instead
of just displaying the path where the file is mounted.
Solve this by adding an explicit check to distinguish mounted pseudo
inodes and unmounted pseudo inodes. Unmounted pseudo inodes always
use mount of their filesstem as the mnt_root in their path making
these two cases easy to distinguish.
Acked-by: Serge Hallyn <[email protected]>
Reported-by: Aditya Kali <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/dcache.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/dcache.c b/fs/dcache.c
index b949af8..2d1a5ea 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2675,8 +2675,13 @@ char *d_path(const struct path *path, char *buf, int buflen)
* thus don't need to be hashed. They also don't need a name until a
* user wants to identify the object in /proc/pid/fd/. The little hack
* below allows us to generate a name for these objects on demand:
+ *
+ * Some pseudo inodes are mountable. When they are mounted
+ * path->dentry == path->mnt->mnt_root. In that case don't call d_dname
+ * and instead have d_path return the mounted path.
*/
- if (path->dentry->d_op && path->dentry->d_op->d_dname)
+ if (path->dentry->d_op && path->dentry->d_op->d_dname &&
+ (!IS_ROOT(path->dentry) || path->dentry != path->mnt->mnt_root))
return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
get_fs_root(current->fs, &root);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jean Delvare <[email protected]>
commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream.
When the core number exceeds 9, the size of the buffer storing the
alarm attribute name is insufficient and the attribute name is
truncated. This causes libsensors to skip these attributes as the
truncated name is not recognized.
Reported-by: Andreas Hollmann <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/hwmon/coretemp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 2e5e2dc..f269b0a 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
#define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */
#define NUM_REAL_CORES 32 /* Number of Real cores per cpu */
-#define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */
+#define CORETEMP_NAME_LENGTH 19 /* String Length of attrs */
#define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */
#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)
#define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Bernd Schubert <[email protected]>
commit af73623f5f10eb3832c87a169b28f7df040a875b upstream.
Somehow older areca firmware versions have issues with
scsi_get_vpd_page() and a large buffer, the firmware
seems to crash and the scsi error-handler will start endless
recovery retries.
Limiting the buf-size to 64-bytes fixes this issue with older
firmware versions (<1.49 for my controller).
Fixes a regression with areca controllers and older firmware versions
introduced by commit: 66c28f97120e8a621afd5aa7a31c4b85c547d33d
Reported-by: Nix <[email protected]>
Tested-by: Nix <[email protected]>
Signed-off-by: Bernd Schubert <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/scsi/sd.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index a873795..23e0673 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2644,13 +2644,16 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
}
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
+ /* too large values might cause issues with arcmsr */
+ int vpd_buf_len = 64;
+
sdev->no_report_opcodes = 1;
/* Disable WRITE SAME if REPORT SUPPORTED OPERATION
* CODES is unsupported and the device has an ATA
* Information VPD page (SAT).
*/
- if (!scsi_get_vpd_page(sdev, 0x89, buffer, SD_BUF_SIZE))
+ if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len))
sdev->no_write_same = 1;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97 upstream.
If an array is started degraded, and then the missing device
is found it can be re-added and a minimal bitmap-based recovery
will bring it fully up-to-date.
If the array is read-only a recovery would not be allowed.
But also if the array is read-only and the missing device was
present very recently, then there could be no need for any
recovery at all, so we simply include the device in the read-only
array without any recovery.
However... if the missing device was removed a little longer ago
it could be missing some updates, but if a bitmap is present it will
be conditionally accepted pending a bitmap-based update. We don't
currently detect this case properly and will include that old
device into the read-only array with no recovery even though it really
needs a recovery.
This patch keeps track of whether a bitmap-based-recovery is really
needed or not in the new Bitmap_sync rdev flag. If that is set,
then the device will not be added to a read-only array.
Cc: Andrei Warkentin <[email protected]>
Fixes: d70ed2e4fafdbef0800e73942482bb075c21578b
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/md.c | 18 +++++++++++++++---
drivers/md/md.h | 3 +++
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index a7e8d32..c4b3364 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1119,6 +1119,7 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
rdev->raid_disk = -1;
clear_bit(Faulty, &rdev->flags);
clear_bit(In_sync, &rdev->flags);
+ clear_bit(Bitmap_sync, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
if (mddev->raid_disks == 0) {
@@ -1197,6 +1198,8 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
*/
if (ev1 < mddev->bitmap->events_cleared)
return 0;
+ if (ev1 < mddev->events)
+ set_bit(Bitmap_sync, &rdev->flags);
} else {
if (ev1 < mddev->events)
/* just a hot-add of a new device, leave raid_disk at -1 */
@@ -1605,6 +1608,7 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
rdev->raid_disk = -1;
clear_bit(Faulty, &rdev->flags);
clear_bit(In_sync, &rdev->flags);
+ clear_bit(Bitmap_sync, &rdev->flags);
clear_bit(WriteMostly, &rdev->flags);
if (mddev->raid_disks == 0) {
@@ -1687,6 +1691,8 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
*/
if (ev1 < mddev->bitmap->events_cleared)
return 0;
+ if (ev1 < mddev->events)
+ set_bit(Bitmap_sync, &rdev->flags);
} else {
if (ev1 < mddev->events)
/* just a hot-add of a new device, leave raid_disk at -1 */
@@ -2830,6 +2836,7 @@ slot_store(struct md_rdev *rdev, const char *buf, size_t len)
else
rdev->saved_raid_disk = -1;
clear_bit(In_sync, &rdev->flags);
+ clear_bit(Bitmap_sync, &rdev->flags);
err = rdev->mddev->pers->
hot_add_disk(rdev->mddev, rdev);
if (err) {
@@ -5770,6 +5777,7 @@ static int add_new_disk(struct mddev * mddev, mdu_disk_info_t *info)
info->raid_disk < mddev->raid_disks) {
rdev->raid_disk = info->raid_disk;
set_bit(In_sync, &rdev->flags);
+ clear_bit(Bitmap_sync, &rdev->flags);
} else
rdev->raid_disk = -1;
} else
@@ -7713,7 +7721,8 @@ static int remove_and_add_spares(struct mddev *mddev,
if (test_bit(Faulty, &rdev->flags))
continue;
if (mddev->ro &&
- rdev->saved_raid_disk < 0)
+ ! (rdev->saved_raid_disk >= 0 &&
+ !test_bit(Bitmap_sync, &rdev->flags)))
continue;
rdev->recovery_offset = 0;
@@ -7794,9 +7803,12 @@ void md_check_recovery(struct mddev *mddev)
* As we only add devices that are already in-sync,
* we can activate the spares immediately.
*/
- clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
remove_and_add_spares(mddev, NULL);
- mddev->pers->spare_active(mddev);
+ /* There is no thread, but we need to call
+ * ->spare_active and clear saved_raid_disk
+ */
+ md_reap_sync_thread(mddev);
+ clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
goto unlock;
}
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 20f02c0..fcac995 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -129,6 +129,9 @@ struct md_rdev {
enum flag_bits {
Faulty, /* device is known to have a fault */
In_sync, /* device is in_sync with rest of array */
+ Bitmap_sync, /* ..actually, not quite In_sync. Need a
+ * bitmap-based recovery to get fully in sync
+ */
Unmerged, /* device is being added to array and should
* be considerred for bvec_merge_fn but not
* yet for actual IO
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit b50c259e25d9260b9108dc0c2964c26e5ecbe1c1 upstream.
If we discover a bad block when reading we split the request and
potentially read some of it from a different device.
The code path of this has two bugs in RAID10.
1/ we get a spin_lock with _irq, but unlock without _irq!!
2/ The calculation of 'sectors_handled' is wrong, as can be clearly
seen by comparison with raid1.c
This leads to at least 2 warnings and a probable crash is a RAID10
ever had known bad blocks.
Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160
Reported-by: Damian Nowak <[email protected]>
URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/raid10.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 73dc8a3..cc9b777 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1319,7 +1319,7 @@ read_again:
/* Could not read all from this device, so we will
* need another r10_bio.
*/
- sectors_handled = (r10_bio->sectors + max_sectors
+ sectors_handled = (r10_bio->sector + max_sectors
- bio->bi_sector);
r10_bio->sectors = max_sectors;
spin_lock_irq(&conf->device_lock);
@@ -1327,7 +1327,7 @@ read_again:
bio->bi_phys_segments = 2;
else
bio->bi_phys_segments++;
- spin_unlock(&conf->device_lock);
+ spin_unlock_irq(&conf->device_lock);
/* Cannot call generic_make_request directly
* as that will be queued in __generic_make_request
* and subsequent mempool_alloc might block
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 1cc03eb93245e63b0b7a7832165efdc52e25b4e6 upstream.
commit 5d8c71f9e5fbdd95650be00294d238e27a363b5c
md: raid5 crash during degradation
Fixed a crash in an overly simplistic way which could leave
R5_WriteError or R5_MadeGood set in the stripe cache for devices
for which it is no longer relevant.
When those devices are removed and spares added the flags are still
set and can cause incorrect behaviour.
commit 14a75d3e07c784c004b4b44b34af996b8e4ac453
md/raid5: preferentially read from replacement device if possible.
Fixed the same bug if a more effective way, so we can now revert
the original commit.
Reported-and-tested-by: Alexander Lyakas <[email protected]>
Fixes: 5d8c71f9e5fbdd95650be00294d238e27a363b5c
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/raid5.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d825059..dce8be8 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3391,7 +3391,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
*/
set_bit(R5_Insync, &dev->flags);
- if (rdev && test_bit(R5_WriteError, &dev->flags)) {
+ if (test_bit(R5_WriteError, &dev->flags)) {
/* This flag does not apply to '.replacement'
* only to .rdev, so make sure to check that*/
struct md_rdev *rdev2 = rcu_dereference(
@@ -3404,7 +3404,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
} else
clear_bit(R5_WriteError, &dev->flags);
}
- if (rdev && test_bit(R5_MadeGood, &dev->flags)) {
+ if (test_bit(R5_MadeGood, &dev->flags)) {
/* This flag does not apply to '.replacement'
* only to .rdev, so make sure to check that*/
struct md_rdev *rdev2 = rcu_dereference(
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit f9b0e058cbd04ada76b13afffa7e1df830543c24 upstream.
Commit 4f8ad655dbc8 "writeback: Refactor writeback_single_inode()" added
a condition to skip clean inode. However this is wrong in WB_SYNC_ALL
mode because there we also want to wait for outstanding writeback on
possibly clean inode. This was causing occasional data corruption issues
on NFS because it uses sync_inode() to make sure all outstanding writes
are flushed to the server before truncating the inode and with
sync_inode() returning prematurely file was sometimes extended back
by an outstanding write after it was truncated.
So modify the test to also check for pages under writeback in
WB_SYNC_ALL mode.
Fixes: 4f8ad655dbc82cf05d2edc11e66b78a42d38bf93
Reported-and-tested-by: Dan Duval <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
fs/fs-writeback.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 68851ff..52e5934 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -508,13 +508,16 @@ writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
}
WARN_ON(inode->i_state & I_SYNC);
/*
- * Skip inode if it is clean. We don't want to mess with writeback
- * lists in this function since flusher thread may be doing for example
- * sync in parallel and if we move the inode, it could get skipped. So
- * here we make sure inode is on some writeback list and leave it there
- * unless we have completely cleaned the inode.
+ * Skip inode if it is clean and we have no outstanding writeback in
+ * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
+ * function since flusher thread may be doing for example sync in
+ * parallel and if we move the inode, it could get skipped. So here we
+ * make sure inode is on some writeback list and leave it there unless
+ * we have completely cleaned the inode.
*/
- if (!(inode->i_state & I_DIRTY))
+ if (!(inode->i_state & I_DIRTY) &&
+ (wbc->sync_mode != WB_SYNC_ALL ||
+ !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK)))
goto out;
inode->i_state |= I_SYNC;
spin_unlock(&inode->i_lock);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Zanoni <[email protected]>
commit 0882dae983707455e97479e5e904e37673517ebc upstream.
Properly zero the refcounts and crtc->ddi_pll_set so the previous HW
state doesn't affect the result of reading the current HW state.
This fixes WARNs about WRPLL refcount if we have an HDMI monitor on
HSW and then suspend/resume.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64379
Tested-by: Qingshuai Tian <[email protected]>
Signed-off-by: Paulo Zanoni <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/intel_ddi.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index e9af22a..029a165 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -978,12 +978,18 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
enum pipe pipe;
struct intel_crtc *intel_crtc;
+ dev_priv->ddi_plls.spll_refcount = 0;
+ dev_priv->ddi_plls.wrpll1_refcount = 0;
+ dev_priv->ddi_plls.wrpll2_refcount = 0;
+
for_each_pipe(pipe) {
intel_crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
- if (!intel_crtc->active)
+ if (!intel_crtc->active) {
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
continue;
+ }
intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
pipe);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <[email protected]>
commit 7ad228b11ec26a820291c9f5a1168d6176580dc1 upstream.
When the pipe A force quirk is applied the code will attempt to grab
a crtc mutex during intel_modeset_setup_hw_state(). If we're already
holding all crtc mutexes this will obviously deadlock every time.
So instead of using drm_modeset_lock_all() just grab the
mode_config.mutex. This is enough to avoid the unlocked mutex warnings
from certain lower level functions.
The regression was introduced in:
commit 027476642811f8559cbe00ef6cc54db230e48a20
Author: Ville Syrjälä <[email protected]>
Date: Mon Dec 2 11:08:06 2013 +0200
drm/i915: Take modeset locks around intel_modeset_setup_hw_state()
Signed-off-by: Ville Syrjälä <[email protected]>
[danvet: Add cc: stable since the offending commit has that, too.]
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/gpu/drm/i915/intel_display.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cfe124a..0e3f213 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9993,10 +9993,10 @@ void intel_modeset_gem_init(struct drm_device *dev)
intel_setup_overlay(dev);
- drm_modeset_lock_all(dev);
+ mutex_lock(&dev->mode_config.mutex);
drm_mode_config_reset(dev);
intel_modeset_setup_hw_state(dev, false);
- drm_modeset_unlock_all(dev);
+ mutex_unlock(&dev->mode_config.mutex);
}
void intel_modeset_cleanup(struct drm_device *dev)
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
commit 2690d97ade05c5325cbf7c72b94b90d265659886 upstream.
Commit 5901b6be885e attempted to introduce IPv6 support into
IRC NAT helper. By doing so, the following code seemed to be removed
by accident:
ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip);
sprintf(buffer, "%u %u", ip, port);
pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n", buffer, &ip, port);
This leads to the fact that buffer[] was left uninitialized and
contained some stack value. When we call nf_nat_mangle_tcp_packet(),
we call strlen(buffer) on excatly this uninitialized buffer. If we
are unlucky and the skb has enough tailroom, we overwrite resp. leak
contents with values that sit on our stack into the packet and send
that out to the receiver.
Since the rather informal DCC spec [1] does not seem to specify
IPv6 support right now, we log such occurences so that admins can
act accordingly, and drop the packet. I've looked into XChat source,
and IPv6 is not supported there: addresses are in u32 and print
via %u format string.
Therefore, restore old behaviour as in IPv4, use snprintf(). The
IRC helper does not support IPv6 by now. By this, we can safely use
strlen(buffer) in nf_nat_mangle_tcp_packet() and prevent a buffer
overflow. Also simplify some code as we now have ct variable anyway.
[1] http://www.irchelp.org/irchelp/rfc/ctcpspec.html
Fixes: 5901b6be885e ("netfilter: nf_nat: support IPv6 in IRC NAT helper")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Harald Welte <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/netfilter/nf_nat_irc.c | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/net/netfilter/nf_nat_irc.c b/net/netfilter/nf_nat_irc.c
index f02b360..1fb2258 100644
--- a/net/netfilter/nf_nat_irc.c
+++ b/net/netfilter/nf_nat_irc.c
@@ -34,10 +34,14 @@ static unsigned int help(struct sk_buff *skb,
struct nf_conntrack_expect *exp)
{
char buffer[sizeof("4294967296 65635")];
+ struct nf_conn *ct = exp->master;
+ union nf_inet_addr newaddr;
u_int16_t port;
unsigned int ret;
/* Reply comes from server. */
+ newaddr = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3;
+
exp->saved_proto.tcp.port = exp->tuple.dst.u.tcp.port;
exp->dir = IP_CT_DIR_REPLY;
exp->expectfn = nf_nat_follow_master;
@@ -57,17 +61,35 @@ static unsigned int help(struct sk_buff *skb,
}
if (port == 0) {
- nf_ct_helper_log(skb, exp->master, "all ports in use");
+ nf_ct_helper_log(skb, ct, "all ports in use");
return NF_DROP;
}
- ret = nf_nat_mangle_tcp_packet(skb, exp->master, ctinfo,
- protoff, matchoff, matchlen, buffer,
- strlen(buffer));
+ /* strlen("\1DCC CHAT chat AAAAAAAA P\1\n")=27
+ * strlen("\1DCC SCHAT chat AAAAAAAA P\1\n")=28
+ * strlen("\1DCC SEND F AAAAAAAA P S\1\n")=26
+ * strlen("\1DCC MOVE F AAAAAAAA P S\1\n")=26
+ * strlen("\1DCC TSEND F AAAAAAAA P S\1\n")=27
+ *
+ * AAAAAAAAA: bound addr (1.0.0.0==16777216, min 8 digits,
+ * 255.255.255.255==4294967296, 10 digits)
+ * P: bound port (min 1 d, max 5d (65635))
+ * F: filename (min 1 d )
+ * S: size (min 1 d )
+ * 0x01, \n: terminators
+ */
+ /* AAA = "us", ie. where server normally talks to. */
+ snprintf(buffer, sizeof(buffer), "%u %u", ntohl(newaddr.ip), port);
+ pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n",
+ buffer, &newaddr.ip, port);
+
+ ret = nf_nat_mangle_tcp_packet(skb, ct, ctinfo, protoff, matchoff,
+ matchlen, buffer, strlen(buffer));
if (ret != NF_ACCEPT) {
- nf_ct_helper_log(skb, exp->master, "cannot mangle packet");
+ nf_ct_helper_log(skb, ct, "cannot mangle packet");
nf_ct_unexpect_related(exp);
}
+
return ret;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Bresticker <[email protected]>
commit 97c3557c3e0413efb1f021f582d1459760e22727 upstream.
The gate clocks for the MFC sysmmus appear to be flipped, i.e.
GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr.
Fix this so that the MFC will start up.
Signed-off-by: Andrew Bresticker <[email protected]>
Signed-off-by: Sachin Kamat <[email protected]>
Acked-by: Mike Turquette <[email protected]>
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/clk/samsung/clk-exynos5250.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index ad9f97b..50c4e3d 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -326,8 +326,8 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0),
GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0),
GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
- GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
- GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
+ GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 2, 0, 0),
+ GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 1, 0, 0),
GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0),
GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <[email protected]>
commit 4f387323853c495ac589210832fad4503f75a0e7 upstream.
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better
handing of DMA masks for coherent allocations") added an additional
check to the coherent DMA mask that results in an error when the mask is
larger than what dma_addr_t can address.
Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix
the problem.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-shmobile/board-kzm9g.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1068120..66cac20 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -334,7 +334,7 @@ static struct platform_device lcdc_device = {
.resource = lcdc_resources,
.dev = {
.platform_data = &lcdc_info,
- .coherent_dma_mask = ~0,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Abhilash Kesavan <[email protected]>
commit 2feed5aecf5f367b92bd6b6e92afe9e3de466907 upstream.
The sysreg (system register) generates control signals for various blocks
like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused
clock at boot-up. This can lead to failures in operation of above blocks,
because they can not be configured properly if this clock is disabled.
Signed-off-by: Abhilash Kesavan <[email protected]>
Acked-by: Mike Turquette <[email protected]>
[t.figa: Updated patch description.]
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/clk/samsung/clk-exynos5250.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 6f767c5..ad9f97b 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -378,7 +378,8 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
GATE(hsi2c2, "hsi2c2", "aclk66", GATE_IP_PERIC, 30, 0, 0),
GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0),
GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0),
- GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0),
+ GATE(sysreg, "sysreg", "aclk66",
+ GATE_IP_PERIS, 1, CLK_IGNORE_UNUSED, 0),
GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, CLK_IGNORE_UNUSED, 0),
GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0),
GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0),
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <[email protected]>
commit dcd740b645003b866d7eb30d13d34d0729cce9db upstream.
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better
handing of DMA masks for coherent allocations") added an additional
check to the coherent DMA mask that results in an error when the mask is
larger than what dma_addr_t can address.
Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix
the problem.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/mach-shmobile/board-armadillo800eva.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index c5be60d..db474d1 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -438,7 +438,7 @@ static struct platform_device lcdc0_device = {
.id = 0,
.dev = {
.platform_data = &lcdc0_info,
- .coherent_dma_mask = ~0,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
@@ -535,7 +535,7 @@ static struct platform_device hdmi_lcdc_device = {
.id = 1,
.dev = {
.platform_data = &hdmi_lcdc_info,
- .coherent_dma_mask = ~0,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Seung-Woo Kim <[email protected]>
commit 5fdd1b56be51b1ec4dbde5b213d649ac717442da upstream.
The SRC_MFC register offset was incorrect, which could cause have caused
wrong calculation of rate of sclk_mfc clock, that could in turn lead to
incorrect operation of MFC. This patch corrects it.
Signed-off-by: Seung-Woo Kim <[email protected]>
Acked-by: Mike Turquette <[email protected]>
[t.figa: Updated patch description]
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/clk/samsung/clk-exynos4.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 4e57397..d068ae5 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -40,7 +40,7 @@
#define SRC_TOP1 0xc214
#define SRC_CAM 0xc220
#define SRC_TV 0xc224
-#define SRC_MFC 0xcc28
+#define SRC_MFC 0xc228
#define SRC_G3D 0xc22c
#define E4210_SRC_IMAGE 0xc230
#define SRC_LCD0 0xc234
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Abhilash Kesavan <[email protected]>
commit 8777539479abd7b3efeb691685415dc2b057d0e0 upstream.
Due to incorrect clock specified in MDMA0 node, using MDMA0 controller
could cause system failures, due to wrong clock being controlled. This
patch fixes this by specifying correct clock.
Signed-off-by: Abhilash Kesavan <[email protected]>
Acked-by: Mike Turquette <[email protected]>
[t.figa: Corrected commit message and description.]
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index ef57277..230ba1a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -543,7 +543,7 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
- clocks = <&clock 271>;
+ clocks = <&clock 346>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Weiner <[email protected]>
commit 96f1c58d853497a757463e0b57fed140d6858f3a upstream.
There is a race condition between a memcg being torn down and a swapin
triggered from a different memcg of a page that was recorded to belong
to the exiting memcg on swapout (with CONFIG_MEMCG_SWAP extension). The
result is unreclaimable pages pointing to dead memcgs, which can lead to
anything from endless loops in later memcg teardown (the page is charged
to all hierarchical parents but is not on any LRU list) or crashes from
following the dangling memcg pointer.
Memcgs with tasks in them can not be torn down and usually charges don't
show up in memcgs without tasks. Swapin with the CONFIG_MEMCG_SWAP
extension is the notable exception because it charges the cgroup that
was recorded as owner during swapout, which may be empty and in the
process of being torn down when a task in another memcg triggers the
swapin:
teardown: swapin:
lookup_swap_cgroup_id()
rcu_read_lock()
mem_cgroup_lookup()
css_tryget()
rcu_read_unlock()
disable css_tryget()
call_rcu()
offline_css()
reparent_charges()
res_counter_charge() (hierarchical!)
css_put()
css_free()
pc->mem_cgroup = dead memcg
add page to dead lru
Add a final reparenting step into css_free() to make sure any such raced
charges are moved out of the memcg before it's finally freed.
In the longer term it would be cleaner to have the css_tryget() and the
res_counter charge under the same RCU lock section so that the charge
reparenting is deferred until the last charge whose tryget succeeded is
visible. But this will require more invasive changes that will be
harder to evaluate and backport into stable, so better defer them to a
separate change set.
Signed-off-by: Johannes Weiner <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
mm/memcontrol.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 97f2550..b5f353f 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -6347,6 +6347,42 @@ static void mem_cgroup_css_offline(struct cgroup *cont)
static void mem_cgroup_css_free(struct cgroup *cont)
{
struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
+ /*
+ * XXX: css_offline() would be where we should reparent all
+ * memory to prepare the cgroup for destruction. However,
+ * memcg does not do css_tryget() and res_counter charging
+ * under the same RCU lock region, which means that charging
+ * could race with offlining. Offlining only happens to
+ * cgroups with no tasks in them but charges can show up
+ * without any tasks from the swapin path when the target
+ * memcg is looked up from the swapout record and not from the
+ * current task as it usually is. A race like this can leak
+ * charges and put pages with stale cgroup pointers into
+ * circulation:
+ *
+ * #0 #1
+ * lookup_swap_cgroup_id()
+ * rcu_read_lock()
+ * mem_cgroup_lookup()
+ * css_tryget()
+ * rcu_read_unlock()
+ * disable css_tryget()
+ * call_rcu()
+ * offline_css()
+ * reparent_charges()
+ * res_counter_charge()
+ * css_put()
+ * css_free()
+ * pc->mem_cgroup = dead memcg
+ * add page to lru
+ *
+ * The bulk of the charges are still moved in offline_css() to
+ * avoid pinning a lot of pages in case a long-term reference
+ * like a swapout record is deferring the css_free() to long
+ * after offlining. But this makes sure we catch any charges
+ * made after offlining:
+ */
+ mem_cgroup_reparent_charges(memcg);
memcg_destroy_kmem(memcg);
__mem_cgroup_free(memcg);
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Joe Thornber <[email protected]>
commit 020cc3b5e28c2e24f59f53a9154faf08564f308e upstream.
Rename commit_or_fallback() to commit(). Now all previous calls to
commit() will trigger the pool mode to fallback if the commit fails.
Also, check the error returned from commit() in alloc_data_block().
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/md/dm-thin.c | 36 +++++++++++++++---------------------
1 file changed, 15 insertions(+), 21 deletions(-)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 49ec256..38c8a5f 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -883,31 +883,23 @@ static void schedule_zero(struct thin_c *tc, dm_block_t virt_block,
}
}
-static int commit(struct pool *pool)
-{
- int r;
-
- r = dm_pool_commit_metadata(pool->pmd);
- if (r)
- DMERR_LIMIT("commit failed: error = %d", r);
-
- return r;
-}
-
/*
* A non-zero return indicates read_only or fail_io mode.
* Many callers don't care about the return value.
*/
-static int commit_or_fallback(struct pool *pool)
+static int commit(struct pool *pool)
{
int r;
if (get_pool_mode(pool) != PM_WRITE)
return -EINVAL;
- r = commit(pool);
- if (r)
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR_LIMIT("%s: dm_pool_commit_metadata failed: error = %d",
+ dm_device_name(pool->pool_md), r);
set_pool_mode(pool, PM_READ_ONLY);
+ }
return r;
}
@@ -940,7 +932,9 @@ static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
* Try to commit to see if that will free up some
* more space.
*/
- (void) commit_or_fallback(pool);
+ r = commit(pool);
+ if (r)
+ return r;
r = dm_pool_get_free_block_count(pool->pmd, &free_blocks);
if (r)
@@ -1350,7 +1344,7 @@ static void process_deferred_bios(struct pool *pool)
if (bio_list_empty(&bios) && !need_commit_due_to_time(pool))
return;
- if (commit_or_fallback(pool)) {
+ if (commit(pool)) {
while ((bio = bio_list_pop(&bios)))
bio_io_error(bio);
return;
@@ -2267,7 +2261,7 @@ static int pool_preresume(struct dm_target *ti)
return r;
if (need_commit1 || need_commit2)
- (void) commit_or_fallback(pool);
+ (void) commit(pool);
return 0;
}
@@ -2294,7 +2288,7 @@ static void pool_postsuspend(struct dm_target *ti)
cancel_delayed_work(&pool->waker);
flush_workqueue(pool->wq);
- (void) commit_or_fallback(pool);
+ (void) commit(pool);
}
static int check_arg_count(unsigned argc, unsigned args_required)
@@ -2428,7 +2422,7 @@ static int process_reserve_metadata_snap_mesg(unsigned argc, char **argv, struct
if (r)
return r;
- (void) commit_or_fallback(pool);
+ (void) commit(pool);
r = dm_pool_reserve_metadata_snap(pool->pmd);
if (r)
@@ -2490,7 +2484,7 @@ static int pool_message(struct dm_target *ti, unsigned argc, char **argv)
DMWARN("Unrecognised thin pool target message received: %s", argv[0]);
if (!r)
- (void) commit_or_fallback(pool);
+ (void) commit(pool);
return r;
}
@@ -2545,7 +2539,7 @@ static void pool_status(struct dm_target *ti, status_type_t type,
/* Commit to ensure statistics aren't out-of-date */
if (!(status_flags & DM_STATUS_NOFLUSH_FLAG) && !dm_suspended(ti))
- (void) commit_or_fallback(pool);
+ (void) commit(pool);
r = dm_pool_get_metadata_transaction_id(pool->pmd, &transaction_id);
if (r) {
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Rames <[email protected]>
commit 2ea4dc28a5bcec408e01a8772763871638a5ec79 upstream.
This disables PTP when we bring the interface down to avoid getting
unmatched RX timestamp events, and tries to re-enable it when bringing
the interface up.
[bwh: Make efx_ptp_stop() safe on Falcon. Introduce
efx_ptp_{start,stop}_datapath() functions; we'll expand them later.]
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <[email protected]>
[ luis: backported to 3.11:
- adjusted context
- added 'extern' to declarations in nic.h ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/sfc/efx.c | 4 ++++
drivers/net/ethernet/sfc/nic.h | 2 ++
drivers/net/ethernet/sfc/ptp.c | 30 +++++++++++++++++++++++++++---
3 files changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index c729688..b059ae8 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -695,6 +695,8 @@ static void efx_start_datapath(struct efx_nic *efx)
WARN_ON(channel->rx_pkt_n_frags);
}
+ efx_ptp_start_datapath(efx);
+
if (netif_device_present(efx->net_dev))
netif_tx_wake_all_queues(efx->net_dev);
}
@@ -710,6 +712,8 @@ static void efx_stop_datapath(struct efx_nic *efx)
EFX_ASSERT_RESET_SERIALISED(efx);
BUG_ON(efx->port_enabled);
+ efx_ptp_stop_datapath(efx);
+
/* Only perform flush if dma is enabled */
if (dev->is_busmaster && efx->state != STATE_RECOVERY) {
rc = efx_nic_flush_queues(efx);
diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h
index d63c299..22bc2ac 100644
--- a/drivers/net/ethernet/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
@@ -259,6 +259,8 @@ extern void efx_ptp_get_ts_info(struct efx_nic *efx,
extern bool efx_ptp_is_ptp_tx(struct efx_nic *efx, struct sk_buff *skb);
extern int efx_ptp_tx(struct efx_nic *efx, struct sk_buff *skb);
extern void efx_ptp_event(struct efx_nic *efx, efx_qword_t *ev);
+extern void efx_ptp_start_datapath(struct efx_nic *efx);
+extern void efx_ptp_stop_datapath(struct efx_nic *efx);
extern const struct efx_nic_type falcon_a1_nic_type;
extern const struct efx_nic_type falcon_b0_nic_type;
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index e7d7010..b24d3be 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -794,9 +794,14 @@ fail:
static int efx_ptp_stop(struct efx_nic *efx)
{
struct efx_ptp_data *ptp = efx->ptp_data;
- int rc = efx_ptp_disable(efx);
struct list_head *cursor;
struct list_head *next;
+ int rc;
+
+ if (ptp == NULL)
+ return 0;
+
+ rc = efx_ptp_disable(efx);
if (ptp->rxfilter_installed) {
efx_filter_remove_id_safe(efx, EFX_FILTER_PRI_REQUIRED,
@@ -821,6 +826,13 @@ static int efx_ptp_stop(struct efx_nic *efx)
return rc;
}
+static int efx_ptp_restart(struct efx_nic *efx)
+{
+ if (efx->ptp_data && efx->ptp_data->enabled)
+ return efx_ptp_start(efx);
+ return 0;
+}
+
static void efx_ptp_pps_worker(struct work_struct *work)
{
struct efx_ptp_data *ptp =
@@ -1118,7 +1130,7 @@ static int efx_ptp_change_mode(struct efx_nic *efx, bool enable_wanted,
{
if ((enable_wanted != efx->ptp_data->enabled) ||
(enable_wanted && (efx->ptp_data->mode != new_mode))) {
- int rc;
+ int rc = 0;
if (enable_wanted) {
/* Change of mode requires disable */
@@ -1135,7 +1147,8 @@ static int efx_ptp_change_mode(struct efx_nic *efx, bool enable_wanted,
* succeed.
*/
efx->ptp_data->mode = new_mode;
- rc = efx_ptp_start(efx);
+ if (netif_running(efx->net_dev))
+ rc = efx_ptp_start(efx);
if (rc == 0) {
rc = efx_ptp_synchronize(efx,
PTP_SYNC_ATTEMPTS * 2);
@@ -1508,3 +1521,14 @@ void efx_ptp_probe(struct efx_nic *efx)
efx->extra_channel_type[EFX_EXTRA_CHANNEL_PTP] =
&efx_ptp_channel_type;
}
+
+void efx_ptp_start_datapath(struct efx_nic *efx)
+{
+ if (efx_ptp_restart(efx))
+ netif_err(efx, drv, efx->net_dev, "Failed to restart PTP.\n");
+}
+
+void efx_ptp_stop_datapath(struct efx_nic *efx)
+{
+ efx_ptp_stop(efx);
+}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit cd6fe65e923175e4f2e9fb585b1d78c6bf580fc6 upstream.
There is a single MCDI PTP operation for setting the frequency
adjustment and applying a time offset to the hardware clock. When
applying a time offset we should not change the frequency adjustment.
These two operations can now be requested separately but this requires
a flash firmware update. Keep using the single operation, but
remember and repeat the previous frequency adjustment.
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <[email protected]>
[ luis: backported to 3.11:
- replaced MCDI_SET_QWORD() by 2x MCDI_SET_DWORD() ]
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index b24d3be..11d979d 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -1420,7 +1420,7 @@ static int efx_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
if (rc != 0)
return rc;
- ptp_data->current_adjfreq = delta;
+ ptp_data->current_adjfreq = adjustment_ns;
return 0;
}
@@ -1434,8 +1434,9 @@ static int efx_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
u8 inbuf[MC_CMD_PTP_IN_ADJUST_LEN];
MCDI_SET_DWORD(inbuf, PTP_IN_OP, MC_CMD_PTP_OP_ADJUST);
- MCDI_SET_DWORD(inbuf, PTP_IN_ADJUST_FREQ_LO, 0);
- MCDI_SET_DWORD(inbuf, PTP_IN_ADJUST_FREQ_HI, 0);
+ MCDI_SET_DWORD(inbuf, PTP_IN_ADJUST_FREQ_LO, (u32)ptp_data->current_adjfreq);
+ MCDI_SET_DWORD(inbuf, PTP_IN_ADJUST_FREQ_HI,
+ (u32)(ptp_data->current_adjfreq >> 32));
MCDI_SET_DWORD(inbuf, PTP_IN_ADJUST_SECONDS, (u32)delta_ts.tv_sec);
MCDI_SET_DWORD(inbuf, PTP_IN_ADJUST_NANOSECONDS, (u32)delta_ts.tv_nsec);
return efx_mcdi_rpc(efx, MC_CMD_PTP, inbuf, sizeof(inbuf),
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurence Evans <[email protected]>
commit f32116003c39f3a6815215a7512e1ea8d1e4bbc7 upstream.
Limit syslog flood if a PTP packet storm occurs.
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index 6ddec68..d5a5192 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -220,6 +220,7 @@ struct efx_ptp_timeset {
* @evt_list: List of MC receive events awaiting packets
* @evt_free_list: List of free events
* @evt_lock: Lock for manipulating evt_list and evt_free_list
+ * @evt_overflow: Boolean indicating that event list has overflowed
* @rx_evts: Instantiated events (on evt_list and evt_free_list)
* @workwq: Work queue for processing pending PTP operations
* @work: Work task
@@ -270,6 +271,7 @@ struct efx_ptp_data {
struct list_head evt_list;
struct list_head evt_free_list;
spinlock_t evt_lock;
+ bool evt_overflow;
struct efx_ptp_event_rx rx_evts[MAX_RECEIVE_EVENTS];
struct workqueue_struct *workwq;
struct work_struct work;
@@ -628,6 +630,11 @@ static void efx_ptp_drop_time_expired_events(struct efx_nic *efx)
}
}
}
+ /* If the event overflow flag is set and the event list is now empty
+ * clear the flag to re-enable the overflow warning message.
+ */
+ if (ptp->evt_overflow && list_empty(&ptp->evt_list))
+ ptp->evt_overflow = false;
spin_unlock_bh(&ptp->evt_lock);
}
@@ -669,6 +676,11 @@ static enum ptp_packet_state efx_ptp_match_rx(struct efx_nic *efx,
break;
}
}
+ /* If the event overflow flag is set and the event list is now empty
+ * clear the flag to re-enable the overflow warning message.
+ */
+ if (ptp->evt_overflow && list_empty(&ptp->evt_list))
+ ptp->evt_overflow = false;
spin_unlock_bh(&ptp->evt_lock);
return rc;
@@ -802,6 +814,7 @@ static int efx_ptp_stop(struct efx_nic *efx)
list_for_each_safe(cursor, next, &efx->ptp_data->evt_list) {
list_move(cursor, &efx->ptp_data->evt_free_list);
}
+ ptp->evt_overflow = false;
spin_unlock_bh(&efx->ptp_data->evt_lock);
return rc;
@@ -894,6 +907,7 @@ static int efx_ptp_probe_channel(struct efx_channel *channel)
spin_lock_init(&ptp->evt_lock);
for (pos = 0; pos < MAX_RECEIVE_EVENTS; pos++)
list_add(&ptp->rx_evts[pos].link, &ptp->evt_free_list);
+ ptp->evt_overflow = false;
ptp->phc_clock_info.owner = THIS_MODULE;
snprintf(ptp->phc_clock_info.name,
@@ -1292,8 +1306,13 @@ static void ptp_event_rx(struct efx_nic *efx, struct efx_ptp_data *ptp)
list_add_tail(&evt->link, &ptp->evt_list);
queue_work(ptp->workwq, &ptp->work);
- } else {
- netif_err(efx, rx_err, efx->net_dev, "No free PTP event");
+ } else if (!ptp->evt_overflow) {
+ /* Log a warning message and set the event overflow flag.
+ * The message won't be logged again until the event queue
+ * becomes empty.
+ */
+ netif_err(efx, rx_err, efx->net_dev, "PTP event queue overflow\n");
+ ptp->evt_overflow = true;
}
spin_unlock_bh(&ptp->evt_lock);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Pirko <[email protected]>
commit 859828c0ea476b42f3a93d69d117aaba90994b6f upstream.
br_stp_rcv() is reached by non-rx_handler path. That means there is no
guarantee that dev is bridge port and therefore simple NULL check of
->rx_handler_data is not enough. There is need to check if dev is really
bridge port and since only rcu read lock is held here, do it by checking
->rx_handler pointer.
Note that synchronize_net() in netdev_rx_handler_unregister() ensures
this approach as valid.
Introduced originally by:
commit f350a0a87374418635689471606454abc7beaa3a
"bridge: use rx_handler_data pointer to store net_bridge_port pointer"
Fixed but not in the best way by:
commit b5ed54e94d324f17c97852296d61a143f01b227a
"bridge: fix RCU races with bridge port"
Reintroduced by:
commit 716ec052d2280d511e10e90ad54a86f5b5d4dcc2
"bridge: fix NULL pointer deref of br_port_get_rcu"
Please apply to stable trees as well. Thanks.
RH bugzilla reference: https://bugzilla.redhat.com/show_bug.cgi?id=1025770
Reported-by: Laine Stump <[email protected]>
Debugged-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
net/bridge/br_private.h | 10 ++++++++++
net/bridge/br_stp_bpdu.c | 2 +-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index aa05bd8..a70bb90 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -452,6 +452,16 @@ extern netdev_features_t br_features_recompute(struct net_bridge *br,
extern int br_handle_frame_finish(struct sk_buff *skb);
extern rx_handler_result_t br_handle_frame(struct sk_buff **pskb);
+static inline bool br_rx_handler_check_rcu(const struct net_device *dev)
+{
+ return rcu_dereference(dev->rx_handler) == br_handle_frame;
+}
+
+static inline struct net_bridge_port *br_port_get_check_rcu(const struct net_device *dev)
+{
+ return br_rx_handler_check_rcu(dev) ? br_port_get_rcu(dev) : NULL;
+}
+
/* br_ioctl.c */
extern int br_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __user *arg);
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index 8660ea3..bdb459d 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -153,7 +153,7 @@ void br_stp_rcv(const struct stp_proto *proto, struct sk_buff *skb,
if (buf[0] != 0 || buf[1] != 0 || buf[2] != 0)
goto err;
- p = br_port_get_rcu(dev);
+ p = br_port_get_check_rcu(dev);
if (!p)
goto err;
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit 35f9a7a380728a94d417e5824a866f969423ac83 upstream.
In case of a flood of PTP packets, the timestamp peripheral and MC
firmware on the SFN[56]322F boards may not be able to provide
timestamp events for all packets. Don't complain too much about this.
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index d5a5192..e7d7010 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -710,8 +710,9 @@ static bool efx_ptp_process_events(struct efx_nic *efx, struct sk_buff_head *q)
__skb_queue_tail(q, skb);
} else if (time_after(jiffies, match->expiry)) {
match->state = PTP_PACKET_STATE_TIMED_OUT;
- netif_warn(efx, rx_err, efx->net_dev,
- "PTP packet - no timestamp seen\n");
+ if (net_ratelimit())
+ netif_warn(efx, rx_err, efx->net_dev,
+ "PTP packet - no timestamp seen\n");
__skb_queue_tail(q, skb);
} else {
/* Replace unprocessed entry and stop */
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
commit e5a498e943fbc497f236ab8cf31366c75f337ce6 upstream.
efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that
have invalid IPv4 and UDP headers.
Add checks that:
- the transport header has been found
- there is enough space between network and transport header offset
for an IPv4 header
- there is enough space after the transport header offset for a
UDP header
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index b495394..6ddec68 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -982,7 +982,11 @@ bool efx_ptp_is_ptp_tx(struct efx_nic *efx, struct sk_buff *skb)
skb->len >= PTP_MIN_LENGTH &&
skb->len <= MC_CMD_PTP_IN_TRANSMIT_PACKET_MAXNUM &&
likely(skb->protocol == htons(ETH_P_IP)) &&
+ skb_transport_header_was_set(skb) &&
+ skb_network_header_len(skb) >= sizeof(struct iphdr) &&
ip_hdr(skb)->protocol == IPPROTO_UDP &&
+ skb_headlen(skb) >=
+ skb_transport_offset(skb) + sizeof(struct udphdr) &&
udp_hdr(skb)->dest == htons(PTP_EVENT_PORT);
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
commit 37ec274e9713eafc2ba6c4471420f06cb8f68ecf upstream.
Signed-off-by: Eric Dumazet <[email protected]>
skb_tx_timestamp(skb) should be called _before_ TX completion
has a chance to trigger, otherwise it is too late and we access
freed memory.
Fixes: e4f2379db6c6 ("ethernet/arc/arc_emac - Add new driver")
From: Eric Dumazet <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
---
drivers/net/ethernet/arc/emac_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 9e16014..4fc96d6 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -565,6 +565,8 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev)
/* Make sure pointer to data buffer is set */
wmb();
+ skb_tx_timestamp(skb);
+
*info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len);
/* Increment index to point to the next BD */
@@ -579,8 +581,6 @@ static int arc_emac_tx(struct sk_buff *skb, struct net_device *ndev)
arc_reg_set(priv, R_STATUS, TXPL_MASK);
- skb_tx_timestamp(skb);
-
return NETDEV_TX_OK;
}
--
1.8.3.2
3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei-Chun Chao <[email protected]>
commit 7a7ffbabf99445704be01bff5d7e360da908cf8e upstream.
VM to VM GSO traffic is broken if it goes through VXLAN or GRE
tunnel and the physical NIC on the host supports hardware VXLAN/GRE
GSO offload (e.g. bnx2x and next-gen mlx4).
Two issues -
(VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with
SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header
integrity check fails in udp4_ufo_fragment if inner protocol is
TCP. Also gso_segs is calculated incorrectly using skb->len that
includes tunnel header. Fix: robust check should only be applied
to the inner packet.
(VXLAN & GRE) Once GSO header integrity check passes, NULL segs
is returned and the original skb is sent to hardware. However the
tunnel header is already pulled. Fix: tunnel header needs to be
restored so that hardware can perform GSO properly on the original
packet.
Signed-off-by: Wei-Chun Chao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[ luis: backported to 3.11: adjusted context ]
Signed-off-by: Luis Henriques <[email protected]>
---
include/linux/netdevice.h | 13 +++++++++++++
net/ipv4/gre_offload.c | 11 +++++++----
net/ipv4/udp.c | 6 +++++-
net/ipv4/udp_offload.c | 37 +++++++++++++++++++------------------
4 files changed, 44 insertions(+), 23 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 1ffe7d7..324521b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2879,6 +2879,19 @@ static inline void netif_set_gso_max_size(struct net_device *dev,
dev->gso_max_size = size;
}
+static inline void skb_gso_error_unwind(struct sk_buff *skb, __be16 protocol,
+ int pulled_hlen, u16 mac_offset,
+ int mac_len)
+{
+ skb->protocol = protocol;
+ skb->encapsulation = 1;
+ skb_push(skb, pulled_hlen);
+ skb_reset_transport_header(skb);
+ skb->mac_header = mac_offset;
+ skb->network_header = skb->mac_header + mac_len;
+ skb->mac_len = mac_len;
+}
+
static inline bool netif_is_bond_master(struct net_device *dev)
{
return dev->flags & IFF_MASTER && dev->priv_flags & IFF_BONDING;
diff --git a/net/ipv4/gre_offload.c b/net/ipv4/gre_offload.c
index 55e6bfb..db98705 100644
--- a/net/ipv4/gre_offload.c
+++ b/net/ipv4/gre_offload.c
@@ -28,6 +28,7 @@ static struct sk_buff *gre_gso_segment(struct sk_buff *skb,
netdev_features_t enc_features;
int ghl = GRE_HEADER_SECTION;
struct gre_base_hdr *greh;
+ u16 mac_offset = skb->mac_header;
int mac_len = skb->mac_len;
__be16 protocol = skb->protocol;
int tnl_hlen;
@@ -57,13 +58,13 @@ static struct sk_buff *gre_gso_segment(struct sk_buff *skb,
} else
csum = false;
+ if (unlikely(!pskb_may_pull(skb, ghl)))
+ goto out;
+
/* setup inner skb. */
skb->protocol = greh->protocol;
skb->encapsulation = 0;
- if (unlikely(!pskb_may_pull(skb, ghl)))
- goto out;
-
__skb_pull(skb, ghl);
skb_reset_mac_header(skb);
skb_set_network_header(skb, skb_inner_network_offset(skb));
@@ -72,8 +73,10 @@ static struct sk_buff *gre_gso_segment(struct sk_buff *skb,
/* segment inner packet. */
enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
segs = skb_mac_gso_segment(skb, enc_features);
- if (!segs || IS_ERR(segs))
+ if (!segs || IS_ERR(segs)) {
+ skb_gso_error_unwind(skb, protocol, ghl, mac_offset, mac_len);
goto out;
+ }
skb = segs;
tnl_hlen = skb_tnl_header_len(skb);
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index b30deb9..e85a25c 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2293,6 +2293,7 @@ struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb,
netdev_features_t features)
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
+ u16 mac_offset = skb->mac_header;
int mac_len = skb->mac_len;
int tnl_hlen = skb_inner_mac_header(skb) - skb_transport_header(skb);
__be16 protocol = skb->protocol;
@@ -2312,8 +2313,11 @@ struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb,
/* segment inner packet. */
enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
segs = skb_mac_gso_segment(skb, enc_features);
- if (!segs || IS_ERR(segs))
+ if (!segs || IS_ERR(segs)) {
+ skb_gso_error_unwind(skb, protocol, tnl_hlen, mac_offset,
+ mac_len);
goto out;
+ }
outer_hlen = skb_tnl_header_len(skb);
skb = segs;
diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index f35ecca..6b809e4 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -41,6 +41,14 @@ static struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb,
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
unsigned int mss;
+ int offset;
+ __wsum csum;
+
+ if (skb->encapsulation &&
+ skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) {
+ segs = skb_udp_tunnel_segment(skb, features);
+ goto out;
+ }
mss = skb_shinfo(skb)->gso_size;
if (unlikely(skb->len <= mss))
@@ -62,27 +70,20 @@ static struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb,
goto out;
}
+ /* Do software UFO. Complete and fill in the UDP checksum as
+ * HW cannot do checksum of UDP packets sent as multiple
+ * IP fragments.
+ */
+ offset = skb_checksum_start_offset(skb);
+ csum = skb_checksum(skb, offset, skb->len - offset, 0);
+ offset += skb->csum_offset;
+ *(__sum16 *)(skb->data + offset) = csum_fold(csum);
+ skb->ip_summed = CHECKSUM_NONE;
+
/* Fragment the skb. IP headers of the fragments are updated in
* inet_gso_segment()
*/
- if (skb->encapsulation && skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL)
- segs = skb_udp_tunnel_segment(skb, features);
- else {
- int offset;
- __wsum csum;
-
- /* Do software UFO. Complete and fill in the UDP checksum as
- * HW cannot do checksum of UDP packets sent as multiple
- * IP fragments.
- */
- offset = skb_checksum_start_offset(skb);
- csum = skb_checksum(skb, offset, skb->len - offset, 0);
- offset += skb->csum_offset;
- *(__sum16 *)(skb->data + offset) = csum_fold(csum);
- skb->ip_summed = CHECKSUM_NONE;
-
- segs = skb_segment(skb, features);
- }
+ segs = skb_segment(skb, features);
out:
return segs;
}
--
1.8.3.2
On Fri, Feb 07, 2014 at 12:58:47PM +0100, Levente Kurusa wrote:
> Hi,
>
> On 02/07/2014 12:47 PM, Luis Henriques wrote:
> > 3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
> > [...]
> >
> > +static int patch_nvhdmi(struct hda_codec *codec)
> > +{
> > + struct hdmi_spec *spec;
> > + int err;
> > +
> > + err = patch_generic_hdmi(codec);
> > + if (err)
> > + return err;
> > +
> > + spec = codec->spec;
> > +
> > + return 0;
> > +}
> > [...]
>
> Is it just me or is it that the 'spec' variable has no use?
This does seem a little bit odd indeed. I've picked the backport provided
by Stephen, which has been queued for the 3.10 and 3.12 stable kernels as
well. The original patch actually modifies the ops field in the hdmi_spec
struct, however this field doesn't exist in this kernel version.
Stephen, could you please comment? Since this is just a partial backport
of 611885bc963a ("ALSA: hda - hdmi: Disallow unsupported 2ch remapping on
NVIDIA codecs"), I'm assuming this is correct -- although the spec
variable could have been dropped.
Cheers,
--
Luis
On 02/07/2014 07:36 AM, Luis Henriques wrote:
> On Fri, Feb 07, 2014 at 12:58:47PM +0100, Levente Kurusa wrote:
>> Hi,
>>
>> On 02/07/2014 12:47 PM, Luis Henriques wrote:
>>> 3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
>>> [...]
>>>
>>> +static int patch_nvhdmi(struct hda_codec *codec)
>>> +{
>>> + struct hdmi_spec *spec;
>>> + int err;
>>> +
>>> + err = patch_generic_hdmi(codec);
>>> + if (err)
>>> + return err;
>>> +
>>> + spec = codec->spec;
>>> +
>>> + return 0;
>>> +}
>>> [...]
>>
>> Is it just me or is it that the 'spec' variable has no use?
>
> This does seem a little bit odd indeed. I've picked the backport provided
> by Stephen, which has been queued for the 3.10 and 3.12 stable kernels as
> well. The original patch actually modifies the ops field in the hdmi_spec
> struct, however this field doesn't exist in this kernel version.
>
> Stephen, could you please comment? Since this is just a partial backport
> of 611885bc963a ("ALSA: hda - hdmi: Disallow unsupported 2ch remapping on
> NVIDIA codecs"), I'm assuming this is correct -- although the spec
> variable could have been dropped.
The very next patch of mine to this file (in other stable releases)
makes use of the spec variable. I kept the addition of the spec variable
in this patch, even though it isn't used until the next patch, so that
it stayed as part of the backport of this patch which originally added
it, rather than moving it to the other patch I backported, and hence
mixing up multiple upstream patches in the same backported patch.
On Fri, Feb 07, 2014 at 09:20:57AM -0700, Stephen Warren wrote:
> On 02/07/2014 07:36 AM, Luis Henriques wrote:
> > On Fri, Feb 07, 2014 at 12:58:47PM +0100, Levente Kurusa wrote:
> >> Hi,
> >>
> >> On 02/07/2014 12:47 PM, Luis Henriques wrote:
> >>> 3.11.10.4 -stable review patch. If anyone has any objections, please let me know.
> >>> [...]
> >>>
> >>> +static int patch_nvhdmi(struct hda_codec *codec)
> >>> +{
> >>> + struct hdmi_spec *spec;
> >>> + int err;
> >>> +
> >>> + err = patch_generic_hdmi(codec);
> >>> + if (err)
> >>> + return err;
> >>> +
> >>> + spec = codec->spec;
> >>> +
> >>> + return 0;
> >>> +}
> >>> [...]
> >>
> >> Is it just me or is it that the 'spec' variable has no use?
> >
> > This does seem a little bit odd indeed. I've picked the backport provided
> > by Stephen, which has been queued for the 3.10 and 3.12 stable kernels as
> > well. The original patch actually modifies the ops field in the hdmi_spec
> > struct, however this field doesn't exist in this kernel version.
> >
> > Stephen, could you please comment? Since this is just a partial backport
> > of 611885bc963a ("ALSA: hda - hdmi: Disallow unsupported 2ch remapping on
> > NVIDIA codecs"), I'm assuming this is correct -- although the spec
> > variable could have been dropped.
>
> The very next patch of mine to this file (in other stable releases)
> makes use of the spec variable. I kept the addition of the spec variable
> in this patch, even though it isn't used until the next patch, so that
> it stayed as part of the backport of this patch which originally added
> it, rather than moving it to the other patch I backported, and hence
> mixing up multiple upstream patches in the same backported patch.
Doh! I've applied both of your two patches to the 3.11 kernel. And while
I first reviewed them, I've seen that detail and it made perfect sense ;)
Anyway, thank you for your clarification.
Cheers,
--
Luis