------------------------
NOTE
This is probably going to be the last 3.13.y kernel release. There
_might_ be one more after this, but given my travel schedule for the
next few weeks, don't count on it. Please move to the 3.14 kernel tree
as soon as possible.
------------------------
This is the start of the stable review cycle for the 3.13.10 release.
There are 65 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Apr 13 16:09:42 UTC 2014.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.13.10-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.13.10-rc1
Ard Biesheuvel <[email protected]>
crypto: ghash-clmulni-intel - use C implementation for setkey()
Finn Thain <[email protected]>
m68k: Skip futex_atomic_cmpxchg_inatomic() test
Heiko Carstens <[email protected]>
futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test
Vineet Gupta <[email protected]>
ARC: [nsimosci] Unbork console
Mischa Jonker <[email protected]>
ARC: [nsimosci] Change .dts to use generic 8250 UART
Mikulas Patocka <[email protected]>
powernow-k6: reorder frequencies
Mikulas Patocka <[email protected]>
powernow-k6: correctly initialize default parameters
Mikulas Patocka <[email protected]>
powernow-k6: disable cache when changing frequency
Sasha Levin <[email protected]>
rds: prevent dereference of a NULL device in rds_iw_laddr_check
Dan Carpenter <[email protected]>
isdnloop: several buffer overflows
YOSHIFUJI Hideaki <[email protected]>
isdnloop: Validate NUL-terminated strings from user.
Mike Rapoport <[email protected]>
net: vxlan: fix crash when interface is created with no group
Daniel Pieczko <[email protected]>
Call efx_set_channels() before efx->type->dimension_resources()
Wei Liu <[email protected]>
xen-netback: disable rogue vif in kthread context
Pablo Neira <[email protected]>
netlink: don't compare the nul-termination in nla_strcmp
Hannes Frederic Sowa <[email protected]>
ipv6: some ipv6 statistic counters failed to disable bh
Paul Durrant <[email protected]>
xen-netback: remove pointless clause from if statement
Eric Dumazet <[email protected]>
tcp: fix get_timewait4_sock() delay computation on 64bit
Michael S. Tsirkin <[email protected]>
vhost: validate vhost_get_vq_desc return value
Michael S. Tsirkin <[email protected]>
vhost: fix total length when packets are too short
Vlad Yasevich <[email protected]>
vlan: Set hard_header_len according to available acceleration
Oliver Neukum <[email protected]>
usbnet: include wait queue head in device structure
Jason Wang <[email protected]>
virtio-net: correct error handling of virtqueue_kick()
Vlad Yasevich <[email protected]>
tg3: Do not include vlan acceleration features in vlan_features
Pravin B Shelar <[email protected]>
ip_tunnel: Fix dst ref-count.
Erik Hugne <[email protected]>
tipc: fix spinlock recursion bug for failed subscriptions
Li RongQing <[email protected]>
netpoll: fix the skb check in pkt_is_ns
Nishanth Menon <[email protected]>
net: micrel : ks8851-ml: add vdd-supply support
Nicolas Dichtel <[email protected]>
ip6mr: fix mfc notification flags
Nicolas Dichtel <[email protected]>
ipmr: fix mfc notification flags
Nicolas Dichtel <[email protected]>
rtnetlink: fix fdb notification flags
Eric Dumazet <[email protected]>
tcp: syncookies: do not use getnstimeofday()
David Stevens <[email protected]>
vxlan: fix nonfunctional neigh_reduce()
David Stevens <[email protected]>
vxlan: fix potential NULL dereference in arp_reduce()
Bjørn Mork <[email protected]>
net: cdc_ncm: fix control message ordering
lucien <[email protected]>
ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly
Heiner Kallweit <[email protected]>
ipv6: Avoid unnecessary temporary addresses being generated
Stefan Wahren <[email protected]>
eth: fec: Fix lost promiscuous mode after reconnecting cable
dingtianhong <[email protected]>
bonding: set correct vlan id for alb xmit path
Matthew Leach <[email protected]>
net: socket: error on a negative msg_namelen
Linus Lüssing <[email protected]>
bridge: multicast: enable snooping on general queries only
Linus Lüssing <[email protected]>
bridge: multicast: add sanity check for general query destination
Eric Dumazet <[email protected]>
tcp: tcp_release_cb() should release socket ownership
Michael S. Tsirkin <[email protected]>
skbuff: skb_segment: orphan frags before copying
Michael S. Tsirkin <[email protected]>
skbuff: skb_segment: s/fskb/list_skb/
Michael S. Tsirkin <[email protected]>
skbuff: skb_segment: s/skb/head_skb/
Michael S. Tsirkin <[email protected]>
skbuff: skb_segment: s/skb_frag/frag/
Michael S. Tsirkin <[email protected]>
skbuff: skb_segment: s/frag/nskb_frag/
Peter Boström <[email protected]>
vlan: Set correct source MAC address with TX VLAN offload enabled
Annie Li <[email protected]>
Xen-netback: Fix issue caused by using gso_type wrongly
Eric Dumazet <[email protected]>
pkt_sched: fq: do not hold qdisc lock while allocating memory
Michael Chan <[email protected]>
bnx2: Fix shutdown sequence
Sabrina Dubroca <[email protected]>
ipv6: don't set DST_NOCOUNT for remotely added routes
Anton Nayshtut <[email protected]>
ipv6: Fix exthdrs offload registration.
Eric Dumazet <[email protected]>
net: unix: non blocking recvmsg() should not return -EINTR
Florian Westphal <[email protected]>
inet: frag: make sure forced eviction removes all frags
Erik Hugne <[email protected]>
tipc: don't log disabled tasklet handler errors
Erik Hugne <[email protected]>
tipc: fix memory leak during module removal
Erik Hugne <[email protected]>
tipc: drop subscriber connection id invalidation
Ying Xue <[email protected]>
tipc: fix connection refcount leak
Ying Xue <[email protected]>
tipc: allow connection shutdown callback to be invoked in advance
Linus Lüssing <[email protected]>
bridge: multicast: add sanity check for query source addresses
Daniel Borkmann <[email protected]>
net: sctp: fix skb leakage in COOKIE ECHO path of chunk->auth_chunk
Nikolay Aleksandrov <[email protected]>
net: fix for a race condition in the inet frag code
Paul Moore <[email protected]>
selinux: correctly label /proc inodes in use before the policy is loaded
-------------
Diffstat:
.../devicetree/bindings/net/micrel-ks8851.txt | 1 +
Makefile | 4 +-
arch/arc/boot/dts/nsimosci.dts | 12 +-
arch/arc/configs/nsimosci_defconfig | 1 +
arch/m68k/Kconfig | 1 +
arch/s390/Kconfig | 1 +
arch/x86/crypto/ghash-clmulni-intel_asm.S | 29 ----
arch/x86/crypto/ghash-clmulni-intel_glue.c | 14 +-
drivers/cpufreq/powernow-k6.c | 147 +++++++++++++++++----
drivers/isdn/isdnloop/isdnloop.c | 23 ++--
drivers/net/bonding/bond_alb.c | 2 +-
drivers/net/ethernet/broadcom/bnx2.c | 37 +++++-
drivers/net/ethernet/broadcom/bnx2.h | 5 +
drivers/net/ethernet/broadcom/tg3.c | 5 +-
drivers/net/ethernet/freescale/fec_main.c | 14 +-
drivers/net/ethernet/micrel/ks8851.c | 30 ++++-
drivers/net/ethernet/sfc/ef10.c | 7 +
drivers/net/ethernet/sfc/efx.c | 3 +-
drivers/net/usb/cdc_ncm.c | 48 ++++---
drivers/net/usb/usbnet.c | 33 +++--
drivers/net/virtio_net.c | 6 +-
drivers/net/vxlan.c | 136 ++++++++++++++++---
drivers/net/xen-netback/common.h | 5 +
drivers/net/xen-netback/interface.c | 11 ++
drivers/net/xen-netback/netback.c | 54 ++++----
drivers/vhost/net.c | 20 ++-
include/linux/futex.h | 4 +
include/linux/usb/cdc_ncm.h | 1 +
include/linux/usb/usbnet.h | 2 +-
include/net/sock.h | 5 +
include/net/tcp.h | 11 +-
init/Kconfig | 7 +
kernel/futex.c | 14 +-
lib/nlattr.c | 10 +-
net/8021q/vlan.c | 4 +-
net/8021q/vlan_dev.c | 6 +-
net/bridge/br_multicast.c | 33 ++++-
net/core/netpoll.c | 2 +-
net/core/rtnetlink.c | 10 +-
net/core/skbuff.c | 105 ++++++++-------
net/core/sock.c | 5 +-
net/ipv4/gre_demux.c | 8 ++
net/ipv4/inet_fragment.c | 5 +-
net/ipv4/ip_tunnel.c | 3 -
net/ipv4/ip_tunnel_core.c | 1 +
net/ipv4/ipmr.c | 13 +-
net/ipv4/tcp_ipv4.c | 2 +-
net/ipv4/tcp_output.c | 11 ++
net/ipv6/addrconf.c | 5 +-
net/ipv6/exthdrs_offload.c | 4 +-
net/ipv6/icmp.c | 2 +-
net/ipv6/ip6_output.c | 18 ++-
net/ipv6/ip6mr.c | 13 +-
net/ipv6/mcast.c | 11 +-
net/ipv6/ping.c | 4 +-
net/ipv6/route.c | 2 +-
net/rds/iw.c | 3 +-
net/sched/sch_fq.c | 28 ++--
net/sctp/sm_make_chunk.c | 4 +-
net/sctp/sm_statefuns.c | 5 -
net/socket.c | 4 +
net/tipc/config.c | 9 +-
net/tipc/handler.c | 1 -
net/tipc/name_table.c | 37 +++++-
net/tipc/server.c | 14 +-
net/tipc/subscr.c | 48 +++----
net/unix/af_unix.c | 17 ++-
security/selinux/hooks.c | 36 +++--
68 files changed, 815 insertions(+), 361 deletions(-)
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ard Biesheuvel <[email protected]>
commit 8ceee72808d1ae3fb191284afc2257a2be964725 upstream.
The GHASH setkey() function uses SSE registers but fails to call
kernel_fpu_begin()/kernel_fpu_end(). Instead of adding these calls, and
then having to deal with the restriction that they cannot be called from
interrupt context, move the setkey() implementation to the C domain.
Note that setkey() does not use any particular SSE features and is not
expected to become a performance bottleneck.
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: H. Peter Anvin <[email protected]>
Fixes: 0e1227d356e9b (crypto: ghash - Add PCLMULQDQ accelerated implementation)
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/crypto/ghash-clmulni-intel_asm.S | 29 -----------------------------
arch/x86/crypto/ghash-clmulni-intel_glue.c | 14 +++++++++++---
2 files changed, 11 insertions(+), 32 deletions(-)
--- a/arch/x86/crypto/ghash-clmulni-intel_asm.S
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -24,10 +24,6 @@
.align 16
.Lbswap_mask:
.octa 0x000102030405060708090a0b0c0d0e0f
-.Lpoly:
- .octa 0xc2000000000000000000000000000001
-.Ltwo_one:
- .octa 0x00000001000000000000000000000001
#define DATA %xmm0
#define SHASH %xmm1
@@ -134,28 +130,3 @@ ENTRY(clmul_ghash_update)
.Lupdate_just_ret:
ret
ENDPROC(clmul_ghash_update)
-
-/*
- * void clmul_ghash_setkey(be128 *shash, const u8 *key);
- *
- * Calculate hash_key << 1 mod poly
- */
-ENTRY(clmul_ghash_setkey)
- movaps .Lbswap_mask, BSWAP
- movups (%rsi), %xmm0
- PSHUFB_XMM BSWAP %xmm0
- movaps %xmm0, %xmm1
- psllq $1, %xmm0
- psrlq $63, %xmm1
- movaps %xmm1, %xmm2
- pslldq $8, %xmm1
- psrldq $8, %xmm2
- por %xmm1, %xmm0
- # reduction
- pshufd $0b00100100, %xmm2, %xmm1
- pcmpeqd .Ltwo_one, %xmm1
- pand .Lpoly, %xmm1
- pxor %xmm1, %xmm0
- movups %xmm0, (%rdi)
- ret
-ENDPROC(clmul_ghash_setkey)
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -30,8 +30,6 @@ void clmul_ghash_mul(char *dst, const be
void clmul_ghash_update(char *dst, const char *src, unsigned int srclen,
const be128 *shash);
-void clmul_ghash_setkey(be128 *shash, const u8 *key);
-
struct ghash_async_ctx {
struct cryptd_ahash *cryptd_tfm;
};
@@ -58,13 +56,23 @@ static int ghash_setkey(struct crypto_sh
const u8 *key, unsigned int keylen)
{
struct ghash_ctx *ctx = crypto_shash_ctx(tfm);
+ be128 *x = (be128 *)key;
+ u64 a, b;
if (keylen != GHASH_BLOCK_SIZE) {
crypto_shash_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
return -EINVAL;
}
- clmul_ghash_setkey(&ctx->shash, key);
+ /* perform multiplication by 'x' in GF(2^128) */
+ a = be64_to_cpu(x->a);
+ b = be64_to_cpu(x->b);
+
+ ctx->shash.a = (__be64)((b << 1) | (a >> 63));
+ ctx->shash.b = (__be64)((a << 1) | (b >> 63));
+
+ if (a >> 63)
+ ctx->shash.b ^= cpu_to_be64(0xc2);
return 0;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit ecab67015ef6e3f3635551dcc9971cf363cc1cd5 ]
tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore
age needs to be added to the condition.
Age calculation in ipv6_create_tempaddr is different from the one
in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS.
This can cause age in ipv6_create_tempaddr to be less than the one
in addrconf_verify and therefore unnecessary temporary address to
be generated.
Use age calculation as in addrconf_modify to avoid this.
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/addrconf.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1078,8 +1078,11 @@ retry:
* Lifetime is greater than REGEN_ADVANCE time units. In particular,
* an implementation must not create a temporary address with a zero
* Preferred Lifetime.
+ * Use age calculation as in addrconf_verify to avoid unnecessary
+ * temporary addresses being generated.
*/
- if (tmp_prefered_lft <= regen_advance) {
+ age = (now - tmp_tstamp + ADDRCONF_TIMER_FUZZ_MINUS) / HZ;
+ if (tmp_prefered_lft <= regen_advance + age) {
in6_ifa_put(ifp);
in6_dev_put(idev);
ret = -1;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vineet Gupta <[email protected]>
commit 61fb4bfc010b0d2940f7fd87acbce6a0f03217cb upstream.
Despite the switch to right UART driver (prev patch), serial console
still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM
Also fix the default cmdline in DT to not refer to out-of-tree
ARC framebuffer driver for console.
Signed-off-by: Vineet Gupta <[email protected]>
Cc: Francois Bedard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/boot/dts/nsimosci.dts | 5 ++++-
arch/arc/configs/nsimosci_defconfig | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -17,7 +17,10 @@
interrupt-parent = <&intc>;
chosen {
- bootargs = "console=tty0 consoleblank=0";
+ /* this is for console on PGU */
+ /* bootargs = "console=tty0 consoleblank=0"; */
+ /* this is for console on serial */
+ bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
};
aliases {
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -54,6 +54,7 @@ CONFIG_SERIO_ARC_PS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
commit 03b8c7b623c80af264c4c8d6111e5c6289933666 upstream.
If an architecture has futex_atomic_cmpxchg_inatomic() implemented and there
is no runtime check necessary, allow to skip the test within futex_init().
This allows to get rid of some code which would always give the same result,
and also allows the compiler to optimize a couple of if statements away.
Signed-off-by: Heiko Carstens <[email protected]>
Cc: Finn Thain <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Link: http://lkml.kernel.org/r/20140302120947.GA3641@osiris
Signed-off-by: Thomas Gleixner <[email protected]>
[geert: Backported to v3.10..v3.13]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/Kconfig | 1 +
include/linux/futex.h | 4 ++++
init/Kconfig | 7 +++++++
kernel/futex.c | 14 ++++++++++++--
4 files changed, 24 insertions(+), 2 deletions(-)
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -117,6 +117,7 @@ config S390
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -55,7 +55,11 @@ union futex_key {
#ifdef CONFIG_FUTEX
extern void exit_robust_list(struct task_struct *curr);
extern void exit_pi_state_list(struct task_struct *curr);
+#ifdef CONFIG_HAVE_FUTEX_CMPXCHG
+#define futex_cmpxchg_enabled 1
+#else
extern int futex_cmpxchg_enabled;
+#endif
#else
static inline void exit_robust_list(struct task_struct *curr)
{
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1399,6 +1399,13 @@ config FUTEX
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
+config HAVE_FUTEX_CMPXCHG
+ bool
+ help
+ Architectures should select this if futex_atomic_cmpxchg_inatomic()
+ is implemented and always working. This removes a couple of runtime
+ checks.
+
config EPOLL
bool "Enable eventpoll support" if EXPERT
default y
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -68,7 +68,9 @@
#include "locking/rtmutex_common.h"
+#ifndef CONFIG_HAVE_FUTEX_CMPXCHG
int __read_mostly futex_cmpxchg_enabled;
+#endif
#define FUTEX_HASHBITS (CONFIG_BASE_SMALL ? 4 : 8)
@@ -2731,10 +2733,10 @@ SYSCALL_DEFINE6(futex, u32 __user *, uad
return do_futex(uaddr, op, val, tp, uaddr2, val2, val3);
}
-static int __init futex_init(void)
+static void __init futex_detect_cmpxchg(void)
{
+#ifndef CONFIG_HAVE_FUTEX_CMPXCHG
u32 curval;
- int i;
/*
* This will fail and we want it. Some arch implementations do
@@ -2748,6 +2750,14 @@ static int __init futex_init(void)
*/
if (cmpxchg_futex_value_locked(&curval, NULL, 0, 0) == -EFAULT)
futex_cmpxchg_enabled = 1;
+#endif
+}
+
+static int __init futex_init(void)
+{
+ int i;
+
+ futex_detect_cmpxchg();
for (i = 0; i < ARRAY_SIZE(futex_queues); i++) {
plist_head_init(&futex_queues[i].chain);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Finn Thain <[email protected]>
commit e571c58f313d35c56e0018470e3375ddd1fd320e upstream.
Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a
fatal exception on 68030 (and presumably 68020 also).
Signed-off-by: Finn Thain <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/m68k/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -17,6 +17,7 @@ config M68K
select FPU if MMU
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
+ select HAVE_FUTEX_CMPXCHG if MMU && FUTEX
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_REL
select MODULES_USE_ELF_RELA
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Liu <[email protected]>
[ Upstream commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d ]
When netback discovers frontend is sending malformed packet it will
disables the interface which serves that frontend.
However disabling a network interface involving taking a mutex which
cannot be done in softirq context, so we need to defer this process to
kthread context.
This patch does the following:
1. introduce a flag to indicate the interface is disabled.
2. check that flag in TX path, don't do any work if it's true.
3. check that flag in RX path, turn off that interface if it's true.
The reason to disable it in RX path is because RX uses kthread. After
this change the behavior of netback is still consistent -- it won't do
any TX work for a rogue frontend, and the interface will be eventually
turned off.
Also change a "continue" to "break" after xenvif_fatal_tx_err, as it
doesn't make sense to continue processing packets if frontend is rogue.
This is a fix for XSA-90.
Reported-by: Török Edwin <[email protected]>
Signed-off-by: Wei Liu <[email protected]>
Cc: Ian Campbell <[email protected]>
Reviewed-by: David Vrabel <[email protected]>
Acked-by: Ian Campbell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/common.h | 5 +++++
drivers/net/xen-netback/interface.c | 11 +++++++++++
drivers/net/xen-netback/netback.c | 16 ++++++++++++++--
3 files changed, 30 insertions(+), 2 deletions(-)
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -113,6 +113,11 @@ struct xenvif {
domid_t domid;
unsigned int handle;
+ /* Is this interface disabled? True when backend discovers
+ * frontend is rogue.
+ */
+ bool disabled;
+
/* Use NAPI for guest TX */
struct napi_struct napi;
/* When feature-split-event-channels = 0, tx_irq = rx_irq. */
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -67,6 +67,15 @@ static int xenvif_poll(struct napi_struc
struct xenvif *vif = container_of(napi, struct xenvif, napi);
int work_done;
+ /* This vif is rogue, we pretend we've there is nothing to do
+ * for this vif to deschedule it from NAPI. But this interface
+ * will be turned off in thread context later.
+ */
+ if (unlikely(vif->disabled)) {
+ napi_complete(napi);
+ return 0;
+ }
+
work_done = xenvif_tx_action(vif, budget);
if (work_done < budget) {
@@ -323,6 +332,8 @@ struct xenvif *xenvif_alloc(struct devic
vif->ip_csum = 1;
vif->dev = dev;
+ vif->disabled = false;
+
vif->credit_bytes = vif->remaining_credit = ~0UL;
vif->credit_usec = 0UL;
init_timer(&vif->credit_timeout);
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -752,7 +752,8 @@ static void xenvif_tx_err(struct xenvif
static void xenvif_fatal_tx_err(struct xenvif *vif)
{
netdev_err(vif->dev, "fatal error; disabling device\n");
- xenvif_carrier_off(vif);
+ vif->disabled = true;
+ xenvif_kick_thread(vif);
}
static int xenvif_count_requests(struct xenvif *vif,
@@ -1479,7 +1480,7 @@ static unsigned xenvif_tx_build_gops(str
vif->tx.sring->req_prod, vif->tx.req_cons,
XEN_NETIF_TX_RING_SIZE);
xenvif_fatal_tx_err(vif);
- continue;
+ break;
}
work_to_do = RING_HAS_UNCONSUMED_REQUESTS(&vif->tx);
@@ -1873,7 +1874,18 @@ int xenvif_kthread(void *data)
while (!kthread_should_stop()) {
wait_event_interruptible(vif->wq,
rx_work_todo(vif) ||
+ vif->disabled ||
kthread_should_stop());
+
+ /* This frontend is found to be rogue, disable it in
+ * kthread context. Currently this is only set when
+ * netback finds out frontend sends malformed packet,
+ * but we cannot disable the interface in softirq
+ * context so we defer it here.
+ */
+ if (unlikely(vif->disabled && netif_carrier_ok(vif->dev)))
+ xenvif_carrier_off(vif);
+
if (kthread_should_stop())
break;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mischa Jonker <[email protected]>
commit 6eda477b3c54b8236868c8784e5e042ff14244f0 upstream.
The Synopsys APB DW UART has a couple of special features that are not
in the System C model. In 3.8, the 8250_dw driver didn't really use these
features, but from 3.9 onwards, the 8250_dw driver has become incompatible
with our model.
Signed-off-by: Mischa Jonker <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Cc: Francois Bedard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/boot/dts/nsimosci.dts | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -11,7 +11,7 @@
/ {
compatible = "snps,nsimosci";
- clock-frequency = <80000000>; /* 80 MHZ */
+ clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
@@ -44,15 +44,14 @@
};
uart0: serial@c0000000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "ns8250";
reg = <0xc0000000 0x2000>;
interrupts = <11>;
- #clock-frequency = <80000000>;
clock-frequency = <3686400>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
- status = "okay";
+ no-loopback-test = <1>;
};
pgu0: pgu@c9000000 {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 22c73795b101597051924556dce019385a1e2fa0 upstream.
This patch reorders reported frequencies from the highest to the lowest,
just like in other frequency drivers.
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/powernow-k6.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -37,17 +37,20 @@ MODULE_PARM_DESC(bus_frequency, "Bus fre
/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
static struct cpufreq_frequency_table clock_ratio[] = {
- {45, /* 000 -> 4.5x */ 0},
+ {60, /* 110 -> 6.0x */ 0},
+ {55, /* 011 -> 5.5x */ 0},
{50, /* 001 -> 5.0x */ 0},
+ {45, /* 000 -> 4.5x */ 0},
{40, /* 010 -> 4.0x */ 0},
- {55, /* 011 -> 5.5x */ 0},
- {20, /* 100 -> 2.0x */ 0},
- {30, /* 101 -> 3.0x */ 0},
- {60, /* 110 -> 6.0x */ 0},
{35, /* 111 -> 3.5x */ 0},
+ {30, /* 101 -> 3.0x */ 0},
+ {20, /* 100 -> 2.0x */ 0},
{0, CPUFREQ_TABLE_END}
};
+static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
+static const u8 register_to_index[8] = { 3, 2, 4, 1, 7, 6, 0, 5 };
+
static const struct {
unsigned freq;
unsigned mult;
@@ -91,7 +94,7 @@ static int powernow_k6_get_cpu_multiplie
local_irq_enable();
- return clock_ratio[(invalue >> 5)&7].driver_data;
+ return clock_ratio[register_to_index[(invalue >> 5)&7]].driver_data;
}
static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
@@ -111,7 +114,7 @@ static void powernow_k6_set_cpu_multipli
write_cr0(cr0 | X86_CR0_CD);
wbinvd();
- outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+ outvalue = (1<<12) | (1<<10) | (1<<9) | (index_to_register[best_i]<<5);
msrval = POWERNOW_IOPORT + 0x1;
wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit d82b922a4acc1781d368aceac2f9da43b038cab2 upstream.
The powernow-k6 driver used to read the initial multiplier from the
powernow register. However, there is a problem with this:
* If there was a frequency transition before, the multiplier read from the
register corresponds to the current multiplier.
* If there was no frequency transition since reset, the field in the
register always reads as zero, regardless of the current multiplier that
is set using switches on the mainboard and that the CPU is running at.
The zero value corresponds to multiplier 4.5, so as a consequence, the
powernow-k6 driver always assumes multiplier 4.5.
For example, if we have 550MHz CPU with bus frequency 100MHz and
multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5
and bus frequency is 122MHz. The powernow-k6 driver then sets the
multiplier to 4.5, underclocking the CPU to 450MHz, but reports the
current frequency as 550MHz.
There is no reliable way how to read the initial multiplier. I modified
the driver so that it contains a table of known frequencies (based on
parameters of existing CPUs and some common overclocking schemes) and sets
the multiplier according to the frequency. If the frequency is unknown
(because of unusual overclocking or underclocking), the user must supply
the bus speed and maximum multiplier as module parameters.
This patch should be backported to all stable kernels. If it doesn't
apply cleanly, change it, or ask me to change it.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/powernow-k6.c | 76 +++++++++++++++++++++++++++++++++++++++---
1 file changed, 72 insertions(+), 4 deletions(-)
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -26,6 +26,14 @@
static unsigned int busfreq; /* FSB, in 10 kHz */
static unsigned int max_multiplier;
+static unsigned int param_busfreq = 0;
+static unsigned int param_max_multiplier = 0;
+
+module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO);
+MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)");
+
+module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
static struct cpufreq_frequency_table clock_ratio[] = {
@@ -40,6 +48,27 @@ static struct cpufreq_frequency_table cl
{0, CPUFREQ_TABLE_END}
};
+static const struct {
+ unsigned freq;
+ unsigned mult;
+} usual_frequency_table[] = {
+ { 400000, 40 }, // 100 * 4
+ { 450000, 45 }, // 100 * 4.5
+ { 475000, 50 }, // 95 * 5
+ { 500000, 50 }, // 100 * 5
+ { 506250, 45 }, // 112.5 * 4.5
+ { 533500, 55 }, // 97 * 5.5
+ { 550000, 55 }, // 100 * 5.5
+ { 562500, 50 }, // 112.5 * 5
+ { 570000, 60 }, // 95 * 6
+ { 600000, 60 }, // 100 * 6
+ { 618750, 55 }, // 112.5 * 5.5
+ { 660000, 55 }, // 120 * 5.5
+ { 675000, 60 }, // 112.5 * 6
+ { 720000, 60 }, // 120 * 6
+};
+
+#define FREQ_RANGE 3000
/**
* powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
@@ -125,17 +154,56 @@ static int powernow_k6_target(struct cpu
return 0;
}
-
static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
{
unsigned int i, f;
+ unsigned khz;
if (policy->cpu != 0)
return -ENODEV;
- /* get frequencies */
- max_multiplier = powernow_k6_get_cpu_multiplier();
- busfreq = cpu_khz / max_multiplier;
+ max_multiplier = 0;
+ khz = cpu_khz;
+ for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) {
+ if (khz >= usual_frequency_table[i].freq - FREQ_RANGE &&
+ khz <= usual_frequency_table[i].freq + FREQ_RANGE) {
+ khz = usual_frequency_table[i].freq;
+ max_multiplier = usual_frequency_table[i].mult;
+ break;
+ }
+ }
+ if (param_max_multiplier) {
+ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (clock_ratio[i].driver_data == param_max_multiplier) {
+ max_multiplier = param_max_multiplier;
+ goto have_max_multiplier;
+ }
+ }
+ printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+ return -EINVAL;
+ }
+
+ if (!max_multiplier) {
+ printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
+ printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+ return -EOPNOTSUPP;
+ }
+
+have_max_multiplier:
+ param_max_multiplier = max_multiplier;
+
+ if (param_busfreq) {
+ if (param_busfreq >= 50000 && param_busfreq <= 150000) {
+ busfreq = param_busfreq / 10;
+ goto have_busfreq;
+ }
+ printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+ return -EINVAL;
+ }
+
+ busfreq = khz / max_multiplier;
+have_busfreq:
+ param_busfreq = busfreq * 10;
/* table init */
for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit e20e1d0ac02308e2211306fc67abcd0b2668fb8b upstream.
I found out that a system with k6-3+ processor is unstable during network
server load. The system locks up or the network card stops receiving. The
reason for the instability is the CPU frequency scaling.
During frequency transition the processor is in "EPM Stop Grant" state.
The documentation says that the processor doesn't respond to inquiry
requests in this state. Consequently, coherency of processor caches and
bus master devices is not maintained, causing the system instability.
This patch flushes the cache during frequency transition. It fixes the
instability.
Other minor changes:
* u64 invalue changed to unsigned long because the variable is 32-bit
* move the logic to set the multiplier to a separate function
powernow_k6_set_cpu_multiplier
* preserve lower 5 bits of the powernow port instead of 4 (the voltage
field has 5 bits)
* mask interrupts when reading the multiplier, so that the port is not
open during other activity (running other kernel code with the port open
shouldn't cause any misbehavior, but we should better be safe and keep
the port closed)
This patch should be backported to all stable kernels. If it doesn't
apply cleanly, change it, or ask me to change it.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/powernow-k6.c | 56 +++++++++++++++++++++++++++++-------------
1 file changed, 39 insertions(+), 17 deletions(-)
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -44,23 +44,58 @@ static struct cpufreq_frequency_table cl
/**
* powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
*
- * Returns the current setting of the frequency multiplier. Core clock
+ * Returns the current setting of the frequency multiplier. Core clock
* speed is frequency of the Front-Side Bus multiplied with this value.
*/
static int powernow_k6_get_cpu_multiplier(void)
{
- u64 invalue = 0;
+ unsigned long invalue = 0;
u32 msrval;
+ local_irq_disable();
+
msrval = POWERNOW_IOPORT + 0x1;
wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
invalue = inl(POWERNOW_IOPORT + 0x8);
msrval = POWERNOW_IOPORT + 0x0;
wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+ local_irq_enable();
+
return clock_ratio[(invalue >> 5)&7].driver_data;
}
+static void powernow_k6_set_cpu_multiplier(unsigned int best_i)
+{
+ unsigned long outvalue, invalue;
+ unsigned long msrval;
+ unsigned long cr0;
+
+ /* we now need to transform best_i to the BVC format, see AMD#23446 */
+
+ /*
+ * The processor doesn't respond to inquiry cycles while changing the
+ * frequency, so we must disable cache.
+ */
+ local_irq_disable();
+ cr0 = read_cr0();
+ write_cr0(cr0 | X86_CR0_CD);
+ wbinvd();
+
+ outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
+
+ msrval = POWERNOW_IOPORT + 0x1;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
+ invalue = inl(POWERNOW_IOPORT + 0x8);
+ invalue = invalue & 0x1f;
+ outvalue = outvalue | invalue;
+ outl(outvalue, (POWERNOW_IOPORT + 0x8));
+ msrval = POWERNOW_IOPORT + 0x0;
+ wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+
+ write_cr0(cr0);
+ local_irq_enable();
+}
/**
* powernow_k6_target - set the PowerNow! multiplier
@@ -71,8 +106,6 @@ static int powernow_k6_get_cpu_multiplie
static int powernow_k6_target(struct cpufreq_policy *policy,
unsigned int best_i)
{
- unsigned long outvalue = 0, invalue = 0;
- unsigned long msrval;
struct cpufreq_freqs freqs;
if (clock_ratio[best_i].driver_data > max_multiplier) {
@@ -85,18 +118,7 @@ static int powernow_k6_target(struct cpu
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
- /* we now need to transform best_i to the BVC format, see AMD#23446 */
-
- outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5);
-
- msrval = POWERNOW_IOPORT + 0x1;
- wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
- invalue = inl(POWERNOW_IOPORT + 0x8);
- invalue = invalue & 0xf;
- outvalue = outvalue | invalue;
- outl(outvalue , (POWERNOW_IOPORT + 0x8));
- msrval = POWERNOW_IOPORT + 0x0;
- wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */
+ powernow_k6_set_cpu_multiplier(best_i);
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
@@ -125,7 +147,7 @@ static int powernow_k6_cpu_init(struct c
}
/* cpuinfo and default policy values */
- policy->cpuinfo.transition_latency = 200000;
+ policy->cpuinfo.transition_latency = 500000;
return cpufreq_table_validate_and_show(policy, clock_ratio);
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sasha Levin <[email protected]>
[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ]
Binding might result in a NULL device which is later dereferenced
without checking.
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rds/iw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/rds/iw.c
+++ b/net/rds/iw.c
@@ -239,7 +239,8 @@ static int rds_iw_laddr_check(__be32 add
ret = rdma_bind_addr(cm_id, (struct sockaddr *)&sin);
/* due to this, we will claim to support IB devices unless we
check node_type. */
- if (ret || cm_id->device->node_type != RDMA_NODE_RNIC)
+ if (ret || !cm_id->device ||
+ cm_id->device->node_type != RDMA_NODE_RNIC)
ret = -EADDRNOTAVAIL;
rdsdebug("addr %pI4 ret %d node type %d\n",
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: YOSHIFUJI Hideaki <[email protected]>
[ Upstream commit 77bc6bed7121936bb2e019a8c336075f4c8eef62 ]
Return -EINVAL unless all of user-given strings are correctly
NUL-terminated.
Signed-off-by: YOSHIFUJI Hideaki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/isdnloop/isdnloop.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -1070,6 +1070,12 @@ isdnloop_start(isdnloop_card *card, isdn
return -EBUSY;
if (copy_from_user((char *) &sdef, (char *) sdefp, sizeof(sdef)))
return -EFAULT;
+
+ for (i = 0; i < 3; i++) {
+ if (!memchr(sdef.num[i], 0, sizeof(sdef.num[i])))
+ return -EINVAL;
+ }
+
spin_lock_irqsave(&card->isdnloop_lock, flags);
switch (sdef.ptype) {
case ISDN_PTYPE_EURO:
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
[ Upstream commit 7563487cbf865284dcd35e9ef5a95380da046737 ]
There are three buffer overflows addressed in this patch.
1) In isdnloop_fake_err() we add an 'E' to a 60 character string and
then copy it into a 60 character buffer. I have made the destination
buffer 64 characters and I'm changed the sprintf() to a snprintf().
2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60
character buffer so we have 54 characters. The ->eazlist[] is 11
characters long. I have modified the code to return if the source
buffer is too long.
3) In isdnloop_command() the cbuf[] array was 60 characters long but the
max length of the string then can be up to 79 characters. I made the
cbuf array 80 characters long and changed the sprintf() to snprintf().
I also removed the temporary "dial" buffer and changed it to use "p"
directly.
Unfortunately, we pass the "cbuf" string from isdnloop_command() to
isdnloop_writecmd() which truncates anything over 60 characters to make
it fit in card->omsg[]. (It can accept values up to 255 characters so
long as there is a '\n' character every 60 characters). For now I have
just fixed the memory corruption bug and left the other problems in this
driver alone.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/isdn/isdnloop/isdnloop.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -518,9 +518,9 @@ static isdnloop_stat isdnloop_cmd_table[
static void
isdnloop_fake_err(isdnloop_card *card)
{
- char buf[60];
+ char buf[64];
- sprintf(buf, "E%s", card->omsg);
+ snprintf(buf, sizeof(buf), "E%s", card->omsg);
isdnloop_fake(card, buf, -1);
isdnloop_fake(card, "NAK", -1);
}
@@ -903,6 +903,8 @@ isdnloop_parse_cmd(isdnloop_card *card)
case 7:
/* 0x;EAZ */
p += 3;
+ if (strlen(p) >= sizeof(card->eazlist[0]))
+ break;
strcpy(card->eazlist[ch - 1], p);
break;
case 8:
@@ -1133,7 +1135,7 @@ isdnloop_command(isdn_ctrl *c, isdnloop_
{
ulong a;
int i;
- char cbuf[60];
+ char cbuf[80];
isdn_ctrl cmd;
isdnloop_cdef cdef;
@@ -1198,7 +1200,6 @@ isdnloop_command(isdn_ctrl *c, isdnloop_
break;
if ((c->arg & 255) < ISDNLOOP_BCH) {
char *p;
- char dial[50];
char dcode[4];
a = c->arg;
@@ -1210,10 +1211,10 @@ isdnloop_command(isdn_ctrl *c, isdnloop_
} else
/* Normal Dial */
strcpy(dcode, "CAL");
- strcpy(dial, p);
- sprintf(cbuf, "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
- dcode, dial, c->parm.setup.si1,
- c->parm.setup.si2, c->parm.setup.eazmsn);
+ snprintf(cbuf, sizeof(cbuf),
+ "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
+ dcode, p, c->parm.setup.si1,
+ c->parm.setup.si2, c->parm.setup.eazmsn);
i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card);
}
break;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Rapoport <[email protected]>
[ Upstream commit 5933a7bbb5de66482ea8aa874a7ebaf8e67603c4 ]
If the vxlan interface is created without explicit group definition,
there are corner cases which may cause kernel panic.
For instance, in the following scenario:
node A:
$ ip link add dev vxlan42 address 2c:c2:60:00:10:20 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.1/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02
$ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst <IPv4 address>
$ ping 10.0.0.2
node B:
$ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.2/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20
node B crashes:
vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000046
IP: [<ffffffff8143c459>] ip6_route_output+0x58/0x82
PGD 7bd89067 PUD 7bd4e067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000
RIP: 0010:[<ffffffff8143c459>] [<ffffffff8143c459>] ip6_route_output+0x58/0x82
RSP: 0018:ffff88007fd03668 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040
RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754
RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000
R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740
R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50
FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0
Stack:
0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740
ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360
ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360
Call Trace:
<IRQ>
[<ffffffff814320bb>] ip6_dst_lookup_tail+0x2d/0xa4
[<ffffffff814322a5>] ip6_dst_lookup+0x10/0x12
[<ffffffff81323b4e>] vxlan_xmit_one+0x32a/0x68c
[<ffffffff814a325a>] ? _raw_spin_unlock_irqrestore+0x12/0x14
[<ffffffff8104c551>] ? lock_timer_base.isra.23+0x26/0x4b
[<ffffffff8132451a>] vxlan_xmit+0x66a/0x6a8
[<ffffffff8141a365>] ? ipt_do_table+0x35f/0x37e
[<ffffffff81204ba2>] ? selinux_ip_postroute+0x41/0x26e
[<ffffffff8139d0c1>] dev_hard_start_xmit+0x2ce/0x3ce
[<ffffffff8139d491>] __dev_queue_xmit+0x2d0/0x392
[<ffffffff813b380f>] ? eth_header+0x28/0xb5
[<ffffffff8139d569>] dev_queue_xmit+0xb/0xd
[<ffffffff813a5aa6>] neigh_resolve_output+0x134/0x152
[<ffffffff813db741>] ip_finish_output2+0x236/0x299
[<ffffffff813dc074>] ip_finish_output+0x98/0x9d
[<ffffffff813dc749>] ip_output+0x62/0x67
[<ffffffff813da9f2>] dst_output+0xf/0x11
[<ffffffff813dc11c>] ip_local_out+0x1b/0x1f
[<ffffffff813dcf1b>] ip_send_skb+0x11/0x37
[<ffffffff813dcf70>] ip_push_pending_frames+0x2f/0x33
[<ffffffff813ff732>] icmp_push_reply+0x106/0x115
[<ffffffff813ff9e4>] icmp_reply+0x142/0x164
[<ffffffff813ffb3b>] icmp_echo.part.16+0x46/0x48
[<ffffffff813c1d30>] ? nf_iterate+0x43/0x80
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813ffb62>] icmp_echo+0x25/0x27
[<ffffffff814005f7>] icmp_rcv+0x1d2/0x20a
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813d810d>] ip_local_deliver_finish+0xd6/0x14f
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
[<ffffffff813d82bf>] ip_local_deliver+0x4a/0x4f
[<ffffffff813d7f7b>] ip_rcv_finish+0x253/0x26a
[<ffffffff813d7d28>] ? inet_add_protocol+0x3e/0x3e
[<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
[<ffffffff813d856a>] ip_rcv+0x2a6/0x2ec
[<ffffffff8139a9a0>] __netif_receive_skb_core+0x43e/0x478
[<ffffffff812a346f>] ? virtqueue_poll+0x16/0x27
[<ffffffff8139aa2f>] __netif_receive_skb+0x55/0x5a
[<ffffffff8139aaaa>] process_backlog+0x76/0x12f
[<ffffffff8139add8>] net_rx_action+0xa2/0x1ab
[<ffffffff81047847>] __do_softirq+0xca/0x1d1
[<ffffffff81047ace>] irq_exit+0x3e/0x85
[<ffffffff8100b98b>] do_IRQ+0xa9/0xc4
[<ffffffff814a37ad>] common_interrupt+0x6d/0x6d
<EOI>
[<ffffffff810378db>] ? native_safe_halt+0x6/0x8
[<ffffffff810110c7>] default_idle+0x9/0xd
[<ffffffff81011694>] arch_cpu_idle+0x13/0x1c
[<ffffffff8107480d>] cpu_startup_entry+0xbc/0x137
[<ffffffff8102e741>] start_secondary+0x1a0/0x1a5
Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89
RIP [<ffffffff8143c459>] ip6_route_output+0x58/0x82
RSP <ffff88007fd03668>
CR2: 0000000000000046
---[ end trace 4612329caab37efd ]---
When vxlan interface is created without explicit group definition, the
default_dst protocol family is initialiazed to AF_UNSPEC and the driver
assumes IPv4 configuration. On the other side, the default_dst protocol
family is used to differentiate between IPv4 and IPv6 cases and, since,
AF_UNSPEC != AF_INET, the processing takes the IPv6 path.
Making the IPv4 assumption explicit by settting default_dst protocol
family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in
snooped fdb entries fixes the corner case crashes.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -777,6 +777,9 @@ static int vxlan_fdb_add(struct ndmsg *n
if (err)
return err;
+ if (vxlan->default_dst.remote_ip.sa.sa_family != ip.sa.sa_family)
+ return -EAFNOSUPPORT;
+
spin_lock_bh(&vxlan->hash_lock);
err = vxlan_fdb_create(vxlan, addr, &ip, ndm->ndm_state, flags,
port, vni, ifindex, ndm->ndm_flags);
@@ -2486,9 +2489,10 @@ static int vxlan_newlink(struct net *net
vni = nla_get_u32(data[IFLA_VXLAN_ID]);
dst->remote_vni = vni;
+ /* Unless IPv6 is explicitly requested, assume IPv4 */
+ dst->remote_ip.sa.sa_family = AF_INET;
if (data[IFLA_VXLAN_GROUP]) {
dst->remote_ip.sin.sin_addr.s_addr = nla_get_be32(data[IFLA_VXLAN_GROUP]);
- dst->remote_ip.sa.sa_family = AF_INET;
} else if (data[IFLA_VXLAN_GROUP6]) {
if (!IS_ENABLED(CONFIG_IPV6))
return -EPFNOSUPPORT;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Pieczko <[email protected]>
[ Upstream commit 52ad762b85ed7947ec9eff6b036eb985352f6874 ]
When using the "separate_tx_channels=1" module parameter, the TX queues are
initially numbered starting from the first TX-only channel number (after all the
RX-only channels). efx_set_channels() renumbers the queues so that they are
indexed from zero.
On EF10, the TX queues need to be relabelled in this way before calling the
dimension_resources NIC type operation, otherwise the TX queue PIO buffers can be
linked to the wrong VIs when using "separate_tx_channels=1".
Added comments to explain UC/WC mappings for PIO buffers
Signed-off-by: Shradha Shah <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/sfc/ef10.c | 7 +++++++
drivers/net/ethernet/sfc/efx.c | 3 ++-
2 files changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -555,10 +555,17 @@ static int efx_ef10_dimension_resources(
* several of each (in fact that's the only option if host
* page size is >4K). So we may allocate some extra VIs just
* for writing PIO buffers through.
+ *
+ * The UC mapping contains (min_vis - 1) complete VIs and the
+ * first half of the next VI. Then the WC mapping begins with
+ * the second half of this last VI.
*/
uc_mem_map_size = PAGE_ALIGN((min_vis - 1) * EFX_VI_PAGE_SIZE +
ER_DZ_TX_PIOBUF);
if (nic_data->n_piobufs) {
+ /* pio_write_vi_base rounds down to give the number of complete
+ * VIs inside the UC mapping.
+ */
pio_write_vi_base = uc_mem_map_size / EFX_VI_PAGE_SIZE;
wc_mem_map_size = (PAGE_ALIGN((pio_write_vi_base +
nic_data->n_piobufs) *
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1514,6 +1514,8 @@ static int efx_probe_nic(struct efx_nic
if (rc)
goto fail1;
+ efx_set_channels(efx);
+
rc = efx->type->dimension_resources(efx);
if (rc)
goto fail2;
@@ -1524,7 +1526,6 @@ static int efx_probe_nic(struct efx_nic
efx->rx_indir_table[i] =
ethtool_rxfh_indir_default(i, efx->rss_spread);
- efx_set_channels(efx);
netif_set_real_num_tx_queues(efx->net_dev, efx->n_tx_channels);
netif_set_real_num_rx_queues(efx->net_dev, efx->n_rx_channels);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Yasevich <[email protected]>
[ Upstream commit 51dfe7b944998eaeb2b34d314f3a6b16a5fd621b ]
Including hardware acceleration features in vlan_features breaks
stacked vlans (Q-in-Q) by marking the bottom vlan interface as
capable of acceleration. This causes one of the tags to be lost
and the packets are sent with a sing vlan header.
CC: Nithin Nayak Sujir <[email protected]>
CC: Michael Chan <[email protected]>
Signed-off-by: Vlad Yasevich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/tg3.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -17485,8 +17485,6 @@ static int tg3_init_one(struct pci_dev *
tg3_init_bufmgr_config(tp);
- features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
-
/* 5700 B0 chips do not support checksumming correctly due
* to hardware bugs.
*/
@@ -17518,7 +17516,8 @@ static int tg3_init_one(struct pci_dev *
features |= NETIF_F_TSO_ECN;
}
- dev->features |= features;
+ dev->features |= features | NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
dev->vlan_features |= features;
/*
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira <[email protected]>
[ Upstream commit 8b7b932434f5eee495b91a2804f5b64ebb2bc835 ]
nla_strcmp compares the string length plus one, so it's implicitly
including the nul-termination in the comparison.
int nla_strcmp(const struct nlattr *nla, const char *str)
{
int len = strlen(str) + 1;
...
d = memcmp(nla_data(nla), str, len);
However, if NLA_STRING is used, userspace can send us a string without
the nul-termination. This is a problem since the string
comparison will not match as the last byte may be not the
nul-termination.
Fix this by skipping the comparison of the nul-termination if the
attribute data is nul-terminated. Suggested by Thomas Graf.
Cc: Florian Westphal <[email protected]>
Cc: Thomas Graf <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/nlattr.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -303,9 +303,15 @@ int nla_memcmp(const struct nlattr *nla,
*/
int nla_strcmp(const struct nlattr *nla, const char *str)
{
- int len = strlen(str) + 1;
- int d = nla_len(nla) - len;
+ int len = strlen(str);
+ char *buf = nla_data(nla);
+ int attrlen = nla_len(nla);
+ int d;
+ if (attrlen > 0 && buf[attrlen - 1] == '\0')
+ attrlen--;
+
+ d = attrlen - len;
if (d == 0)
d = memcmp(nla_data(nla), str, len);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit e2a1d3e47bb904082b758dec9d07edf241c45d05 ]
It seems I missed one change in get_timewait4_sock() to compute
the remaining time before deletion of IPV4 timewait socket.
This could result in wrong output in /proc/net/tcp for tm->when field.
Fixes: 96f817fedec4 ("tcp: shrink tcp6_timewait_sock by one cache line")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_ipv4.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2629,7 +2629,7 @@ static void get_timewait4_sock(const str
{
__be32 dest, src;
__u16 destp, srcp;
- long delta = tw->tw_ttd - jiffies;
+ s32 delta = tw->tw_ttd - inet_tw_time_stamp();
dest = tw->tw_daddr;
src = tw->tw_rcv_saddr;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Durrant <[email protected]>
[ Upstream commit 0576eddf24df716d8570ef8ca11452a9f98eaab2 ]
This patch removes a test in start_new_rx_buffer() that checks whether
a copy operation is less than MAX_BUFFER_OFFSET in length, since
MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of
start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less.
Signed-off-by: Paul Durrant <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Wei Liu <[email protected]>
Cc: Sander Eikelenboom <[email protected]>
Reported-By: Sander Eikelenboom <[email protected]>
Tested-By: Sander Eikelenboom <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/netback.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -203,8 +203,8 @@ static bool start_new_rx_buffer(int offs
* into multiple copies tend to give large frags their
* own buffers as before.
*/
- if ((offset + size > MAX_BUFFER_OFFSET) &&
- (size <= MAX_BUFFER_OFFSET) && offset && !head)
+ BUG_ON(size > MAX_BUFFER_OFFSET);
+ if ((offset + size > MAX_BUFFER_OFFSET) && offset && !head)
return true;
return false;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Frederic Sowa <[email protected]>
[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ]
After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify
processing to workqueue") some counters are now updated in process context
and thus need to disable bh before doing so, otherwise deadlocks can
happen on 32-bit archs. Fabio Estevam noticed this while while mounting
a NFS volume on an ARM board.
As a compensation for missing this I looked after the other *_STATS_BH
and found three other calls which need updating:
1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling)
2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ...
(only in case of icmp protocol with raw sockets in error handling)
3) ping6_v6_sendmsg (error handling)
Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue")
Reported-by: Fabio Estevam <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/icmp.c | 2 +-
net/ipv6/ip6_output.c | 4 ++--
net/ipv6/mcast.c | 11 ++++++-----
net/ipv6/ping.c | 4 ++--
4 files changed, 11 insertions(+), 10 deletions(-)
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -516,7 +516,7 @@ static void icmp6_send(struct sk_buff *s
np->tclass, NULL, &fl6, (struct rt6_info *)dst,
MSG_DONTWAIT, np->dontfrag);
if (err) {
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTERRORS);
+ ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
} else {
err = icmpv6_push_pending_frames(sk, &fl6, &tmp_hdr,
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1553,8 +1553,8 @@ int ip6_push_pending_frames(struct sock
if (proto == IPPROTO_ICMPV6) {
struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
- ICMP6MSGOUT_INC_STATS_BH(net, idev, icmp6_hdr(skb)->icmp6_type);
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
+ ICMP6MSGOUT_INC_STATS(net, idev, icmp6_hdr(skb)->icmp6_type);
+ ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
}
err = ip6_local_out(skb);
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1620,11 +1620,12 @@ static void mld_sendpack(struct sk_buff
dst_output);
out:
if (!err) {
- ICMP6MSGOUT_INC_STATS_BH(net, idev, ICMPV6_MLD2_REPORT);
- ICMP6_INC_STATS_BH(net, idev, ICMP6_MIB_OUTMSGS);
- IP6_UPD_PO_STATS_BH(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
- } else
- IP6_INC_STATS_BH(net, idev, IPSTATS_MIB_OUTDISCARDS);
+ ICMP6MSGOUT_INC_STATS(net, idev, ICMPV6_MLD2_REPORT);
+ ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
+ IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
+ } else {
+ IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
+ }
rcu_read_unlock();
return;
--- a/net/ipv6/ping.c
+++ b/net/ipv6/ping.c
@@ -182,8 +182,8 @@ int ping_v6_sendmsg(struct kiocb *iocb,
MSG_DONTWAIT, np->dontfrag);
if (err) {
- ICMP6_INC_STATS_BH(sock_net(sk), rt->rt6i_idev,
- ICMP6_MIB_OUTERRORS);
+ ICMP6_INC_STATS(sock_net(sk), rt->rt6i_idev,
+ ICMP6_MIB_OUTERRORS);
ip6_flush_pending_frames(sk);
} else {
err = icmpv6_push_pending_frames(sk, &fl6,
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit a39ee449f96a2cd44ce056d8a0a112211a9b1a1f ]
vhost fails to validate negative error code
from vhost_get_vq_desc causing
a crash: we are using -EFAULT which is 0xfffffff2
as vector size, which exceeds the allocated size.
The code in question was introduced in commit
8dd014adfea6f173c1ef6378f7e5e7924866c923
vhost-net: mergeable buffers support
CVE-2014-0055
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/net.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -501,9 +501,13 @@ static int get_rx_bufs(struct vhost_virt
r = -ENOBUFS;
goto err;
}
- d = vhost_get_vq_desc(vq->dev, vq, vq->iov + seg,
+ r = vhost_get_vq_desc(vq->dev, vq, vq->iov + seg,
ARRAY_SIZE(vq->iov) - seg, &out,
&in, log, log_num);
+ if (unlikely(r < 0))
+ goto err;
+
+ d = r;
if (d == vq->num) {
r = 0;
goto err;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit d8316f3991d207fe32881a9ac20241be8fa2bad0 ]
When mergeable buffers are disabled, and the
incoming packet is too large for the rx buffer,
get_rx_bufs returns success.
This was intentional in order for make recvmsg
truncate the packet and then handle_rx would
detect err != sock_len and drop it.
Unfortunately we pass the original sock_len to
recvmsg - which means we use parts of iov not fully
validated.
Fix this up by detecting this overrun and doing packet drop
immediately.
CVE-2014-0077
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/net.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -528,6 +528,12 @@ static int get_rx_bufs(struct vhost_virt
*iovcount = seg;
if (unlikely(log))
*log_num = nlogs;
+
+ /* Detect overrun */
+ if (unlikely(datalen > 0)) {
+ r = UIO_MAXIOV + 1;
+ goto err;
+ }
return headcount;
err:
vhost_discard_vq_desc(vq, headcount);
@@ -583,6 +589,14 @@ static void handle_rx(struct vhost_net *
/* On error, stop handling until the next kick. */
if (unlikely(headcount < 0))
break;
+ /* On overrun, truncate and discard */
+ if (unlikely(headcount > UIO_MAXIOV)) {
+ msg.msg_iovlen = 1;
+ err = sock->ops->recvmsg(NULL, sock, &msg,
+ 1, MSG_DONTWAIT | MSG_TRUNC);
+ pr_debug("Discarded rx packet: len %zd\n", sock_len);
+ continue;
+ }
/* OK, now we need to know about added descriptors. */
if (!headcount) {
if (unlikely(vhost_enable_notify(&net->dev, vq))) {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Neukum <[email protected]>
[ Upstream commit 14a0d635d18d0fb552dcc979d6d25106e6541f2e ]
This fixes a race which happens by freeing an object on the stack.
Quoting Julius:
> The issue is
> that it calls usbnet_terminate_urbs() before that, which temporarily
> installs a waitqueue in dev->wait in order to be able to wait on the
> tasklet to run and finish up some queues. The waiting itself looks
> okay, but the access to 'dev->wait' is totally unprotected and can
> race arbitrarily. I think in this case usbnet_bh() managed to succeed
> it's dev->wait check just before usbnet_terminate_urbs() sets it back
> to NULL. The latter then finishes and the waitqueue_t structure on its
> stack gets overwritten by other functions halfway through the
> wake_up() call in usbnet_bh().
The fix is to just not allocate the data structure on the stack.
As dev->wait is abused as a flag it also takes a runtime PM change
to fix this bug.
Signed-off-by: Oliver Neukum <[email protected]>
Reported-by: Grant Grundler <[email protected]>
Tested-by: Grant Grundler <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/usbnet.c | 33 +++++++++++++++++++--------------
include/linux/usb/usbnet.h | 2 +-
2 files changed, 20 insertions(+), 15 deletions(-)
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -753,14 +753,12 @@ EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs)
// precondition: never called in_interrupt
static void usbnet_terminate_urbs(struct usbnet *dev)
{
- DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
DECLARE_WAITQUEUE(wait, current);
int temp;
/* ensure there are no more active urbs */
- add_wait_queue(&unlink_wakeup, &wait);
+ add_wait_queue(&dev->wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
- dev->wait = &unlink_wakeup;
temp = unlink_urbs(dev, &dev->txq) +
unlink_urbs(dev, &dev->rxq);
@@ -774,15 +772,14 @@ static void usbnet_terminate_urbs(struct
"waited for %d urb completions\n", temp);
}
set_current_state(TASK_RUNNING);
- dev->wait = NULL;
- remove_wait_queue(&unlink_wakeup, &wait);
+ remove_wait_queue(&dev->wait, &wait);
}
int usbnet_stop (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
struct driver_info *info = dev->driver_info;
- int retval;
+ int retval, pm;
clear_bit(EVENT_DEV_OPEN, &dev->flags);
netif_stop_queue (net);
@@ -792,6 +789,8 @@ int usbnet_stop (struct net_device *net)
net->stats.rx_packets, net->stats.tx_packets,
net->stats.rx_errors, net->stats.tx_errors);
+ /* to not race resume */
+ pm = usb_autopm_get_interface(dev->intf);
/* allow minidriver to stop correctly (wireless devices to turn off
* radio etc) */
if (info->stop) {
@@ -818,6 +817,9 @@ int usbnet_stop (struct net_device *net)
dev->flags = 0;
del_timer_sync (&dev->delay);
tasklet_kill (&dev->bh);
+ if (!pm)
+ usb_autopm_put_interface(dev->intf);
+
if (info->manage_power &&
!test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags))
info->manage_power(dev, 0);
@@ -1438,11 +1440,12 @@ static void usbnet_bh (unsigned long par
/* restart RX again after disabling due to high error rate */
clear_bit(EVENT_RX_KILL, &dev->flags);
- // waiting for all pending urbs to complete?
- if (dev->wait) {
- if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
- wake_up (dev->wait);
- }
+ /* waiting for all pending urbs to complete?
+ * only then can we forgo submitting anew
+ */
+ if (waitqueue_active(&dev->wait)) {
+ if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
+ wake_up_all(&dev->wait);
// or are we maybe short a few urbs?
} else if (netif_running (dev->net) &&
@@ -1581,6 +1584,7 @@ usbnet_probe (struct usb_interface *udev
dev->driver_name = name;
dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
| NETIF_MSG_PROBE | NETIF_MSG_LINK);
+ init_waitqueue_head(&dev->wait);
skb_queue_head_init (&dev->rxq);
skb_queue_head_init (&dev->txq);
skb_queue_head_init (&dev->done);
@@ -1792,9 +1796,10 @@ int usbnet_resume (struct usb_interface
spin_unlock_irq(&dev->txq.lock);
if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
- /* handle remote wakeup ASAP */
- if (!dev->wait &&
- netif_device_present(dev->net) &&
+ /* handle remote wakeup ASAP
+ * we cannot race against stop
+ */
+ if (netif_device_present(dev->net) &&
!timer_pending(&dev->delay) &&
!test_bit(EVENT_RX_HALT, &dev->flags))
rx_alloc_submit(dev, GFP_NOIO);
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -30,7 +30,7 @@ struct usbnet {
struct driver_info *driver_info;
const char *driver_name;
void *driver_priv;
- wait_queue_head_t *wait;
+ wait_queue_head_t wait;
struct mutex phy_mutex;
unsigned char suspend_count;
unsigned char pkt_cnt, pkt_err;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Yasevich <[email protected]>
[ Upstream commit fc0d48b8fb449ca007b2057328abf736cb516168 ]
Currently, if the card supports CTAG acceleration we do not
account for the vlan header even if we are configuring an
8021AD vlan. This may not be best since we'll do software
tagging for 8021AD which will cause data copy on skb head expansion
Configure the length based on available hw offload capabilities and
vlan protocol.
CC: Patrick McHardy <[email protected]>
Signed-off-by: Vlad Yasevich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/8021q/vlan.c | 4 +++-
net/8021q/vlan_dev.c | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -307,9 +307,11 @@ static void vlan_sync_address(struct net
static void vlan_transfer_features(struct net_device *dev,
struct net_device *vlandev)
{
+ struct vlan_dev_priv *vlan = vlan_dev_priv(vlandev);
+
vlandev->gso_max_size = dev->gso_max_size;
- if (dev->features & NETIF_F_HW_VLAN_CTAG_TX)
+ if (vlan_hw_offload_capable(dev->features, vlan->vlan_proto))
vlandev->hard_header_len = dev->hard_header_len;
else
vlandev->hard_header_len = dev->hard_header_len + VLAN_HLEN;
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -592,7 +592,8 @@ static int vlan_dev_init(struct net_devi
#endif
dev->needed_headroom = real_dev->needed_headroom;
- if (real_dev->features & NETIF_F_HW_VLAN_CTAG_TX) {
+ if (vlan_hw_offload_capable(real_dev->features,
+ vlan_dev_priv(dev)->vlan_proto)) {
dev->header_ops = &vlan_passthru_header_ops;
dev->hard_header_len = real_dev->hard_header_len;
} else {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit 681daee2443291419c57cccb0671f5f94a839005 ]
Current error handling of virtqueue_kick() was wrong in two places:
- The skb were freed immediately when virtqueue_kick() fail during
xmit. This may lead double free since the skb was not detached from
the virtqueue.
- try_fill_recv() returns false when virtqueue_kick() fail. This will
lead unnecessary rescheduling of refill work.
Actually, it's safe to just ignore the kick failure in those two
places. So this patch fixes this by partially revert commit
67975901183799af8e93ec60e322f9e2a1940b9b.
Fixes 67975901183799af8e93ec60e322f9e2a1940b9b
(virtio_net: verify if virtqueue_kick() succeeded).
Cc: Heinz Graalfs <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/virtio_net.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -633,8 +633,7 @@ static bool try_fill_recv(struct receive
} while (rq->vq->num_free);
if (unlikely(rq->num > rq->max))
rq->max = rq->num;
- if (unlikely(!virtqueue_kick(rq->vq)))
- return false;
+ virtqueue_kick(rq->vq);
return !oom;
}
@@ -840,7 +839,7 @@ static netdev_tx_t start_xmit(struct sk_
err = xmit_skb(sq, skb);
/* This should not happen! */
- if (unlikely(err) || unlikely(!virtqueue_kick(sq->vq))) {
+ if (unlikely(err)) {
dev->stats.tx_fifo_errors++;
if (net_ratelimit())
dev_warn(&dev->dev,
@@ -849,6 +848,7 @@ static netdev_tx_t start_xmit(struct sk_
kfree_skb(skb);
return NETDEV_TX_OK;
}
+ virtqueue_kick(sq->vq);
/* Don't wait up for transmitted skbs to be freed. */
skb_orphan(skb);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Hugne <[email protected]>
[ Upstream commit a5d0e7c037119484a7006b883618bfa87996cb41 ]
If a topology event subscription fails for any reason, such as out
of memory, max number reached or because we received an invalid
request the correct behavior is to terminate the subscribers
connection to the topology server. This is currently broken and
produces the following oops:
[27.953662] tipc: Subscription rejected, illegal request
[27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6
[27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1
[27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5
[27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc]
[27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050
[27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a
[27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520
[27.964023] Call Trace:
[27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56
[27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91
[27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26
[27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140
[27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20
[27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc]
[27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc]
[27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc]
[27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc]
[27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc]
[27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc]
[27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0
[27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0
[27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0
[27.973622] [<ffffffff810648af>] kthread+0xdf/0x100
[27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
[27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0
[27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
The recursion occurs when subscr_terminate tries to grab the
subscriber lock, which is already taken by subscr_conn_msg_event.
We fix this by checking if the request to establish a new
subscription was successful, and if not we initiate termination of
the subscriber after we have released the subscriber lock.
Signed-off-by: Erik Hugne <[email protected]>
Reviewed-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/subscr.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -263,9 +263,9 @@ static void subscr_cancel(struct tipc_su
*
* Called with subscriber lock held.
*/
-static struct tipc_subscription *subscr_subscribe(struct tipc_subscr *s,
- struct tipc_subscriber *subscriber)
-{
+static int subscr_subscribe(struct tipc_subscr *s,
+ struct tipc_subscriber *subscriber,
+ struct tipc_subscription **sub_p) {
struct tipc_subscription *sub;
int swap;
@@ -276,23 +276,21 @@ static struct tipc_subscription *subscr_
if (s->filter & htohl(TIPC_SUB_CANCEL, swap)) {
s->filter &= ~htohl(TIPC_SUB_CANCEL, swap);
subscr_cancel(s, subscriber);
- return NULL;
+ return 0;
}
/* Refuse subscription if global limit exceeded */
if (atomic_read(&subscription_count) >= TIPC_MAX_SUBSCRIPTIONS) {
pr_warn("Subscription rejected, limit reached (%u)\n",
TIPC_MAX_SUBSCRIPTIONS);
- subscr_terminate(subscriber);
- return NULL;
+ return -EINVAL;
}
/* Allocate subscription object */
sub = kmalloc(sizeof(*sub), GFP_ATOMIC);
if (!sub) {
pr_warn("Subscription rejected, no memory\n");
- subscr_terminate(subscriber);
- return NULL;
+ return -ENOMEM;
}
/* Initialize subscription object */
@@ -306,8 +304,7 @@ static struct tipc_subscription *subscr_
(sub->seq.lower > sub->seq.upper)) {
pr_warn("Subscription rejected, illegal request\n");
kfree(sub);
- subscr_terminate(subscriber);
- return NULL;
+ return -EINVAL;
}
INIT_LIST_HEAD(&sub->nameseq_list);
list_add(&sub->subscription_list, &subscriber->subscription_list);
@@ -320,8 +317,8 @@ static struct tipc_subscription *subscr_
(Handler)subscr_timeout, (unsigned long)sub);
k_start_timer(&sub->timer, sub->timeout);
}
-
- return sub;
+ *sub_p = sub;
+ return 0;
}
/* Handle one termination request for the subscriber */
@@ -335,10 +332,14 @@ static void subscr_conn_msg_event(int co
void *usr_data, void *buf, size_t len)
{
struct tipc_subscriber *subscriber = usr_data;
- struct tipc_subscription *sub;
+ struct tipc_subscription *sub = NULL;
spin_lock_bh(&subscriber->lock);
- sub = subscr_subscribe((struct tipc_subscr *)buf, subscriber);
+ if (subscr_subscribe((struct tipc_subscr *)buf, subscriber, &sub) < 0) {
+ spin_unlock_bh(&subscriber->lock);
+ subscr_terminate(subscriber);
+ return;
+ }
if (sub)
tipc_nametbl_subscribe(sub);
spin_unlock_bh(&subscriber->lock);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Stevens <[email protected]>
[ Upstream commit 4b29dba9c085a4fb79058fb1c45a2f6257ca3dfa ]
The VXLAN neigh_reduce() code is completely non-functional since
check-in. Specific errors:
1) The original code drops all packets with a multicast destination address,
even though neighbor solicitations are sent to the solicited-node
address, a multicast address. The code after this check was never run.
2) The neighbor table lookup used the IPv6 header destination, which is the
solicited node address, rather than the target address from the
neighbor solicitation. So neighbor lookups would always fail if it
got this far. Also for L3MISSes.
3) The code calls ndisc_send_na(), which does a send on the tunnel device.
The context for neigh_reduce() is the transmit path, vxlan_xmit(),
where the host or a bridge-attached neighbor is trying to transmit
a neighbor solicitation. To respond to it, the tunnel endpoint needs
to do a *receive* of the appropriate neighbor advertisement. Doing a
send, would only try to send the advertisement, encapsulated, to the
remote destinations in the fdb -- hosts that definitely did not do the
corresponding solicitation.
4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the
isrouter flag in the advertisement. This has nothing to do with whether
or not the target is a router, and generally won't be set since the
tunnel endpoint is bridging, not routing, traffic.
The patch below creates a proxy neighbor advertisement to respond to
neighbor solicitions as intended, providing proper IPv6 support for neighbor
reduction.
Signed-off-by: David L Stevens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 127 ++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 113 insertions(+), 14 deletions(-)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1232,15 +1232,103 @@ out:
}
#if IS_ENABLED(CONFIG_IPV6)
+
+static struct sk_buff *vxlan_na_create(struct sk_buff *request,
+ struct neighbour *n, bool isrouter)
+{
+ struct net_device *dev = request->dev;
+ struct sk_buff *reply;
+ struct nd_msg *ns, *na;
+ struct ipv6hdr *pip6;
+ u8 *daddr;
+ int na_olen = 8; /* opt hdr + ETH_ALEN for target */
+ int ns_olen;
+ int i, len;
+
+ if (dev == NULL)
+ return NULL;
+
+ len = LL_RESERVED_SPACE(dev) + sizeof(struct ipv6hdr) +
+ sizeof(*na) + na_olen + dev->needed_tailroom;
+ reply = alloc_skb(len, GFP_ATOMIC);
+ if (reply == NULL)
+ return NULL;
+
+ reply->protocol = htons(ETH_P_IPV6);
+ reply->dev = dev;
+ skb_reserve(reply, LL_RESERVED_SPACE(request->dev));
+ skb_push(reply, sizeof(struct ethhdr));
+ skb_set_mac_header(reply, 0);
+
+ ns = (struct nd_msg *)skb_transport_header(request);
+
+ daddr = eth_hdr(request)->h_source;
+ ns_olen = request->len - skb_transport_offset(request) - sizeof(*ns);
+ for (i = 0; i < ns_olen-1; i += (ns->opt[i+1]<<3)) {
+ if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) {
+ daddr = ns->opt + i + sizeof(struct nd_opt_hdr);
+ break;
+ }
+ }
+
+ /* Ethernet header */
+ memcpy(eth_hdr(reply)->h_dest, daddr, ETH_ALEN);
+ memcpy(eth_hdr(reply)->h_source, n->ha, ETH_ALEN);
+ eth_hdr(reply)->h_proto = htons(ETH_P_IPV6);
+ reply->protocol = htons(ETH_P_IPV6);
+
+ skb_pull(reply, sizeof(struct ethhdr));
+ skb_set_network_header(reply, 0);
+ skb_put(reply, sizeof(struct ipv6hdr));
+
+ /* IPv6 header */
+
+ pip6 = ipv6_hdr(reply);
+ memset(pip6, 0, sizeof(struct ipv6hdr));
+ pip6->version = 6;
+ pip6->priority = ipv6_hdr(request)->priority;
+ pip6->nexthdr = IPPROTO_ICMPV6;
+ pip6->hop_limit = 255;
+ pip6->daddr = ipv6_hdr(request)->saddr;
+ pip6->saddr = *(struct in6_addr *)n->primary_key;
+
+ skb_pull(reply, sizeof(struct ipv6hdr));
+ skb_set_transport_header(reply, 0);
+
+ na = (struct nd_msg *)skb_put(reply, sizeof(*na) + na_olen);
+
+ /* Neighbor Advertisement */
+ memset(na, 0, sizeof(*na)+na_olen);
+ na->icmph.icmp6_type = NDISC_NEIGHBOUR_ADVERTISEMENT;
+ na->icmph.icmp6_router = isrouter;
+ na->icmph.icmp6_override = 1;
+ na->icmph.icmp6_solicited = 1;
+ na->target = ns->target;
+ memcpy(&na->opt[2], n->ha, ETH_ALEN);
+ na->opt[0] = ND_OPT_TARGET_LL_ADDR;
+ na->opt[1] = na_olen >> 3;
+
+ na->icmph.icmp6_cksum = csum_ipv6_magic(&pip6->saddr,
+ &pip6->daddr, sizeof(*na)+na_olen, IPPROTO_ICMPV6,
+ csum_partial(na, sizeof(*na)+na_olen, 0));
+
+ pip6->payload_len = htons(sizeof(*na)+na_olen);
+
+ skb_push(reply, sizeof(struct ipv6hdr));
+
+ reply->ip_summed = CHECKSUM_UNNECESSARY;
+
+ return reply;
+}
+
static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
{
struct vxlan_dev *vxlan = netdev_priv(dev);
- struct neighbour *n;
- union vxlan_addr ipa;
+ struct nd_msg *msg;
const struct ipv6hdr *iphdr;
const struct in6_addr *saddr, *daddr;
- struct nd_msg *msg;
- struct inet6_dev *in6_dev = NULL;
+ struct neighbour *n;
+ struct inet6_dev *in6_dev;
in6_dev = __in6_dev_get(dev);
if (!in6_dev)
@@ -1253,19 +1341,20 @@ static int neigh_reduce(struct net_devic
saddr = &iphdr->saddr;
daddr = &iphdr->daddr;
- if (ipv6_addr_loopback(daddr) ||
- ipv6_addr_is_multicast(daddr))
- goto out;
-
msg = (struct nd_msg *)skb_transport_header(skb);
if (msg->icmph.icmp6_code != 0 ||
msg->icmph.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION)
goto out;
- n = neigh_lookup(ipv6_stub->nd_tbl, daddr, dev);
+ if (ipv6_addr_loopback(daddr) ||
+ ipv6_addr_is_multicast(&msg->target))
+ goto out;
+
+ n = neigh_lookup(ipv6_stub->nd_tbl, &msg->target, dev);
if (n) {
struct vxlan_fdb *f;
+ struct sk_buff *reply;
if (!(n->nud_state & NUD_CONNECTED)) {
neigh_release(n);
@@ -1279,13 +1368,23 @@ static int neigh_reduce(struct net_devic
goto out;
}
- ipv6_stub->ndisc_send_na(dev, n, saddr, &msg->target,
- !!in6_dev->cnf.forwarding,
- true, false, false);
+ reply = vxlan_na_create(skb, n,
+ !!(f ? f->flags & NTF_ROUTER : 0));
+
neigh_release(n);
+
+ if (reply == NULL)
+ goto out;
+
+ if (netif_rx_ni(reply) == NET_RX_DROP)
+ dev->stats.rx_dropped++;
+
} else if (vxlan->flags & VXLAN_F_L3MISS) {
- ipa.sin6.sin6_addr = *daddr;
- ipa.sa.sa_family = AF_INET6;
+ union vxlan_addr ipa = {
+ .sin6.sin6_addr = msg->target,
+ .sa.sa_family = AF_INET6,
+ };
+
vxlan_ip_miss(dev, &ipa);
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pravin B Shelar <[email protected]>
[ Upstream commit fbd02dd405d0724a0f25897ed4a6813297c9b96f ]
Commit 10ddceb22ba (ip_tunnel:multicast process cause panic due
to skb->_skb_refdst NULL pointer) removed dst-drop call from
ip-tunnel-recv.
Following commit reintroduce dst-drop and fix the original bug by
checking loopback packet before releasing dst.
Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681
CC: Xin Long <[email protected]>
Signed-off-by: Pravin B Shelar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/gre_demux.c | 8 ++++++++
net/ipv4/ip_tunnel.c | 3 ---
net/ipv4/ip_tunnel_core.c | 1 +
3 files changed, 9 insertions(+), 3 deletions(-)
--- a/net/ipv4/gre_demux.c
+++ b/net/ipv4/gre_demux.c
@@ -182,6 +182,14 @@ static int gre_cisco_rcv(struct sk_buff
int i;
bool csum_err = false;
+#ifdef CONFIG_NET_IPGRE_BROADCAST
+ if (ipv4_is_multicast(ip_hdr(skb)->daddr)) {
+ /* Looped back packet, drop it! */
+ if (rt_is_output_route(skb_rtable(skb)))
+ goto drop;
+ }
+#endif
+
if (parse_gre_header(skb, &tpi, &csum_err) < 0)
goto drop;
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -411,9 +411,6 @@ int ip_tunnel_rcv(struct ip_tunnel *tunn
#ifdef CONFIG_NET_IPGRE_BROADCAST
if (ipv4_is_multicast(iph->daddr)) {
- /* Looped back packet, drop it! */
- if (rt_is_output_route(skb_rtable(skb)))
- goto drop;
tunnel->dev->stats.multicast++;
skb->pkt_type = PACKET_BROADCAST;
}
--- a/net/ipv4/ip_tunnel_core.c
+++ b/net/ipv4/ip_tunnel_core.c
@@ -109,6 +109,7 @@ int iptunnel_pull_header(struct sk_buff
secpath_reset(skb);
if (!skb->l4_rxhash)
skb->rxhash = 0;
+ skb_dst_drop(skb);
skb->vlan_tci = 0;
skb_set_queue_mapping(skb, 0);
skb->pkt_type = PACKET_HOST;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nishanth Menon <[email protected]>
[ Upstream commit ebf4ad955d3e26d4d2a33709624fc7b5b9d3b969 ]
Few platforms use external regulator to keep the ethernet MAC supplied.
So, request and enable the regulator for driver functionality.
Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage)
Reported-by: Russell King <[email protected]>
Suggested-by: Markus Pargmann <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/net/micrel-ks8851.txt | 1
drivers/net/ethernet/micrel/ks8851.c | 30 +++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ks8851.txt
@@ -7,3 +7,4 @@ Required properties:
Optional properties:
- local-mac-address : Ethernet mac address to use
+- vdd-supply: supply for Ethernet mac
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -23,6 +23,7 @@
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
@@ -83,6 +84,7 @@ union ks8851_tx_hdr {
* @rc_rxqcr: Cached copy of KS_RXQCR.
* @eeprom_size: Companion eeprom size in Bytes, 0 if no eeprom
* @eeprom: 93CX6 EEPROM state for accessing on-board EEPROM.
+ * @vdd_reg: Optional regulator supplying the chip
*
* The @lock ensures that the chip is protected when certain operations are
* in progress. When the read or write packet transfer is in progress, most
@@ -130,6 +132,7 @@ struct ks8851_net {
struct spi_transfer spi_xfer2[2];
struct eeprom_93cx6 eeprom;
+ struct regulator *vdd_reg;
};
static int msg_enable;
@@ -1414,6 +1417,21 @@ static int ks8851_probe(struct spi_devic
ks->spidev = spi;
ks->tx_space = 6144;
+ ks->vdd_reg = regulator_get_optional(&spi->dev, "vdd");
+ if (IS_ERR(ks->vdd_reg)) {
+ ret = PTR_ERR(ks->vdd_reg);
+ if (ret == -EPROBE_DEFER)
+ goto err_reg;
+ } else {
+ ret = regulator_enable(ks->vdd_reg);
+ if (ret) {
+ dev_err(&spi->dev, "regulator enable fail: %d\n",
+ ret);
+ goto err_reg_en;
+ }
+ }
+
+
mutex_init(&ks->lock);
spin_lock_init(&ks->statelock);
@@ -1508,8 +1526,14 @@ static int ks8851_probe(struct spi_devic
err_netdev:
free_irq(ndev->irq, ks);
-err_id:
err_irq:
+err_id:
+ if (!IS_ERR(ks->vdd_reg))
+ regulator_disable(ks->vdd_reg);
+err_reg_en:
+ if (!IS_ERR(ks->vdd_reg))
+ regulator_put(ks->vdd_reg);
+err_reg:
free_netdev(ndev);
return ret;
}
@@ -1523,6 +1547,10 @@ static int ks8851_remove(struct spi_devi
unregister_netdev(priv->netdev);
free_irq(spi->irq, priv);
+ if (!IS_ERR(priv->vdd_reg)) {
+ regulator_disable(priv->vdd_reg);
+ regulator_put(priv->vdd_reg);
+ }
free_netdev(priv->netdev);
return 0;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li RongQing <[email protected]>
[ Not applicable upstream commit, the code here has been removed
upstream. ]
Neighbor Solicitation is ipv6 protocol, so we should check
skb->protocol with ETH_P_IPV6
Signed-off-by: Li RongQing <[email protected]>
Cc: WANG Cong <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/netpoll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -742,7 +742,7 @@ static bool pkt_is_ns(struct sk_buff *sk
struct nd_msg *msg;
struct ipv6hdr *hdr;
- if (skb->protocol != htons(ETH_P_ARP))
+ if (skb->protocol != htons(ETH_P_IPV6))
return false;
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr) + sizeof(struct nd_msg)))
return false;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ Upstream commit f518338b16038beeb73e155e60d0f70beb9379f4 ]
Commit 812e44dd1829 ("ip6mr: advertise new mfc entries via rtnl") reuses the
function ip6mr_fill_mroute() to notify mfc events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.
Libraries like libnl will wait forever for NLMSG_DONE.
CC: Thomas Graf <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Thomas Graf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6mr.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -2349,13 +2349,14 @@ int ip6mr_get_route(struct net *net,
}
static int ip6mr_fill_mroute(struct mr6_table *mrt, struct sk_buff *skb,
- u32 portid, u32 seq, struct mfc6_cache *c, int cmd)
+ u32 portid, u32 seq, struct mfc6_cache *c, int cmd,
+ int flags)
{
struct nlmsghdr *nlh;
struct rtmsg *rtm;
int err;
- nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), flags);
if (nlh == NULL)
return -EMSGSIZE;
@@ -2423,7 +2424,7 @@ static void mr6_netlink_event(struct mr6
if (skb == NULL)
goto errout;
- err = ip6mr_fill_mroute(mrt, skb, 0, 0, mfc, cmd);
+ err = ip6mr_fill_mroute(mrt, skb, 0, 0, mfc, cmd, 0);
if (err < 0)
goto errout;
@@ -2462,7 +2463,8 @@ static int ip6mr_rtm_dumproute(struct sk
if (ip6mr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0)
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0)
goto done;
next_entry:
e++;
@@ -2476,7 +2478,8 @@ next_entry:
if (ip6mr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0) {
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0) {
spin_unlock_bh(&mfc_unres_lock);
goto done;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ Upstream commit 1c104a6bebf3c16b6248408b84f91d09ac8a26b6 ]
Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and
deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.
Libraries like libnl will wait forever for NLMSG_DONE.
CC: Thomas Graf <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Thomas Graf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/rtnetlink.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2014,12 +2014,13 @@ EXPORT_SYMBOL(rtmsg_ifinfo);
static int nlmsg_populate_fdb_fill(struct sk_buff *skb,
struct net_device *dev,
u8 *addr, u32 pid, u32 seq,
- int type, unsigned int flags)
+ int type, unsigned int flags,
+ int nlflags)
{
struct nlmsghdr *nlh;
struct ndmsg *ndm;
- nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), nlflags);
if (!nlh)
return -EMSGSIZE;
@@ -2057,7 +2058,7 @@ static void rtnl_fdb_notify(struct net_d
if (!skb)
goto errout;
- err = nlmsg_populate_fdb_fill(skb, dev, addr, 0, 0, type, NTF_SELF);
+ err = nlmsg_populate_fdb_fill(skb, dev, addr, 0, 0, type, NTF_SELF, 0);
if (err < 0) {
kfree_skb(skb);
goto errout;
@@ -2282,7 +2283,8 @@ static int nlmsg_populate_fdb(struct sk_
err = nlmsg_populate_fdb_fill(skb, dev, ha->addr,
portid, seq,
- RTM_NEWNEIGH, NTF_SELF);
+ RTM_NEWNEIGH, NTF_SELF,
+ NLM_F_MULTI);
if (err < 0)
return err;
skip:
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ Upstream commit 65886f439ab0fdc2dff20d1fa87afb98c6717472 ]
Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the
function ipmr_fill_mroute() to notify mfc events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.
Libraries like libnl will wait forever for NLMSG_DONE.
CC: Thomas Graf <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Thomas Graf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ipmr.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -2253,13 +2253,14 @@ int ipmr_get_route(struct net *net, stru
}
static int ipmr_fill_mroute(struct mr_table *mrt, struct sk_buff *skb,
- u32 portid, u32 seq, struct mfc_cache *c, int cmd)
+ u32 portid, u32 seq, struct mfc_cache *c, int cmd,
+ int flags)
{
struct nlmsghdr *nlh;
struct rtmsg *rtm;
int err;
- nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), NLM_F_MULTI);
+ nlh = nlmsg_put(skb, portid, seq, cmd, sizeof(*rtm), flags);
if (nlh == NULL)
return -EMSGSIZE;
@@ -2327,7 +2328,7 @@ static void mroute_netlink_event(struct
if (skb == NULL)
goto errout;
- err = ipmr_fill_mroute(mrt, skb, 0, 0, mfc, cmd);
+ err = ipmr_fill_mroute(mrt, skb, 0, 0, mfc, cmd, 0);
if (err < 0)
goto errout;
@@ -2366,7 +2367,8 @@ static int ipmr_rtm_dumproute(struct sk_
if (ipmr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0)
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0)
goto done;
next_entry:
e++;
@@ -2380,7 +2382,8 @@ next_entry:
if (ipmr_fill_mroute(mrt, skb,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
- mfc, RTM_NEWROUTE) < 0) {
+ mfc, RTM_NEWROUTE,
+ NLM_F_MULTI) < 0) {
spin_unlock_bh(&mfc_unres_lock);
goto done;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 632623153196bf183a69686ed9c07eee98ff1bf8 ]
While it is true that getnstimeofday() uses about 40 cycles if TSC
is available, it can use 1600 cycles if hpet is the clocksource.
Switch to get_jiffies_64(), as this is more than enough, and
go back to 60 seconds periods.
Fixes: 8c27bd75f04f ("tcp: syncookies: reduce cookie lifetime to 128 seconds")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Florian Westphal <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tcp.h | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -480,20 +480,21 @@ struct sock *cookie_v4_check(struct sock
#ifdef CONFIG_SYN_COOKIES
#include <linux/ktime.h>
-/* Syncookies use a monotonic timer which increments every 64 seconds.
+/* Syncookies use a monotonic timer which increments every 60 seconds.
* This counter is used both as a hash input and partially encoded into
* the cookie value. A cookie is only validated further if the delta
* between the current counter value and the encoded one is less than this,
- * i.e. a sent cookie is valid only at most for 128 seconds (or less if
+ * i.e. a sent cookie is valid only at most for 2*60 seconds (or less if
* the counter advances immediately after a cookie is generated).
*/
#define MAX_SYNCOOKIE_AGE 2
static inline u32 tcp_cookie_time(void)
{
- struct timespec now;
- getnstimeofday(&now);
- return now.tv_sec >> 6; /* 64 seconds granularity */
+ u64 val = get_jiffies_64();
+
+ do_div(val, 60 * HZ);
+ return val;
}
u32 __cookie_v4_init_sequence(const struct iphdr *iph, const struct tcphdr *th,
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Linus=20L=C3=BCssing?= <[email protected]>
[ Upstream commit 9ed973cc40c588abeaa58aea0683ea665132d11d ]
General IGMP and MLD queries are supposed to have the multicast
link-local all-nodes address as their destination according to RFC2236
section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810
section 5.1.15.
Without this check, such malformed IGMP/MLD queries can result in a
denial of service: The queries are ignored by most IGMP/MLD listeners
therefore they will not respond with an IGMP/MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.
Reported-by: Jan Stancek <[email protected]>
Signed-off-by: Linus Lüssing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1181,6 +1181,14 @@ static int br_ip4_multicast_query(struct
IGMPV3_MRC(ih3->code) * (HZ / IGMP_TIMER_SCALE) : 1;
}
+ /* RFC2236+RFC3376 (IGMPv2+IGMPv3) require the multicast link layer
+ * all-systems destination addresses (224.0.0.1) for general queries
+ */
+ if (!group && iph->daddr != htonl(INADDR_ALLHOSTS_GROUP)) {
+ err = -EINVAL;
+ goto out;
+ }
+
br_multicast_query_received(br, port, &br->ip4_querier, !!iph->saddr,
max_delay);
@@ -1228,6 +1236,7 @@ static int br_ip6_multicast_query(struct
unsigned long max_delay;
unsigned long now = jiffies;
const struct in6_addr *group = NULL;
+ bool is_general_query;
int err = 0;
spin_lock(&br->multicast_lock);
@@ -1262,6 +1271,16 @@ static int br_ip6_multicast_query(struct
max_delay = max(msecs_to_jiffies(mldv2_mrc(mld2q)), 1UL);
}
+ is_general_query = group && ipv6_addr_any(group);
+
+ /* RFC2710+RFC3810 (MLDv1+MLDv2) require the multicast link layer
+ * all-nodes destination address (ff02::1) for general queries
+ */
+ if (is_general_query && !ipv6_addr_is_ll_all_nodes(&ip6h->daddr)) {
+ err = -EINVAL;
+ goto out;
+ }
+
br_multicast_query_received(br, port, &br->ip6_querier,
!ipv6_addr_any(&ip6h->saddr), max_delay);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <[email protected]>
[ Upstream commit ff0992e9036e9810e7cd45234fa32ca1e79750e2 ]
This is a context modified revert of commit 6a9612e2cb22
("net: cdc_ncm: remove ncm_parm field") which introduced
a NCM specification violation, causing setup errors for
some devices. These errors resulted in the device and
host disagreeing about shared settings, with complete
failure to communicate as the end result.
The NCM specification require that many of the NCM specific
control reuests are sent only while the NCM Data Interface
is in alternate setting 0. Reverting the commit ensures that
we follow this requirement.
Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field")
Reported-and-tested-by: Pasi Kärkkäinen <[email protected]>
Reported-by: Thomas Schäfer <[email protected]>
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/cdc_ncm.c | 48 +++++++++++++++++++++-----------------------
include/linux/usb/cdc_ncm.h | 1
2 files changed, 24 insertions(+), 25 deletions(-)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -69,7 +69,6 @@ static struct usb_driver cdc_ncm_driver;
static int cdc_ncm_setup(struct usbnet *dev)
{
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
- struct usb_cdc_ncm_ntb_parameters ncm_parm;
u32 val;
u8 flags;
u8 iface_no;
@@ -83,22 +82,22 @@ static int cdc_ncm_setup(struct usbnet *
err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS,
USB_TYPE_CLASS | USB_DIR_IN
|USB_RECIP_INTERFACE,
- 0, iface_no, &ncm_parm,
- sizeof(ncm_parm));
+ 0, iface_no, &ctx->ncm_parm,
+ sizeof(ctx->ncm_parm));
if (err < 0) {
dev_err(&dev->intf->dev, "failed GET_NTB_PARAMETERS\n");
return err; /* GET_NTB_PARAMETERS is required */
}
/* read correct set of parameters according to device mode */
- ctx->rx_max = le32_to_cpu(ncm_parm.dwNtbInMaxSize);
- ctx->tx_max = le32_to_cpu(ncm_parm.dwNtbOutMaxSize);
- ctx->tx_remainder = le16_to_cpu(ncm_parm.wNdpOutPayloadRemainder);
- ctx->tx_modulus = le16_to_cpu(ncm_parm.wNdpOutDivisor);
- ctx->tx_ndp_modulus = le16_to_cpu(ncm_parm.wNdpOutAlignment);
+ ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize);
+ ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize);
+ ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
+ ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
+ ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
/* devices prior to NCM Errata shall set this field to zero */
- ctx->tx_max_datagrams = le16_to_cpu(ncm_parm.wNtbOutMaxDatagrams);
- ntb_fmt_supported = le16_to_cpu(ncm_parm.bmNtbFormatsSupported);
+ ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams);
+ ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported);
/* there are some minor differences in NCM and MBIM defaults */
if (cdc_ncm_comm_intf_is_mbim(ctx->control->cur_altsetting)) {
@@ -147,7 +146,7 @@ static int cdc_ncm_setup(struct usbnet *
}
/* inform device about NTB input size changes */
- if (ctx->rx_max != le32_to_cpu(ncm_parm.dwNtbInMaxSize)) {
+ if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE,
@@ -163,14 +162,6 @@ static int cdc_ncm_setup(struct usbnet *
dev_dbg(&dev->intf->dev, "Using default maximum transmit length=%d\n",
CDC_NCM_NTB_MAX_SIZE_TX);
ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;
-
- /* Adding a pad byte here simplifies the handling in
- * cdc_ncm_fill_tx_frame, by making tx_max always
- * represent the real skb max size.
- */
- if (ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
- ctx->tx_max++;
-
}
/*
@@ -440,6 +431,10 @@ advance:
goto error2;
}
+ /* initialize data interface */
+ if (cdc_ncm_setup(dev))
+ goto error2;
+
/* configure data interface */
temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
if (temp) {
@@ -454,12 +449,6 @@ advance:
goto error2;
}
- /* initialize data interface */
- if (cdc_ncm_setup(dev)) {
- dev_dbg(&intf->dev, "cdc_ncm_setup() failed\n");
- goto error2;
- }
-
usb_set_intfdata(ctx->data, dev);
usb_set_intfdata(ctx->control, dev);
@@ -476,6 +465,15 @@ advance:
dev->hard_mtu = ctx->tx_max;
dev->rx_urb_size = ctx->rx_max;
+ /* cdc_ncm_setup will override dwNtbOutMaxSize if it is
+ * outside the sane range. Adding a pad byte here if necessary
+ * simplifies the handling in cdc_ncm_fill_tx_frame, making
+ * tx_max always represent the real skb max size.
+ */
+ if (ctx->tx_max != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
+ ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
+ ctx->tx_max++;
+
return 0;
error2:
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -88,6 +88,7 @@
#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
struct cdc_ncm_ctx {
+ struct usb_cdc_ncm_ntb_parameters ncm_parm;
struct hrtimer tx_timer;
struct tasklet_struct bh;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: lucien <[email protected]>
[ Upstream commit e367c2d03dba4c9bcafad24688fadb79dd95b218 ]
In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as
transport),the ipsec header need to be added in the first fragment, so the mtu
will decrease to reserve space for it, then the second fragment come, the mtu
should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74
said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use
*mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway
equal with the first fragment's. and cannot turn back.
when I test through ping6 -c1 -s5000 $ip (mtu=1280):
...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232
...frag (1232|1216)
...frag (2448|1216)
...frag (3664|1216)
...frag (4880|164)
which should be:
...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232
...frag (1232|1232)
...frag (2464|1232)
...frag (3696|1232)
...frag (4928|116)
so delete the min() when change back the mtu.
Signed-off-by: Xin Long <[email protected]>
Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size")
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1088,21 +1088,19 @@ static void ip6_append_data_mtu(unsigned
unsigned int fragheaderlen,
struct sk_buff *skb,
struct rt6_info *rt,
- bool pmtuprobe)
+ unsigned int orig_mtu)
{
if (!(rt->dst.flags & DST_XFRM_TUNNEL)) {
if (skb == NULL) {
/* first fragment, reserve header_len */
- *mtu = *mtu - rt->dst.header_len;
+ *mtu = orig_mtu - rt->dst.header_len;
} else {
/*
* this fragment is not first, the headers
* space is regarded as data space.
*/
- *mtu = min(*mtu, pmtuprobe ?
- rt->dst.dev->mtu :
- dst_mtu(rt->dst.path));
+ *mtu = orig_mtu;
}
*maxfraglen = ((*mtu - fragheaderlen) & ~7)
+ fragheaderlen - sizeof(struct frag_hdr);
@@ -1119,7 +1117,7 @@ int ip6_append_data(struct sock *sk, int
struct ipv6_pinfo *np = inet6_sk(sk);
struct inet_cork *cork;
struct sk_buff *skb, *skb_prev = NULL;
- unsigned int maxfraglen, fragheaderlen, mtu;
+ unsigned int maxfraglen, fragheaderlen, mtu, orig_mtu;
int exthdrlen;
int dst_exthdrlen;
int hh_len;
@@ -1201,6 +1199,7 @@ int ip6_append_data(struct sock *sk, int
dst_exthdrlen = 0;
mtu = cork->fragsize;
}
+ orig_mtu = mtu;
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
@@ -1298,8 +1297,7 @@ alloc_new_skb:
if (skb == NULL || skb_prev == NULL)
ip6_append_data_mtu(&mtu, &maxfraglen,
fragheaderlen, skb, rt,
- np->pmtudisc ==
- IPV6_PMTUDISC_PROBE);
+ orig_mtu);
skb_prev = skb;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Stevens <[email protected]>
[ Upstream commit 7346135dcd3f9b57f30a5512094848c678d7143e ]
This patch fixes a NULL pointer dereference in the event of an
skb allocation failure in arp_reduce().
Signed-Off-By: David L Stevens <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1208,6 +1208,9 @@ static int arp_reduce(struct net_device
neigh_release(n);
+ if (reply == NULL)
+ goto out;
+
skb_reset_mac_header(reply);
__skb_pull(reply, skb_network_offset(reply));
reply->ip_summed = CHECKSUM_UNNECESSARY;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Wahren <[email protected]>
[ Upstream commit 84fe61821e4ebab6322eeae3f3c27f77f0031978 ]
If the Freescale fec is in promiscuous mode and network cable is
reconnected then the promiscuous mode get lost. The problem is caused
by a too soon call of set_multicast_list to re-enable promisc mode.
The FEC_R_CNTRL register changes are overwritten by fec_restart.
This patch fixes this by moving the call behind the init of FEC_R_CNTRL
register in fec_restart.
Successful tested on a i.MX28 board.
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/fec_main.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -528,13 +528,6 @@ fec_restart(struct net_device *ndev, int
/* Clear any outstanding interrupt. */
writel(0xffc00000, fep->hwp + FEC_IEVENT);
- /* Setup multicast filter. */
- set_multicast_list(ndev);
-#ifndef CONFIG_M5272
- writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
- writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
-#endif
-
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
@@ -655,6 +648,13 @@ fec_restart(struct net_device *ndev, int
writel(rcntl, fep->hwp + FEC_R_CNTRL);
+ /* Setup multicast filter. */
+ set_multicast_list(ndev);
+#ifndef CONFIG_M5272
+ writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
+ writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
+#endif
+
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
/* enable ENET endian swap */
ecntl |= (1 << 8);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: dingtianhong <[email protected]>
[ Upstream commit fb00bc2e6cd2046282ba4b03f4fe682aee70b2f8 ]
The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e
(bonding: use rlb_client_info->vlan_id instead of ->tag)
remove the rlb_client_info->tag, but occur some issues,
The vlan_get_tag() will return 0 for success and -EINVAL for
error, so the client_info->vlan_id always be set to 0 if the
vlan_get_tag return 0 for success, so the client_info would
never get a correct vlan id.
We should only set the vlan id to 0 when the vlan_get_tag return error.
Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag)
CC: Ding Tianhong <[email protected]>
CC: Jay Vosburgh <[email protected]>
CC: Andy Gospodarek <[email protected]>
Signed-off-by: Ding Tianhong <[email protected]>
Acked-by: Veaceslav Falico <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_alb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -731,7 +731,7 @@ static struct slave *rlb_choose_channel(
client_info->ntt = 0;
}
- if (!vlan_get_tag(skb, &client_info->vlan_id))
+ if (vlan_get_tag(skb, &client_info->vlan_id))
client_info->vlan_id = 0;
if (!client_info->assigned) {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Linus=20L=C3=BCssing?= <[email protected]>
[ Upstream commit 20a599bec95a52fa72432b2376a2ce47c5bb68fb ]
Without this check someone could easily create a denial of service
by injecting multicast-specific queries to enable the bridge
snooping part if no real querier issuing periodic general queries
is present on the link which would result in the bridge wrongly
shutting down ports for multicast traffic as the bridge did not learn
about these listeners.
With this patch the snooping code is enabled upon receiving valid,
general queries only.
Signed-off-by: Linus Lüssing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1127,9 +1127,10 @@ static void br_multicast_query_received(
struct net_bridge_port *port,
struct bridge_mcast_querier *querier,
int saddr,
+ bool is_general_query,
unsigned long max_delay)
{
- if (saddr)
+ if (saddr && is_general_query)
br_multicast_update_querier_timer(br, querier, max_delay);
else if (timer_pending(&querier->timer))
return;
@@ -1190,7 +1191,7 @@ static int br_ip4_multicast_query(struct
}
br_multicast_query_received(br, port, &br->ip4_querier, !!iph->saddr,
- max_delay);
+ !group, max_delay);
if (!group)
goto out;
@@ -1282,7 +1283,8 @@ static int br_ip6_multicast_query(struct
}
br_multicast_query_received(br, port, &br->ip6_querier,
- !ipv6_addr_any(&ip6h->saddr), max_delay);
+ !ipv6_addr_any(&ip6h->saddr),
+ is_general_query, max_delay);
if (!group)
goto out;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Leach <[email protected]>
[ Upstream commit dbb490b96584d4e958533fb637f08b557f505657 ]
When copying in a struct msghdr from the user, if the user has set the
msg_namelen parameter to a negative value it gets clamped to a valid
size due to a comparison between signed and unsigned values.
Ensure the syscall errors when the user passes in a negative value.
Signed-off-by: Matthew Leach <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/socket.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/socket.c
+++ b/net/socket.c
@@ -1972,6 +1972,10 @@ static int copy_msghdr_from_user(struct
{
if (copy_from_user(kmsg, umsg, sizeof(struct msghdr)))
return -EFAULT;
+
+ if (kmsg->msg_namelen < 0)
+ return -EINVAL;
+
if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
kmsg->msg_namelen = sizeof(struct sockaddr_storage);
return 0;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit c3f9b01849ef3bc69024990092b9f42e20df7797 ]
Lars Persson reported following deadlock :
-000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock
-001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0
-002 |ip_local_deliver_finish(skb = 0x8BD527A0)
-003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?)
-004 |netif_receive_skb(skb = 0x8BD527A0)
-005 |elk_poll(napi = 0x8C770500, budget = 64)
-006 |net_rx_action(?)
-007 |__do_softirq()
-008 |do_softirq()
-009 |local_bh_enable()
-010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?)
-011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0)
-012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0)
-013 |tcp_release_cb(sk = 0x8BE6B2A0)
-014 |release_sock(sk = 0x8BE6B2A0)
-015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?)
-016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096)
-017 |kernel_sendmsg(?, ?, ?, ?, size = 4096)
-018 |smb_send_kvec()
-019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0)
-020 |cifs_call_async()
-021 |cifs_async_writev(wdata = 0x87FD6580)
-022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88)
-023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88)
-024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88)
-025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88)
-026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88)
-027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0)
-028 |bdi_writeback_workfn(work = 0x87E4A9CC)
-029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC)
-030 |worker_thread(__worker = 0x8B045880)
-031 |kthread(_create = 0x87CADD90)
-032 |ret_from_kernel_thread(asm)
Bug occurs because __tcp_checksum_complete_user() enables BH, assuming
it is running from softirq context.
Lars trace involved a NIC without RX checksum support but other points
are problematic as well, like the prequeue stuff.
Problem is triggered by a timer, that found socket being owned by user.
tcp_release_cb() should call tcp_write_timer_handler() or
tcp_delack_timer_handler() in the appropriate context :
BH disabled and socket lock held, but 'owned' field cleared,
as if they were running from timer handlers.
Fixes: 6f458dfb4092 ("tcp: improve latencies of timer triggered events")
Reported-by: Lars Persson <[email protected]>
Tested-by: Lars Persson <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sock.h | 5 +++++
net/core/sock.c | 5 ++++-
net/ipv4/tcp_output.c | 11 +++++++++++
3 files changed, 20 insertions(+), 1 deletion(-)
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -1474,6 +1474,11 @@ static inline void sk_wmem_free_skb(stru
*/
#define sock_owned_by_user(sk) ((sk)->sk_lock.owned)
+static inline void sock_release_ownership(struct sock *sk)
+{
+ sk->sk_lock.owned = 0;
+}
+
/*
* Macro so as to not evaluate some arguments when
* lockdep is not enabled.
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2384,10 +2384,13 @@ void release_sock(struct sock *sk)
if (sk->sk_backlog.tail)
__release_sock(sk);
+ /* Warning : release_cb() might need to release sk ownership,
+ * ie call sock_release_ownership(sk) before us.
+ */
if (sk->sk_prot->release_cb)
sk->sk_prot->release_cb(sk);
- sk->sk_lock.owned = 0;
+ sock_release_ownership(sk);
if (waitqueue_active(&sk->sk_lock.wq))
wake_up(&sk->sk_lock.wq);
spin_unlock_bh(&sk->sk_lock.slock);
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -765,6 +765,17 @@ void tcp_release_cb(struct sock *sk)
if (flags & (1UL << TCP_TSQ_DEFERRED))
tcp_tsq_handler(sk);
+ /* Here begins the tricky part :
+ * We are called from release_sock() with :
+ * 1) BH disabled
+ * 2) sk_lock.slock spinlock held
+ * 3) socket owned by us (sk->sk_lock.owned == 1)
+ *
+ * But following code is meant to be called from BH handlers,
+ * so we should keep BH disabled, but early release socket ownership
+ */
+ sock_release_ownership(sk);
+
if (flags & (1UL << TCP_WRITE_TIMER_DEFERRED)) {
tcp_write_timer_handler(sk);
__sock_put(sk);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit 1fd819ecb90cc9b822cd84d3056ddba315d3340f ]
skb_segment copies frags around, so we need
to copy them carefully to avoid accessing
user memory after reporting completion to userspace
through a callback.
skb_segment doesn't normally happen on datapath:
TSO needs to be disabled - so disabling zero copy
in this case does not look like a big deal.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skbuff.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2772,6 +2772,7 @@ struct sk_buff *skb_segment(struct sk_bu
skb_frag_t *frag = skb_shinfo(head_skb)->frags;
unsigned int mss = skb_shinfo(head_skb)->gso_size;
unsigned int doffset = head_skb->data - skb_mac_header(head_skb);
+ struct sk_buff *frag_skb = head_skb;
unsigned int offset = doffset;
unsigned int tnl_hlen = skb_tnl_header_len(head_skb);
unsigned int headroom;
@@ -2816,6 +2817,7 @@ struct sk_buff *skb_segment(struct sk_bu
i = 0;
nfrags = skb_shinfo(list_skb)->nr_frags;
frag = skb_shinfo(list_skb)->frags;
+ frag_skb = list_skb;
pos += skb_headlen(list_skb);
while (pos < offset + len) {
@@ -2903,6 +2905,7 @@ struct sk_buff *skb_segment(struct sk_bu
i = 0;
nfrags = skb_shinfo(list_skb)->nr_frags;
frag = skb_shinfo(list_skb)->frags;
+ frag_skb = list_skb;
BUG_ON(!nfrags);
@@ -2917,6 +2920,9 @@ struct sk_buff *skb_segment(struct sk_bu
goto err;
}
+ if (unlikely(skb_orphan_frags(frag_skb, GFP_ATOMIC)))
+ goto err;
+
*nskb_frag = *frag;
__skb_frag_ref(nskb_frag);
size = skb_frag_size(nskb_frag);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit df5771ffefb13f8af5392bd54fd7e2b596a3a357 ]
rename local variable to make it easier to tell at a glance that we are
dealing with a head skb.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skbuff.c | 51 +++++++++++++++++++++++++--------------------------
1 file changed, 25 insertions(+), 26 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2756,41 +2756,42 @@ EXPORT_SYMBOL_GPL(skb_pull_rcsum);
/**
* skb_segment - Perform protocol segmentation on skb.
- * @skb: buffer to segment
+ * @head_skb: buffer to segment
* @features: features for the output path (see dev->features)
*
* This function performs segmentation on the given skb. It returns
* a pointer to the first in a list of new skbs for the segments.
* In case of error it returns ERR_PTR(err).
*/
-struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features)
+struct sk_buff *skb_segment(struct sk_buff *head_skb,
+ netdev_features_t features)
{
struct sk_buff *segs = NULL;
struct sk_buff *tail = NULL;
- struct sk_buff *fskb = skb_shinfo(skb)->frag_list;
- skb_frag_t *frag = skb_shinfo(skb)->frags;
- unsigned int mss = skb_shinfo(skb)->gso_size;
- unsigned int doffset = skb->data - skb_mac_header(skb);
+ struct sk_buff *fskb = skb_shinfo(head_skb)->frag_list;
+ skb_frag_t *frag = skb_shinfo(head_skb)->frags;
+ unsigned int mss = skb_shinfo(head_skb)->gso_size;
+ unsigned int doffset = head_skb->data - skb_mac_header(head_skb);
unsigned int offset = doffset;
- unsigned int tnl_hlen = skb_tnl_header_len(skb);
+ unsigned int tnl_hlen = skb_tnl_header_len(head_skb);
unsigned int headroom;
unsigned int len;
__be16 proto;
bool csum;
int sg = !!(features & NETIF_F_SG);
- int nfrags = skb_shinfo(skb)->nr_frags;
+ int nfrags = skb_shinfo(head_skb)->nr_frags;
int err = -ENOMEM;
int i = 0;
int pos;
- proto = skb_network_protocol(skb);
+ proto = skb_network_protocol(head_skb);
if (unlikely(!proto))
return ERR_PTR(-EINVAL);
csum = !!can_checksum_protocol(features, proto);
- __skb_push(skb, doffset);
- headroom = skb_headroom(skb);
- pos = skb_headlen(skb);
+ __skb_push(head_skb, doffset);
+ headroom = skb_headroom(head_skb);
+ pos = skb_headlen(head_skb);
do {
struct sk_buff *nskb;
@@ -2798,11 +2799,11 @@ struct sk_buff *skb_segment(struct sk_bu
int hsize;
int size;
- len = skb->len - offset;
+ len = head_skb->len - offset;
if (len > mss)
len = mss;
- hsize = skb_headlen(skb) - offset;
+ hsize = skb_headlen(head_skb) - offset;
if (hsize < 0)
hsize = 0;
if (hsize > len || !sg)
@@ -2851,7 +2852,7 @@ struct sk_buff *skb_segment(struct sk_bu
__skb_push(nskb, doffset);
} else {
nskb = __alloc_skb(hsize + doffset + headroom,
- GFP_ATOMIC, skb_alloc_rx_flag(skb),
+ GFP_ATOMIC, skb_alloc_rx_flag(head_skb),
NUMA_NO_NODE);
if (unlikely(!nskb))
@@ -2867,12 +2868,12 @@ struct sk_buff *skb_segment(struct sk_bu
segs = nskb;
tail = nskb;
- __copy_skb_header(nskb, skb);
- nskb->mac_len = skb->mac_len;
+ __copy_skb_header(nskb, head_skb);
+ nskb->mac_len = head_skb->mac_len;
skb_headers_offset_update(nskb, skb_headroom(nskb) - headroom);
- skb_copy_from_linear_data_offset(skb, -tnl_hlen,
+ skb_copy_from_linear_data_offset(head_skb, -tnl_hlen,
nskb->data - tnl_hlen,
doffset + tnl_hlen);
@@ -2881,7 +2882,7 @@ struct sk_buff *skb_segment(struct sk_bu
if (!sg) {
nskb->ip_summed = CHECKSUM_NONE;
- nskb->csum = skb_copy_and_csum_bits(skb, offset,
+ nskb->csum = skb_copy_and_csum_bits(head_skb, offset,
skb_put(nskb, len),
len, 0);
continue;
@@ -2889,10 +2890,11 @@ struct sk_buff *skb_segment(struct sk_bu
nskb_frag = skb_shinfo(nskb)->frags;
- skb_copy_from_linear_data_offset(skb, offset,
+ skb_copy_from_linear_data_offset(head_skb, offset,
skb_put(nskb, hsize), hsize);
- skb_shinfo(nskb)->tx_flags = skb_shinfo(skb)->tx_flags & SKBTX_SHARED_FRAG;
+ skb_shinfo(nskb)->tx_flags = skb_shinfo(head_skb)->tx_flags &
+ SKBTX_SHARED_FRAG;
while (pos < offset + len) {
if (i >= nfrags) {
@@ -2949,15 +2951,12 @@ perform_csum_check:
nskb->len - doffset, 0);
nskb->ip_summed = CHECKSUM_NONE;
}
- } while ((offset += len) < skb->len);
+ } while ((offset += len) < head_skb->len);
return segs;
err:
- while ((skb = segs)) {
- segs = skb->next;
- kfree_skb(skb);
- }
+ kfree_skb_list(segs);
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(skb_segment);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit 1a4cedaf65491e66e1e55b8428c89209da729209 ]
fskb is unrelated to frag: it's coming from
frag_list. Rename it list_skb to avoid confusion.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skbuff.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2768,7 +2768,7 @@ struct sk_buff *skb_segment(struct sk_bu
{
struct sk_buff *segs = NULL;
struct sk_buff *tail = NULL;
- struct sk_buff *fskb = skb_shinfo(head_skb)->frag_list;
+ struct sk_buff *list_skb = skb_shinfo(head_skb)->frag_list;
skb_frag_t *frag = skb_shinfo(head_skb)->frags;
unsigned int mss = skb_shinfo(head_skb)->gso_size;
unsigned int doffset = head_skb->data - skb_mac_header(head_skb);
@@ -2809,14 +2809,14 @@ struct sk_buff *skb_segment(struct sk_bu
if (hsize > len || !sg)
hsize = len;
- if (!hsize && i >= nfrags && skb_headlen(fskb) &&
- (skb_headlen(fskb) == len || sg)) {
- BUG_ON(skb_headlen(fskb) > len);
+ if (!hsize && i >= nfrags && skb_headlen(list_skb) &&
+ (skb_headlen(list_skb) == len || sg)) {
+ BUG_ON(skb_headlen(list_skb) > len);
i = 0;
- nfrags = skb_shinfo(fskb)->nr_frags;
- frag = skb_shinfo(fskb)->frags;
- pos += skb_headlen(fskb);
+ nfrags = skb_shinfo(list_skb)->nr_frags;
+ frag = skb_shinfo(list_skb)->frags;
+ pos += skb_headlen(list_skb);
while (pos < offset + len) {
BUG_ON(i >= nfrags);
@@ -2830,8 +2830,8 @@ struct sk_buff *skb_segment(struct sk_bu
frag++;
}
- nskb = skb_clone(fskb, GFP_ATOMIC);
- fskb = fskb->next;
+ nskb = skb_clone(list_skb, GFP_ATOMIC);
+ list_skb = list_skb->next;
if (unlikely(!nskb))
goto err;
@@ -2898,15 +2898,15 @@ struct sk_buff *skb_segment(struct sk_bu
while (pos < offset + len) {
if (i >= nfrags) {
- BUG_ON(skb_headlen(fskb));
+ BUG_ON(skb_headlen(list_skb));
i = 0;
- nfrags = skb_shinfo(fskb)->nr_frags;
- frag = skb_shinfo(fskb)->frags;
+ nfrags = skb_shinfo(list_skb)->nr_frags;
+ frag = skb_shinfo(list_skb)->frags;
BUG_ON(!nfrags);
- fskb = fskb->next;
+ list_skb = list_skb->next;
}
if (unlikely(skb_shinfo(nskb)->nr_frags >=
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit 4e1beba12d094c6c761ba5c49032b9b9e46380e8 ]
skb_frag can in fact point at either skb
or fskb so rename it generally "frag".
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skbuff.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2768,7 +2768,7 @@ struct sk_buff *skb_segment(struct sk_bu
struct sk_buff *segs = NULL;
struct sk_buff *tail = NULL;
struct sk_buff *fskb = skb_shinfo(skb)->frag_list;
- skb_frag_t *skb_frag = skb_shinfo(skb)->frags;
+ skb_frag_t *frag = skb_shinfo(skb)->frags;
unsigned int mss = skb_shinfo(skb)->gso_size;
unsigned int doffset = skb->data - skb_mac_header(skb);
unsigned int offset = doffset;
@@ -2814,19 +2814,19 @@ struct sk_buff *skb_segment(struct sk_bu
i = 0;
nfrags = skb_shinfo(fskb)->nr_frags;
- skb_frag = skb_shinfo(fskb)->frags;
+ frag = skb_shinfo(fskb)->frags;
pos += skb_headlen(fskb);
while (pos < offset + len) {
BUG_ON(i >= nfrags);
- size = skb_frag_size(skb_frag);
+ size = skb_frag_size(frag);
if (pos + size > offset + len)
break;
i++;
pos += size;
- skb_frag++;
+ frag++;
}
nskb = skb_clone(fskb, GFP_ATOMIC);
@@ -2900,7 +2900,7 @@ struct sk_buff *skb_segment(struct sk_bu
i = 0;
nfrags = skb_shinfo(fskb)->nr_frags;
- skb_frag = skb_shinfo(fskb)->frags;
+ frag = skb_shinfo(fskb)->frags;
BUG_ON(!nfrags);
@@ -2915,7 +2915,7 @@ struct sk_buff *skb_segment(struct sk_bu
goto err;
}
- *nskb_frag = *skb_frag;
+ *nskb_frag = *frag;
__skb_frag_ref(nskb_frag);
size = skb_frag_size(nskb_frag);
@@ -2928,7 +2928,7 @@ struct sk_buff *skb_segment(struct sk_bu
if (pos + size <= offset + len) {
i++;
- skb_frag++;
+ frag++;
pos += size;
} else {
skb_frag_size_sub(nskb_frag, pos + size - (offset + len));
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Chan <[email protected]>
[ Upstream commit a8d9bc2e9f5d1c5a25e33cec096d2a1652d3fd52 ]
The pci shutdown handler added in:
bnx2: Add pci shutdown handler
commit 25bfb1dd4ba3b2d9a49ce9d9b0cd7be1840e15ed
created a shutdown down sequence without chip reset if the device was
never brought up. This can cause the firmware to shutdown the PHY
prematurely and cause MMIO read cycles to be unresponsive. On some
systems, it may generate NMI in the bnx2's pci shutdown handler.
The fix is to tell the firmware not to shutdown the PHY if there was
no prior chip reset.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2.c | 37 +++++++++++++++++++++++++++++++----
drivers/net/ethernet/broadcom/bnx2.h | 5 ++++
2 files changed, 38 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -2490,6 +2490,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_da
bp->fw_wr_seq++;
msg_data |= bp->fw_wr_seq;
+ bp->fw_last_msg = msg_data;
bnx2_shmem_wr(bp, BNX2_DRV_MB, msg_data);
@@ -3982,8 +3983,23 @@ bnx2_setup_wol(struct bnx2 *bp)
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}
- if (!(bp->flags & BNX2_FLAG_NO_WOL))
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 1, 0);
+ if (!(bp->flags & BNX2_FLAG_NO_WOL)) {
+ u32 val;
+
+ wol_msg |= BNX2_DRV_MSG_DATA_WAIT3;
+ if (bp->fw_last_msg || BNX2_CHIP(bp) != BNX2_CHIP_5709) {
+ bnx2_fw_sync(bp, wol_msg, 1, 0);
+ return;
+ }
+ /* Tell firmware not to power down the PHY yet, otherwise
+ * the chip will take a long time to respond to MMIO reads.
+ */
+ val = bnx2_shmem_rd(bp, BNX2_PORT_FEATURE);
+ bnx2_shmem_wr(bp, BNX2_PORT_FEATURE,
+ val | BNX2_PORT_FEATURE_ASF_ENABLED);
+ bnx2_fw_sync(bp, wol_msg, 1, 0);
+ bnx2_shmem_wr(bp, BNX2_PORT_FEATURE, val);
+ }
}
@@ -4015,9 +4031,22 @@ bnx2_set_power_state(struct bnx2 *bp, pc
if (bp->wol)
pci_set_power_state(bp->pdev, PCI_D3hot);
- } else {
- pci_set_power_state(bp->pdev, PCI_D3hot);
+ break;
+
+ }
+ if (!bp->fw_last_msg && BNX2_CHIP(bp) == BNX2_CHIP_5709) {
+ u32 val;
+
+ /* Tell firmware not to power down the PHY yet,
+ * otherwise the other port may not respond to
+ * MMIO reads.
+ */
+ val = bnx2_shmem_rd(bp, BNX2_BC_STATE_CONDITION);
+ val &= ~BNX2_CONDITION_PM_STATE_MASK;
+ val |= BNX2_CONDITION_PM_STATE_UNPREP;
+ bnx2_shmem_wr(bp, BNX2_BC_STATE_CONDITION, val);
}
+ pci_set_power_state(bp->pdev, PCI_D3hot);
/* No more memory access after this point until
* device is brought back to D0.
--- a/drivers/net/ethernet/broadcom/bnx2.h
+++ b/drivers/net/ethernet/broadcom/bnx2.h
@@ -6890,6 +6890,7 @@ struct bnx2 {
u16 fw_wr_seq;
u16 fw_drv_pulse_wr_seq;
+ u32 fw_last_msg;
int rx_max_ring;
int rx_ring_size;
@@ -7396,6 +7397,10 @@ struct bnx2_rv2p_fw_file {
#define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000
#define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000
#define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000
+#define BNX2_CONDITION_PM_STATE_MASK 0x00030000
+#define BNX2_CONDITION_PM_STATE_FULL 0x00030000
+#define BNX2_CONDITION_PM_STATE_PREP 0x00020000
+#define BNX2_CONDITION_PM_STATE_UNPREP 0x00010000
#define BNX2_BC_STATE_DEBUG_CMD 0x1dc
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <[email protected]>
[ Upstream commit 8cb19905e9287a93ce7c2cbbdf742a060b00e219 ]
frag points at nskb, so name it appropriately
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skbuff.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2794,7 +2794,7 @@ struct sk_buff *skb_segment(struct sk_bu
do {
struct sk_buff *nskb;
- skb_frag_t *frag;
+ skb_frag_t *nskb_frag;
int hsize;
int size;
@@ -2887,7 +2887,7 @@ struct sk_buff *skb_segment(struct sk_bu
continue;
}
- frag = skb_shinfo(nskb)->frags;
+ nskb_frag = skb_shinfo(nskb)->frags;
skb_copy_from_linear_data_offset(skb, offset,
skb_put(nskb, hsize), hsize);
@@ -2915,13 +2915,13 @@ struct sk_buff *skb_segment(struct sk_bu
goto err;
}
- *frag = *skb_frag;
- __skb_frag_ref(frag);
- size = skb_frag_size(frag);
+ *nskb_frag = *skb_frag;
+ __skb_frag_ref(nskb_frag);
+ size = skb_frag_size(nskb_frag);
if (pos < offset) {
- frag->page_offset += offset - pos;
- skb_frag_size_sub(frag, offset - pos);
+ nskb_frag->page_offset += offset - pos;
+ skb_frag_size_sub(nskb_frag, offset - pos);
}
skb_shinfo(nskb)->nr_frags++;
@@ -2931,11 +2931,11 @@ struct sk_buff *skb_segment(struct sk_bu
skb_frag++;
pos += size;
} else {
- skb_frag_size_sub(frag, pos + size - (offset + len));
+ skb_frag_size_sub(nskb_frag, pos + size - (offset + len));
goto skip_fraglist;
}
- frag++;
+ nskb_frag++;
}
skip_fraglist:
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Annie Li <[email protected]>
[ Upstream commit 5bd076708664313f2bdbbc1cf71093313b7774a1 ]
Current netback uses gso_type to check whether the skb contains
gso offload, and this is wrong. Gso_size is the right one to
check gso existence, and gso_type is only used to check gso type.
Some skbs contains nonzero gso_type and zero gso_size, current
netback would treat these skbs as gso and create wrong response
for this. This also causes ssh failure to domu from other server.
V2: use skb_is_gso function as Paul Durrant suggested
Signed-off-by: Annie Li <[email protected]>
Acked-by: Wei Liu <[email protected]>
Reviewed-by: Paul Durrant <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netback/netback.c | 34 +++++++++++++++-------------------
1 file changed, 15 insertions(+), 19 deletions(-)
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -338,7 +338,7 @@ static void xenvif_gop_frag_copy(struct
struct gnttab_copy *copy_gop;
struct xenvif_rx_meta *meta;
unsigned long bytes;
- int gso_type;
+ int gso_type = XEN_NETIF_GSO_TYPE_NONE;
/* Data must not cross a page boundary. */
BUG_ON(size + offset > PAGE_SIZE<<compound_order(page));
@@ -397,12 +397,12 @@ static void xenvif_gop_frag_copy(struct
}
/* Leave a gap for the GSO descriptor. */
- if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
- gso_type = XEN_NETIF_GSO_TYPE_TCPV4;
- else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
- gso_type = XEN_NETIF_GSO_TYPE_TCPV6;
- else
- gso_type = XEN_NETIF_GSO_TYPE_NONE;
+ if (skb_is_gso(skb)) {
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
+ gso_type = XEN_NETIF_GSO_TYPE_TCPV4;
+ else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+ gso_type = XEN_NETIF_GSO_TYPE_TCPV6;
+ }
if (*head && ((1 << gso_type) & vif->gso_mask))
vif->rx.req_cons++;
@@ -436,19 +436,15 @@ static int xenvif_gop_skb(struct sk_buff
int head = 1;
int old_meta_prod;
int gso_type;
- int gso_size;
old_meta_prod = npo->meta_prod;
- if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
- gso_type = XEN_NETIF_GSO_TYPE_TCPV4;
- gso_size = skb_shinfo(skb)->gso_size;
- } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
- gso_type = XEN_NETIF_GSO_TYPE_TCPV6;
- gso_size = skb_shinfo(skb)->gso_size;
- } else {
- gso_type = XEN_NETIF_GSO_TYPE_NONE;
- gso_size = 0;
+ gso_type = XEN_NETIF_GSO_TYPE_NONE;
+ if (skb_is_gso(skb)) {
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
+ gso_type = XEN_NETIF_GSO_TYPE_TCPV4;
+ else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+ gso_type = XEN_NETIF_GSO_TYPE_TCPV6;
}
/* Set up a GSO prefix descriptor, if necessary */
@@ -456,7 +452,7 @@ static int xenvif_gop_skb(struct sk_buff
req = RING_GET_REQUEST(&vif->rx, vif->rx.req_cons++);
meta = npo->meta + npo->meta_prod++;
meta->gso_type = gso_type;
- meta->gso_size = gso_size;
+ meta->gso_size = skb_shinfo(skb)->gso_size;
meta->size = 0;
meta->id = req->id;
}
@@ -466,7 +462,7 @@ static int xenvif_gop_skb(struct sk_buff
if ((1 << gso_type) & vif->gso_mask) {
meta->gso_type = gso_type;
- meta->gso_size = gso_size;
+ meta->gso_size = skb_shinfo(skb)->gso_size;
} else {
meta->gso_type = XEN_NETIF_GSO_TYPE_NONE;
meta->gso_size = 0;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Peter=20Bostr=C3=B6m?= <[email protected]>
[ Upstream commit dd38743b4cc2f86be250eaf156cf113ba3dd531a ]
With TX VLAN offload enabled the source MAC address for frames sent using the
VLAN interface is currently set to the address of the real interface. This is
wrong since the VLAN interface may be configured with a different address.
The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47de
("vlan: Fix header ops passthru when doing TX VLAN offload.").
This patch sets the source address before calling the create function of the
real interface.
Signed-off-by: Peter Boström <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/8021q/vlan_dev.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -538,6 +538,9 @@ static int vlan_passthru_hard_header(str
struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
struct net_device *real_dev = vlan->real_dev;
+ if (saddr == NULL)
+ saddr = dev->dev_addr;
+
return dev_hard_header(skb, real_dev, type, daddr, saddr, len);
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 2d8d40afd187bced0a3d056366fb58d66fe845e3 ]
Resizing fq hash table allocates memory while holding qdisc spinlock,
with BH disabled.
This is definitely not good, as allocation might sleep.
We can drop the lock and get it when needed, we hold RTNL so no other
changes can happen at the same time.
Signed-off-by: Eric Dumazet <[email protected]>
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_fq.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
--- a/net/sched/sch_fq.c
+++ b/net/sched/sch_fq.c
@@ -578,9 +578,11 @@ static void fq_rehash(struct fq_sched_da
q->stat_gc_flows += fcnt;
}
-static int fq_resize(struct fq_sched_data *q, u32 log)
+static int fq_resize(struct Qdisc *sch, u32 log)
{
+ struct fq_sched_data *q = qdisc_priv(sch);
struct rb_root *array;
+ void *old_fq_root;
u32 idx;
if (q->fq_root && log == q->fq_trees_log)
@@ -593,13 +595,19 @@ static int fq_resize(struct fq_sched_dat
for (idx = 0; idx < (1U << log); idx++)
array[idx] = RB_ROOT;
- if (q->fq_root) {
- fq_rehash(q, q->fq_root, q->fq_trees_log, array, log);
- kfree(q->fq_root);
- }
+ sch_tree_lock(sch);
+
+ old_fq_root = q->fq_root;
+ if (old_fq_root)
+ fq_rehash(q, old_fq_root, q->fq_trees_log, array, log);
+
q->fq_root = array;
q->fq_trees_log = log;
+ sch_tree_unlock(sch);
+
+ kfree(old_fq_root);
+
return 0;
}
@@ -675,9 +683,11 @@ static int fq_change(struct Qdisc *sch,
q->flow_refill_delay = usecs_to_jiffies(usecs_delay);
}
- if (!err)
- err = fq_resize(q, fq_log);
-
+ if (!err) {
+ sch_tree_unlock(sch);
+ err = fq_resize(sch, fq_log);
+ sch_tree_lock(sch);
+ }
while (sch->q.qlen > sch->limit) {
struct sk_buff *skb = fq_dequeue(sch);
@@ -723,7 +733,7 @@ static int fq_init(struct Qdisc *sch, st
if (opt)
err = fq_change(sch, opt);
else
- err = fq_resize(q, q->fq_trees_log);
+ err = fq_resize(sch, q->fq_trees_log);
return err;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <[email protected]>
[ Upstream commit c88507fbad8055297c1d1e21e599f46960cbee39 ]
DST_NOCOUNT should only be used if an authorized user adds routes
locally. In case of routes which are added on behalf of router
advertisments this flag must not get used as it allows an unlimited
number of routes getting added remotely.
Signed-off-by: Sabrina Dubroca <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/route.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1495,7 +1495,7 @@ int ip6_route_add(struct fib6_config *cf
if (!table)
goto out;
- rt = ip6_dst_alloc(net, NULL, DST_NOCOUNT, table);
+ rt = ip6_dst_alloc(net, NULL, (cfg->fc_flags & RTF_ADDRCONF) ? 0 : DST_NOCOUNT, table);
if (!rt) {
err = -ENOMEM;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Nayshtut <[email protected]>
[ Upstream commit d2d273ffabd315eecefce21a4391d44b6e156b73 ]
Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS
offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds).
This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS
header.
The issue detected and the fix verified by running MS HCK Offload LSO test on
top of QEMU Windows guests, as this test sends IPv6 packets with
IPPROTO_DSTOPTS.
Signed-off-by: Anton Nayshtut <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/exthdrs_offload.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv6/exthdrs_offload.c
+++ b/net/ipv6/exthdrs_offload.c
@@ -25,11 +25,11 @@ int __init ipv6_exthdrs_offload_init(voi
int ret;
ret = inet6_add_offload(&rthdr_offload, IPPROTO_ROUTING);
- if (!ret)
+ if (ret)
goto out;
ret = inet6_add_offload(&dstopt_offload, IPPROTO_DSTOPTS);
- if (!ret)
+ if (ret)
goto out_rt;
out:
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
[ Upstream commit e588e2f286ed7da011ed357c24c5b9a554e26595 ]
Quoting Alexander Aring:
While fragmentation and unloading of 6lowpan module I got this kernel Oops
after few seconds:
BUG: unable to handle kernel paging request at f88bbc30
[..]
Modules linked in: ipv6 [last unloaded: 6lowpan]
Call Trace:
[<c012af4c>] ? call_timer_fn+0x54/0xb3
[<c012aef8>] ? process_timeout+0xa/0xa
[<c012b66b>] run_timer_softirq+0x140/0x15f
Problem is that incomplete frags are still around after unload; when
their frag expire timer fires, we get crash.
When a netns is removed (also done when unloading module), inet_frag
calls the evictor with 'force' argument to purge remaining frags.
The evictor loop terminates when accounted memory ('work') drops to 0
or the lru-list becomes empty. However, the mem accounting is done
via percpu counters and may not be accurate, i.e. loop may terminate
prematurely.
Alter evictor to only stop once the lru list is empty when force is
requested.
Reported-by: Phoebe Buckheister <[email protected]>
Reported-by: Alexander Aring <[email protected]>
Tested-by: Alexander Aring <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/inet_fragment.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -208,7 +208,7 @@ int inet_frag_evictor(struct netns_frags
}
work = frag_mem_limit(nf) - nf->low_thresh;
- while (work > 0) {
+ while (work > 0 || force) {
spin_lock(&nf->lru_lock);
if (list_empty(&nf->lru_list)) {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit de1443916791d75fdd26becb116898277bb0273f ]
Some applications didn't expect recvmsg() on a non blocking socket
could return -EINTR. This possibility was added as a side effect
of commit b3ca9b02b00704 ("net: fix multithreaded signal handling in
unix recv routines").
To hit this bug, you need to be a bit unlucky, as the u->readlock
mutex is usually held for very small periods.
Fixes: b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Rainer Weikusat <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/unix/af_unix.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1785,8 +1785,11 @@ static int unix_dgram_recvmsg(struct kio
goto out;
err = mutex_lock_interruptible(&u->readlock);
- if (err) {
- err = sock_intr_errno(sock_rcvtimeo(sk, noblock));
+ if (unlikely(err)) {
+ /* recvmsg() in non blocking mode is supposed to return -EAGAIN
+ * sk_rcvtimeo is not honored by mutex_lock_interruptible()
+ */
+ err = noblock ? -EAGAIN : -ERESTARTSYS;
goto out;
}
@@ -1911,6 +1914,7 @@ static int unix_stream_recvmsg(struct ki
struct unix_sock *u = unix_sk(sk);
struct sockaddr_un *sunaddr = msg->msg_name;
int copied = 0;
+ int noblock = flags & MSG_DONTWAIT;
int check_creds = 0;
int target;
int err = 0;
@@ -1926,7 +1930,7 @@ static int unix_stream_recvmsg(struct ki
goto out;
target = sock_rcvlowat(sk, flags&MSG_WAITALL, size);
- timeo = sock_rcvtimeo(sk, flags&MSG_DONTWAIT);
+ timeo = sock_rcvtimeo(sk, noblock);
/* Lock the socket to prevent queue disordering
* while sleeps in memcpy_tomsg
@@ -1938,8 +1942,11 @@ static int unix_stream_recvmsg(struct ki
}
err = mutex_lock_interruptible(&u->readlock);
- if (err) {
- err = sock_intr_errno(timeo);
+ if (unlikely(err)) {
+ /* recvmsg() in non blocking mode is supposed to return -EAGAIN
+ * sk_rcvtimeo is not honored by mutex_lock_interruptible()
+ */
+ err = noblock ? -EAGAIN : -ERESTARTSYS;
goto out;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Hugne <[email protected]>
[ Upstream commit edcc0511b5ee7235282a688cd604e3ae7f9e1fc9 ]
When a topology server subscriber is disconnected, the associated
connection id is set to zero. A check vs zero is then done in the
subscription timeout function to see if the subscriber have been
shut down. This is unnecessary, because all subscription timers
will be cancelled when a subscriber terminates. Setting the
connection id to zero is actually harmful because id zero is the
identity of the topology server listening socket, and can cause a
race that leads to this socket being closed instead.
Signed-off-by: Erik Hugne <[email protected]>
Acked-by: Ying Xue <[email protected]>
Reviewed-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/subscr.c | 11 -----------
1 file changed, 11 deletions(-)
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -149,14 +149,6 @@ static void subscr_timeout(struct tipc_s
/* The spin lock per subscriber is used to protect its members */
spin_lock_bh(&subscriber->lock);
- /* Validate if the connection related to the subscriber is
- * closed (in case subscriber is terminating)
- */
- if (subscriber->conid == 0) {
- spin_unlock_bh(&subscriber->lock);
- return;
- }
-
/* Validate timeout (in case subscription is being cancelled) */
if (sub->timeout == TIPC_WAIT_FOREVER) {
spin_unlock_bh(&subscriber->lock);
@@ -211,9 +203,6 @@ static void subscr_release(struct tipc_s
spin_lock_bh(&subscriber->lock);
- /* Invalidate subscriber reference */
- subscriber->conid = 0;
-
/* Destroy any existing subscriptions for subscriber */
list_for_each_entry_safe(sub, sub_temp, &subscriber->subscription_list,
subscription_list) {
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Hugne <[email protected]>
[ Upstream commit 1bb8dce57f4d15233688c68990852a10eb1cd79f ]
When the TIPC module is removed, the tasklet handler is disabled
before all other subsystems. This will cause lingering publications
in the name table because the node_down tasklets responsible to
clean up publications from an unreachable node will never run.
When the name table is shut down, these publications are detected
and an error message is logged:
tipc: nametbl_stop(): orphaned hash chain detected
This is actually a memory leak, introduced with commit
993b858e37b3120ee76d9957a901cca22312ffaa ("tipc: correct the order
of stopping services at rmmod")
Instead of just logging an error and leaking memory, we free
the orphaned entries during nametable shutdown.
Signed-off-by: Erik Hugne <[email protected]>
Reviewed-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/name_table.c | 37 ++++++++++++++++++++++++++++++++++---
1 file changed, 34 insertions(+), 3 deletions(-)
--- a/net/tipc/name_table.c
+++ b/net/tipc/name_table.c
@@ -942,20 +942,51 @@ int tipc_nametbl_init(void)
return 0;
}
+/**
+ * tipc_purge_publications - remove all publications for a given type
+ *
+ * tipc_nametbl_lock must be held when calling this function
+ */
+static void tipc_purge_publications(struct name_seq *seq)
+{
+ struct publication *publ, *safe;
+ struct sub_seq *sseq;
+ struct name_info *info;
+
+ if (!seq->sseqs) {
+ nameseq_delete_empty(seq);
+ return;
+ }
+ sseq = seq->sseqs;
+ info = sseq->info;
+ list_for_each_entry_safe(publ, safe, &info->zone_list, zone_list) {
+ tipc_nametbl_remove_publ(publ->type, publ->lower, publ->node,
+ publ->ref, publ->key);
+ }
+}
+
void tipc_nametbl_stop(void)
{
u32 i;
+ struct name_seq *seq;
+ struct hlist_head *seq_head;
+ struct hlist_node *safe;
if (!table.types)
return;
- /* Verify name table is empty, then release it */
+ /* Verify name table is empty and purge any lingering
+ * publications, then release the name table
+ */
write_lock_bh(&tipc_nametbl_lock);
for (i = 0; i < TIPC_NAMETBL_SIZE; i++) {
if (hlist_empty(&table.types[i]))
continue;
- pr_err("nametbl_stop(): orphaned hash chain detected\n");
- break;
+ seq_head = &table.types[i];
+ hlist_for_each_entry_safe(seq, safe, seq_head, ns_list) {
+ tipc_purge_publications(seq);
+ }
+ continue;
}
kfree(table.types);
table.types = NULL;
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Hugne <[email protected]>
[ Upstream commit 2892505ea170094f982516bb38105eac45f274b1 ]
Failure to schedule a TIPC tasklet with tipc_k_signal because the
tasklet handler is disabled is not an error. It means TIPC is
currently in the process of shutting down. We remove the error
logging in this case.
Signed-off-by: Erik Hugne <[email protected]>
Reviewed-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/handler.c | 1 -
1 file changed, 1 deletion(-)
--- a/net/tipc/handler.c
+++ b/net/tipc/handler.c
@@ -58,7 +58,6 @@ unsigned int tipc_k_signal(Handler routi
spin_lock_bh(&qitem_lock);
if (!handler_enabled) {
- pr_err("Signal request ignored by handler\n");
spin_unlock_bh(&qitem_lock);
return -ENOPROTOOPT;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ying Xue <[email protected]>
[ Upstream commit 6d4ebeb4df0176b1973875840a9f7e91394c0685 ]
Currently connection shutdown callback function is called when
connection instance is released in tipc_conn_kref_release(), and
receiving packets and sending packets are running in different
threads. Even if connection is closed by the thread of receiving
packets, its shutdown callback may not be called immediately as
the connection reference count is non-zero at that moment. So,
although the connection is shut down by the thread of receiving
packets, the thread of sending packets doesn't know it. Before
its shutdown callback is invoked to tell the sending thread its
connection has been closed, the sending thread may deliver
messages by tipc_conn_sendmsg(), this is why the following error
information appears:
"Sending subscription event failed, no memory"
To eliminate it, allow connection shutdown callback function to
be called before connection id is removed in tipc_close_conn(),
which makes the sending thread know the truth in time that its
socket is closed so that it doesn't send message to it. We also
remove the "Sending XXX failed..." error reporting for topology
and config services.
Signed-off-by: Ying Xue <[email protected]>
Signed-off-by: Erik Hugne <[email protected]>
Reviewed-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/config.c | 9 ++-------
net/tipc/server.c | 8 +++-----
net/tipc/subscr.c | 8 ++------
3 files changed, 7 insertions(+), 18 deletions(-)
--- a/net/tipc/config.c
+++ b/net/tipc/config.c
@@ -376,7 +376,6 @@ static void cfg_conn_msg_event(int conid
struct tipc_cfg_msg_hdr *req_hdr;
struct tipc_cfg_msg_hdr *rep_hdr;
struct sk_buff *rep_buf;
- int ret;
/* Validate configuration message header (ignore invalid message) */
req_hdr = (struct tipc_cfg_msg_hdr *)buf;
@@ -398,12 +397,8 @@ static void cfg_conn_msg_event(int conid
memcpy(rep_hdr, req_hdr, sizeof(*rep_hdr));
rep_hdr->tcm_len = htonl(rep_buf->len);
rep_hdr->tcm_flags &= htons(~TCM_F_REQUEST);
-
- ret = tipc_conn_sendmsg(&cfgsrv, conid, addr, rep_buf->data,
- rep_buf->len);
- if (ret < 0)
- pr_err("Sending cfg reply message failed, no memory\n");
-
+ tipc_conn_sendmsg(&cfgsrv, conid, addr, rep_buf->data,
+ rep_buf->len);
kfree_skb(rep_buf);
}
}
--- a/net/tipc/server.c
+++ b/net/tipc/server.c
@@ -87,7 +87,6 @@ static void tipc_clean_outqueues(struct
static void tipc_conn_kref_release(struct kref *kref)
{
struct tipc_conn *con = container_of(kref, struct tipc_conn, kref);
- struct tipc_server *s = con->server;
if (con->sock) {
tipc_sock_release_local(con->sock);
@@ -95,10 +94,6 @@ static void tipc_conn_kref_release(struc
}
tipc_clean_outqueues(con);
-
- if (con->conid)
- s->tipc_conn_shutdown(con->conid, con->usr_data);
-
kfree(con);
}
@@ -181,6 +176,9 @@ static void tipc_close_conn(struct tipc_
struct tipc_server *s = con->server;
if (test_and_clear_bit(CF_CONNECTED, &con->flags)) {
+ if (con->conid)
+ s->tipc_conn_shutdown(con->conid, con->usr_data);
+
spin_lock_bh(&s->idr_lock);
idr_remove(&s->conn_idr, con->conid);
s->idr_in_use--;
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -96,20 +96,16 @@ static void subscr_send_event(struct tip
{
struct tipc_subscriber *subscriber = sub->subscriber;
struct kvec msg_sect;
- int ret;
msg_sect.iov_base = (void *)&sub->evt;
msg_sect.iov_len = sizeof(struct tipc_event);
-
sub->evt.event = htohl(event, sub->swap);
sub->evt.found_lower = htohl(found_lower, sub->swap);
sub->evt.found_upper = htohl(found_upper, sub->swap);
sub->evt.port.ref = htohl(port_ref, sub->swap);
sub->evt.port.node = htohl(node, sub->swap);
- ret = tipc_conn_sendmsg(&topsrv, subscriber->conid, NULL,
- msg_sect.iov_base, msg_sect.iov_len);
- if (ret < 0)
- pr_err("Sending subscription event failed, no memory\n");
+ tipc_conn_sendmsg(&topsrv, subscriber->conid, NULL, msg_sect.iov_base,
+ msg_sect.iov_len);
}
/**
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ying Xue <[email protected]>
[ Upstream commit 4652edb70e8a7eebbe47fa931940f65522c36e8f ]
When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a
connection instance, its reference count value is increased if
it's found. But subsequently if it's found that the connection is
closed, the work of sending message is not queued into its server
send workqueue, and the connection reference count is not decreased.
This will cause a reference count leak. To reproduce this problem,
an application would need to open and closes topology server
connections with high intensity.
We fix this by immediately decrementing the connection reference
count if a send fails due to the connection being closed.
Signed-off-by: Ying Xue <[email protected]>
Acked-by: Erik Hugne <[email protected]>
Reviewed-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/server.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/tipc/server.c
+++ b/net/tipc/server.c
@@ -427,10 +427,12 @@ int tipc_conn_sendmsg(struct tipc_server
list_add_tail(&e->list, &con->outqueue);
spin_unlock_bh(&con->outqueue_lock);
- if (test_bit(CF_CONNECTED, &con->flags))
+ if (test_bit(CF_CONNECTED, &con->flags)) {
if (!queue_work(s->send_wq, &con->swork))
conn_put(con);
-
+ } else {
+ conn_put(con);
+ }
return 0;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
[ Upstream commit c485658bae87faccd7aed540fd2ca3ab37992310 ]
While working on ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to
verify if we/peer is AUTH capable"), we noticed that there's a skb
memory leakage in the error path.
Running the same reproducer as in ec0223ec48a9 and by unconditionally
jumping to the error label (to simulate an error condition) in
sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about
the unfreed chunk->auth_chunk skb clone:
Unreferenced object 0xffff8800b8f3a000 (size 256):
comm "softirq", pid 0, jiffies 4294769856 (age 110.757s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X.........
backtrace:
[<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0
[<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210
[<ffffffff81566929>] skb_clone+0x49/0xb0
[<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp]
[<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp]
[<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp]
[<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210
[<ffffffff815a64af>] nf_reinject+0xbf/0x180
[<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue]
[<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink]
[<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0
[<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink]
[<ffffffff815a2bd8>] netlink_unicast+0x168/0x250
[<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0
[<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0
[<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380
What happens is that commit bbd0d59809f9 clones the skb containing
the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case
that an endpoint requires COOKIE-ECHO chunks to be authenticated:
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
------------------ AUTH; COOKIE-ECHO ---------------->
<-------------------- COOKIE-ACK ---------------------
When we enter sctp_sf_do_5_1D_ce() and before we actually get to
the point where we process (and subsequently free) a non-NULL
chunk->auth_chunk, we could hit the "goto nomem_init" path from
an error condition and thus leave the cloned skb around w/o
freeing it.
The fix is to centrally free such clones in sctp_chunk_destroy()
handler that is invoked from sctp_chunk_free() after all refs have
dropped; and also move both kfree_skb(chunk->auth_chunk) there,
so that chunk->auth_chunk is either NULL (since sctp_chunkify()
allocs new chunks through kmem_cache_zalloc()) or non-NULL with
a valid skb pointer. chunk->skb and chunk->auth_chunk are the
only skbs in the sctp_chunk structure that need to be handeled.
While at it, we should use consume_skb() for both. It is the same
as dev_kfree_skb() but more appropriately named as we are not
a device but a protocol. Also, this effectively replaces the
kfree_skb() from both invocations into consume_skb(). Functions
are the same only that kfree_skb() assumes that the frame was
being dropped after a failure (e.g. for tools like drop monitor),
usage of consume_skb() seems more appropriate in function
sctp_chunk_destroy() though.
Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Vlad Yasevich <[email protected]>
Cc: Neil Horman <[email protected]>
Acked-by: Vlad Yasevich <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/sm_make_chunk.c | 4 ++--
net/sctp/sm_statefuns.c | 5 -----
2 files changed, 2 insertions(+), 7 deletions(-)
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1420,8 +1420,8 @@ static void sctp_chunk_destroy(struct sc
BUG_ON(!list_empty(&chunk->list));
list_del_init(&chunk->transmitted_list);
- /* Free the chunk skb data and the SCTP_chunk stub itself. */
- dev_kfree_skb(chunk->skb);
+ consume_skb(chunk->skb);
+ consume_skb(chunk->auth_chunk);
SCTP_DBG_OBJCNT_DEC(chunk);
kmem_cache_free(sctp_chunk_cachep, chunk);
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -761,7 +761,6 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(st
/* Make sure that we and the peer are AUTH capable */
if (!net->sctp.auth_enable || !new_asoc->peer.auth_capable) {
- kfree_skb(chunk->auth_chunk);
sctp_association_free(new_asoc);
return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
}
@@ -776,10 +775,6 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(st
auth.transport = chunk->transport;
ret = sctp_sf_authenticate(net, ep, new_asoc, type, &auth);
-
- /* We can now safely free the auth_chunk clone */
- kfree_skb(chunk->auth_chunk);
-
if (ret != SCTP_IERROR_NO_ERROR) {
sctp_association_free(new_asoc);
return sctp_sf_pdiscard(net, ep, asoc, type, arg, commands);
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit 24b9bf43e93e0edd89072da51cf1fab95fc69dec ]
I stumbled upon this very serious bug while hunting for another one,
it's a very subtle race condition between inet_frag_evictor,
inet_frag_intern and the IPv4/6 frag_queue and expire functions
(basically the users of inet_frag_kill/inet_frag_put).
What happens is that after a fragment has been added to the hash chain
but before it's been added to the lru_list (inet_frag_lru_add) in
inet_frag_intern, it may get deleted (either by an expired timer if
the system load is high or the timer sufficiently low, or by the
fraq_queue function for different reasons) before it's added to the
lru_list, then after it gets added it's a matter of time for the
evictor to get to a piece of memory which has been freed leading to a
number of different bugs depending on what's left there.
I've been able to trigger this on both IPv4 and IPv6 (which is normal
as the frag code is the same), but it's been much more difficult to
trigger on IPv4 due to the protocol differences about how fragments
are treated.
The setup I used to reproduce this is: 2 machines with 4 x 10G bonded
in a RR bond, so the same flow can be seen on multiple cards at the
same time. Then I used multiple instances of ping/ping6 to generate
fragmented packets and flood the machines with them while running
other processes to load the attacked machine.
*It is very important to have the _same flow_ coming in on multiple CPUs
concurrently. Usually the attacked machine would die in less than 30
minutes, if configured properly to have many evictor calls and timeouts
it could happen in 10 minutes or so.
An important point to make is that any caller (frag_queue or timer) of
inet_frag_kill will remove both the timer refcount and the
original/guarding refcount thus removing everything that's keeping the
frag from being freed at the next inet_frag_put. All of this could
happen before the frag was ever added to the LRU list, then it gets
added and the evictor uses a freed fragment.
An example for IPv6 would be if a fragment is being added and is at
the stage of being inserted in the hash after the hash lock is
released, but before inet_frag_lru_add executes (or is able to obtain
the lru lock) another overlapping fragment for the same flow arrives
at a different CPU which finds it in the hash, but since it's
overlapping it drops it invoking inet_frag_kill and thus removing all
guarding refcounts, and afterwards freeing it by invoking
inet_frag_put which removes the last refcount added previously by
inet_frag_find, then inet_frag_lru_add gets executed by
inet_frag_intern and we have a freed fragment in the lru_list.
The fix is simple, just move the lru_add under the hash chain locked
region so when a removing function is called it'll have to wait for
the fragment to be added to the lru_list, and then it'll remove it (it
works because the hash chain removal is done before the lru_list one
and there's no window between the two list adds when the frag can get
dropped). With this fix applied I couldn't kill the same machine in 24
hours with the same setup.
Fixes: 3ef0eb0db4bf ("net: frag, move LRU list maintenance outside of
rwlock")
CC: Florian Westphal <[email protected]>
CC: Jesper Dangaard Brouer <[email protected]>
CC: David S. Miller <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/inet_fragment.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -278,9 +278,10 @@ static struct inet_frag_queue *inet_frag
atomic_inc(&qp->refcnt);
hlist_add_head(&qp->list, &hb->chain);
+ inet_frag_lru_add(nf, qp);
spin_unlock(&hb->chain_lock);
read_unlock(&f->lock);
- inet_frag_lru_add(nf, qp);
+
return qp;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Moore <[email protected]>
commit f64410ec665479d7b4b77b7519e814253ed0f686 upstream.
This patch is based on an earlier patch by Eric Paris, he describes
the problem below:
"If an inode is accessed before policy load it will get placed on a
list of inodes to be initialized after policy load. After policy
load we call inode_doinit() which calls inode_doinit_with_dentry()
on all inodes accessed before policy load. In the case of inodes
in procfs that means we'll end up at the bottom where it does:
/* Default to the fs superblock SID. */
isec->sid = sbsec->sid;
if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
if (opt_dentry) {
isec->sclass = inode_mode_to_security_class(...)
rc = selinux_proc_get_sid(opt_dentry,
isec->sclass,
&sid);
if (rc)
goto out_unlock;
isec->sid = sid;
}
}
Since opt_dentry is null, we'll never call selinux_proc_get_sid()
and will leave the inode labeled with the label on the superblock.
I believe a fix would be to mimic the behavior of xattrs. Look
for an alias of the inode. If it can't be found, just leave the
inode uninitialized (and pick it up later) if it can be found, we
should be able to call selinux_proc_get_sid() ..."
On a system exhibiting this problem, you will notice a lot of files in
/proc with the generic "proc_t" type (at least the ones that were
accessed early in the boot), for example:
# ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
system_u:object_r:proc_t:s0 /proc/sys/kernel/shmmax
However, with this patch in place we see the expected result:
# ls -Z /proc/sys/kernel/shmmax | awk '{ print $4 " " $5 }'
system_u:object_r:sysctl_kernel_t:s0 /proc/sys/kernel/shmmax
Cc: Eric Paris <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Acked-by: Eric Paris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/hooks.c | 36 +++++++++++++++++++++++++++---------
1 file changed, 27 insertions(+), 9 deletions(-)
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1419,15 +1419,33 @@ static int inode_doinit_with_dentry(stru
isec->sid = sbsec->sid;
if ((sbsec->flags & SE_SBPROC) && !S_ISLNK(inode->i_mode)) {
- if (opt_dentry) {
- isec->sclass = inode_mode_to_security_class(inode->i_mode);
- rc = selinux_proc_get_sid(opt_dentry,
- isec->sclass,
- &sid);
- if (rc)
- goto out_unlock;
- isec->sid = sid;
- }
+ /* We must have a dentry to determine the label on
+ * procfs inodes */
+ if (opt_dentry)
+ /* Called from d_instantiate or
+ * d_splice_alias. */
+ dentry = dget(opt_dentry);
+ else
+ /* Called from selinux_complete_init, try to
+ * find a dentry. */
+ dentry = d_find_alias(inode);
+ /*
+ * This can be hit on boot when a file is accessed
+ * before the policy is loaded. When we load policy we
+ * may find inodes that have no dentry on the
+ * sbsec->isec_head list. No reason to complain as
+ * these will get fixed up the next time we go through
+ * inode_doinit() with a dentry, before these inodes
+ * could be used again by userspace.
+ */
+ if (!dentry)
+ goto out_unlock;
+ isec->sclass = inode_mode_to_security_class(inode->i_mode);
+ rc = selinux_proc_get_sid(dentry, isec->sclass, &sid);
+ dput(dentry);
+ if (rc)
+ goto out_unlock;
+ isec->sid = sid;
}
break;
}
3.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: =?UTF-8?q?Linus=20L=C3=BCssing?= <[email protected]>
[ Upstream commit 6565b9eeef194afbb3beec80d6dd2447f4091f8c ]
MLD queries are supposed to have an IPv6 link-local source address
according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch
adds a sanity check to ignore such broken MLD queries.
Without this check, such malformed MLD queries can result in a
denial of service: The queries are ignored by any MLD listener
therefore they will not respond with an MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.
Reported-by: Jan Stancek <[email protected]>
Signed-off-by: Linus Lüssing <[email protected]>
Reviewed-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1235,6 +1235,12 @@ static int br_ip6_multicast_query(struct
(port && port->state == BR_STATE_DISABLED))
goto out;
+ /* RFC2710+RFC3810 (MLDv1+MLDv2) require link-local source addresses */
+ if (!(ipv6_addr_type(&ip6h->saddr) & IPV6_ADDR_LINKLOCAL)) {
+ err = -EINVAL;
+ goto out;
+ }
+
if (skb->len == sizeof(*mld)) {
if (!pskb_may_pull(skb, sizeof(*mld))) {
err = -EINVAL;
On 04/11/2014 09:10 AM, Greg Kroah-Hartman wrote:
> ------------------------
> NOTE
>
> This is probably going to be the last 3.13.y kernel release. There
> _might_ be one more after this, but given my travel schedule for the
> next few weeks, don't count on it. Please move to the 3.14 kernel tree
> as soon as possible.
>
> ------------------------
>
> This is the start of the stable review cycle for the 3.13.10 release.
> There are 65 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Apr 13 16:09:42 UTC 2014.
> Anything received after that time might be too late.
>
Build results:
total: 126 pass: 122 skipped: 4 fail: 0
Qemu tests all passed. Results are as expected.
Details are available at http://server.roeck-us.net:8010/builders.
Guenter
On 04/11/2014 10:10 AM, Greg Kroah-Hartman wrote:
> ------------------------
> NOTE
>
> This is probably going to be the last 3.13.y kernel release. There
> _might_ be one more after this, but given my travel schedule for the
> next few weeks, don't count on it. Please move to the 3.14 kernel tree
> as soon as possible.
>
> ------------------------
>
> This is the start of the stable review cycle for the 3.13.10 release.
> There are 65 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Apr 13 16:09:42 UTC 2014.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.13.10-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test systems. No dmesg regressions.
-- Shuah
--
Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
[email protected] | (970) 672-0658