On 24/03/2014 09:27, Boris BREZILLON :
> Add slow clk, and slow oscillators documentation.
>
> Signed-off-by: Boris BREZILLON <[email protected]>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 72 ++++++++++++++++++++
> 1 file changed, 72 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
> index 9a7025b..820061c 100644
> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> @@ -6,6 +6,16 @@ This binding uses the common clock binding[1].
>
> Required properties:
> - compatible : shall be one of the following:
> + "atmel,at91sam9x5-sckc":
> + at91 SCKC (Slow Clock Controller)
> + This node contains the slow clock definitions.
> +
> + "atmel,at91sam9x5-clk-slow-osc":
> + at91 slow oscillator
> +
> + "atmel,at91sam9x5-clk-slow-rc-osc":
> + at91 internal slow RC oscillator
> +
> "atmel,at91rm9200-pmc" or
> "atmel,at91sam9g45-pmc" or
> "atmel,at91sam9n12-pmc" or
> @@ -15,6 +25,11 @@ Required properties:
> All at91 specific clocks (clocks defined below) must be child
> node of the PMC node.
>
> + "atmel,at91sam9x5-clk-slow" (under sckc node)
> + or
> + "atmel,at91sam9260-clk-slow" (under pmc node):
> + at91 slow clk
> +
> "atmel,at91rm9200-clk-main-osc"
> "atmel,at91sam9x5-clk-main-rc-osc"
> at91 main clk sources
> @@ -59,6 +74,63 @@ Required properties:
> "atmel,at91sam9x5-clk-utmi":
> at91 utmi clock
>
> +Required properties for SCKC node:
> +- reg : defines the IO memory reserved for the SCKC.
> +- #size-cells : shall be 0 (reg is used to encode clk id).
> +- #address-cells : shall be 1 (reg is used to encode clk id).
> +
> +
> +For example:
> + ckc: sckc@fffffe50 {
s/ckc/sckc/ ?
> + compatible = "atmel,sama5d3-pmc";
> + reg = <0xfffffe50 0x4>
> + #size-cells = <0>;
> + #address-cells = <1>;
> +
> + /* put at91 slow clocks here */
> + };
> +
> +
> +Required properties for internal slow RC oscillator:
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clock-frequency : define the internal RC oscillator frequency.
> +
> +Optional properties:
> +- clock-accuracy : define the internal RC oscillator accuracy.
> +
> +For example:
> + slow_rc_osc: slow_rc_osc {
> + compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
> + clock-frequency = <32768>;
> + clock-accuracy = <50000000>;
> + };
> +
> +Required properties for slow oscillator:
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall encode the main osc source clk sources (see atmel datasheet).
> +
> +Optional properties:
> +- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
> + provided on XIN.
> +
> +For example:
> + slow_osc: slow_osc {
> + compatible = "atmel,at91rm9200-clk-slow-osc";
> + #clock-cells = <0>;
> + clocks = <&slow_xtal>;
> + };
> +
> +Required properties for slow clock:
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall encode the slow clk sources (see atmel datasheet).
> +
> +For example:
> + clk32k: slck {
> + compatible = "atmel,at91sam9x5-clk-slow";
> + #clock-cells = <0>;
> + clocks = <&slow_rc_osc &slow_osc>;
> + };
> +
> Required properties for PMC node:
> - reg : defines the IO memory reserved for the PMC.
> - #size-cells : shall be 0 (reg is used to encode clk id).
>
--
Nicolas Ferre