Hi Mathias, hit a small issue playing with -next:
On Thu, May 8, 2014 at 9:26 AM, Mathias Nyman
<[email protected]> wrote:
> To create a global command queue we require that each command put on the
> command ring is submitted with a command structure.
>
> Functions that queue commands and wait for completion need to allocate a command
> before submitting it, and free it once completed. The following command queuing
> functions need to be modified.
>
> xhci_configure_endpoint()
> xhci_address_device()
> xhci_queue_slot_control()
> xhci_queue_stop_endpoint()
> xhci_queue_new_dequeue_state()
> xhci_queue_reset_ep()
> xhci_configure_endpoint()
>
> xhci_configure_endpoint() could already be called with a command structure,
> and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These
> are changed and a command structure is now required. This change also simplifies
> the configure endpoint command completion handling and the "goto bandwidth_change"
> handling code can be removed.
>
> In some cases the command queuing function is called in interrupt context.
> These commands needs to be allocated atomically, and they can't wait for
> completion. These commands will in this patch be freed directly after queuing,
> but freeing will be moved to the command completion event handler in a later
> patch once we get the global command queue up.(Just so that we won't leak
> memory in the middle of the patch set)
>
> Signed-off-by: Mathias Nyman <[email protected]>
> ---
> drivers/usb/host/xhci-hub.c | 21 +++--
> drivers/usb/host/xhci-ring.c | 107 +++++++++++++-----------
> drivers/usb/host/xhci.c | 194 ++++++++++++++++++++++++++++---------------
> drivers/usb/host/xhci.h | 31 +++----
> 4 files changed, 216 insertions(+), 137 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index 1ad6bc1..3ce9c0a 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -20,7 +20,8 @@
> * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> */
>
> -#include <linux/gfp.h>
> +
> +#include <linux/slab.h>
> #include <asm/unaligned.h>
>
> #include "xhci.h"
> @@ -284,12 +285,22 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
>
> spin_lock_irqsave(&xhci->lock, flags);
> for (i = LAST_EP_INDEX; i > 0; i--) {
> - if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
> - xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
> + if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
> + struct xhci_command *command;
> + command = xhci_alloc_command(xhci, false, false,
> + GFP_NOIO);
...this needs to be GFP_NOWAIT, or move it outside the lock.
On 06/06/2014 01:16 AM, Dan Williams wrote:
> Hi Mathias, hit a small issue playing with -next:
>
> On Thu, May 8, 2014 at 9:26 AM, Mathias Nyman
> <[email protected]> wrote:
>> To create a global command queue we require that each command put on the
>> command ring is submitted with a command structure.
>>
>> Functions that queue commands and wait for completion need to allocate a command
>> before submitting it, and free it once completed. The following command queuing
>> functions need to be modified.
>>
>> xhci_configure_endpoint()
>> xhci_address_device()
>> xhci_queue_slot_control()
>> xhci_queue_stop_endpoint()
>> xhci_queue_new_dequeue_state()
>> xhci_queue_reset_ep()
>> xhci_configure_endpoint()
>>
>> xhci_configure_endpoint() could already be called with a command structure,
>> and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These
>> are changed and a command structure is now required. This change also simplifies
>> the configure endpoint command completion handling and the "goto bandwidth_change"
>> handling code can be removed.
>>
>> In some cases the command queuing function is called in interrupt context.
>> These commands needs to be allocated atomically, and they can't wait for
>> completion. These commands will in this patch be freed directly after queuing,
>> but freeing will be moved to the command completion event handler in a later
>> patch once we get the global command queue up.(Just so that we won't leak
>> memory in the middle of the patch set)
>>
>> Signed-off-by: Mathias Nyman <[email protected]>
>> ---
>> drivers/usb/host/xhci-hub.c | 21 +++--
>> drivers/usb/host/xhci-ring.c | 107 +++++++++++++-----------
>> drivers/usb/host/xhci.c | 194 ++++++++++++++++++++++++++++---------------
>> drivers/usb/host/xhci.h | 31 +++----
>> 4 files changed, 216 insertions(+), 137 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
>> index 1ad6bc1..3ce9c0a 100644
>> --- a/drivers/usb/host/xhci-hub.c
>> +++ b/drivers/usb/host/xhci-hub.c
>> @@ -20,7 +20,8 @@
>> * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
>> */
>>
>> -#include <linux/gfp.h>
>> +
>> +#include <linux/slab.h>
>> #include <asm/unaligned.h>
>>
>> #include "xhci.h"
>> @@ -284,12 +285,22 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
>>
>> spin_lock_irqsave(&xhci->lock, flags);
>> for (i = LAST_EP_INDEX; i > 0; i--) {
>> - if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
>> - xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
>> + if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) {
>> + struct xhci_command *command;
>> + command = xhci_alloc_command(xhci, false, false,
>> + GFP_NOIO);
>
> ...this needs to be GFP_NOWAIT, or move it outside the lock.
>
That's right, thanks, I'll fix it.
-Mathias