At a T440s under hardened Gentoo Linux I' faced with this new spew (system seems to be working fine otherwise):
pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x25
ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x25
ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
------------[ cut here ]------------
Could not request EC data io port 0x62
WARNING: CPU: 0 PID: 1 at drivers/acpi/ec.c:1677 acpi_ec_add+0x26e/0x280
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G T 5.6.5 #5
Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
RIP: 0010:acpi_ec_add+0x26e/0x280
Code: fe ff ff 48 8b 75 10 48 c7 c7 d0 27 9b 8d e8 81 c7 b6 ff 0f 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 9b 8d e8 6a c7 b6 ff <0f> 0b e9 8a fe ff ff 41 bc f4 ff ff ff e9 ac fe ff ff 48 83 3d f8
RSP: 0000:ffffb45b40053c80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa2827012b800 RCX: 0000000000000000
RDX: 0000000000000026 RSI: ffffffff8e26f666 RDI: ffffffff8e26fa66
RBP: ffffa282709b4b00 R08: 0000000089294f76 R09: 0000000000000026
R10: 000000000000000f R11: ffffb45b40053aa8 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
FS: 0000000000000000(0000) GS:ffffa28272600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa2827e5ff000 CR3: 000000008e80a001 CR4: 00000000001606f0
Call Trace:
acpi_device_probe+0x40/0x100
really_probe+0xe8/0x2d0
driver_probe_device+0x57/0xd0
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x90/0xe0
__device_attach+0xea/0x160
acpi_bus_register_early_device+0x4b/0x70
acpi_ec_init+0x2ee/0x361
acpi_init+0x410/0x4a0
? acpi_sleep_proc_init+0x4c/0x4c
do_one_initcall+0x93/0x1f0
kernel_init_freeable+0x3e7/0x4cc
? rest_init+0xc0/0xc0
kernel_init+0x6/0x110
? rest_init+0xc0/0xc0
ret_from_fork+0x35/0x40
---[ end trace cd90af9f64ca9345 ]---
------------[ cut here ]------------
Could not request EC cmd io port 0x66
WARNING: CPU: 0 PID: 1 at drivers/acpi/ec.c:1679 acpi_ec_add+0x257/0x280
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W T 5.6.5 #5
Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
RIP: 0010:acpi_ec_add+0x257/0x280
Code: 8b 55 00 48 89 ef 48 89 10 e8 65 e0 ff ff 48 8b 2d 4e d7 3b 01 e9 4a fe ff ff 48 8b 75 10 48 c7 c7 d0 27 9b 8d e8 81 c7 b6 ff <0f> 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 9b 8d e8 6a c7 b6
RAX: 0000000000000000 RBX: ffffa2827012b800 RCX: 0000000000000000
RDX: 0000000000000025 RSI: ffffffff8e26f665 RDI: ffffffff8e26fa65
RBP: ffffa282709b4b00 R08: 000000008935c8e8 R09: 0000000000000025
R10: 000000000000000f R11: ffffb45b40053aa8 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
FS: 0000000000000000(0000) GS:ffffa28272600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa2827e5ff000 CR3: 000000008e80a001 CR4: 00000000001606f0
Call Trace:
acpi_device_probe+0x40/0x100
really_probe+0xe8/0x2d0
driver_probe_device+0x57/0xd0
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x90/0xe0
__device_attach+0xea/0x160
acpi_bus_register_early_device+0x4b/0x70
acpi_ec_init+0x2ee/0x361
acpi_init+0x410/0x4a0
? acpi_sleep_proc_init+0x4c/0x4c
do_one_initcall+0x93/0x1f0
kernel_init_freeable+0x3e7/0x4cc
? rest_init+0xc0/0xc0
kernel_init+0x6/0x110
? rest_init+0xc0/0xc0
ret_from_fork+0x35/0x40
---[ end trace cd90af9f64ca9346 ]---
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xaf70b000-0xafffffff]
e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
system 00:01: [io 0x1800-0x189f] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
--
Toralf
[add Cc's]
On 4/17/20 8:10 AM, Toralf Förster wrote:
> At a T440s under hardened Gentoo Linux I' faced with this new spew (system seems to be working fine otherwise):
>
>
> pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
> pci 0000:02:00.0: supports D1 D2
> pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
> pci 0000:00:1c.0: PCI bridge to [bus 02]
> pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
> pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
> pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
> pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.1: PCI bridge to [bus 03]
> pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
> ACPI: EC: interrupt unblocked
> ACPI: EC: event unblocked
> ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> ACPI: EC: GPE=0x25
> ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
> ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
> ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> ACPI: EC: GPE=0x25
> ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
> ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
> ------------[ cut here ]------------
> Could not request EC data io port 0x62
> WARNING: CPU: 0 PID: 1 at drivers/acpi/ec.c:1677 acpi_ec_add+0x26e/0x280
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Tainted: G T 5.6.5 #5
> Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
> RIP: 0010:acpi_ec_add+0x26e/0x280
> Code: fe ff ff 48 8b 75 10 48 c7 c7 d0 27 9b 8d e8 81 c7 b6 ff 0f 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 9b 8d e8 6a c7 b6 ff <0f> 0b e9 8a fe ff ff 41 bc f4 ff ff ff e9 ac fe ff ff 48 83 3d f8
> RSP: 0000:ffffb45b40053c80 EFLAGS: 00010282
> RAX: 0000000000000000 RBX: ffffa2827012b800 RCX: 0000000000000000
> RDX: 0000000000000026 RSI: ffffffff8e26f666 RDI: ffffffff8e26fa66
> RBP: ffffa282709b4b00 R08: 0000000089294f76 R09: 0000000000000026
> R10: 000000000000000f R11: ffffb45b40053aa8 R12: 0000000000000000
> R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
> FS: 0000000000000000(0000) GS:ffffa28272600000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffa2827e5ff000 CR3: 000000008e80a001 CR4: 00000000001606f0
> Call Trace:
> acpi_device_probe+0x40/0x100
> really_probe+0xe8/0x2d0
> driver_probe_device+0x57/0xd0
> ? driver_allows_async_probing+0x50/0x50
> bus_for_each_drv+0x90/0xe0
> __device_attach+0xea/0x160
> acpi_bus_register_early_device+0x4b/0x70
> acpi_ec_init+0x2ee/0x361
> acpi_init+0x410/0x4a0
> ? acpi_sleep_proc_init+0x4c/0x4c
> do_one_initcall+0x93/0x1f0
> kernel_init_freeable+0x3e7/0x4cc
> ? rest_init+0xc0/0xc0
> kernel_init+0x6/0x110
> ? rest_init+0xc0/0xc0
> ret_from_fork+0x35/0x40
> ---[ end trace cd90af9f64ca9345 ]---
> ------------[ cut here ]------------
> Could not request EC cmd io port 0x66
> WARNING: CPU: 0 PID: 1 at drivers/acpi/ec.c:1679 acpi_ec_add+0x257/0x280
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W T 5.6.5 #5
> Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
> RIP: 0010:acpi_ec_add+0x257/0x280
> Code: 8b 55 00 48 89 ef 48 89 10 e8 65 e0 ff ff 48 8b 2d 4e d7 3b 01 e9 4a fe ff ff 48 8b 75 10 48 c7 c7 d0 27 9b 8d e8 81 c7 b6 ff <0f> 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 9b 8d e8 6a c7 b6
> RAX: 0000000000000000 RBX: ffffa2827012b800 RCX: 0000000000000000
> RDX: 0000000000000025 RSI: ffffffff8e26f665 RDI: ffffffff8e26fa65
> RBP: ffffa282709b4b00 R08: 000000008935c8e8 R09: 0000000000000025
> R10: 000000000000000f R11: ffffb45b40053aa8 R12: 0000000000000000
> R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
> FS: 0000000000000000(0000) GS:ffffa28272600000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffa2827e5ff000 CR3: 000000008e80a001 CR4: 00000000001606f0
> Call Trace:
> acpi_device_probe+0x40/0x100
> really_probe+0xe8/0x2d0
> driver_probe_device+0x57/0xd0
> ? driver_allows_async_probing+0x50/0x50
> bus_for_each_drv+0x90/0xe0
> __device_attach+0xea/0x160
> acpi_bus_register_early_device+0x4b/0x70
> acpi_ec_init+0x2ee/0x361
> acpi_init+0x410/0x4a0
> ? acpi_sleep_proc_init+0x4c/0x4c
> do_one_initcall+0x93/0x1f0
> kernel_init_freeable+0x3e7/0x4cc
> ? rest_init+0xc0/0xc0
> kernel_init+0x6/0x110
> ? rest_init+0xc0/0xc0
> ret_from_fork+0x35/0x40
> ---[ end trace cd90af9f64ca9346 ]---
> iommu: Default domain type: Translated
> pci 0000:00:02.0: vgaarb: setting as boot VGA device
> pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> pci 0000:00:02.0: vgaarb: bridge control possible
> vgaarb: loaded
> SCSI subsystem initialized
> libata version 3.00 loaded.
> ACPI: bus type USB registered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> pps_core: LinuxPPS API ver. 1 registered
> pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
> EDAC MC: Ver: 3.0.0
> PCI: Using ACPI for IRQ routing
> PCI: pci_cache_line_size set to 64 bytes
> e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
> e820: reserve RAM buffer [mem 0xaf70b000-0xafffffff]
> e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> clocksource: Switched to clocksource tsc-early
> *** VALIDATE ramfs ***
> *** VALIDATE hugetlbfs ***
> pnp: PnP ACPI init
> system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
> system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
> system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
> system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
> system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
> system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
> system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
> system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
> system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
> system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
> system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
> system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
> system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
> system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
> system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
> system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
> system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
> system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
> system 00:01: [io 0x1800-0x189f] has been reserved
> system 00:01: [io 0x0800-0x087f] has been reserved
> system 00:01: [io 0x0880-0x08ff] has been reserved
> system 00:01: [io 0x0900-0x097f] has been reserved
> system 00:01: [io 0x0980-0x09ff] has been reserved
> system 00:01: [io 0x0a00-0x0a7f] has been reserved
> system 00:01: [io 0x0a80-0x0aff] has been reserved
> system 00:01: [io 0x0b00-0x0b7f] has been reserved
> system 00:01: [io 0x0b80-0x0bff] has been reserved
> system 00:01: [io 0x15e0-0x15ef] has been reserved
> system 00:01: [io 0x1600-0x167f] has been reserved
> system 00:01: [io 0x1640-0x165f] has been reserved
> system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>
> --
> Toralf
>
--
~Randy
Reported-by: Randy Dunlap <[email protected]>
On Friday, April 17, 2020 5:17:17 PM CEST Randy Dunlap wrote:
> [add Cc's]
>
> On 4/17/20 8:10 AM, Toralf F?rster wrote:
> > At a T440s under hardened Gentoo Linux I' faced with this new spew (system seems to be working fine otherwise):
> >
> >
> > pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff]
> > pci 0000:02:00.0: supports D1 D2
> > pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
> > pci 0000:00:1c.0: PCI bridge to [bus 02]
> > pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
> > pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
> > pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
> > pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.1: PCI bridge to [bus 03]
> > pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
> > ACPI: EC: interrupt unblocked
> > ACPI: EC: event unblocked
> > ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> > ACPI: EC: GPE=0x25
> > ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
> > ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
> > ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> > ACPI: EC: GPE=0x25
> > ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
> > ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
> > ------------[ cut here ]------------
> > Could not request EC data io port 0x62
> > WARNING: CPU: 0 PID: 1 at drivers/acpi/ec.c:1677 acpi_ec_add+0x26e/0x280
> > Modules linked in:
> > CPU: 0 PID: 1 Comm: swapper/0 Tainted: G T 5.6.5 #5
> > Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
> > RIP: 0010:acpi_ec_add+0x26e/0x280
> > Code: fe ff ff 48 8b 75 10 48 c7 c7 d0 27 9b 8d e8 81 c7 b6 ff 0f 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 9b 8d e8 6a c7 b6 ff <0f> 0b e9 8a fe ff ff 41 bc f4 ff ff ff e9 ac fe ff ff 48 83 3d f8
> > RSP: 0000:ffffb45b40053c80 EFLAGS: 00010282
> > RAX: 0000000000000000 RBX: ffffa2827012b800 RCX: 0000000000000000
> > RDX: 0000000000000026 RSI: ffffffff8e26f666 RDI: ffffffff8e26fa66
> > RBP: ffffa282709b4b00 R08: 0000000089294f76 R09: 0000000000000026
> > R10: 000000000000000f R11: ffffb45b40053aa8 R12: 0000000000000000
> > R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
> > FS: 0000000000000000(0000) GS:ffffa28272600000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: ffffa2827e5ff000 CR3: 000000008e80a001 CR4: 00000000001606f0
> > Call Trace:
> > acpi_device_probe+0x40/0x100
> > really_probe+0xe8/0x2d0
> > driver_probe_device+0x57/0xd0
> > ? driver_allows_async_probing+0x50/0x50
> > bus_for_each_drv+0x90/0xe0
> > __device_attach+0xea/0x160
> > acpi_bus_register_early_device+0x4b/0x70
> > acpi_ec_init+0x2ee/0x361
> > acpi_init+0x410/0x4a0
> > ? acpi_sleep_proc_init+0x4c/0x4c
> > do_one_initcall+0x93/0x1f0
> > kernel_init_freeable+0x3e7/0x4cc
> > ? rest_init+0xc0/0xc0
> > kernel_init+0x6/0x110
> > ? rest_init+0xc0/0xc0
> > ret_from_fork+0x35/0x40
> > ---[ end trace cd90af9f64ca9345 ]---
> > ------------[ cut here ]------------
> > Could not request EC cmd io port 0x66
> > WARNING: CPU: 0 PID: 1 at drivers/acpi/ec.c:1679 acpi_ec_add+0x257/0x280
> > Modules linked in:
> > CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W T 5.6.5 #5
> > Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
> > RIP: 0010:acpi_ec_add+0x257/0x280
> > Code: 8b 55 00 48 89 ef 48 89 10 e8 65 e0 ff ff 48 8b 2d 4e d7 3b 01 e9 4a fe ff ff 48 8b 75 10 48 c7 c7 d0 27 9b 8d e8 81 c7 b6 ff <0f> 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 9b 8d e8 6a c7 b6
> > RAX: 0000000000000000 RBX: ffffa2827012b800 RCX: 0000000000000000
> > RDX: 0000000000000025 RSI: ffffffff8e26f665 RDI: ffffffff8e26fa65
> > RBP: ffffa282709b4b00 R08: 000000008935c8e8 R09: 0000000000000025
> > R10: 000000000000000f R11: ffffb45b40053aa8 R12: 0000000000000000
> > R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
> > FS: 0000000000000000(0000) GS:ffffa28272600000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: ffffa2827e5ff000 CR3: 000000008e80a001 CR4: 00000000001606f0
> > Call Trace:
> > acpi_device_probe+0x40/0x100
> > really_probe+0xe8/0x2d0
> > driver_probe_device+0x57/0xd0
> > ? driver_allows_async_probing+0x50/0x50
> > bus_for_each_drv+0x90/0xe0
> > __device_attach+0xea/0x160
> > acpi_bus_register_early_device+0x4b/0x70
> > acpi_ec_init+0x2ee/0x361
> > acpi_init+0x410/0x4a0
> > ? acpi_sleep_proc_init+0x4c/0x4c
> > do_one_initcall+0x93/0x1f0
> > kernel_init_freeable+0x3e7/0x4cc
> > ? rest_init+0xc0/0xc0
> > kernel_init+0x6/0x110
> > ? rest_init+0xc0/0xc0
> > ret_from_fork+0x35/0x40
> > ---[ end trace cd90af9f64ca9346 ]---
> > iommu: Default domain type: Translated
> > pci 0000:00:02.0: vgaarb: setting as boot VGA device
> > pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> > pci 0000:00:02.0: vgaarb: bridge control possible
> > vgaarb: loaded
> > SCSI subsystem initialized
> > libata version 3.00 loaded.
> > ACPI: bus type USB registered
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > pps_core: LinuxPPS API ver. 1 registered
> > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
> > EDAC MC: Ver: 3.0.0
> > PCI: Using ACPI for IRQ routing
> > PCI: pci_cache_line_size set to 64 bytes
> > e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
> > e820: reserve RAM buffer [mem 0xaf70b000-0xafffffff]
> > e820: reserve RAM buffer [mem 0x33e600000-0x33fffffff]
> > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> > hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> > clocksource: Switched to clocksource tsc-early
> > *** VALIDATE ramfs ***
> > *** VALIDATE hugetlbfs ***
> > pnp: PnP ACPI init
> > system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
> > system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
> > system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
> > system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
> > system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
> > system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
> > system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
> > system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
> > system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
> > system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
> > system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
> > system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
> > system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
> > system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
> > system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
> > system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
> > system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
> > system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
> > pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
> > system 00:01: [io 0x1800-0x189f] has been reserved
> > system 00:01: [io 0x0800-0x087f] has been reserved
> > system 00:01: [io 0x0880-0x08ff] has been reserved
> > system 00:01: [io 0x0900-0x097f] has been reserved
> > system 00:01: [io 0x0980-0x09ff] has been reserved
> > system 00:01: [io 0x0a00-0x0a7f] has been reserved
> > system 00:01: [io 0x0a80-0x0aff] has been reserved
> > system 00:01: [io 0x0b00-0x0b7f] has been reserved
> > system 00:01: [io 0x0b80-0x0bff] has been reserved
> > system 00:01: [io 0x15e0-0x15ef] has been reserved
> > system 00:01: [io 0x1600-0x167f] has been reserved
> > system 00:01: [io 0x1640-0x165f] has been reserved
> > system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
Does the patch below (untested) make any difference?
---
drivers/acpi/ec.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
Index: linux-pm/drivers/acpi/ec.c
===================================================================
--- linux-pm.orig/drivers/acpi/ec.c
+++ linux-pm/drivers/acpi/ec.c
@@ -2067,7 +2067,10 @@ static struct acpi_driver acpi_ec_driver
.add = acpi_ec_add,
.remove = acpi_ec_remove,
},
- .drv.pm = &acpi_ec_pm,
+ .drv = {
+ .probe_type = PROBE_FORCE_SYNCHRONOUS,
+ .pm = &acpi_ec_pm,
+ },
};
static void acpi_ec_destroy_workqueues(void)
On 4/17/20 5:53 PM, Rafael J. Wysocki wrote:
> Does the patch below (untested) make any difference?
>
> ---
> drivers/acpi/ec.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> Index: linux-pm/drivers/acpi/ec.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/ec.c
> +++ linux-pm/drivers/acpi/ec.c
> @@ -2067,7 +2067,10 @@ static struct acpi_driver acpi_ec_driver
> .add = acpi_ec_add,
> .remove = acpi_ec_remove,
> },
> - .drv.pm = &acpi_ec_pm,
> + .drv = {
> + .probe_type = PROBE_FORCE_SYNCHRONOUS,
> + .pm = &acpi_ec_pm,
> + },
> };
>
> static void acpi_ec_destroy_workqueues(void)
I'd say no, but for completeness:
pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x25
ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: EC: GPE=0x25
ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete
ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events
------------[ cut here ]------------
Could not request EC data io port 0x62
WARNING: CPU: 2 PID: 1 at drivers/acpi/ec.c:1677 acpi_ec_add+0x26e/0x280
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Tainted: G T 5.6.5 #6
Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
RIP: 0010:acpi_ec_add+0x26e/0x280
Code: fe ff ff 48 8b 75 10 48 c7 c7 d0 27 7b b2 e8 81 c7 b6 ff 0f 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 7b b2 e8 6a c7 b6 ff <0f> 0b e9 8a fe ff ff 41 bc f4 ff ff ff e9 ac fe ff ff 48 83 3d f8
RSP: 0000:ffffa7e980053c80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa359700b3800 RCX: 0000000000000000
RDX: 0000000000000026 RSI: ffffffffb306f666 RDI: ffffffffb306fa66
RBP: ffffa35970ab6300 R08: 00000000894e0463 R09: 0000000000000026
R10: 000000000000000f R11: ffffa7e980053aa8 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
FS: 0000000000000000(0000) GS:ffffa35972700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001a480a001 CR4: 00000000001606e0
Call Trace:
acpi_device_probe+0x40/0x100
really_probe+0xe8/0x2d0
driver_probe_device+0x57/0xd0
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x90/0xe0
__device_attach+0xea/0x160
acpi_bus_register_early_device+0x4b/0x70
acpi_ec_init+0x2ee/0x361
acpi_init+0x410/0x4a0
? acpi_sleep_proc_init+0x4c/0x4c
do_one_initcall+0x93/0x1f0
kernel_init_freeable+0x3e7/0x4cc
? rest_init+0xc0/0xc0
kernel_init+0x6/0x110
? rest_init+0xc0/0xc0
ret_from_fork+0x35/0x40
---[ end trace a946e45fe1b78ebc ]---
------------[ cut here ]------------
Could not request EC cmd io port 0x66
WARNING: CPU: 2 PID: 1 at drivers/acpi/ec.c:1679 acpi_ec_add+0x257/0x280
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W T 5.6.5 #6
Hardware name: LENOVO 20AQCTO1WW/20AQCTO1WW, BIOS GJET92WW (2.42 ) 03/03/2017
RIP: 0010:acpi_ec_add+0x257/0x280
Code: 8b 55 00 48 89 ef 48 89 10 e8 65 e0 ff ff 48 8b 2d 4e d7 3b 01 e9 4a fe ff ff 48 8b 75 10 48 c7 c7 d0 27 7b b2 e8 81 c7 b6 ff <0f> 0b e9 c9 fe ff ff 48 8b 75 18 48 c7 c7 a8 27 7b b2 e8 6a c7 b6
RSP: 0000:ffffa7e980053c80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffa359700b3800 RCX: 0000000000000000
RDX: 0000000000000025 RSI: ffffffffb306f665 RDI: ffffffffb306fa65
RBP: ffffa35970ab6300 R08: 000000008997875e R09: 0000000000000025
R10: 000000000000000f R11: ffffa7e980053aa8 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000030
FS: 0000000000000000(0000) GS:ffffa35972700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001a480a001 CR4: 00000000001606e0
Call Trace:
acpi_device_probe+0x40/0x100
really_probe+0xe8/0x2d0
driver_probe_device+0x57/0xd0
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x90/0xe0
__device_attach+0xea/0x160
acpi_bus_register_early_device+0x4b/0x70
acpi_ec_init+0x2ee/0x361
acpi_init+0x410/0x4a0
? acpi_sleep_proc_init+0x4c/0x4c
do_one_initcall+0x93/0x1f0
kernel_init_freeable+0x3e7/0x4cc
? rest_init+0xc0/0xc0
kernel_init+0x6/0x110
? rest_init+0xc0/0xc0
ret_from_fork+0x35/0x40
---[ end trace a946e45fe1b78ebd ]---
iommu: Default domain type: Translated
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
--
Toralf
On Fri, Apr 17, 2020 at 6:36 PM Toralf Förster <[email protected]> wrote:
>
> On 4/17/20 5:53 PM, Rafael J. Wysocki wrote:
> > Does the patch below (untested) make any difference?
> >
> > ---
> > drivers/acpi/ec.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > Index: linux-pm/drivers/acpi/ec.c
> > ===================================================================
> > --- linux-pm.orig/drivers/acpi/ec.c
> > +++ linux-pm/drivers/acpi/ec.c
> > @@ -2067,7 +2067,10 @@ static struct acpi_driver acpi_ec_driver
> > .add = acpi_ec_add,
> > .remove = acpi_ec_remove,
> > },
> > - .drv.pm = &acpi_ec_pm,
> > + .drv = {
> > + .probe_type = PROBE_FORCE_SYNCHRONOUS,
> > + .pm = &acpi_ec_pm,
> > + },
> > };
> >
> > static void acpi_ec_destroy_workqueues(void)
> I'd say no, but for completeness:
OK, it looks like mainline commit
65a691f5f8f0 ("ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()")
was backported into 5.6.5 by mistake.
Can you please revert that patch and retest?
On 4/17/20 8:52 PM, Rafael J. Wysocki wrote:
> On Fri, Apr 17, 2020 at 6:36 PM Toralf Förster <[email protected]> wrote:
>>
>> On 4/17/20 5:53 PM, Rafael J. Wysocki wrote:
>>> Does the patch below (untested) make any difference?
>>>
>>> ---
>>> drivers/acpi/ec.c | 5 ++++-
>>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> Index: linux-pm/drivers/acpi/ec.c
>>> ===================================================================
>>> --- linux-pm.orig/drivers/acpi/ec.c
>>> +++ linux-pm/drivers/acpi/ec.c
>>> @@ -2067,7 +2067,10 @@ static struct acpi_driver acpi_ec_driver
>>> .add = acpi_ec_add,
>>> .remove = acpi_ec_remove,
>>> },
>>> - .drv.pm = &acpi_ec_pm,
>>> + .drv = {
>>> + .probe_type = PROBE_FORCE_SYNCHRONOUS,
>>> + .pm = &acpi_ec_pm,
>>> + },
>>> };
>>>
>>> static void acpi_ec_destroy_workqueues(void)
>> I'd say no, but for completeness:
>
> OK, it looks like mainline commit
>
> 65a691f5f8f0 ("ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()")
>
> was backported into 5.6.5 by mistake.
>
> Can you please revert that patch and retest?
>
Yes, reverting that commit solved the issue.
--
Toralf
On Fri, Apr 17, 2020 at 9:41 PM Toralf Förster <[email protected]> wrote:
>
> On 4/17/20 8:52 PM, Rafael J. Wysocki wrote:
> > On Fri, Apr 17, 2020 at 6:36 PM Toralf Förster <[email protected]> wrote:
> >>
> >> On 4/17/20 5:53 PM, Rafael J. Wysocki wrote:
> >>> Does the patch below (untested) make any difference?
> >>>
> >>> ---
> >>> drivers/acpi/ec.c | 5 ++++-
> >>> 1 file changed, 4 insertions(+), 1 deletion(-)
> >>>
> >>> Index: linux-pm/drivers/acpi/ec.c
> >>> ===================================================================
> >>> --- linux-pm.orig/drivers/acpi/ec.c
> >>> +++ linux-pm/drivers/acpi/ec.c
> >>> @@ -2067,7 +2067,10 @@ static struct acpi_driver acpi_ec_driver
> >>> .add = acpi_ec_add,
> >>> .remove = acpi_ec_remove,
> >>> },
> >>> - .drv.pm = &acpi_ec_pm,
> >>> + .drv = {
> >>> + .probe_type = PROBE_FORCE_SYNCHRONOUS,
> >>> + .pm = &acpi_ec_pm,
> >>> + },
> >>> };
> >>>
> >>> static void acpi_ec_destroy_workqueues(void)
> >> I'd say no, but for completeness:
> >
> > OK, it looks like mainline commit
> >
> > 65a691f5f8f0 ("ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()")
> >
> > was backported into 5.6.5 by mistake.
> >
> > Can you please revert that patch and retest?
> >
> Yes, reverting that commit solved the issue.
OK, thanks!
Greg, I'm not sure why commit 65a691f5f8f0 from the mainline ended up in 5.6.5.
It has not been marked for -stable or otherwise requested to be
included AFAICS. Also it depends on other mainline commits that have
not been included into 5.6.5.
Can you please drop it?
On Fri, Apr 17, 2020 at 09:54:54PM +0200, Rafael J. Wysocki wrote:
> On Fri, Apr 17, 2020 at 9:41 PM Toralf F?rster <[email protected]> wrote:
> >
> > On 4/17/20 8:52 PM, Rafael J. Wysocki wrote:
> > > On Fri, Apr 17, 2020 at 6:36 PM Toralf F?rster <[email protected]> wrote:
> > >>
> > >> On 4/17/20 5:53 PM, Rafael J. Wysocki wrote:
> > >>> Does the patch below (untested) make any difference?
> > >>>
> > >>> ---
> > >>> drivers/acpi/ec.c | 5 ++++-
> > >>> 1 file changed, 4 insertions(+), 1 deletion(-)
> > >>>
> > >>> Index: linux-pm/drivers/acpi/ec.c
> > >>> ===================================================================
> > >>> --- linux-pm.orig/drivers/acpi/ec.c
> > >>> +++ linux-pm/drivers/acpi/ec.c
> > >>> @@ -2067,7 +2067,10 @@ static struct acpi_driver acpi_ec_driver
> > >>> .add = acpi_ec_add,
> > >>> .remove = acpi_ec_remove,
> > >>> },
> > >>> - .drv.pm = &acpi_ec_pm,
> > >>> + .drv = {
> > >>> + .probe_type = PROBE_FORCE_SYNCHRONOUS,
> > >>> + .pm = &acpi_ec_pm,
> > >>> + },
> > >>> };
> > >>>
> > >>> static void acpi_ec_destroy_workqueues(void)
> > >> I'd say no, but for completeness:
> > >
> > > OK, it looks like mainline commit
> > >
> > > 65a691f5f8f0 ("ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()")
> > >
> > > was backported into 5.6.5 by mistake.
> > >
> > > Can you please revert that patch and retest?
> > >
> > Yes, reverting that commit solved the issue.
>
> OK, thanks!
>
> Greg, I'm not sure why commit 65a691f5f8f0 from the mainline ended up in 5.6.5.
>
> It has not been marked for -stable or otherwise requested to be
> included AFAICS. Also it depends on other mainline commits that have
> not been included into 5.6.5.
>
> Can you please drop it?
Will go do so right now, sorry about that. Sasha, you might want to
adjust your tools a bit...