Arnd, Olof, Kevin,
An AT91 fixes batch for 3.16 that collects mainly DT modifications in relation
to the recent move to CCF on a couple of platforms.
The recent modifications also lead us to add tiny DT corrections that enable
available features like sound or DMA use for 9rl NAND.
As the previous "fixes" pull-request will be re-spin for 3.17 and shall be
ignored, I use the same tag name "at91-fixes".
Thanks, best regards,
The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git tags/at91-fixes
for you to fetch changes up to fe6076a70dd7b50598a6b5ad7dad03f9322ecec9:
ARM: at91/dt: sama5d3 crystals under the clocks node (2014-06-25 13:50:47 +0200)
----------------------------------------------------------------
First AT91 fixes batch for 3.16:
- drivers/misc fix for Kconfig PWM symbol
- addition of DMA and DMA + nand on at91sam9rl
- correction of several values in DT after conversion to CCF
- addition of clock entries for sound for CCF enabled platforms
- little defconfig update for sound in relation with previous item
- move of crystals DT definitions to the /clocks node
----------------------------------------------------------------
Alexandre Belloni (9):
ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
ARM: at91/dt: sam9261: correctly define mainck
ARM: at91/dt: define sam9261ek slow crystal frequency
ARM: at91/dt: sam9261 crystals under the clocks node
ARM: at91/dt: sam9n12 crystals under the clocks node
ARM: at91/dt: sam9rl crystals under the clocks node
ARM: at91/dt: sam9x5 crystals under the clocks node
ARM: at91/dt: sama5d3 crystals under the clocks node
Bo Shen (4):
ARM: at91: sama5d3xek: switch sound to CCF
ARM: at91: at91sam9n12ek: switch sound to CCF
ARM: at91/at91_dt_defconfig: enable sound support
ARM: at91/sama5_defconfig: enable sound support
Nicolas Ferre (3):
misc: atmel_pwm: fix Kconfig symbols
ARM: at91/dt: add DMA controller node to at91sam9rl
ARM: at91/dt: add NAND + DMA property for at91sam9rl
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 12 +++++-----
arch/arm/boot/dts/at91sam9261.dtsi | 30 +++++++++++++++----------
arch/arm/boot/dts/at91sam9261ek.dts | 12 ++++++----
arch/arm/boot/dts/at91sam9n12.dtsi | 24 ++++++++++----------
arch/arm/boot/dts/at91sam9n12ek.dts | 18 ++++++++-------
arch/arm/boot/dts/at91sam9rl.dtsi | 32 +++++++++++++++++----------
arch/arm/boot/dts/at91sam9rlek.dts | 17 +++++++--------
arch/arm/boot/dts/at91sam9x5.dtsi | 34 +++++++++++++++--------------
arch/arm/boot/dts/at91sam9x5cm.dtsi | 12 +++++-----
arch/arm/boot/dts/sama5d3.dtsi | 22 +++++++++----------
arch/arm/boot/dts/sama5d3xcm.dtsi | 12 +++++-----
arch/arm/boot/dts/sama5d3xmb.dtsi | 2 ++
arch/arm/configs/at91_dt_defconfig | 10 +++++++++
arch/arm/configs/sama5_defconfig | 5 +++++
drivers/misc/Kconfig | 2 +-
15 files changed, 147 insertions(+), 97 deletions(-)
--
Nicolas Ferre
On 25/06/2014 14:39, Nicolas Ferre :
> Arnd, Olof, Kevin,
>
> An AT91 fixes batch for 3.16 that collects mainly DT modifications in relation
> to the recent move to CCF on a couple of platforms.
> The recent modifications also lead us to add tiny DT corrections that enable
> available features like sound or DMA use for 9rl NAND.
>
> As the previous "fixes" pull-request will be re-spin for 3.17 and shall be
> ignored, I use the same tag name "at91-fixes".
>
> Thanks, best regards,
>
> The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
>
> Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
>
> are available in the git repository at:
>
> git://github.com/at91linux/linux-at91.git tags/at91-fixes
>
> for you to fetch changes up to fe6076a70dd7b50598a6b5ad7dad03f9322ecec9:
>
> ARM: at91/dt: sama5d3 crystals under the clocks node (2014-06-25 13:50:47 +0200)
>
> ----------------------------------------------------------------
> First AT91 fixes batch for 3.16:
> - drivers/misc fix for Kconfig PWM symbol
> - addition of DMA and DMA + nand on at91sam9rl
> - correction of several values in DT after conversion to CCF
> - addition of clock entries for sound for CCF enabled platforms
> - little defconfig update for sound in relation with previous item
> - move of crystals DT definitions to the /clocks node
Some material is targeted for 3.17. I'll re-spin this for inclusion in
next kernel release.
So, ignore again this pull-request: I've just sent the "ter" ;-)
Sorry for the noise, bye,
> ----------------------------------------------------------------
> Alexandre Belloni (9):
> ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values
> ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
> ARM: at91/dt: sam9261: correctly define mainck
> ARM: at91/dt: define sam9261ek slow crystal frequency
> ARM: at91/dt: sam9261 crystals under the clocks node
> ARM: at91/dt: sam9n12 crystals under the clocks node
> ARM: at91/dt: sam9rl crystals under the clocks node
> ARM: at91/dt: sam9x5 crystals under the clocks node
> ARM: at91/dt: sama5d3 crystals under the clocks node
>
> Bo Shen (4):
> ARM: at91: sama5d3xek: switch sound to CCF
> ARM: at91: at91sam9n12ek: switch sound to CCF
> ARM: at91/at91_dt_defconfig: enable sound support
> ARM: at91/sama5_defconfig: enable sound support
>
> Nicolas Ferre (3):
> misc: atmel_pwm: fix Kconfig symbols
> ARM: at91/dt: add DMA controller node to at91sam9rl
> ARM: at91/dt: add NAND + DMA property for at91sam9rl
>
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 12 +++++-----
> arch/arm/boot/dts/at91sam9261.dtsi | 30 +++++++++++++++----------
> arch/arm/boot/dts/at91sam9261ek.dts | 12 ++++++----
> arch/arm/boot/dts/at91sam9n12.dtsi | 24 ++++++++++----------
> arch/arm/boot/dts/at91sam9n12ek.dts | 18 ++++++++-------
> arch/arm/boot/dts/at91sam9rl.dtsi | 32 +++++++++++++++++----------
> arch/arm/boot/dts/at91sam9rlek.dts | 17 +++++++--------
> arch/arm/boot/dts/at91sam9x5.dtsi | 34 +++++++++++++++--------------
> arch/arm/boot/dts/at91sam9x5cm.dtsi | 12 +++++-----
> arch/arm/boot/dts/sama5d3.dtsi | 22 +++++++++----------
> arch/arm/boot/dts/sama5d3xcm.dtsi | 12 +++++-----
> arch/arm/boot/dts/sama5d3xmb.dtsi | 2 ++
> arch/arm/configs/at91_dt_defconfig | 10 +++++++++
> arch/arm/configs/sama5_defconfig | 5 +++++
> drivers/misc/Kconfig | 2 +-
> 15 files changed, 147 insertions(+), 97 deletions(-)
>
--
Nicolas Ferre