The code has a variable to change the polarity of the PWM backlight control but
it was not being initialized. This patch adds a devicetree entry to set the
variable if required.
Signed-off-by: Michael Welling <[email protected]>
---
.../devicetree/bindings/video/atmel,lcdc.txt | 1 +
drivers/video/fbdev/atmel_lcdfb.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
index 1ec175e..b75af94 100644
--- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
@@ -46,6 +46,7 @@ Required properties (as per of_videomode_helper):
Optional properties (as per of_videomode_helper):
- atmel,lcdcon-backlight: enable backlight
+ - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
- atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index d36e830..92640d4 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -290,7 +290,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo)
/* contrast pwm can be 'inverted' */
if (pdata->lcdcon_pol_negative)
- contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
+ contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
/* have some default contrast/backlight settings */
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
@@ -1097,6 +1097,7 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
pdata->lcd_wiring_mode = ret;
pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
+ pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted");
timings = of_get_display_timings(display_np);
if (!timings) {
--
1.7.9.5
On 04/07/2014 04:26, Michael Welling :
> The code has a variable to change the polarity of the PWM backlight control but
> it was not being initialized. This patch adds a devicetree entry to set the
> variable if required.
>
> Signed-off-by: Michael Welling <[email protected]>
Seems good
Acked-by: Nicolas Ferre <[email protected]>
> ---
> .../devicetree/bindings/video/atmel,lcdc.txt | 1 +
> drivers/video/fbdev/atmel_lcdfb.c | 3 ++-
> 2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
> index 1ec175e..b75af94 100644
> --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt
> +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
> @@ -46,6 +46,7 @@ Required properties (as per of_videomode_helper):
>
> Optional properties (as per of_videomode_helper):
> - atmel,lcdcon-backlight: enable backlight
> + - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
> - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
> - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
>
> diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
> index d36e830..92640d4 100644
> --- a/drivers/video/fbdev/atmel_lcdfb.c
> +++ b/drivers/video/fbdev/atmel_lcdfb.c
> @@ -290,7 +290,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo)
>
> /* contrast pwm can be 'inverted' */
> if (pdata->lcdcon_pol_negative)
> - contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
> + contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
>
> /* have some default contrast/backlight settings */
> lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
> @@ -1097,6 +1097,7 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
> pdata->lcd_wiring_mode = ret;
>
> pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
> + pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted");
>
> timings = of_get_display_timings(display_np);
> if (!timings) {
>
--
Nicolas Ferre
On 04/07/14 05:26, Michael Welling wrote:
> The code has a variable to change the polarity of the PWM backlight control but
> it was not being initialized. This patch adds a devicetree entry to set the
> variable if required.
>
> Signed-off-by: Michael Welling <[email protected]>
> ---
> .../devicetree/bindings/video/atmel,lcdc.txt | 1 +
> drivers/video/fbdev/atmel_lcdfb.c | 3 ++-
> 2 files changed, 3 insertions(+), 1 deletion(-)
Thanks, queued for 3.17.
Tomi