In IBM Power servers, when hardware error occurs during probe
state, EEH subsystem will call driver's error_detected interface,
which will call pci_disable_device(). But driver's probe function also
call pci_disable_device() in this situation.
So pci_dev will be disabled twice:
Device lpfc disabling already-disabled device
------------[ cut here ]------------
WARNING: at drivers/pci/pci.c:1407
CPU: 0 PID: 8744 Comm: kworker/0:0 Tainted: G W 3.10.42-2002.pkvm2_1_1.6.ppc64 #1
Workqueue: events .work_for_cpu_fn
task: c00000274e3f5400 ti: c0000027d3958000 task.ti: c0000027d3958000
NIP: c000000000471b8c LR: c000000000471b88 CTR: c00000000043ebe0
REGS: c0000027d395b650 TRAP: 0700 Tainted: G W (3.10.42-2002.pkvm2_1_1.6.ppc64)
MSR: 9000000100029032 <SF,HV,EE,ME,IR,DR,RI> CR: 28b52b44 XER: 20000000
CFAR: c000000000879ab8 SOFTE: 1
...
NIP .pci_disable_device+0xcc/0xe0
LR .pci_disable_device+0xc8/0xe0
Call Trace:
.pci_disable_device+0xc8/0xe0 (unreliable)
.lpfc_disable_pci_dev+0x50/0x80 [lpfc]
.lpfc_pci_probe_one+0x870/0x21a0 [lpfc]
.local_pci_probe+0x68/0xb0
.work_for_cpu_fn+0x38/0x60
.process_one_work+0x1a4/0x4d0
.worker_thread+0x37c/0x490
.kthread+0xf0/0x100
.ret_from_kernel_thread+0x5c/0x80
Signed-off-by: Mike Qiu <[email protected]>
---
drivers/scsi/lpfc/lpfc.h | 1 +
drivers/scsi/lpfc/lpfc_init.c | 59 +++++++++++++++++++++++++++++++++++++++----
2 files changed, 55 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 434e903..0c7bad9 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -813,6 +813,7 @@ struct lpfc_hba {
#define VPD_MASK 0xf /* mask for any vpd data */
uint8_t soft_wwn_enable;
+ uint8_t probe_done;
struct timer_list fcp_poll_timer;
struct timer_list eratt_poll;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 06f9a5b..c2e67ae 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -9519,6 +9519,9 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
}
}
+ /* Set the probe flag */
+ phba->probe_done = 1;
+
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
@@ -9795,6 +9798,9 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
static void
lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
{
+ if (phba)
+ return;
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2710 PCI channel disable preparing for reset\n");
@@ -9812,7 +9818,8 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
/* Disable interrupt and pci device */
lpfc_sli_disable_intr(phba);
- pci_disable_device(phba->pcidev);
+ if (phba->probe_done && phba->pcidev)
+ pci_disable_device(phba->pcidev);
}
/**
@@ -10282,6 +10289,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
goto out_disable_intr;
}
+ /* Set probe_done flag */
+ phba->probe_done = 1;
+
/* Log the current active interrupt mode */
phba->intr_mode = intr_mode;
lpfc_log_intr_mode(phba, intr_mode);
@@ -10544,6 +10554,9 @@ lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
static void
lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
{
+ if (!phba)
+ return;
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2826 PCI channel disable preparing for reset\n");
@@ -10562,7 +10575,9 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
/* Disable interrupt and pci device */
lpfc_sli4_disable_intr(phba);
lpfc_sli4_queue_destroy(phba);
- pci_disable_device(phba->pcidev);
+
+ if (phba->probe_done && phba->pcidev)
+ pci_disable_device(phba->pcidev);
}
/**
@@ -10893,9 +10908,21 @@ static pci_ers_result_t
lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ struct lpfc_hba *phba;
pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+ if (!shost)
+ /* Run here means it may during probe state and
+ * Scsi_Host has not been created and We can do nothing
+ * in this state so call for hotplug*/
+ return PCI_ERS_RESULT_NONE;
+
+ phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ if (!phba || !phba->probe_done)
+ /* Run here means it may during probe state */
+ return PCI_ERS_RESULT_NONE;
+
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
rc = lpfc_io_error_detected_s3(pdev, state);
@@ -10930,9 +10957,20 @@ static pci_ers_result_t
lpfc_io_slot_reset(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ struct lpfc_hba *phba;
pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+ if (!shost)
+ /* Run here means it may during probe state and
+ * Scsi_Host has not been created */
+ return PCI_ERS_RESULT_NONE;
+
+ phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ if (!phba || !phba->probe_done)
+ /* Run here means it may during probe state */
+ return PCI_ERS_RESULT_NONE;
+
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
rc = lpfc_io_slot_reset_s3(pdev);
@@ -10963,7 +11001,18 @@ static void
lpfc_io_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
- struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ struct lpfc_hba *phba;
+
+ if (!shost)
+ /* Run here means it may during probe state and
+ * Scsi_Host has not been created */
+ return;
+
+ phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ if (!phba || !phba->probe_done)
+ /* Run here means it may during probe state */
+ return;
switch (phba->pci_dev_grp) {
case LPFC_PCI_DEV_LP:
--
1.8.1.4
[ +cc linux-pci and Bjorn, comments inline/below ... ]
On Thu, 17 Jul 2014 02:32:31 -0400
Mike Qiu <[email protected]> wrote:
> In IBM Power servers, when hardware error occurs during probe
> state, EEH subsystem will call driver's error_detected interface,
> which will call pci_disable_device(). But driver's probe function also
> call pci_disable_device() in this situation.
>
> So pci_dev will be disabled twice:
>
> Device lpfc disabling already-disabled device
> ------------[ cut here ]------------
> WARNING: at drivers/pci/pci.c:1407
> CPU: 0 PID: 8744 Comm: kworker/0:0 Tainted: G W 3.10.42-2002.pkvm2_1_1.6.ppc64 #1
> Workqueue: events .work_for_cpu_fn
> task: c00000274e3f5400 ti: c0000027d3958000 task.ti: c0000027d3958000
> NIP: c000000000471b8c LR: c000000000471b88 CTR: c00000000043ebe0
> REGS: c0000027d395b650 TRAP: 0700 Tainted: G W (3.10.42-2002.pkvm2_1_1.6.ppc64)
> MSR: 9000000100029032 <SF,HV,EE,ME,IR,DR,RI> CR: 28b52b44 XER: 20000000
> CFAR: c000000000879ab8 SOFTE: 1
> ...
> NIP .pci_disable_device+0xcc/0xe0
> LR .pci_disable_device+0xc8/0xe0
> Call Trace:
> .pci_disable_device+0xc8/0xe0 (unreliable)
> .lpfc_disable_pci_dev+0x50/0x80 [lpfc]
> .lpfc_pci_probe_one+0x870/0x21a0 [lpfc]
> .local_pci_probe+0x68/0xb0
> .work_for_cpu_fn+0x38/0x60
> .process_one_work+0x1a4/0x4d0
> .worker_thread+0x37c/0x490
> .kthread+0xf0/0x100
> .ret_from_kernel_thread+0x5c/0x80
>
> Signed-off-by: Mike Qiu <[email protected]>
> ---
> drivers/scsi/lpfc/lpfc.h | 1 +
> drivers/scsi/lpfc/lpfc_init.c | 59 +++++++++++++++++++++++++++++++++++++++----
> 2 files changed, 55 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
> index 434e903..0c7bad9 100644
> --- a/drivers/scsi/lpfc/lpfc.h
> +++ b/drivers/scsi/lpfc/lpfc.h
> @@ -813,6 +813,7 @@ struct lpfc_hba {
> #define VPD_MASK 0xf /* mask for any vpd data */
>
> uint8_t soft_wwn_enable;
> + uint8_t probe_done;
>
> struct timer_list fcp_poll_timer;
> struct timer_list eratt_poll;
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index 06f9a5b..c2e67ae 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -9519,6 +9519,9 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
> }
> }
>
> + /* Set the probe flag */
> + phba->probe_done = 1;
> +
> /* Perform post initialization setup */
> lpfc_post_init_setup(phba);
>
> @@ -9795,6 +9798,9 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
> static void
> lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
> {
> + if (phba)
> + return;
> +
Should that be "if *not* phba" like the others below?
> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> "2710 PCI channel disable preparing for reset\n");
>
> @@ -9812,7 +9818,8 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
>
> /* Disable interrupt and pci device */
> lpfc_sli_disable_intr(phba);
> - pci_disable_device(phba->pcidev);
> + if (phba->probe_done && phba->pcidev)
> + pci_disable_device(phba->pcidev);
> }
>
> /**
> @@ -10282,6 +10289,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
> goto out_disable_intr;
> }
>
> + /* Set probe_done flag */
> + phba->probe_done = 1;
> +
> /* Log the current active interrupt mode */
> phba->intr_mode = intr_mode;
> lpfc_log_intr_mode(phba, intr_mode);
> @@ -10544,6 +10554,9 @@ lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
> static void
> lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
> {
> + if (!phba)
> + return;
> +
> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> "2826 PCI channel disable preparing for reset\n");
>
> @@ -10562,7 +10575,9 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
> /* Disable interrupt and pci device */
> lpfc_sli4_disable_intr(phba);
> lpfc_sli4_queue_destroy(phba);
> - pci_disable_device(phba->pcidev);
> +
> + if (phba->probe_done && phba->pcidev)
> + pci_disable_device(phba->pcidev);
> }
>
> /**
> @@ -10893,9 +10908,21 @@ static pci_ers_result_t
> lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
> {
> struct Scsi_Host *shost = pci_get_drvdata(pdev);
> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> + struct lpfc_hba *phba;
> pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
>
> + if (!shost)
> + /* Run here means it may during probe state and
> + * Scsi_Host has not been created and We can do nothing
> + * in this state so call for hotplug*/
> + return PCI_ERS_RESULT_NONE;
Is it possible to get here during device removal, ie
lpfc_pci_remove_one? If so, we may have shost in hand now, but can
these routines race? Same for similar instances below...
> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> +
> + if (!phba || !phba->probe_done)
> + /* Run here means it may during probe state */
> + return PCI_ERS_RESULT_NONE;
> +
> switch (phba->pci_dev_grp) {
> case LPFC_PCI_DEV_LP:
> rc = lpfc_io_error_detected_s3(pdev, state);
> @@ -10930,9 +10957,20 @@ static pci_ers_result_t
> lpfc_io_slot_reset(struct pci_dev *pdev)
> {
> struct Scsi_Host *shost = pci_get_drvdata(pdev);
> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> + struct lpfc_hba *phba;
> pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
>
> + if (!shost)
> + /* Run here means it may during probe state and
> + * Scsi_Host has not been created */
> + return PCI_ERS_RESULT_NONE;
> +
> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> +
> + if (!phba || !phba->probe_done)
> + /* Run here means it may during probe state */
> + return PCI_ERS_RESULT_NONE;
> +
> switch (phba->pci_dev_grp) {
> case LPFC_PCI_DEV_LP:
> rc = lpfc_io_slot_reset_s3(pdev);
> @@ -10963,7 +11001,18 @@ static void
> lpfc_io_resume(struct pci_dev *pdev)
> {
> struct Scsi_Host *shost = pci_get_drvdata(pdev);
> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> + struct lpfc_hba *phba;
> +
> + if (!shost)
> + /* Run here means it may during probe state and
> + * Scsi_Host has not been created */
> + return;
> +
> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> +
> + if (!phba || !phba->probe_done)
> + /* Run here means it may during probe state */
> + return;
>
> switch (phba->pci_dev_grp) {
> case LPFC_PCI_DEV_LP:
Hi Mike and Bjorn,
We don't support Power here at Stratus, but we do a lot of hotplug
testing, so this change is similar to some of the things we do here to
harden various device drivers against surprise device removal.
I've been curious about the AER/EEH pci_error_handler callbacks and
what protections device drivers need to take against double device
removal. In my experience, not many driver .probe routines take
precaution against hotplug (or in this case, EEH) running concurrently
-- in general they were written with the assumption that device
resources (data structures at least) will be stable during their
execution.
The introduction of the pci_error_handler callbacks makes this tougher,
as apparently they may be invoked even during driver .probe.
In the hotplug area, I've encountered code from various device drivers
that attempt to handle PCI removal on their own, verifying PCI reads
against ~0:
22a8b291 "igb: add register rd/wr for surprise removal"
2a1a091c "ixgbe: Check register reads for adapter removal"
845a0e40 "mpt2sas: Better handling DEAD IOC (PCI-E LInk down) error condition"
f3ddac19 "qla2xxx: Disable adapter when we encounter a PCI disconnect"
and in some cases, these routines race PCI device removal. Previous
Stratus products went as far as introducing a workqueue dedicated to
single threading and protecting against double and racing PCI removal
instances.
I don't mean to hijack Mike's patch review, but I'm curious if Bjorn has
any input on how AER/EEH, hotplug, and ordinary device removal should
co-exist and what drivers should do to safely operate in this space.
Regards,
-- Joe
On 07/17/2014 10:15 PM, Joe Lawrence wrote:
> [ +cc linux-pci and Bjorn, comments inline/below ... ]
>
> On Thu, 17 Jul 2014 02:32:31 -0400
> Mike Qiu <[email protected]> wrote:
>
>> In IBM Power servers, when hardware error occurs during probe
>> state, EEH subsystem will call driver's error_detected interface,
>> which will call pci_disable_device(). But driver's probe function also
>> call pci_disable_device() in this situation.
>>
>> So pci_dev will be disabled twice:
>>
>> Device lpfc disabling already-disabled device
>> ------------[ cut here ]------------
>> WARNING: at drivers/pci/pci.c:1407
>> CPU: 0 PID: 8744 Comm: kworker/0:0 Tainted: G W 3.10.42-2002.pkvm2_1_1.6.ppc64 #1
>> Workqueue: events .work_for_cpu_fn
>> task: c00000274e3f5400 ti: c0000027d3958000 task.ti: c0000027d3958000
>> NIP: c000000000471b8c LR: c000000000471b88 CTR: c00000000043ebe0
>> REGS: c0000027d395b650 TRAP: 0700 Tainted: G W (3.10.42-2002.pkvm2_1_1.6.ppc64)
>> MSR: 9000000100029032 <SF,HV,EE,ME,IR,DR,RI> CR: 28b52b44 XER: 20000000
>> CFAR: c000000000879ab8 SOFTE: 1
>> ...
>> NIP .pci_disable_device+0xcc/0xe0
>> LR .pci_disable_device+0xc8/0xe0
>> Call Trace:
>> .pci_disable_device+0xc8/0xe0 (unreliable)
>> .lpfc_disable_pci_dev+0x50/0x80 [lpfc]
>> .lpfc_pci_probe_one+0x870/0x21a0 [lpfc]
>> .local_pci_probe+0x68/0xb0
>> .work_for_cpu_fn+0x38/0x60
>> .process_one_work+0x1a4/0x4d0
>> .worker_thread+0x37c/0x490
>> .kthread+0xf0/0x100
>> .ret_from_kernel_thread+0x5c/0x80
>>
>> Signed-off-by: Mike Qiu <[email protected]>
>> ---
>> drivers/scsi/lpfc/lpfc.h | 1 +
>> drivers/scsi/lpfc/lpfc_init.c | 59 +++++++++++++++++++++++++++++++++++++++----
>> 2 files changed, 55 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
>> index 434e903..0c7bad9 100644
>> --- a/drivers/scsi/lpfc/lpfc.h
>> +++ b/drivers/scsi/lpfc/lpfc.h
>> @@ -813,6 +813,7 @@ struct lpfc_hba {
>> #define VPD_MASK 0xf /* mask for any vpd data */
>>
>> uint8_t soft_wwn_enable;
>> + uint8_t probe_done;
>>
>> struct timer_list fcp_poll_timer;
>> struct timer_list eratt_poll;
>> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
>> index 06f9a5b..c2e67ae 100644
>> --- a/drivers/scsi/lpfc/lpfc_init.c
>> +++ b/drivers/scsi/lpfc/lpfc_init.c
>> @@ -9519,6 +9519,9 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
>> }
>> }
>>
>> + /* Set the probe flag */
>> + phba->probe_done = 1;
>> +
>> /* Perform post initialization setup */
>> lpfc_post_init_setup(phba);
>>
>> @@ -9795,6 +9798,9 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
>> static void
>> lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
>> {
>> + if (phba)
>> + return;
>> +
> Should that be "if *not* phba" like the others below?
Yes, should be ...
if (!phba)
>
>> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
>> "2710 PCI channel disable preparing for reset\n");
>>
>> @@ -9812,7 +9818,8 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
>>
>> /* Disable interrupt and pci device */
>> lpfc_sli_disable_intr(phba);
>> - pci_disable_device(phba->pcidev);
>> + if (phba->probe_done && phba->pcidev)
>> + pci_disable_device(phba->pcidev);
>> }
>>
>> /**
>> @@ -10282,6 +10289,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
>> goto out_disable_intr;
>> }
>>
>> + /* Set probe_done flag */
>> + phba->probe_done = 1;
>> +
>> /* Log the current active interrupt mode */
>> phba->intr_mode = intr_mode;
>> lpfc_log_intr_mode(phba, intr_mode);
>> @@ -10544,6 +10554,9 @@ lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
>> static void
>> lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
>> {
>> + if (!phba)
>> + return;
>> +
>> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
>> "2826 PCI channel disable preparing for reset\n");
>>
>> @@ -10562,7 +10575,9 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
>> /* Disable interrupt and pci device */
>> lpfc_sli4_disable_intr(phba);
>> lpfc_sli4_queue_destroy(phba);
>> - pci_disable_device(phba->pcidev);
>> +
>> + if (phba->probe_done && phba->pcidev)
>> + pci_disable_device(phba->pcidev);
>> }
>>
>> /**
>> @@ -10893,9 +10908,21 @@ static pci_ers_result_t
>> lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
>> {
>> struct Scsi_Host *shost = pci_get_drvdata(pdev);
>> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>> + struct lpfc_hba *phba;
>> pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
>>
>> + if (!shost)
>> + /* Run here means it may during probe state and
>> + * Scsi_Host has not been created and We can do nothing
>> + * in this state so call for hotplug*/
>> + return PCI_ERS_RESULT_NONE;
> Is it possible to get here during device removal, ie
> lpfc_pci_remove_one? If so, we may have shost in hand now, but can
> these routines race? Same for similar instances below...
I think so, it may race here. When error occurs during
lpfc_pci_remove_one().
>
>> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>> +
>> + if (!phba || !phba->probe_done)
>> + /* Run here means it may during probe state */
>> + return PCI_ERS_RESULT_NONE;
>> +
>> switch (phba->pci_dev_grp) {
>> case LPFC_PCI_DEV_LP:
>> rc = lpfc_io_error_detected_s3(pdev, state);
>> @@ -10930,9 +10957,20 @@ static pci_ers_result_t
>> lpfc_io_slot_reset(struct pci_dev *pdev)
>> {
>> struct Scsi_Host *shost = pci_get_drvdata(pdev);
>> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>> + struct lpfc_hba *phba;
>> pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
>>
>> + if (!shost)
>> + /* Run here means it may during probe state and
>> + * Scsi_Host has not been created */
>> + return PCI_ERS_RESULT_NONE;
>> +
>> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>> +
>> + if (!phba || !phba->probe_done)
>> + /* Run here means it may during probe state */
>> + return PCI_ERS_RESULT_NONE;
>> +
>> switch (phba->pci_dev_grp) {
>> case LPFC_PCI_DEV_LP:
>> rc = lpfc_io_slot_reset_s3(pdev);
>> @@ -10963,7 +11001,18 @@ static void
>> lpfc_io_resume(struct pci_dev *pdev)
>> {
>> struct Scsi_Host *shost = pci_get_drvdata(pdev);
>> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>> + struct lpfc_hba *phba;
>> +
>> + if (!shost)
>> + /* Run here means it may during probe state and
>> + * Scsi_Host has not been created */
>> + return;
>> +
>> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
>> +
>> + if (!phba || !phba->probe_done)
>> + /* Run here means it may during probe state */
>> + return;
>>
>> switch (phba->pci_dev_grp) {
>> case LPFC_PCI_DEV_LP:
> Hi Mike and Bjorn,
>
> We don't support Power here at Stratus, but we do a lot of hotplug
> testing, so this change is similar to some of the things we do here to
> harden various device drivers against surprise device removal.
>
> I've been curious about the AER/EEH pci_error_handler callbacks and
> what protections device drivers need to take against double device
> removal. In my experience, not many driver .probe routines take
Yes, not all drivers do it.
Of course if driver can handle some hardware errors, it can call for
reset not hotplug.
> precaution against hotplug (or in this case, EEH) running concurrently
> -- in general they were written with the assumption that device
> resources (data structures at least) will be stable during their
> execution.
This assumption may be not safe, what will it be when faced hardware
errors during probe state.
> The introduction of the pci_error_handler callbacks makes this tougher,
> as apparently they may be invoked even during driver .probe.
Yes, actually, it was not a problem before this patch:
967577b0 PCI/PM: Keep runtime PM enabled for unbound PCI devices
....
+ pci_dev->driver = pci_drv;
+ rc = pci_drv->probe(pci_dev, ddi->id);
......
This patch set pci_dev->driver before .probe, before, set it after probe
success. So it will never be invoked during driver .probe.
>
> In the hotplug area, I've encountered code from various device drivers
> that attempt to handle PCI removal on their own, verifying PCI reads
> against ~0:
>
> 22a8b291 "igb: add register rd/wr for surprise removal"
> 2a1a091c "ixgbe: Check register reads for adapter removal"
> 845a0e40 "mpt2sas: Better handling DEAD IOC (PCI-E LInk down) error condition"
> f3ddac19 "qla2xxx: Disable adapter when we encounter a PCI disconnect"
>
> and in some cases, these routines race PCI device removal. Previous
> Stratus products went as far as introducing a workqueue dedicated to
> single threading and protecting against double and racing PCI removal
> instances.
Maybe we can implement one mechanism that only after probe() and before
removal() can pci_error_handlers works.
>
> I don't mean to hijack Mike's patch review, but I'm curious if Bjorn has
> any input on how AER/EEH, hotplug, and ordinary device removal should
> co-exist and what drivers should do to safely operate in this space.
Totally agree :), but my patch is to solve a real bug(probe with
hardware error).
The race case is a big issue, even though it has not been reported.
Now should wait Bjorn's and others' input.....
Thanks
Mike
>
> Regards,
>
> -- Joe
>
On 07/17/2014 02:32 PM, Mike Qiu wrote:
Hi, all
How about this patch ?
Any idea ?
> In IBM Power servers, when hardware error occurs during probe
> state, EEH subsystem will call driver's error_detected interface,
> which will call pci_disable_device(). But driver's probe function also
> call pci_disable_device() in this situation.
>
> So pci_dev will be disabled twice:
>
> Device lpfc disabling already-disabled device
> ------------[ cut here ]------------
> WARNING: at drivers/pci/pci.c:1407
> CPU: 0 PID: 8744 Comm: kworker/0:0 Tainted: G W 3.10.42-2002.pkvm2_1_1.6.ppc64 #1
> Workqueue: events .work_for_cpu_fn
> task: c00000274e3f5400 ti: c0000027d3958000 task.ti: c0000027d3958000
> NIP: c000000000471b8c LR: c000000000471b88 CTR: c00000000043ebe0
> REGS: c0000027d395b650 TRAP: 0700 Tainted: G W (3.10.42-2002.pkvm2_1_1.6.ppc64)
> MSR: 9000000100029032 <SF,HV,EE,ME,IR,DR,RI> CR: 28b52b44 XER: 20000000
> CFAR: c000000000879ab8 SOFTE: 1
> ...
> NIP .pci_disable_device+0xcc/0xe0
> LR .pci_disable_device+0xc8/0xe0
> Call Trace:
> .pci_disable_device+0xc8/0xe0 (unreliable)
> .lpfc_disable_pci_dev+0x50/0x80 [lpfc]
> .lpfc_pci_probe_one+0x870/0x21a0 [lpfc]
> .local_pci_probe+0x68/0xb0
> .work_for_cpu_fn+0x38/0x60
> .process_one_work+0x1a4/0x4d0
> .worker_thread+0x37c/0x490
> .kthread+0xf0/0x100
> .ret_from_kernel_thread+0x5c/0x80
>
> Signed-off-by: Mike Qiu <[email protected]>
> ---
> drivers/scsi/lpfc/lpfc.h | 1 +
> drivers/scsi/lpfc/lpfc_init.c | 59 +++++++++++++++++++++++++++++++++++++++----
> 2 files changed, 55 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
> index 434e903..0c7bad9 100644
> --- a/drivers/scsi/lpfc/lpfc.h
> +++ b/drivers/scsi/lpfc/lpfc.h
> @@ -813,6 +813,7 @@ struct lpfc_hba {
> #define VPD_MASK 0xf /* mask for any vpd data */
>
> uint8_t soft_wwn_enable;
> + uint8_t probe_done;
>
> struct timer_list fcp_poll_timer;
> struct timer_list eratt_poll;
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index 06f9a5b..c2e67ae 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -9519,6 +9519,9 @@ lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
> }
> }
>
> + /* Set the probe flag */
> + phba->probe_done = 1;
> +
> /* Perform post initialization setup */
> lpfc_post_init_setup(phba);
>
> @@ -9795,6 +9798,9 @@ lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
> static void
> lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
> {
> + if (phba)
> + return;
> +
> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> "2710 PCI channel disable preparing for reset\n");
>
> @@ -9812,7 +9818,8 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
>
> /* Disable interrupt and pci device */
> lpfc_sli_disable_intr(phba);
> - pci_disable_device(phba->pcidev);
> + if (phba->probe_done && phba->pcidev)
> + pci_disable_device(phba->pcidev);
> }
>
> /**
> @@ -10282,6 +10289,9 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
> goto out_disable_intr;
> }
>
> + /* Set probe_done flag */
> + phba->probe_done = 1;
> +
> /* Log the current active interrupt mode */
> phba->intr_mode = intr_mode;
> lpfc_log_intr_mode(phba, intr_mode);
> @@ -10544,6 +10554,9 @@ lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
> static void
> lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
> {
> + if (!phba)
> + return;
> +
> lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
> "2826 PCI channel disable preparing for reset\n");
>
> @@ -10562,7 +10575,9 @@ lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
> /* Disable interrupt and pci device */
> lpfc_sli4_disable_intr(phba);
> lpfc_sli4_queue_destroy(phba);
> - pci_disable_device(phba->pcidev);
> +
> + if (phba->probe_done && phba->pcidev)
> + pci_disable_device(phba->pcidev);
> }
>
> /**
> @@ -10893,9 +10908,21 @@ static pci_ers_result_t
> lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
> {
> struct Scsi_Host *shost = pci_get_drvdata(pdev);
> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> + struct lpfc_hba *phba;
> pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
>
> + if (!shost)
> + /* Run here means it may during probe state and
> + * Scsi_Host has not been created and We can do nothing
> + * in this state so call for hotplug*/
> + return PCI_ERS_RESULT_NONE;
> +
> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> +
> + if (!phba || !phba->probe_done)
> + /* Run here means it may during probe state */
> + return PCI_ERS_RESULT_NONE;
> +
> switch (phba->pci_dev_grp) {
> case LPFC_PCI_DEV_LP:
> rc = lpfc_io_error_detected_s3(pdev, state);
> @@ -10930,9 +10957,20 @@ static pci_ers_result_t
> lpfc_io_slot_reset(struct pci_dev *pdev)
> {
> struct Scsi_Host *shost = pci_get_drvdata(pdev);
> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> + struct lpfc_hba *phba;
> pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
>
> + if (!shost)
> + /* Run here means it may during probe state and
> + * Scsi_Host has not been created */
> + return PCI_ERS_RESULT_NONE;
> +
> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> +
> + if (!phba || !phba->probe_done)
> + /* Run here means it may during probe state */
> + return PCI_ERS_RESULT_NONE;
> +
> switch (phba->pci_dev_grp) {
> case LPFC_PCI_DEV_LP:
> rc = lpfc_io_slot_reset_s3(pdev);
> @@ -10963,7 +11001,18 @@ static void
> lpfc_io_resume(struct pci_dev *pdev)
> {
> struct Scsi_Host *shost = pci_get_drvdata(pdev);
> - struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> + struct lpfc_hba *phba;
> +
> + if (!shost)
> + /* Run here means it may during probe state and
> + * Scsi_Host has not been created */
> + return;
> +
> + phba = ((struct lpfc_vport *)shost->hostdata)->phba;
> +
> + if (!phba || !phba->probe_done)
> + /* Run here means it may during probe state */
> + return;
>
> switch (phba->pci_dev_grp) {
> case LPFC_PCI_DEV_LP: