Remove attach_method because i2c-powermac is
in charge to instantiate the driver directly.
Signed-off-by: Goffredo Baroncelli <[email protected]>
---
drivers/macintosh/therm_windtunnel.c | 35 -----------------------------------
1 file changed, 35 deletions(-)
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index a64a06f..1e50455 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -300,40 +300,6 @@ static int control_loop(void *dummy)
/* i2c probing and setup */
/************************************************************************/
-static int
-do_attach( struct i2c_adapter *adapter )
-{
- /* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
- static const unsigned short scan_ds1775[] = {
- 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
- I2C_CLIENT_END
- };
- static const unsigned short scan_adm1030[] = {
- 0x2c, 0x2d, 0x2e, 0x2f,
- I2C_CLIENT_END
- };
-
- if( strncmp(adapter->name, "uni-n", 5) )
- return 0;
-
- if( !x.running ) {
- struct i2c_board_info info;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE);
- i2c_new_probed_device(adapter, &info, scan_ds1775, NULL);
-
- strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE);
- i2c_new_probed_device(adapter, &info, scan_adm1030, NULL);
-
- if( x.thermostat && x.fan ) {
- x.running = 1;
- x.poll_task = kthread_run(control_loop, NULL, "g4fand");
- }
- }
- return 0;
-}
-
static void
try_start_control_loop(void)
{
@@ -450,7 +416,6 @@ static struct i2c_driver g4fan_driver = {
.driver = {
.name = "therm_windtunnel",
},
- .attach_adapter = do_attach,
.probe = do_probe,
.remove = do_remove,
.id_table = therm_windtunnel_id,
--
2.1.0.rc1