The srcu read lock must be held while accessing memslots (e.g.
when using gfn_to_* functions), however, commit c24ae0dcd3e8
("kvm: x86: Unpin and remove kvm_arch->apic_access_page") call
gfn_to_page() in kvm_vcpu_reload_apic_access_page() w/o hold it in
vmx_vcpu_reset() path which leads to suspicious rcu_dereference_check()
usage warning. This patch fix it by holding srcu read lock in all
kvm_vcpu_reset() call path.
[ INFO: suspicious RCU usage. ]
3.18.0-rc2-test2+ #70 Not tainted
-------------------------------
include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-x86/2371:
#0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]
stack backtrace:
CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
Call Trace:
[<ffffffff816f514f>] dump_stack+0x4e/0x71
[<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
[<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
[<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
[<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
[<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
[<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
[<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
[<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
[<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
[<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
[<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
[<ffffffff8122ee45>] ? __fget+0x5/0x250
[<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
[<ffffffff81223491>] SyS_ioctl+0x81/0xa0
[<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
Reported-by: Takashi Iwai <[email protected]>
Reported-by: Alexei Starovoitov <[email protected]>
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Wanpeng Li <[email protected]>
---
v3 -> v4:
* bypass the problem altoghter by kvm_make_request
v2 -> v3:
* take care all vmx_vcpu_reset call path
v1 -> v2:
* just fix hold the srcu read lock in vmx_vcpu_reset path
arch/x86/kvm/vmx.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index a0f78db..3e556c6 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4579,7 +4579,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
vmcs_write32(TPR_THRESHOLD, 0);
}
- kvm_vcpu_reload_apic_access_page(vcpu);
+ kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
if (vmx_vm_has_apicv(vcpu->kvm))
memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
--
1.7.1
Hi Wanpeng,
I think I have totally missed this thread.
I opened lockdep and RCU debug, and tried on 3.18-rc1. But I didn't get
the warning.
My steps are:
1. Use numactl to bind a qemu process to node1.
2. Offline all node1 memory. And the qemu process is still running.
Would you please tell me how did you reproduce it ?
Thanks.
On 11/02/2014 03:07 PM, Wanpeng Li wrote:
> The srcu read lock must be held while accessing memslots (e.g.
> when using gfn_to_* functions), however, commit c24ae0dcd3e8
> ("kvm: x86: Unpin and remove kvm_arch->apic_access_page") call
> gfn_to_page() in kvm_vcpu_reload_apic_access_page() w/o hold it in
> vmx_vcpu_reset() path which leads to suspicious rcu_dereference_check()
> usage warning. This patch fix it by holding srcu read lock in all
> kvm_vcpu_reset() call path.
>
>
> [ INFO: suspicious RCU usage. ]
> 3.18.0-rc2-test2+ #70 Not tainted
> -------------------------------
> include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
> rcu_scheduler_active = 1, debug_locks = 0
> 1 lock held by qemu-system-x86/2371:
> #0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]
>
> stack backtrace:
> CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
> Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
> 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
> ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
> ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
> Call Trace:
> [<ffffffff816f514f>] dump_stack+0x4e/0x71
> [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
> [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
> [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
> [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
> [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
> [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
> [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
> [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
> [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
> [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
> [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
> [<ffffffff8122ee45>] ? __fget+0x5/0x250
> [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
> [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
> [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
>
> Reported-by: Takashi Iwai <[email protected]>
> Reported-by: Alexei Starovoitov <[email protected]>
> Suggested-by: Paolo Bonzini <[email protected]>
> Signed-off-by: Wanpeng Li <[email protected]>
> ---
> v3 -> v4:
> * bypass the problem altoghter by kvm_make_request
> v2 -> v3:
> * take care all vmx_vcpu_reset call path
> v1 -> v2:
> * just fix hold the srcu read lock in vmx_vcpu_reset path
>
> arch/x86/kvm/vmx.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index a0f78db..3e556c6 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -4579,7 +4579,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
> vmcs_write32(TPR_THRESHOLD, 0);
> }
>
> - kvm_vcpu_reload_apic_access_page(vcpu);
> + kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
>
> if (vmx_vm_has_apicv(vcpu->kvm))
> memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
Hi Tang,
On Tue, Nov 11, 2014 at 01:35:29PM +0800, Tang Chen wrote:
>Hi Wanpeng,
>
Sorry for the late.
>I think I have totally missed this thread.
>I opened lockdep and RCU debug, and tried on 3.18-rc1. But I didn't
>get the warning.
I also opened lockdep and RCU debug, and tried 3.18.0-rc2 on a Ivy
bridge, the warning will be triggered after run qemu immediately. There
is no need to try any hotplug related stuff.
In addition, Paolo's patch is merged upstream to fix this.
commit a73896cb5bbdce672945745db8224352a689f580
Author: Paolo Bonzini <[email protected]>
Date: Sun Nov 2 07:54:30 2014 +0100
KVM: vmx: defer load of APIC access page address during reset
Regards,
Wanpeng Li
>My steps are:
>
>1. Use numactl to bind a qemu process to node1.
>2. Offline all node1 memory. And the qemu process is still running.
>
>Would you please tell me how did you reproduce it ?
>
>Thanks.
>
>On 11/02/2014 03:07 PM, Wanpeng Li wrote:
>>The srcu read lock must be held while accessing memslots (e.g.
>>when using gfn_to_* functions), however, commit c24ae0dcd3e8
>>("kvm: x86: Unpin and remove kvm_arch->apic_access_page") call
>>gfn_to_page() in kvm_vcpu_reload_apic_access_page() w/o hold it in
>>vmx_vcpu_reset() path which leads to suspicious rcu_dereference_check()
>>usage warning. This patch fix it by holding srcu read lock in all
>>kvm_vcpu_reset() call path.
>>
>>
>>[ INFO: suspicious RCU usage. ]
>>3.18.0-rc2-test2+ #70 Not tainted
>>-------------------------------
>>include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!
>>
>>other info that might help us debug this:
>>
>>rcu_scheduler_active = 1, debug_locks = 0
>>1 lock held by qemu-system-x86/2371:
>> #0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]
>>
>>stack backtrace:
>>CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
>>Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
>> 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
>> ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
>> ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
>>Call Trace:
>> [<ffffffff816f514f>] dump_stack+0x4e/0x71
>> [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
>> [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
>> [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
>> [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
>> [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
>> [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
>> [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
>> [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
>> [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
>> [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
>> [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
>> [<ffffffff8122ee45>] ? __fget+0x5/0x250
>> [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
>> [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
>> [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
>>
>>Reported-by: Takashi Iwai <[email protected]>
>>Reported-by: Alexei Starovoitov <[email protected]>
>>Suggested-by: Paolo Bonzini <[email protected]>
>>Signed-off-by: Wanpeng Li <[email protected]>
>>---
>>v3 -> v4:
>> * bypass the problem altoghter by kvm_make_request
>>v2 -> v3:
>> * take care all vmx_vcpu_reset call path
>>v1 -> v2:
>> * just fix hold the srcu read lock in vmx_vcpu_reset path
>>
>> arch/x86/kvm/vmx.c | 2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>>diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>index a0f78db..3e556c6 100644
>>--- a/arch/x86/kvm/vmx.c
>>+++ b/arch/x86/kvm/vmx.c
>>@@ -4579,7 +4579,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
>> vmcs_write32(TPR_THRESHOLD, 0);
>> }
>>- kvm_vcpu_reload_apic_access_page(vcpu);
>>+ kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
>> if (vmx_vm_has_apicv(vcpu->kvm))
>> memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
Thanks for the sharing. Will do more tests. :)
On 11/14/2014 07:39 AM, Wanpeng Li wrote:
> Hi Tang,
> On Tue, Nov 11, 2014 at 01:35:29PM +0800, Tang Chen wrote:
>> Hi Wanpeng,
>>
> Sorry for the late.
>
>> I think I have totally missed this thread.
>> I opened lockdep and RCU debug, and tried on 3.18-rc1. But I didn't
>> get the warning.
> I also opened lockdep and RCU debug, and tried 3.18.0-rc2 on a Ivy
> bridge, the warning will be triggered after run qemu immediately. There
> is no need to try any hotplug related stuff.
>
> In addition, Paolo's patch is merged upstream to fix this.
>
> commit a73896cb5bbdce672945745db8224352a689f580
> Author: Paolo Bonzini <[email protected]>
> Date: Sun Nov 2 07:54:30 2014 +0100
>
> KVM: vmx: defer load of APIC access page address during reset
>
> Regards,
> Wanpeng Li
>
>> My steps are:
>>
>> 1. Use numactl to bind a qemu process to node1.
>> 2. Offline all node1 memory. And the qemu process is still running.
>>
>> Would you please tell me how did you reproduce it ?
>>
>> Thanks.
>>
>> On 11/02/2014 03:07 PM, Wanpeng Li wrote:
>>> The srcu read lock must be held while accessing memslots (e.g.
>>> when using gfn_to_* functions), however, commit c24ae0dcd3e8
>>> ("kvm: x86: Unpin and remove kvm_arch->apic_access_page") call
>>> gfn_to_page() in kvm_vcpu_reload_apic_access_page() w/o hold it in
>>> vmx_vcpu_reset() path which leads to suspicious rcu_dereference_check()
>>> usage warning. This patch fix it by holding srcu read lock in all
>>> kvm_vcpu_reset() call path.
>>>
>>>
>>> [ INFO: suspicious RCU usage. ]
>>> 3.18.0-rc2-test2+ #70 Not tainted
>>> -------------------------------
>>> include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!
>>>
>>> other info that might help us debug this:
>>>
>>> rcu_scheduler_active = 1, debug_locks = 0
>>> 1 lock held by qemu-system-x86/2371:
>>> #0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]
>>>
>>> stack backtrace:
>>> CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
>>> Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
>>> 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
>>> ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
>>> ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
>>> Call Trace:
>>> [<ffffffff816f514f>] dump_stack+0x4e/0x71
>>> [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
>>> [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
>>> [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
>>> [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
>>> [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
>>> [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
>>> [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
>>> [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
>>> [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
>>> [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
>>> [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
>>> [<ffffffff8122ee45>] ? __fget+0x5/0x250
>>> [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
>>> [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
>>> [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
>>>
>>> Reported-by: Takashi Iwai <[email protected]>
>>> Reported-by: Alexei Starovoitov <[email protected]>
>>> Suggested-by: Paolo Bonzini <[email protected]>
>>> Signed-off-by: Wanpeng Li <[email protected]>
>>> ---
>>> v3 -> v4:
>>> * bypass the problem altoghter by kvm_make_request
>>> v2 -> v3:
>>> * take care all vmx_vcpu_reset call path
>>> v1 -> v2:
>>> * just fix hold the srcu read lock in vmx_vcpu_reset path
>>>
>>> arch/x86/kvm/vmx.c | 2 +-
>>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>> index a0f78db..3e556c6 100644
>>> --- a/arch/x86/kvm/vmx.c
>>> +++ b/arch/x86/kvm/vmx.c
>>> @@ -4579,7 +4579,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
>>> vmcs_write32(TPR_THRESHOLD, 0);
>>> }
>>> - kvm_vcpu_reload_apic_access_page(vcpu);
>>> + kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
>>> if (vmx_vm_has_apicv(vcpu->kvm))
>>> memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
> .
>
Hi Tang,
On Fri, Nov 21, 2014 at 02:41:57PM +0800, Tang Chen wrote:
>Hi Wanpeng,
>
>Sorry, it is about this problem again.
>
>I booted 3.18.0-rc2, without Paolo's patch. lockdep and RCU debug
>were all opened.
>
>Then I started a qemu vm with the following options:
>
>/usr/libexec/qemu-kvm -hda rhel7.0ga-x64.qcow2 -m 512M -cpu
>host,-x2apic -serial stdio
>
>I added printk() in kvm_vcpu_reload_apic_access_page(), and it was
>printed out.
>So I think I can confirm that I have run into
>kvm_vcpu_reload_apic_access_page().
>
>But I still didn't see any warning.
>
>Is there anything else I should do ?
>Would you please share your qemu command with me ?
I test it on the other guy's Ivytown and take advantage of the qemu command
line which he used, so I forget the accurate command line which used that day.
Paolo also reproduce the bug, Paolo, ping.
Regards,
Wanpeng Li
>
>Thanks. :)
>
>On 11/14/2014 07:39 AM, Wanpeng Li wrote:
>>Hi Tang,
>>On Tue, Nov 11, 2014 at 01:35:29PM +0800, Tang Chen wrote:
>>>Hi Wanpeng,
>>>
>>Sorry for the late.
>>
>>>I think I have totally missed this thread.
>>>I opened lockdep and RCU debug, and tried on 3.18-rc1. But I didn't
>>>get the warning.
>>I also opened lockdep and RCU debug, and tried 3.18.0-rc2 on a Ivy
>>bridge, the warning will be triggered after run qemu immediately. There
>>is no need to try any hotplug related stuff.
>>
>>In addition, Paolo's patch is merged upstream to fix this.
>>
>>commit a73896cb5bbdce672945745db8224352a689f580
>>Author: Paolo Bonzini <[email protected]>
>>Date: Sun Nov 2 07:54:30 2014 +0100
>>
>>KVM: vmx: defer load of APIC access page address during reset
>>
>>Regards,
>>Wanpeng Li
>>
>>>My steps are:
>>>
>>>1. Use numactl to bind a qemu process to node1.
>>>2. Offline all node1 memory. And the qemu process is still running.
>>>
>>>Would you please tell me how did you reproduce it ?
>>>
>>>Thanks.
>>>
>>>On 11/02/2014 03:07 PM, Wanpeng Li wrote:
>>>>The srcu read lock must be held while accessing memslots (e.g.
>>>>when using gfn_to_* functions), however, commit c24ae0dcd3e8
>>>>("kvm: x86: Unpin and remove kvm_arch->apic_access_page") call
>>>>gfn_to_page() in kvm_vcpu_reload_apic_access_page() w/o hold it in
>>>>vmx_vcpu_reset() path which leads to suspicious rcu_dereference_check()
>>>>usage warning. This patch fix it by holding srcu read lock in all
>>>>kvm_vcpu_reset() call path.
>>>>
>>>>
>>>>[ INFO: suspicious RCU usage. ]
>>>>3.18.0-rc2-test2+ #70 Not tainted
>>>>-------------------------------
>>>>include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!
>>>>
>>>>other info that might help us debug this:
>>>>
>>>>rcu_scheduler_active = 1, debug_locks = 0
>>>>1 lock held by qemu-system-x86/2371:
>>>> #0: (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]
>>>>
>>>>stack backtrace:
>>>>CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
>>>>Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
>>>> 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
>>>> ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
>>>> ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
>>>>Call Trace:
>>>> [<ffffffff816f514f>] dump_stack+0x4e/0x71
>>>> [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
>>>> [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
>>>> [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
>>>> [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
>>>> [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
>>>> [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
>>>> [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
>>>> [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
>>>> [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
>>>> [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
>>>> [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
>>>> [<ffffffff8122ee45>] ? __fget+0x5/0x250
>>>> [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
>>>> [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
>>>> [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
>>>>
>>>>Reported-by: Takashi Iwai <[email protected]>
>>>>Reported-by: Alexei Starovoitov <[email protected]>
>>>>Suggested-by: Paolo Bonzini <[email protected]>
>>>>Signed-off-by: Wanpeng Li <[email protected]>
>>>>---
>>>>v3 -> v4:
>>>> * bypass the problem altoghter by kvm_make_request
>>>>v2 -> v3:
>>>> * take care all vmx_vcpu_reset call path
>>>>v1 -> v2:
>>>> * just fix hold the srcu read lock in vmx_vcpu_reset path
>>>>
>>>> arch/x86/kvm/vmx.c | 2 +-
>>>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>>>
>>>>diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>>>index a0f78db..3e556c6 100644
>>>>--- a/arch/x86/kvm/vmx.c
>>>>+++ b/arch/x86/kvm/vmx.c
>>>>@@ -4579,7 +4579,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu)
>>>> vmcs_write32(TPR_THRESHOLD, 0);
>>>> }
>>>>- kvm_vcpu_reload_apic_access_page(vcpu);
>>>>+ kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
>>>> if (vmx_vm_has_apicv(vcpu->kvm))
>>>> memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
>>.
>>
On 21/11/2014 07:30, Wanpeng Li wrote:
> I test it on the other guy's Ivytown and take advantage of the qemu command
> line which he used, so I forget the accurate command line which used that day.
>
> Paolo also reproduce the bug, Paolo, ping.
It also reproduced always for me with a debug kernel from Fedora.
Paolo