Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.6/drivers/scsi/Kconfig.old 2004-05-17 20:51:21.395075352 -0500
+++ linux-2.6.6/drivers/scsi/Kconfig 2004-05-17 20:55:52.074925760 -0500
@@ -315,6 +315,13 @@
config SCSI_AACRAID
tristate "Adaptec AACRAID support"
depends on SCSI && PCI
+ help
+ This driver supports the Dell PERC2, 2/Si, 3/Si, 3/Di,
+ HP NetRAID-4M SCSI and the Adaptec Advanced Raid Products
+ <http://www.adaptec.com/products/solutions/raid.html>
+
+ To compile this driver as a module, choose M here: the module
+ will be called aacraid.
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
It's a good start! I approve. The time stamp and kernel version must
have come out of a rift though ;->
The web page covers a broad line of our products, many of which are
*not* aacraid based. No big deal, but I must admit Adaptec has not
placed a clear delineation. All late model RAID cards from Adaptec are
based on the aacraid interface.
Dell CERC, IBM ServeRAID 7t, 8i & 8k and ICP 9014, 9024, 9047, 9087,
5085, 9085 & 9067 SATA and SAS cards are missing.
Signed-off-by: Mark Salyzyn <[email protected]>
--- linux-2.6.6/drivers/scsi/Kconfig 2004-05-17
20:55:52.074925760 -0500
+++ linux-2.6.6/drivers/scsi/Kconfig.new 2005-10-4 08:28:09
@@ -318,6 +318,7 @@
help
This driver supports the Dell PERC2, 2/Si, 3/Si, 3/Di,
- HP NetRAID-4M SCSI and the Adaptec Advanced Raid Products
+ CERC, HP NetRAID-4M SCSI, Adaptec Advanced Raid Products
<http://www.adaptec.com/products/solutions/raid.html>
+ late model IBM ServeRAID and ICP SATA & SAS products.
To compile this driver as a module, choose M here: the module
Sincerely -- Mark Salyzyn
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Adrian Bunk
Sent: Thursday, November 03, 2005 8:01 PM
To: [email protected]
Cc: [email protected]
Subject: [2.6 patch] SCSI_AACRAID: add a help text
Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.6/drivers/scsi/Kconfig.old 2004-05-17
20:51:21.395075352 -0500
+++ linux-2.6.6/drivers/scsi/Kconfig 2004-05-17 20:55:52.074925760
-0500
@@ -315,6 +315,13 @@
config SCSI_AACRAID
tristate "Adaptec AACRAID support"
depends on SCSI && PCI
+ help
+ This driver supports the Dell PERC2, 2/Si, 3/Si, 3/Di,
+ HP NetRAID-4M SCSI and the Adaptec Advanced Raid Products
+ <http://www.adaptec.com/products/solutions/raid.html>
+
+ To compile this driver as a module, choose M here: the module
+ will be called aacraid.
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
On Fri, Nov 04, 2005 at 08:35:29AM -0500, Salyzyn, Mark wrote:
> It's a good start! I approve. The time stamp and kernel version must
> have come out of a rift though ;->
No, it's an old patch hand-edited to apply against a current kernel...
> The web page covers a broad line of our products, many of which are
> *not* aacraid based. No big deal, but I must admit Adaptec has not
> placed a clear delineation. All late model RAID cards from Adaptec are
> based on the aacraid interface.
>
> Dell CERC, IBM ServeRAID 7t, 8i & 8k and ICP 9014, 9024, 9047, 9087,
> 5085, 9085 & 9067 SATA and SAS cards are missing.
>...
Thanks for improving the text.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed