From: Daeho Jeong <[email protected]>
fadvise() allows the user to expand the readahead window to double with
POSIX_FADV_SEQUENTIAL, now. But, in some use cases, it is not that
sufficient and we need to meet the need in a restricted way. We can
control the multiplier value of bdi device readahead between 2 (default)
and 256 for POSIX_FADV_SEQUENTIAL advise option.
Signed-off-by: Daeho Jeong <[email protected]>
---
Documentation/ABI/testing/sysfs-fs-f2fs | 6 +++++
fs/f2fs/f2fs.h | 2 ++
fs/f2fs/file.c | 32 +++++++++++++++++++++++++
fs/f2fs/super.c | 1 +
fs/f2fs/sysfs.c | 10 ++++++++
5 files changed, 51 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index 3d1f853c6681..60f1f176374e 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -507,3 +507,9 @@ Date: July 2021
Contact: "Daeho Jeong" <[email protected]>
Description: You can control for which gc mode the "gc_reclaimed_segments" node shows.
Refer to the description of the modes in "gc_reclaimed_segments".
+
+What: /sys/fs/f2fs/<disk>/seq_file_ra_mul
+Date: July 2021
+Contact: "Daeho Jeong" <[email protected]>
+Description: You can control the multiplier value of bdi device readahead window size
+ between 2 (default) and 256 for POSIX_FADV_SEQUENTIAL advise option.
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 502e47936651..c59329dcb1f6 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1733,6 +1733,8 @@ struct f2fs_sb_info {
unsigned int gc_segment_mode; /* GC state for reclaimed segments */
unsigned int gc_reclaimed_segs[MAX_GC_MODE]; /* Reclaimed segs for each mode */
+ unsigned long seq_file_ra_mul; /* multiplier for ra_pages of seq. files in fadvise */
+
#ifdef CONFIG_F2FS_FS_COMPRESSION
struct kmem_cache *page_array_slab; /* page array entry */
unsigned int page_array_slab_size; /* default page array slab size */
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6afd4562335f..f71c90236815 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -23,6 +23,7 @@
#include <linux/nls.h>
#include <linux/sched/signal.h>
#include <linux/fileattr.h>
+#include <linux/fadvise.h>
#include "f2fs.h"
#include "node.h"
@@ -4332,6 +4333,36 @@ static ssize_t f2fs_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
return ret;
}
+static int f2fs_file_fadvise(struct file *filp, loff_t offset, loff_t len,
+ int advice)
+{
+ int ret;
+ struct inode *inode;
+ struct address_space *mapping;
+ struct backing_dev_info *bdi;
+
+ if (advice == POSIX_FADV_SEQUENTIAL) {
+ inode = file_inode(filp);
+ if (S_ISFIFO(inode->i_mode))
+ return -ESPIPE;
+
+ mapping = filp->f_mapping;
+ if (!mapping || len < 0)
+ return -EINVAL;
+
+ bdi = inode_to_bdi(mapping->host);
+ filp->f_ra.ra_pages = bdi->ra_pages * F2FS_I_SB(inode)->seq_file_ra_mul;
+ spin_lock(&filp->f_lock);
+ filp->f_mode &= ~FMODE_RANDOM;
+ spin_unlock(&filp->f_lock);
+ return 0;
+ }
+
+ ret = generic_fadvise(filp, offset, len, advice);
+
+ return ret;
+}
+
#ifdef CONFIG_COMPAT
struct compat_f2fs_gc_range {
u32 sync;
@@ -4460,4 +4491,5 @@ const struct file_operations f2fs_file_operations = {
#endif
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
+ .fadvise = f2fs_file_fadvise,
};
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 9089303f7f8c..ccb745807fe1 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -3312,6 +3312,7 @@ static void init_sb_info(struct f2fs_sb_info *sbi)
sbi->next_victim_seg[FG_GC] = NULL_SEGNO;
sbi->max_victim_search = DEF_MAX_VICTIM_SEARCH;
sbi->migration_granularity = sbi->segs_per_sec;
+ sbi->seq_file_ra_mul = 2;
sbi->dir_level = DEF_DIR_LEVEL;
sbi->interval_time[CP_TIME] = DEF_CP_INTERVAL;
diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
index 15fe30d3aeb5..9a21be63436d 100644
--- a/fs/f2fs/sysfs.c
+++ b/fs/f2fs/sysfs.c
@@ -538,6 +538,14 @@ static ssize_t __sbi_store(struct f2fs_attr *a,
return count;
}
+ if (!strcmp(a->attr.name, "seq_file_ra_mul")) {
+ if (t >= 2 && t <= 256)
+ sbi->seq_file_ra_mul = t;
+ else
+ return -EINVAL;
+ return count;
+ }
+
*ui = (unsigned int)t;
return count;
@@ -763,6 +771,7 @@ F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_candidate_count, max_candidate_cou
F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_age_weight, age_weight);
F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_age_threshold, age_threshold);
+F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, seq_file_ra_mul, seq_file_ra_mul);
F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_segment_mode, gc_segment_mode);
F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_reclaimed_segments, gc_reclaimed_segs);
@@ -838,6 +847,7 @@ static struct attribute *f2fs_attrs[] = {
ATTR_LIST(atgc_candidate_count),
ATTR_LIST(atgc_age_weight),
ATTR_LIST(atgc_age_threshold),
+ ATTR_LIST(seq_file_ra_mul),
ATTR_LIST(gc_segment_mode),
ATTR_LIST(gc_reclaimed_segments),
NULL,
--
2.32.0.432.gabb21c7263-goog
On 2021/7/23 7:13, Daeho Jeong wrote:
> From: Daeho Jeong <[email protected]>
>
> fadvise() allows the user to expand the readahead window to double with
> POSIX_FADV_SEQUENTIAL, now. But, in some use cases, it is not that
> sufficient and we need to meet the need in a restricted way. We can
> control the multiplier value of bdi device readahead between 2 (default)
> and 256 for POSIX_FADV_SEQUENTIAL advise option.
Minor things as below comments....
>
> Signed-off-by: Daeho Jeong <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-fs-f2fs | 6 +++++
> fs/f2fs/f2fs.h | 2 ++
> fs/f2fs/file.c | 32 +++++++++++++++++++++++++
> fs/f2fs/super.c | 1 +
> fs/f2fs/sysfs.c | 10 ++++++++
> 5 files changed, 51 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
> index 3d1f853c6681..60f1f176374e 100644
> --- a/Documentation/ABI/testing/sysfs-fs-f2fs
> +++ b/Documentation/ABI/testing/sysfs-fs-f2fs
> @@ -507,3 +507,9 @@ Date: July 2021
> Contact: "Daeho Jeong" <[email protected]>
> Description: You can control for which gc mode the "gc_reclaimed_segments" node shows.
> Refer to the description of the modes in "gc_reclaimed_segments".
> +
> +What: /sys/fs/f2fs/<disk>/seq_file_ra_mul
> +Date: July 2021
> +Contact: "Daeho Jeong" <[email protected]>
> +Description: You can control the multiplier value of bdi device readahead window size
> + between 2 (default) and 256 for POSIX_FADV_SEQUENTIAL advise option.
> diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
> index 502e47936651..c59329dcb1f6 100644
> --- a/fs/f2fs/f2fs.h
> +++ b/fs/f2fs/f2fs.h
> @@ -1733,6 +1733,8 @@ struct f2fs_sb_info {
> unsigned int gc_segment_mode; /* GC state for reclaimed segments */
> unsigned int gc_reclaimed_segs[MAX_GC_MODE]; /* Reclaimed segs for each mode */
>
> + unsigned long seq_file_ra_mul; /* multiplier for ra_pages of seq. files in fadvise */
> +
> #ifdef CONFIG_F2FS_FS_COMPRESSION
> struct kmem_cache *page_array_slab; /* page array entry */
> unsigned int page_array_slab_size; /* default page array slab size */
> diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
> index 6afd4562335f..f71c90236815 100644
> --- a/fs/f2fs/file.c
> +++ b/fs/f2fs/file.c
> @@ -23,6 +23,7 @@
> #include <linux/nls.h>
> #include <linux/sched/signal.h>
> #include <linux/fileattr.h>
> +#include <linux/fadvise.h>
>
> #include "f2fs.h"
> #include "node.h"
> @@ -4332,6 +4333,36 @@ static ssize_t f2fs_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
> return ret;
> }
>
> +static int f2fs_file_fadvise(struct file *filp, loff_t offset, loff_t len,
> + int advice)
> +{
> + int ret;
> + struct inode *inode;
> + struct address_space *mapping;
> + struct backing_dev_info *bdi;
> +
> + if (advice == POSIX_FADV_SEQUENTIAL) {
> + inode = file_inode(filp);
> + if (S_ISFIFO(inode->i_mode))
> + return -ESPIPE;
> +
> + mapping = filp->f_mapping;
> + if (!mapping || len < 0)
> + return -EINVAL;
> +
> + bdi = inode_to_bdi(mapping->host);
> + filp->f_ra.ra_pages = bdi->ra_pages * F2FS_I_SB(inode)->seq_file_ra_mul;
Exceed 80 columns...
> + spin_lock(&filp->f_lock);
> + filp->f_mode &= ~FMODE_RANDOM;
> + spin_unlock(&filp->f_lock);
> + return 0;
> + }
> +
> + ret = generic_fadvise(filp, offset, len, advice);
> +
> + return ret;
return generic_fadvise(filp, offset, len, advice); ?
Then we can remove @ret definition.
> +}
> +
> #ifdef CONFIG_COMPAT
> struct compat_f2fs_gc_range {
> u32 sync;
> @@ -4460,4 +4491,5 @@ const struct file_operations f2fs_file_operations = {
> #endif
> .splice_read = generic_file_splice_read,
> .splice_write = iter_file_splice_write,
> + .fadvise = f2fs_file_fadvise,
> };
> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
> index 9089303f7f8c..ccb745807fe1 100644
> --- a/fs/f2fs/super.c
> +++ b/fs/f2fs/super.c
> @@ -3312,6 +3312,7 @@ static void init_sb_info(struct f2fs_sb_info *sbi)
> sbi->next_victim_seg[FG_GC] = NULL_SEGNO;
> sbi->max_victim_search = DEF_MAX_VICTIM_SEARCH;
> sbi->migration_granularity = sbi->segs_per_sec;
> + sbi->seq_file_ra_mul = 2;
>
> sbi->dir_level = DEF_DIR_LEVEL;
> sbi->interval_time[CP_TIME] = DEF_CP_INTERVAL;
> diff --git a/fs/f2fs/sysfs.c b/fs/f2fs/sysfs.c
> index 15fe30d3aeb5..9a21be63436d 100644
> --- a/fs/f2fs/sysfs.c
> +++ b/fs/f2fs/sysfs.c
> @@ -538,6 +538,14 @@ static ssize_t __sbi_store(struct f2fs_attr *a,
> return count;
> }
>
> + if (!strcmp(a->attr.name, "seq_file_ra_mul")) {
> + if (t >= 2 && t <= 256)
Would it be better to use macro to instead number?
Thanks,
> + sbi->seq_file_ra_mul = t;
> + else
> + return -EINVAL;
> + return count;
> + }
> +
> *ui = (unsigned int)t;
>
> return count;
> @@ -763,6 +771,7 @@ F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_candidate_count, max_candidate_cou
> F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_age_weight, age_weight);
> F2FS_RW_ATTR(ATGC_INFO, atgc_management, atgc_age_threshold, age_threshold);
>
> +F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, seq_file_ra_mul, seq_file_ra_mul);
> F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_segment_mode, gc_segment_mode);
> F2FS_RW_ATTR(F2FS_SBI, f2fs_sb_info, gc_reclaimed_segments, gc_reclaimed_segs);
>
> @@ -838,6 +847,7 @@ static struct attribute *f2fs_attrs[] = {
> ATTR_LIST(atgc_candidate_count),
> ATTR_LIST(atgc_age_weight),
> ATTR_LIST(atgc_age_threshold),
> + ATTR_LIST(seq_file_ra_mul),
> ATTR_LIST(gc_segment_mode),
> ATTR_LIST(gc_reclaimed_segments),
> NULL,
>