Some utils, like dmidecode and smbios, need to access SMBIOS entry
table area in order to get information like SMBIOS version, size, etc.
Currently it's done via /dev/mem. But for situation when /dev/mem
usage is disabled, the utils have to use dmi sysfs instead, which
doesn't represent SMBIOS entry. So this patch adds SMBIOS area to
dmi-sysfs in order to allow utils in question to work correctly with
dmi sysfs interface.
Reviewed-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Ivan Khoronzhuk <[email protected]>
---
v1: https://lkml.org/lkml/2015/1/23/643
v2: https://lkml.org/lkml/2015/1/26/345
v3: https://lkml.org/lkml/2015/1/28/768
v4..v2:
firmware: dmi_scan: add symbol to get SMBIOS entry area
- used u8 type for smbios_header var
firmware: dmi-sysfs: add SMBIOS entry point area attribute
- replaced -ENODATA on -EINVAL
v3..v2:
firmware: dmi_scan: add symbol to get SMBIOS entry area
firmware: dmi-sysfs: add SMBIOS entry point area attribute
- combined in one patch
- added SMBIOS information to ABI sysfs-dmi documentaton
v2..v1:
firmware: dmi_scan: add symbol to get SMBIOS entry area
- used additional static var to hold SMBIOS raw table size
- changed format of get_smbios_entry_area symbol
returned pointer on const smbios table
firmware: dmi-sysfs: add SMBIOS entry point area attribute
- adopted to updated get_smbios_entry_area symbol
- removed redundant array to save smbios table
Documentation/ABI/testing/sysfs-firmware-dmi | 10 +++++++
drivers/firmware/dmi-sysfs.c | 42 ++++++++++++++++++++++++++++
drivers/firmware/dmi_scan.c | 26 +++++++++++++++++
include/linux/dmi.h | 3 ++
4 files changed, 81 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi b/Documentation/ABI/testing/sysfs-firmware-dmi
index c78f9ab..3a9ffe8 100644
--- a/Documentation/ABI/testing/sysfs-firmware-dmi
+++ b/Documentation/ABI/testing/sysfs-firmware-dmi
@@ -12,6 +12,16 @@ Description:
cannot ensure that the data as exported to userland is
without error either.
+ The firmware provides DMI structures as a packed list of
+ data referenced by a SMBIOS table entry point. The SMBIOS
+ entry point contains general information, like SMBIOS
+ version, DMI table size, etc. The structure, content and
+ size of SMBIOS entry point is dependent on SMBIOS version.
+ That's why SMBIOS entry point is represented in dmi sysfs
+ like a raw attribute and is accessible via
+ /sys/firmware/dmi/smbios_raw_header. The format of SMBIOS
+ entry point header can be read in SMBIOS specification.
+
DMI is structured as a large table of entries, where
each entry has a common header indicating the type and
length of the entry, as well as a firmware-provided
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index e0f1cb3..9b396d7 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -29,6 +29,8 @@
#define MAX_ENTRY_TYPE 255 /* Most of these aren't used, but we consider
the top entry type is only 8 bits */
+static const u8 *smbios_raw_header;
+
struct dmi_sysfs_entry {
struct dmi_header dh;
struct kobject kobj;
@@ -646,9 +648,37 @@ static void cleanup_entry_list(void)
}
}
+static ssize_t smbios_entry_area_raw_read(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t count)
+{
+ ssize_t size;
+
+ size = bin_attr->size;
+
+ if (size > pos)
+ size -= pos;
+ else
+ return 0;
+
+ if (count < size)
+ size = count;
+
+ memcpy(buf, &smbios_raw_header[pos], size);
+
+ return size;
+}
+
+static struct bin_attribute smbios_raw_area_attr = {
+ .read = smbios_entry_area_raw_read,
+ .attr = {.name = "smbios_raw_header", .mode = 0400},
+};
+
static int __init dmi_sysfs_init(void)
{
int error = -ENOMEM;
+ int size;
int val;
/* Set up our directory */
@@ -669,6 +699,18 @@ static int __init dmi_sysfs_init(void)
goto err;
}
+ smbios_raw_header = dmi_get_smbios_entry_area(&size);
+ if (!smbios_raw_header) {
+ pr_debug("dmi-sysfs: SMBIOS raw data is not available.\n");
+ error = -EINVAL;
+ goto err;
+ }
+
+ /* Create the raw binary file to access the entry area */
+ smbios_raw_area_attr.size = size;
+ if (sysfs_create_bin_file(dmi_kobj, &smbios_raw_area_attr))
+ goto err;
+
pr_debug("dmi-sysfs: loaded.\n");
return 0;
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 420c8d8..99c5f6c 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -113,6 +113,8 @@ static void dmi_table(u8 *buf, int len, int num,
}
}
+static u8 smbios_header[32];
+static int smbios_header_size;
static phys_addr_t dmi_base;
static u16 dmi_len;
static u16 dmi_num;
@@ -474,6 +476,8 @@ static int __init dmi_present(const u8 *buf)
if (memcmp(buf, "_SM_", 4) == 0 &&
buf[5] < 32 && dmi_checksum(buf, buf[5])) {
smbios_ver = get_unaligned_be16(buf + 6);
+ smbios_header_size = buf[5];
+ memcpy(smbios_header, buf, smbios_header_size);
/* Some BIOS report weird SMBIOS version, fix that up */
switch (smbios_ver) {
@@ -505,6 +509,8 @@ static int __init dmi_present(const u8 *buf)
pr_info("SMBIOS %d.%d present.\n",
dmi_ver >> 8, dmi_ver & 0xFF);
} else {
+ smbios_header_size = 15;
+ memcpy(smbios_header, buf, smbios_header_size);
dmi_ver = (buf[14] & 0xF0) << 4 |
(buf[14] & 0x0F);
pr_info("Legacy DMI %d.%d present.\n",
@@ -531,6 +537,8 @@ static int __init dmi_smbios3_present(const u8 *buf)
dmi_ver &= 0xFFFFFF;
dmi_len = get_unaligned_le32(buf + 12);
dmi_base = get_unaligned_le64(buf + 16);
+ smbios_header_size = buf[6];
+ memcpy(smbios_header, buf, smbios_header_size);
/*
* The 64-bit SMBIOS 3.0 entry point no longer has a field
@@ -944,3 +952,21 @@ void dmi_memdev_name(u16 handle, const char **bank, const char **device)
}
}
EXPORT_SYMBOL_GPL(dmi_memdev_name);
+
+/**
+ * dmi_get_smbios_entry_area - copy SMBIOS entry point area to array.
+ * @size - pointer to assign actual size of SMBIOS entry point area.
+ *
+ * returns NULL if table is not available, otherwise returns pointer on
+ * SMBIOS entry point area array.
+ */
+const u8 *dmi_get_smbios_entry_area(int *size)
+{
+ if (!smbios_header_size || !dmi_available)
+ return NULL;
+
+ *size = smbios_header_size;
+
+ return smbios_header;
+}
+EXPORT_SYMBOL_GPL(dmi_get_smbios_entry_area);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index f820f0a..8e1a28d 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -109,6 +109,7 @@ extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
void *private_data);
extern bool dmi_match(enum dmi_field f, const char *str);
extern void dmi_memdev_name(u16 handle, const char **bank, const char **device);
+const u8 *dmi_get_smbios_entry_area(int *size);
#else
@@ -140,6 +141,8 @@ static inline void dmi_memdev_name(u16 handle, const char **bank,
const char **device) { }
static inline const struct dmi_system_id *
dmi_first_match(const struct dmi_system_id *list) { return NULL; }
+static inline const u8 *dmi_get_smbios_entry_area(int *size)
+ { return NULL; }
#endif
--
1.9.1
Hi Matt,
On 02/04/2015 07:06 PM, Ivan Khoronzhuk wrote:
> Some utils, like dmidecode and smbios, need to access SMBIOS entry
> table area in order to get information like SMBIOS version, size, etc.
> Currently it's done via /dev/mem. But for situation when /dev/mem
> usage is disabled, the utils have to use dmi sysfs instead, which
> doesn't represent SMBIOS entry. So this patch adds SMBIOS area to
> dmi-sysfs in order to allow utils in question to work correctly with
> dmi sysfs interface.
>
> Reviewed-by: Ard Biesheuvel <[email protected]>
> Signed-off-by: Ivan Khoronzhuk <[email protected]>
> ---
>
> v1: https://lkml.org/lkml/2015/1/23/643
> v2: https://lkml.org/lkml/2015/1/26/345
> v3: https://lkml.org/lkml/2015/1/28/768
>
> v4..v2:
> firmware: dmi_scan: add symbol to get SMBIOS entry area
> - used u8 type for smbios_header var
> firmware: dmi-sysfs: add SMBIOS entry point area attribute
> - replaced -ENODATA on -EINVAL
>
> v3..v2:
> firmware: dmi_scan: add symbol to get SMBIOS entry area
> firmware: dmi-sysfs: add SMBIOS entry point area attribute
> - combined in one patch
> - added SMBIOS information to ABI sysfs-dmi documentaton
>
> v2..v1:
> firmware: dmi_scan: add symbol to get SMBIOS entry area
> - used additional static var to hold SMBIOS raw table size
> - changed format of get_smbios_entry_area symbol
> returned pointer on const smbios table
>
> firmware: dmi-sysfs: add SMBIOS entry point area attribute
> - adopted to updated get_smbios_entry_area symbol
> - removed redundant array to save smbios table
>
> Documentation/ABI/testing/sysfs-firmware-dmi | 10 +++++++
> drivers/firmware/dmi-sysfs.c | 42 ++++++++++++++++++++++++++++
> drivers/firmware/dmi_scan.c | 26 +++++++++++++++++
> include/linux/dmi.h | 3 ++
> 4 files changed, 81 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi b/Documentation/ABI/testing/sysfs-firmware-dmi
> index c78f9ab..3a9ffe8 100644
> --- a/Documentation/ABI/testing/sysfs-firmware-dmi
> +++ b/Documentation/ABI/testing/sysfs-firmware-dmi
> @@ -12,6 +12,16 @@ Description:
> cannot ensure that the data as exported to userland is
> without error either.
>
> + The firmware provides DMI structures as a packed list of
> + data referenced by a SMBIOS table entry point. The SMBIOS
> + entry point contains general information, like SMBIOS
> + version, DMI table size, etc. The structure, content and
> + size of SMBIOS entry point is dependent on SMBIOS version.
> + That's why SMBIOS entry point is represented in dmi sysfs
> + like a raw attribute and is accessible via
> + /sys/firmware/dmi/smbios_raw_header. The format of SMBIOS
> + entry point header can be read in SMBIOS specification.
> +
> DMI is structured as a large table of entries, where
> each entry has a common header indicating the type and
> length of the entry, as well as a firmware-provided
> diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
> index e0f1cb3..9b396d7 100644
> --- a/drivers/firmware/dmi-sysfs.c
> +++ b/drivers/firmware/dmi-sysfs.c
> @@ -29,6 +29,8 @@
> #define MAX_ENTRY_TYPE 255 /* Most of these aren't used, but we consider
> the top entry type is only 8 bits */
>
> +static const u8 *smbios_raw_header;
> +
> struct dmi_sysfs_entry {
> struct dmi_header dh;
> struct kobject kobj;
> @@ -646,9 +648,37 @@ static void cleanup_entry_list(void)
> }
> }
>
> +static ssize_t smbios_entry_area_raw_read(struct file *filp,
> + struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buf, loff_t pos, size_t count)
> +{
> + ssize_t size;
> +
> + size = bin_attr->size;
> +
> + if (size > pos)
> + size -= pos;
> + else
> + return 0;
> +
> + if (count < size)
> + size = count;
> +
> + memcpy(buf, &smbios_raw_header[pos], size);
> +
> + return size;
> +}
> +
> +static struct bin_attribute smbios_raw_area_attr = {
> + .read = smbios_entry_area_raw_read,
> + .attr = {.name = "smbios_raw_header", .mode = 0400},
> +};
> +
> static int __init dmi_sysfs_init(void)
> {
> int error = -ENOMEM;
> + int size;
> int val;
>
> /* Set up our directory */
> @@ -669,6 +699,18 @@ static int __init dmi_sysfs_init(void)
> goto err;
> }
>
> + smbios_raw_header = dmi_get_smbios_entry_area(&size);
> + if (!smbios_raw_header) {
> + pr_debug("dmi-sysfs: SMBIOS raw data is not available.\n");
> + error = -EINVAL;
> + goto err;
> + }
> +
> + /* Create the raw binary file to access the entry area */
> + smbios_raw_area_attr.size = size;
> + if (sysfs_create_bin_file(dmi_kobj, &smbios_raw_area_attr))
> + goto err;
> +
> pr_debug("dmi-sysfs: loaded.\n");
>
> return 0;
> diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
> index 420c8d8..99c5f6c 100644
> --- a/drivers/firmware/dmi_scan.c
> +++ b/drivers/firmware/dmi_scan.c
> @@ -113,6 +113,8 @@ static void dmi_table(u8 *buf, int len, int num,
> }
> }
>
> +static u8 smbios_header[32];
> +static int smbios_header_size;
> static phys_addr_t dmi_base;
> static u16 dmi_len;
> static u16 dmi_num;
> @@ -474,6 +476,8 @@ static int __init dmi_present(const u8 *buf)
> if (memcmp(buf, "_SM_", 4) == 0 &&
> buf[5] < 32 && dmi_checksum(buf, buf[5])) {
> smbios_ver = get_unaligned_be16(buf + 6);
> + smbios_header_size = buf[5];
> + memcpy(smbios_header, buf, smbios_header_size);
>
> /* Some BIOS report weird SMBIOS version, fix that up */
> switch (smbios_ver) {
> @@ -505,6 +509,8 @@ static int __init dmi_present(const u8 *buf)
> pr_info("SMBIOS %d.%d present.\n",
> dmi_ver >> 8, dmi_ver & 0xFF);
> } else {
> + smbios_header_size = 15;
> + memcpy(smbios_header, buf, smbios_header_size);
> dmi_ver = (buf[14] & 0xF0) << 4 |
> (buf[14] & 0x0F);
> pr_info("Legacy DMI %d.%d present.\n",
> @@ -531,6 +537,8 @@ static int __init dmi_smbios3_present(const u8 *buf)
> dmi_ver &= 0xFFFFFF;
> dmi_len = get_unaligned_le32(buf + 12);
> dmi_base = get_unaligned_le64(buf + 16);
> + smbios_header_size = buf[6];
> + memcpy(smbios_header, buf, smbios_header_size);
>
> /*
> * The 64-bit SMBIOS 3.0 entry point no longer has a field
> @@ -944,3 +952,21 @@ void dmi_memdev_name(u16 handle, const char **bank, const char **device)
> }
> }
> EXPORT_SYMBOL_GPL(dmi_memdev_name);
> +
> +/**
> + * dmi_get_smbios_entry_area - copy SMBIOS entry point area to array.
> + * @size - pointer to assign actual size of SMBIOS entry point area.
> + *
> + * returns NULL if table is not available, otherwise returns pointer on
> + * SMBIOS entry point area array.
> + */
> +const u8 *dmi_get_smbios_entry_area(int *size)
> +{
> + if (!smbios_header_size || !dmi_available)
> + return NULL;
> +
> + *size = smbios_header_size;
> +
> + return smbios_header;
> +}
> +EXPORT_SYMBOL_GPL(dmi_get_smbios_entry_area);
> diff --git a/include/linux/dmi.h b/include/linux/dmi.h
> index f820f0a..8e1a28d 100644
> --- a/include/linux/dmi.h
> +++ b/include/linux/dmi.h
> @@ -109,6 +109,7 @@ extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
> void *private_data);
> extern bool dmi_match(enum dmi_field f, const char *str);
> extern void dmi_memdev_name(u16 handle, const char **bank, const char **device);
> +const u8 *dmi_get_smbios_entry_area(int *size);
>
> #else
>
> @@ -140,6 +141,8 @@ static inline void dmi_memdev_name(u16 handle, const char **bank,
> const char **device) { }
> static inline const struct dmi_system_id *
> dmi_first_match(const struct dmi_system_id *list) { return NULL; }
> +static inline const u8 *dmi_get_smbios_entry_area(int *size)
> + { return NULL; }
>
> #endif
>
If you are Ok with this patch, could you please pickup it?
On Tue, 10 Feb, at 11:51:44AM, Ivan Khoronzhuk wrote:
>
> If you are Ok with this patch, could you please pickup it?
Applied, thanks Ivan!
--
Matt Fleming, Intel Open Source Technology Center
On Wed, 11 Feb, at 02:17:03PM, Matt Fleming wrote:
> On Tue, 10 Feb, at 11:51:44AM, Ivan Khoronzhuk wrote:
> >
> > If you are Ok with this patch, could you please pickup it?
>
> Applied, thanks Ivan!
Btw this patch doesn't apply cleanly, the reject looks like this,
--- drivers/firmware/dmi_scan.c
+++ drivers/firmware/dmi_scan.c
@@ -537,6 +543,8 @@
dmi_ver &= 0xFFFFFF;
dmi_len = get_unaligned_le32(buf + 12);
dmi_base = get_unaligned_le64(buf + 16);
+ smbios_header_size = buf[6];
+ memcpy(smbios_header, buf, smbios_header_size);
/*
* The 64-bit SMBIOS 3.0 entry point no longer has a field
What version of the kernel did you base this patch on? The conflict is
trivial to fixup and I've done so and pushed it out on the EFI 'next'
branch, but I wanted to call out this conflict explicitly.
--
Matt Fleming, Intel Open Source Technology Center
On 02/11/2015 04:43 PM, Matt Fleming wrote:
> On Wed, 11 Feb, at 02:17:03PM, Matt Fleming wrote:
>> On Tue, 10 Feb, at 11:51:44AM, Ivan Khoronzhuk wrote:
>>> If you are Ok with this patch, could you please pickup it?
>> Applied, thanks Ivan!
> Btw this patch doesn't apply cleanly, the reject looks like this,
>
> --- drivers/firmware/dmi_scan.c
> +++ drivers/firmware/dmi_scan.c
> @@ -537,6 +543,8 @@
> dmi_ver &= 0xFFFFFF;
The problem is in above string.
I used linux next, but I had one patch before.
Sorry... just forgot about it.
I've attached the same patch but on top of linux_next,
it can be applied cleanly.
Sorry once again and thanks!
> dmi_len = get_unaligned_le32(buf + 12);
> dmi_base = get_unaligned_le64(buf + 16);
> + smbios_header_size = buf[6];
> + memcpy(smbios_header, buf, smbios_header_size);
>
> /*
> * The 64-bit SMBIOS 3.0 entry point no longer has a field
>
> What version of the kernel did you base this patch on? The conflict is
> trivial to fixup and I've done so and pushed it out on the EFI 'next'
> branch, but I wanted to call out this conflict explicitly.
>
Hi Ivan,
Sorry for the late review.
On Wed, 4 Feb 2015 19:06:03 +0200, Ivan Khoronzhuk wrote:
> Some utils, like dmidecode and smbios, need to access SMBIOS entry
> table area in order to get information like SMBIOS version, size, etc.
> Currently it's done via /dev/mem. But for situation when /dev/mem
> usage is disabled, the utils have to use dmi sysfs instead, which
> doesn't represent SMBIOS entry. So this patch adds SMBIOS area to
> dmi-sysfs in order to allow utils in question to work correctly with
> dmi sysfs interface.
>
> Reviewed-by: Ard Biesheuvel <[email protected]>
> Signed-off-by: Ivan Khoronzhuk <[email protected]>
> ---
>
> v1: https://lkml.org/lkml/2015/1/23/643
> v2: https://lkml.org/lkml/2015/1/26/345
> v3: https://lkml.org/lkml/2015/1/28/768
>
> v4..v2:
Please always provide a list of changes from the previous version of
the patch, otherwise it's quite confusing.
> firmware: dmi_scan: add symbol to get SMBIOS entry area
> - used u8 type for smbios_header var
> firmware: dmi-sysfs: add SMBIOS entry point area attribute
> - replaced -ENODATA on -EINVAL
>
> v3..v2:
> firmware: dmi_scan: add symbol to get SMBIOS entry area
> firmware: dmi-sysfs: add SMBIOS entry point area attribute
> - combined in one patch
> - added SMBIOS information to ABI sysfs-dmi documentaton
>
> v2..v1:
> firmware: dmi_scan: add symbol to get SMBIOS entry area
> - used additional static var to hold SMBIOS raw table size
> - changed format of get_smbios_entry_area symbol
> returned pointer on const smbios table
>
> firmware: dmi-sysfs: add SMBIOS entry point area attribute
> - adopted to updated get_smbios_entry_area symbol
> - removed redundant array to save smbios table
>
> Documentation/ABI/testing/sysfs-firmware-dmi | 10 +++++++
> drivers/firmware/dmi-sysfs.c | 42 ++++++++++++++++++++++++++++
> drivers/firmware/dmi_scan.c | 26 +++++++++++++++++
> include/linux/dmi.h | 3 ++
> 4 files changed, 81 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi b/Documentation/ABI/testing/sysfs-firmware-dmi
> index c78f9ab..3a9ffe8 100644
> --- a/Documentation/ABI/testing/sysfs-firmware-dmi
> +++ b/Documentation/ABI/testing/sysfs-firmware-dmi
> @@ -12,6 +12,16 @@ Description:
> cannot ensure that the data as exported to userland is
> without error either.
>
> + The firmware provides DMI structures as a packed list of
> + data referenced by a SMBIOS table entry point. The SMBIOS
> + entry point contains general information, like SMBIOS
> + version, DMI table size, etc. The structure, content and
> + size of SMBIOS entry point is dependent on SMBIOS version.
> + That's why SMBIOS entry point is represented in dmi sysfs
> + like a raw attribute and is accessible via
> + /sys/firmware/dmi/smbios_raw_header. The format of SMBIOS
As mentioned before, I don't like the name "smbios_raw_header". I think
it should be "smbios_entry_point" or similar.
> + entry point header can be read in SMBIOS specification.
> +
> DMI is structured as a large table of entries, where
> each entry has a common header indicating the type and
> length of the entry, as well as a firmware-provided
> diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
> index e0f1cb3..9b396d7 100644
> --- a/drivers/firmware/dmi-sysfs.c
> +++ b/drivers/firmware/dmi-sysfs.c
> @@ -29,6 +29,8 @@
> #define MAX_ENTRY_TYPE 255 /* Most of these aren't used, but we consider
> the top entry type is only 8 bits */
>
> +static const u8 *smbios_raw_header;
> +
> struct dmi_sysfs_entry {
> struct dmi_header dh;
> struct kobject kobj;
> @@ -646,9 +648,37 @@ static void cleanup_entry_list(void)
> }
> }
>
> +static ssize_t smbios_entry_area_raw_read(struct file *filp,
This is confusing again, now it's named "entry_area"? Please be
consistent and use entry_point everywhere.
As mentioned before I believe that this code should live in dmi_scan
and not dmi-sysfs.
> + struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buf, loff_t pos, size_t count)
> +{
> + ssize_t size;
> +
> + size = bin_attr->size;
> +
> + if (size > pos)
> + size -= pos;
> + else
> + return 0;
> +
> + if (count < size)
> + size = count;
> +
> + memcpy(buf, &smbios_raw_header[pos], size);
> +
> + return size;
> +}
> +
> +static struct bin_attribute smbios_raw_area_attr = {
> + .read = smbios_entry_area_raw_read,
> + .attr = {.name = "smbios_raw_header", .mode = 0400},
> +};
> +
> static int __init dmi_sysfs_init(void)
> {
> int error = -ENOMEM;
> + int size;
> int val;
>
> /* Set up our directory */
> @@ -669,6 +699,18 @@ static int __init dmi_sysfs_init(void)
> goto err;
> }
>
> + smbios_raw_header = dmi_get_smbios_entry_area(&size);
> + if (!smbios_raw_header) {
> + pr_debug("dmi-sysfs: SMBIOS raw data is not available.\n");
> + error = -EINVAL;
> + goto err;
> + }
I don't think this should have been a fatal error. Just because for
some reason dmi_get_smbios_entry_area() returned NULL is no good reason
for nor exposing /sys/firmware/dmi/entries as we used to.
But anyway this is no longer relevant if the code is moved to dmi_scan
as I suggested.
> +
> + /* Create the raw binary file to access the entry area */
> + smbios_raw_area_attr.size = size;
> + if (sysfs_create_bin_file(dmi_kobj, &smbios_raw_area_attr))
> + goto err;
I think this should have had a corresponding call to
sysfs_remove_bin_file() in dmi_sysfs_exit(). (Again no longer relevant
if the code is moved.)
> +
> pr_debug("dmi-sysfs: loaded.\n");
>
> return 0;
> diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
> index 420c8d8..99c5f6c 100644
> --- a/drivers/firmware/dmi_scan.c
> +++ b/drivers/firmware/dmi_scan.c
> @@ -113,6 +113,8 @@ static void dmi_table(u8 *buf, int len, int num,
> }
> }
>
> +static u8 smbios_header[32];
> +static int smbios_header_size;
> static phys_addr_t dmi_base;
> static u16 dmi_len;
> static u16 dmi_num;
> @@ -474,6 +476,8 @@ static int __init dmi_present(const u8 *buf)
> if (memcmp(buf, "_SM_", 4) == 0 &&
> buf[5] < 32 && dmi_checksum(buf, buf[5])) {
> smbios_ver = get_unaligned_be16(buf + 6);
> + smbios_header_size = buf[5];
> + memcpy(smbios_header, buf, smbios_header_size);
>
> /* Some BIOS report weird SMBIOS version, fix that up */
> switch (smbios_ver) {
> @@ -505,6 +509,8 @@ static int __init dmi_present(const u8 *buf)
> pr_info("SMBIOS %d.%d present.\n",
> dmi_ver >> 8, dmi_ver & 0xFF);
> } else {
> + smbios_header_size = 15;
> + memcpy(smbios_header, buf, smbios_header_size);
> dmi_ver = (buf[14] & 0xF0) << 4 |
> (buf[14] & 0x0F);
> pr_info("Legacy DMI %d.%d present.\n",
> @@ -531,6 +537,8 @@ static int __init dmi_smbios3_present(const u8 *buf)
> dmi_ver &= 0xFFFFFF;
> dmi_len = get_unaligned_le32(buf + 12);
> dmi_base = get_unaligned_le64(buf + 16);
> + smbios_header_size = buf[6];
> + memcpy(smbios_header, buf, smbios_header_size);
>
> /*
> * The 64-bit SMBIOS 3.0 entry point no longer has a field
> @@ -944,3 +952,21 @@ void dmi_memdev_name(u16 handle, const char **bank, const char **device)
> }
> }
> EXPORT_SYMBOL_GPL(dmi_memdev_name);
> +
> +/**
> + * dmi_get_smbios_entry_area - copy SMBIOS entry point area to array.
> + * @size - pointer to assign actual size of SMBIOS entry point area.
> + *
> + * returns NULL if table is not available, otherwise returns pointer on
> + * SMBIOS entry point area array.
> + */
> +const u8 *dmi_get_smbios_entry_area(int *size)
> +{
> + if (!smbios_header_size || !dmi_available)
I don't see why you need to check for !dmi_available. If
smbios_header_size is non-zero then the required data is available. It
is independent from dmi_walk_early() having succeeded or not.
If you really believe that this function should return NULL if
dmi_walk_early() failed (I don't), then you should be consistent and
only fill up smbios_header after dmi_walk_early() has been successfully
called.
> + return NULL;
> +
> + *size = smbios_header_size;
> +
> + return smbios_header;
> +}
> +EXPORT_SYMBOL_GPL(dmi_get_smbios_entry_area);
> diff --git a/include/linux/dmi.h b/include/linux/dmi.h
> index f820f0a..8e1a28d 100644
> --- a/include/linux/dmi.h
> +++ b/include/linux/dmi.h
> @@ -109,6 +109,7 @@ extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
> void *private_data);
> extern bool dmi_match(enum dmi_field f, const char *str);
> extern void dmi_memdev_name(u16 handle, const char **bank, const char **device);
> +const u8 *dmi_get_smbios_entry_area(int *size);
>
> #else
>
> @@ -140,6 +141,8 @@ static inline void dmi_memdev_name(u16 handle, const char **bank,
> const char **device) { }
> static inline const struct dmi_system_id *
> dmi_first_match(const struct dmi_system_id *list) { return NULL; }
> +static inline const u8 *dmi_get_smbios_entry_area(int *size)
> + { return NULL; }
>
> #endif
>
There's one thing I do not understand. I seem to understand that the
goal behind this patch is to be able to run dmidecode without /dev/mem.
Dmidecode currently reads 2 areas from /dev/mem: the 0xF0000-0xFFFFF
area in search of the entry point, and the DMI data table itself. With
this patch you make the entry point available through sysfs. But
dmidecode will still need to access /dev/mem to access the DMI data
table. So that does not really solve anything, does it?
If we expose the raw DMI/SMBIOS entry point through sysfs, I believe we
want to expose the DMI table there too.
Thanks,
--
Jean Delvare
SUSE L3 Support