2015-02-23 07:55:52

by Srinivas Kandagatla

[permalink] [raw]
Subject: [PATCH 07/12] ARM: DT: apq8064: Add usb host support to CM QS-600

From: Nicolas Dechesne <[email protected]>

This patch adds device tree nodes to support two usb hosts on Compulab QS600 board.

Signed-off-by: Nicolas Dechesne <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 6e62f24..af2e075 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -41,6 +41,22 @@
};
};

+ usb3_phy:phy@12520000 {
+ status = "ok";
+ };
+
+ usb4_phy:phy@12530000 {
+ status = "ok";
+ };
+
+ usb3: usb@12520000 {
+ status = "ok";
+ };
+
+ usb4: usb@12530000 {
+ status = "ok";
+ };
+
/* on board fixed 3.3v supply */
v3p3_pcieclk: v3p3-pcieclk {
compatible = "regulator-fixed";
--
1.9.1


2015-02-23 12:02:18

by Igor Grinberg

[permalink] [raw]
Subject: Re: [PATCH 07/12] ARM: DT: apq8064: Add usb host support to CM QS-600



On 02/23/15 09:55, Srinivas Kandagatla wrote:
> From: Nicolas Dechesne <[email protected]>
>
> This patch adds device tree nodes to support two usb hosts on Compulab QS600 board.
>
> Signed-off-by: Nicolas Dechesne <[email protected]>

Acked-by: Igor Grinberg <[email protected]>

> ---
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index 6e62f24..af2e075 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -41,6 +41,22 @@
> };
> };
>
> + usb3_phy:phy@12520000 {
> + status = "ok";
> + };
> +
> + usb4_phy:phy@12530000 {
> + status = "ok";
> + };
> +
> + usb3: usb@12520000 {
> + status = "ok";
> + };
> +
> + usb4: usb@12530000 {
> + status = "ok";
> + };
> +
> /* on board fixed 3.3v supply */
> v3p3_pcieclk: v3p3-pcieclk {
> compatible = "regulator-fixed";
>

--
Regards,
Igor.