2024-01-18 18:12:02

by Jacob Lott

[permalink] [raw]
Subject: [PATCH v3] staging: rts5208: Add more details to Kconfig help

The current help text is short and triggers a
warning from checkpatch.pl. This patch adds more
details to the help text which should provide better
information for whether or not to enable the driver.

Signed-off-by: Jacob Lott <[email protected]>
---
drivers/staging/rts5208/Kconfig | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/rts5208/Kconfig b/drivers/staging/rts5208/Kconfig
index b864023d3ccb..c4664a26ba3b 100644
--- a/drivers/staging/rts5208/Kconfig
+++ b/drivers/staging/rts5208/Kconfig
@@ -3,7 +3,11 @@ config RTS5208
tristate "Realtek PCI-E Card Reader RTS5208/5288 support"
depends on PCI && SCSI
help
- Say Y here to include driver code to support the Realtek
- PCI-E card reader rts5208/rts5288.
+ Choose Y here to enable support for the Realtek PCI-E card reader
+ RTS5208/5288. This driver facilitates communication between the Linux
+ kernel and the Realtek PCI-E card reader.

- If this driver is compiled as a module, it will be named rts5208.
+ If you opt to compile this driver as a module, it will be named rts5208.
+ Selecting N will exclude this driver from the kernel build. Choose option
+ Y if your system includes the Realtek PCI-E card reader rts5208/rts5288.
+ When in doubt, it is generally safe to select N.
--
2.34.1

v3 fixes the tab spacing for line 6 in Kconfig


2024-01-18 19:00:03

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH v3] staging: rts5208: Add more details to Kconfig help

On Thu, Jan 18, 2024 at 12:59:48PM -0500, Jacob Lott wrote:
> The current help text is short and triggers a
> warning from checkpatch.pl. This patch adds more
> details to the help text which should provide better
> information for whether or not to enable the driver.
>
> Signed-off-by: Jacob Lott <[email protected]>
> ---
> drivers/staging/rts5208/Kconfig | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/rts5208/Kconfig b/drivers/staging/rts5208/Kconfig
> index b864023d3ccb..c4664a26ba3b 100644
> --- a/drivers/staging/rts5208/Kconfig
> +++ b/drivers/staging/rts5208/Kconfig
> @@ -3,7 +3,11 @@ config RTS5208
> tristate "Realtek PCI-E Card Reader RTS5208/5288 support"
> depends on PCI && SCSI
> help
> - Say Y here to include driver code to support the Realtek
> - PCI-E card reader rts5208/rts5288.
> + Choose Y here to enable support for the Realtek PCI-E card reader
> + RTS5208/5288. This driver facilitates communication between the Linux
> + kernel and the Realtek PCI-E card reader.
>
> - If this driver is compiled as a module, it will be named rts5208.
> + If you opt to compile this driver as a module, it will be named rts5208.
> + Selecting N will exclude this driver from the kernel build. Choose option
> + Y if your system includes the Realtek PCI-E card reader rts5208/rts5288.
> + When in doubt, it is generally safe to select N.
> --
> 2.34.1
>
> v3 fixes the tab spacing for line 6 in Kconfig


Hi,

This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
did not list below the --- line any changes from the previous version.
Please read the section entitled "The canonical patch format" in the
kernel file, Documentation/process/submitting-patches.rst for what
needs to be done here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

2024-01-18 19:20:07

by Randy Dunlap

[permalink] [raw]
Subject: Re: [PATCH v3] staging: rts5208: Add more details to Kconfig help



On 1/18/24 10:59, Greg KH wrote:
> On Thu, Jan 18, 2024 at 12:59:48PM -0500, Jacob Lott wrote:
>> The current help text is short and triggers a
>> warning from checkpatch.pl. This patch adds more
>> details to the help text which should provide better
>> information for whether or not to enable the driver.
>>
>> Signed-off-by: Jacob Lott <[email protected]>
>> ---
>> drivers/staging/rts5208/Kconfig | 10 +++++++---
>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/staging/rts5208/Kconfig b/drivers/staging/rts5208/Kconfig
>> index b864023d3ccb..c4664a26ba3b 100644
>> --- a/drivers/staging/rts5208/Kconfig
>> +++ b/drivers/staging/rts5208/Kconfig
>> @@ -3,7 +3,11 @@ config RTS5208
>> tristate "Realtek PCI-E Card Reader RTS5208/5288 support"
>> depends on PCI && SCSI
>> help
>> - Say Y here to include driver code to support the Realtek
>> - PCI-E card reader rts5208/rts5288.
>> + Choose Y here to enable support for the Realtek PCI-E card reader
>> + RTS5208/5288. This driver facilitates communication between the Linux
>> + kernel and the Realtek PCI-E card reader.
>>
>> - If this driver is compiled as a module, it will be named rts5208.
>> + If you opt to compile this driver as a module, it will be named rts5208.
>> + Selecting N will exclude this driver from the kernel build. Choose option
>> + Y if your system includes the Realtek PCI-E card reader rts5208/rts5288.
>> + When in doubt, it is generally safe to select N.
>> --
>> 2.34.1
>>
>> v3 fixes the tab spacing for line 6 in Kconfig
>
>
> Hi,
>
> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
> a patch that has triggered this response. He used to manually respond
> to these common problems, but in order to save his sanity (he kept
> writing the same thing over and over, yet to different people), I was
> created. Hopefully you will not take offence and will fix the problem
> in your patch and resubmit it so that it can be accepted into the Linux
> kernel tree.
>
> You are receiving this message because of the following common error(s)
> as indicated below:
>
> - This looks like a new version of a previously submitted patch, but you
> did not list below the --- line any changes from the previous version.

Jacob,
Immediately below the "---" line, not at the end of the patch.


> Please read the section entitled "The canonical patch format" in the
> kernel file, Documentation/process/submitting-patches.rst for what
> needs to be done here to properly describe this.
>
> If you wish to discuss this problem further, or you have questions about
> how to resolve this issue, please feel free to respond to this email and
> Greg will reply once he has dug out from the pending patches received
> from other developers.
>
> thanks,
>
> greg k-h's patch email bot
>

--
#Randy

2024-01-18 19:22:03

by Jacob Lott

[permalink] [raw]
Subject: Re: [PATCH v3] staging: rts5208: Add more details to Kconfig help


On 1/18/24 2:19 PM, Randy Dunlap wrote:
>
> On 1/18/24 10:59, Greg KH wrote:
>> On Thu, Jan 18, 2024 at 12:59:48PM -0500, Jacob Lott wrote:
>>> The current help text is short and triggers a
>>> warning from checkpatch.pl. This patch adds more
>>> details to the help text which should provide better
>>> information for whether or not to enable the driver.
>>>
>>> Signed-off-by: Jacob Lott <[email protected]>
>>> ---
>>> drivers/staging/rts5208/Kconfig | 10 +++++++---
>>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/staging/rts5208/Kconfig b/drivers/staging/rts5208/Kconfig
>>> index b864023d3ccb..c4664a26ba3b 100644
>>> --- a/drivers/staging/rts5208/Kconfig
>>> +++ b/drivers/staging/rts5208/Kconfig
>>> @@ -3,7 +3,11 @@ config RTS5208
>>> tristate "Realtek PCI-E Card Reader RTS5208/5288 support"
>>> depends on PCI && SCSI
>>> help
>>> - Say Y here to include driver code to support the Realtek
>>> - PCI-E card reader rts5208/rts5288.
>>> + Choose Y here to enable support for the Realtek PCI-E card reader
>>> + RTS5208/5288. This driver facilitates communication between the Linux
>>> + kernel and the Realtek PCI-E card reader.
>>>
>>> - If this driver is compiled as a module, it will be named rts5208.
>>> + If you opt to compile this driver as a module, it will be named rts5208.
>>> + Selecting N will exclude this driver from the kernel build. Choose option
>>> + Y if your system includes the Realtek PCI-E card reader rts5208/rts5288.
>>> + When in doubt, it is generally safe to select N.
>>> --
>>> 2.34.1
>>>
>>> v3 fixes the tab spacing for line 6 in Kconfig
>>
>> Hi,
>>
>> This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
>> a patch that has triggered this response. He used to manually respond
>> to these common problems, but in order to save his sanity (he kept
>> writing the same thing over and over, yet to different people), I was
>> created. Hopefully you will not take offence and will fix the problem
>> in your patch and resubmit it so that it can be accepted into the Linux
>> kernel tree.
>>
>> You are receiving this message because of the following common error(s)
>> as indicated below:
>>
>> - This looks like a new version of a previously submitted patch, but you
>> did not list below the --- line any changes from the previous version.
> Jacob,
> Immediately below the "---" line, not at the end of the patch.
>
>
>> Please read the section entitled "The canonical patch format" in the
>> kernel file, Documentation/process/submitting-patches.rst for what
>> needs to be done here to properly describe this.
>>
>> If you wish to discuss this problem further, or you have questions about
>> how to resolve this issue, please feel free to respond to this email and
>> Greg will reply once he has dug out from the pending patches received
>> from other developers.
>>
>> thanks,
>>
>> greg k-h's patch email bot
>>
Just sent a fixed version over. I appreciate the feedback and patience
on this.