Default MMU-500 reset operation disables context caching in
prefetch buffer. It is however expected for context banks using
the ACTLR register to retain their prefetch value during reset
and runtime suspend.
Replace default MMU-500 reset operation with Qualcomm specific reset
operation which envelope the default reset operation and re-enables
context caching in prefetch buffer for Qualcomm SoCs.
Signed-off-by: Bibek Kumar Patro <[email protected]>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++--
1 file changed, 34 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 549ae4dba3a6..000e207346af 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -14,6 +14,16 @@
#define QCOM_DUMMY_VAL -1
+/*
+ * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
+ * macro TLB) and BIT(1) as CPRE (Enable context caching in the prefetch
+ * buffer). The remaining bits are implementation defined and vary across
+ * SoCs.
+ */
+
+#define CPRE (1 << 1)
+#define CMTLB (1 << 0)
+
static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
{
return container_of(smmu, struct qcom_smmu, smmu);
@@ -376,11 +386,32 @@ static int qcom_smmu_def_domain_type(struct device *dev)
return match ? IOMMU_DOMAIN_IDENTITY : 0;
}
+static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
+{
+ int ret;
+ u32 val;
+ int i;
+
+ ret = arm_mmu500_reset(smmu);
+
+ if (ret)
+ return ret;
+
+ /* arm_mmu500_reset() disables CPRE which is re-enabled here */
+ for (i = 0; i < smmu->num_context_banks; ++i) {
+ val = arm_smmu_cb_read(smmu, i, ARM_SMMU_CB_ACTLR);
+ val |= CPRE;
+ arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_ACTLR, val);
+ }
+
+ return 0;
+}
+
static int qcom_sdm845_smmu500_reset(struct arm_smmu_device *smmu)
{
int ret;
- arm_mmu500_reset(smmu);
+ qcom_smmu500_reset(smmu);
/*
* To address performance degradation in non-real time clients,
@@ -407,7 +438,7 @@ static const struct arm_smmu_impl qcom_smmu_500_impl = {
.init_context = qcom_smmu_init_context,
.cfg_probe = qcom_smmu_cfg_probe,
.def_domain_type = qcom_smmu_def_domain_type,
- .reset = arm_mmu500_reset,
+ .reset = qcom_smmu500_reset,
.write_s2cr = qcom_smmu_write_s2cr,
.tlb_sync = qcom_smmu_tlb_sync,
};
@@ -432,7 +463,7 @@ static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = {
static const struct arm_smmu_impl qcom_adreno_smmu_500_impl = {
.init_context = qcom_adreno_smmu_init_context,
.def_domain_type = qcom_smmu_def_domain_type,
- .reset = arm_mmu500_reset,
+ .reset = qcom_smmu500_reset,
.alloc_context_bank = qcom_adreno_smmu_alloc_context_bank,
.write_sctlr = qcom_adreno_smmu_write_sctlr,
.tlb_sync = qcom_smmu_tlb_sync,
--
2.17.1
On 1/9/24 12:42, Bibek Kumar Patro wrote:
> Default MMU-500 reset operation disables context caching in
> prefetch buffer. It is however expected for context banks using
> the ACTLR register to retain their prefetch value during reset
> and runtime suspend.
>
> Replace default MMU-500 reset operation with Qualcomm specific reset
> operation which envelope the default reset operation and re-enables
> context caching in prefetch buffer for Qualcomm SoCs.
>
> Signed-off-by: Bibek Kumar Patro <[email protected]>
> ---
> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++--
> 1 file changed, 34 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> index 549ae4dba3a6..000e207346af 100644
> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
> @@ -14,6 +14,16 @@
>
> #define QCOM_DUMMY_VAL -1
>
> +/*
> + * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
> + * macro TLB) and BIT(1) as CPRE (Enable context caching in the prefetch
> + * buffer). The remaining bits are implementation defined and vary across
> + * SoCs.
> + */
> +
> +#define CPRE (1 << 1)
> +#define CMTLB (1 << 0)
> +
> static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
> {
> return container_of(smmu, struct qcom_smmu, smmu);
> @@ -376,11 +386,32 @@ static int qcom_smmu_def_domain_type(struct device *dev)
> return match ? IOMMU_DOMAIN_IDENTITY : 0;
> }
>
> +static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
> +{
> + int ret;
> + u32 val;
> + int i;
> +
> + ret = arm_mmu500_reset(smmu);
> +
> + if (ret)
Weird empty line.. Please remove it in the next revision since you're
already going to send a new one..
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
On 1/10/2024 4:30 PM, Konrad Dybcio wrote:
>
>
> On 1/9/24 12:42, Bibek Kumar Patro wrote:
>> Default MMU-500 reset operation disables context caching in
>> prefetch buffer. It is however expected for context banks using
>> the ACTLR register to retain their prefetch value during reset
>> and runtime suspend.
>>
>> Replace default MMU-500 reset operation with Qualcomm specific reset
>> operation which envelope the default reset operation and re-enables
>> context caching in prefetch buffer for Qualcomm SoCs.
>>
>> Signed-off-by: Bibek Kumar Patro <[email protected]>
>> ---
>> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++--
>> 1 file changed, 34 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> index 549ae4dba3a6..000e207346af 100644
>> --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
>> @@ -14,6 +14,16 @@
>>
>> #define QCOM_DUMMY_VAL -1
>>
>> +/*
>> + * SMMU-500 TRM defines BIT(0) as CMTLB (Enable context caching in the
>> + * macro TLB) and BIT(1) as CPRE (Enable context caching in the prefetch
>> + * buffer). The remaining bits are implementation defined and vary
>> across
>> + * SoCs.
>> + */
>> +
>> +#define CPRE (1 << 1)
>> +#define CMTLB (1 << 0)
>> +
>> static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu)
>> {
>> return container_of(smmu, struct qcom_smmu, smmu);
>> @@ -376,11 +386,32 @@ static int qcom_smmu_def_domain_type(struct
>> device *dev)
>> return match ? IOMMU_DOMAIN_IDENTITY : 0;
>> }
>>
>> +static int qcom_smmu500_reset(struct arm_smmu_device *smmu)
>> +{
>> + int ret;
>> + u32 val;
>> + int i;
>> +
>> + ret = arm_mmu500_reset(smmu);
>> +
>> + if (ret)
> Weird empty line.. Please remove it in the next revision since you're
> already going to send a new one..
>
> Reviewed-by: Konrad Dybcio <[email protected]>
>
Ack, thanks for pointing this out.
Will remove this while sending out the new patch.
Thanks & regards,
Bibek
> Konrad