Subject: [PATCH] docs: Update Sphinx requirements
Commit f546ff0c0c07 ("Move our minimum Sphinx version to 1.7") raised
the minimum version to 1.7.
For pdfdocs, sphinx_pre_install says:
note: If you want pdf, you need at least Sphinx 2.4.4.
, and current requirements.txt installs Sphinx 2.4.4.
Update Sphinx versions mentioned in docs and remove a note on earlier
Sphinx versions.
Update zh_CN and it_IT translations as well.
Signed-off-by: Akira Yokosawa <[email protected]>
Cc: Federico Vaga <[email protected]>
Cc: Alex Shi <[email protected]>
---
Documentation/doc-guide/sphinx.rst | 22 ++++++++----------
Documentation/process/changes.rst | 2 +-
.../translations/it_IT/doc-guide/sphinx.rst | 23 ++++++++-----------
.../translations/it_IT/process/changes.rst | 2 +-
.../translations/zh_CN/doc-guide/sphinx.rst | 21 ++++++++---------
5 files changed, 29 insertions(+), 41 deletions(-)
diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst
index ec3e71f56009..e445cb146efe 100644
--- a/Documentation/doc-guide/sphinx.rst
+++ b/Documentation/doc-guide/sphinx.rst
@@ -27,7 +27,7 @@ Sphinx Install
==============
The ReST markups currently used by the Documentation/ files are meant to be
-built with ``Sphinx`` version 1.3 or higher.
+built with ``Sphinx`` version 1.7 or higher.
There's a script that checks for the Sphinx requirements. Please see
:ref:`sphinx-pre-install` for further details.
@@ -43,10 +43,6 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.
.. note::
- #) Sphinx versions below 1.5 don't work properly with Python's
- docutils version 0.13.1 or higher. So, if you're willing to use
- those versions, you should run ``pip install 'docutils==0.12'``.
-
#) It is recommended to use the RTD theme for html output. Depending
on the Sphinx version, it should be installed separately,
with ``pip install sphinx_rtd_theme``.
@@ -55,13 +51,13 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.
those expressions are written using LaTeX notation. It needs texlive
installed with amsfonts and amsmath in order to evaluate them.
-In summary, if you want to install Sphinx version 1.7.9, you should do::
+In summary, if you want to install Sphinx version 2.4.4, you should do::
- $ virtualenv sphinx_1.7.9
- $ . sphinx_1.7.9/bin/activate
- (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
+ $ virtualenv sphinx_2.4.4
+ $ . sphinx_2.4.4/bin/activate
+ (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
-After running ``. sphinx_1.7.9/bin/activate``, the prompt will change,
+After running ``. sphinx_2.4.4/bin/activate``, the prompt will change,
in order to indicate that you're using the new environment. If you
open a new shell, you need to rerun this command to enter again at
the virtual environment before building the documentation.
@@ -81,7 +77,7 @@ output.
PDF and LaTeX builds
--------------------
-Such builds are currently supported only with Sphinx versions 1.4 and higher.
+Such builds are currently supported only with Sphinx versions 2.4 and higher.
For PDF and LaTeX output, you'll also need ``XeLaTeX`` version 3.14159265.
@@ -104,8 +100,8 @@ command line options for your distro::
You should run:
sudo dnf install -y texlive-luatex85
- /usr/bin/virtualenv sphinx_1.7.9
- . sphinx_1.7.9/bin/activate
+ /usr/bin/virtualenv sphinx_2.4.4
+ . sphinx_2.4.4/bin/activate
pip install -r Documentation/sphinx/requirements.txt
Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index e35ab74a0f80..b398b8576417 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -54,7 +54,7 @@ mcelog 0.6 mcelog --version
iptables 1.4.2 iptables -V
openssl & libcrypto 1.0.0 openssl version
bc 1.06.95 bc --version
-Sphinx\ [#f1]_ 1.3 sphinx-build --version
+Sphinx\ [#f1]_ 1.7 sphinx-build --version
====================== =============== ========================================
.. [#f1] Sphinx is needed only to build the Kernel documentation
diff --git a/Documentation/translations/it_IT/doc-guide/sphinx.rst b/Documentation/translations/it_IT/doc-guide/sphinx.rst
index 0046d75d9a70..9762452c584c 100644
--- a/Documentation/translations/it_IT/doc-guide/sphinx.rst
+++ b/Documentation/translations/it_IT/doc-guide/sphinx.rst
@@ -35,7 +35,7 @@ Installazione Sphinx
====================
I marcatori ReST utilizzati nei file in Documentation/ sono pensati per essere
-processati da ``Sphinx`` nella versione 1.3 o superiore.
+processati da ``Sphinx`` nella versione 1.7 o superiore.
Esiste uno script che verifica i requisiti Sphinx. Per ulteriori dettagli
consultate :ref:`it_sphinx-pre-install`.
@@ -53,11 +53,6 @@ pacchettizzato dalla vostra distribuzione.
.. note::
- #) Le versioni di Sphinx inferiori alla 1.5 non funzionano bene
- con il pacchetto Python docutils versione 0.13.1 o superiore.
- Se volete usare queste versioni, allora dovere eseguire
- ``pip install 'docutils==0.12'``.
-
#) Viene raccomandato l'uso del tema RTD per la documentazione in HTML.
A seconda della versione di Sphinx, potrebbe essere necessaria
l'installazione tramite il comando ``pip install sphinx_rtd_theme``.
@@ -67,13 +62,13 @@ pacchettizzato dalla vostra distribuzione.
utilizzando LaTeX. Per una corretta interpretazione, è necessario aver
installato texlive con i pacchetti amdfonts e amsmath.
-Riassumendo, se volete installare la versione 1.7.9 di Sphinx dovete eseguire::
+Riassumendo, se volete installare la versione 2.4.4 di Sphinx dovete eseguire::
- $ virtualenv sphinx_1.7.9
- $ . sphinx_1.7.9/bin/activate
- (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
+ $ virtualenv sphinx_2.4.4
+ $ . sphinx_2.4.4/bin/activate
+ (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
-Dopo aver eseguito ``. sphinx_1.7.9/bin/activate``, il prompt cambierà per
+Dopo aver eseguito ``. sphinx_2.4.4/bin/activate``, il prompt cambierà per
indicare che state usando il nuovo ambiente. Se aprite un nuova sessione,
prima di generare la documentazione, dovrete rieseguire questo comando per
rientrare nell'ambiente virtuale.
@@ -94,7 +89,7 @@ Generazione in PDF e LaTeX
--------------------------
Al momento, la generazione di questi documenti è supportata solo dalle
-versioni di Sphinx superiori alla 1.4.
+versioni di Sphinx superiori alla 2.4.
Per la generazione di PDF e LaTeX, avrete bisogno anche del pacchetto
``XeLaTeX`` nella versione 3.14159265
@@ -119,8 +114,8 @@ l'installazione::
You should run:
sudo dnf install -y texlive-luatex85
- /usr/bin/virtualenv sphinx_1.7.9
- . sphinx_1.7.9/bin/activate
+ /usr/bin/virtualenv sphinx_2.4.4
+ . sphinx_2.4.4/bin/activate
pip install -r Documentation/sphinx/requirements.txt
Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
diff --git a/Documentation/translations/it_IT/process/changes.rst b/Documentation/translations/it_IT/process/changes.rst
index 87d081889bfc..dc7193377b7f 100644
--- a/Documentation/translations/it_IT/process/changes.rst
+++ b/Documentation/translations/it_IT/process/changes.rst
@@ -57,7 +57,7 @@ mcelog 0.6 mcelog --version
iptables 1.4.2 iptables -V
openssl & libcrypto 1.0.0 openssl version
bc 1.06.95 bc --version
-Sphinx\ [#f1]_ 1.3 sphinx-build --version
+Sphinx\ [#f1]_ 1.7 sphinx-build --version
====================== ================= ========================================
.. [#f1] Sphinx è necessario solo per produrre la documentazione del Kernel
diff --git a/Documentation/translations/zh_CN/doc-guide/sphinx.rst b/Documentation/translations/zh_CN/doc-guide/sphinx.rst
index 951595c7d599..23eac67fbc30 100644
--- a/Documentation/translations/zh_CN/doc-guide/sphinx.rst
+++ b/Documentation/translations/zh_CN/doc-guide/sphinx.rst
@@ -26,7 +26,7 @@ reStructuredText文件可能包含包含来自源文件的结构化文档注释
安装Sphinx
==========
-Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
+Documentation/ 下的ReST文件现在使用sphinx1.7或更高版本构建。
这有一个脚本可以检查Sphinx的依赖项。更多详细信息见
:ref:`sphinx-pre-install_zh` 。
@@ -40,22 +40,19 @@ Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
.. note::
- #) 低于1.5版本的Sphinx无法与Python的0.13.1或更高版本docutils一起正常工作。
- 如果您想使用这些版本，那么应该运行 ``pip install 'docutils==0.12'`` 。
-
#) html输出建议使用RTD主题。根据Sphinx版本的不同，它应该用
``pip install sphinx_rtd_theme`` 单独安装。
#) 一些ReST页面包含数学表达式。由于Sphinx的工作方式，这些表达式是使用 LaTeX
编写的。它需要安装amsfonts和amsmath宏包，以便显示。
-总之，如您要安装Sphinx 1.7.9版本，应执行::
+总之，如您要安装Sphinx 2.4.4版本，应执行::
- $ virtualenv sphinx_1.7.9
- $ . sphinx_1.7.9/bin/activate
- (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
+ $ virtualenv sphinx_2.4.4
+ $ . sphinx_2.4.4/bin/activate
+ (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
-在运行 ``. sphinx_1.7.9/bin/activate`` 之后，提示符将变化，以指示您正在使用新
+在运行 ``. sphinx_2.4.4/bin/activate`` 之后，提示符将变化，以指示您正在使用新
环境。如果您打开了一个新的shell，那么在构建文档之前，您需要重新运行此命令以再
次进入虚拟环境中。
@@ -71,7 +68,7 @@ Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
PDF和LaTeX构建
--------------
-目前只有Sphinx 1.4及更高版本才支持这种构建。
+目前只有Sphinx 2.4及更高版本才支持这种构建。
对于PDF和LaTeX输出，还需要 ``XeLaTeX`` 3.14159265版本。（译注：此版本号真实
存在）
@@ -93,8 +90,8 @@ PDF和LaTeX构建
You should run:
sudo dnf install -y texlive-luatex85
- /usr/bin/virtualenv sphinx_1.7.9
- . sphinx_1.7.9/bin/activate
+ /usr/bin/virtualenv sphinx_2.4.4
+ . sphinx_2.4.4/bin/activate
pip install -r Documentation/sphinx/requirements.txt
Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
base-commit: 603bdf5d6c092eb05666decd84288dfda71eee90
--
2.17.1
On Wed, Nov 10, 2021 at 5:16 PM Akira Yokosawa <[email protected]> wrote:
>
> Subject: [PATCH] docs: Update Sphinx requirements
>
> Commit f546ff0c0c07 ("Move our minimum Sphinx version to 1.7") raised
> the minimum version to 1.7.
>
> For pdfdocs, sphinx_pre_install says:
>
> note: If you want pdf, you need at least Sphinx 2.4.4.
>
> , and current requirements.txt installs Sphinx 2.4.4.
>
> Update Sphinx versions mentioned in docs and remove a note on earlier
> Sphinx versions.
>
> Update zh_CN and it_IT translations as well.
>
> Signed-off-by: Akira Yokosawa <[email protected]>
Reviewed-by: Alex Shi <[email protected]>
> Cc: Federico Vaga <[email protected]>
> Cc: Alex Shi <[email protected]>
> ---
> Documentation/doc-guide/sphinx.rst | 22 ++++++++----------
> Documentation/process/changes.rst | 2 +-
> .../translations/it_IT/doc-guide/sphinx.rst | 23 ++++++++-----------
> .../translations/it_IT/process/changes.rst | 2 +-
> .../translations/zh_CN/doc-guide/sphinx.rst | 21 ++++++++---------
> 5 files changed, 29 insertions(+), 41 deletions(-)
>
> diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst
> index ec3e71f56009..e445cb146efe 100644
> --- a/Documentation/doc-guide/sphinx.rst
> +++ b/Documentation/doc-guide/sphinx.rst
> @@ -27,7 +27,7 @@ Sphinx Install
> ==============
>
> The ReST markups currently used by the Documentation/ files are meant to be
> -built with ``Sphinx`` version 1.3 or higher.
> +built with ``Sphinx`` version 1.7 or higher.
>
> There's a script that checks for the Sphinx requirements. Please see
> :ref:`sphinx-pre-install` for further details.
> @@ -43,10 +43,6 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.
>
> .. note::
>
> - #) Sphinx versions below 1.5 don't work properly with Python's
> - docutils version 0.13.1 or higher. So, if you're willing to use
> - those versions, you should run ``pip install 'docutils==0.12'``.
> -
> #) It is recommended to use the RTD theme for html output. Depending
> on the Sphinx version, it should be installed separately,
> with ``pip install sphinx_rtd_theme``.
> @@ -55,13 +51,13 @@ or ``virtualenv``, depending on how your distribution packaged Python 3.
> those expressions are written using LaTeX notation. It needs texlive
> installed with amsfonts and amsmath in order to evaluate them.
>
> -In summary, if you want to install Sphinx version 1.7.9, you should do::
> +In summary, if you want to install Sphinx version 2.4.4, you should do::
>
> - $ virtualenv sphinx_1.7.9
> - $ . sphinx_1.7.9/bin/activate
> - (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
> + $ virtualenv sphinx_2.4.4
> + $ . sphinx_2.4.4/bin/activate
> + (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
>
> -After running ``. sphinx_1.7.9/bin/activate``, the prompt will change,
> +After running ``. sphinx_2.4.4/bin/activate``, the prompt will change,
> in order to indicate that you're using the new environment. If you
> open a new shell, you need to rerun this command to enter again at
> the virtual environment before building the documentation.
> @@ -81,7 +77,7 @@ output.
> PDF and LaTeX builds
> --------------------
>
> -Such builds are currently supported only with Sphinx versions 1.4 and higher.
> +Such builds are currently supported only with Sphinx versions 2.4 and higher.
>
> For PDF and LaTeX output, you'll also need ``XeLaTeX`` version 3.14159265.
>
> @@ -104,8 +100,8 @@ command line options for your distro::
> You should run:
>
> sudo dnf install -y texlive-luatex85
> - /usr/bin/virtualenv sphinx_1.7.9
> - . sphinx_1.7.9/bin/activate
> + /usr/bin/virtualenv sphinx_2.4.4
> + . sphinx_2.4.4/bin/activate
> pip install -r Documentation/sphinx/requirements.txt
>
> Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
> diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
> index e35ab74a0f80..b398b8576417 100644
> --- a/Documentation/process/changes.rst
> +++ b/Documentation/process/changes.rst
> @@ -54,7 +54,7 @@ mcelog 0.6 mcelog --version
> iptables 1.4.2 iptables -V
> openssl & libcrypto 1.0.0 openssl version
> bc 1.06.95 bc --version
> -Sphinx\ [#f1]_ 1.3 sphinx-build --version
> +Sphinx\ [#f1]_ 1.7 sphinx-build --version
> ====================== =============== ========================================
>
> .. [#f1] Sphinx is needed only to build the Kernel documentation
> diff --git a/Documentation/translations/it_IT/doc-guide/sphinx.rst b/Documentation/translations/it_IT/doc-guide/sphinx.rst
> index 0046d75d9a70..9762452c584c 100644
> --- a/Documentation/translations/it_IT/doc-guide/sphinx.rst
> +++ b/Documentation/translations/it_IT/doc-guide/sphinx.rst
> @@ -35,7 +35,7 @@ Installazione Sphinx
> ====================
>
> I marcatori ReST utilizzati nei file in Documentation/ sono pensati per essere
> -processati da ``Sphinx`` nella versione 1.3 o superiore.
> +processati da ``Sphinx`` nella versione 1.7 o superiore.
>
> Esiste uno script che verifica i requisiti Sphinx. Per ulteriori dettagli
> consultate :ref:`it_sphinx-pre-install`.
> @@ -53,11 +53,6 @@ pacchettizzato dalla vostra distribuzione.
>
> .. note::
>
> - #) Le versioni di Sphinx inferiori alla 1.5 non funzionano bene
> - con il pacchetto Python docutils versione 0.13.1 o superiore.
> - Se volete usare queste versioni, allora dovere eseguire
> - ``pip install 'docutils==0.12'``.
> -
> #) Viene raccomandato l'uso del tema RTD per la documentazione in HTML.
> A seconda della versione di Sphinx, potrebbe essere necessaria
> l'installazione tramite il comando ``pip install sphinx_rtd_theme``.
> @@ -67,13 +62,13 @@ pacchettizzato dalla vostra distribuzione.
> utilizzando LaTeX. Per una corretta interpretazione, è necessario aver
> installato texlive con i pacchetti amdfonts e amsmath.
>
> -Riassumendo, se volete installare la versione 1.7.9 di Sphinx dovete eseguire::
> +Riassumendo, se volete installare la versione 2.4.4 di Sphinx dovete eseguire::
>
> - $ virtualenv sphinx_1.7.9
> - $ . sphinx_1.7.9/bin/activate
> - (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
> + $ virtualenv sphinx_2.4.4
> + $ . sphinx_2.4.4/bin/activate
> + (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
>
> -Dopo aver eseguito ``. sphinx_1.7.9/bin/activate``, il prompt cambierà per
> +Dopo aver eseguito ``. sphinx_2.4.4/bin/activate``, il prompt cambierà per
> indicare che state usando il nuovo ambiente. Se aprite un nuova sessione,
> prima di generare la documentazione, dovrete rieseguire questo comando per
> rientrare nell'ambiente virtuale.
> @@ -94,7 +89,7 @@ Generazione in PDF e LaTeX
> --------------------------
>
> Al momento, la generazione di questi documenti è supportata solo dalle
> -versioni di Sphinx superiori alla 1.4.
> +versioni di Sphinx superiori alla 2.4.
>
> Per la generazione di PDF e LaTeX, avrete bisogno anche del pacchetto
> ``XeLaTeX`` nella versione 3.14159265
> @@ -119,8 +114,8 @@ l'installazione::
> You should run:
>
> sudo dnf install -y texlive-luatex85
> - /usr/bin/virtualenv sphinx_1.7.9
> - . sphinx_1.7.9/bin/activate
> + /usr/bin/virtualenv sphinx_2.4.4
> + . sphinx_2.4.4/bin/activate
> pip install -r Documentation/sphinx/requirements.txt
>
> Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
> diff --git a/Documentation/translations/it_IT/process/changes.rst b/Documentation/translations/it_IT/process/changes.rst
> index 87d081889bfc..dc7193377b7f 100644
> --- a/Documentation/translations/it_IT/process/changes.rst
> +++ b/Documentation/translations/it_IT/process/changes.rst
> @@ -57,7 +57,7 @@ mcelog 0.6 mcelog --version
> iptables 1.4.2 iptables -V
> openssl & libcrypto 1.0.0 openssl version
> bc 1.06.95 bc --version
> -Sphinx\ [#f1]_ 1.3 sphinx-build --version
> +Sphinx\ [#f1]_ 1.7 sphinx-build --version
> ====================== ================= ========================================
>
> .. [#f1] Sphinx è necessario solo per produrre la documentazione del Kernel
> diff --git a/Documentation/translations/zh_CN/doc-guide/sphinx.rst b/Documentation/translations/zh_CN/doc-guide/sphinx.rst
> index 951595c7d599..23eac67fbc30 100644
> --- a/Documentation/translations/zh_CN/doc-guide/sphinx.rst
> +++ b/Documentation/translations/zh_CN/doc-guide/sphinx.rst
> @@ -26,7 +26,7 @@ reStructuredText文件可能包含包含来自源文件的结构化文档注释
> 安装Sphinx
> ==========
>
> -Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
> +Documentation/ 下的ReST文件现在使用sphinx1.7或更高版本构建。
>
> 这有一个脚本可以检查Sphinx的依赖项。更多详细信息见
> :ref:`sphinx-pre-install_zh` 。
> @@ -40,22 +40,19 @@ Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
>
> .. note::
>
> - #) 低于1.5版本的Sphinx无法与Python的0.13.1或更高版本docutils一起正常工作。
> - 如果您想使用这些版本，那么应该运行 ``pip install 'docutils==0.12'`` 。
> -
> #) html输出建议使用RTD主题。根据Sphinx版本的不同，它应该用
> ``pip install sphinx_rtd_theme`` 单独安装。
>
> #) 一些ReST页面包含数学表达式。由于Sphinx的工作方式，这些表达式是使用 LaTeX
> 编写的。它需要安装amsfonts和amsmath宏包，以便显示。
>
> -总之，如您要安装Sphinx 1.7.9版本，应执行::
> +总之，如您要安装Sphinx 2.4.4版本，应执行::
>
> - $ virtualenv sphinx_1.7.9
> - $ . sphinx_1.7.9/bin/activate
> - (sphinx_1.7.9) $ pip install -r Documentation/sphinx/requirements.txt
> + $ virtualenv sphinx_2.4.4
> + $ . sphinx_2.4.4/bin/activate
> + (sphinx_2.4.4) $ pip install -r Documentation/sphinx/requirements.txt
>
> -在运行 ``. sphinx_1.7.9/bin/activate`` 之后，提示符将变化，以指示您正在使用新
> +在运行 ``. sphinx_2.4.4/bin/activate`` 之后，提示符将变化，以指示您正在使用新
> 环境。如果您打开了一个新的shell，那么在构建文档之前，您需要重新运行此命令以再
> 次进入虚拟环境中。
>
> @@ -71,7 +68,7 @@ Documentation/ 下的ReST文件现在使用sphinx1.3或更高版本构建。
> PDF和LaTeX构建
> --------------
>
> -目前只有Sphinx 1.4及更高版本才支持这种构建。
> +目前只有Sphinx 2.4及更高版本才支持这种构建。
>
> 对于PDF和LaTeX输出，还需要 ``XeLaTeX`` 3.14159265版本。（译注：此版本号真实
> 存在）
> @@ -93,8 +90,8 @@ PDF和LaTeX构建
> You should run:
>
> sudo dnf install -y texlive-luatex85
> - /usr/bin/virtualenv sphinx_1.7.9
> - . sphinx_1.7.9/bin/activate
> + /usr/bin/virtualenv sphinx_2.4.4
> + . sphinx_2.4.4/bin/activate
> pip install -r Documentation/sphinx/requirements.txt
>
> Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468.
>
> base-commit: 603bdf5d6c092eb05666decd84288dfda71eee90
> --
> 2.17.1
>
>
Akira Yokosawa <[email protected]> writes:
> Subject: [PATCH] docs: Update Sphinx requirements
>
> Commit f546ff0c0c07 ("Move our minimum Sphinx version to 1.7") raised
> the minimum version to 1.7.
>
> For pdfdocs, sphinx_pre_install says:
>
> note: If you want pdf, you need at least Sphinx 2.4.4.
>
> , and current requirements.txt installs Sphinx 2.4.4.
>
> Update Sphinx versions mentioned in docs and remove a note on earlier
> Sphinx versions.
It may be time to consider raising the minimum sphinx version
overall... meanwhile, though, I've applied this, thanks.
jon
On Mon, 15 Nov 2021 02:48:19 -0700
Jonathan Corbet wrote:
> Akira Yokosawa <[email protected]> writes:
>
>> Subject: [PATCH] docs: Update Sphinx requirements
>>
>> Commit f546ff0c0c07 ("Move our minimum Sphinx version to 1.7") raised
>> the minimum version to 1.7.
>>
>> For pdfdocs, sphinx_pre_install says:
>>
>> note: If you want pdf, you need at least Sphinx 2.4.4.
>>
>> , and current requirements.txt installs Sphinx 2.4.4.
>>
>> Update Sphinx versions mentioned in docs and remove a note on earlier
>> Sphinx versions.
>
> It may be time to consider raising the minimum sphinx version
> overall...
There is one thing we need to address (you might well be aware of).
Our Documentation/conf.py is not compatible for hrmldocs with
the combination sphinx_rtd_theme 1.0.0 and Sphinx >= 3.0.
This issue is the same as the one reported at:
https://github.com/readthedocs/sphinx_rtd_theme/issues/1240
"No stylesheet after upgrading to 1.0.0"
I tried the fix suggested there (html_css_files option),
and a stylesheet can be generated.
But the resulting html pages look quite different from the one
you see at https://www.kernel.org/doc/html/latest/ with the sans
font for text and distracting look of monospaced strings.
You can see a screenshot of such a page at
https://fars.ee/nkkZ
I guess there should be some knobs of Sphinx for customizing
the style, but have not figured them out.
Thoughts?
Thanks, Akira
> meanwhile, though, I've applied this, thanks.
>
> jon
>
On Tue, 16 Nov 2021 10:37:31 +0900
Akira Yokosawa wrote:
> On Mon, 15 Nov 2021 02:48:19 -0700
> Jonathan Corbet wrote:
>> Akira Yokosawa <[email protected]> writes:
>>
>>> Subject: [PATCH] docs: Update Sphinx requirements
>>>
>>> Commit f546ff0c0c07 ("Move our minimum Sphinx version to 1.7") raised
>>> the minimum version to 1.7.
>>>
>>> For pdfdocs, sphinx_pre_install says:
>>>
>>> note: If you want pdf, you need at least Sphinx 2.4.4.
>>>
>>> , and current requirements.txt installs Sphinx 2.4.4.
>>>
>>> Update Sphinx versions mentioned in docs and remove a note on earlier
>>> Sphinx versions.
>>
>> It may be time to consider raising the minimum sphinx version
>> overall...
>
> There is one thing we need to address (you might well be aware of).
>
> Our Documentation/conf.py is not compatible for hrmldocs with
> the combination sphinx_rtd_theme 1.0.0 and Sphinx >= 3.0.
> This issue is the same as the one reported at:
> https://github.com/readthedocs/sphinx_rtd_theme/issues/1240
> "No stylesheet after upgrading to 1.0.0"
>
> I tried the fix suggested there (html_css_files option),
> and a stylesheet can be generated.
> But the resulting html pages look quite different from the one
> you see at https://www.kernel.org/doc/html/latest/ with the sans
> font for text and distracting look of monospaced strings.
>
> You can see a screenshot of such a page at
> https://fars.ee/nkkZ
Having looked at https://sphinx-themes.org/sample-sites/sphinx-rtd-theme/,
I'm wondering if the screenshot above is exactly what you'd
expect by using the theme in the first place.
Hmm??
Thanks, Akira
>
> I guess there should be some knobs of Sphinx for customizing
> the style, but have not figured them out.
>
> Thoughts?
>
> Thanks, Akira
>
>> meanwhile, though, I've applied this, thanks.
>>
>> jon
>>