The commit that removed the Unisys s-Par and visorbus drivers
left around the include/linux/visorbus.h file mentioned in the
MAINTAINERS entry, we can also remove that too.
Fixes: e5f45b011e4a ("staging: Remove the drivers for the Unisys s-Par")
Signed-off-by: Peter Robinson <[email protected]>
---
include/linux/visorbus.h | 344 ---------------------------------------
1 file changed, 344 deletions(-)
delete mode 100644 include/linux/visorbus.h
diff --git a/include/linux/visorbus.h b/include/linux/visorbus.h
deleted file mode 100644
index 0d8bd6769b13..000000000000
--- a/include/linux/visorbus.h
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 - 2013 UNISYS CORPORATION
- * All rights reserved.
- */
-
-/*
- * This header file is to be included by other kernel mode components that
- * implement a particular kind of visor_device. Each of these other kernel
- * mode components is called a visor device driver. Refer to visortemplate
- * for a minimal sample visor device driver.
- *
- * There should be nothing in this file that is private to the visorbus
- * bus implementation itself.
- */
-
-#ifndef __VISORBUS_H__
-#define __VISORBUS_H__
-
-#include <linux/device.h>
-
-#define VISOR_CHANNEL_SIGNATURE ('L' << 24 | 'N' << 16 | 'C' << 8 | 'E')
-
-/*
- * enum channel_serverstate
- * @CHANNELSRV_UNINITIALIZED: Channel is in an undefined state.
- * @CHANNELSRV_READY: Channel has been initialized by server.
- */
-enum channel_serverstate {
- CHANNELSRV_UNINITIALIZED = 0,
- CHANNELSRV_READY = 1
-};
-
-/*
- * enum channel_clientstate
- * @CHANNELCLI_DETACHED:
- * @CHANNELCLI_DISABLED: Client can see channel but is NOT allowed to use it
- * unless given TBD* explicit request
- * (should actually be < DETACHED).
- * @CHANNELCLI_ATTACHING: Legacy EFI client request for EFI server to attach.
- * @CHANNELCLI_ATTACHED: Idle, but client may want to use channel any time.
- * @CHANNELCLI_BUSY: Client either wants to use or is using channel.
- * @CHANNELCLI_OWNED: "No worries" state - client can access channel
- * anytime.
- */
-enum channel_clientstate {
- CHANNELCLI_DETACHED = 0,
- CHANNELCLI_DISABLED = 1,
- CHANNELCLI_ATTACHING = 2,
- CHANNELCLI_ATTACHED = 3,
- CHANNELCLI_BUSY = 4,
- CHANNELCLI_OWNED = 5
-};
-
-/*
- * Values for VISOR_CHANNEL_PROTOCOL.Features: This define exists so that
- * a guest can look at the FeatureFlags in the io channel, and configure the
- * driver to use interrupts or not based on this setting. All feature bits for
- * all channels should be defined here. The io channel feature bits are defined
- * below.
- */
-#define VISOR_DRIVER_ENABLES_INTS (0x1ULL << 1)
-#define VISOR_CHANNEL_IS_POLLING (0x1ULL << 3)
-#define VISOR_IOVM_OK_DRIVER_DISABLING_INTS (0x1ULL << 4)
-#define VISOR_DRIVER_DISABLES_INTS (0x1ULL << 5)
-#define VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING (0x1ULL << 6)
-
-/*
- * struct channel_header - Common Channel Header
- * @signature: Signature.
- * @legacy_state: DEPRECATED - being replaced by.
- * @header_size: sizeof(struct channel_header).
- * @size: Total size of this channel in bytes.
- * @features: Flags to modify behavior.
- * @chtype: Channel type: data, bus, control, etc..
- * @partition_handle: ID of guest partition.
- * @handle: Device number of this channel in client.
- * @ch_space_offset: Offset in bytes to channel specific area.
- * @version_id: Struct channel_header Version ID.
- * @partition_index: Index of guest partition.
- * @zone_uuid: Guid of Channel's zone.
- * @cli_str_offset: Offset from channel header to null-terminated
- * ClientString (0 if ClientString not present).
- * @cli_state_boot: CHANNEL_CLIENTSTATE of pre-boot EFI client of this
- * channel.
- * @cmd_state_cli: CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
- * ServerStateUp, ServerStateDown, etc).
- * @cli_state_os: CHANNEL_CLIENTSTATE of Guest OS client of this channel.
- * @ch_characteristic: CHANNEL_CHARACTERISTIC_<xxx>.
- * @cmd_state_srv: CHANNEL_COMMANDSTATE (overloaded in Windows drivers, see
- * ServerStateUp, ServerStateDown, etc).
- * @srv_state: CHANNEL_SERVERSTATE.
- * @cli_error_boot: Bits to indicate err states for boot clients, so err
- * messages can be throttled.
- * @cli_error_os: Bits to indicate err states for OS clients, so err
- * messages can be throttled.
- * @filler: Pad out to 128 byte cacheline.
- * @recover_channel: Please add all new single-byte values below here.
- */
-struct channel_header {
- u64 signature;
- u32 legacy_state;
- /* SrvState, CliStateBoot, and CliStateOS below */
- u32 header_size;
- u64 size;
- u64 features;
- guid_t chtype;
- u64 partition_handle;
- u64 handle;
- u64 ch_space_offset;
- u32 version_id;
- u32 partition_index;
- guid_t zone_guid;
- u32 cli_str_offset;
- u32 cli_state_boot;
- u32 cmd_state_cli;
- u32 cli_state_os;
- u32 ch_characteristic;
- u32 cmd_state_srv;
- u32 srv_state;
- u8 cli_error_boot;
- u8 cli_error_os;
- u8 filler[1];
- u8 recover_channel;
-} __packed;
-
-#define VISOR_CHANNEL_ENABLE_INTS (0x1ULL << 0)
-
-/*
- * struct signal_queue_header - Subheader for the Signal Type variation of the
- * Common Channel.
- * @version: SIGNAL_QUEUE_HEADER Version ID.
- * @chtype: Queue type: storage, network.
- * @size: Total size of this queue in bytes.
- * @sig_base_offset: Offset to signal queue area.
- * @features: Flags to modify behavior.
- * @num_sent: Total # of signals placed in this queue.
- * @num_overflows: Total # of inserts failed due to full queue.
- * @signal_size: Total size of a signal for this queue.
- * @max_slots: Max # of slots in queue, 1 slot is always empty.
- * @max_signals: Max # of signals in queue (MaxSignalSlots-1).
- * @head: Queue head signal #.
- * @num_received: Total # of signals removed from this queue.
- * @tail: Queue tail signal.
- * @reserved1: Reserved field.
- * @reserved2: Reserved field.
- * @client_queue:
- * @num_irq_received: Total # of Interrupts received. This is incremented by the
- * ISR in the guest windows driver.
- * @num_empty: Number of times that visor_signal_remove is called and
- * returned Empty Status.
- * @errorflags: Error bits set during SignalReinit to denote trouble with
- * client's fields.
- * @filler: Pad out to 64 byte cacheline.
- */
-struct signal_queue_header {
- /* 1st cache line */
- u32 version;
- u32 chtype;
- u64 size;
- u64 sig_base_offset;
- u64 features;
- u64 num_sent;
- u64 num_overflows;
- u32 signal_size;
- u32 max_slots;
- u32 max_signals;
- u32 head;
- /* 2nd cache line */
- u64 num_received;
- u32 tail;
- u32 reserved1;
- u64 reserved2;
- u64 client_queue;
- u64 num_irq_received;
- u64 num_empty;
- u32 errorflags;
- u8 filler[12];
-} __packed;
-
-/* VISORCHANNEL Guids */
-/* {414815ed-c58c-11da-95a9-00e08161165f} */
-#define VISOR_VHBA_CHANNEL_GUID \
- GUID_INIT(0x414815ed, 0xc58c, 0x11da, \
- 0x95, 0xa9, 0x0, 0xe0, 0x81, 0x61, 0x16, 0x5f)
-#define VISOR_VHBA_CHANNEL_GUID_STR \
- "414815ed-c58c-11da-95a9-00e08161165f"
-struct visorchipset_state {
- u32 created:1;
- u32 attached:1;
- u32 configured:1;
- u32 running:1;
- /* Remaining bits in this 32-bit word are reserved. */
-};
-
-/**
- * struct visor_device - A device type for things "plugged" into the visorbus
- * bus
- * @visorchannel: Points to the channel that the device is
- * associated with.
- * @channel_type_guid: Identifies the channel type to the bus driver.
- * @device: Device struct meant for use by the bus driver
- * only.
- * @list_all: Used by the bus driver to enumerate devices.
- * @timer: Timer fired periodically to do interrupt-type
- * activity.
- * @being_removed: Indicates that the device is being removed from
- * the bus. Private bus driver use only.
- * @visordriver_callback_lock: Used by the bus driver to lock when adding and
- * removing devices.
- * @pausing: Indicates that a change towards a paused state.
- * is in progress. Only modified by the bus driver.
- * @resuming: Indicates that a change towards a running state
- * is in progress. Only modified by the bus driver.
- * @chipset_bus_no: Private field used by the bus driver.
- * @chipset_dev_no: Private field used the bus driver.
- * @state: Used to indicate the current state of the
- * device.
- * @inst: Unique GUID for this instance of the device.
- * @name: Name of the device.
- * @pending_msg_hdr: For private use by bus driver to respond to
- * hypervisor requests.
- * @vbus_hdr_info: A pointer to header info. Private use by bus
- * driver.
- * @partition_guid: Indicates client partion id. This should be the
- * same across all visor_devices in the current
- * guest. Private use by bus driver only.
- */
-struct visor_device {
- struct visorchannel *visorchannel;
- guid_t channel_type_guid;
- /* These fields are for private use by the bus driver only. */
- struct device device;
- struct list_head list_all;
- struct timer_list timer;
- bool timer_active;
- bool being_removed;
- struct mutex visordriver_callback_lock; /* synchronize probe/remove */
- bool pausing;
- bool resuming;
- u32 chipset_bus_no;
- u32 chipset_dev_no;
- struct visorchipset_state state;
- guid_t inst;
- u8 *name;
- struct controlvm_message_header *pending_msg_hdr;
- void *vbus_hdr_info;
- guid_t partition_guid;
- struct dentry *debugfs_dir;
- struct dentry *debugfs_bus_info;
-};
-
-#define to_visor_device(x) container_of(x, struct visor_device, device)
-
-typedef void (*visorbus_state_complete_func) (struct visor_device *dev,
- int status);
-
-/*
- * This struct describes a specific visor channel, by providing its GUID, name,
- * and sizes.
- */
-struct visor_channeltype_descriptor {
- const guid_t guid;
- const char *name;
- u64 min_bytes;
- u32 version;
-};
-
-/**
- * struct visor_driver - Information provided by each visor driver when it
- * registers with the visorbus driver
- * @name: Name of the visor driver.
- * @owner: The module owner.
- * @channel_types: Types of channels handled by this driver, ending with
- * a zero GUID. Our specialized BUS.match() method knows
- * about this list, and uses it to determine whether this
- * driver will in fact handle a new device that it has
- * detected.
- * @probe: Called when a new device comes online, by our probe()
- * function specified by driver.probe() (triggered
- * ultimately by some call to driver_register(),
- * bus_add_driver(), or driver_attach()).
- * @remove: Called when a new device is removed, by our remove()
- * function specified by driver.remove() (triggered
- * ultimately by some call to device_release_driver()).
- * @channel_interrupt: Called periodically, whenever there is a possiblity
- * that "something interesting" may have happened to the
- * channel.
- * @pause: Called to initiate a change of the device's state. If
- * the return valu`e is < 0, there was an error and the
- * state transition will NOT occur. If the return value
- * is >= 0, then the state transition was INITIATED
- * successfully, and complete_func() will be called (or
- * was just called) with the final status when either the
- * state transition fails or completes successfully.
- * @resume: Behaves similar to pause.
- * @driver: Private reference to the device driver. For use by bus
- * driver only.
- */
-struct visor_driver {
- const char *name;
- struct module *owner;
- struct visor_channeltype_descriptor *channel_types;
- int (*probe)(struct visor_device *dev);
- void (*remove)(struct visor_device *dev);
- void (*channel_interrupt)(struct visor_device *dev);
- int (*pause)(struct visor_device *dev,
- visorbus_state_complete_func complete_func);
- int (*resume)(struct visor_device *dev,
- visorbus_state_complete_func complete_func);
-
- /* These fields are for private use by the bus driver only. */
- struct device_driver driver;
-};
-
-#define to_visor_driver(x) (container_of(x, struct visor_driver, driver))
-
-int visor_check_channel(struct channel_header *ch, struct device *dev,
- const guid_t *expected_uuid, char *chname,
- u64 expected_min_bytes, u32 expected_version,
- u64 expected_signature);
-
-int visorbus_register_visor_driver(struct visor_driver *drv);
-void visorbus_unregister_visor_driver(struct visor_driver *drv);
-int visorbus_read_channel(struct visor_device *dev,
- unsigned long offset, void *dest,
- unsigned long nbytes);
-int visorbus_write_channel(struct visor_device *dev,
- unsigned long offset, void *src,
- unsigned long nbytes);
-int visorbus_enable_channel_interrupts(struct visor_device *dev);
-void visorbus_disable_channel_interrupts(struct visor_device *dev);
-
-int visorchannel_signalremove(struct visorchannel *channel, u32 queue,
- void *msg);
-int visorchannel_signalinsert(struct visorchannel *channel, u32 queue,
- void *msg);
-bool visorchannel_signalempty(struct visorchannel *channel, u32 queue);
-const guid_t *visorchannel_get_guid(struct visorchannel *channel);
-
-#define BUS_ROOT_DEVICE UINT_MAX
-struct visor_device *visorbus_get_device_by_id(u32 bus_no, u32 dev_no,
- struct visor_device *from);
-#endif
--
2.36.1
On lunedì 6 giugno 2022 15:22:00 CEST Peter Robinson wrote:
> The commit that removed the Unisys s-Par and visorbus drivers
> left around the include/linux/visorbus.h file mentioned in the
> MAINTAINERS entry, we can also remove that too.
>
> Fixes: e5f45b011e4a ("staging: Remove the drivers for the Unisys s-Par")
> Signed-off-by: Peter Robinson <[email protected]>
> ---
> include/linux/visorbus.h | 344 ---------------------------------------
> 1 file changed, 344 deletions(-)
> delete mode 100644 include/linux/visorbus.h
>
Good catch, I had overlooked this file.
Reviewed-by: Fabio M. De Francesco <[email protected]>
Thanks,
Fabio