Hello!
Since Linux 4.1, I'm getting a lot of IO_PAGE_FAULT like this one
[ 17.048609] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:11.0
domain=0x0008 address=0x40ebaaab00618000 flags=0x0010]
with different addresses:
0x40ebaaab00618000
0x40ebaaab00618040
0x0000000000000000
0x0000000000000180
0x00000000000000c0
0x0000000000000080
0x0000000000000100
0x0000000000000040
0x0000000000000140
0x00000000000001c0
0x0000000000000200
0x0000000000000240
0x0000000000000280
...
device=00:11.0 is:
# lspci -vvs 00:11.0
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI
1.0])
Subsystem: Gigabyte Technology Co., Ltd Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] SATA HBA v1.0 InCfgSpace
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Any idea what could be wrong?
Thanks,
kind regards,
Andreas Hartmann
+ joro.
On Tue, Jul 21, 2015 at 05:04:36PM +0200, Andreas Hartmann wrote:
> Hello!
>
> Since Linux 4.1, I'm getting a lot of IO_PAGE_FAULT like this one
>
> [ 17.048609] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:11.0
> domain=0x0008 address=0x40ebaaab00618000 flags=0x0010]
>
> with different addresses:
>
> 0x40ebaaab00618000
> 0x40ebaaab00618040
> 0x0000000000000000
> 0x0000000000000180
> 0x00000000000000c0
> 0x0000000000000080
> 0x0000000000000100
> 0x0000000000000040
> 0x0000000000000140
> 0x00000000000001c0
> 0x0000000000000200
> 0x0000000000000240
> 0x0000000000000280
>
> ...
>
> device=00:11.0 is:
>
> # lspci -vvs 00:11.0
> 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI
> 1.0])
> Subsystem: Gigabyte Technology Co., Ltd Device b002
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [70] SATA HBA v1.0 InCfgSpace
> Capabilities: [a4] PCI Advanced Features
> AFCap: TP+ FLR+
> AFCtrl: FLR-
> AFStatus: TP-
> Kernel driver in use: ahci
>
>
> Any idea what could be wrong?
>
>
> Thanks,
> kind regards,
> Andreas Hartmann
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--