On Wednesday 08 July 2015 05:56 PM, Vaibhav Hiremath wrote:
> This patch-series adds support for Device tree to 88PM800 mfd driver.
> It also sets default configuration of irq clear method if board file
> doesn't exist.
>
> Testing::
> - Boot tested on PXA1928 based platform.
> - probe of mfd, rtc and regulator function passing successfully.
> - Basic read operations on registers
> - irq clear configuration
>
> V5 => V6
> =======
I hope this will be queued for 4.2
Thanks,
Vaibhav
> Link to V5: https://lkml.org/lkml/2015/6/29/283
>
> - Added new patch to the series PATCH [1/6]
> Cleanup patch to remove duplicate dev_err messages
> - Added new patch to the series PACTH [3/6]
> Cleanup patch to get pdata from 'device' pointer instead of
> passing as a parameter.
> - Removed irq_clr_mode/irq_mode field from 'struct pm80x_chip'
> and use pdata.irq_clr_method to set irq clear method.
> - Added acked-by and reviewed-by to respective patches.
>
> V4 => V5
> =======
> Link to V4: https://lkml.org/lkml/2015/6/25/67
>
> - Renamed binding back again to 88pm800, as 'Yi Zhang' already started
> submitting 88pm88x, so 88pm8xx won't make sense. Better name would be to
> stick with 88pm80x.
> - Added new patch to series PATCH 2/4, to remove unwanted protection around
> padata
> - As suggested by Lee, added macro based implementation for CLEAR_ON_WRITE
> and CLEAR_ON_READ.
> - and fixed other trivial comments.
>
> V3 => V4
> =======
> Link to V3: https://lkml.org/lkml/2015/6/24/143
>
> - irq clear method is 88PM800 feature, which is not dependent on board or
> doesn't require any wiring changes, so DT is not the way.
> Hardcoded to "irq clear on write" if board file doesn't exist.
> - Updated binding patch (PATCH 3/3) to remove irq-clr-on-wr entry.
> - Since PATCH 3/3 changed from original, removed Rob's Acked-by.
>
> V2 => V3
> =======
> Link to V2: https://www.mail-archive.com/[email protected]/msg914299.html
>
> - Replaced deprecated "regulator-compatible" property with "regulator-name".
> - Added Rob's Acked-by to [PATCH 3/3]
>
> V1 => V2
> =======
> Link to V1: http://lkml.iu.edu/hypermail/linux/kernel/1505.3/04386.html
>
> - Split binding changes from original commit
> - Updated binding info as per Rob's suggestion
> - Dropped PATCH 4/4, as discussed during review
> - Dropped PATCH 3/4, as it is independent RTC code change,
> so will submit it separately to ease merging.
> - Fixed all other minor comments
>
> Attempt has been made to push some of the patches to the list sometime
> back in 2013.
>
> Link to previous patch submission:
> https://lkml.org/lkml/2013/8/14/86
>
>
> TODO:
> =====
> - init config for 88PM860 device
> - Rgulator driver changes to add support for 88PM860 device
>
>
>
> Vaibhav Hiremath (6):
> mfd: 88pm800: remove duplicate dev_err calls during probe
> mfd: 88pm800: Add device tree support
> mfd: 88pm800: Get pdata from 'device' rather than passing as a
> parameter
> mfd: 88pm800: Remove unnecessary protection around pdata
> mfd: 88pm800: Set default interrupt clear method
> mfd: devicetree: bindings: Add new 88pm800 mfd binding
>
> Documentation/devicetree/bindings/mfd/88pm800.txt | 53 ++++++++++
> drivers/mfd/88pm800.c | 113 +++++++++++-----------
> include/linux/mfd/88pm80x.h | 9 +-
> 3 files changed, 118 insertions(+), 57 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt
>
On Tuesday 14 July 2015 12:27 AM, Vaibhav Hiremath wrote:
>
>
> On Wednesday 08 July 2015 05:56 PM, Vaibhav Hiremath wrote:
>> This patch-series adds support for Device tree to 88PM800 mfd driver.
>> It also sets default configuration of irq clear method if board file
>> doesn't exist.
>>
>> Testing::
>> - Boot tested on PXA1928 based platform.
>> - probe of mfd, rtc and regulator function passing successfully.
>> - Basic read operations on registers
>> - irq clear configuration
>>
>> V5 => V6
>> =======
>
> I hope this will be queued for 4.2
>
Lee,
This patch-series is pending since long time, reviewed and acked.
Request to queue it up for next merge window.
Thanks,
Vaibhav