Hip05-D02 Development Board is based on Cortex-A57, this patchset
contains initial support for Hip05-D02 Soc and Board. Initial support
is minimal and includes just the arch configuration, device tree
configuration.
PSCI is enabled in device tree and there is no problem to boot all the
16 cores, and the CPU hotplug is also working now, you can download and
compile the latest firmware based on the following link to run this
patch set.
https://github.com/hisilicon/estuary/blob/master/README
Ding Tianhong (2):
arm64: hip05-d02: Document devicetree bindings for Hisilicon Hip05-D02
Board
arm64: dts: add dts files for Hisilicon Hip05-D02 Development Board
.../bindings/arm/hisilicon/hisilicon.txt | 4 +
arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 +++
arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 +++++++++++++++++++++
4 files changed, 312 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
--
1.9.0
This patch adds documentation for the devicetree bindings used by the
DT files of Hisilicon Hip05-D02 development board.
Signed-off-by: Ding Tianhong <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
---
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index c431c67..f98b39d 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -20,6 +20,10 @@ HiKey Board
Required root node properties:
- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+HiP05 D02 Board
+Required root node properties:
+ - compatible = "hisilicon,hip05-d02";
+
Hisilicon system controller
Required properties:
--
1.9.0
Add initial dtsi file to support Hisilicon Hip05-D02 Board with
support of CPUs in four clusters and each cluster has quard Cortex-A57.
Also add dts file to support Hip05-D02 development board.
Signed-off-by: Ding Tianhong <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
---
arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++
arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++
3 files changed, 308 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index fa81a6e..cd158b8 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
new file mode 100644
index 0000000..ae34e25
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -0,0 +1,36 @@
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip05.dtsi"
+
+/ {
+ model = "Hisilicon Hip05 D02 Development Board";
+ compatible = "hisilicon,hip05-d02";
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
new file mode 100644
index 0000000..da12d94
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -0,0 +1,271 @@
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hip05-d02";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&cpu8>;
+ };
+ core1 {
+ cpu = <&cpu9>;
+ };
+ core2 {
+ cpu = <&cpu10>;
+ };
+ core3 {
+ cpu = <&cpu11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&cpu12>;
+ };
+ core1 {
+ cpu = <&cpu13>;
+ };
+ core2 {
+ cpu = <&cpu14>;
+ };
+ core3 {
+ cpu = <&cpu15>;
+ };
+ };
+ };
+
+ cpu0: cpu@20000 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20000>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@20001 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@20002 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20002>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@20003 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20003>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@20100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@20101 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@20102 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@20103 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20103>;
+ enable-method = "psci";
+ };
+
+ cpu8: cpu@20200 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20200>;
+ enable-method = "psci";
+ };
+
+ cpu9: cpu@20201 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20201>;
+ enable-method = "psci";
+ };
+
+ cpu10: cpu@20202 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20202>;
+ enable-method = "psci";
+ };
+
+ cpu11: cpu@20203 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20203>;
+ enable-method = "psci";
+ };
+
+ cpu12: cpu@20300 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20300>;
+ enable-method = "psci";
+ };
+
+ cpu13: cpu@20301 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20301>;
+ enable-method = "psci";
+ };
+
+ cpu14: cpu@20302 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20302>;
+ enable-method = "psci";
+ };
+
+ cpu15: cpu@20303 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x20303>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@8d000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x30000>;
+ reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
+ <0x0 0x8d100000 0 0x300000>, /* GICR */
+ <0x0 0xfe000000 0 0x10000>, /* GICC */
+ <0x0 0xfe010000 0 0x10000>, /* GICH */
+ <0x0 0xfe020000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+
+ its_totems: interrupt-controller@8c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x8c000000 0x0 0x1000000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk200mhz: refclk200mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart0: uart@80300000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: uart@80310000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
--
1.9.0
On Sat, Aug 29, 2015 at 04:52:41PM +0800, Ding Tianhong wrote:
> Add initial dtsi file to support Hisilicon Hip05-D02 Board with
> support of CPUs in four clusters and each cluster has quard Cortex-A57.
>
> Also add dts file to support Hip05-D02 development board.
>
> Signed-off-by: Ding Tianhong <[email protected]>
> Signed-off-by: Kefeng Wang <[email protected]>
> ---
> arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
> arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++
> arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++
> 3 files changed, 308 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
>
> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
> index fa81a6e..cd158b8 100644
> --- a/arch/arm64/boot/dts/hisilicon/Makefile
> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
> @@ -1,4 +1,4 @@
> -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
> +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
> new file mode 100644
> index 0000000..ae34e25
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
> @@ -0,0 +1,36 @@
> +/**
> + * dts file for Hisilicon D02 Development Board
> + *
> + * Copyright (C) 2014,2015 Hisilicon Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "hip05.dtsi"
> +
> +/ {
> + model = "Hisilicon Hip05 D02 Development Board";
> + compatible = "hisilicon,hip05-d02";
> +
> + memory@00000000 {
> + device_type = "memory";
> + reg = <0x0 0x00000000 0x0 0x80000000>;
> + };
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&uart0 {
> + status = "ok";
> +};
> diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
> new file mode 100644
> index 0000000..da12d94
> --- /dev/null
> +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
> @@ -0,0 +1,271 @@
> +/**
> + * dts file for Hisilicon D02 Development Board
> + *
> + * Copyright (C) 2014,2015 Hisilicon Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
> + *
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "hisilicon,hip05-d02";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> + cluster1 {
> + core0 {
> + cpu = <&cpu4>;
> + };
> + core1 {
> + cpu = <&cpu5>;
> + };
> + core2 {
> + cpu = <&cpu6>;
> + };
> + core3 {
> + cpu = <&cpu7>;
> + };
> + };
> + cluster2 {
> + core0 {
> + cpu = <&cpu8>;
> + };
> + core1 {
> + cpu = <&cpu9>;
> + };
> + core2 {
> + cpu = <&cpu10>;
> + };
> + core3 {
> + cpu = <&cpu11>;
> + };
> + };
> + cluster3 {
> + core0 {
> + cpu = <&cpu12>;
> + };
> + core1 {
> + cpu = <&cpu13>;
> + };
> + core2 {
> + cpu = <&cpu14>;
> + };
> + core3 {
> + cpu = <&cpu15>;
> + };
> + };
> + };
> +
> + cpu0: cpu@20000 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
Change to "arm,cortex-a57","arm,armv8"?
> + reg = <0x20000>;
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu@20001 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20001>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu@20002 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20002>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu@20003 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20003>;
> + enable-method = "psci";
> + };
> +
> + cpu4: cpu@20100 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20100>;
> + enable-method = "psci";
> + };
> +
> + cpu5: cpu@20101 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20101>;
> + enable-method = "psci";
> + };
> +
> + cpu6: cpu@20102 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20102>;
> + enable-method = "psci";
> + };
> +
> + cpu7: cpu@20103 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20103>;
> + enable-method = "psci";
> + };
> +
> + cpu8: cpu@20200 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20200>;
> + enable-method = "psci";
> + };
> +
> + cpu9: cpu@20201 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20201>;
> + enable-method = "psci";
> + };
> +
> + cpu10: cpu@20202 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20202>;
> + enable-method = "psci";
> + };
> +
> + cpu11: cpu@20203 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20203>;
> + enable-method = "psci";
> + };
> +
> + cpu12: cpu@20300 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20300>;
> + enable-method = "psci";
> + };
> +
> + cpu13: cpu@20301 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20301>;
> + enable-method = "psci";
> + };
> +
> + cpu14: cpu@20302 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20302>;
> + enable-method = "psci";
> + };
> +
> + cpu15: cpu@20303 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x20303>;
> + enable-method = "psci";
> + };
> + };
> +
> + gic: interrupt-controller@8d000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x30000>;
> + reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
> + <0x0 0x8d100000 0 0x300000>, /* GICR */
> + <0x0 0xfe000000 0 0x10000>, /* GICC */
> + <0x0 0xfe010000 0 0x10000>, /* GICH */
> + <0x0 0xfe020000 0 0x10000>; /* GICV */
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> +
> + its_totems: interrupt-controller@8c000000 {
> + compatible = "arm,gic-v3-its";
> + msi-controller;
> + reg = <0x0 0x8c000000 0x0 0x1000000>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
Here have a question:
In devcie tree binding file: Documentation/devicetree/bindings/arm/gic.txt,
it only considers for maximum 8 cpus. So will we need change the
binding file and also use GIC_CPU_MASK_SIMPLE(16) for 16 cores?
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + refclk200mhz: refclk200mhz {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <200000000>;
> + };
> +
> + uart0: uart@80300000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x80300000 0x0 0x10000>;
> + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&refclk200mhz>;
> + clock-names = "apb_pclk";
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart1: uart@80310000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x80310000 0x0 0x10000>;
> + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&refclk200mhz>;
> + clock-names = "apb_pclk";
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> + };
> +};
> --
> 1.9.0
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 2015/8/31 21:12, Leo Yan wrote:
> On Sat, Aug 29, 2015 at 04:52:41PM +0800, Ding Tianhong wrote:
>> Add initial dtsi file to support Hisilicon Hip05-D02 Board with
>> support of CPUs in four clusters and each cluster has quard Cortex-A57.
>>
>> Also add dts file to support Hip05-D02 development board.
>>
>> Signed-off-by: Ding Tianhong <[email protected]>
>> Signed-off-by: Kefeng Wang <[email protected]>
>> ---
>> arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
>> arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++
>> arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++
>> 3 files changed, 308 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
>> index fa81a6e..cd158b8 100644
>> --- a/arch/arm64/boot/dts/hisilicon/Makefile
>> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
>> @@ -1,4 +1,4 @@
>> -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
>> +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
>>
>> always := $(dtb-y)
>> subdir-y := $(dts-dirs)
>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>> new file mode 100644
>> index 0000000..ae34e25
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>> @@ -0,0 +1,36 @@
>> +/**
>> + * dts file for Hisilicon D02 Development Board
>> + *
>> + * Copyright (C) 2014,2015 Hisilicon Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * publishhed by the Free Software Foundation.
>> + *
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "hip05.dtsi"
>> +
>> +/ {
>> + model = "Hisilicon Hip05 D02 Development Board";
>> + compatible = "hisilicon,hip05-d02";
>> +
>> + memory@00000000 {
>> + device_type = "memory";
>> + reg = <0x0 0x00000000 0x0 0x80000000>;
>> + };
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&uart0 {
>> + status = "ok";
>> +};
>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
>> new file mode 100644
>> index 0000000..da12d94
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
>> @@ -0,0 +1,271 @@
>> +/**
>> + * dts file for Hisilicon D02 Development Board
>> + *
>> + * Copyright (C) 2014,2015 Hisilicon Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * publishhed by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + compatible = "hisilicon,hip05-d02";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + psci {
>> + compatible = "arm,psci-0.2";
>> + method = "smc";
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu-map {
>> + cluster0 {
>> + core0 {
>> + cpu = <&cpu0>;
>> + };
>> + core1 {
>> + cpu = <&cpu1>;
>> + };
>> + core2 {
>> + cpu = <&cpu2>;
>> + };
>> + core3 {
>> + cpu = <&cpu3>;
>> + };
>> + };
>> + cluster1 {
>> + core0 {
>> + cpu = <&cpu4>;
>> + };
>> + core1 {
>> + cpu = <&cpu5>;
>> + };
>> + core2 {
>> + cpu = <&cpu6>;
>> + };
>> + core3 {
>> + cpu = <&cpu7>;
>> + };
>> + };
>> + cluster2 {
>> + core0 {
>> + cpu = <&cpu8>;
>> + };
>> + core1 {
>> + cpu = <&cpu9>;
>> + };
>> + core2 {
>> + cpu = <&cpu10>;
>> + };
>> + core3 {
>> + cpu = <&cpu11>;
>> + };
>> + };
>> + cluster3 {
>> + core0 {
>> + cpu = <&cpu12>;
>> + };
>> + core1 {
>> + cpu = <&cpu13>;
>> + };
>> + core2 {
>> + cpu = <&cpu14>;
>> + };
>> + core3 {
>> + cpu = <&cpu15>;
>> + };
>> + };
>> + };
>> +
>> + cpu0: cpu@20000 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>
> Change to "arm,cortex-a57","arm,armv8"?
>
Ok，but I think should be "hisilicon,hip05","arm,armv8".
>> + reg = <0x20000>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu1: cpu@20001 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20001>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu2: cpu@20002 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20002>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu3: cpu@20003 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20003>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu4: cpu@20100 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20100>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu5: cpu@20101 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20101>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu6: cpu@20102 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20102>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu7: cpu@20103 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20103>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu8: cpu@20200 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20200>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu9: cpu@20201 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20201>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu10: cpu@20202 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20202>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu11: cpu@20203 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20203>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu12: cpu@20300 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20300>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu13: cpu@20301 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20301>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu14: cpu@20302 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20302>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu15: cpu@20303 {
>> + device_type = "cpu";
>> + compatible = "arm,armv8";
>> + reg = <0x20303>;
>> + enable-method = "psci";
>> + };
>> + };
>> +
>> + gic: interrupt-controller@8d000000 {
>> + compatible = "arm,gic-v3";
>> + #interrupt-cells = <3>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + interrupt-controller;
>> + #redistributor-regions = <1>;
>> + redistributor-stride = <0x0 0x30000>;
>> + reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
>> + <0x0 0x8d100000 0 0x300000>, /* GICR */
>> + <0x0 0xfe000000 0 0x10000>, /* GICC */
>> + <0x0 0xfe010000 0 0x10000>, /* GICH */
>> + <0x0 0xfe020000 0 0x10000>; /* GICV */
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
>> +
>> + its_totems: interrupt-controller@8c000000 {
>> + compatible = "arm,gic-v3-its";
>> + msi-controller;
>> + reg = <0x0 0x8c000000 0x0 0x1000000>;
>> + };
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>
> Here have a question:
> In devcie tree binding file: Documentation/devicetree/bindings/arm/gic.txt,
> it only considers for maximum 8 cpus. So will we need change the
> binding file and also use GIC_CPU_MASK_SIMPLE(16) for 16 cores?
>
Looks like should updtate gic.txt and use the GIC_CPU_MASK_SIMPLE(16) for 16 cores.
Ding
>> + };
>> +
>> + pmu {
>> + compatible = "arm,armv8-pmuv3";
>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + };
>> +
>> + soc {
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + refclk200mhz: refclk200mhz {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <200000000>;
>> + };
>> +
>> + uart0: uart@80300000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x0 0x80300000 0x0 0x10000>;
>> + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&refclk200mhz>;
>> + clock-names = "apb_pclk";
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + status = "disabled";
>> + };
>> +
>> + uart1: uart@80310000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x0 0x80310000 0x0 0x10000>;
>> + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&refclk200mhz>;
>> + clock-names = "apb_pclk";
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + status = "disabled";
>> + };
>> + };
>> +};
>> --
>> 1.9.0
>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> .
>
On Mon, Aug 31, 2015 at 09:44:38PM +0800, Ding Tianhong wrote:
> On 2015/8/31 21:12, Leo Yan wrote:
> > On Sat, Aug 29, 2015 at 04:52:41PM +0800, Ding Tianhong wrote:
> >> Add initial dtsi file to support Hisilicon Hip05-D02 Board with
> >> support of CPUs in four clusters and each cluster has quard Cortex-A57.
> >>
> >> Also add dts file to support Hip05-D02 development board.
> >>
> >> Signed-off-by: Ding Tianhong <[email protected]>
> >> Signed-off-by: Kefeng Wang <[email protected]>
> >> ---
> >> arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
> >> arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++
> >> arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++
> >> 3 files changed, 308 insertions(+), 1 deletion(-)
> >> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
> >> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
> >> index fa81a6e..cd158b8 100644
> >> --- a/arch/arm64/boot/dts/hisilicon/Makefile
> >> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
> >> @@ -1,4 +1,4 @@
> >> -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
> >> +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
> >>
> >> always := $(dtb-y)
> >> subdir-y := $(dts-dirs)
> >> diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
> >> new file mode 100644
> >> index 0000000..ae34e25
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
> >> @@ -0,0 +1,36 @@
> >> +/**
> >> + * dts file for Hisilicon D02 Development Board
> >> + *
> >> + * Copyright (C) 2014,2015 Hisilicon Ltd.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * publishhed by the Free Software Foundation.
> >> + *
> >> + */
> >> +
> >> +/dts-v1/;
> >> +
> >> +#include "hip05.dtsi"
> >> +
> >> +/ {
> >> + model = "Hisilicon Hip05 D02 Development Board";
> >> + compatible = "hisilicon,hip05-d02";
> >> +
> >> + memory@00000000 {
> >> + device_type = "memory";
> >> + reg = <0x0 0x00000000 0x0 0x80000000>;
> >> + };
> >> +
> >> + aliases {
> >> + serial0 = &uart0;
> >> + };
> >> +
> >> + chosen {
> >> + stdout-path = "serial0:115200n8";
> >> + };
> >> +};
> >> +
> >> +&uart0 {
> >> + status = "ok";
> >> +};
> >> diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
> >> new file mode 100644
> >> index 0000000..da12d94
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
> >> @@ -0,0 +1,271 @@
> >> +/**
> >> + * dts file for Hisilicon D02 Development Board
> >> + *
> >> + * Copyright (C) 2014,2015 Hisilicon Ltd.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * publishhed by the Free Software Foundation.
> >> + *
> >> + */
> >> +
> >> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >> +
> >> +/ {
> >> + compatible = "hisilicon,hip05-d02";
> >> + interrupt-parent = <&gic>;
> >> + #address-cells = <2>;
> >> + #size-cells = <2>;
> >> +
> >> + psci {
> >> + compatible = "arm,psci-0.2";
> >> + method = "smc";
> >> + };
> >> +
> >> + cpus {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + cpu-map {
> >> + cluster0 {
> >> + core0 {
> >> + cpu = <&cpu0>;
> >> + };
> >> + core1 {
> >> + cpu = <&cpu1>;
> >> + };
> >> + core2 {
> >> + cpu = <&cpu2>;
> >> + };
> >> + core3 {
> >> + cpu = <&cpu3>;
> >> + };
> >> + };
> >> + cluster1 {
> >> + core0 {
> >> + cpu = <&cpu4>;
> >> + };
> >> + core1 {
> >> + cpu = <&cpu5>;
> >> + };
> >> + core2 {
> >> + cpu = <&cpu6>;
> >> + };
> >> + core3 {
> >> + cpu = <&cpu7>;
> >> + };
> >> + };
> >> + cluster2 {
> >> + core0 {
> >> + cpu = <&cpu8>;
> >> + };
> >> + core1 {
> >> + cpu = <&cpu9>;
> >> + };
> >> + core2 {
> >> + cpu = <&cpu10>;
> >> + };
> >> + core3 {
> >> + cpu = <&cpu11>;
> >> + };
> >> + };
> >> + cluster3 {
> >> + core0 {
> >> + cpu = <&cpu12>;
> >> + };
> >> + core1 {
> >> + cpu = <&cpu13>;
> >> + };
> >> + core2 {
> >> + cpu = <&cpu14>;
> >> + };
> >> + core3 {
> >> + cpu = <&cpu15>;
> >> + };
> >> + };
> >> + };
> >> +
> >> + cpu0: cpu@20000 {
> >> + device_type = "cpu";
> >> + compatible = "arm,armv8";
> >
> > Change to "arm,cortex-a57","arm,armv8"?
> >
>
> Ok，but I think should be "hisilicon,hip05","arm,armv8".
If the CPU is a starndard ARM core (such like CA53, CA57, etc), you
need directly use the CPU type which has been defined in:
Documentation/devicetree/bindings/arm/cpus.txt. So here hip05 is the
naming code for SoC? or for the CPU customized by Hisilicon?
[...]
Thanks,
Leo Yan
On 2015/8/31 22:40, Leo Yan wrote:
> On Mon, Aug 31, 2015 at 09:44:38PM +0800, Ding Tianhong wrote:
>> On 2015/8/31 21:12, Leo Yan wrote:
>>> On Sat, Aug 29, 2015 at 04:52:41PM +0800, Ding Tianhong wrote:
>>>> Add initial dtsi file to support Hisilicon Hip05-D02 Board with
>>>> support of CPUs in four clusters and each cluster has quard Cortex-A57.
>>>>
>>>> Also add dts file to support Hip05-D02 development board.
>>>>
>>>> Signed-off-by: Ding Tianhong <[email protected]>
>>>> Signed-off-by: Kefeng Wang <[email protected]>
>>>> ---
>>>> arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
>>>> arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++
>>>> arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++
>>>> 3 files changed, 308 insertions(+), 1 deletion(-)
>>>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>>>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
>>>> index fa81a6e..cd158b8 100644
>>>> --- a/arch/arm64/boot/dts/hisilicon/Makefile
>>>> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
>>>> @@ -1,4 +1,4 @@
>>>> -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
>>>> +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
>>>>
>>>> always := $(dtb-y)
>>>> subdir-y := $(dts-dirs)
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>>>> new file mode 100644
>>>> index 0000000..ae34e25
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>>>> @@ -0,0 +1,36 @@
>>>> +/**
>>>> + * dts file for Hisilicon D02 Development Board
>>>> + *
>>>> + * Copyright (C) 2014,2015 Hisilicon Ltd.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * publishhed by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "hip05.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "Hisilicon Hip05 D02 Development Board";
>>>> + compatible = "hisilicon,hip05-d02";
>>>> +
>>>> + memory@00000000 {
>>>> + device_type = "memory";
>>>> + reg = <0x0 0x00000000 0x0 0x80000000>;
>>>> + };
>>>> +
>>>> + aliases {
>>>> + serial0 = &uart0;
>>>> + };
>>>> +
>>>> + chosen {
>>>> + stdout-path = "serial0:115200n8";
>>>> + };
>>>> +};
>>>> +
>>>> +&uart0 {
>>>> + status = "ok";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>>> new file mode 100644
>>>> index 0000000..da12d94
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>>> @@ -0,0 +1,271 @@
>>>> +/**
>>>> + * dts file for Hisilicon D02 Development Board
>>>> + *
>>>> + * Copyright (C) 2014,2015 Hisilicon Ltd.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * publishhed by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +
>>>> +/ {
>>>> + compatible = "hisilicon,hip05-d02";
>>>> + interrupt-parent = <&gic>;
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> +
>>>> + psci {
>>>> + compatible = "arm,psci-0.2";
>>>> + method = "smc";
>>>> + };
>>>> +
>>>> + cpus {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + cpu-map {
>>>> + cluster0 {
>>>> + core0 {
>>>> + cpu = <&cpu0>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu1>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu2>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu3>;
>>>> + };
>>>> + };
>>>> + cluster1 {
>>>> + core0 {
>>>> + cpu = <&cpu4>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu5>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu6>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu7>;
>>>> + };
>>>> + };
>>>> + cluster2 {
>>>> + core0 {
>>>> + cpu = <&cpu8>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu9>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu10>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu11>;
>>>> + };
>>>> + };
>>>> + cluster3 {
>>>> + core0 {
>>>> + cpu = <&cpu12>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu13>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu14>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu15>;
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + cpu0: cpu@20000 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>
>>> Change to "arm,cortex-a57","arm,armv8"?
>>>
>>
>> Ok，but I think should be "hisilicon,hip05","arm,armv8".
>
> If the CPU is a starndard ARM core (such like CA53, CA57, etc), you
> need directly use the CPU type which has been defined in:
> Documentation/devicetree/bindings/arm/cpus.txt. So here hip05 is the
> naming code for SoC? or for the CPU customized by Hisilicon?
>
> [...]
Hip05 is the name for SoC.
>
> Thanks,
> Leo Yan
>
> .
>