If st->mclk is not NULL, then st->clock_sel is either AD7192_CLK_EXT_MCLK2
or AD7192_CLK_EXT_MCLK1_2.
So devm_clk_get_optional_enabled() can be used instead of hand writing it.
This saves some line of code.
Signed-off-by: Christophe JAILLET <[email protected]>
---
drivers/iio/adc/ad7192.c | 16 +---------------
1 file changed, 1 insertion(+), 15 deletions(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 8685e0b58a83..5dcb257ad754 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -972,11 +972,6 @@ static void ad7192_reg_disable(void *reg)
regulator_disable(reg);
}
-static void ad7192_clk_disable(void *clk)
-{
- clk_disable_unprepare(clk);
-}
-
static int ad7192_probe(struct spi_device *spi)
{
struct ad7192_state *st;
@@ -1044,7 +1039,7 @@ static int ad7192_probe(struct spi_device *spi)
st->fclk = AD7192_INT_FREQ_MHZ;
- st->mclk = devm_clk_get_optional(&spi->dev, "mclk");
+ st->mclk = devm_clk_get_optional_enabled(&spi->dev, "mclk");
if (IS_ERR(st->mclk))
return PTR_ERR(st->mclk);
@@ -1052,15 +1047,6 @@ static int ad7192_probe(struct spi_device *spi)
if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
st->clock_sel == AD7192_CLK_EXT_MCLK2) {
- ret = clk_prepare_enable(st->mclk);
- if (ret < 0)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, ad7192_clk_disable,
- st->mclk);
- if (ret)
- return ret;
-
st->fclk = clk_get_rate(st->mclk);
if (!ad7192_valid_external_frequency(st->fclk)) {
dev_err(&spi->dev,
--
2.34.1
On Wed, 2023-06-14 at 22:26 +0200, Christophe JAILLET wrote:
> If st->mclk is not NULL, then st->clock_sel is either AD7192_CLK_EXT_MCLK2
> or AD7192_CLK_EXT_MCLK1_2.
>
> So devm_clk_get_optional_enabled() can be used instead of hand writing it.
> This saves some line of code.
>
> Signed-off-by: Christophe JAILLET <[email protected]>
> ---
Reviewed-by: Nuno Sa <[email protected]>
> drivers/iio/adc/ad7192.c | 16 +---------------
> 1 file changed, 1 insertion(+), 15 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> index 8685e0b58a83..5dcb257ad754 100644
> --- a/drivers/iio/adc/ad7192.c
> +++ b/drivers/iio/adc/ad7192.c
> @@ -972,11 +972,6 @@ static void ad7192_reg_disable(void *reg)
> regulator_disable(reg);
> }
>
> -static void ad7192_clk_disable(void *clk)
> -{
> - clk_disable_unprepare(clk);
> -}
> -
> static int ad7192_probe(struct spi_device *spi)
> {
> struct ad7192_state *st;
> @@ -1044,7 +1039,7 @@ static int ad7192_probe(struct spi_device *spi)
>
> st->fclk = AD7192_INT_FREQ_MHZ;
>
> - st->mclk = devm_clk_get_optional(&spi->dev, "mclk");
> + st->mclk = devm_clk_get_optional_enabled(&spi->dev, "mclk");
> if (IS_ERR(st->mclk))
> return PTR_ERR(st->mclk);
>
> @@ -1052,15 +1047,6 @@ static int ad7192_probe(struct spi_device *spi)
>
> if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
> st->clock_sel == AD7192_CLK_EXT_MCLK2) {
> - ret = clk_prepare_enable(st->mclk);
> - if (ret < 0)
> - return ret;
> -
> - ret = devm_add_action_or_reset(&spi->dev, ad7192_clk_disable,
> - st->mclk);
> - if (ret)
> - return ret;
> -
> st->fclk = clk_get_rate(st->mclk);
> if (!ad7192_valid_external_frequency(st->fclk)) {
> dev_err(&spi->dev,
On Thu, 15 Jun 2023 14:12:57 +0200
Nuno Sá <[email protected]> wrote:
> On Wed, 2023-06-14 at 22:26 +0200, Christophe JAILLET wrote:
> > If st->mclk is not NULL, then st->clock_sel is either AD7192_CLK_EXT_MCLK2
> > or AD7192_CLK_EXT_MCLK1_2.
> >
> > So devm_clk_get_optional_enabled() can be used instead of hand writing it.
> > This saves some line of code.
> >
> > Signed-off-by: Christophe JAILLET <[email protected]>
> > ---
>
> Reviewed-by: Nuno Sa <[email protected]>
Applied to the togreg branch of iio.git but as we are approaching the merge
window I'll be rebasing that on 6.5-rc1 when available.
In meantime pushed out as testing to let 0-day poke at it.
Thanks,
Jonathan
>
> > drivers/iio/adc/ad7192.c | 16 +---------------
> > 1 file changed, 1 insertion(+), 15 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> > index 8685e0b58a83..5dcb257ad754 100644
> > --- a/drivers/iio/adc/ad7192.c
> > +++ b/drivers/iio/adc/ad7192.c
> > @@ -972,11 +972,6 @@ static void ad7192_reg_disable(void *reg)
> > regulator_disable(reg);
> > }
> >
> > -static void ad7192_clk_disable(void *clk)
> > -{
> > - clk_disable_unprepare(clk);
> > -}
> > -
> > static int ad7192_probe(struct spi_device *spi)
> > {
> > struct ad7192_state *st;
> > @@ -1044,7 +1039,7 @@ static int ad7192_probe(struct spi_device *spi)
> >
> > st->fclk = AD7192_INT_FREQ_MHZ;
> >
> > - st->mclk = devm_clk_get_optional(&spi->dev, "mclk");
> > + st->mclk = devm_clk_get_optional_enabled(&spi->dev, "mclk");
> > if (IS_ERR(st->mclk))
> > return PTR_ERR(st->mclk);
> >
> > @@ -1052,15 +1047,6 @@ static int ad7192_probe(struct spi_device *spi)
> >
> > if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
> > st->clock_sel == AD7192_CLK_EXT_MCLK2) {
> > - ret = clk_prepare_enable(st->mclk);
> > - if (ret < 0)
> > - return ret;
> > -
> > - ret = devm_add_action_or_reset(&spi->dev, ad7192_clk_disable,
> > - st->mclk);
> > - if (ret)
> > - return ret;
> > -
> > st->fclk = clk_get_rate(st->mclk);
> > if (!ad7192_valid_external_frequency(st->fclk)) {
> > dev_err(&spi->dev,
>