The elm and hana devices uses an Embedded DisplayPort (eDP) as interface
for its panel, so the DDC channel specified in the binding is useless.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index a5a12b2599a4..1fe5dac24ba1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -86,7 +86,6 @@ volume_up {
panel: panel {
compatible = "lg,lp120up1";
power-supply = <&panel_fixed_3v3>;
- ddc-i2c-bus = <&i2c0>;
backlight = <&backlight>;
port {
--
2.28.0
Hi Matthias,
On 26/8/20 11:02, Enric Balletbo i Serra wrote:
> The elm and hana devices uses an Embedded DisplayPort (eDP) as interface
> for its panel, so the DDC channel specified in the binding is useless.
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
A gentle ping on this patch.
Thanks,
Enric
> ---
>
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index a5a12b2599a4..1fe5dac24ba1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -86,7 +86,6 @@ volume_up {
> panel: panel {
> compatible = "lg,lp120up1";
> power-supply = <&panel_fixed_3v3>;
> - ddc-i2c-bus = <&i2c0>;
> backlight = <&backlight>;
>
> port {
>
On Wed, 26 Aug 2020 11:02:17 +0200
Enric Balletbo i Serra <[email protected]> wrote:
> The elm and hana devices uses an Embedded DisplayPort (eDP) as
> interface for its panel, so the DDC channel specified in the binding
> is useless.
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
>
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index
> a5a12b2599a4..1fe5dac24ba1 100644 ---
> a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++
> b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -86,7 +86,6 @@
> volume_up { panel: panel {
> compatible = "lg,lp120up1";
> power-supply = <&panel_fixed_3v3>;
> - ddc-i2c-bus = <&i2c0>;
> backlight = <&backlight>;
>
> port {
Tested-by: Bilal Wasim <[email protected]>
Thanks,
Bilal
On 26/08/2020 11:02, Enric Balletbo i Serra wrote:
> The elm and hana devices uses an Embedded DisplayPort (eDP) as interface
> for its panel, so the DDC channel specified in the binding is useless.
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
Applied to v5.10-tmp/dts64 which will be rebased on v5.10-rc1 and called
v5.10-next/dts64
Thanks,
Matthias
>
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index a5a12b2599a4..1fe5dac24ba1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -86,7 +86,6 @@ volume_up {
> panel: panel {
> compatible = "lg,lp120up1";
> power-supply = <&panel_fixed_3v3>;
> - ddc-i2c-bus = <&i2c0>;
> backlight = <&backlight>;
>
> port {
>