2015-11-16 10:47:56

by Jisheng Zhang

Subject: [PATCH RESEND] arm: dts: berlin2q-marvell-dmp: remove broken-cd from eMMC node

The eMMC is non-removable so is marked with the non-removable DT
property to avoid having to redetect it after a suspend/resume.

But it also has the broken-cd property which is wrong since only
one of the DT properties for card detection should be used

Signed-off-by: Jisheng Zhang <[email protected]>
---
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index da28c97..cdcf89b 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -94,7 +94,6 @@
};

&sdhci2 {
- broken-cd;
bus-width = <8>;
non-removable;
status = "okay";
--
2.6.2

2015-11-19 20:21:11

by Sebastian Hesselbarth

Subject: Re: [PATCH RESEND] arm: dts: berlin2q-marvell-dmp: remove broken-cd from eMMC node

On 16.11.2015 11:43, Jisheng Zhang wrote:
> The eMMC is non-removable so is marked with the non-removable DT
> property to avoid having to redetect it after a suspend/resume.
>
> But it also has the broken-cd property which is wrong since only
> one of the DT properties for card detection should be used
>
> Signed-off-by: Jisheng Zhang <[email protected]>

Applied to berlin64/dt.

Thanks!

> ---
> arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
> index da28c97..cdcf89b 100644
> --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
> +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
> @@ -94,7 +94,6 @@
> };
>
> &sdhci2 {
> - broken-cd;
> bus-width = <8>;
> non-removable;
> status = "okay";
>