2015-11-30 13:46:18

by Jisheng Zhang

Subject: [PATCH] arm64: dts: berlin4ct: support cpuidle-dt

This patch adds an idle-states node to describe the berlin4ct idle
states and also adds references to the idle-states node in all CPU
nodes. After this patch cpuidle is enabled.

Signed-off-by: Jisheng Zhang <[email protected]>
---
arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index 39d0676..3649cea 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -69,6 +69,7 @@
device_type = "cpu";
reg = <0x0>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};

cpu1: cpu@1 {
@@ -76,6 +77,7 @@
device_type = "cpu";
reg = <0x1>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};

cpu2: cpu@2 {
@@ -83,6 +85,7 @@
device_type = "cpu";
reg = <0x2>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};

cpu3: cpu@3 {
@@ -90,6 +93,19 @@
device_type = "cpu";
reg = <0x3>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <75>;
+ exit-latency-us = <155>;
+ min-residency-us = <1000>;
+ };
};
};

--
2.6.2

2015-12-02 10:30:52

by Lorenzo Pieralisi

Subject: Re: [PATCH] arm64: dts: berlin4ct: support cpuidle-dt

On Mon, Nov 30, 2015 at 09:41:58PM +0800, Jisheng Zhang wrote:
> This patch adds an idle-states node to describe the berlin4ct idle
> states and also adds references to the idle-states node in all CPU
> nodes. After this patch cpuidle is enabled.
>
> Signed-off-by: Jisheng Zhang <[email protected]>
> ---
> arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)

Acked-by: Lorenzo Pieralisi <[email protected]>

>
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index 39d0676..3649cea 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> @@ -69,6 +69,7 @@
> device_type = "cpu";
> reg = <0x0>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu1: cpu@1 {
> @@ -76,6 +77,7 @@
> device_type = "cpu";
> reg = <0x1>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu2: cpu@2 {
> @@ -83,6 +85,7 @@
> device_type = "cpu";
> reg = <0x2>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu3: cpu@3 {
> @@ -90,6 +93,19 @@
> device_type = "cpu";
> reg = <0x3>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + idle-states {
> + entry-method = "psci";
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <75>;
> + exit-latency-us = <155>;
> + min-residency-us = <1000>;
> + };
> };
> };
>
> --
> 2.6.2
>

2015-12-06 09:27:40

by Sebastian Hesselbarth

Subject: Re: [PATCH] arm64: dts: berlin4ct: support cpuidle-dt

On 30.11.2015 14:41, Jisheng Zhang wrote:
> This patch adds an idle-states node to describe the berlin4ct idle
> states and also adds references to the idle-states node in all CPU
> nodes. After this patch cpuidle is enabled.
>
> Signed-off-by: Jisheng Zhang <[email protected]>

Applied to berlin64/dt with Lorenzo's Ack.

Thanks!

Sebastian

> ---
> arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index 39d0676..3649cea 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> @@ -69,6 +69,7 @@
> device_type = "cpu";
> reg = <0x0>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu1: cpu@1 {
> @@ -76,6 +77,7 @@
> device_type = "cpu";
> reg = <0x1>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu2: cpu@2 {
> @@ -83,6 +85,7 @@
> device_type = "cpu";
> reg = <0x2>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> };
>
> cpu3: cpu@3 {
> @@ -90,6 +93,19 @@
> device_type = "cpu";
> reg = <0x3>;
> enable-method = "psci";
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + idle-states {
> + entry-method = "psci";
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <75>;
> + exit-latency-us = <155>;
> + min-residency-us = <1000>;
> + };
> };
> };
>
>