Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/pm6150l.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index 6a7fe1e59f15..d13a1ab7c20b 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -121,8 +121,9 @@ pm6150l_flash: led-controller@d300 {
pm6150l_wled: leds@d800 {
compatible = "qcom,pm6150l-wled";
reg = <0xd800>, <0xd900>;
- interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "ovp";
+ interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ovp", "short";
label = "backlight";
status = "disabled";
--
2.41.0
On 26.06.2023 22:17, Luca Weiss wrote:
> On Montag, 26. Juni 2023 22:00:25 CEST Konrad Dybcio wrote:
>> Add the missing short interrupt. This fixes the schema warning:
>>
>> wled@d800: interrupt-names: ['ovp'] is too short
>>
>> Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
>> Signed-off-by: Konrad Dybcio <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/pm6150l.dtsi | 5 +++--
>> 1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
>> b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 6a7fe1e59f15..d13a1ab7c20b
>> 100644
>> --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
>> @@ -121,8 +121,9 @@ pm6150l_flash: led-controller@d300 {
>> pm6150l_wled: leds@d800 {
>> compatible = "qcom,pm6150l-wled";
>> reg = <0xd800>, <0xd900>;
>> - interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
>> - interrupt-names = "ovp";
>> + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
>> + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "ovp", "short";
>
> Are you sure this interrupt really exists? It's not a thing used downstream at
> least:
> https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/pm6150l.dtsi#293
>
Confirmed with a reliable source.
Konrad
> Regards
> Luca
>
>> label = "backlight";
>>
>> status = "disabled";
>
>
>
>
On Montag, 26. Juni 2023 22:00:25 CEST Konrad Dybcio wrote:
> Add the missing short interrupt. This fixes the schema warning:
>
> wled@d800: interrupt-names: ['ovp'] is too short
>
> Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/pm6150l.dtsi | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 6a7fe1e59f15..d13a1ab7c20b
> 100644
> --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> @@ -121,8 +121,9 @@ pm6150l_flash: led-controller@d300 {
> pm6150l_wled: leds@d800 {
> compatible = "qcom,pm6150l-wled";
> reg = <0xd800>, <0xd900>;
> - interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "ovp";
> + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
> + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "ovp", "short";
Are you sure this interrupt really exists? It's not a thing used downstream at
least:
https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/pm6150l.dtsi#293
Regards
Luca
> label = "backlight";
>
> status = "disabled";
On Montag, 26. Juni 2023 22:18:11 CEST Konrad Dybcio wrote:
> On 26.06.2023 22:17, Luca Weiss wrote:
> > On Montag, 26. Juni 2023 22:00:25 CEST Konrad Dybcio wrote:
> >> Add the missing short interrupt. This fixes the schema warning:
> >>
> >> wled@d800: interrupt-names: ['ovp'] is too short
> >>
> >> Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
> >> Signed-off-by: Konrad Dybcio <[email protected]>
> >> ---
> >>
> >> arch/arm64/boot/dts/qcom/pm6150l.dtsi | 5 +++--
> >> 1 file changed, 3 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> >> b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index 6a7fe1e59f15..d13a1ab7c20b
> >> 100644
> >> --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
> >> @@ -121,8 +121,9 @@ pm6150l_flash: led-controller@d300 {
> >>
> >> pm6150l_wled: leds@d800 {
> >>
> >> compatible = "qcom,pm6150l-wled";
> >> reg = <0xd800>, <0xd900>;
> >>
> >> - interrupts = <0x5 0xd8 0x1
IRQ_TYPE_EDGE_RISING>;
> >> - interrupt-names = "ovp";
> >> + interrupts = <0x5 0xd8 0x1
IRQ_TYPE_EDGE_RISING>,
> >> + <0x5 0xd8 0x2
IRQ_TYPE_EDGE_RISING>;
> >> + interrupt-names = "ovp", "short";
> >
> > Are you sure this interrupt really exists? It's not a thing used
> > downstream at least:
> > https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/
> > android-msm-bramble-4.19-android11-qpr1/qcom/pm6150l.dtsi#293
> Confirmed with a reliable source.
Fine by me then.
Reviewed-by: Luca Weiss <[email protected]>
>
> Konrad
>
> > Regards
> > Luca
> >
> >> label = "backlight";
> >>
> >> status = "disabled";