2016-03-01 17:40:15

by Maxime Coquelin

[permalink] [raw]
Subject: Re: [PATCH v2 0/4] Add Ethernet support on STM32F429

Hi Alex,

On 02/23/2016 04:10 PM, Alexandre TORGUE wrote:
> STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
> This series:
> -enhance current stmmac driver to control it (code already
> available) and adds basic glue for STM32F429 chip.
> -Enable basic Net config in kernel.
>
> Note that DT patches are not present because STM32 pinctrl code is not
> yet avalaible.
>
> Changes since v1:
> -Fix Kbuild issue in Kconfig.
> -Remove init/exit callbacks. Suspend/Resume and remove driver is no more
> driven in stmmac_pltfr but directly in dwmac-stm32 glue driver.
> -Take into account Joachim review.
>
> Regards.
>
> Alexandre.
>
> Alexandre TORGUE (4):
> net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
> Documentation: Bindings: Add STM32 DWMAC glue
> net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
> ARM: STM32: Enable Ethernet in stm32_defconfig
>
> .../devicetree/bindings/net/stm32-dwmac.txt | 41 ++++
> arch/arm/configs/stm32_defconfig | 9 +
> drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 208 +++++++++++++++++++++
> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
> 6 files changed, 272 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
>

You can add my:
Tested-by: Maxime Coquelin <[email protected]>

Thanks!
Maxime