This driver parse the reboot commands like "reboot loader"
and "reboot recovery" to get a boot mode described in the
device tree , then call the corresponding write interfae
to store the boot mode in some place like special register
or ram , which can be read by the bootloader after system
reboot.
This is commonly done on Android based devices, in order to
reboot the device into fastboot or recovery mode.
Changes in v4:
- remove mode-maskrom
- rename mode-fastboot to mode-bootloader to keep compatible with the exiting Android device
- make this driver depends on OF to avoid kbuild test error
Changes in v3:
- descirbe all reboot mode as properity instead of subnode
- scan multi properities
- add mask value for some platform which only use some bits of the register
to store boot mode magic value
- descirbe all reboot mode as property instead of subnode
- add rk3036 support
- descirbe all reboot mode as properity instead of subnode
Changes in v2:
- move to dir drivers/power/reset/
- make syscon-reboot-mode a generic driver
- make this node as a subnode of PMU
- make this node as a subnode of pmugrf
Changes in v1:
- fix the embarrassed compile warning
- correct the maskrom magic number
- check for the normal reboot
- correct the maskrom magic number
- use macro defined in rockchip_boot-mode.h for reboot-mode DT node
Andy Yan (4):
dt-bindings: power: reset: add document for reboot-mode driver
power: reset: add reboot mode driver
ARM: dts: rockchip: add syscon-reboot-mode DT node
ARM64: dts: rockchip: add syscon-reboot-mode DT node
.../bindings/power/reset/reboot-mode.txt | 24 +++++
.../bindings/power/reset/syscon-reboot-mode.txt | 35 +++++++
arch/arm/boot/dts/rk3036.dtsi | 11 ++-
arch/arm/boot/dts/rk3288.dtsi | 10 ++
arch/arm/boot/dts/rk3xxx.dtsi | 12 ++-
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 13 ++-
drivers/power/reset/Kconfig | 16 ++++
drivers/power/reset/Makefile | 2 +
drivers/power/reset/reboot-mode.c | 105 +++++++++++++++++++++
drivers/power/reset/reboot-mode.h | 6 ++
drivers/power/reset/syscon-reboot-mode.c | 64 +++++++++++++
include/dt-bindings/soc/rockchip_boot-mode.h | 30 ++++++
12 files changed, 325 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
create mode 100644 drivers/power/reset/reboot-mode.c
create mode 100644 drivers/power/reset/reboot-mode.h
create mode 100644 drivers/power/reset/syscon-reboot-mode.c
create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
--
1.9.1
add device tree bindings document for reboot-mode driver
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v4:
- remove mode-maskrom
- rename mode-fastboot to mode-bootloader to keep compatible with the exiting Android device
Changes in v3:
- descirbe all reboot mode as properity instead of subnode
Changes in v2: None
Changes in v1: None
.../bindings/power/reset/reboot-mode.txt | 24 +++++++++++++++
.../bindings/power/reset/syscon-reboot-mode.txt | 35 ++++++++++++++++++++++
2 files changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
new file mode 100644
index 0000000..f131a11
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.txt
@@ -0,0 +1,24 @@
+Generic reboot mode core map driver
+
+This driver get reboot mode arguments and call the write
+interface to stores the magic value in special register
+or ram . Then the bootloader can read it and take different
+action according the argument stored.
+
+All mode properties are vendor specific, it is a indication to tell
+the bootloder what to do when the system reboot, and should be named
+as mode-xxx = <magic> (xxx is mode name).
+
+- mode-normal: Normal reboot mode, system reboot with command "reboot".
+- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+ usually used in development.
+
+Example:
+ reboot-mode {
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ }
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
new file mode 100644
index 0000000..1908e54
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
@@ -0,0 +1,35 @@
+SYSCON reboot mode driver
+
+This driver get reboot mode magic value form reboot-mode driver
+and stores it in a SYSCON mapped register. Then the bootloader
+can read it and take different action according to the magic
+value stored.
+
+This DT node should be represented as a sub-node of a "syscon", "simple-mfd"
+node.
+
+Required properties:
+- compatible: should be "syscon-reboot-mode"
+- offset: offset in the register map for the storage register (in bytes)
+
+Optional properity:
+- mask: the mask bits of the mode magic value, default set to 0xffffffff if missing.
+
+The rest of the properties should follow the generic reboot-mode discription
+found in reboot-mode.txt
+
+Example:
+ pmu: pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
+ reg = <0x20004000 0x100>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x40>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-fastboot = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+
+ };
+ };
--
1.9.1
This driver parse the reboot commands like "reboot loader"
and "reboot recovery" to get a boot mode described in the
device tree , then call the write interfae to store the boot
mode in some place like special register or sram , which can
be read by the bootloader after system reboot, then the bootloader
can take different action according to the mode stored.
This is commonly used on Android based devices, in order to
reboot the device into fastboot or recovery mode.
Reviewed-by: Matthias Brugger <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v4:
- make this driver depends on OF to avoid kbuild test error
Changes in v3:
- scan multi properities
- add mask value for some platform which only use some bits of the register
to store boot mode magic value
Changes in v2:
- move to dir drivers/power/reset/
- make syscon-reboot-mode a generic driver
Changes in v1:
- fix the embarrassed compile warning
- correct the maskrom magic number
- check for the normal reboot
drivers/power/reset/Kconfig | 16 +++++
drivers/power/reset/Makefile | 2 +
drivers/power/reset/reboot-mode.c | 105 +++++++++++++++++++++++++++++++
drivers/power/reset/reboot-mode.h | 6 ++
drivers/power/reset/syscon-reboot-mode.c | 64 +++++++++++++++++++
5 files changed, 193 insertions(+)
create mode 100644 drivers/power/reset/reboot-mode.c
create mode 100644 drivers/power/reset/reboot-mode.h
create mode 100644 drivers/power/reset/syscon-reboot-mode.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 1131cf7..2454af9 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -173,5 +173,21 @@ config POWER_RESET_ZX
help
Reboot support for ZTE SoCs.
+config REBOOT_MODE
+ tristate
+ help
+ This driver will help to pass the system reboot mode
+ to bootloader
+
+config SYSCON_REBOOT_MODE
+ bool "Generic SYSCON regmap reboot mode driver"
+ depends on OF
+ select REBOOT_MODE
+ help
+ Say y here will enable reboot mode driver. This will
+ get reboot mode arguments and store it in SYSCON mapped
+ register, then the bootloader can read it to take different
+ action according to the mode.
+
endif
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 096fa67..a63865b 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -20,3 +20,5 @@ obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
+obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
+obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
diff --git a/drivers/power/reset/reboot-mode.c b/drivers/power/reset/reboot-mode.c
new file mode 100644
index 0000000..69ba640
--- /dev/null
+++ b/drivers/power/reset/reboot-mode.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/reboot.h>
+#include "reboot-mode.h"
+
+#define PREFIX "mode-"
+
+struct mode_info {
+ char mode[32];
+ int magic;
+ struct list_head list;
+};
+
+struct reboot_mode_driver {
+ struct list_head head;
+ int (*write)(int magic);
+ struct notifier_block reboot_notifier;
+};
+
+static int get_reboot_mode_magic(struct reboot_mode_driver *reboot,
+ const char *cmd)
+{
+ const char *normal = "normal";
+ int magic = 0;
+ struct mode_info *info;
+
+ if (!cmd)
+ cmd = normal;
+
+ list_for_each_entry(info, &reboot->head, list) {
+ if (!strcmp(info->mode, cmd)) {
+ magic = info->magic;
+ break;
+ }
+ }
+
+ return magic;
+}
+
+static int reboot_mode_notify(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct reboot_mode_driver *reboot;
+ int magic;
+
+ reboot = container_of(this, struct reboot_mode_driver, reboot_notifier);
+ magic = get_reboot_mode_magic(reboot, cmd);
+ if (magic)
+ reboot->write(magic);
+
+ return NOTIFY_DONE;
+}
+
+int reboot_mode_register(struct device *dev, int (*write)(int))
+{
+ struct reboot_mode_driver *reboot;
+ struct mode_info *info;
+ struct property *prop;
+ size_t len = strlen(PREFIX);
+ int ret;
+
+ reboot = devm_kzalloc(dev, sizeof(*reboot), GFP_KERNEL);
+ if (!reboot)
+ return -ENOMEM;
+
+ reboot->write = write;
+ INIT_LIST_HEAD(&reboot->head);
+ for_each_property_of_node(dev->of_node, prop) {
+ if (len > strlen(prop->name) || strncmp(prop->name, PREFIX, len))
+ continue;
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ strcpy(info->mode, prop->name + len);
+ if (of_property_read_u32(dev->of_node, prop->name, &info->magic)) {
+ dev_err(dev, "reboot mode %s without magic number\n",
+ info->mode);
+ devm_kfree(dev, info);
+ continue;
+ }
+ list_add_tail(&info->list, &reboot->head);
+ }
+ reboot->reboot_notifier.notifier_call = reboot_mode_notify;
+ ret = register_reboot_notifier(&reboot->reboot_notifier);
+ if (ret)
+ dev_err(dev, "can't register reboot notifier\n");
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(reboot_mode_register);
+
+MODULE_AUTHOR("Andy Yan <[email protected]");
+MODULE_DESCRIPTION("System reboot mode driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/reboot-mode.h b/drivers/power/reset/reboot-mode.h
new file mode 100644
index 0000000..44ed34f
--- /dev/null
+++ b/drivers/power/reset/reboot-mode.h
@@ -0,0 +1,6 @@
+#ifndef __REBOOT_MODE_H__
+#define __REBOOT_MODE_H__
+
+int reboot_mode_register(struct device *dev, int (*write)(int));
+
+#endif
diff --git a/drivers/power/reset/syscon-reboot-mode.c b/drivers/power/reset/syscon-reboot-mode.c
new file mode 100644
index 0000000..8571df3
--- /dev/null
+++ b/drivers/power/reset/syscon-reboot-mode.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include "reboot-mode.h"
+
+static struct regmap *map;
+static u32 offset;
+static u32 mask = 0xffffffff;
+
+static int syscon_reboot_mode_write(int magic)
+{
+ regmap_update_bits(map, offset, mask, magic);
+
+ return 0;
+}
+
+static int syscon_reboot_mode_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ map = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+ if (of_property_read_u32(pdev->dev.of_node, "offset", &offset))
+ return -EINVAL;
+ of_property_read_u32(pdev->dev.of_node, "mask", &mask);
+ ret = reboot_mode_register(&pdev->dev, syscon_reboot_mode_write);
+ if (ret)
+ dev_err(&pdev->dev, "can't register reboot mode\n");
+
+ return ret;
+}
+
+static const struct of_device_id syscon_reboot_mode_of_match[] = {
+ { .compatible = "syscon-reboot-mode" },
+ {}
+};
+
+static struct platform_driver syscon_reboot_mode_driver = {
+ .probe = syscon_reboot_mode_probe,
+ .driver = {
+ .name = "syscon-reboot-mode",
+ .of_match_table = syscon_reboot_mode_of_match,
+ },
+};
+module_platform_driver(syscon_reboot_mode_driver);
+
+MODULE_AUTHOR("Andy Yan <[email protected]");
+MODULE_DESCRIPTION("SYSCON reboot mode driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
Rockchip platform use a SYSCON mapped register store
the reboot mode magic value for bootloader to use when
system reboot. So add syscon-reboot-mode driver DT node
for rk3xxx,rk3036, rk3288 platform
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v4: None
Changes in v3:
- descirbe all reboot mode as property instead of subnode
- add rk3036 support
Changes in v2:
- make this node as a subnode of PMU
Changes in v1:
- correct the maskrom magic number
- use macro defined in rockchip_boot-mode.h for reboot-mode DT node
arch/arm/boot/dts/rk3036.dtsi | 11 +++++++++-
arch/arm/boot/dts/rk3288.dtsi | 10 ++++++++++
arch/arm/boot/dts/rk3xxx.dtsi | 12 ++++++++++-
include/dt-bindings/soc/rockchip_boot-mode.h | 30 ++++++++++++++++++++++++++++
4 files changed, 61 insertions(+), 2 deletions(-)
create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..a4a1773 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -261,8 +262,16 @@
};
grf: syscon@20008000 {
- compatible = "rockchip,rk3036-grf", "syscon";
+ compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
reg = <0x20008000 0x1000>;
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x1d8>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ };
};
acodec: acodec-ana@20030000 {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 8ac49f3..977b188 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -713,6 +714,15 @@
clocks = <&cru ACLK_GPU>;
};
};
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x94>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ };
};
sgrf: syscon@ff740000 {
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 99eeea7..b00d94c 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -43,6 +43,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include "skeleton.dtsi"
/ {
@@ -243,8 +244,17 @@
};
pmu: pmu@20004000 {
- compatible = "rockchip,rk3066-pmu", "syscon";
+ compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
reg = <0x20004000 0x100>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x40>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+ };
};
grf: grf@20008000 {
diff --git a/include/dt-bindings/soc/rockchip_boot-mode.h b/include/dt-bindings/soc/rockchip_boot-mode.h
new file mode 100644
index 0000000..eedf113
--- /dev/null
+++ b/include/dt-bindings/soc/rockchip_boot-mode.h
@@ -0,0 +1,30 @@
+#ifndef __ROCKCHIP_BOOT_MODE_H
+#define __ROCKCHIP_BOOT_MODE_H
+
+/*high 24 bits is tag, low 8 bits is type*/
+#define REBOOT_FLAG 0x5242C300
+/* normal boot */
+#define BOOT_NORMAL (REBOOT_FLAG + 0)
+/* enter loader rockusb mode */
+#define BOOT_LOADER (REBOOT_FLAG + 1)
+/* enter maskrom rockusb mode */
+#define BOOT_MASKROM (0xEF08A53C)
+/* enter recovery */
+#define BOOT_RECOVERY (REBOOT_FLAG + 3)
+/* do not enter recover */
+#define BOOT_NORECOVER (REBOOT_FLAG + 4)
+/* boot second OS*/
+#define BOOT_SECONDOS (REBOOT_FLAG + 5)
+/* enter recover and wipe data. */
+#define BOOT_WIPEDATA (REBOOT_FLAG + 6)
+/* enter recover and wipe all data. */
+#define BOOT_WIPEALL (REBOOT_FLAG + 7)
+/* check firmware img with backup part*/
+#define BOOT_CHECKIMG (REBOOT_FLAG + 8)
+ /* enter fast boot mode */
+#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
+#define BOOT_SECUREBOOT_DISABLE (REBOOT_FLAG + 10)
+/* enter charge mode */
+#define BOOT_CHARGING (REBOOT_FLAG + 11)
+
+#endif
--
1.9.1
Add syscon-reboot-mode driver DT node for rk3368 platform
Signed-off-by: Andy Yan <[email protected]>
---
Changes in v4: None
Changes in v3:
- descirbe all reboot mode as properity instead of subnode
Changes in v2:
- make this node as a subnode of pmugrf
Changes in v1: None
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 122777b..7a65ebb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip_boot-mode.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -554,8 +555,18 @@
};
pmugrf: syscon@ff738000 {
- compatible = "rockchip,rk3368-pmugrf", "syscon";
+ compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff738000 0x0 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x200>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_LOADER>;
+
+ };
};
cru: clock-controller@ff760000 {
--
1.9.1
On Tue, Mar 1, 2016 at 4:12 AM, Andy Yan <[email protected]> wrote:
> This driver parse the reboot commands like "reboot loader"
> and "reboot recovery" to get a boot mode described in the
> device tree , then call the write interfae to store the boot
> mode in some place like special register or sram , which can
> be read by the bootloader after system reboot, then the bootloader
> can take different action according to the mode stored.
>
> This is commonly used on Android based devices, in order to
> reboot the device into fastboot or recovery mode.
>
> Reviewed-by: Matthias Brugger <[email protected]>
> Reviewed-by: Moritz Fischer <[email protected]>
> Signed-off-by: Andy Yan <[email protected]>
Thanks Andy for your persistence pushing this!
This patch works well on my nexus7.
Tested-by: John Stultz <[email protected]>
Acked-by: John Stultz <[email protected]>
thanks
-john
Hi Andy,
This series patches ware verified on my github with RK3368 evb and
RK30236 board.
https://github.com/Caesar-github/rockchip/tree/for-reboot-mode-tests
在 2016年03月01日 20:09, Andy Yan 写道:
> This driver parse the reboot commands like "reboot loader"
> and "reboot recovery" to get a boot mode described in the
> device tree , then call the corresponding write interfae
> to store the boot mode in some place like special register
> or ram , which can be read by the bootloader after system
> reboot.
>
> This is commonly done on Android based devices, in order to
> reboot the device into fastboot or recovery mode.
>
>
> Changes in v4:
> - remove mode-maskrom
> - rename mode-fastboot to mode-bootloader to keep compatible with the exiting Android device
> - make this driver depends on OF to avoid kbuild test error
>
> Changes in v3:
> - descirbe all reboot mode as properity instead of subnode
> - scan multi properities
> - add mask value for some platform which only use some bits of the register
> to store boot mode magic value
> - descirbe all reboot mode as property instead of subnode
> - add rk3036 support
> - descirbe all reboot mode as properity instead of subnode
>
> Changes in v2:
> - move to dir drivers/power/reset/
> - make syscon-reboot-mode a generic driver
> - make this node as a subnode of PMU
> - make this node as a subnode of pmugrf
>
> Changes in v1:
> - fix the embarrassed compile warning
> - correct the maskrom magic number
> - check for the normal reboot
> - correct the maskrom magic number
> - use macro defined in rockchip_boot-mode.h for reboot-mode DT node
>
> Andy Yan (4):
> dt-bindings: power: reset: add document for reboot-mode driver
> power: reset: add reboot mode driver
> ARM: dts: rockchip: add syscon-reboot-mode DT node
> ARM64: dts: rockchip: add syscon-reboot-mode DT node
Tested-by: Caesar Wang <[email protected]>
>
> .../bindings/power/reset/reboot-mode.txt | 24 +++++
> .../bindings/power/reset/syscon-reboot-mode.txt | 35 +++++++
> arch/arm/boot/dts/rk3036.dtsi | 11 ++-
> arch/arm/boot/dts/rk3288.dtsi | 10 ++
> arch/arm/boot/dts/rk3xxx.dtsi | 12 ++-
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 13 ++-
> drivers/power/reset/Kconfig | 16 ++++
> drivers/power/reset/Makefile | 2 +
> drivers/power/reset/reboot-mode.c | 105 +++++++++++++++++++++
> drivers/power/reset/reboot-mode.h | 6 ++
> drivers/power/reset/syscon-reboot-mode.c | 64 +++++++++++++
> include/dt-bindings/soc/rockchip_boot-mode.h | 30 ++++++
> 12 files changed, 325 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.txt
> create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
> create mode 100644 drivers/power/reset/reboot-mode.c
> create mode 100644 drivers/power/reset/reboot-mode.h
> create mode 100644 drivers/power/reset/syscon-reboot-mode.c
> create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
>
--
Thanks,
Caesar