2016-03-03 08:03:11

by Peppe CAVALLARO

[permalink] [raw]
Subject: Re: [PATCH] stmmac: Fix 'eth0: No PHY found' regression

On 2/29/2016 5:18 PM, Gabriel Fernandez wrote:
> This patch manages the case when you have an Ethernet MAC with
> a "fixed link", and not connected to a normal MDIO-managed PHY device.
>
> The test of phy_bus_name was not helpful because it was never affected
> and replaced by the mdio test node.
>
> Signed-off-by: Gabriel Fernandez <[email protected]>

Acked-by: Giuseppe Cavallaro <[email protected]>

> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 +----------
> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++-
> include/linux/stmmac.h | 1 +
> 3 files changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index 0faf163..efb54f3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -199,21 +199,12 @@ int stmmac_mdio_register(struct net_device *ndev)
> struct stmmac_priv *priv = netdev_priv(ndev);
> struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
> int addr, found;
> - struct device_node *mdio_node = NULL;
> - struct device_node *child_node = NULL;
> + struct device_node *mdio_node = priv->plat->mdio_node;
>
> if (!mdio_bus_data)
> return 0;
>
> if (IS_ENABLED(CONFIG_OF)) {
> - for_each_child_of_node(priv->device->of_node, child_node) {
> - if (of_device_is_compatible(child_node,
> - "snps,dwmac-mdio")) {
> - mdio_node = child_node;
> - break;
> - }
> - }
> -
> if (mdio_node) {
> netdev_dbg(ndev, "FOUND MDIO subnode\n");
> } else {
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 6a52fa1..4514ba7 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -110,6 +110,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
> struct device_node *np = pdev->dev.of_node;
> struct plat_stmmacenet_data *plat;
> struct stmmac_dma_cfg *dma_cfg;
> + struct device_node *child_node = NULL;
>
> plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
> if (!plat)
> @@ -140,13 +141,19 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
> plat->phy_node = of_node_get(np);
> }
>
> + for_each_child_of_node(np, child_node)
> + if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) {
> + plat->mdio_node = child_node;
> + break;
> + }
> +
> /* "snps,phy-addr" is not a standard property. Mark it as deprecated
> * and warn of its use. Remove this when phy node support is added.
> */
> if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
> dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
>
> - if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name)
> + if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node)
> plat->mdio_bus_data = NULL;
> else
> plat->mdio_bus_data =
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index eead8ab..881a79d 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -100,6 +100,7 @@ struct plat_stmmacenet_data {
> int interface;
> struct stmmac_mdio_bus_data *mdio_bus_data;
> struct device_node *phy_node;
> + struct device_node *mdio_node;
> struct stmmac_dma_cfg *dma_cfg;
> int clk_csr;
> int has_gmac;
>