device_register() is calling ->get_voltage() as part of is sysfs attribute
initialization process, and this functions might need to know the regulator
constraints to return a valid value.
This is at least true for the pwm regulator driver (when operating in
continuous mode) which needs to know the minimum and maximum voltage values
to calculate the current voltage:
min_uV + (((max_uV - min_uV) * dutycycle) / 100);
Move device_register() after set_machine_constraints() to make sure those
constraints are correctly initialized when ->get_voltage() is called.
Signed-off-by: Boris Brezillon <[email protected]>
Reported-by: Stephen Barber <[email protected]>
---
drivers/regulator/core.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index e0b7642..8258568 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3950,13 +3950,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
rdev->dev.parent = dev;
dev_set_name(&rdev->dev, "regulator.%lu",
(unsigned long) atomic_inc_return(®ulator_no));
- ret = device_register(&rdev->dev);
- if (ret != 0) {
- put_device(&rdev->dev);
- goto wash;
- }
-
- dev_set_drvdata(&rdev->dev, rdev);
/* set regulator constraints */
if (init_data)
@@ -3964,7 +3957,15 @@ regulator_register(const struct regulator_desc *regulator_desc,
ret = set_machine_constraints(rdev, constraints);
if (ret < 0)
- goto scrub;
+ goto wash;
+
+ ret = device_register(&rdev->dev);
+ if (ret != 0) {
+ put_device(&rdev->dev);
+ goto wash;
+ }
+
+ dev_set_drvdata(&rdev->dev, rdev);
if (init_data && init_data->supply_regulator)
rdev->supply_name = init_data->supply_regulator;
@@ -3993,8 +3994,6 @@ out:
unset_supplies:
unset_regulator_supplies(rdev);
-
-scrub:
regulator_ena_gpio_free(rdev);
device_unregister(&rdev->dev);
/* device core frees rdev */
@@ -4002,6 +4001,7 @@ scrub:
goto out;
wash:
+ kfree(rdev->constraints);
regulator_ena_gpio_free(rdev);
clean:
kfree(rdev);
--
2.5.0
On Tue, 12 Apr 2016 12:31:00 +0200
Boris Brezillon <[email protected]> wrote:
> device_register() is calling ->get_voltage() as part of is sysfs attribute
^ its
> initialization process, and this functions might need to know the regulator
> constraints to return a valid value.
> This is at least true for the pwm regulator driver (when operating in
> continuous mode) which needs to know the minimum and maximum voltage values
> to calculate the current voltage:
>
> min_uV + (((max_uV - min_uV) * dutycycle) / 100);
>
> Move device_register() after set_machine_constraints() to make sure those
> constraints are correctly initialized when ->get_voltage() is called.
>
> Signed-off-by: Boris Brezillon <[email protected]>
> Reported-by: Stephen Barber <[email protected]>
> ---
> drivers/regulator/core.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index e0b7642..8258568 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -3950,13 +3950,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
> rdev->dev.parent = dev;
> dev_set_name(&rdev->dev, "regulator.%lu",
> (unsigned long) atomic_inc_return(®ulator_no));
> - ret = device_register(&rdev->dev);
> - if (ret != 0) {
> - put_device(&rdev->dev);
> - goto wash;
> - }
> -
> - dev_set_drvdata(&rdev->dev, rdev);
>
> /* set regulator constraints */
> if (init_data)
> @@ -3964,7 +3957,15 @@ regulator_register(const struct regulator_desc *regulator_desc,
>
> ret = set_machine_constraints(rdev, constraints);
> if (ret < 0)
> - goto scrub;
> + goto wash;
> +
> + ret = device_register(&rdev->dev);
> + if (ret != 0) {
> + put_device(&rdev->dev);
> + goto wash;
> + }
> +
> + dev_set_drvdata(&rdev->dev, rdev);
>
> if (init_data && init_data->supply_regulator)
> rdev->supply_name = init_data->supply_regulator;
> @@ -3993,8 +3994,6 @@ out:
>
> unset_supplies:
> unset_regulator_supplies(rdev);
> -
> -scrub:
> regulator_ena_gpio_free(rdev);
> device_unregister(&rdev->dev);
> /* device core frees rdev */
> @@ -4002,6 +4001,7 @@ scrub:
> goto out;
>
> wash:
> + kfree(rdev->constraints);
> regulator_ena_gpio_free(rdev);
> clean:
> kfree(rdev);
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
?? 2016??04??12?? 18:31, Boris Brezillon ะด??:
> device_register() is calling ->get_voltage() as part of is sysfs attribute
> initialization process, and this functions might need to know the regulator
> constraints to return a valid value.
> This is at least true for the pwm regulator driver (when operating in
> continuous mode) which needs to know the minimum and maximum voltage values
> to calculate the current voltage:
>
> min_uV + (((max_uV - min_uV) * dutycycle) / 100);
>
> Move device_register() after set_machine_constraints() to make sure those
> constraints are correctly initialized when ->get_voltage() is called.
>
> Signed-off-by: Boris Brezillon <[email protected]>
> Reported-by: Stephen Barber <[email protected]>
Tested-by: Caesar Wang <[email protected]>
Yep, do many reboot tests on my rk3399 evb board.
that's seem fix the crash issue.
[ 0.744584] task: ffffffc0edab8000 ti: ffffffc0edac0000 task.ti:
ffffffc0edac0000 [ 0.752803]
PC is at pwm_regulator_get_voltage+0x28/0x54 [ 0.758628]
LR is at pwm_regulator_get_voltage+0x14/0x54
....
As the same reported on https://patchwork.kernel.org/patch/8702441/
> ---
> drivers/regulator/core.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index e0b7642..8258568 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -3950,13 +3950,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
> rdev->dev.parent = dev;
> dev_set_name(&rdev->dev, "regulator.%lu",
> (unsigned long) atomic_inc_return(®ulator_no));
> - ret = device_register(&rdev->dev);
> - if (ret != 0) {
> - put_device(&rdev->dev);
> - goto wash;
> - }
> -
> - dev_set_drvdata(&rdev->dev, rdev);
>
> /* set regulator constraints */
> if (init_data)
> @@ -3964,7 +3957,15 @@ regulator_register(const struct regulator_desc *regulator_desc,
>
> ret = set_machine_constraints(rdev, constraints);
> if (ret < 0)
> - goto scrub;
> + goto wash;
> +
> + ret = device_register(&rdev->dev);
> + if (ret != 0) {
> + put_device(&rdev->dev);
> + goto wash;
> + }
> +
> + dev_set_drvdata(&rdev->dev, rdev);
>
> if (init_data && init_data->supply_regulator)
> rdev->supply_name = init_data->supply_regulator;
> @@ -3993,8 +3994,6 @@ out:
>
> unset_supplies:
> unset_regulator_supplies(rdev);
> -
> -scrub:
> regulator_ena_gpio_free(rdev);
> device_unregister(&rdev->dev);
> /* device core frees rdev */
> @@ -4002,6 +4001,7 @@ scrub:
> goto out;
>
> wash:
> + kfree(rdev->constraints);
> regulator_ena_gpio_free(rdev);
> clean:
> kfree(rdev);
>
> --
> Thanks,
> Caesar
The patch
regulator: reorder initialization steps in regulator_register()
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 469b640e4f4a28bdd50f0ac1d2b310907afb464c Mon Sep 17 00:00:00 2001
From: Boris Brezillon <[email protected]>
Date: Tue, 12 Apr 2016 12:31:00 +0200
Subject: [PATCH] regulator: reorder initialization steps in
regulator_register()
device_register() is calling ->get_voltage() as part of it's sysfs attribute
initialization process, and this functions might need to know the regulator
constraints to return a valid value.
This is at least true for the pwm regulator driver (when operating in
continuous mode) which needs to know the minimum and maximum voltage values
to calculate the current voltage:
min_uV + (((max_uV - min_uV) * dutycycle) / 100);
Move device_register() after set_machine_constraints() to make sure those
constraints are correctly initialized when ->get_voltage() is called.
Signed-off-by: Boris Brezillon <[email protected]>
Reported-by: Stephen Barber <[email protected]>
Tested-by: Caesar Wang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/regulator/core.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index e0b764284773..8258568c793a 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3950,13 +3950,6 @@ regulator_register(const struct regulator_desc *regulator_desc,
rdev->dev.parent = dev;
dev_set_name(&rdev->dev, "regulator.%lu",
(unsigned long) atomic_inc_return(®ulator_no));
- ret = device_register(&rdev->dev);
- if (ret != 0) {
- put_device(&rdev->dev);
- goto wash;
- }
-
- dev_set_drvdata(&rdev->dev, rdev);
/* set regulator constraints */
if (init_data)
@@ -3964,7 +3957,15 @@ regulator_register(const struct regulator_desc *regulator_desc,
ret = set_machine_constraints(rdev, constraints);
if (ret < 0)
- goto scrub;
+ goto wash;
+
+ ret = device_register(&rdev->dev);
+ if (ret != 0) {
+ put_device(&rdev->dev);
+ goto wash;
+ }
+
+ dev_set_drvdata(&rdev->dev, rdev);
if (init_data && init_data->supply_regulator)
rdev->supply_name = init_data->supply_regulator;
@@ -3993,8 +3994,6 @@ out:
unset_supplies:
unset_regulator_supplies(rdev);
-
-scrub:
regulator_ena_gpio_free(rdev);
device_unregister(&rdev->dev);
/* device core frees rdev */
@@ -4002,6 +4001,7 @@ scrub:
goto out;
wash:
+ kfree(rdev->constraints);
regulator_ena_gpio_free(rdev);
clean:
kfree(rdev);
--
2.8.0.rc3
On Tue, Apr 12, 2016 at 12:31:00PM +0200, Boris Brezillon wrote:
> device_register() is calling ->get_voltage() as part of is sysfs attribute
> initialization process, and this functions might need to know the regulator
> constraints to return a valid value.
I've pushed this as a signed tag:
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-sysfs-init-order
for you to fetch changes up to 469b640e4f4a28bdd50f0ac1d2b310907afb464c:
regulator: reorder initialization steps in regulator_register() (2016-04-13 07:33:44 +0100)
----------------------------------------------------------------
regulator: Pull the sysfs init after constraint setup
The sysfs attributes can indirectly use information from the constraints
so can trigger warnings with some systems.
----------------------------------------------------------------
Boris Brezillon (1):
regulator: reorder initialization steps in regulator_register()
drivers/regulator/core.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
Hi Thierry,
On Wed, 13 Apr 2016 07:41:40 +0100
Mark Brown <[email protected]> wrote:
> On Tue, Apr 12, 2016 at 12:31:00PM +0200, Boris Brezillon wrote:
> > device_register() is calling ->get_voltage() as part of is sysfs attribute
> > initialization process, and this functions might need to know the regulator
> > constraints to return a valid value.
I realize you were not CCed for this patch, but if we want all the
pwm-atomic support changes (including the pwm-regulator ones) to go
through your tree, you'll have to pull the following branch before
applying "regulator: pwm: retrieve correct voltage".
>
> I've pushed this as a signed tag:
>
> The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
>
> Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/regulator-sysfs-init-order
>
> for you to fetch changes up to 469b640e4f4a28bdd50f0ac1d2b310907afb464c:
>
> regulator: reorder initialization steps in regulator_register() (2016-04-13 07:33:44 +0100)
>
> ----------------------------------------------------------------
> regulator: Pull the sysfs init after constraint setup
>
> The sysfs attributes can indirectly use information from the constraints
> so can trigger warnings with some systems.
>
> ----------------------------------------------------------------
> Boris Brezillon (1):
> regulator: reorder initialization steps in regulator_register()
>
> drivers/regulator/core.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
Thanks,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com