Add dtsi file for RK3399 SoCs, and evb dts file for RK3399 evb.
To make patch more easily to be reviewed, some nodes have been removed
temporarily, after this base file been applied, more patches will be
upstreamed independently.
Jianqun Xu (3):
ARM64: dts: rockchip: add core dtsi file for RK3399 SoCs
ARM64: dts: rockchip: add RK3399 evaluation board
ARM64: dts: rockchip: add dts file for RK3399 evaluation board
Shawn Lin (1):
Documentation: rockchip-dw-mshc: add description for rk3399
Documentation/devicetree/bindings/arm/rockchip.txt | 6 +-
.../devicetree/bindings/mmc/rockchip-dw-mshc.txt | 1 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 122 +++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1022 ++++++++++++++++++++
5 files changed, 1151 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399.dtsi
--
changes in v2:
- split into more patches. (Heiko)
- remove arm-pmu at first. (Marc, Heiko, Mark)
- remove rga, emmc, usb3, mipi, edp, pd, i2c, gpu, thermal, tsadc, saradc, which will upstream independently
- remove rk808 since without i2c, which will upstream independently
- remove es8316 since without i2c, which will upstream independently
- add rockchip-dw-mshc binding patch
- add rockchip,rk3399-evb binding patch
- fix codingstyle issues
1.9.1
From: Shawn Lin <[email protected]>
Add "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc" for
dwmmc on rk3399 platform.
Change-Id: Ieefafab5f0e9650271e823659e2bec1556c4a9bc
Signed-off-by: Shawn Lin <[email protected]>
---
changes in v2:
- new add patch
Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index ea5614b..07184e8 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -15,6 +15,7 @@ Required Properties:
- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
+ - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
Optional Properties:
* clocks: from common clock binding: if ciu_drive and ciu_sample are
--
1.9.1
This patch adds core dtsi file for Rockchip RK3399 SoCs.
The RK3399 has big/little architecture, which needs a separate
node for the PMU of each microarchitecture, for now it missing
the pmu node since the old one could not work well.
Marc is working on it with:
https://lkml.org/lkml/2016/4/11/182
and on the following branch:
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git
irq/percpu-partition
That will to be tested on RK3399 evb.
Signed-off-by: Jianqun Xu <[email protected]>
---
changes in v2:
- remove arm-pmu at first. (Marc, Heiko, Mark)
- remove rga, emmc, usb3, mipi, edp, pd, i2c, gpu, thermal, tsadc, saradc, which will upstream independently
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1022 ++++++++++++++++++++++++++++++
1 file changed, 1022 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
new file mode 100644
index 0000000..5a8a915
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -0,0 +1,1022 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ compatible = "rockchip,rk3399";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_l0>;
+ };
+ core1 {
+ cpu = <&cpu_l1>;
+ };
+ core2 {
+ cpu = <&cpu_l2>;
+ };
+ core3 {
+ cpu = <&cpu_l3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu_b0>;
+ };
+ core1 {
+ cpu = <&cpu_b1>;
+ };
+ };
+ };
+
+ cpu_l0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ #cooling-cells = <2>; /* min followed by max */
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_l1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_l2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_l3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKL>;
+ };
+
+ cpu_b0: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ #cooling-cells = <2>; /* min followed by max */
+ clocks = <&cru ARMCLKB>;
+ };
+
+ cpu_b1: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLKB>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac_bus: dma-controller@ff6d0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6d0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC0_PERILP>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_peri: dma-controller@ff6e0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff6e0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC1_PERILP>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ sdio0: dwmmc@fe310000 {
+ compatible = "rockchip,rk3399-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe310000 0x0 0x4000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@fe320000 {
+ compatible = "rockchip,rk3399-dw-mshc",
+ "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe320000 0x0 0x4000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clock-freq-min-max = <400000 150000000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ status = "disabled";
+ };
+
+ sdhci: sdhci@fe330000 {
+ compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+ reg = <0x0 0xfe330000 0x0 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+ clock-names = "clk_xin", "clk_ahb";
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@fe380000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfe380000 0x0 0x20000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
+ clock-names = "hclk_host0", "hclk_host0_arb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fe3a0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfe3a0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
+ clock-names = "hclk_host0", "hclk_host0_arb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fe3c0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfe3c0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
+ clock-names = "hclk_host1", "hclk_host1_arb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fe3e0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfe3e0000 0x0 0x20000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
+ clock-names = "hclk_host1", "hclk_host1_arb";
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@fee00000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+
+ reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
+ <0x0 0xfef00000 0 0xc0000>, /* GICR */
+ <0x0 0xfff00000 0 0x10000>, /* GICC */
+ <0x0 0xfff10000 0 0x10000>, /* GICH */
+ <0x0 0xfff20000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ its: interrupt-controller@fee20000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0xfee20000 0x0 0x20000>;
+ };
+ };
+
+ uart0: serial@ff180000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff180000 0x0 0x100>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff190000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff190000 0x0 0x100>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff1a0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1a0000 0x0 0x100>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2c_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff1b0000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff1b0000 0x0 0x100>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff1c0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1c0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff1d0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@ff1e0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1e0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@ff1f0000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1f0000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@ff200000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+ clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pmugrf: syscon@ff320000 {
+ compatible = "rockchip,rk3399-pmugrf", "syscon";
+ reg = <0x0 0xff320000 0x0 0x1000>;
+ };
+
+ spi3: spi@ff350000 {
+ compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff350000 0x0 0x1000>;
+ clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff370000 {
+ compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff370000 0x0 0x100>;
+ clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@ff420000 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420000 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff420010 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420010 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff420020 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420020 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff420030 {
+ compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+ reg = <0x0 0xff420030 0x0 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3a_pin>;
+ clocks = <&pmucru PCLK_RKPWM_PMU>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pmucru: pmu-clock-controller@ff750000 {
+ compatible = "rockchip,rk3399-pmucru";
+ reg = <0x0 0xff750000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&pmucru PLL_PPLL>;
+ assigned-clock-rates = <676000000>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3399-cru";
+ reg = <0x0 0xff760000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3399-grf", "syscon";
+ reg = <0x0 0xff770000 0x0 0x10000>;
+ };
+
+ watchdog@ff840000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x0 0xff840000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ spdif: spdif@ff870000 {
+ compatible = "rockchip,rk3399-spdif";
+ reg = <0x0 0xff870000 0x0 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 7>;
+ dma-names = "tx";
+ clock-names = "mclk", "hclk";
+ clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_bus>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@ff880000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff880000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_8ch_bus>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@ff890000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff890000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 2>, <&dmac_bus 3>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_2ch_bus>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@ff8a0000 {
+ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff8a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmac_bus 4>, <&dmac_bus 5>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3399-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ ranges;
+
+ gpio0: gpio0@ff720000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff720000 0x0 0x100>;
+ clocks = <&pmucru PCLK_GPIO0_PMU>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio1: gpio1@ff730000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff730000 0x0 0x100>;
+ clocks = <&pmucru PCLK_GPIO1_PMU>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio2: gpio2@ff780000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff780000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio3: gpio3@ff788000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff788000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO3>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ gpio4: gpio4@ff790000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff790000 0x0 0x100>;
+ clocks = <&cru PCLK_GPIO4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+ bias-pull-down;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+ bias-disable;
+ drive-strength = <13>;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ <1 15 RK_FUNC_2 &pcfg_pull_none>,
+ <1 16 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ <4 2 RK_FUNC_1 &pcfg_pull_none>,
+ <4 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
+ <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins =
+ <4 17 RK_FUNC_1 &pcfg_pull_none>,
+ <4 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins =
+ <1 12 RK_FUNC_1 &pcfg_pull_none>,
+ <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c5 {
+ i2c5_xfer: i2c5-xfer {
+ rockchip,pins =
+ <3 11 RK_FUNC_2 &pcfg_pull_none>,
+ <3 10 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c6 {
+ i2c6_xfer: i2c6-xfer {
+ rockchip,pins =
+ <2 10 RK_FUNC_2 &pcfg_pull_none>,
+ <2 9 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c7 {
+ i2c7_xfer: i2c7-xfer {
+ rockchip,pins =
+ <2 8 RK_FUNC_2 &pcfg_pull_none>,
+ <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c8 {
+ i2c8_xfer: i2c8-xfer {
+ rockchip,pins =
+ <1 21 RK_FUNC_1 &pcfg_pull_none>,
+ <1 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s0 {
+ i2s0_8ch_bus: i2s0-8ch-bus {
+ rockchip,pins =
+ <3 24 RK_FUNC_1 &pcfg_pull_none>,
+ <3 25 RK_FUNC_1 &pcfg_pull_none>,
+ <3 26 RK_FUNC_1 &pcfg_pull_none>,
+ <3 27 RK_FUNC_1 &pcfg_pull_none>,
+ <3 28 RK_FUNC_1 &pcfg_pull_none>,
+ <3 29 RK_FUNC_1 &pcfg_pull_none>,
+ <3 30 RK_FUNC_1 &pcfg_pull_none>,
+ <3 31 RK_FUNC_1 &pcfg_pull_none>,
+ <4 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_2ch_bus: i2s1-2ch-bus {
+ rockchip,pins =
+ <4 3 RK_FUNC_1 &pcfg_pull_none>,
+ <4 4 RK_FUNC_1 &pcfg_pull_none>,
+ <4 5 RK_FUNC_1 &pcfg_pull_none>,
+ <4 6 RK_FUNC_1 &pcfg_pull_none>,
+ <4 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ spdif {
+ spdif_bus: spdif-bus {
+ rockchip,pins =
+ <4 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins =
+ <3 6 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins =
+ <3 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins =
+ <3 8 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins =
+ <3 5 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins =
+ <3 4 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins =
+ <1 9 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins =
+ <1 10 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins =
+ <1 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins =
+ <1 8 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi2 {
+ spi2_clk: spi2-clk {
+ rockchip,pins =
+ <2 11 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_cs0: spi2-cs0 {
+ rockchip,pins =
+ <2 12 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_rx: spi2-rx {
+ rockchip,pins =
+ <2 9 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_tx: spi2-tx {
+ rockchip,pins =
+ <2 10 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi3 {
+ spi3_clk: spi3-clk {
+ rockchip,pins =
+ <1 17 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi3_cs0: spi3-cs0 {
+ rockchip,pins =
+ <1 18 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi3_rx: spi3-rx {
+ rockchip,pins =
+ <1 15 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi3_tx: spi3-tx {
+ rockchip,pins =
+ <1 16 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi4 {
+ spi4_clk: spi4-clk {
+ rockchip,pins =
+ <3 2 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi4_cs0: spi4-cs0 {
+ rockchip,pins =
+ <3 3 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi4_rx: spi4-rx {
+ rockchip,pins =
+ <3 0 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi4_tx: spi4-tx {
+ rockchip,pins =
+ <3 1 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi5 {
+ spi5_clk: spi5-clk {
+ rockchip,pins =
+ <2 22 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi5_cs0: spi5-cs0 {
+ rockchip,pins =
+ <2 23 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi5_rx: spi5-rx {
+ rockchip,pins =
+ <2 20 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi5_tx: spi5-tx {
+ rockchip,pins =
+ <2 21 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ <2 16 RK_FUNC_1 &pcfg_pull_up>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =
+ <2 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =
+ <2 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =
+ <3 12 RK_FUNC_2 &pcfg_pull_up>,
+ <3 13 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2a {
+ uart2a_xfer: uart2a-xfer {
+ rockchip,pins =
+ <4 8 RK_FUNC_2 &pcfg_pull_up>,
+ <4 9 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2b {
+ uart2b_xfer: uart2b-xfer {
+ rockchip,pins =
+ <4 16 RK_FUNC_2 &pcfg_pull_up>,
+ <4 17 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart2c {
+ uart2c_xfer: uart2c-xfer {
+ rockchip,pins =
+ <4 19 RK_FUNC_1 &pcfg_pull_up>,
+ <4 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins =
+ <3 14 RK_FUNC_2 &pcfg_pull_up>,
+ <3 15 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart3_cts: uart3-cts {
+ rockchip,pins =
+ <3 18 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart3_rts: uart3-rts {
+ rockchip,pins =
+ <3 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins =
+ <1 7 RK_FUNC_1 &pcfg_pull_up>,
+ <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uarthdcp {
+ uarthdcp_xfer: uarthdcp-xfer {
+ rockchip,pins =
+ <4 21 RK_FUNC_2 &pcfg_pull_up>,
+ <4 22 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =
+ <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ vop0_pwm_pin: vop0-pwm-pin {
+ rockchip,pins =
+ <4 18 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =
+ <4 22 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ vop1_pwm_pin: vop1-pwm-pin {
+ rockchip,pins =
+ <4 18 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =
+ <1 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3a {
+ pwm3a_pin: pwm3a-pin {
+ rockchip,pins =
+ <0 6 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3b {
+ pwm3b_pin: pwm3b-pin {
+ rockchip,pins =
+ <1 14 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
--
1.9.1
This patch add rk3399-evb.dts for RK3399 evaluation board.
Tested on RK3399 evb.
Signed-off-by: Jianqun Xu <[email protected]>
---
changes in v2:
- remove rk808 since without i2c, which will upstream independently
- remove es8316 since without i2c, which will upstream independently
- fix codingstyle issues
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 122 ++++++++++++++++++++++++++++
2 files changed, 123 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index df37865..7037a16 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
new file mode 100644
index 0000000..309f870
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+ compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
+
+ vdd_center: vdd-center {
+ compatible = "pwm-regulator";
+ pwms = <&pwm3 0 25000 0>;
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pmic_dvs2: pmic-dvs2 {
+ rockchip,pins =
+ <1 18 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
--
1.9.1
The RK3399 evaluation board is designed with pmic
rk808 on top board.
Signed-off-by: Jianqun Xu <[email protected]>
---
changes in v2:
- new add patch
Documentation/devicetree/bindings/arm/rockchip.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 2549519..6491b56 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -101,4 +101,8 @@ Rockchip platforms device tree bindings
- Rockchip RK3228 Evaluation board:
Required root node properties:
- - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+ - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+- Rockchip RK3399 evb:
+ Required root node properties:
+ - compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
--
1.9.1
On Fri, Apr 22, 2016 at 01:51:44PM +0800, Jianqun Xu wrote:
> From: Shawn Lin <[email protected]>
>
> Add "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc" for
> dwmmc on rk3399 platform.
>
> Change-Id: Ieefafab5f0e9650271e823659e2bec1556c4a9bc
Drop this Gerrit tag.
> Signed-off-by: Shawn Lin <[email protected]>
> ---
> changes in v2:
> - new add patch
>
> Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 1 +
> 1 file changed, 1 insertion(+)
With that,
Acked-by: Rob Herring <[email protected]>
On Fri, Apr 22, 2016 at 01:51:46PM +0800, Jianqun Xu wrote:
> The RK3399 evaluation board is designed with pmic
> rk808 on top board.
>
> Signed-off-by: Jianqun Xu <[email protected]>
> ---
> changes in v2:
> - new add patch
>
> Documentation/devicetree/bindings/arm/rockchip.txt | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
Acked-by: Rob Herring <[email protected]>
在 2016年04月22日 13:51, Jianqun Xu 写道:
> This patch add rk3399-evb.dts for RK3399 evaluation board.
> Tested on RK3399 evb.
>
> Signed-off-by: Jianqun Xu <[email protected]>
> ---
> changes in v2:
> - remove rk808 since without i2c, which will upstream independently
> - remove es8316 since without i2c, which will upstream independently
> - fix codingstyle issues
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 122 ++++++++++++++++++++++++++++
> 2 files changed, 123 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index df37865..7037a16 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -1,6 +1,7 @@
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> new file mode 100644
> index 0000000..309f870
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> @@ -0,0 +1,122 @@
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/pwm/pwm.h>
> +#include "rk3399.dtsi"
> +
> +/ {
> + compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
I pick them up in my github.
(https://github.com/Caesar-github/rockchip/tree/wip/fixes-thermal-0425)
Can we add the following strings to match the loader (coreboot)?
No matter, we can match the loader(coreboot) to bring up the evb board
on now or in the future.
...,"google,rk3399evb-rev3",
google,rk3399evb-rev2",google,rk3399evb-rev1","google,rk3399evb-rev0"
Bring up my evb board:
...
Compat preference: google,rk3399evb-rev0
Config conf@4, kernel kernel@1, fdt fdt@4, compat google,rk3399evb-rev0
(match) rockchip,rk3399-evb rockchip,rk3399
Config conf@3, kernel kernel@1, fdt fdt@3, compat rockchip,r88
rockchip,rk3368
Config conf@2, kernel kernel@1, fdt fdt@2, compat geekbuying,geekbox
rockchip,rk3368
Config conf@1 (default), kernel kernel@1, fdt fdt@1, compat
rockchip,rk3368-evb-act8846 rockchip,rk3368
Choosing best match conf@4.
Shutting down all USB controllers.
Exiting depthcharge with code 4 at timestamp: 6031792
WARNING: Skipping low memory range [0x0:0x500000]!
Relocating kernel to 0x680000
jumping to kernel
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version
4.6.0-rc4-next-20160422-00016-g0ac0bfb-dirty (wxt@nb) (gcc version
4.9.x-google 20140827 (prerelease) (GCC) ) #16 SMP PR
....
--
<cut>
-
Caesar
--
Thanks,
Caesar
Am Montag, 25. April 2016, 09:47:15 schrieb Caesar Wang:
> 在 2016年04月22日 13:51, Jianqun Xu 写道:
> > This patch add rk3399-evb.dts for RK3399 evaluation board.
> > Tested on RK3399 evb.
> >
> > Signed-off-by: Jianqun Xu <[email protected]>
> > ---
> > changes in v2:
> > - remove rk808 since without i2c, which will upstream independently
> > - remove es8316 since without i2c, which will upstream independently
> > - fix codingstyle issues
> >
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 122
> > ++++++++++++++++++++++++++++ 2 files changed, 123 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> > b/arch/arm64/boot/dts/rockchip/Makefile index df37865..7037a16 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -1,6 +1,7 @@
> >
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
> >
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
> >
> > always := $(dtb-y)
> > subdir-y := $(dts-dirs)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> > b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts new file mode 100644
> > index 0000000..309f870
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> > @@ -0,0 +1,122 @@
> > +/*
> > + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + * a) This file is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of the
> > + * License, or (at your option) any later version.
> > + *
> > + * This file is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + * b) Permission is hereby granted, free of charge, to any person
> > + * obtaining a copy of this software and associated documentation
> > + * files (the "Software"), to deal in the Software without
> > + * restriction, including without limitation the rights to use,
> > + * copy, modify, merge, publish, distribute, sublicense, and/or
> > + * sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following
> > + * conditions:
> > + *
> > + * The above copyright notice and this permission notice shall be
> > + * included in all copies or substantial portions of the Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + * OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/pwm/pwm.h>
> > +#include "rk3399.dtsi"
> > +
> > +/ {
> > + compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
>
> I pick them up in my github.
> (https://github.com/Caesar-github/rockchip/tree/wip/fixes-thermal-0425)
>
> Can we add the following strings to match the loader (coreboot)?
> No matter, we can match the loader(coreboot) to bring up the evb board
> on now or in the future.
>
> ...,"google,rk3399evb-rev3",
> google,rk3399evb-rev2",google,rk3399evb-rev1","google,rk3399evb-rev0"
Yep, that should be no problem ... i.e. we also have this longer list of board
matches for the previous veyron boards (both in the dts files as well as the
board-binding document)
Heiko
Hi,
On Mon, Apr 25, 2016 at 12:37 AM, Heiko Stübner <[email protected]> wrote:
>> Can we add the following strings to match the loader (coreboot)?
>> No matter, we can match the loader(coreboot) to bring up the evb board
>> on now or in the future.
>>
>> ...,"google,rk3399evb-rev3",
>> google,rk3399evb-rev2",google,rk3399evb-rev1","google,rk3399evb-rev0"
>
> Yep, that should be no problem ... i.e. we also have this longer list of board
> matches for the previous veyron boards (both in the dts files as well as the
> board-binding document)
Just to make sure we're on the same page: I presume we're expecting
the Jay spin with this change?
-Doug
On Fri, Apr 22, 2016 at 01:51:46PM +0800, Jianqun Xu wrote:
> The RK3399 evaluation board is designed with pmic
> rk808 on top board.
>
> Signed-off-by: Jianqun Xu <[email protected]>
> ---
> changes in v2:
> - new add patch
FWIW, the $subject is a bit confusing. Probaly should be "Documentation:
...". But otherwise, LGTM.
On Fri, Apr 22, 2016 at 01:51:45PM +0800, Jianqun Xu wrote:
> This patch adds core dtsi file for Rockchip RK3399 SoCs.
>
> The RK3399 has big/little architecture, which needs a separate
> node for the PMU of each microarchitecture, for now it missing
> the pmu node since the old one could not work well.
>
> Marc is working on it with:
> https://lkml.org/lkml/2016/4/11/182
>
> and on the following branch:
> git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git
> irq/percpu-partition
>
> That will to be tested on RK3399 evb.
>
> Signed-off-by: Jianqun Xu <[email protected]>
> ---
> changes in v2:
> - remove arm-pmu at first. (Marc, Heiko, Mark)
> - remove rga, emmc, usb3, mipi, edp, pd, i2c, gpu, thermal, tsadc, saradc, which will upstream independently
Tested (a non EVB board) and can boot to prompt:
Tested-by: Brian Norris <[email protected]>
Hi Brian:
On 2016年04月26日 07:22, Brian Norris wrote:
> On Fri, Apr 22, 2016 at 01:51:46PM +0800, Jianqun Xu wrote:
>> The RK3399 evaluation board is designed with pmic
>> rk808 on top board.
>>
>> Signed-off-by: Jianqun Xu <[email protected]>
>> ---
>> changes in v2:
>> - new add patch
>
> FWIW, the $subject is a bit confusing. Probaly should be "Documentation:
> ...". But otherwise, LGTM.
>
>
ok, I will fix it in next version, thanks ~
>
Hi Doug:
On 2016年04月26日 06:23, Doug Anderson wrote:
> Hi,
>
> On Mon, Apr 25, 2016 at 12:37 AM, Heiko Stübner <[email protected]> wrote:
>>> Can we add the following strings to match the loader (coreboot)?
>>> No matter, we can match the loader(coreboot) to bring up the evb board
>>> on now or in the future.
>>>
>>> ...,"google,rk3399evb-rev3",
>>> google,rk3399evb-rev2",google,rk3399evb-rev1","google,rk3399evb-rev0"
>>
>> Yep, that should be no problem ... i.e. we also have this longer list of board
>> matches for the previous veyron boards (both in the dts files as well as the
>> board-binding document)
>
> Just to make sure we're on the same page: I presume we're expecting
> the Jay spin with this change?
>
Got it, and do you think it's better to use rk3399-evb-rev1 but
rk3399evb-rev1, since the dts use rk3399-evb ?
Anyway I just want to point out that we needn't to fix in the future.
> -Doug
>
>
>
Hi Brian:
On 2016年04月26日 07:22, Brian Norris wrote:
> On Fri, Apr 22, 2016 at 01:51:46PM +0800, Jianqun Xu wrote:
>> The RK3399 evaluation board is designed with pmic
>> rk808 on top board.
>>
>> Signed-off-by: Jianqun Xu <[email protected]>
>> ---
>> changes in v2:
>> - new add patch
>
> FWIW, the $subject is a bit confusing. Probaly should be "Documentation:
> ...". But otherwise, LGTM.
>
yes, I will fix it in next version, thanks
>
>