On 9/6/23 18:53, Szuying Chen wrote:
> Cleared PxIS and PxIE with error recovery when ISR handle interface fatal.
This sentence has no verb and is unclear. What exactly are you trying to say ?
> Then a SDB FIS with ERR (set PxIS.TFES) is received
> before PxCMD.ST is set to 0.
Then -> Then if ?
Then what ? you are not saying what happen in this case.
> When error recovery was finish and PxCMD.ST is set to 1.
was finish -> finishes ?
And ? what happen when that is true ?
> The HBA can't issue any new commands.
That is the issue, but given that all the sentences above are very unclear, it
is hard to understand what conditions lead to this.
> Because the PxIS.TFES bit is not cleared.
Why split that as a different sentence ? Shouldn't this be:
The HBA cannot issue any new command because the PxIS.TFES bit is not cleared.
> To avoid this,
> we adds the function to clear pending interrupt before COMRESET.
> It follows the AHCI 1.3.1 - section 6.2.2.2 specification.
To avoid this, introduce the function ahci_port_clear_pending_irq() to clear
pending interrupts before executing a COMRESET. This follows the AHCI 1.3.1 -
section 6.2.2.2 specification.
>
> Signed-off-by: Szuying Chen <[email protected]>
> ---
> V1->V2: On suggestion by Damien to renamed helper function and modified
> ahci_port_init() to make use of the helper.
> V2->V3: On suggestion by Niklas to modify commit log and delete the
> extra describe.
>
> drivers/ata/libahci.c | 35 +++++++++++++++++++++++------------
> 1 file changed, 23 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index e2bacedf28ef..f1263364fa97 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -1256,6 +1256,26 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
> return sprintf(buf, "%d\n", emp->blink_policy);
> }
>
> +static void ahci_port_clear_pending_irq(struct ata_port *ap)
> +{
> + struct ahci_host_priv *hpriv = ap->host->private_data;
> + void __iomem *port_mmio = ahci_port_base(ap);
> + u32 tmp;
> +
> + /* clear SError */
> + tmp = readl(port_mmio + PORT_SCR_ERR);
> + dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp);
> + writel(tmp, port_mmio + PORT_SCR_ERR);
> +
> + /* clear port IRQ */
> + tmp = readl(port_mmio + PORT_IRQ_STAT);
> + dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp);
> + if (tmp)
> + writel(tmp, port_mmio + PORT_IRQ_STAT);
> +
> + writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT);
> +}
> +
> static void ahci_port_init(struct device *dev, struct ata_port *ap,
> int port_no, void __iomem *mmio,
> void __iomem *port_mmio)
> @@ -1270,18 +1290,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
> if (rc)
> dev_warn(dev, "%s (%d)\n", emsg, rc);
>
> - /* clear SError */
> - tmp = readl(port_mmio + PORT_SCR_ERR);
> - dev_dbg(dev, "PORT_SCR_ERR 0x%x\n", tmp);
> - writel(tmp, port_mmio + PORT_SCR_ERR);
> -
> - /* clear port IRQ */
> - tmp = readl(port_mmio + PORT_IRQ_STAT);
> - dev_dbg(dev, "PORT_IRQ_STAT 0x%x\n", tmp);
> - if (tmp)
> - writel(tmp, port_mmio + PORT_IRQ_STAT);
> -
> - writel(1 << port_no, mmio + HOST_IRQ_STAT);
> + ahci_port_clear_pending_irq(ap);
>
> /* mark esata ports */
> tmp = readl(port_mmio + PORT_CMD);
> @@ -1603,6 +1612,8 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
> tf.status = ATA_BUSY;
> ata_tf_to_fis(&tf, 0, 0, d2h_fis);
>
> + ahci_port_clear_pending_irq(ap);
> +
> rc = sata_link_hardreset(link, timing, deadline, online,
> ahci_check_ready);
>
> --
> 2.39.2
>
--
Damien Le Moal
Western Digital Research