On 09/29, Rajendra Nayak wrote:
> This is a skeletal CPU clock driver, which adds support for the
> CPU SS primary as well as secondary/alternate PLLs, and the
> primary/secondary muxes.
>
> This still has support missing for
> 1. CBF PLL and mux
> 2. ACD
> 3. APM
Maybe you can put a clk tree diagram here so we understand the
hierarchy.
>
> Signed-off-by: Rajendra Nayak <[email protected]>
> ---
DT binding document?
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 2a25f4e..407668d 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -10,6 +10,7 @@ clk-qcom-y += clk-branch.o
> clk-qcom-y += clk-regmap-divider.o
> clk-qcom-y += clk-regmap-mux.o
> clk-qcom-y += reset.o
> +clk-qcom-y += clk-cpu-8996.o
Please add a config option.
> clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
>
> obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
> diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
> new file mode 100644
> index 0000000..e690544
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-cpu-8996.c
> @@ -0,0 +1,408 @@
> +/*
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/cpu.h>
Is this used?
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-pll.h"
> +#include "clk-regmap.h"
> +#include "clk-regmap-mux.h"
> +
> +#define VCO(a, b, c) { \
> + .val = a,\
> + .min_freq = b,\
> + .max_freq = c,\
> +}
> +
> +static const struct alpha_pll_config hfpll_config = {
> + .l = 60,
> + .config_ctl_val = 0x200D4828,
> + .config_ctl_hi_val = 0x006,
> + .pre_div_mask = BIT(12),
> + .post_div_mask = 0x3 << 8,
> + .main_output_mask = BIT(0),
> + .early_output_mask = BIT(3),
> +};
> +
> +static struct clk_alpha_pll perfcl_pll = {
> + .offset = 0x80000,
> + .min_rate = 600000000,
> + .max_rate = 3000000000,
> + .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_16BIT_ALPHA
> + | SUPPORTS_FSM_MODE,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "perfcl_pll",
> + .parent_names = (const char *[]){ "xo_board" },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_hwfsm_ops,
> + },
> +};
> +
> +static struct clk_alpha_pll pwrcl_pll = {
> + .offset = 0x0,
> + .min_rate = 600000000,
> + .max_rate = 3000000000,
> + .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_16BIT_ALPHA
> + | SUPPORTS_FSM_MODE,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "pwrcl_pll",
> + .parent_names = (const char *[]){ "xo_board" },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_hwfsm_ops,
> + },
> +};
> +
> +static const struct pll_vco alt_pll_vco_modes[] = {
> + VCO(3, 250000000, 500000000),
> + VCO(2, 500000000, 750000000),
> + VCO(1, 750000000, 1000000000),
> + VCO(0, 1000000000, 2150400000),
> +};
> +
> +static const struct alpha_pll_config altpll_config = {
> + .l = 16,
> + .vco_val = 0x3 << 20,
> + .vco_mask = 0x3 << 20,
> + .config_ctl_val = 0x4001051B,
Lower case hex please.
> + .post_div_mask = 0x3 << 8,
> + .post_div_val = 0x1,
> + .main_output_mask = BIT(0),
> + .early_output_mask = BIT(3),
> +};
> +
> +static struct clk_alpha_pll perfcl_alt_pll = {
> + .offset = 0x80100,
> + .vco_table = alt_pll_vco_modes,
> + .num_vco = ARRAY_SIZE(alt_pll_vco_modes),
> + .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "perfcl_alt_pll",
> + .parent_names = (const char *[]){ "xo_board" },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_hwfsm_ops,
> + },
> +};
> +
> +static struct clk_alpha_pll pwrcl_alt_pll = {
> + .offset = 0x100,
> + .vco_table = alt_pll_vco_modes,
> + .num_vco = ARRAY_SIZE(alt_pll_vco_modes),
> + .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "pwrcl_alt_pll",
> + .parent_names = (const char *[]){ "xo_board" },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_hwfsm_ops,
> + },
> +};
> +
> +static struct clk_regmap_mux pwrcl_pmux = {
> + .reg = 0x40,
> + .shift = 0,
> + .width = 2,
> + .table = (u32 []){0, 1, 3},
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "pwrcl_pmux",
> + .parent_names = (const char *[]){
> + "pwrcl_smux",
> + "pwrcl_pll",
> + "pwrcl_alt_pll",
> + },
> + .num_parents = 3,
> + .ops = &clk_regmap_mux_closest_ops,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap_mux pwrcl_smux = {
> + .reg = 0x40,
> + .shift = 2,
> + .width = 2,
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "pwrcl_smux",
> + .parent_names = (const char *[]){
> + "xo_board",
> + "pwrcl_pll_main",
> + "sys_apcscbf_clk",
> + "sys_apcsaux_clk",
> + },
> + .num_parents = 4,
> + .ops = &clk_regmap_mux_closest_ops,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap_mux perfcl_pmux = {
> + .reg = 0x80040,
> + .shift = 0,
> + .width = 2,
> + .table = (u32 []){0, 1, 3},
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "perfcl_pmux",
> + .parent_names = (const char *[]){
> + "perfcl_smux",
> + "perfcl_pll",
> + "perfcl_alt_pll",
> + },
> + .num_parents = 3,
> + .ops = &clk_regmap_mux_closest_ops,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +static struct clk_regmap_mux perfcl_smux = {
> + .reg = 0x80040,
> + .shift = 2,
> + .width = 2,
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "perfcl_smux",
> + .parent_names = (const char *[]){
> + "xo_board",
Just use xo please.
> + "perfcl_pll_main",
> + "sys_apcscbf_clk",
> + "sys_apcsaux_clk",
> + },
> + .num_parents = 4,
> + .ops = &clk_regmap_mux_closest_ops,
> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
> +struct clk_cpu_8996 {
> + struct clk_hw *alt_clk;
> + struct clk_hw *pll;
> + struct clk_regmap clkr;
> +};
> +
> +static inline struct clk_cpu_8996 *to_clk_cpu_8996(struct clk_hw *hw)
> +{
> + return container_of(to_clk_regmap(hw), struct clk_cpu_8996, clkr);
> +}
> +
> +static int clk_cpu_8996_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long prate)
> +{
> + int ret;
> + struct clk_cpu_8996 *cpuclk = to_clk_cpu_8996(hw);
> + struct clk *alt_clk, *pll, *parent;
> +
> + alt_clk = clk_hw_get_clk(cpuclk->alt_clk);
> + pll = clk_hw_get_clk(cpuclk->pll);
> + parent = clk_hw_get_clk(clk_hw_get_parent(hw));
> +
> + /* Switch parent to alt clk */
> + if (cpuclk->alt_clk) {
This would be false sometimes?
> + ret = clk_set_parent(parent, alt_clk);
> + if (ret)
> + return ret;
> + }
> +
> + /* Set the PLL to new rate */
> + ret = clk_set_rate(pll, rate);
> + if (ret)
> + goto error;
> +
> + /* Switch back to primary pll */
> + if (cpuclk->alt_clk) {
> + ret = clk_set_parent(parent, pll);
> + if (ret)
> + goto error;
> + }
> + return 0;
> +
> +error:
> + if (cpuclk->alt_clk)
> + clk_set_parent(parent, pll);
> +
> + return ret;
> +}
> +
> +static unsigned long clk_cpu_8996_recalc_rate(struct clk_hw *hw,
> + unsigned long prate)
> +{
> + return clk_hw_get_rate(clk_hw_get_parent(hw));
> +}
If we just pass through parent rate I'm confused what the point
of recalc is here.
> +
> +static long clk_cpu_8996_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + return clk_hw_round_rate(clk_hw_get_parent(hw), rate);
Same here. The core does this already?
> +}
> +
> +static struct clk_ops clk_cpu_8996_ops = {
const?
> + .set_rate = clk_cpu_8996_set_rate,
> + .recalc_rate = clk_cpu_8996_recalc_rate,
> + .round_rate = clk_cpu_8996_round_rate,
This all feels fake... Please fold it onto the mux clk, because
the mux is the true output to the CPU and not this software clk
thing here.
> +};
> +
> +static struct clk_cpu_8996 pwrcl_clk = {
> + .alt_clk = &pwrcl_alt_pll.clkr.hw,
> + .pll = &pwrcl_pll.clkr.hw,
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "pwrcl_clk",
> + .parent_names = (const char *[]){ "pwrcl_pmux" },
> + .num_parents = 1,
> + .ops = &clk_cpu_8996_ops,
> + },
> +};
> +
> +static struct clk_cpu_8996 perfcl_clk = {
> + .alt_clk = &perfcl_alt_pll.clkr.hw,
> + .pll = &perfcl_pll.clkr.hw,
> + .clkr.hw.init = &(struct clk_init_data) {
> + .name = "perfcl_clk",
> + .parent_names = (const char *[]){ "perfcl_pmux" },
> + .num_parents = 1,
> + .ops = &clk_cpu_8996_ops,
> + },
> +};
> +
> +static const struct regmap_config cpu_msm8996_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x80210,
> + .fast_io = true,
> + .val_format_endian = REGMAP_ENDIAN_LITTLE,
> +};
> +
> +static const struct of_device_id match_table[] = {
> + { .compatible = "qcom,cpu-clk-msm8996" },
> + {}
> +};
> +
> +#define cluster_clk_register(dev, clk, clkr) { \
> + clk = devm_clk_register_regmap(dev, clkr); \
> + if (IS_ERR(clk)) \
> + return PTR_ERR(clk); }
Yuck. Why not have an array that we register in a loop instead?
> +
> +#define cpu_clk_register_fixed(dev, clk, name, pname, flags, m, n) { \
> + clk = clk_register_fixed_factor(dev, name, pname, flags, m, n); \
> + if (IS_ERR(clk)) \
> + return PTR_ERR(clk); }
These could also be specified statically and registered in a
loop. Also, please use clk_hw based registration APIs.
> +
> +#define cpu_set_rate(dev, clk, rate) { \
> + if (clk_set_rate(clk, rate)) \
> + dev_err(dev, "Failed to set " #clk " to " #rate "\n"); }
Not used?
> +
> +#define cpu_prepare_enable(dev, clk) { \
> + if (clk_prepare_enable(clk)) \
> + dev_err(dev, "Failed to enable " #clk "\n"); }
> +
> +#define cpu_set_parent(dev, clk, parent) { \
> + if (clk_set_parent(clk, parent)) \
> + dev_err(dev, "Failed to set parent for " #clk "\n"); }
> +
> +struct clk *pwr_clk, *perf_clk;
static? Why do these need to be global though?
> +
> +static int register_cpu_clocks(struct device *dev, struct regmap *regmap)
> +{
> + struct clk *perf_alt_pll, *pwr_alt_pll, *perf_pll, *pwr_pll;
> + struct clk *perf_pmux, *perf_smux, *pwr_pmux, *pwr_smux;
> + struct clk *perf_pll_main, *pwr_pll_main;
> +
> + /* register PLLs */
> + cluster_clk_register(dev, perf_pll, &perfcl_pll.clkr);
> + cluster_clk_register(dev, pwr_pll, &pwrcl_pll.clkr);
> + cluster_clk_register(dev, perf_alt_pll, &perfcl_alt_pll.clkr);
> + cluster_clk_register(dev, pwr_alt_pll, &pwrcl_alt_pll.clkr);
> +
> + /* register MUXs */
> + cluster_clk_register(dev, perf_pmux, &perfcl_pmux.clkr);
> + cluster_clk_register(dev, perf_smux, &perfcl_smux.clkr);
> + cluster_clk_register(dev, pwr_pmux, &pwrcl_pmux.clkr);
> + cluster_clk_register(dev, pwr_smux, &pwrcl_smux.clkr);
> +
> + /* register Fixed clks */
> + cpu_clk_register_fixed(dev, perf_pll_main, "perfcl_pll_main",
> + "perfcl_pll", CLK_SET_RATE_PARENT, 1, 2);
> + cpu_clk_register_fixed(dev, pwr_pll_main, "pwrcl_pll_main",
> + "pwrcl_pll", CLK_SET_RATE_PARENT, 1, 2);
> +
> + /* Register CPU clks */
Capitalized register this time?
> + cluster_clk_register(dev, perf_clk, &perfcl_clk.clkr);
> + cluster_clk_register(dev, pwr_clk, &pwrcl_clk.clkr);
> +
> + /* Initialise the PLLs */
> + clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
> + clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
> + clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
> + clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
> +
> + /* Enable all PLLs and alt PLLs */
> + cpu_prepare_enable(dev, perf_pll);
> + cpu_prepare_enable(dev, pwr_pll);
> + cpu_prepare_enable(dev, perf_alt_pll);
> + cpu_prepare_enable(dev, pwr_alt_pll);
Is this so the clks don't turn off at late init? Or because clk
framework doesn't know these things are already enabled? The
comment doesn't help in understanding here.
> +
> + /* Init MUXes with default parents */
> + cpu_set_parent(dev, perf_pmux, perf_pll);
> + cpu_set_parent(dev, pwr_pmux, pwr_pll);
> + cpu_set_parent(dev, perf_smux, perf_pll_main);
> + cpu_set_parent(dev, pwr_smux, pwr_pll_main);
Can we use assigned-parents in DT instead?
> +
> + return 0;
> +}
> +
> +static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
> +{
> + int ret;
> + void __iomem *base;
> + struct resource *res;
> + struct clk_onecell_data *data;
> + struct device *dev = &pdev->dev;
> + struct regmap *regmap_cpu;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->clks = devm_kcalloc(dev, 3, sizeof(struct clk *), GFP_KERNEL);
sizeof(*data->clks) or I guess hw pointers now. Also 3 != 2?
> + if (!data->clks)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + regmap_cpu = devm_regmap_init_mmio(dev, base,
> + &cpu_msm8996_regmap_config);
> + if (IS_ERR(regmap_cpu))
> + return PTR_ERR(regmap_cpu);
> +
> + ret = register_cpu_clocks(dev, regmap_cpu);
> + if (ret)
> + return ret;
> +
> + data->clks[0] = pwr_clk;
> + data->clks[1] = perf_clk;
> + data->clk_num = 2;
> +
> + return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
> +}
> +
> +static struct platform_driver qcom_cpu_clk_msm8996_driver = {
> + .probe = qcom_cpu_clk_msm8996_driver_probe,
> + .driver = {
> + .name = "qcom-cpu-clk-msm8996",
> + .of_match_table = match_table,
> + },
> +};
> +
> +builtin_platform_driver(qcom_cpu_clk_msm8996_driver);
It can't be a module?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On 11/03/2016 03:47 AM, Stephen Boyd wrote:
> On 09/29, Rajendra Nayak wrote:
>> This is a skeletal CPU clock driver, which adds support for the
>> CPU SS primary as well as secondary/alternate PLLs, and the
>> primary/secondary muxes.
>>
>> This still has support missing for
>> 1. CBF PLL and mux
>> 2. ACD
>> 3. APM
>
> Maybe you can put a clk tree diagram here so we understand the
> hierarchy.
okay, will do.
>
>>
>> Signed-off-by: Rajendra Nayak <[email protected]>
>> ---
>
> DT binding document?
will add.
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index 2a25f4e..407668d 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -10,6 +10,7 @@ clk-qcom-y += clk-branch.o
>> clk-qcom-y += clk-regmap-divider.o
>> clk-qcom-y += clk-regmap-mux.o
>> clk-qcom-y += reset.o
>> +clk-qcom-y += clk-cpu-8996.o
>
> Please add a config option.
will do,
>
>> clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
>>
>> obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
>> diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
>> new file mode 100644
>> index 0000000..e690544
>> --- /dev/null
>> +++ b/drivers/clk/qcom/clk-cpu-8996.c
>> @@ -0,0 +1,408 @@
>> +/*
>> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/cpu.h>
>
> Is this used?
not used, will remove
>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +
>> +#include "clk-alpha-pll.h"
>> +#include "clk-pll.h"
>> +#include "clk-regmap.h"
>> +#include "clk-regmap-mux.h"
>> +
>> +#define VCO(a, b, c) { \
>> + .val = a,\
>> + .min_freq = b,\
>> + .max_freq = c,\
>> +}
>> +
>> +static const struct alpha_pll_config hfpll_config = {
>> + .l = 60,
>> + .config_ctl_val = 0x200D4828,
>> + .config_ctl_hi_val = 0x006,
>> + .pre_div_mask = BIT(12),
>> + .post_div_mask = 0x3 << 8,
>> + .main_output_mask = BIT(0),
>> + .early_output_mask = BIT(3),
>> +};
>> +
>> +static struct clk_alpha_pll perfcl_pll = {
>> + .offset = 0x80000,
>> + .min_rate = 600000000,
>> + .max_rate = 3000000000,
>> + .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_16BIT_ALPHA
>> + | SUPPORTS_FSM_MODE,
>> + .clkr.hw.init = &(struct clk_init_data){
>> + .name = "perfcl_pll",
>> + .parent_names = (const char *[]){ "xo_board" },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_hwfsm_ops,
>> + },
>> +};
>> +
>> +static struct clk_alpha_pll pwrcl_pll = {
>> + .offset = 0x0,
>> + .min_rate = 600000000,
>> + .max_rate = 3000000000,
>> + .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_16BIT_ALPHA
>> + | SUPPORTS_FSM_MODE,
>> + .clkr.hw.init = &(struct clk_init_data){
>> + .name = "pwrcl_pll",
>> + .parent_names = (const char *[]){ "xo_board" },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_hwfsm_ops,
>> + },
>> +};
>> +
>> +static const struct pll_vco alt_pll_vco_modes[] = {
>> + VCO(3, 250000000, 500000000),
>> + VCO(2, 500000000, 750000000),
>> + VCO(1, 750000000, 1000000000),
>> + VCO(0, 1000000000, 2150400000),
>> +};
>> +
>> +static const struct alpha_pll_config altpll_config = {
>> + .l = 16,
>> + .vco_val = 0x3 << 20,
>> + .vco_mask = 0x3 << 20,
>> + .config_ctl_val = 0x4001051B,
>
> Lower case hex please.
will fix
>
>> + .post_div_mask = 0x3 << 8,
>> + .post_div_val = 0x1,
>> + .main_output_mask = BIT(0),
>> + .early_output_mask = BIT(3),
>> +};
>> +
>> +static struct clk_alpha_pll perfcl_alt_pll = {
>> + .offset = 0x80100,
>> + .vco_table = alt_pll_vco_modes,
>> + .num_vco = ARRAY_SIZE(alt_pll_vco_modes),
>> + .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "perfcl_alt_pll",
>> + .parent_names = (const char *[]){ "xo_board" },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_hwfsm_ops,
>> + },
>> +};
>> +
>> +static struct clk_alpha_pll pwrcl_alt_pll = {
>> + .offset = 0x100,
>> + .vco_table = alt_pll_vco_modes,
>> + .num_vco = ARRAY_SIZE(alt_pll_vco_modes),
>> + .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "pwrcl_alt_pll",
>> + .parent_names = (const char *[]){ "xo_board" },
>> + .num_parents = 1,
>> + .ops = &clk_alpha_pll_hwfsm_ops,
>> + },
>> +};
>> +
>> +static struct clk_regmap_mux pwrcl_pmux = {
>> + .reg = 0x40,
>> + .shift = 0,
>> + .width = 2,
>> + .table = (u32 []){0, 1, 3},
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "pwrcl_pmux",
>> + .parent_names = (const char *[]){
>> + "pwrcl_smux",
>> + "pwrcl_pll",
>> + "pwrcl_alt_pll",
>> + },
>> + .num_parents = 3,
>> + .ops = &clk_regmap_mux_closest_ops,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap_mux pwrcl_smux = {
>> + .reg = 0x40,
>> + .shift = 2,
>> + .width = 2,
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "pwrcl_smux",
>> + .parent_names = (const char *[]){
>> + "xo_board",
>> + "pwrcl_pll_main",
>> + "sys_apcscbf_clk",
>> + "sys_apcsaux_clk",
>> + },
>> + .num_parents = 4,
>> + .ops = &clk_regmap_mux_closest_ops,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap_mux perfcl_pmux = {
>> + .reg = 0x80040,
>> + .shift = 0,
>> + .width = 2,
>> + .table = (u32 []){0, 1, 3},
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "perfcl_pmux",
>> + .parent_names = (const char *[]){
>> + "perfcl_smux",
>> + "perfcl_pll",
>> + "perfcl_alt_pll",
>> + },
>> + .num_parents = 3,
>> + .ops = &clk_regmap_mux_closest_ops,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +static struct clk_regmap_mux perfcl_smux = {
>> + .reg = 0x80040,
>> + .shift = 2,
>> + .width = 2,
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "perfcl_smux",
>> + .parent_names = (const char *[]){
>> + "xo_board",
>
> Just use xo please.
will do
>
>> + "perfcl_pll_main",
>> + "sys_apcscbf_clk",
>> + "sys_apcsaux_clk",
>> + },
>> + .num_parents = 4,
>> + .ops = &clk_regmap_mux_closest_ops,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +struct clk_cpu_8996 {
>> + struct clk_hw *alt_clk;
>> + struct clk_hw *pll;
>> + struct clk_regmap clkr;
>> +};
>> +
>> +static inline struct clk_cpu_8996 *to_clk_cpu_8996(struct clk_hw *hw)
>> +{
>> + return container_of(to_clk_regmap(hw), struct clk_cpu_8996, clkr);
>> +}
>> +
>> +static int clk_cpu_8996_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long prate)
>> +{
>> + int ret;
>> + struct clk_cpu_8996 *cpuclk = to_clk_cpu_8996(hw);
>> + struct clk *alt_clk, *pll, *parent;
>> +
>> + alt_clk = clk_hw_get_clk(cpuclk->alt_clk);
>> + pll = clk_hw_get_clk(cpuclk->pll);
>> + parent = clk_hw_get_clk(clk_hw_get_parent(hw));
>> +
>> + /* Switch parent to alt clk */
>> + if (cpuclk->alt_clk) {
>
> This would be false sometimes?
maybe not, it would be better to error out without an alt_clk
>
>> + ret = clk_set_parent(parent, alt_clk);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + /* Set the PLL to new rate */
>> + ret = clk_set_rate(pll, rate);
>> + if (ret)
>> + goto error;
>> +
>> + /* Switch back to primary pll */
>> + if (cpuclk->alt_clk) {
>> + ret = clk_set_parent(parent, pll);
>> + if (ret)
>> + goto error;
>> + }
>> + return 0;
>> +
>> +error:
>> + if (cpuclk->alt_clk)
>> + clk_set_parent(parent, pll);
>> +
>> + return ret;
>> +}
>> +
>> +static unsigned long clk_cpu_8996_recalc_rate(struct clk_hw *hw,
>> + unsigned long prate)
>> +{
>> + return clk_hw_get_rate(clk_hw_get_parent(hw));
>> +}
>
> If we just pass through parent rate I'm confused what the point
> of recalc is here.
>
>> +
>> +static long clk_cpu_8996_round_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long *prate)
>> +{
>> + return clk_hw_round_rate(clk_hw_get_parent(hw), rate);
>
> Same here. The core does this already?
>
>> +}
>> +
>> +static struct clk_ops clk_cpu_8996_ops = {
>
> const?
>
>> + .set_rate = clk_cpu_8996_set_rate,
>> + .recalc_rate = clk_cpu_8996_recalc_rate,
>> + .round_rate = clk_cpu_8996_round_rate,
>
> This all feels fake... Please fold it onto the mux clk, because
> the mux is the true output to the CPU and not this software clk
> thing here.
Okay I will try to fold this into the mux clk
>
>> +};
>> +
>> +static struct clk_cpu_8996 pwrcl_clk = {
>> + .alt_clk = &pwrcl_alt_pll.clkr.hw,
>> + .pll = &pwrcl_pll.clkr.hw,
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "pwrcl_clk",
>> + .parent_names = (const char *[]){ "pwrcl_pmux" },
>> + .num_parents = 1,
>> + .ops = &clk_cpu_8996_ops,
>> + },
>> +};
>> +
>> +static struct clk_cpu_8996 perfcl_clk = {
>> + .alt_clk = &perfcl_alt_pll.clkr.hw,
>> + .pll = &perfcl_pll.clkr.hw,
>> + .clkr.hw.init = &(struct clk_init_data) {
>> + .name = "perfcl_clk",
>> + .parent_names = (const char *[]){ "perfcl_pmux" },
>> + .num_parents = 1,
>> + .ops = &clk_cpu_8996_ops,
>> + },
>> +};
>> +
>> +static const struct regmap_config cpu_msm8996_regmap_config = {
>> + .reg_bits = 32,
>> + .reg_stride = 4,
>> + .val_bits = 32,
>> + .max_register = 0x80210,
>> + .fast_io = true,
>> + .val_format_endian = REGMAP_ENDIAN_LITTLE,
>> +};
>> +
>> +static const struct of_device_id match_table[] = {
>> + { .compatible = "qcom,cpu-clk-msm8996" },
>> + {}
>> +};
>> +
>> +#define cluster_clk_register(dev, clk, clkr) { \
>> + clk = devm_clk_register_regmap(dev, clkr); \
>> + if (IS_ERR(clk)) \
>> + return PTR_ERR(clk); }
>
> Yuck. Why not have an array that we register in a loop instead?
>
>> +
>> +#define cpu_clk_register_fixed(dev, clk, name, pname, flags, m, n) { \
>> + clk = clk_register_fixed_factor(dev, name, pname, flags, m, n); \
>> + if (IS_ERR(clk)) \
>> + return PTR_ERR(clk); }
>
> These could also be specified statically and registered in a
> loop. Also, please use clk_hw based registration APIs.
sure, will define an array and loop over
>
>> +
>> +#define cpu_set_rate(dev, clk, rate) { \
>> + if (clk_set_rate(clk, rate)) \
>> + dev_err(dev, "Failed to set " #clk " to " #rate "\n"); }
>
> Not used?
yes, will remove
>
>> +
>> +#define cpu_prepare_enable(dev, clk) { \
>> + if (clk_prepare_enable(clk)) \
>> + dev_err(dev, "Failed to enable " #clk "\n"); }
>> +
>> +#define cpu_set_parent(dev, clk, parent) { \
>> + if (clk_set_parent(clk, parent)) \
>> + dev_err(dev, "Failed to set parent for " #clk "\n"); }
>> +
>> +struct clk *pwr_clk, *perf_clk;
>
> static? Why do these need to be global though?
because I used them in probe to do
>> + data->clks[0] = pwr_clk;
>> + data->clks[1] = perf_clk;
>
>> +
>> +static int register_cpu_clocks(struct device *dev, struct regmap *regmap)
>> +{
>> + struct clk *perf_alt_pll, *pwr_alt_pll, *perf_pll, *pwr_pll;
>> + struct clk *perf_pmux, *perf_smux, *pwr_pmux, *pwr_smux;
>> + struct clk *perf_pll_main, *pwr_pll_main;
>> +
>> + /* register PLLs */
>> + cluster_clk_register(dev, perf_pll, &perfcl_pll.clkr);
>> + cluster_clk_register(dev, pwr_pll, &pwrcl_pll.clkr);
>> + cluster_clk_register(dev, perf_alt_pll, &perfcl_alt_pll.clkr);
>> + cluster_clk_register(dev, pwr_alt_pll, &pwrcl_alt_pll.clkr);
>> +
>> + /* register MUXs */
>> + cluster_clk_register(dev, perf_pmux, &perfcl_pmux.clkr);
>> + cluster_clk_register(dev, perf_smux, &perfcl_smux.clkr);
>> + cluster_clk_register(dev, pwr_pmux, &pwrcl_pmux.clkr);
>> + cluster_clk_register(dev, pwr_smux, &pwrcl_smux.clkr);
>> +
>> + /* register Fixed clks */
>> + cpu_clk_register_fixed(dev, perf_pll_main, "perfcl_pll_main",
>> + "perfcl_pll", CLK_SET_RATE_PARENT, 1, 2);
>> + cpu_clk_register_fixed(dev, pwr_pll_main, "pwrcl_pll_main",
>> + "pwrcl_pll", CLK_SET_RATE_PARENT, 1, 2);
>> +
>> + /* Register CPU clks */
>
> Capitalized register this time?
:) will fix
>
>> + cluster_clk_register(dev, perf_clk, &perfcl_clk.clkr);
>> + cluster_clk_register(dev, pwr_clk, &pwrcl_clk.clkr);
>> +
>> + /* Initialise the PLLs */
>> + clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
>> + clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
>> + clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
>> + clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
>> +
>> + /* Enable all PLLs and alt PLLs */
>> + cpu_prepare_enable(dev, perf_pll);
>> + cpu_prepare_enable(dev, pwr_pll);
>> + cpu_prepare_enable(dev, perf_alt_pll);
>> + cpu_prepare_enable(dev, pwr_alt_pll);
>
> Is this so the clks don't turn off at late init? Or because clk
> framework doesn't know these things are already enabled? The
> comment doesn't help in understanding here.
I don;t quite remember why I did this, will take a relook
>
>> +
>> + /* Init MUXes with default parents */
>> + cpu_set_parent(dev, perf_pmux, perf_pll);
>> + cpu_set_parent(dev, pwr_pmux, pwr_pll);
>> + cpu_set_parent(dev, perf_smux, perf_pll_main);
>> + cpu_set_parent(dev, pwr_smux, pwr_pll_main);
>
> Can we use assigned-parents in DT instead?
sure, will do
>
>> +
>> + return 0;
>> +}
>> +
>> +static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev)
>> +{
>> + int ret;
>> + void __iomem *base;
>> + struct resource *res;
>> + struct clk_onecell_data *data;
>> + struct device *dev = &pdev->dev;
>> + struct regmap *regmap_cpu;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + data->clks = devm_kcalloc(dev, 3, sizeof(struct clk *), GFP_KERNEL);
>
> sizeof(*data->clks) or I guess hw pointers now. Also 3 != 2?
I had the cbf_clk which I removed because there where more things
to be taken care of, and did not update the 3 to 2 :/
>
>> + if (!data->clks)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> +
>> + regmap_cpu = devm_regmap_init_mmio(dev, base,
>> + &cpu_msm8996_regmap_config);
>> + if (IS_ERR(regmap_cpu))
>> + return PTR_ERR(regmap_cpu);
>> +
>> + ret = register_cpu_clocks(dev, regmap_cpu);
>> + if (ret)
>> + return ret;
>> +
>> + data->clks[0] = pwr_clk;
>> + data->clks[1] = perf_clk;
>> + data->clk_num = 2;
>> +
>> + return of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
>> +}
>> +
>> +static struct platform_driver qcom_cpu_clk_msm8996_driver = {
>> + .probe = qcom_cpu_clk_msm8996_driver_probe,
>> + .driver = {
>> + .name = "qcom-cpu-clk-msm8996",
>> + .of_match_table = match_table,
>> + },
>> +};
>> +
>> +builtin_platform_driver(qcom_cpu_clk_msm8996_driver);
>
> It can't be a module?
will fix
thanks for the review
Rajendra
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation