Add dt-binding and devicetree files for QCM6490 IDP.
This patch depends-on:
https://lore.kernel.org/lkml/[email protected]/
----
Changes from v1:
* Dropped suffix platform from model name
* Removed few nodes as they were identical to ones in sc7280
* Specified regulator-initial-mode property to vregs
* Dropped deletion of lpass and swr nodes
* Link to v1: https://lore.kernel.org/lkml/[email protected]/
---
Komal Bajaj (2):
dt-bindings: arm: qcom: Add QCM6490 IDP board
arm64: dts: qcom: qcm6490: Add qcm6490 dts file
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 ++++++++++++++++++
arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++
4 files changed, 431 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi
--
2.42.0
Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP
platform. QCM6490 is derived from SC7280 meant for various
form factor including IoT.
Supported features are, as of now:
* Debug UART
* eMMC
* USB
Signed-off-by: Komal Bajaj <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++
3 files changed, 430 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 73c3be0f8872..3a2d9dbaacce 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
new file mode 100644
index 000000000000..ab9fa9197fe3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcm6490.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+ compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vreg_s1b_1p8: smps1 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7b_0p9: smps7 {
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p2: smps8 {
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p8: ldo1 {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p9: ldo7 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p9: ldo8 {
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p7: ldo11 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p8: ldo12 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p8: ldo13 {
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p2: ldo14 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p8: ldo15 {
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p2: ldo16 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_1p8: ldo17 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vreg_s1c_2p2: smps1 {
+ regulator-min-microvolt = <2190000>;
+ regulator-max-microvolt = <2210000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s9c_1p0: smps9 {
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p8: ldo2 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_3p0: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p8: ldo10 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p8: ldo12 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c_3p0: ldo13 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ };
+ };
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&sdhc_1 {
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ vmmc-supply = <&vreg_l7b_2p9>;
+ vqmmc-supply = <&vreg_l19b_1p8>;
+
+ status = "okay";
+};
+
+&uart5 {
+ compatible = "qcom,geni-debug-uart";
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p8>;
+ vdda33-supply = <&vreg_l2b_3p0>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+ qcom,hs-rise-fall-time-bp = <0>;
+ qcom,squelch-detector-bp = <(-2090)>;
+ qcom,hs-disconnect-bp = <1743>;
+ qcom,hs-amplitude-bp = <1780>;
+ qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+ qcom,hs-output-impedance-micro-ohms = <2600000>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l6b_1p2>;
+ vdda-pll-supply = <&vreg_l1b_0p8>;
+
+ status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+
+&pm8350c_pwm {
+ status = "okay";
+};
+
+&qup_uart5_tx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qup_uart5_rx {
+ drive-strength = <2>;
+ bias-pull-up;
+};
+
+&sdc1_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc1_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_rclk {
+ bias-pull-down;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490.dtsi b/arch/arm64/boot/dts/qcom/qcm6490.dtsi
new file mode 100644
index 000000000000..b93270cae9ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280.dtsi"
+
+/*
+ * Delete unused sc7280 memory nodes and define the memory regions
+ * required by qcm6490
+ */
+/delete-node/ &rmtfs_mem;
+/delete-node/ &wlan_ce_mem;
+
+/{
+ reserved-memory {
+ cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ camera_mem: camera@84300000 {
+ reg = <0x0 0x84300000 0x0 0x500000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@0x84800000 {
+ reg = <0x0 0x84800000 0x0 0x1900000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@86100000 {
+ reg = <0x0 0x86100000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@88900000 {
+ reg = <0x0 0x88900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@8ac00000 {
+ reg = <0x0 0x8ac00000 0x0 0x500000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@8b110000 {
+ reg = <0x0 0x8b110000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@8b11a000 {
+ reg = <0x0 0x8b11a000 0x0 0x2000>;
+ no-map;
+ };
+
+ mpss_mem: mpss@8b800000 {
+ reg = <0x0 0x8b800000 0x0 0xf600000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@c0100000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@c1300000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted_apps@c1800000 {
+ reg = <0x0 0xc1800000 0x0 0x3900000>;
+ no-map;
+ };
+ };
+};
+
+&video_mem {
+ reg = <0x0 0x8a700000 0x0 0x500000>;
+};
+
+&wifi {
+ memory-region = <&wlan_fw_mem>;
+};
+
+&xbl_mem {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+};
--
2.42.0
On 03/10/2023 06:56, Komal Bajaj wrote:
> Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP
> platform. QCM6490 is derived from SC7280 meant for various
> form factor including IoT.
>
> Supported features are, as of now:
> * Debug UART
> * eMMC
> * USB
>
> Signed-off-by: Komal Bajaj <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 +++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++
> 3 files changed, 430 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 73c3be0f8872..3a2d9dbaacce 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> new file mode 100644
> index 000000000000..ab9fa9197fe3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qcm6490.dtsi"
This include should go last
> +#include "pm7325.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QCM6490 IDP";
> + compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
> +
> + aliases {
> + serial0 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm7325-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vreg_s1b_1p8: smps1 {
> + regulator-min-microvolt = <1856000>;
> + regulator-max-microvolt = <2040000>;
> + };
> +
> + vreg_s7b_0p9: smps7 {
> + regulator-min-microvolt = <535000>;
> + regulator-max-microvolt = <1120000>;
> + };
> +
> + vreg_s8b_1p2: smps8 {
> + regulator-min-microvolt = <1256000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
> + };
> +
> + vreg_l1b_0p8: ldo1 {
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p0: ldo2 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p2: ldo6 {
> + regulator-min-microvolt = <1140000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p9: ldo7 {
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_0p9: ldo8 {
> + regulator-min-microvolt = <870000>;
> + regulator-max-microvolt = <970000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_1p2: ldo9 {
> + regulator-min-microvolt = <1080000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11b_1p7: ldo11 {
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_0p8: ldo12 {
> + regulator-min-microvolt = <751000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_0p8: ldo13 {
> + regulator-min-microvolt = <530000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_1p2: ldo14 {
> + regulator-min-microvolt = <1080000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_0p8: ldo15 {
> + regulator-min-microvolt = <765000>;
> + regulator-max-microvolt = <1020000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_1p2: ldo16 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_1p8: ldo17 {
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l18b_1p8: ldo18 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l19b_1p8: ldo19 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vreg_s1c_2p2: smps1 {
> + regulator-min-microvolt = <2190000>;
> + regulator-max-microvolt = <2210000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s9c_1p0: smps9 {
> + regulator-min-microvolt = <1010000>;
> + regulator-max-microvolt = <1170000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1c_1p8: ldo1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_1p8: ldo2 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_3p0: ldo3 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3540000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c_1p8: ldo4 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5c_1p8: ldo5 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6c_2p9: ldo6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7c_3p0: ldo7 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8c_1p8: ldo8 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9c_2p9: ldo9 {
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c_0p8: ldo10 {
> + regulator-min-microvolt = <720000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_2p8: ldo11 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12c_1p8: ldo12 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13c_3p0: ldo13 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob: bob {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + };
> + };
> +};
> +
> +&gpi_dma0 {
> + status = "okay";
> +};
> +
> +&gpi_dma1 {
> + status = "okay";
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&sdhc_1 {
> + non-removable;
> + no-sd;
> + no-sdio;
> +
> + vmmc-supply = <&vreg_l7b_2p9>;
> + vqmmc-supply = <&vreg_l19b_1p8>;
> +
> + status = "okay";
> +};
> +
> +&uart5 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l10c_0p8>;
> + vdda33-supply = <&vreg_l2b_3p0>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> + qcom,hs-rise-fall-time-bp = <0>;
> + qcom,squelch-detector-bp = <(-2090)>;
> + qcom,hs-disconnect-bp = <1743>;
> + qcom,hs-amplitude-bp = <1780>;
> + qcom,hs-crossover-voltage-microvolt = <(-31000)>;
> + qcom,hs-output-impedance-micro-ohms = <2600000>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vreg_l6b_1p2>;
> + vdda-pll-supply = <&vreg_l1b_0p8>;
> +
> + status = "okay";
> +};
> +
> +/* PINCTRL - additions to nodes defined in sc7280.dtsi */
> +
> +&pm8350c_pwm {
> + status = "okay";
> +};
> +
> +&qup_uart5_tx {
> + drive-strength = <2>;
> + bias-disable;
> +};
> +
> +&qup_uart5_rx {
> + drive-strength = <2>;
> + bias-pull-up;
> +};
> +
> +&sdc1_clk {
> + bias-disable;
> + drive-strength = <16>;
> +};
> +
> +&sdc1_cmd {
> + bias-pull-up;
> + drive-strength = <10>;
> +};
> +
> +&sdc1_data {
> + bias-pull-up;
> + drive-strength = <10>;
> +};
> +
> +&sdc1_rclk {
> + bias-pull-down;
> +};
These nodes are out-of-order too, you should sort these in
alphanumerically. q before r before s etc.
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490.dtsi b/arch/arm64/boot/dts/qcom/qcm6490.dtsi
> new file mode 100644
> index 000000000000..b93270cae9ae
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490.dtsi
> @@ -0,0 +1,94 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "sc7280.dtsi"
> +
> +/*
> + * Delete unused sc7280 memory nodes and define the memory regions
> + * required by qcm6490
> + */
> +/delete-node/ &rmtfs_mem;
> +/delete-node/ &wlan_ce_mem;
> +
> +/{
> + reserved-memory {
> + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
> + reg = <0x0 0x81800000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + camera_mem: camera@84300000 {
> + reg = <0x0 0x84300000 0x0 0x500000>;
> + no-map;
> + };
> +
> + wpss_mem: wpss@0x84800000 {
> + reg = <0x0 0x84800000 0x0 0x1900000>;
> + no-map;
> + };
> +
> + adsp_mem: adsp@86100000 {
> + reg = <0x0 0x86100000 0x0 0x2800000>;
> + no-map;
> + };
> +
> + cdsp_mem: cdsp@88900000 {
> + reg = <0x0 0x88900000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + cvp_mem: cvp@8ac00000 {
> + reg = <0x0 0x8ac00000 0x0 0x500000>;
> + no-map;
> + };
> +
> + ipa_gsi_mem: ipa-gsi@8b110000 {
> + reg = <0x0 0x8b110000 0x0 0xa000>;
> + no-map;
> + };
> +
> + gpu_microcode_mem: gpu-microcode@8b11a000 {
> + reg = <0x0 0x8b11a000 0x0 0x2000>;
> + no-map;
> + };
> +
> + mpss_mem: mpss@8b800000 {
> + reg = <0x0 0x8b800000 0x0 0xf600000>;
> + no-map;
> + };
> +
> + tz_stat_mem: tz-stat@c0000000 {
> + reg = <0x0 0xc0000000 0x0 0x100000>;
> + no-map;
> + };
> +
> + tags_mem: tags@c0100000 {
> + reg = <0x0 0xc0100000 0x0 0x1200000>;
> + no-map;
> + };
> +
> + qtee_mem: qtee@c1300000 {
> + reg = <0x0 0xc1300000 0x0 0x500000>;
> + no-map;
> + };
> +
> + trusted_apps_mem: trusted_apps@c1800000 {
> + reg = <0x0 0xc1800000 0x0 0x3900000>;
> + no-map;
> + };
> + };
> +};
> +
> +&video_mem {
> + reg = <0x0 0x8a700000 0x0 0x500000>;
> +};
> +
> +&wifi {
> + memory-region = <&wlan_fw_mem>;
> +};
> +
> +&xbl_mem {
> + reg = <0x0 0x80700000 0x0 0x100000>;
> +};
> --
> 2.42.0
>
On 10/3/2023 2:33 PM, Bryan O'Donoghue wrote:
> On 03/10/2023 06:56, Komal Bajaj wrote:
>> Add qcm6490 devicetree file for QCM6490 SoC and QCM6490 IDP
>> platform. QCM6490 is derived from SC7280 meant for various
>> form factor including IoT.
>>
>> Supported features are, as of now:
>> * Debug UART
>> * eMMC
>> * USB
>>
>> Signed-off-by: Komal Bajaj <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 335 +++++++++++++++++++++++
>> arch/arm64/boot/dts/qcom/qcm6490.dtsi | 94 +++++++
>> 3 files changed, 430 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile
>> b/arch/arm64/boot/dts/qcom/Makefile
>> index 73c3be0f8872..3a2d9dbaacce 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=
>> msm8998-sony-xperia-yoshino-maple.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>> b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>> new file mode 100644
>> index 000000000000..ab9fa9197fe3
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>> @@ -0,0 +1,335 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +#include "qcm6490.dtsi"
> This include should go last
Got it.
>
>> +#include "pm7325.dtsi"
>> +#include "pm8350c.dtsi"
>> +#include "pmk8350.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. QCM6490 IDP";
>> + compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
>> +
>> + aliases {
>> + serial0 = &uart5;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + regulators-0 {
>> + compatible = "qcom,pm7325-rpmh-regulators";
>> + qcom,pmic-id = "b";
>> +
>> + vreg_s1b_1p8: smps1 {
>> + regulator-min-microvolt = <1856000>;
>> + regulator-max-microvolt = <2040000>;
>> + };
>> +
>> + vreg_s7b_0p9: smps7 {
>> + regulator-min-microvolt = <535000>;
>> + regulator-max-microvolt = <1120000>;
>> + };
>> +
>> + vreg_s8b_1p2: smps8 {
>> + regulator-min-microvolt = <1256000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
>> + };
>> +
>> + vreg_l1b_0p8: ldo1 {
>> + regulator-min-microvolt = <825000>;
>> + regulator-max-microvolt = <925000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2b_3p0: ldo2 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6b_1p2: ldo6 {
>> + regulator-min-microvolt = <1140000>;
>> + regulator-max-microvolt = <1260000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7b_2p9: ldo7 {
>> + regulator-min-microvolt = <2960000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8b_0p9: ldo8 {
>> + regulator-min-microvolt = <870000>;
>> + regulator-max-microvolt = <970000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9b_1p2: ldo9 {
>> + regulator-min-microvolt = <1080000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11b_1p7: ldo11 {
>> + regulator-min-microvolt = <1504000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12b_0p8: ldo12 {
>> + regulator-min-microvolt = <751000>;
>> + regulator-max-microvolt = <824000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13b_0p8: ldo13 {
>> + regulator-min-microvolt = <530000>;
>> + regulator-max-microvolt = <824000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l14b_1p2: ldo14 {
>> + regulator-min-microvolt = <1080000>;
>> + regulator-max-microvolt = <1304000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l15b_0p8: ldo15 {
>> + regulator-min-microvolt = <765000>;
>> + regulator-max-microvolt = <1020000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l16b_1p2: ldo16 {
>> + regulator-min-microvolt = <1100000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l17b_1p8: ldo17 {
>> + regulator-min-microvolt = <1700000>;
>> + regulator-max-microvolt = <1900000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l18b_1p8: ldo18 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l19b_1p8: ldo19 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>> +
>> + regulators-1 {
>> + compatible = "qcom,pm8350c-rpmh-regulators";
>> + qcom,pmic-id = "c";
>> +
>> + vreg_s1c_2p2: smps1 {
>> + regulator-min-microvolt = <2190000>;
>> + regulator-max-microvolt = <2210000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_s9c_1p0: smps9 {
>> + regulator-min-microvolt = <1010000>;
>> + regulator-max-microvolt = <1170000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l1c_1p8: ldo1 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1980000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l2c_1p8: ldo2 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <1980000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3c_3p0: ldo3 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <3540000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l4c_1p8: ldo4 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l5c_1p8: ldo5 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l6c_2p9: ldo6 {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <2950000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l7c_3p0: ldo7 {
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l8c_1p8: ldo8 {
>> + regulator-min-microvolt = <1620000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l9c_2p9: ldo9 {
>> + regulator-min-microvolt = <2960000>;
>> + regulator-max-microvolt = <2960000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l10c_0p8: ldo10 {
>> + regulator-min-microvolt = <720000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l11c_2p8: ldo11 {
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l12c_1p8: ldo12 {
>> + regulator-min-microvolt = <1650000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l13c_3p0: ldo13 {
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3544000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_bob: bob {
>> + regulator-min-microvolt = <3008000>;
>> + regulator-max-microvolt = <3960000>;
>> + };
>> + };
>> +};
>> +
>> +&gpi_dma0 {
>> + status = "okay";
>> +};
>> +
>> +&gpi_dma1 {
>> + status = "okay";
>> +};
>> +
>> +&qupv3_id_0 {
>> + status = "okay";
>> +};
>> +
>> +&qupv3_id_1 {
>> + status = "okay";
>> +};
>> +
>> +&sdhc_1 {
>> + non-removable;
>> + no-sd;
>> + no-sdio;
>> +
>> + vmmc-supply = <&vreg_l7b_2p9>;
>> + vqmmc-supply = <&vreg_l19b_1p8>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&uart5 {
>> + compatible = "qcom,geni-debug-uart";
>> + status = "okay";
>> +};
>> +
>> +&usb_1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> + dr_mode = "peripheral";
>> +};
>> +
>> +&usb_1_hsphy {
>> + vdda-pll-supply = <&vreg_l10c_0p8>;
>> + vdda33-supply = <&vreg_l2b_3p0>;
>> + vdda18-supply = <&vreg_l1c_1p8>;
>> + qcom,hs-rise-fall-time-bp = <0>;
>> + qcom,squelch-detector-bp = <(-2090)>;
>> + qcom,hs-disconnect-bp = <1743>;
>> + qcom,hs-amplitude-bp = <1780>;
>> + qcom,hs-crossover-voltage-microvolt = <(-31000)>;
>> + qcom,hs-output-impedance-micro-ohms = <2600000>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_1_qmpphy {
>> + vdda-phy-supply = <&vreg_l6b_1p2>;
>> + vdda-pll-supply = <&vreg_l1b_0p8>;
>> +
>> + status = "okay";
>> +};
>> +
>> +/* PINCTRL - additions to nodes defined in sc7280.dtsi */
>> +
>> +&pm8350c_pwm {
>> + status = "okay";
>> +};
>> +
>> +&qup_uart5_tx {
>> + drive-strength = <2>;
>> + bias-disable;
>> +};
>> +
>> +&qup_uart5_rx {
>> + drive-strength = <2>;
>> + bias-pull-up;
>> +};
>> +
>> +&sdc1_clk {
>> + bias-disable;
>> + drive-strength = <16>;
>> +};
>> +
>> +&sdc1_cmd {
>> + bias-pull-up;
>> + drive-strength = <10>;
>> +};
>> +
>> +&sdc1_data {
>> + bias-pull-up;
>> + drive-strength = <10>;
>> +};
>> +
>> +&sdc1_rclk {
>> + bias-pull-down;
>> +};
>
> These nodes are out-of-order too, you should sort these in
> alphanumerically. q before r before s etc.
Got it. Will sort these nodes.
Thanks
Komal
>
>> diff --git a/arch/arm64/boot/dts/qcom/qcm6490.dtsi
>> b/arch/arm64/boot/dts/qcom/qcm6490.dtsi
>> new file mode 100644
>> index 000000000000..b93270cae9ae
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcm6490.dtsi
>> @@ -0,0 +1,94 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> + */
>> +
>> +#include "sc7280.dtsi"
>> +
>> +/*
>> + * Delete unused sc7280 memory nodes and define the memory regions
>> + * required by qcm6490
>> + */
>> +/delete-node/ &rmtfs_mem;
>> +/delete-node/ &wlan_ce_mem;
>> +
>> +/{
>> + reserved-memory {
>> + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
>> + reg = <0x0 0x81800000 0x0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + camera_mem: camera@84300000 {
>> + reg = <0x0 0x84300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + wpss_mem: wpss@0x84800000 {
>> + reg = <0x0 0x84800000 0x0 0x1900000>;
>> + no-map;
>> + };
>> +
>> + adsp_mem: adsp@86100000 {
>> + reg = <0x0 0x86100000 0x0 0x2800000>;
>> + no-map;
>> + };
>> +
>> + cdsp_mem: cdsp@88900000 {
>> + reg = <0x0 0x88900000 0x0 0x1e00000>;
>> + no-map;
>> + };
>> +
>> + cvp_mem: cvp@8ac00000 {
>> + reg = <0x0 0x8ac00000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + ipa_gsi_mem: ipa-gsi@8b110000 {
>> + reg = <0x0 0x8b110000 0x0 0xa000>;
>> + no-map;
>> + };
>> +
>> + gpu_microcode_mem: gpu-microcode@8b11a000 {
>> + reg = <0x0 0x8b11a000 0x0 0x2000>;
>> + no-map;
>> + };
>> +
>> + mpss_mem: mpss@8b800000 {
>> + reg = <0x0 0x8b800000 0x0 0xf600000>;
>> + no-map;
>> + };
>> +
>> + tz_stat_mem: tz-stat@c0000000 {
>> + reg = <0x0 0xc0000000 0x0 0x100000>;
>> + no-map;
>> + };
>> +
>> + tags_mem: tags@c0100000 {
>> + reg = <0x0 0xc0100000 0x0 0x1200000>;
>> + no-map;
>> + };
>> +
>> + qtee_mem: qtee@c1300000 {
>> + reg = <0x0 0xc1300000 0x0 0x500000>;
>> + no-map;
>> + };
>> +
>> + trusted_apps_mem: trusted_apps@c1800000 {
>> + reg = <0x0 0xc1800000 0x0 0x3900000>;
>> + no-map;
>> + };
>> + };
>> +};
>> +
>> +&video_mem {
>> + reg = <0x0 0x8a700000 0x0 0x500000>;
>> +};
>> +
>> +&wifi {
>> + memory-region = <&wlan_fw_mem>;
>> +};
>> +
>> +&xbl_mem {
>> + reg = <0x0 0x80700000 0x0 0x100000>;
>> +};
>> --
>> 2.42.0
>>
>