2017-03-28 05:37:58

by Heiko Schocher

[permalink] [raw]
Subject: Re: [PATCH] Make EN2 pin optional in the TRF7970A driver

Hello all,

Am 21.02.2017 um 17:43 schrieb Rob Herring:
> On Sun, Feb 19, 2017 at 11:19 PM, Heiko Schocher <[email protected]> wrote:
>> Hello all,
>>
>> Am 13.02.2017 um 22:31 schrieb Rob Herring:
>>>
>>> On Mon, Feb 13, 2017 at 12:38 AM, Heiko Schocher <[email protected]> wrote:
>>>>
>>>> Hello Rob,
>>>>
>>>>
>>>> Am 10.02.2017 um 16:51 schrieb Rob Herring:
>>>>>
>>>>>
>>>>> On Tue, Feb 07, 2017 at 06:22:04AM +0100, Heiko Schocher wrote:
>>>>>>
>>>>>>
>>>>>> From: Guan Ben <[email protected]>
>>>>>>
>>>>>> Make the EN2 pin optional. This is useful for boards,
>>>>>> which have this pin fix wired, for example to ground.
>>>>>>
>>>>>> Signed-off-by: Guan Ben <[email protected]>
>>>>>> Signed-off-by: Mark Jonas <[email protected]>
>>>>>> Signed-off-by: Heiko Schocher <[email protected]>
>>>>>>
>>>>>> ---
>>>>>>
>>>>>> .../devicetree/bindings/net/nfc/trf7970a.txt | 4 ++--
>>>>>> drivers/nfc/trf7970a.c | 26
>>>>>> ++++++++++++----------
>>>>>> 2 files changed, 16 insertions(+), 14 deletions(-)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>>>>>> b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>>>>>> index 32b35a0..5889a3d 100644
>>>>>> --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>>>>>> +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>>>>>> @@ -5,8 +5,8 @@ Required properties:
>>>>>> - spi-max-frequency: Maximum SPI frequency (<= 2000000).
>>>>>> - interrupt-parent: phandle of parent interrupt handler.
>>>>>> - interrupts: A single interrupt specifier.
>>>>>> -- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on
>>>>>> the
>>>>>> - TRF7970A.
>>>>>> +- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2'
>>>>>> pins
>>>>>> on the
>>>>>> + TRF7970A. EN2 is optional.
>>>>>
>>>>>
>>>>>
>>>>> Could EN ever be optional/fixed? If so, perhaps deprecate this property
>>>>> and do 2 properties, one for each pin.
>>>>
>>>>
>>>>
>>>> The hardware I have has the EN2 pin fix connected to ground. Looking
>>>> into http://www.ti.com/lit/ds/slos743k/slos743k.pdf page 19 table 6-3
>>>> and 6-4 the EN2 pin is a don;t core if EN = 1. If EN = 0 EN2 pin
>>>> selects between Power Down and Sleep Mode ... I see no reason why
>>>> this is not possible/allowed ...
>>>>
>>>> Hmm.. I do not like the idea of deprecating the "ti,enable-gpios"
>>>> property into 2 seperate properties ... but if this would be a reason
>>>> for not accepting this patch, I can do this ... How should I name
>>>> the 2 new properties?
>>>
>>>
>>> I guess if this ever happens, then we just add "ti,enable2-gpios" and
>>> ti,enable-gpios continues to point to EN. We don't need to deprecate
>>> anything (or maybe just deprecate having both GPIOs on single
>>> property).
>>>
>>> In that case,
>>>
>>> Acked-by: Rob Herring <[email protected]>
>>
>>
>> gentle ping.
>>
>> Are there any more comments to this patch? Is it acceptable as it
>> is?
>
> I acked it, so yes, it is fine.

Gentle ping. Any more issues or can this patch go into mainline?

bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany