Three small fixes, all in the embedded ufs driver subsystem.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Can Guo (2):
scsi: ufs: Try to save power mode change and UIC cmd completion timeout
scsi: ufs: Fix unbalanced scsi_block_reqs_cnt caused by ufshcd_hold()
Qinglang Miao (1):
scsi: ufshcd: Fix missing destroy_workqueue()
And the diffstat:
drivers/scsi/ufs/ufshcd.c | 34 +++++++++++++++++++++++++++++-----
drivers/scsi/ufs/ufshcd.h | 2 ++
2 files changed, 31 insertions(+), 5 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b8f573a02713..7a160b86adc6 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1627,12 +1627,12 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
*/
fallthrough;
case CLKS_OFF:
- ufshcd_scsi_block_requests(hba);
hba->clk_gating.state = REQ_CLKS_ON;
trace_ufshcd_clk_gating(dev_name(hba->dev),
hba->clk_gating.state);
- queue_work(hba->clk_gating.clk_gating_workq,
- &hba->clk_gating.ungate_work);
+ if (queue_work(hba->clk_gating.clk_gating_workq,
+ &hba->clk_gating.ungate_work))
+ ufshcd_scsi_block_requests(hba);
/*
* fall through to check if we should wait for this
* work to be done or not.
@@ -2115,10 +2115,20 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd)
unsigned long flags;
if (wait_for_completion_timeout(&uic_cmd->done,
- msecs_to_jiffies(UIC_CMD_TIMEOUT)))
+ msecs_to_jiffies(UIC_CMD_TIMEOUT))) {
ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
- else
+ } else {
ret = -ETIMEDOUT;
+ dev_err(hba->dev,
+ "uic cmd 0x%x with arg3 0x%x completion timeout\n",
+ uic_cmd->command, uic_cmd->argument3);
+
+ if (!uic_cmd->cmd_active) {
+ dev_err(hba->dev, "%s: UIC cmd has been completed, return the result\n",
+ __func__);
+ ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT;
+ }
+ }
spin_lock_irqsave(hba->host->host_lock, flags);
hba->active_uic_cmd = NULL;
@@ -2150,6 +2160,7 @@ __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd,
if (completion)
init_completion(&uic_cmd->done);
+ uic_cmd->cmd_active = 1;
ufshcd_dispatch_uic_cmd(hba, uic_cmd);
return 0;
@@ -3807,10 +3818,18 @@ static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd)
dev_err(hba->dev,
"pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n",
cmd->command, cmd->argument3);
+
+ if (!cmd->cmd_active) {
+ dev_err(hba->dev, "%s: Power Mode Change operation has been completed, go check UPMCRS\n",
+ __func__);
+ goto check_upmcrs;
+ }
+
ret = -ETIMEDOUT;
goto out;
}
+check_upmcrs:
status = ufshcd_get_upmcrs(hba);
if (status != PWR_LOCAL) {
dev_err(hba->dev,
@@ -4902,11 +4921,14 @@ static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status)
ufshcd_get_uic_cmd_result(hba);
hba->active_uic_cmd->argument3 =
ufshcd_get_dme_attr_val(hba);
+ if (!hba->uic_async_done)
+ hba->active_uic_cmd->cmd_active = 0;
complete(&hba->active_uic_cmd->done);
retval = IRQ_HANDLED;
}
if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done) {
+ hba->active_uic_cmd->cmd_active = 0;
complete(hba->uic_async_done);
retval = IRQ_HANDLED;
}
@@ -8906,6 +8928,7 @@ void ufshcd_remove(struct ufs_hba *hba)
blk_mq_free_tag_set(&hba->tmf_tag_set);
blk_cleanup_queue(hba->cmd_queue);
scsi_remove_host(hba->host);
+ destroy_workqueue(hba->eh_wq);
/* disable interrupts */
ufshcd_disable_intr(hba, hba->intr_mask);
ufshcd_hba_stop(hba);
@@ -9206,6 +9229,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
exit_gating:
ufshcd_exit_clk_scaling(hba);
ufshcd_exit_clk_gating(hba);
+ destroy_workqueue(hba->eh_wq);
out_disable:
hba->is_irq_enabled = false;
ufshcd_hba_exit(hba);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 47eb1430274c..e0f00a42371c 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -64,6 +64,7 @@ enum dev_cmd_type {
* @argument1: UIC command argument 1
* @argument2: UIC command argument 2
* @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
* @done: UIC command completion
*/
struct uic_command {
@@ -71,6 +72,7 @@ struct uic_command {
u32 argument1;
u32 argument2;
u32 argument3;
+ int cmd_active;
struct completion done;
};
The pull request you sent on Fri, 13 Nov 2020 16:20:13 -0800:
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/0c0451112b629946c93ed2102b7ae47d4d1dc0bc
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/prtracker.html